Summary:
If a compare instruction is same or inverse of the compare in the
branch of the loop latch, then return a constant evolution node.
Currently scope of evaluation is limited to SCEV computation for
PHI nodes.
This shall facilitate computations of loop exit counts in cases
where compare appears in the evolution chain of induction variables.
Will fix PR 34538
Reviewers: sanjoy, hfinkel, junryoungju
Reviewed By: junryoungju
Subscribers: javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D38494
llvm-svn: 316054
Summary:
Add LLVM_FORCE_ENABLE_DUMP cmake option, and use it along with
LLVM_ENABLE_ASSERTIONS to set LLVM_ENABLE_DUMP.
Remove NDEBUG and only use LLVM_ENABLE_DUMP to enable dump methods.
Move definition of LLVM_ENABLE_DUMP from config.h to llvm-config.h so
it'll be picked up by public headers.
Differential Revision: https://reviews.llvm.org/D38406
llvm-svn: 315590
When LSR processes code like
int accumulator = 0;
for (int i = 0; i < N; i++) {
accummulator += i;
use((double) accummulator);
}
It may decide to replace integer `accumulator` with a double Shadow IV to get rid
of casts. The problem with that is that the `accumulator`'s value may overflow.
Starting from this moment, the behavior of integer and double accumulators
will differ.
This patch strenghtens up the conditions of Shadow IV mechanism applicability.
We only allow it for IVs that are proved to be `AddRec`s with `nsw`/`nuw` flag.
Differential Revision: https://reviews.llvm.org/D37209
llvm-svn: 311986
isLegalAddressingMode() has recently gained the extra optional Instruction*
parameter, and therefore it can now do the job that previously only
isFoldableMemAccess() could do.
The SystemZ implementation of isLegalAddressingMode() has gained the
functionality of checking for offsets, which used to be done with
isFoldableMemAccess().
The isFoldableMemAccess() hook has been removed everywhere.
Review: Quentin Colombet, Ulrich Weigand
https://reviews.llvm.org/D35933
llvm-svn: 310463
In the recursive call to isAMCompletelyFolded(), the passed offset should be
the sum of F.BaseOffset and Fixup.Offset.
Review: Quentin Colombet.
llvm-svn: 310462
The root cause of reverting was fixed - PR33514.
Summary:
The patch makes instruction count the highest priority for
LSR solution for X86 (previously registers had highest priority).
Reviewers: qcolombet
Differential Revision: http://reviews.llvm.org/D30562
From: Evgeny Stupachenko <evstupac@gmail.com>
<evgeny.v.stupachenko@intel.com>
llvm-svn: 310289
Summary:
The bug was uncovered after fix of PR23384 (part 3 of 3).
The patch restricts pointer multiplication in SCEV computaion for ICmpZero.
Reviewers: qcolombet
Differential Revision: http://reviews.llvm.org/D36170
From: Evgeny Stupachenko <evstupac@gmail.com>
<evgeny.v.stupachenko@intel.com>
llvm-svn: 310092
Summary:
Since r293359, most dump() function are only defined when
`!defined(NDEBUG) || defined(LLVM_ENABLE_DUMP)` holds. print() functions
only used by dump() functions are now unused in release builds,
generating lots of warnings. This patch only defines some print()
functions if they are used.
Reviewers: MatzeB
Reviewed By: MatzeB
Subscribers: arsenm, mzolotukhin, nhaehnle, llvm-commits
Differential Revision: https://reviews.llvm.org/D35949
llvm-svn: 309553
This patch makes LSR generate better code for SystemZ in the cases of memory
intrinsics, Load->Store pairs or comparison of immediate with memory.
In order to achieve this, the following common code changes were made:
* New TTI hook: LSRWithInstrQueries(), which defaults to false. Controls if
LSR should do instruction-based addressing evaluations by calling
isLegalAddressingMode() with the Instruction pointers.
* In LoopStrengthReduce: handle address operands of memset, memmove and memcpy
as address uses, and call isFoldableMemAccessOffset() for any LSRUse::Address,
not just loads or stores.
SystemZ changes:
* isLSRCostLess() implemented with Insns first, and without ImmCost.
* New function supportedAddressingMode() that is a helper for TTI methods
looking at Instructions passed via pointers.
Review: Ulrich Weigand, Quentin Colombet
https://reviews.llvm.org/D35262https://reviews.llvm.org/D35049
llvm-svn: 308729
Going through the Constant methods requires redetermining that the Constant is a ConstantInt and then calling isZero/isOne/isMinusOne.
llvm-svn: 307292
When the formulae search space is huge, LSR uses a series of heuristic to keep
pruning the search space until the number of possible solutions are within
certain limit.
The big hammer of the series of heuristics is NarrowSearchSpaceByPickingWinnerRegs,
which picks the register which is used by the most LSRUses and deletes the other
formulae which don't use the register. This is a effective way to prune the search
space, but quite often not a good way to keep the best solution. We saw cases before
that the heuristic pruned the best formula candidate out of search space.
To relieve the problem, we introduce a new heuristic called
NarrowSearchSpaceByFilterFormulaWithSameScaledReg. The basic idea is in order to
reduce the search space while keeping the best formula, we want to keep as many
formulae with different Scale and ScaledReg as possible. That is because the central
idea of LSR is to choose a group of loop induction variables and use those induction
variables to represent LSRUses. An induction variable candidate is often represented
by the Scale and ScaledReg in a formula. If we have more formulae with different
ScaledReg and Scale to choose, we have better opportunity to find the best solution.
That is why we believe pruning search space by only keeping the best formula with the
same Scale and ScaledReg should be more effective than PickingWinnerReg. And we use
two criteria to choose the best formula with the same Scale and ScaledReg. The first
criteria is to select the formula using less non shared registers, and the second
criteria is to select the formula with less cost got from RateFormula. The patch
implements the heuristic before NarrowSearchSpaceByPickingWinnerRegs, which is the
last resort.
Testing shows we get 1.8% and 2% on two internal benchmarks on x86. llvm nightly
testsuite performance is neutral. We also tried lsr-exp-narrow and it didn't help
on the two improved internal cases we saw.
Differential Revision: https://reviews.llvm.org/D34583
llvm-svn: 307269
This seems to be interacting badly with ASan somehow, causing false reports of
heap-buffer overflows: PR33514.
> Summary:
> The patch makes instruction count the highest priority for
> LSR solution for X86 (previously registers had highest priority).
>
> Reviewers: qcolombet
>
> Differential Revision: http://reviews.llvm.org/D30562
>
> From: Evgeny Stupachenko <evstupac@gmail.com>
llvm-svn: 305720
Summary:
The patch makes instruction count the highest priority for
LSR solution for X86 (previously registers had highest priority).
Reviewers: qcolombet
Differential Revision: http://reviews.llvm.org/D30562
From: Evgeny Stupachenko <evstupac@gmail.com>
llvm-svn: 304824
Summary:
The patch guard all instruction cost calculations with InsnCosts (-lsr-insns-cost) option.
Currently even if the option set to false we calculate and print (in debug mode) instruction costs.
Reviewers: qcolombet
Differential Revision: http://reviews.llvm.org/D33914
From: Evgeny Stupachenko <evstupac@gmail.com>
llvm-svn: 304746
The testcase in PR33077 generates a LSR Use Formula with two SCEVAddRecExprs for the same
loop. Such uncommon formula will become non-canonical after GenerateTruncates adds sign
extension to the ScaledReg of the Formula, and it will break the assertion that every
Formula to be inserted is canonical.
The fix is to call canonicalize for the raw Formula generated by GenerateTruncates
before inserting it.
llvm-svn: 303361
Commits were:
"Use WeakVH instead of WeakTrackingVH in AliasSetTracker's UnkownInsts"
"Add a new WeakVH value handle; NFC"
"Rename WeakVH to WeakTrackingVH; NFC"
The changes assumed pointers are 8 byte aligned on all architectures.
llvm-svn: 301429
Summary:
I plan to use WeakVH to mean "nulls itself out on deletion, but does
not track RAUW" in a subsequent commit.
Reviewers: dblaikie, davide
Reviewed By: davide
Subscribers: arsenm, mehdi_amini, mcrosier, mzolotukhin, jfb, llvm-commits, nhaehnle
Differential Revision: https://reviews.llvm.org/D32266
llvm-svn: 301424
It is cleaner to have a callback based system where the logic of
whether an add recurrence is normalized or not lives on IVUsers.
This is one step in a multi-step cleanup.
llvm-svn: 300330
After rL294814, LSR formula can have multiple SCEVAddRecExprs inside of its BaseRegs.
Previous canonicalization will swap the first SCEVAddRecExpr in BaseRegs with ScaledReg.
But now we want to swap the SCEVAddRecExpr Reg related with current loop with ScaledReg.
Otherwise, we may generate code like this: RegA + lsr.iv + RegB, where loop invariant
parts RegA and RegB are not grouped together and cannot be promoted outside of loop.
With this patch, it will ensure lsr.iv to be generated later in the expr:
RegA + RegB + lsr.iv, so that RegA + RegB can be promoted outside of loop.
Differential Revision: https://reviews.llvm.org/D26781
llvm-svn: 295884
The new method introduced under "-lsr-exp-narrow" option (currenlty set to true).
Summary:
The method is based on registers number mathematical expectation and should be
generally closer to optimal solution.
Please see details in comments to
"LSRInstance::NarrowSearchSpaceByDeletingCostlyFormulas()" function
(in lib/Transforms/Scalar/LoopStrengthReduce.cpp).
Reviewers: qcolombet
Differential Revision: http://reviews.llvm.org/D29862
From: Evgeny Stupachenko <evstupac@gmail.com>
llvm-svn: 295704
In rL294814, we allow formula with SCEVAddRecExpr type of Reg from loops
other than current loop. This is good for the case when induction variable
of outerloop being used in expr in innerloop. But it is very bad to allow
such Reg from sibling loop because we may need to add lsr.iv in other sibling
loops when scev expanding those SCEVAddRecExpr type exprs. For the testcase
below, one loop can be inserted with a bunch of lsr.iv because of LSR for
other loops.
// The induction variable j from a loop in the middle will have initial
// value generated from previous sibling loop and exit value used by its
// next sibling loop.
void goo(long i, long j);
long cond;
void foo(long N) {
long i = 0;
long j = 0;
i = 0; do { goo(i, j); i++; j++; } while (cond);
i = 0; do { goo(i, j); i++; j++; } while (cond);
i = 0; do { goo(i, j); i++; j++; } while (cond);
i = 0; do { goo(i, j); i++; j++; } while (cond);
i = 0; do { goo(i, j); i++; j++; } while (cond);
i = 0; do { goo(i, j); i++; j++; } while (cond);
}
The fix is to only allow formula with SCEVAddRecExpr type of Reg from current
loop or its parents.
Differential Revision: https://reviews.llvm.org/D30021
llvm-svn: 295378
Summary:
Function isCompatibleIVType is already used as a guard before the call to
SE.getMinusSCEV(OperExpr, PrevExpr);
in LSRInstance::ChainInstruction. getMinusSCEV requires the expressions
to be of the same type, so we now consider two pointers with different
address spaces to be incompatible, since it is possible that the pointers
in fact have different sizes.
Reviewers: qcolombet, eli.friedman
Reviewed By: qcolombet
Subscribers: nhaehnle, Ka-Ka, llvm-commits, mzolotukhin
Differential Revision: https://reviews.llvm.org/D29885
llvm-svn: 295033
Summary:
The patch adds instructions number generated by a solution
to LSR cost under "-lsr-insns-cost" option.
Reviewers: qcolombet, hfinkel
Differential Revision: http://reviews.llvm.org/D28307
From: Evgeny Stupachenko <evstupac@gmail.com>
llvm-svn: 294821
The recommit includes some changes of testcases. No functional change to the patch.
In RateRegister of existing LSR, if a formula contains a Reg which is a SCEVAddRecExpr,
and this SCEVAddRecExpr's loop is an outerloop, the formula will be marked as Loser
and dropped.
Suppose we have an IR that %for.body is outerloop and %for.body2 is innerloop. LSR only
handle inner loop now so only %for.body2 will be handled.
Using the logic above, formula like
reg(%array) + reg({1,+, %size}<%for.body>) + 1*reg({0,+,1}<%for.body2>) will be dropped
no matter what because reg({1,+, %size}<%for.body>) is a SCEVAddRecExpr type reg related
with outerloop. Only formula like
reg(%array) + 1*reg({{1,+, %size}<%for.body>,+,1}<nuw><nsw><%for.body2>) will be kept
because the SCEVAddRecExpr related with outerloop is folded into the initial value of the
SCEVAddRecExpr related with current loop.
But in some cases, we do need to share the basic induction variable
reg{0 ,+, 1}<%for.body2> among LSR Uses to reduce the final total number of induction
variables used by LSR, so we don't want to drop the formula like
reg(%array) + reg({1,+, %size}<%for.body>) + 1*reg({0,+,1}<%for.body2>) unconditionally.
From the existing comment, it tries to avoid considering multiple level loops at the same time.
However, existing LSR only handles innermost loop, so for any SCEVAddRecExpr with a loop other
than current loop, it is an invariant and will be simple to handle, and the formula doesn't have
to be dropped.
Differential Revision: https://reviews.llvm.org/D26429
llvm-svn: 294814
For targets with different addressing modes in each address space,
if this is dropped querying isLegalAddressingMode later with this
will give a nonsense result, breaking the isLegalUse assertions.
This is a candidate for the 4.0 release branch.
llvm-svn: 293542
We had various variants of defining dump() functions in LLVM. Normalize
them (this should just consistently implement the things discussed in
http://lists.llvm.org/pipermail/cfe-dev/2014-January/034323.html
For reference:
- Public headers should just declare the dump() method but not use
LLVM_DUMP_METHOD or #if !defined(NDEBUG) || defined(LLVM_ENABLE_DUMP)
- The definition of a dump method should look like this:
#if !defined(NDEBUG) || defined(LLVM_ENABLE_DUMP)
LLVM_DUMP_METHOD void MyClass::dump() {
// print stuff to dbgs()...
}
#endif
llvm-svn: 293359
In r292621, the recommit fixes a bug related with live interval update
after the partial redundent copy is moved.
This recommit solves an additional bug related to the lack of update of
subranges.
The original patch is to solve the performance problem described in
PR27827. Register coalescing sometimes cannot remove a copy because of
interference. But if we can find a reverse copy in one of the predecessor
block of the copy, the copy is partially redundent and we may remove the
copy partially by moving it to the predecessor block without the
reverse copy.
Differential Revision: https://reviews.llvm.org/D28585
Re-apply r292621
Revert "Revert rL292621. Caused some internal build bot failures in apple."
This reverts commit r292984.
Original patch: Wei Mi <wmi@google.com>
Subrange fix: Mostly Matthias Braun <matze@braunis.de>
llvm-svn: 293353
the latter to the Transforms library.
While the loop PM uses an analysis to form the IR units, the current
plan is to have the PM itself establish and enforce both loop simplified
form and LCSSA. This would be a layering violation in the analysis
library.
Fundamentally, the idea behind the loop PM is to *transform* loops in
addition to running passes over them, so it really seemed like the most
natural place to sink this was into the transforms library.
We can't just move *everything* because we also have loop analyses that
rely on a subset of the invariants. So this patch splits the the loop
infrastructure into the analysis management that has to be part of the
analysis library, and the transform-aware pass manager.
This also required splitting the loop analyses' printer passes out to
the transforms library, which makes sense to me as running these will
transform the code into LCSSA in theory.
I haven't split the unittest though because testing one component
without the other seems nearly intractable.
Differential Revision: https://reviews.llvm.org/D28452
llvm-svn: 291662
arguments much like the CGSCC pass manager.
This is a major redesign following the pattern establish for the CGSCC layer to
support updates to the set of loops during the traversal of the loop nest and
to support invalidation of analyses.
An additional significant burden in the loop PM is that so many passes require
access to a large number of function analyses. Manually ensuring these are
cached, available, and preserved has been a long-standing burden in LLVM even
with the help of the automatic scheduling in the old pass manager. And it made
the new pass manager extremely unweildy. With this design, we can package the
common analyses up while in a function pass and make them immediately available
to all the loop passes. While in some cases this is unnecessary, I think the
simplicity afforded is worth it.
This does not (yet) address loop simplified form or LCSSA form, but those are
the next things on my radar and I have a clear plan for them.
While the patch is very large, most of it is either mechanically updating loop
passes to the new API or the new testing for the loop PM. The code for it is
reasonably compact.
I have not yet updated all of the loop passes to correctly leverage the update
mechanisms demonstrated in the unittests. I'll do that in follow-up patches
along with improved FileCheck tests for those passes that ensure things work in
more realistic scenarios. In many cases, there isn't much we can do with these
until the loop simplified form and LCSSA form are in place.
Differential Revision: https://reviews.llvm.org/D28292
llvm-svn: 291651
Summary:
Fix a case when first register in a search has maximum
RegUses.getUsedByIndices(Reg).count()
Reviewers: qcolombet
Differential Revision: http://reviews.llvm.org/D26877
From: Evgeny Stupachenko <evstupac@gmail.com>
llvm-svn: 288278
In RateRegister of existing LSR, if a formula contains a Reg which is a SCEVAddRecExpr,
and this SCEVAddRecExpr's loop is an outerloop, the formula will be marked as Loser
and dropped.
Suppose we have an IR that %for.body is outerloop and %for.body2 is innerloop. LSR only
handle inner loop now so only %for.body2 will be handled.
Using the logic above, formula like
reg(%array) + reg({1,+, %size}<%for.body>) + 1*reg({0,+,1}<%for.body2>) will be dropped
no matter what because reg({1,+, %size}<%for.body>) is a SCEVAddRecExpr type reg related
with outerloop. Only formula like
reg(%array) + 1*reg({{1,+, %size}<%for.body>,+,1}<nuw><nsw><%for.body2>) will be kept
because the SCEVAddRecExpr related with outerloop is folded into the initial value of the
SCEVAddRecExpr related with current loop.
But in some cases, we do need to share the basic induction variable
reg{0 ,+, 1}<%for.body2> among LSR Uses to reduce the final total number of induction
variables used by LSR, so we don't want to drop the formula like
reg(%array) + reg({1,+, %size}<%for.body>) + 1*reg({0,+,1}<%for.body2>) unconditionally.
From the existing comment, it tries to avoid considering multiple level loops at the same time.
However, existing LSR only handles innermost loop, so for any SCEVAddRecExpr with a loop other
than current loop, it is an invariant and will be simple to handle, and the formula doesn't have
to be dropped.
Differential Revision: https://reviews.llvm.org/D26429
llvm-svn: 286999
Scalar Evolution asserts when not all the operands of an Add Recurrence
Expression are loop invariants. Loop Strength Reduction should only
create affine Add Recurrences, so that both the start and the step of
the expression are loop invariants.
Differential Revision: https://reviews.llvm.org/D26185
llvm-svn: 286347
Summary:
SmallSetVector uses DenseSet, but that means we need to reserve some
values for the empty and tombstone keys.
It seems to me we should have a general way to let us store full-range
ints inside of DenseSets, and furthermore that we probably shouldn't
silently let you add ints into DenseSets without explicitly promising
that they're in range. But that's a battle for another day; for now,
just fix this code, since we currently do something Very Bad when
compiling ffmpeg.
Fixes PR30914.
Reviewers: jeremyhu
Subscribers: llvm-commits, mzolotukhin
Differential Revision: https://reviews.llvm.org/D26323
llvm-svn: 286038
Refactored so that a LSRUse owns its fixups, as oppsed to letting the
LSRInstance own them. This makes it easier to rate formulas for
LSRUses, since the fixups are available directly. The Offsets vector
has been removed since it was no longer necessary.
New target hook isFoldableMemAccessOffset(), which is used during formula
rating.
For SystemZ, this is useful to express that loads and stores with
float or vector types with a big/negative offset should be avoided in
loops. Without this, LSR will generate a lot of negative offsets that
would require extra instructions for loading the address.
Updated tests:
test/CodeGen/SystemZ/loop-01.ll
Reviewed by: Quentin Colombet and Ulrich Weigand.
https://reviews.llvm.org/D19152
llvm-svn: 278927
If a loop is not rotated (for example when optimizing for size), the latch is not the backedge. If we promote an expression to post-inc form, we not only increase register pressure and add a COPY for that IV expression but for all IVs!
Motivating testcase:
void f(float *a, float *b, float *c, int n) {
while (n-- > 0)
*c++ = *a++ + *b++;
}
It's imperative that the pointer increments be located in the latch block and not the header block; if not, we cannot use post-increment loads and stores and we have to keep both the post-inc and pre-inc values around until the end of the latch which bloats register usage.
llvm-svn: 278658
Sanjoy Das