Removed a "done" TODO comment.
Moved some helper methods to the top of the unit test.
Removed some commented out code I was considering implementing
before I came up with a better overall approach.
llvm-svn: 209561
Added test to check that each thread reported by $q{f,s}ThreadInfo
can be switched to by $Hg, verified by a follow-up $qC.
Modified test exe to accept "thread:new" to create a new thread
that runs and sleeps for 5 seconds.
@llgs_test/@debugserver_test now buffer output.
llgs and debugserver gdbremote protocol tests now collect $O notification
output into the context returned from expect_lldb_gdbserver_replay.
context["O_count"] is an integer indicating the number of $O packets
collected during the replay, and context["O_content"] contains the
accumulated hex-decoded text output by the inferior (stdout and stderr).
Modified the $O check test to check the accumulated output rather than
a direct $O packet.
llvm-svn: 209560
Each register returned by $qRegisterInfo is tested that it's
$p register read returns a representation that is the correct byte size
as indicated by $qRegisterInfo.
Currently enabled for debugserver, disabled for llgs.
The llgs branch will use this to verify $p implementation.
llvm-svn: 209452
Added helper methods:
prep_debug_monitor_and_inferior(): properly handles
the two cases of running the stub against an inferior process
launched by the stub, and one attached to by the stub. See
docs for function: simplifies test creation for tests that want
to test the same operations against a launched and attached inferior.
Added the q{f,s}ThreadInfo and $qC response comparison test (verifies
they both return the same thing) when the process is attached rather
than launched by the stub.
Modified the previous two tests added to make use of the new
prep_debug_monitor_and_inferior() facility.
llvm-svn: 209318
The First test verifies that qThreadInfo queries work for stub-launched processes.
The second test verifies that $qC after stub-launched inferior returns the same
thread as the qThreadInfo queries.
llvm-svn: 209314
The multi request-response test infrastructure support was adding
the optional request suffix iteration index as decimal but it needed
to be hex per spec. This change fixes that.
llvm-svn: 209234
Added support for gdb remote protocol capture/playback where there is a query/multiple-response
pattern. The new playback entry supports:
- a general query command (key: next_query or query)
- an optional first-query command if that differs from the subsequent queries (key: first_query)
- an end regex for matching anything that would signify that the query/multi-response
iteration has come to an end. An assumption is that the end regex is not a content
package we care about aside from ending the iteration. (key: end_regex)
- an optional 0-based index appended to the end of the query command
(key: append_iteration_suffix), default: False.
- a key used to collect responses from the query. Any response from the gdb remote
that doesn't match the end-of-iteration regex is captured in the playback context
dictionary using the key specified. That key will be an array, where each array
entry is one of the responses from the query/multi-response iteration. (key: save_key).
- a runaway response value, defaulting to 10k, where if this many responses is captured,
assume the ending condition regex is invalid, or the debug monitor is doing something
goofy that is going to blow out memory or time. (key: runaway_response_count, default: 10000)
See the lldbgdbserverutils.MultiResponseGdbRemoteEntry class for details.
A MultiResponseGdbRemoteEntry is added by adding an element to the GdbRemoteTestSequence
(via GdbRemoteTestSequence.add_log_lines), using a dictionary, where the "type" key
is set to "multi_response", and the rest of the keys in the dictionary entry are
set to the keys documented for MultiResponseGdbRemoteEntry.
Added helper functions to add the required entry to grab all qRegisterInfo responses.
Added another helper to parse the qRegisterInfo response packets into an array of
dictionaries, where each key:value in the dictionary comes from the register info
response packet.
Added a test to verify that a generic register exists for the program counter,
frame pointer, stack pointer and cpu flags across all register info responses.
Added a test to verify that at least one register set exists across all register
info responses.
llvm-svn: 209170
Need to spend a little more time with suppressing the debugserver 64-to-32 bit warnings.
Will re-submit after I get the warnings properly suppressed.
llvm-svn: 209151
Checks that at at least qRegisterInfo0 responds with a valid
register info reply packet. The packet is parsed and validates
that all keys come from the documented set of valid keys. It
then validates that a minimum set of expected keys
are present in the returned packet.
This test is set to pass on debugserver and fail on llgs TOT.
llvm-svn: 209109
debugserver now returns $X09 as the immediate response to
a $k kill process request rather than $W09.
ProcessGDBRemote now properly handles X as indication of
a process exit state.
The @debugserver_test and @lldb_test for $k now properly expects
an X notification (signal-caused exit) after killing a just-attached
inferior that was still in the stopped state.
llvm-svn: 209108
Checks that the pid reported by $qProcessInfo matches the pid that was
launched as the attach test subject.
test exe now supports "sleep:{sleep_seconds}" command line argument.
llvm-svn: 208782
the SystemRuntime to check if a thread will have any problems
performing an inferior function call so the driver can skip
making that function call on that thread. Often the function
call can be executed on another thread instead.
<rdar://problem/16777874>
llvm-svn: 208732
The clean line is failing under Ubuntu 12.04/gcc. It cleans fine
without it on MacOSX. It doesn't clean right on Linux but at least
now it doesn't fail the test.
llvm-svn: 208713
$qC from debugserver now returns the current thread's thread-id (and, like $?, will set a current thread if one is not already selected). Previously it was returning the current process id.
lldb will now query $qProcessInfo to retrieve the process id. The process id is now cached lazily and reset like other cached values. Retrieval of the process id will fall back to the old $qC method for vendor==Apple and os==iOS if the qProcessInfo retrieval fails.
Added a gdb remote protocol-level test to verify that $qProcessInfo reports a valid process id after launching a process, while the process is in the initial stopped state. Verifies the given process id is a currently valid process on host OSes for which we know how to check (MacOSX, Linux, {Free/Net}BSD). Ignores the live process check for OSes where we don't know how to do this. (I saw no portable way to do this in stock Python without pulling in other libs).
llvm-svn: 208241
Added a test validating that $qC after an inferior launch via $A
returns a thread id that an immediately followig $? reports for the
active thread. This is currently skipped on debugserver (the thread
ids don't match) and isn't yet implemented in TOT for llgs.
llvm-svn: 208061
Pushed gdbremote protocol sequence expectations into a separate
class and defer matching of llgs/debugserver output to the
sequence entry. Pre-step to adding regex matching and
grouped content collecting.
No longer require anything before the read/send packet
portion of slurped-up log lines used for setting up
gdb remote test sequences. Several packet logging options
produce a wide range of content before the read/send packet.
Added helpers to TestLldbGdbServer to clean up test setup
and test expectations matching.
llvm-svn: 207998
Tests added for debugserver and lldb-gdbserver. lldb-gdbserver marked as
XFAIL on top of tree.
Added build_gdbremote_A_packet test helper to construct a gdbremote A
launch packet from a list of args.
llvm-svn: 207568
TestLldbGdbServer now supports both lldb-gdbserver (llgs) and
debugserver tests. Similar to the dsym/dwarf tests, they allow
running the same underlying gdb remote protocol tests against
lldb-gdbserver and debugserver. This will help make sure the
protocol-level tests for lldb-gdbserver faithfully represent
what debugserver does on OS X.
Switched back gdb remote protocol test logging to warning
and above (accidentally submitted it at debug level in a
recent commit).
llvm-svn: 207395
Adds try/except blocks around clean-up code. Prevents a race between gdb
remote kill command reception by llgs (which leads llgs to shut down)
and the pexpect server kill (which can fail if the kill command handling
completes first). Warnings are emitted on the logger for any clean-up
code that fails.
llvm-svn: 207273
optional path prior to the file base name.
On Linux x86_64 (Ubuntu 12.04) I am sometimes getting a full path
on the stderr.txt. This changes the test for target.error-path and
target.output-path settings to ignore any optional directory before
the expected file base name.
llvm-svn: 207272
currently associated with a given thread, on relevant targets.
Change the queue detection code to verify that the queues
associated with all live threads are included in the list.
<rdar://problem/16411314>
llvm-svn: 207160
lldbgdbserverutils.py has a new expect_lldb_gdbserver_replay() method
that plays back gdb remote send/receive packets. These packets are the
log lines that come from running the 'log enable gdb-remote packets',
either from the lldb-gdbserver side or the lldb side. There's a flag
to flip which side is the send (lldb-gdbserver input or lldb-gdbserver
output).
This first checkin tests the initial gdbremote handshake, the ability
to turn on the no-ack mode communication style, thread suffix support,
and list threads in stop reply support. The last two are marked xfail
as top of tree does not yet support these.
--This line, and those below, will be ignored--
M test/tools/lldb-gdbserver/TestLldbGdbServer.py
M test/tools/lldb-gdbserver/lldbgdbserverutils.py
llvm-svn: 206930
Since these tests pass on (at least some) other platforms, change the
decorators to @expectedFailureDwarwin. Tested on FreeBSD with Clang 3.4
and libc++.
rdar://9980907
rdar://15367233
llvm-svn: 206895
Our build is still getting this test to fail with the presence of const in
'(Foo &const) y = 0x' and '(Foo &&const) z = 0x'. This change simply changes
the match substrings to ignore the portion after the final '&' and before the
closing ')'. This should cover the presence (or absence) of the const qualifier.
llvm-svn: 206762
The underlying issue was actually a Clang bug, now fixed. The test now
reports XPASS for me locally and on the buildbot.
llvm.org/pr17183 (LLDB)
llvm.org/pr18950 (Clang)
llvm-svn: 206761
Perhaps these should be @expectedFailureDarwin instead of
@unittest2.expectedFailure (applying to all hosts); I'm not aware of
the details in the rdars.
Just add a comment for now, for the benefit of anyone investigating
FreeBSD test issues in the future.
rdar://9980907
rdar://15367233
llvm-svn: 206760
The additional "const" breaks the FreeBSD buildbot, and does not appear
to be due to a LLVM or Clang change. Revert the change while
investigating further.
This reverts revision 206619.
llvm-svn: 206751
The lldb-gdbserver tests are skipped if the lldb-gdbserver exe cannot be found (currently only built for Linux and FreeBSD). The lldb-gdbserver exe is found by the LLDB_EXEC environment variable, using the same dir as the lldb exe, and then replacing lldb with lldb-gdbserver.
llvm-svn: 206731
Enable data formatters to see-through pointers/references to typedefs
For instance, if Foo is a typedef to Bar, and there is a formatter for any/all of Bar*, Bar&, Bar&&, then Foo*, Foo&, and Foo&& should pick these up if Foo-specific formatters don't exist
llvm-svn: 205939
Calling mutex_lock from one thread and then mutex_unlock from another is
not permitted. Replace the awkward mutex usage with a mutex and
condition variable.
llvm.org/pr18061
llvm-svn: 205900
Todd Fiala