Fix PR21802 by correcting the destruction order of
`ClangExpressionParser` and `IRExecutionUnit` in `ClangFunction`. The
former has hooks into the latter -- i.e., `clang::CGDebugInfo` points at
the `LLVMContext` -- so it needs to be torn down first.
This was exposed by r223802 in LLVM, which started doing work in the
`CGDebugInfo` teardown.
llvm-svn: 223916
Function pointers had a summary generated for them bypassing formatters, directly as part of the ValueObject subsystem
This patch transitions that code into a hardcoded summary
llvm-svn: 223906
The issue with Thumb IT (if/then) instructions is the IT instruction preceeds up to four instructions that are made conditional. If a breakpoint is placed on one of the conditional instructions, the instruction either needs to match the thumb opcode size (2 or 4 bytes) or a BKPT instruction needs to be used as these are always unconditional (even in a IT instruction). If BKPT instructions are used, then we might end up stopping on an instruction that won't get executed. So if we do stop at a BKPT instruction, we need to continue if the condition is not true.
When using the BKPT isntructions are easy in that you don't need to detect the size of the breakpoint that needs to be used when setting a breakpoint even in a thumb IT instruction. The bad part is you will now always stop at the opcode location and let LLDB determine if it should auto-continue. If the BKPT instruction is used, the BKPT that is used for ARM code should be something that also triggers the BKPT instruction in Thumb in case you set a breakpoint in the middle of code and the code is actually Thumb code. A value of 0xE120BE70 will work since the lower 16 bits being 0xBE70 happens to be a Thumb BKPT instruction.
The alternative is to use trap or illegal instructions that the kernel will translate into breakpoint hits. On Mac this was 0xE7FFDEFE for ARM and 0xDEFE for Thumb. The darwin kernel currently doesn't recognize any 32 bit Thumb instruction as a instruction that will get turned into a breakpoint exception (EXC_BREAKPOINT), so we had to use the BKPT instruction on Mac. The linux kernel recognizes a 16 and a 32 bit instruction as valid thumb breakpoint opcodes. The benefit of using 16 or 32 bit instructions is you don't stop on opcodes in a IT block when the condition doesn't match.
To further complicate things, single stepping on ARM is often implemented by modifying the BCR/BVR registers and setting the processor to stop when the PC is not equal to the current value. This means single stepping is another way the ARM target can stop on instructions that won't get executed.
This patch does the following:
1 - Fix the internal debugserver for Apple to use the BKPT instruction for ARM and Thumb
2 - Fix LLDB to catch when we stop in the middle of a Thumb IT instruction and continue if we stop at an instruction that won't execute
3 - Fixes this in a way that will work for any target on any platform as long as it is ARM/Thumb
4 - Adds a patch for ignoring conditions that don't match when in ARM mode (see below)
This patch also provides the code that implements the same thing for ARM instructions, though it is disabled for now. The ARM patch will check the condition of the instruction in ARM mode and continue if the condition isn't true (and therefore the instruction would not be executed). Again, this is not enable, but the code for it has been added.
<rdar://problem/19145455>
llvm-svn: 223851
track of the checksum of the object so we can
track if it is modified. This fixes a testcase
(test/expression_command/issue_11588) on OS X.
Patch by Enrico Granata.
llvm-svn: 223830
- adds a new flag to mark ValueObjects as "synthetic children generated"
- vends new Create functions as part of the SyntheticChildrenFrontEnd that set the flag automatically
- moves synthetic child providers over to using these new functions
No visible feature change, but preparatory work for feature change
llvm-svn: 223819
Such a persisted version is equivalent to evaluating the value via the expression evaluator, and holding on to the $n result of the expression, except this API can be used on SBValues that do not obviously come from an expression (e.g. are the result of a memory lookup)
Expose this via SBValue::Persist() in our public API layer, and ValueObject::Persist() in the lldb_private layer
Includes testcase
Fixes rdar://19136664
llvm-svn: 223711
section for x86_64 and i386 targets on Darwin systems. Currently only the
compact unwind encoding for normal frame-using functions is supported but it
will be easy handle frameless functions when I have a bit more free time to
test it. The LSDA and personality routines for functions are also retrieved
correctly for functions from the compact unwind section.
This new code is very fresh -- it passes the lldb testsuite and I've done
by-hand inspection of many functions and am getting correct behavior for all
of them. There may need to be some bug fixing over the next couple weeks as
I exercise and test it further. But I think it's fine right now so I'm
committing it.
<rdar://problem/13220837>
llvm-svn: 223625
in the "dummy-target". The dummy target breakpoints prime all future
targets. Breakpoints set before any target is created (e.g. breakpoints
in ~/.lldbinit) automatically get set in the dummy target. You can also
list, add & delete breakpoints from the dummy target using the "-D" flag,
which is supported by most of the breakpoint commands.
This removes a long-standing wart in lldb...
<rdar://problem/10881487>
llvm-svn: 223565
encounter clang::ExternalASTSources that are not instances
of ClangExternalASTSourceCommon. We used to blithely
assume that all are, and so we could use static_cast<>.
That's no longer the case, so we have to have these AST
sources register themselves.
llvm-svn: 223560
support to LLDB. It includes the following:
- Changed DeclVendor to TypeVendor.
- Made the ObjCLanguageRuntime provide a DeclVendor
rather than a TypeVendor.
- Changed the consumers of TypeVendors to use
DeclVendors instead.
- Provided a few convenience functions on
ClangASTContext to make that easier.
llvm-svn: 223433
like tgmath.h and stdarg.h into the LLDB installation,
and then finding them through the Host infrastructure.
Also add a script to actually do this on Mac OS X.
llvm-svn: 223430
% lldb /bin/nonono
(lldb) target create "/bin/nonono"
error: unable to find executable for '/usr/bin/nonono'
<deadlock>
The problem was the initial commands 'target create "/bin/nonono"' were put into a pipe and the command interpreter was being run with:
void
CommandInterpreter::RunCommandInterpreter(bool auto_handle_events,
bool spawn_thread,
CommandInterpreterRunOptions &options)
{
// Always re-create the command intepreter when we run it in case
// any file handles have changed.
bool force_create = true;
m_debugger.PushIOHandler(GetIOHandler(force_create, &options));
m_stopped_for_crash = false;
if (auto_handle_events)
m_debugger.StartEventHandlerThread();
if (spawn_thread)
{
m_debugger.StartIOHandlerThread();
}
else
{
m_debugger.ExecuteIOHanders();
if (auto_handle_events)
m_debugger.StopEventHandlerThread();
}
}
If "auto_handle_events" was set to true and "spawn_thread" was false, we would execute:
m_debugger.StartEventHandlerThread();
m_debugger.ExecuteIOHanders();
m_debugger.StopEventHandlerThread();
The problem was there was no synchonization in Debugger::StartEventHandlerThread() to ensure the event handler was listening to events and the the call to "m_debugger.StopEventHandlerThread()" would do:
void
Debugger::StopEventHandlerThread()
{
if (m_event_handler_thread.IsJoinable())
{
GetCommandInterpreter().BroadcastEvent(CommandInterpreter::eBroadcastBitQuitCommandReceived);
m_event_handler_thread.Join(nullptr);
}
}
The problem was that the event thread might not be listening for the CommandInterpreter::eBroadcastBitQuitCommandReceived event yet.
The solution is to make sure the Debugger::DefaultEventHandler() is listening to events before we return from Debugger::StartEventHandlerThread(). Once we have this synchonization we remove the race condition.
This fixes radar:
<rdar://problem/19041192>
llvm-svn: 223083
In the initialization list of IOHandlerConfirm, *this is basically casting
IOHandlerConfirm to its base IOHandlerDelegate and passing it to constructor of
IOHandlerEditline which uses it and crashes as constructor of IOHandlerDelegate
is still not called. Re-ordering the base classes makes sure that constructor of
IOHandlerDelegate runs first.
It would be good to have a test case for this case too.
llvm-svn: 222816
(e.g. breakpoints, stop-hooks) before we have any targets - for instance in
your ~/.lldbinit file. These will then get copied over to any new targets
that get created. So far, you can only make stop-hooks.
Breakpoints will have to learn to move themselves from target to target for
us to get them from no-target to new-target.
We should also make a command & SB API way to prime this ur-target.
llvm-svn: 222600
retrieves the personality routine addr and the
LSDA addr. Don't bother checking with the
"non-call site" unwind plan - this kind of
information is only going to come from the
call site unwind plan.
llvm-svn: 222226
deadlocking when we have the base Unwind class and the HistoryUnwind
subclass both trying to acquire the lock on the same thread to clear
their respective ivar state.
<rdar://problem/18986350>
llvm-svn: 222221
eh_frame data. These two pieces of information are used in the
process of exception handler unwinding on SysV ABI systems.
This patch reads the data from the eh_frame section
(DWARFCallFrameInfo.cpp), allows for it to be saved & read out
of a given UnwindPlan (UnwindPlan.h, UnwindPlan.cpp) - as well
as printing the information in the UnwindPlan::Dump method - and
adds methods to the FuncUnwinders object so that higher levels
can query if a given function has an LSDA / personality routine
defined.
It's only lightly tested, but seems to be working correctly as long
as your have this information in eh_frame. Does not address getting
this information from compact unwind yet on Darwin systems.
<rdar://problem/18742797>
llvm-svn: 222214
Previously using HostThread::GetNativeThread() required an ugly
cast to most-derived type. This solves the issue by simply returning
the derived type directly.
llvm-svn: 222185
Fixed include:
- Change Platform::ResolveExecutable(...) to take a ModuleSpec instead of a FileSpec + ArchSpec to help resolve executables correctly when we have just a path + UUID (no arch).
- Add the ability to set the listener in SBLaunchInfo and SBAttachInfo in case you don't want to use the debugger as the default listener.
- Modified all places that use the SBLaunchInfo/SBAttachInfo and the internal ProcessLaunchInfo/ProcessAttachInfo to not take a listener as a parameter since it is in the launch/attach info now
- Load a module's sections by default when removing a module from a target. Since we create JIT modules for expressions and helper functions, we could end up with stale data in the section load list if a module was removed from the target as the section load list would still have entries for the unloaded module. Target now has the following functions to help unload all sections a single or multiple modules:
size_t
Target::UnloadModuleSections (const ModuleList &module_list);
size_t
Target::UnloadModuleSections (const lldb::ModuleSP &module_sp);
llvm-svn: 222167
Improvements include:
* Use of libedit's wide character support, which is imperfect but a distinct improvement over ASCII-only
* Fallback for ASCII editing path
* Support for a "faint" prompt clearly distinguished from input
* Breaking lines and insert new lines in the middle of a batch by simply pressing return
* Joining lines with forward and backward character deletion
* Detection of paste to suppress automatic formatting and statement completion tests
* Correctly reformatting when lines grow or shrink to occupy different numbers of rows
* Saving multi-line history, and correctly preserving the "tip" of history during editing
* Displaying visible ^C and ^D indications when interrupting input or sending EOF
* Fledgling VI support for multi-line editing
* General correctness and reliability improvements
llvm-svn: 222163
This creates a TargetThreadWindows class and updates the thread
list of the Process with the main thread. Additionally, we
fill out a few more overrides of Process base class methods. We
do not yet update the thread list as threads are created and/or
destroyed, and we do not yet propagate stop reasons to threads as
their states change.
llvm-svn: 222148
relative paths, like:
/whatever/llvm/lib/Sema/../../include/llvm/Sema/
That causes problems with our type uniquing, since we use the declaration file
and line as one component of the uniquing, and different ways of getting to the
same file will have different directory spellings, though they are functionally
equivalent. We end up with two copies of the exact same type because of this,
and that makes the expression parser give "duplicate type" errors.
I added a method to resolve paths with ../ in them and used that in the FileSpec::Equals,
for comparing Declarations and for doing Breakpoint compares as well, since they also
suffer from this if you specify breakpoints by full path (since nobody knows what
../'s to insert...)
<rdar://problem/18765814>
llvm-svn: 222075
RegisterContextLLDB. I have core files of half a dozen tricky
unwind situations on x86/arm and they're all working pretty much
correctly at this point, but we'll need to keep an eye out for
unwinder regressions for a little while; it's tricky to get these
heuristics completely correct in all unwind situations.
<rdar://problem/18937193>
llvm-svn: 221866
Summary:
PowerPC handles the stack chain with the current stack pointer being a pointer
to the backchain (CFA). LLDB currently has no way of handling this, so this
adds a "CFA is dereferenced from a register" type.
Discussed with Jason Molenda, who also provided the initial patch for this.
Reviewers: jasonmolenda
Reviewed By: jasonmolenda
Subscribers: emaste, lldb-commits
Differential Revision: http://reviews.llvm.org/D6182
llvm-svn: 221788
Enrico Granata