Summary:
This represents the adjustment applied to the implicit 'this' parameter
in the prologue of a virtual method in the MS C++ ABI. The adjustment is
always zero unless multiple inheritance is involved.
This increases the size of DISubprogram by 8 bytes, unfortunately. The
adjustment really is a signed 32-bit integer. If this size increase is
too much, we could probably win it back by splitting out a subclass with
info specific to virtual methods (virtuality, vindex, thisadjustment,
containingType).
Reviewers: aprantl, dexonsmith
Subscribers: aaboud, amccarth, llvm-commits
Differential Revision: http://reviews.llvm.org/D21614
llvm-svn: 274325
Change all the methods in LiveVariables that expect non-null
MachineInstr* to take MachineInstr& and update the call sites. This
clarifies the API, and designs away a class of iterator to pointer
implicit conversions.
llvm-svn: 274319
Convert a loop to a range-based for, using MachineInstr& instead of
MachineInstr* and removing an implicit conversion from iterator to
pointer.
llvm-svn: 274311
Use MachineInstr& over MachineInstr* to avoid implicit iterator to
pointer conversions. MachineInstr*-as-nullptr was being used as a flag
for whether the for loop terminated normally; I added an explicit `bool`
instead.
llvm-svn: 274310
integer.
Fixes issues on some architectures where we use arithmetic ops to build
vectors, which can cause bad things to happen for loads/stores of mixed
types.
Patch by Fiona Glaser
llvm-svn: 274307
This pass hoists duplicated computations in the program. The primary goal of
gvn-hoist is to reduce the size of functions before inline heuristics to reduce
the total cost of function inlining.
Pass written by Sebastian Pop, Aditya Kumar, Xiaoyu Hu, and Brian Rzycki.
Important algorithmic contributions by Daniel Berlin under the form of reviews.
Differential Revision: http://reviews.llvm.org/D19338
llvm-svn: 274305
TargetSubtargetInfo::overrideSchedPolicy takes two MachineInstr*
arguments (begin and end) that invite implicit conversions from
MachineInstrBundleIterator. One option would be to change their type to
an iterator, but since they don't seem to have been used since the API
was added in 2010, I'm deleting the dead code.
llvm-svn: 274304
Push MachineInstr& through helper APIs for consistency. This doesn't
remove any more implicit conversions, but it's a nice cleanup after
r274300.
llvm-svn: 274301
Switch to a range-based for in IfConverter::PredicateBlock and take
MachineInstr& in MaySpeculate to avoid an implicit conversion from
MachineBasicBlock::iterator to MachineInstr*.
llvm-svn: 274290
Debug iterators are valuable so we don't want to turn them off
completely. However, llvm-tblgen is critical to build speed, so we can
skip them here.
Regenerating X86GenSubtargetInfo.inc in a clang-cl self-host debug build
now takes 39s instead of 1m29s.
Helps PR28222
llvm-svn: 274288
This is a mechanical change to make TargetLowering API take MachineInstr&
(instead of MachineInstr*), since the argument is expected to be a valid
MachineInstr. In one case, changed a parameter from MachineInstr* to
MachineBasicBlock::iterator, since it was used as an insertion point.
As a side effect, this removes a bunch of MachineInstr* to
MachineBasicBlock::iterator implicit conversions, a necessary step
toward fixing PR26753.
llvm-svn: 274287
Summary: If AFL_DRIVER_EXTRA_STATS_FILENAME is set and valid, write to it peak_rss_mb and slowest_unit_time_sec. These are both stats that libFuzzer can print but afl cannot.
Reviewers: kcc, aizatsky, metzman
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D21742
llvm-svn: 274273
When compiling with modules, header A and B can be in the same module M.
B depends on intrinsics_gen and A doesn't. Compiling a source file #include-ing
header A, we implicitly request module M to be built. It puts header A and B in
the same TU and tries to build them. Since B depends on intrinsics_gen (which
might not be built yet) we run into build failures.
This should fix our modules buildbot.
Patch reviewed by Chris Bieneman.
llvm-svn: 274270
associated reporting guide.
I want to emphasize that at this point these are just drafts!
This is the result of very extended discussion on the mailing lists on
several different threads:
http://lists.llvm.org/pipermail/llvm-dev/2015-October/091218.htmlhttp://lists.llvm.org/pipermail/llvm-dev/2016-May/099120.htmlhttp://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20151019/307070.html
The reporting guide in particular I anticipate will be shaped somewhat
by the advisory committee when they are selected. But hopefully this
serves as a good starting point and good guidance while the advisory
committee is being sorted out.
I'd like to thank all the folks who contributed to this. Many, *many*
people worked to help with drafting, wording, suggestions, and edits.
Also, this is based on widely used existing codes of coduct as mentioned
in the text, and the original authors of those deserve many thanks as
well.
Differential Revision: http://reviews.llvm.org/D13741
llvm-svn: 274268
Except the seed uniform instructions (conditional branch and consecutive ptr
instructions), dependencies to be added into uniform set should only be used
by existing uniform instructions or intructions outside of current loop.
Differential Revision: http://reviews.llvm.org/D21755
llvm-svn: 274262
When concatenating two error lists the ErrorList::join method (which is called
by joinErrors) was failing to set the checked bit on the second error, leading
to a 'failure to check error' assertion.
llvm-svn: 274249
Somehow all the functionality to write PDB files got removed,
probably accidentally when uploading the patch perhaps the wrong
one got uploaded. This re-adds all the code, as well as the
corresponding test.
llvm-svn: 274248
This reverts commit 3db82f646a0890eb7664d0351b5a3c79622e8bef.
Vassil already fixed this and I mechanically undid his fix without looking
too close at what I'm actually doing. Need more coffee.
llvm-svn: 274242
This fixes a typo introduced in r274196.
Thanks to Vassil Vassilev for noticing!
http://reviews.llvm.org/D21827
rdar://problem/27019000
llvm-svn: 274240
Summary:
MSVC provide exception handlers with enhanced information to deal with security buffer feature (/GS).
To be more secure, the security cookies (GS and SEH) are validated when unwinding the stack.
The following code:
```
void f() {}
void foo() {
__try {
f();
} __except(1) {
f();
}
}
```
Reviewers: majnemer, rnk
Subscribers: thakis, llvm-commits, chrisha
Differential Revision: http://reviews.llvm.org/D21101
llvm-svn: 274239
Summary:
Found cases where DSE incorrectly add partially-overwritten intervals.
Please see the test case for details.
Reviewers: mcrosier, eeckstein, hfinkel
Subscribers: mcrosier, llvm-commits
Differential Revision: http://reviews.llvm.org/D21859
llvm-svn: 274237
This processor feature had been left out by mistake from the z13
ProcessorModel.
This time with updated test case. Thanks, Hans.
Reviewed by Ulrich Weigand.
llvm-svn: 274216
CodeView need to know the offset of the storage allocation for a
bitfield. Encode this via the "extraData" field in DIDerivedType and
introduced a new flag, DIFlagBitField, to indicate whether or not a
member is a bitfield.
This fixes PR28162.
Differential Revision: http://reviews.llvm.org/D21782
llvm-svn: 274200
re-insertion of entries into the worklist moves them to the end.
This is fairly similar to a SetVector, but helps in the case where in
addition to not inserting duplicates you want to adjust the sequence of
a pop-off-the-back worklist.
I'm not at all attached to the name of this data structure if others
have better suggestions, but this is one that David Majnemer brought up
in IRC discussions that seems plausible.
I've trimmed the interface down somewhat from SetVector's interface
because several things make less sense here IMO: iteration primarily.
I'd prefer to add these back as we have users that need them. My use
case doesn't even need all of what is provided here. =]
I've also included a basic unittest to make sure this functions
reasonably.
Differential Revision: http://reviews.llvm.org/D21866
llvm-svn: 274198
This patch makes CFLAA answer some ModRef queries. Because we don't
distinguish between reading/writing when making StratifiedSets, we're
unable to offer any of the readonly-related answers.
Patch by Jia Chen.
Differential Revision: http://reviews.llvm.org/D21858
llvm-svn: 274197
On Darwin it is currently impossible to build LLVM with modules
because the Darwin system module map is not compatible with
-fmodules-local-submodule-visibility at this point in time. This
patch makes the flag optional and off by default on Darwin so it
becomes possible to build LLVM with modules again.
http://reviews.llvm.org/D21827
rdar://problem/27019000
llvm-svn: 274196
- Use range based for loops
- No need for some !Reg checks: isPhysicalRegister() reports false for
NoRegister anyway
- Do not repeat function name in documentation comment.
- Do not repeat documentation comment in implementation when we already
have one at the declaration.
- Factor some common subexpressions out.
- Change file comments to use doxygen syntax.
llvm-svn: 274194
Add an explicit overload to BuildMI for MachineInstr& to deal with
insertions inside of instruction bundles.
- Use it to re-implement MachineInstr* to give it coverage.
- Document how the overload for MachineBasicBlock::instr_iterator
differs from that for MachineBasicBlock::iterator (the previous
(implicit) overload for MachineInstr&).
- Add a comment explaining why the MachineInstr& and MachineInstr*
overloads don't universally forward to the
MachineBasicBlock::instr_iterator overload.
Thanks to Justin for noticing the API quirk. While this doesn't fix any
known bugs -- all uses of BuildMI with a MachineInstr& were previously
using MachineBasicBlock::iterator -- it protects against future bugs.
llvm-svn: 274193
This is mostly a mechanical change to make TargetInstrInfo API take
MachineInstr& (instead of MachineInstr* or MachineBasicBlock::iterator)
when the argument is expected to be a valid MachineInstr. This is a
general API improvement.
Although it would be possible to do this one function at a time, that
would demand a quadratic amount of churn since many of these functions
call each other. Instead I've done everything as a block and just
updated what was necessary.
This is mostly mechanical fixes: adding and removing `*` and `&`
operators. The only non-mechanical change is to split
ARMBaseInstrInfo::getOperandLatencyImpl out from
ARMBaseInstrInfo::getOperandLatency. Previously, the latter took a
`MachineInstr*` which it updated to the instruction bundle leader; now,
the latter calls the former either with the same `MachineInstr&` or the
bundle leader.
As a side effect, this removes a bunch of MachineInstr* to
MachineBasicBlock::iterator implicit conversions, a necessary step
toward fixing PR26753.
Note: I updated WebAssembly, Lanai, and AVR (despite being
off-by-default) since it turned out to be easy. I couldn't run tests
for AVR since llc doesn't link with it turned on.
llvm-svn: 274189
- Use range based for
- Use the more common variable names MBB and MF for
MachineBasicBlock/MachineFunction variables.
- Add a few const modifiers
llvm-svn: 274187
The NewArchiveIterator class has a problem: it requires too much context. Any
memory buffers added to the archive must be stored within an Archive::Member,
which must have an associated Archive. This makes it harder than necessary
to create new archive members (or new archives entirely) from scratch using
memory buffers.
This patch replaces NewArchiveIterator with a NewArchiveMember class that
stores just the memory buffer and the information that goes into the archive
member header.
Differential Revision: http://reviews.llvm.org/D21721
llvm-svn: 274183
This fixes an issue where occurrence counts would be unexpectedly
reset when parsing different parts of a command line multiple
times.
**ORIGINAL COMMIT MESSAGE**
This allows command line tools to use syntaxes like the following:
llvm-foo.exe command1 -o1 -o2
llvm-foo.exe command2 -p1 -p2
Where command1 and command2 contain completely different sets of
valid options. This is backwards compatible with previous uses
of llvm cl which did not support subcommands, as any option
which specifies no optional subcommand (e.g. all existing
code) goes into a special "top level" subcommand that expects
dashed options to appear immediately after the program name.
For example, code which is subcommand unaware would generate
a command line such as the following, where no subcommand
is specified:
llvm-foo.exe -q1 -q2
The top level subcommand can co-exist with actual subcommands,
as it is implemented as an actual subcommand which is searched
if no explicit subcommand is specified. So llvm-foo.exe as
specified above could be written so as to support all three
aforementioned command lines simultaneously.
There is one additional "special" subcommand called AllSubCommands,
which can be used to inject an option into every subcommand.
This is useful to support things like help, so that commands
such as:
llvm-foo.exe --help
llvm-foo.exe command1 --help
llvm-foo.exe command2 --help
All work and display the help for the selected subcommand
without having to explicitly go and write code to handle each
one separately.
This patch is submitted without an example of anything actually
using subcommands, but a followup patch will convert the
llvm-pdbdump tool to use subcommands.
Reviewed By: beanz
llvm-svn: 274171
This is a fix for PR27842.
An IR-level implementation of stack coloring tailored to work with
SafeStack. It is a bit weaker than the MI implementation in that it
does not the "lifetime start at first access" logic. This can be
improved in the future.
This patch also replaces the naive implementation of stack frame
layout with a greedy algorithm that can split existing stack slots
and even fit small objects inside the alignment padding of other
objects.
llvm-svn: 274162
[x86] (PR15455) While (ins|outs)[bwld] instructions do not take %dx as a
memory operand, various unofficial references do and objdump
disassembles to this format. Extend special treatment of
similar (in|out)[bwld] operations.
Reviewers: craig.topper, rnk, ab
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D18837
llvm-svn: 274152
This fixes pr28072.
The point, as Duncan pointed out, is that the file is already
partially linked by just reading it.
Long term I think the solution is to make metadata owned by the module
and then the linker will lazily read it and be in charge of all the
linking. Running a verifier in each input will defeat the lazy
loading, but will be legal.
Right now we are at the unfortunate position that to support odr
merging we cannot verify the inputs, which mildly annoying (see test
update).
llvm-svn: 274148
Summary: This adds tests for covering all cases that FoldAndOfFCmps and FoldOrOfFCmps handle.
Reviewers: spatel
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D21844
llvm-svn: 274144
I'm planning on extending these two tests with checks that validate
html coverage reports. Make it easier to extend them by not using a
prefix called "CHECK".
llvm-svn: 274143
When lowering two blended PACKUS, we used to disregard the types
of the PACKUS inputs, indiscriminately generating a v16i8 PACKUS.
This leads to non-selectable things like:
(v16i8 (PACKUS (v4i32 v0), (v4i32 v1)))
Instead, check that the PACKUSes have the same type, and use that
as the final result type.
llvm-svn: 274138
In -output-dir mode, file reports are placed into a "coverage"
directory. If filenames in the coverage mapping contain "..", they might
escape out of this directory.
Fix the problem by removing ".." from source filenames (expand the path
component).
llvm-svn: 274135
This gets rid of the memory fence in the hot path (dereferencing the
ManagedStatic), trading for an extra mutex lock in the cold path (when
the ManagedStatic was uninitialized). Since this only happens on the
first accesses it shouldn't matter much. On strict architectures like
x86 this removes any atomic instructions from the hot path.
Also remove the tsan annotations, tsan knows how standard atomics work
so they should be unnecessary now.
llvm-svn: 274131
This reverts commit 520a8298d8ef676b5da617ba3d2c7fa37381e939 (r273055).
This is breaking stage2 instrumented builds with "malformed coverage
data" errors.
llvm-svn: 274106
This is breaking an optimizaton remark test in clang. I've identified a couple fixes for that, but want to understand it better before I commit to anything.
llvm-svn: 274102
For the new hotness attribute, the API will take the pass rather than
the pass name so we can no longer play the trick of AlwaysPrint being a
special pass name. This adds a getter to help the transition.
There is also a corresponding clang patch.
llvm-svn: 274100
If a operation for a recurrence is an addition with no signed wrap and both input sign bits are 0, then the result sign bit must also be 0. Similar for the negative case.
I found this deficiency while playing around with a loop in the x86 backend that contained a signed division that could be optimized into an unsigned division if we could prove both inputs were positive. One of them being the loop induction variable. With this patch we can perform the conversion for this case. One of the test cases here is a contrived variation of the loop I was looking at.
Differential revision: http://reviews.llvm.org/D21493
llvm-svn: 274098
Revert "[InstCombine] Combine A->B->A BitCast"
as this appears to cause PR27996 and as discussed in http://reviews.llvm.org/D20847
This reverts commits r270135 and r263734.
llvm-svn: 274094
This allows us to query about the endianness without having to
look at DataLayout. The API will be used (and tested) in lld,
in order to find out the endianness of BitcodeFiles.
Briefly discussed with Rafael.
llvm-svn: 274090
- Add renderView{Header,Footer}, renderLineSuffix, and hasSubViews to
support creating tables with nested views.
- Move the 'Format' cl::opt to make it easier to extend.
- Just create one function view file, instead of overwriting the same
file for every new function. Add a regression test for this.
llvm-svn: 274086
and its clients to use the new llvm::Error model for error handling.
Changed getAsArchive() from ErrorOr<...> to Expected<...> so now all
interfaces there use the new llvm::Error model for return values.
In the two places it had if (!Parent) this is actually a program error so changed
from returning errorCodeToError(object_error::parse_failed) to calling
report_fatal_error() with a message.
In getObjectForArch() added error messages to its two llvm::Error return values
instead of returning errorCodeToError(object_error::arch_not_found) with no
error message.
For the llvm-obdump, llvm-nm and llvm-size clients since the only binary files in
Mach-O Universal Binaries that are supported are Mach-O files or archives with
Mach-O objects, updated their logic to generate an error when a slice contains
something like an ELF binary instead of ignoring it. And added a test case for
that.
The last error stuff to be cleaned up for libObject’s MachOUniversalBinary is
the use of errorOrToExpected(Archive::create(ObjBuffer)) which needs
Archive::create() to be changed from ErrorOr<...> to Expected<...> first,
which I’ll work on next.
llvm-svn: 274079
Summary:
This fixes bug: https://llvm.org/bugs/show_bug.cgi?id=28282
Currently the cost model of constant hoisting checks the bit width of the data type of the constants.
However, the actual immediate value is small enough and not need to be hoisted.
This patch checks for the actual bit width needed for the constant.
Reviewers: t.p.northover, rengolin
Subscribers: aemerson, rengolin, llvm-commits
Differential Revision: http://reviews.llvm.org/D21668
llvm-svn: 274073
Summary: LLVM assumes that large clearance will hide the partial register spill penalty. But in our experiment, 16 clearance is too small. As the inserted XOR is normally fairly cheap, we should have a higher clearance threshold to aggressively insert XORs that is necessary to break partial register dependency.
Reviewers: wmi, davidxl, stoklund, zansari, myatsina, RKSimon, DavidKreitzer, mkuper, joerg, spatel
Subscribers: davidxl, llvm-commits
Differential Revision: http://reviews.llvm.org/D21560
llvm-svn: 274068
Our existing yaml::Output code writes tags immediately when mapTag is called, without any state handling. This results in tags on sequence elements being written before the element itself. For example, we see this:
SomeArray: !elem_type
- key1: 1
key2: 2 !elem_type2
- key3: 3
key4: 4
We should instead see:
SomeArray:
- !elem_type
key1: 1
key2: 2
- !elem_type2
key3: 3
key4: 4
Our reader handles reading properly, so this bug only impacts writing yaml sequences with tagged elements.
As a test for this I've modified the Mach-O yaml encoding to allways apply the !mach-o tag when encoding MachOYAML::Object entries. This results in the !mach-o tag appearing as expected in dumped fat files.
llvm-svn: 274067
Summary: SystemZ shift instructions only use the last 6 bits of the shift
amount. When the result of an AND operation is used as a shift amount, this
means that we can use the NILL instruction (which operates on the last 16 bits)
rather than NILF (which operates on the last 32 bits) for a 16-bit savings in
instruction size.
Reviewers: uweigand
Subscribers: llvm-commits
Author: colpell
Committing on behalf of Elliot.
Differential Revision: http://reviews.llvm.org/D21686
llvm-svn: 274066
I think this converts all the simple cases that really just care about
the generated code being position independent or not. The remaining
uses are a bit more complicated and are checking things like "is this
a library or executable" or "can this symbol be preempted".
llvm-svn: 274055
This allows command line tools to use syntaxes like the following:
llvm-foo.exe command1 -o1 -o2
llvm-foo.exe command2 -p1 -p2
Where command1 and command2 contain completely different sets of
valid options. This is backwards compatible with previous uses
of llvm cl which did not support subcommands, as any option
which specifies no optional subcommand (e.g. all existing
code) goes into a special "top level" subcommand that expects
dashed options to appear immediately after the program name.
For example, code which is subcommand unaware would generate
a command line such as the following, where no subcommand
is specified:
llvm-foo.exe -q1 -q2
The top level subcommand can co-exist with actual subcommands,
as it is implemented as an actual subcommand which is searched
if no explicit subcommand is specified. So llvm-foo.exe as
specified above could be written so as to support all three
aforementioned command lines simultaneously.
There is one additional "special" subcommand called AllSubCommands,
which can be used to inject an option into every subcommand.
This is useful to support things like help, so that commands
such as:
llvm-foo.exe --help
llvm-foo.exe command1 --help
llvm-foo.exe command2 --help
All work and display the help for the selected subcommand
without having to explicitly go and write code to handle each
one separately.
This patch is submitted without an example of anything actually
using subcommands, but a followup patch will convert the
llvm-pdbdump tool to use subcommands.
Reviewed By: beanz
Differential Revision: http://reviews.llvm.org/D21485
llvm-svn: 274054
This is a resubmittion of 263158 change after fixing the existing problem with intrinsics mangling (see LTO and intrinsics mangling llvm-dev thread for details).
This patch fixes the problem which occurs when loop-vectorize tries to use @llvm.masked.load/store intrinsic for a non-default addrspace pointer. It fails with "Calling a function with a bad signature!" assertion in CallInst constructor because it tries to pass a non-default addrspace pointer to the pointer argument which has default addrspace.
The fix is to add pointer type as another overloaded type to @llvm.masked.load/store intrinsics.
Reviewed By: reames
Differential Revision: http://reviews.llvm.org/D17270
llvm-svn: 274043
This index lists the reports available in the 'coverage' sub-directory.
This will help navigate coverage output from large projects.
This commit factors the file creation code out of SourceCoverageView and
into CoveragePrinter.
llvm-svn: 274029
The original implementation attempted to zero registers using
XOR %foo, %foo. This is problematic because it constitutes a
read-modify-write of a register which might not be defined.
Instead, use MOV32r0 to avoid these problems; expandPostRAPseudo does
the right thing here.
llvm-svn: 274024
AVX1 can only broadcast vectors as floats/doubles, so for 256-bit vectors we insert bitcasts if we are shuffling v8i32/v4i64 types. Unfortunately the presence of these bitcasts prevents the current broadcast lowering code from peeking through cases where we have concatenated / extracted vectors to create the 256-bit vectors.
This patch allows us to peek through bitcasts as long as the number of elements doesn't change (i.e. element bitwidth is the same) so the broadcast index is not affected.
Note this bitcast peek is different from the stage later on which doesn't care about the type and is just trying to find a load node.
As we're being more aggressive with bitcasts, we also need to ensure that the broadcast type is correctly bitcasted
Differential Revision: http://reviews.llvm.org/D21660
llvm-svn: 274013
Some headers in IR depend on tablegen generated code. Modules builds triggered
generation of the LLVM_IR module (including headers dependant on intrinsic_gen),
imposing a unnecessary build dependency.
Reviewed by Richard Smith.
llvm-svn: 274006
This patch allows target shuffles to be combined to single input immediate permute instructions - (V)PSHUFD/VPERMILPD/VPERMILPS - allowing more general pattern matching than what we current do and improves the likelihood of memory folding compared to existing patterns which tend to reuse the input in multiple arguments.
Further permute instructions (V)PSHUFLW/(V)PSHUFHW/(V)PERMQ/(V)PERMPD may be added in the future but its proven tricky to create tests cases for them so far. (V)PSHUFLW/(V)PSHUFHW is already handled quite well in combineTargetShuffle so it may be that removing some of that code may allow us to perform more of the combining in one place without duplication.
Differential Revision: http://reviews.llvm.org/D21148
llvm-svn: 273999
This patch enhances dot graph viewer to show hot regions
with hot bbs/edges displayed in red. The ratio of the bb
freq to the max freq of the function needs to be no less
than the value specified by view-hot-freq-percent option.
The default value is 10 (i.e. 10%).
llvm-svn: 273996
MBFI supports profile count dumping and function
name based filtering. Add these two feature to
BFI as well. The filtering option is shared between
BFI and MBFI: -view-bfi-func-name=..
llvm-svn: 273992
If the load is conditional we can't hoist its 0-iteration instance to
the preheader because that would make it unconditional. Thus we would
access a memory location that the original loop did not access.
llvm-svn: 273991
BFI and MBFI's dot traits class share most of the
code and all future enhancement. This patch extracts
common implementation into base class BFIDOTGraphTraitsBase.
This patch also enables BFI graph to show branch probability
on edges as MBFI does before.
llvm-svn: 273990
Passing -output-dir path/to/dir to llvm-cov show creates path/to/dir if
it doesn't already exist, and prints reports into that directory.
In function view mode, all views are written into
path/to/dir/functions.$EXTENSION. In file view mode, all views are
written into path/to/dir/coverage/$PATH.$EXTENSION.
Changes since the initial commit:
- Avoid accidentally closing stdout twice.
llvm-svn: 273985
This reverts commit r273971. test/profile/instrprof-visibility.cpp is
failing because of an uncaught error in SafelyCloseFileDescriptor.
llvm-svn: 273978
Passing -output-dir path/to/dir to llvm-cov show creates path/to/dir if
it doesn't already exist, and prints reports into that directory.
In function view mode, all views are written into
path/to/dir/functions.$EXTENSION. In file view mode, all views are
written into path/to/dir/coverage/$PATH.$EXTENSION.
llvm-svn: 273971
the new pass manager.
This adds operator<< overloads for the various bits of the
LazyCallGraph, dump methods for use from the debugger, and debug logging
using them to the CGSCC pass manager.
Having this was essential for debugging the call graph update patch, and
I've extracted what I could from that patch here to minimize the delta.
llvm-svn: 273961
Apparently, MSVC complains if there's an implicit conversion from
`unsigned` to `unsigned long long`, if the `unsigned` is the result of
a bit shift.
llvm-svn: 273955
Reid Kleckner