Previously if !LegalOperations we would blindly call getBitcast and hope that getNode would constant fold it. But if the conversion is between a vector and a scalar, getNode has no simplification.
This means we would just get back the original N. We would then return that N which would make the caller of visitBITCAST think that we used CombineTo and did our own worklist management. This prevents target specific optimizations from being called for vector/scalar bitcasts until after legal operations.
llvm-svn: 331896
The try-lock guard change seems to be making this test fail on Mac, but
I haven't been able to reproduce the failure. Disabling the test on Mac
to fix build bot.
llvm-svn: 331894
This cleanup is designed to make the https://reviews.llvm.org/D32167 patch smaller and easier to read.
Cleanup in this patch:
Allow DWARFUnit subclasses to hand out the data that should be used when decoding data for a DIE. The information might be in .debug_info or could be in .debug_types. There is a new virtual function on DWARFUnit that each subclass must override:
virtual const lldb_private::DWARFDataExtractor &DWARFUnit::GetData() const;
This allows DWARFCompileUnit and eventually DWARFTypeUnit to hand out different data to be used when decoding the DIE information.
Add a new pure virtual function to get the size of the DWARF unit header:
virtual uint32_t DWARFUnit::GetHeaderByteSize() const = 0;
This allows DWARFCompileUnit and eventually DWARFTypeUnit to hand out different offsets where the first DIE starts when decoding DIE information from the unit.
Added a new function to DWARFDataExtractor to get the size of an offset:
size_t DWARFDataExtractor::GetDWARFSizeOfOffset() const;
Removed dead dumping and parsing code in the DWARFDebugInfo class.
Inlined a bunch of calls in DWARFUnit for accessors that were just returning integer member variables.
Renamed DWARFUnit::Size() to DWARFUnit::GetHeaderByteSize() as it clearly states what it is doing and makes more sense.
Differential Revision: https://reviews.llvm.org/D46606
llvm-svn: 331892
The condition was introduced in r267142 to mitigate a long compile-time
case. In r306087, a max-computation limit was introduced that should
handle the same case while leaving the max disjuncts heuristic it
should have replaced intact.
Today, the max disjuncts bail-out causes problems in that it prematurely
stops SCoPs from being detected, e.g. in SPEC's lbm. This would hit less
like if isl_set_coalesce would be called after isl_set_remove_divs
(which makes more basic_set likely to be coalescable) instead of before.
This patch tries to remove the premature max-disjuncts bail-out
condition by using simple_hull() to reduce the computational overhead,
instead of directly invalidating that SCoP.
Differential Revision: https://reviews.llvm.org/D45066
Contributed-by: Sahil Girish Yerawar <cs15btech11044@iith.ac.in>
llvm-svn: 331891
Summary:
I think there might be something to optimize in `atomic_store`.
Currently, if everything goes well (and we have a different new value), we
always iterate 3 times.
For example, `with a = 0`, `oldval = a`, `newval = 42`, we get:
```
oldval = 0, newval = 42, curval = 0
oldval = 0, newval = 42, curval = 42
oldval = 42, newval = 42, curval = 42
```
and then it breaks.
Unless I am not seeing something, I don't see a point to the third iteration.
If the current value is the one we want, we should just break.
This means that 2 iterations (with a different newval) should be sufficient to
achieve what we want.
Reviewers: dvyukov, alekseyshl
Reviewed By: dvyukov
Subscribers: kubamracek, delcypher, #sanitizers, llvm-commits
Differential Revision: https://reviews.llvm.org/D46597
llvm-svn: 331890
The previous value of 8192 resulted in severe compile time hits in
some pathological cases.
rdar://39781410
Differential Revision: https://reviews.llvm.org/D46581
llvm-svn: 331888
Summary:
1) In TestLinuxCore rather than skipping the tests on Windows, mark them as expected failures and add a bug reference
2) In dotest.py replace the undefined property in the exceptions with the actual property causing the exception
Reviewers: asmith, labath, zturner
Reviewed By: labath, zturner
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D46590
llvm-svn: 331886
Summary:
Unnormal values are a feature of some very old x87 processors. We handle
them correctly for the most part -- the only exception was an unnormal
value whose significand happened to be zero. In this case the APFloat
was still initialized as normal number (category = fcNormal), but a
subsequent toString operation would assert because the math would
produce nonsensical values for the zero significand.
During review, it was decided that the correct way to fix this is to
treat all unnormal values as NaNs (as that is what any >=386 processor
will do).
The issue was discovered because LLDB would crash when trying to print
some "long double" values.
Reviewers: skatkov, scanon, gottesmm
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D41868
llvm-svn: 331884
Summary:
The comments on this class were out of date with the implementation, and
the implementation itself was inconsistent with our usage of the Timeout
class (I started converting everything to use this class back in D27136,
but I missed this one). I avoid duplicating the waiting logic by
introducing a templated WaitFor function, and make other functions
delegate to that. This function can be also used as a replacement for
the unused WaitForBitToBeSet functions I removed, if it turns out to be
necessary.
As this changes the meaning of a "zero" timeout, I tracked down all the
callers of these functions and updated them accordingly. Propagating the
changes to all the callers of RunShellCommand was a bit too much for
this patch, so I stopped there and will continue that in a follow-up
patch.
I also add some basic unittests for the functions I modified.
Reviewers: jingham, clayborg
Subscribers: mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D46580
llvm-svn: 331880
If the global variables are marked as declare target and they need
ctors/dtors, these ctors/dtors are emitted and then invoked by the
offloading runtime library. They are not explicitly used in the emitted
code and thus can be optimized out. Patch marks these functions as used,
so the optimizer cannot remove these function during the optimization
phase.
llvm-svn: 331879
Added string literal helper function to obtain the type
attributed by a constant address space.
Also fixed predefind __func__ expr to use the helper
to constract the string literal correctly.
Differential Revision: https://reviews.llvm.org/D46049
llvm-svn: 331877
Summary:
Various path functions were not treating paths consisting of slashes
alone consistently. For example, the iterator-based accessors decomposed the
path "///" into two elements: "/" and ".". This is not too bad, but it
is different from the behavior specified by posix:
```
A pathname that contains ***at least one non-slash character*** and that
ends with one or more trailing slashes shall be resolved as if a single
dot character ( '.' ) were appended to the pathname.
```
More importantly, this was different from how we treated the same path
in the filename+parent_path functions, which decomposed this path into
"." and "". This was completely wrong as it lost the information that
this was an absolute path which referred to the root directory.
This patch fixes this behavior by making sure all functions treat paths
consisting of (back)slashes alone the same way as "/". I.e., the
iterator-based functions will just report one component ("/"), and the
filename+parent_path will decompose them into "/" and "".
A slightly controversial topic here may be the treatment of "//". Posix
says that paths beginning with "//" may have special meaning and indeed
we have code which parses paths like "//net/foo/bar" specially. However,
as we were already not being consistent in parsing the "//" string
alone, and any special parsing for it would complicate the code further,
I chose to treat it the same way as longer sequences of slashes (which
are guaranteed to be the same as "/").
Another slight change of behavior is in the parsing of paths like
"//net//". Previously the last component of this path was ".". However,
as in our parsing the "//net" part in this path was the same as the
"drive" part in "c:\" and the next slash was the "root directory", it
made sense to treat "//net//" the same way as "//net/" (i.e., not to add
the extra "." component at the end).
Reviewers: zturner, rnk, dblaikie, Bigcheese
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D45942
llvm-svn: 331876
Restrict the following keywords in the OpenCL C++ language mode,
according to Sections 2.2 & 2.9 of the OpenCL C++ 1.0 Specification.
- dynamic_cast
- typeid
- register (already restricted in OpenCL C, update the diagnostic)
- thread_local
- exceptions (try/catch/throw)
- access qualifiers read_only, write_only, read_write
Support the `__global`, `__local`, `__constant`, `__private`, and
`__generic` keywords in OpenCL C++. Leave the unprefixed address
space qualifiers such as global available, i.e., do not mark them as
reserved keywords in OpenCL C++. libclcxx provides explicit address
space pointer classes such as `global_ptr` and `global<T>` that are
implemented using the `__`-prefixed qualifiers.
Differential Revision: https://reviews.llvm.org/D46022
llvm-svn: 331874
With custom lowering for vector MULLH{S,U}, it is now profitable to
vectorize a divide by constant loop for the custom types (v16i8, v8i16,
and v4i32). The cost if based on TargetLowering::Build{S,U}DIV which
uses a multiply by constant plus adjustment to express a divide by
constant.
Both {u,s}mull{2} are expressed as Instruction::Mul and shifts by
Instruction::AShr.
llvm-svn: 331873
Its only two uses were removed in r311730.
Effectively reverts r304851 (but that code has removed around a bit since then).
https://reviews.llvm.org/D46619
clang side done in r331871.
llvm-svn: 331872
The new verifier check has found an error in the
debug-names-name-collisions.ll test on the PS4 bot:
error: Name Index @ 0x0: Entry @ 0xdc: mismatched Name of DIE @ 0x23: index - _ZN3foo3fooE; debug_info - foo.
Reverting while I investigate whether this is a bug in the verifier or
the generator.
This reverts commit r331868.
llvm-svn: 331869
Summary:
This patch implements a check which makes sure all entries required by
the DWARF v5 specification are present in the Name Index. The algorithm
tries to follow the wording of Section 6.1.1.1 of the spec as closely as
possible.
The main deviation from it is that instead of a whitelist-based approach
in the spec "The name index must contain an entry for each debugging
information entry that defines a named subprogram, label, variable,
type, or namespace" I chose a blacklist-based one, where I consider
everything to be "in" and then remove the entries that don't make sense.
I did this because it has more potential for catching interesting cases
and the above is a bit vague (it uses plain words like "variable" and
"subprogram", but the rest of the section speaks about specific TAGs).
This approach has raised some interesting questions, the main one being
whether enumerator values should be indexed. The consensus seems to be
that they should, although it does not follow from section 6.1.1.1.
For the time being I made the verifier ignore these, as LLVM does not do
this yet, and I wanted to get a clean run when verifying generated debug
info.
Another interesting case was the DW_TAG_imported_declaration. It was not
immediately clear to me whether this should go in or not, but currently
it is not indexed, and (unlike the enumerators) in does not seem to cause
problems for LLDB, so I've also ignored it.
Reviewers: JDevlieghere, aprantl, dblaikie
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D46583
llvm-svn: 331868
MOVNTPD/MOVNTPS should be WriteFStore
Standardized BDW/HSW/SKL/SKX WriteFStore/WriteVecStore - fixes some missed instregex patterns. (V)MASKMOVDQU was already using the default, its costs gets increased but is still nowhere near the real cost of that nasty instruction....
llvm-svn: 331864
It broke the Chromium build (see reply on the review).
> Generate DILabel metadata and call llvm.dbg.label after label
> statement to associate the metadata with the label.
>
> Differential Revision: https://reviews.llvm.org/D45045
>
> Patch by Hsiangkai Wang.
This doesn't revert the change to backend-unsupported-error.ll
that seems to correspond to an llvm-side change.
llvm-svn: 331861
The operator == used for exporting a function with a different
name in the DLL compared to the name in the import library
(which is useful for adding linker level aliases for function
in the import library) is a feature distinct and different from
the operator = used for exporting a function with a different
name (both in import library and DLL) than in the implementation
producing the DLL.
When creating an import library using dlltool, from a def file that
contains forwards (Func = OtherDll.Func), this shouldn't affect the
produced import library, which should still behave just as if it
was a normal exported function.
This clears a lot of confusion and subtle misunderstandings, and
avoids a parameter that was used to avoid creating weak aliases
when invoked from lld. (This parameter was added previously due to
the existing conflation of the two features.)
Differential Revision: https://reviews.llvm.org/D46245
llvm-svn: 331860
The operator == used for exporting a function with a different
name in the DLL compared to the name in the import library
(which is useful for adding linker level aliases for function
in the import library) is a feature distinct and different from
the operator = used for exporting a function with a different
name (both in import library and DLL) than in the implementation
producing the DLL.
When creating an import library using dlltool, from a def file that
contains forwards (Func = OtherDll.Func), this shouldn't affect the
produced import library, which should still behave just as if it
was a normal exported function.
This clears a lot of confusion and subtle misunderstandings, and
avoids a parameter that was used to avoid creating weak aliases
when invoked from lld. (This parameter was added previously due to
the existing conflation of the two features.)
Differential Revision: https://reviews.llvm.org/D46245
llvm-svn: 331859
This reverts commit SVN r331666.
It was afterwards pointed out in https://reviews.llvm.org/D46520
that #line directives lose information about what parts come from a
system header. That means the result of -E usually won't compile,
since Windows headers are typically full of warnings and
default-error warnings.
llvm-svn: 331858
Summary:
This patch makes `getLengthToMatchingParen` respect the `BreakBeforeClosingBrace`
ParenState for matching scope closers. In order to distinguish between paren states
introduced by real vs. fake parens, I've added the token opening the ParensState
to that struct.
Reviewers: djasper
Reviewed By: djasper
Subscribers: klimek, cfe-commits
Differential Revision: https://reviews.llvm.org/D46519
llvm-svn: 331857
Move all of the MIPS-only options into a new m_mips_Features_Group.
Nearly all other targets have most target-specific options grouped,
but MIPS does not.
The primary benefits are that the options will be listed together (and
thus identifiable as MIPS-specific even if they have no help string) in
the ClangCommandLineReference, and that Options.td is a bit more organized.
A secondary benefit is that a custom version of clang can more easily
hide/disable groups of options for unsupported targets.
Patch by Vince Del Vecchio
Differential Revision: https://reviews.llvm.org/D46450
llvm-svn: 331856
Summary:
Before this patch the two paths were doing very different things
- the apple path searched the .apple_names section, which contained
mangled names, as well as basenames of all functions. It returned any
name it found.
- the non-accelerated path looked in the "full name" index we built
ourselves, which contained mangled as well as demangled names of all
functions (but no basenames). Then however, if it did not find a match
it did an extra search in the basename index, with some special
handling for anonymous namespaces.
This aligns the two paths by changing the non-accelerated path to return
the same results as in the apple-tables one. In pratice, this means we
will search in both the "basename", "method" and "fullname" indexes (in
the manual indexes these are separate indexes. This means the function
will return some slightly inappropriate results (e.g. bar::baz::foo when
one asks for a "full name" foo), but this can be handled by additional
filtering, independently indexing method. I've also stopped inserting
demangled names into the "fullname" index, as that is inconsistent with
the apple path.
Reviewers: clayborg, JDevlieghere
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D46576
llvm-svn: 331855
Make these two test cases more generic for other architectures.
Please refer to '[DebugInfo] Convert intrinsic llvm.dbg.label to
MachineInstr.'
Patch by Hsiangkai Wang
llvm-svn: 331853
Summary:
MergedLoadStoreMotion::mergeStores is using some heuristics
to limit the amount of stores that it tries to sink (see
MagicCompileTimeControl in MergedLoadStoreMotion.cpp). The
heuristic involves counting the number of instructions in
one of the basic blocks that is part of the transformation.
We now ignore dbg intrinsics when counting instruction for
the MagicCompileTimeControl heuristic. This to make sure that
the amount of stores that are sunk doesn't depend on the amount
of debug information (if -g is used or not).
Reviewers: Gerolf, davide, majnemer
Reviewed By: davide
Subscribers: dberlin, bjope, aprantl, JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D46600
llvm-svn: 331852
Please refer to '[DebugInfo] Add DILabel metadata and intrinsic
llvm.dbg.label'. I have renamed the 'variables' attributes to
'retainedNodes' to include local variables and local labels for the
function.
Patch by Hsiangkai Wang.
llvm-svn: 331848
David Blaikie