This has quite positive performance impact according to measurements.
Before previous fixes to limit the optimization that was too high
and blowed compile time and scratch usage, but now this is gone and
we can bump the threshold.
Differential Revision: https://reviews.llvm.org/D29505
llvm-svn: 294032
This re-applies commit r292189, reverted in r292191.
SelectionDAGBuilder recognizes libfuncs using some homegrown
parameter type-checking.
Use TLI instead, removing another heap of redundant code.
This isn't strictly NFC, as the SDAG code was too lax.
Concretely, this means changes are required to a few tests:
- calling a non-variadic function via a variadic prototype isn't OK;
it just happens to work on x86_64 (but not on, e.g., aarch64).
- mempcpy has a size_t parameter; the SDAG code accepts any integer
type, which meant using i32 on x86_64 worked.
- a handful of SystemZ tests check the SDAG support for lax prototype
checking: Ulrich agrees on removing them.
I don't think it's worth supporting any of these (IMO) invalid
testcases. Instead, fix them to be more meaningful.
llvm-svn: 294028
This generalizes memory access sorting to use differences between SCEVs,
instead of relying on constant offsets. That allows us to properly do
SLP vectorization of non-sequentially ordered loads within loops bodies.
Differential Revision: https://reviews.llvm.org/D29425
llvm-svn: 294027
Summary:
- GetFileWithUUID: All platforms except PlatformDarwin had this.
However, I see no reason why this code would not apply there as well.
- GetProcessInfo, FindProcesses: The implementation was the same in all classes.
- GetFullNameForDylib: This code should apply to all non-darwin
platforms. I've kept the PlatformDarwin override as the situation is
different there.
Reviewers: clayborg, krytarowski, emaste
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D29496
llvm-svn: 294019
Currently these flags are always the inverse of each other, so there is
no need to keep them separate.
Differential Revision: https://reviews.llvm.org/D29471
llvm-svn: 294016
The importer was previously using ModuleLinker in a sort of "IRMover mode". Use
IRMover directly instead in order to remove a level of indirection.
I will remove all importing support from ModuleLinker in a separate
change.
Differential Revision: https://reviews.llvm.org/D29468
llvm-svn: 294014
The .end <symbol> directive for MIPS marks the end of a symbol and sets the
symbol's size. Previously, the corresponding emitDirective handler asserted
that a function's size could be evaluated to an absolute value at that point
in time.
This cannot be done with when directives like .align have been encountered,
instead set the function's size to the corresponding symbolic expression and
let ELFObjectWriter resolve the expression to an absolute value. This avoids
a redundant call to evaluateAsAbsolute.
llvm-svn: 294012
After r260016 and r260017 disabled typo correction for ivars and properties
clang didn't report errors about unresolved identifier in the base of ivar and
property ref expressions. This meant that clang invoked CodeGen on invalid AST
which then caused a crash.
This commit re-enables typo correction for ivars and properites, and fixes the
PR25113 & PR26486 (that were originally fixed in r260017 and r260016) in a
different manner by transforming the Objective-C ivar reference expression with
'IsFreeIvar' preserved.
rdar://30310772
llvm-svn: 294008
This is a fix for Bugzilla 31813.
The problem is that the tokenizer does not create a separate token for
":" unless there's white space before it. Changed it to always create
a token for ":" and reworked some logic that relied on ":" being
attached to some tokens like "global:" and "local:".
llvm-svn: 294006
With a synthetic merge section we can have, for example, a single
.rodata section with stings, fixed sized constants and non merge
constants.
I can be simplified further by not setting Entsize, but that is
probably better done is a followup patch.
This should allow some cleanup in the linker script code now that
every output section command maps to just one output section.
llvm-svn: 294005
ISD::DELETED_NODE && "NodeToMatch was removed partway through
selection"' failed.
NodeToMatch can be modified during matching, but code does not handle
this situation.
Differential Revision: https://reviews.llvm.org/D29292
llvm-svn: 294003
This test relies on sanitizer common interceptor to pick the oldest version of
sem_init function from Glibc. But LSan actually doesn't intercept sem_init, thus
the new implementation is called that causes test failure. Disable it for LSan x86,
the proper fix would require to check Glibc version at runtime and adjust
GET_SEM_VALUE(V) accordingly.
llvm-svn: 294001
Summary:
The tail call optimisation is performed before register allocation, so
at that point we don't know if LR is being spilt or not. If LR was spilt
to the stack, then we cannot do a tail call optimisation. That would
involve popping back into LR which is not possible in Thumb1 code.
Reviewers: rengolin, jmolloy, rovka, olista01
Reviewed By: olista01
Subscribers: llvm-commits, aemerson
Differential Revision: https://reviews.llvm.org/D29020
llvm-svn: 294000
Summary:
llc would hit a fatal error for errors in inline assembly. The
diagnostics message is now printed.
Reviewers: rengolin, MatzeB, javed.absar, anemet
Reviewed By: anemet
Subscribers: jyknight, nemanjai, llvm-commits
Differential Revision: https://reviews.llvm.org/D29408
llvm-svn: 293999
Summary:
The comment aligner was skipping over newly broken comment lines. This patch fixes that.
source:
```
int ab; // line
int a; // long long
```
format with column limit 15 before:
```
int ab; // line
int a; // long
// long
```
format with column limit 15 after:
```
int ab; // line
int a; // long
// long
```
Reviewers: djasper
Reviewed By: djasper
Subscribers: cfe-commits, klimek
Differential Revision: https://reviews.llvm.org/D29486
llvm-svn: 293997
Currently LLVM supports vectorization of horizontal reduction
instructions with initial value set to 0. Patch supports vectorization
of reduction with non-zero initial values. Also it supports a
vectorization of instructions with some extra arguments, like:
float f(float x[], int a, int b) {
float p = a % b;
p += x[0] + 3;
for (int i = 1; i < 32; i++)
p += x[i];
return p;
}
Patch allows vectorization of this kind of horizontal reductions.
Differential Revision: https://reviews.llvm.org/D28961
llvm-svn: 293994
This reverts commit r293970.
After more discussion, this belongs to the linker side and
there is no added value to do it at this level.
llvm-svn: 293993
Exit loop analysis early if suitable private access found.
Do not account for GEPs which are invariant to loop induction variable.
Do not account for Allocas which are too big to fit into register file anyway.
Add option for tuning: -amdgpu-unroll-threshold-private.
Differential Revision: https://reviews.llvm.org/D29473
llvm-svn: 293991
If LLVM was configured with an x86_64-apple-macosx host triple, this
test would fail, as the API works but the triple isn't in the whitelist.
llvm-svn: 293990
On Windows, the symbols "___stop___sancov_guards" and "___start___sancov_guards"
are not defined automatically. So, we need to take a different approach.
We define 3 sections:
Section ".SCOV$A" will only hold a variable ___start___sancov_guard.
Section ".SCOV$M" will hold the main data.
Section ".SCOV$Z" will only hold a variable ___stop___sancov_guards.
When linking, they will be merged sorted by the characters after the $, so we
can use the pointers of the variables ___[start|stop]___sancov_guard to know the
actual range of addresses of that section.
In this diff, I updated instrumentation to include all the guard arrays in
section ".SCOV$M".
Differential Revision: https://reviews.llvm.org/D28434
llvm-svn: 293987
While looking to add support for placing singular types (types that will
only be emitted in one place (such as attached to a strong vtable or
explicit template instantiation definition)) not in type units (since
type units have overhead) I stumbled across that change causing an
increase in pubtypes.
Turns out we were missing some types from type units if they were only
referenced from other type units and not from the debug_info section.
This fixes that, following GCC's line of describing the offset of such
entities as the CU die (since there's no compile unit-relative offset
that would describe such an entity - they aren't in the CU). Also like
GCC, this change prefers to describe the type stub within the CU rather
than the "just use the CU offset" fallback where possible. This may give
the DWARF consumer some opportunity to find the extra info in the type
stub - though I'm not sure GDB does anything with this currently.
The size of the pubnames/pubtypes sections now match exactly with or
without type units enabled.
This nearly triples (+189%) the pubtypes section for a clang self-host
and grows pubnames by 0.07% (without compression). For a total of 8%
increase in debug info sections of the objects of a Split DWARF build
when using type units.
llvm-svn: 293971
When a symbol is not exported outside of the
DSO, it is can be hidden. Usually we try to internalize
as much as possible, but it is not always possible, for
instance a symbol can be referenced outside of the LTO
unit, or there can be cross-module reference in ThinLTO.
This is a recommit of r293912 after fixing build failures,
and a recommit of r293918 after fixing LLD tests.
Differential Revision: https://reviews.llvm.org/D28978
llvm-svn: 293970
Mike Aizatsky