address.
When loading a dSYM, and the file addresses of the dSYM Sections are
different than the executable binary Sections' file addresses, the
debug info won't be remapped to the actual load addresses correctly.
This only happens with binaries on the in-memory shared cache binaries
where their File addresses have been set to their actual load address
(outside an offset value) whereas the original executable and dSYM
have 0-based File addresses.
I think this patch will not be activated for other cases -- this is
the only case we know of where the dSYM and the executable's File
addresses differ -- but if this causes other problems we can restrict
it more carefully.
<rdar://problem/12335086>
llvm-svn: 188532
LLDB needs in memory module load level settings to control how much information is read from memory when loading in memory modules. This change adds a new setting:
(lldb) settings set target.memory-module-load-level [minimal|partial|complete]
minimal will load only sections (no symbols, or function bounds via function starts or EH frame)
partial will load sections + bounds
complete will load sections + bounds + symbols
llvm-svn: 188246
- Immediates can be shown as hex (either Intel or MASM style)
- See TestSettings.py for usage examples
- Verified to cause no regressions on Linux x86_64 (Ubuntu 12.10)
Patch by Richard Mitton!
llvm-svn: 187921
Fixed a crasher when using memory threads where a thread is sticking around too long and was causing problems when it didn't have a thread plan.
llvm-svn: 187395
LLDB requires that the inferior process be stopped before, and remain
stopped during, certain accesses to process state.
Previously this was achieved with a POSIX rwlock which had a write lock
taken for the duration that the process was running, and released when
the process was stopped. Any access to process state was performed with
a read lock held.
However, POSIX requires that pthread_rwlock_unlock() be called from the
same thread as pthread_rwlock_wrlock(), and lldb needs to stop and start
the process from different threads. Violating this constraint is
technically undefined behaviour, although as it happens Linux and Darwin
result in the unlock proceeding in this case. FreeBSD follows POSIX
more strictly, and the unlock would fail, resulting in a hang later upon
the next attempt to take the lock.
All read lock consumers use ReadTryLock() and handle failure to obtain
the lock (typically by logging an error "process is running"). Thus,
instead of using the lock state itself to track the running state, this
change adds an explicit m_running flag. ReadTryLock tests the flag, and
if the process is not running it returns with the read lock held.
WriteLock and WriteTryLock are renamed to SetRunning and TrySetRunning,
and (if successful) they set m_running with the lock held. This way,
read consumers can determine if the process is running and act
appropriately, and write consumers are still held off from starting the
process if read consumers are active.
Note that with this change there are still some curious access patterns,
such as calling WriteUnlock / SetStopped twice in a row, and there's no
protection from multiple threads trying to simultaneously start the
process. In practice this does not seem to be a problem, and was
exposing other undefined POSIX behaviour prior to this change.
llvm-svn: 187377
Also move the logic to shorten thread names from linux/Host.cpp to a new
SetShortThreadName as both FreeBSD and Linux need the functionality.
llvm-svn: 187149
- ReadLocker constructors that take a lock
- Unconditional Lock::ReadLock and ReadLocker::Lock
(all consumers use TryLock)
- Make Unlock protected, as it has no external consumers
llvm-svn: 187147
and so the StackID changes with every step. Do so by checking the parent frame ID, and if it hasn't changed,
then we haven't stepped in.
rdar://problem/14516227
llvm-svn: 187094
ELF notes contain a 'name' field, which specifies a vendor who defines
the format of the note. Examples are 'FreeBSD' or 'GNU', or it may be
empty for generic notes.
Add a case for FreeBSD-specific notes, leaving Linux and GNU notes,
other vendor-specific notes, and generic notes to be handled by the
existing code for now.
Thanks to Samuel Jacob for reviewing and suggesting improvements.
llvm-svn: 186973
plan providers from a "ThreadPlan *" to a "lldb::ThreadPlanSP". That was needed to fix
a bug where the ThreadPlanStepInRange wasn't checking with its sub-plans to make sure they
succeed before trying to proceed further. If the sub-plan failed and as a result didn't make
any progress, you could end up retrying the same failing algorithm in an infinite loop.
<rdar://problem/14043602>
llvm-svn: 186618
Added a setting to control timeout for kdp response packets. While I was at it, I also added a way to control the response timeout for gdb-remote packets.
KDP defaults to 5 seconds, and GDB defaults to 1 second. These were the default values that were in the code prior to adding these settings.
(lldb) settings set plugin.process.gdb-remote.packet-timeout 10
(lldb) settings set plugin.process.kdp-remote.packet-timeout 10
llvm-svn: 186360
- MachO files now correctly extract the UUID all the time
- More file size and offset verification done for universal mach-o files to watch for truncated files
- ObjectContainerBSDArchive now supports enumerating all objects in BSD archives (.a files)
- lldb_private::Module() can not be properly constructed using a ModuleSpec for a .o file in a .a file
- The BSD archive plug-in shares its cache for GetModuleSpecifications() and the create callback
- Improved printing for ModuleSpec objects
llvm-svn: 186211
A long time ago we start with clang types that were created by the symbol files and there were many functions in lldb_private::ClangASTContext that helped. Later we create ClangASTType which contains a clang::ASTContext and an opauque QualType, but we didn't switch over to fully using it. There were a lot of places where we would pass around a raw clang_type_t and also pass along a clang::ASTContext separately. This left room for error.
This checkin change all type code over to use ClangASTType everywhere and I cleaned up the interfaces quite a bit. Any code that was in ClangASTContext that was type related, was moved over into ClangASTType. All code that used these types was switched over to use all of the new goodness.
llvm-svn: 186130
- ObjectFile::GetSymtab() and ObjectFile::ClearSymtab() no longer takes any flags
- Module coordinates with the object files and contain a unified section list so that object file and symbol file can share sections when they need to, yet contain their own sections.
Other cleanups:
- Fixed Symbol::GetByteSize() to not have the symbol table compute the byte sizes on the fly
- Modified the ObjectFileMachO class to compute symbol sizes all at once efficiently
- Modified the Symtab class to store a file address lookup table for more efficient lookups
- Removed Section::Finalize() and SectionList::Finalize() as they did nothing
- Improved performance of the detection of symbol files that have debug maps by excluding stripped files and core files, debug files, object files and stubs
- Added the ability to tell if an ObjectFile has been stripped with ObjectFile::IsStripped() (used this for the above performance improvement)
llvm-svn: 185990
There are two new classes:
lldb::SBModuleSpec
lldb::SBModuleSpecList
The SBModuleSpec wraps up a lldb_private::ModuleSpec, and SBModuleSpecList wraps up a lldb_private::ModuleSpecList.
llvm-svn: 185877
The build system is currently miss-identifying GNU/kFreeBSD as FreeBSD.
This kind of simplification is sometimes useful, but in general it's not correct.
As GNU/kFreeBSD is an hybrid system, for kernel-related issues we want to match the
build definitions used for FreeBSD, whereas for userland-related issues we want to
match the definitions used for other systems with Glibc.
The current modification adjusts the build system so that they can be distinguished,
and explicitly adds GNU/kFreeBSD to the build checks in which it belongs.
Fixes bug #16446.
Patch by Robert Millan in the context of Debian.
llvm-svn: 185313
been suitable for preparing a single IR function
for operation in the target. However, using blocks
and lambdas creates other IR functions that also
need to be processed.
I have audited IRForTarget to make it process
multiple functions. Where IRForTarget would add
new instructions at the beginning of the main
expression function, it now adds them on-demand
in the function where they are needed. This is
enabled by a system of FunctionValueCaches, which
invoke a lambda to create or derive the values as
needed, or report the result of that lambda if it
has already been called for the given function.
<rdar://problem/14180236>
llvm-svn: 185224
bother checking if a region is safe to use. In
cases where regions need to be synthesized rather
than properly allocated, the memory reads required
to determine whether the area is used are
- insufficient, because intermediate locations
could be in use, and
- unsafe, because on some platforms reading from
memory can trigger events.
All this only makes a difference on platforms
where memory allocation in the target is impossible.
Behavior on platforms where it is possible should
stay the same.
<rdar://problem/14023970>
llvm-svn: 185046
The semi-unofficial way of returning a status from a Python command was to return a string (e.g. return "no such variable was found") that LLDB would pick as a clue of an error having happened
This checkin changes that:
- SBCommandReturnObject now exports a SetError() call, which can take an SBError or a plain C-string
- script commands now drop any return value and expect the SBCommandReturnObject ("return object") to be filled in appropriately - if you do nothing, a success will be assumed
If your commands were relying on returning a value and having LLDB pick that up as an error, please change your commands to SetError() through the return object or expect changes in behavior
llvm-svn: 184893
Made sure that temporary object created from HarmonizeThreadIdsForProfileData() doesn’t get passed around without creating an object first.
Reviewed by Greg
llvm-svn: 184769
Specifically, the ${target ${process ${thread and ${frame specifiers have been extended to allow a subkeyword .script:<fctName> (e.g. ${frame.script:FooFunction})
The functions are prototyped as
def FooFunction(Object,unused)
where object is of the respective SB-type (SBTarget for target.script, ... and so on)
This has not been implemented for ${var because it would be akin to a Python summary which is already well-defined in LLDB
llvm-svn: 184500
dematerialization of registers that caused
conditional breakpoint expressions not to
work properly. Also added a testcase.
<rdar://problem/14129252>
llvm-svn: 184451
The script was able to point out and save 40 bytes in each lldb_private::Section by being very careful where we need to have virtual destructors and also by re-ordering members.
llvm-svn: 184364
//------------------------------------------------------------------
/// Get all types matching \a type_mask from debug info in this
/// module.
///
/// @param[in] type_mask
/// A bitfield that consists of one or more bits logically OR'ed
/// together from the lldb::TypeClass enumeration. This allows
/// you to request only structure types, or only class, struct
/// and union types. Passing in lldb::eTypeClassAny will return
/// all types found in the debug information for this module.
///
/// @return
/// A list of types in this module that match \a type_mask
//------------------------------------------------------------------
lldb::SBTypeList
SBModule::GetTypes (uint32_t type_mask)
//------------------------------------------------------------------
/// Get all types matching \a type_mask from debug info in this
/// compile unit.
///
/// @param[in] type_mask
/// A bitfield that consists of one or more bits logically OR'ed
/// together from the lldb::TypeClass enumeration. This allows
/// you to request only structure types, or only class, struct
/// and union types. Passing in lldb::eTypeClassAny will return
/// all types found in the debug information for this compile
/// unit.
///
/// @return
/// A list of types in this compile unit that match \a type_mask
//------------------------------------------------------------------
lldb::SBTypeList
SBCompileUnit::GetTypes (uint32_t type_mask = lldb::eTypeClassAny);
This lets you request types by filling out a mask that contains one or more bits from the lldb::TypeClass enumerations, so you can only get the types you really want.
llvm-svn: 184251
Modifying our data formatters matching algorithm to ensure that "const X*" is treated as equivalent to "X*"
Also, a couple improvements to the "lldb types" logging
llvm-svn: 184215
Only add the — (double dash) separator to a command syntax if it has any options to be separated from arguments
Also remove the unused Translate() method from CommandObject
llvm-svn: 184163
This is a rewrite of the command history facility of LLDB
It takes the history management out of the CommandInterpreter into its own CommandHistory class
It reimplements the command history command to allow more combinations of options to work correctly (e.g. com hist -c 1 -s 5)
It adds a new --wipe (-w) option to command history to allow clearing the history on demand
It extends the lldbtest runCmd: and expect: methods to allow adding commands to history if need be
It adds a test case for the reimplemented facility
llvm-svn: 184140
Jason Molenda