The AffineMap in the MemRef inferred by SubViewOp may have uncompressed symbols which result in type mismatch on otherwise unused symbols. Make the computation of the AffineMap compress those unused symbols which results in better canonical types.
Additionally, improve the error message to report which inferred type was expected.
Differential Revision: https://reviews.llvm.org/D96551
With the standard dialect being split up, the set of dialects that are
used when converting to GPU is growing. This change modifies the
SCFToGpu pass to allow all operations inside launch bodies.
Differential Revision: https://reviews.llvm.org/D96480
Previously broadcast was a binary op. Now it can support more inputs.
This has been changed in such a way that for now, this is an NFC for
all broadcast operations that were previously legal.
Differential Revision: https://reviews.llvm.org/D95777
This reverts commit 511dd4f438 along with
a couple fixes.
Original message:
Now the context is the first, rather than the last input.
This better matches the rest of the infrastructure and makes
it easier to move these types to being declaratively specified.
Phabricator: https://reviews.llvm.org/D96111
Now the context is the first, rather than the last input.
This better matches the rest of the infrastructure and makes
it easier to move these types to being declaratively specified.
Differential Revision: https://reviews.llvm.org/D96111
This patch introduces a few more straightforward patterns
to convert vector ops operating on 1-4 element vectors
to their corresponding SPIR-V counterparts.
This patch also enables converting vector<1xT> to T.
Reviewed By: ThomasRaoux
Differential Revision: https://reviews.llvm.org/D96042
Historically, Linalg To LLVM conversion subsumed numerous other conversions,
including (affine) loop lowerings to CFG and conversions from the Standard and
Vector dialects to the LLVM dialect. This was due to the insufficient support
for partial conversions in the infrastructure that essentially required
conversions that involve type change (in this case, !linalg.range to
!llvm.struct) to be performed in a single conversion sweep. This is no longer
the case so remove the subsumed conversions and run them as separate passes
when necessary.
Depends On D95317
Reviewed By: nicolasvasilache
Differential Revision: https://reviews.llvm.org/D96008
This makes ignoring a result explicit by the user, and helps to prevent accidental errors with dropped results. Marking LogicalResult as no discard was always the intention from the beginning, but got lost along the way.
Differential Revision: https://reviews.llvm.org/D95841
Historically, the Vector to LLVM dialect conversion subsumed the Standard to
LLVM dialect conversion patterns. This was necessary because the conversion
infrastructure did not have sufficient support for reconciling type
conversions. This support is now available. Only keep the patterns related to
the Vector dialect in the Vector to LLVM conversion and require type casts
operations to be inserted if necessary. These casts will be removed by
following conversions if possible. Update integration tests to also run the
Standard to LLVM conversion.
There is a significant amount of test churn, which is due to (a) unnecessarily
strict tests in VectorToLLVM and (b) many patterns actually targeting Standard
dialect ops instead of LLVM dialect ops leading to tests actually exercising a
Vector->Standard->LLVM conversion. This churn is a good illustration of the
reason to make the conversion partial: now the tests only check the code in the
Vector to LLVM conversion and will not be randomly broken by changes in
Standard to LLVM conversion.
Arguably, it may be possible to extract Vector to Standard patterns into a
separate pass, but given the ongoing splitting of the Standard dialect, such
pass will be short-lived and will require further refactoring.
Depends On D95626
Reviewed By: nicolasvasilache, aartbik
Differential Revision: https://reviews.llvm.org/D95685
Add the conversion pattern for vector.bitcast to lower it to
the LLVM Dialect.
Reviewed By: ThomasRaoux, aartbik
Differential Revision: https://reviews.llvm.org/D95579
The __resume function trips up LLVM's 'X86 DAG->DAG Instruction Selection' unless optimizations are disabled.
Only adding the __resume function when it's needed allows lowering through AsyncToLLVM and LLVM without '-O0' as long as the coroutine functionality is not used.
Reviewed By: ezhulenev
Differential Revision: https://reviews.llvm.org/D95868
[s|z]exti ops do not have the same operand and result type.
As a consequence, the lowering of the n-D vector form needs to be relaxed a bit.
This revision additionally performs a few NFC renamings of variables to make them more intuitive.
Differential Revision: https://reviews.llvm.org/D95760
Comitted log, exp, maximum, minimum, comparison, ceil and floor conversions from TOSA to LinAlg. Support for signless integer and floating point.
Reviewed By: rsuderman
Differential Revision: https://reviews.llvm.org/D95839
It is no longer necessary to also convert other "standard" ops along with the
complex dialect: the element types are now built-in integers or floating point
types, and the top-level cast between complex and struct is automatically
inserted and removed in progressive lowering.
Reviewed By: herhut
Differential Revision: https://reviews.llvm.org/D95625
The subview verifier in the rank-reduced case is plainly skipping verification
when the resulting type is a memref with empty affine map. This is generally incorrect.
Instead, form the actual expected rank-reduced MemRefType that takes into account the projections of 1's dimensions. Then, check the canonicalized expected rank-reduced type against the canonicalized candidate type.
Differential Revision: https://reviews.llvm.org/D95316
OffsetSizeAndStrideOpInterface now have the ability to specify only a leading subset of
offset, sizes, strides operands/attributes.
The size of that leading subset must be limited by the corresponding entry in `getArrayAttrMaxRanks` to avoid overflows.
Missing trailing dimensions are assumed to span the whole range (i.e. [0 .. dim)).
This brings more natural semantics to slice-like op on top of subview and is a simplifies to removing all uses of SliceOp in dependent projects.
Differential revision: https://reviews.llvm.org/D95441
Depends On D95000
Move async.execute outlining and async -> async.runtime lowering into the separate Async transformation pass
Reviewed By: mehdi_amini
Differential Revision: https://reviews.llvm.org/D95311
Adds vp2intersect to the AVX512 dialect and defines a lowering to the
LLVM dialect.
Author: Matthias Springer <springerm@google.com>
Differential Revision: https://reviews.llvm.org/D95301
Instead of using llvm.call operations to call LLVM coro intrinsics use Coro operations from the LLVM dialect.
(This was reviewed as a part of https://reviews.llvm.org/D94923 but was lost in arc land from local branch)
Differential Revision: https://reviews.llvm.org/D95405
[NFC] No new functionality, mostly a cleanup and one more abstraction level between Async and LLVM IR.
Instead of lowering from Async to LLVM coroutines and Async Runtime API in one shot, do it progressively via async.coro and async.runtime operations.
1. Lower from async to async.runtime/coro (e.g. async.execute to function with coro setup and runtime calls)
2. Lower from async.runtime/coro to LLVM intrinsics and runtime API calls
Intermediate coro/runtime operations will allow to run transformations on a higher level IR and do not try to match IR based on the LLVM::CallOp properties.
Although async.coro is very close to LLVM coroutines, it is not exactly the same API, instead it is optimized for usability in async lowering, and misses a lot of details that are present in @llvm.coro intrinsic.
Reviewed By: ftynse
Differential Revision: https://reviews.llvm.org/D94923
spv.Ordered/spv.Unordered are meant for OpenCL Kernel capability.
For Vulkan Shader capability, we should use spv.IsNan to check
whether a number is NaN.
Add a new pattern for converting `std.cmpf ord|uno` to spv.IsNan
and bumped the pattern converting to spv.Ordered/spv.Unordered
to a higher benefit. The SPIR-V target environment will properly
select between these two patterns.
Reviewed By: mravishankar
Differential Revision: https://reviews.llvm.org/D95237
- Extend spirv::ConstantOp::getZero/One to handle float, vector of int, and vector of float.
- Refactor ZeroExtendI1Pattern to use getZero/One methods.
- Add one more test for lowering std.zexti which extends vector<4xi1> to vector<4xi64>.
Reviewed By: antiagainst
Differential Revision: https://reviews.llvm.org/D95120
Define OrderedOp and UnorderedOp instructions in SPIR-V and convert
cmpf operations with `ord` and `uno` tag to these instructions
respectively.
Differential Revision: https://reviews.llvm.org/D95098
TosaToLinalg was depending on its header file indirectly through
Passes.h rather than directly. This removes that indirection.
Differential Revision: https://reviews.llvm.org/D94706
Initial commit to add support for lowering from TOSA to Linalg. The focus is on
the essential infrastructure for these lowerings and integration with existing
passes.
Includes lowerings for a subset of operations including:
abs, add, sub, pow, and, or, xor, left shift, right shift, tanh
Lit tests are used to validate correctness.
Differential Revision: https://reviews.llvm.org/D94247
Continue the convergence between LLVM dialect and built-in types by using the
built-in vector type whenever possible, that is for fixed vectors of built-in
integers and built-in floats. LLVM dialect vector type is still in use for
pointers, less frequent floating point types that do not have a built-in
equivalent, and scalable vectors. However, the top-level `LLVMVectorType` class
has been removed in favor of free functions capable of inspecting both built-in
and LLVM dialect vector types: `LLVM::getVectorElementType`,
`LLVM::getNumVectorElements` and `LLVM::getFixedVectorType`. Additional work is
necessary to design an implemented the extensions to built-in types so as to
remove the `LLVMFixedVectorType` entirely.
Note that the default output format for the built-in vectors does not have
whitespace around the `x` separator, e.g., `vector<4xf32>` as opposed to the
LLVM dialect vector type format that does, e.g., `!llvm.vec<4 x fp128>`. This
required changing the FileCheck patterns in several tests.
Reviewed By: mehdi_amini, silvas
Differential Revision: https://reviews.llvm.org/D94405
Lowering of async dialect uses a fixed type converter and therefore does not support lowering non-standard types.
This revision adds a structural conversion so that non-standard types in `!async.value`s can be lowered to LLVM before lowering the async dialect itself.
Reviewed By: ezhulenev
Differential Revision: https://reviews.llvm.org/D94404
The dialect conversion framework was enhanced to handle type
conversion automatically. OpConversionPattern already contains
a pointer to the TypeConverter. There is no need to duplicate it
in a separate subclass. This removes the only reason for a
SPIRVOpLowering subclass. It adapts to use core infrastructure
and simplifies the code.
Also added a utility function to OpConversionPattern for getting
TypeConverter as a certain subclass.
Reviewed By: hanchung
Differential Revision: https://reviews.llvm.org/D94080
Adding the ability to index the base address brings these operations closer
to the transfer read and write semantics (with lowering advantages), ensures
more consistent use in vector MLIR code (easier to read), and reduces the
amount of code duplication to lower memrefs into base addresses considerably
(making codegen less error-prone).
Reviewed By: ThomasRaoux
Differential Revision: https://reviews.llvm.org/D94278
Continue the convergence between LLVM dialect and built-in types by replacing
the bfloat, half, float and double LLVM dialect types with their built-in
counterparts. At the API level, this is a direct replacement. At the syntax
level, we change the keywords to `bf16`, `f16`, `f32` and `f64`, respectively,
to be compatible with the built-in type syntax. The old keywords can still be
parsed but produce a deprecation warning and will be eventually removed.
Depends On D94178
Reviewed By: mehdi_amini, silvas, antiagainst
Differential Revision: https://reviews.llvm.org/D94179
The LLVM dialect type system has been closed until now, i.e. did not support
types from other dialects inside containers. While this has had obvious
benefits of deriving from a common base class, it has led to some simple types
being almost identical with the built-in types, namely integer and floating
point types. This in turn has led to a lot of larger-scale complexity: simple
types must still be converted, numerous operations that correspond to LLVM IR
intrinsics are replicated to produce versions operating on either LLVM dialect
or built-in types leading to quasi-duplicate dialects, lowering to the LLVM
dialect is essentially required to be one-shot because of type conversion, etc.
In this light, it is reasonable to trade off some local complexity in the
internal implementation of LLVM dialect types for removing larger-scale system
complexity. Previous commits to the LLVM dialect type system have adapted the
API to support types from other dialects.
Replace LLVMIntegerType with the built-in IntegerType plus additional checks
that such types are signless (these are isolated in a utility function that
replaced `isa<LLVMType>` and in the parser). Temporarily keep the possibility
to parse `!llvm.i32` as a synonym for `i32`, but add a deprecation notice.
Reviewed By: mehdi_amini, silvas, antiagainst
Differential Revision: https://reviews.llvm.org/D94178
This commit adds a new trait that can be attached to ops that have
unsigned semantics.
TODO:
- Check if other places in code can use the new attribute (possibly in this patch).
- Add a similar `SignedOp` attribute (in a new patch).
Reviewed By: antiagainst
Differential Revision: https://reviews.llvm.org/D94068
BEGIN_PUBLIC
[mlir] Remove LLVMType, LLVM dialect types now derive Type directly
This class has become a simple `isa` hook with no proper functionality.
Removing will allow us to eventually make the LLVM dialect type infrastructure
open, i.e., support non-LLVM types inside container types, which itself will
make the type conversion more progressive.
Introduce a call `LLVM::isCompatibleType` to be used instead of
`isa<LLVMType>`. For now, this is strictly equivalent.
END_PUBLIC
Depends On D93681
Reviewed By: mehdi_amini
Differential Revision: https://reviews.llvm.org/D93713
Implement Bug 46698, making ODS synthesize a getType() method that returns a
specific C++ class for OneResult methods where we know that class. This eliminates
a common source of casts in things like:
myOp.getType().cast<FIRRTLType>().getPassive()
because we know that myOp always returns a FIRRTLType. This also encourages
op authors to type their results more tightly (which is also good for
verification).
I chose to implement this by splitting the OneResult trait into itself plus a
OneTypedResult trait, given that many things are using `hasTrait<OneResult>`
to conditionalize various logic.
While this changes makes many many ops get more specific getType() results, it
is generally drop-in compatible with the previous behavior because 'x.cast<T>()'
is allowed when x is already known to be a T. The one exception to this is that
we need declarations of the types used by ops, which is why a couple headers
needed additional #includes.
I updated a few things in tree to remove the now-redundant `.cast<>`'s, but there
are probably many more than can be removed.
Differential Revision: https://reviews.llvm.org/D93790
1. Add new methods to Async runtime API to support yielding async values
2. Add lowering from `async.yield` with value payload to the new runtime API calls
`async.value` lowering requires that payload type is convertible to LLVM and supported by `llvm.mlir.cast` (DialectCast) operation.
Reviewed By: csigg
Differential Revision: https://reviews.llvm.org/D93592
This commit renames various SPIR-V related conversion files for
consistency. It drops the "Convert" prefix to various files and
fixes various comment headers.
Reviewed By: hanchung, ThomasRaoux
Differential Revision: https://reviews.llvm.org/D93489
Previously all SCF to SPIR-V conversion patterns were tested as
the -convert-gpu-to-spirv pass. That obscured the structure we
want. This commit fixed it.
Reviewed By: ThomasRaoux, hanchung
Differential Revision: https://reviews.llvm.org/D93488
LLVMType contains numerous static constructors that were initially introduced
for API compatibility with LLVM. Most of these merely forward to arguments to
`SpecificType::get` (MLIR defines classes for all types, unlike LLVM IR), while
some introduce subtle semantics differences due to different modeling of MLIR
types (e.g., structs are not auto-renamed in case of conflicts). Furthermore,
these constructors don't match MLIR idioms and actively prevent us from making
the LLVM dialect type system more open. Remove them and use `SpecificType::get`
instead.
Depends On D93680
Reviewed By: mehdi_amini
Differential Revision: https://reviews.llvm.org/D93681
One common situation is to create a lot of IR at a well known location,
e.g. when doing a big rewrite from one dialect to another where you're expanding
ops out into lots of other ops.
For these sorts of situations, it is annoying to pass the location into
every create call. As we discused in a few threads on the forum, a way to help
with this is to produce a new sort of builder that holds a location and provides
it to each of the create<> calls automatically.
This patch implements an ImplicitLocOpBuilder class that does this. We've had
good experience with this in the CIRCT project, and it makes sense to upstream to
MLIR.
I picked a random pass to adopt it to show the impact, but I don't think there is
any particular need to force adopt it in the codebase.
Differential Revision: https://reviews.llvm.org/D93717
LLVMType contains multiple instance methods that were introduced initially for
compatibility with LLVM API. These methods boil down to `cast` followed by
type-specific call. Arguably, they are mostly used in an LLVM cast-follows-isa
anti-pattern. This doesn't connect nicely to the rest of the MLIR
infrastructure and actively prevents it from making the LLVM dialect type
system more open, e.g., reusing built-in types when appropriate. Remove such
instance methods and replaces their uses with apporpriate casts and methods on
derived classes. In some cases, the result may look slightly more verbose, but
most cases should actually use a stricter subtype of LLVMType anyway and avoid
the isa/cast.
Reviewed By: mehdi_amini
Differential Revision: https://reviews.llvm.org/D93680
This commit addresses the issue of lowering affine.for and
affine.parallel having return values. Relevant test cases are also
added.
Signed-off-by: Prateek Gupta <prateek@polymagelabs.com>
Differential Revision: https://reviews.llvm.org/D93090
Transfer_ops can now work on both buffers and tensor. Right now, lowering of
the tensor case is not supported yet.
Differential Revision: https://reviews.llvm.org/D93500
This class used to serve a few useful purposes:
* Allowed containing a null DictionaryAttr
* Provided some simple mutable API around a DictionaryAttr
The first of which is no longer an issue now that there is much better caching support for attributes in general, and a cache in the context for empty dictionaries. The second results in more trouble than it's worth because it mutates the internal dictionary on every action, leading to a potentially large number of dictionary copies. NamedAttrList is a much better alternative for the second use case, and should be modified as needed to better fit it's usage as a DictionaryAttrBuilder.
Differential Revision: https://reviews.llvm.org/D93442
This better matches the rest of the infrastructure, is much simpler, and makes it easier to move these types to being declaratively specified.
Differential Revision: https://reviews.llvm.org/D93432
This commit shuffles SPIR-V code around to better follow MLIR
convention. Specifically,
* Created IR/, Transforms/, Linking/, and Utils/ subdirectories and
moved suitable code inside.
* Created SPIRVEnums.{h|cpp} for SPIR-V C/C++ enums generated from
SPIR-V spec. Previously they are cluttered inside SPIRVTypes.{h|cpp}.
* Fixed include guards in various header files (both .h and .td).
* Moved serialization tests under test/Target/SPIRV.
* Renamed TableGen backend -gen-spirv-op-utils into -gen-spirv-attr-utils
as it is only generating utility functions for attributes.
Reviewed By: mravishankar
Differential Revision: https://reviews.llvm.org/D93407
This commit splits SPIR-V's serialization and deserialization code
into separate libraries. The motiviation being that the serializer
is used more often the deserializer and therefore lumping them
together unnecessarily increases binary size for the most common
case.
This commit also moves these libraries into the Target/ directory
to follow MLIR convention.
Reviewed By: antiagainst
Differential Revision: https://reviews.llvm.org/D91548
This reverts commit 0d48d265db.
This reapplies the following commit, with a fix for CAPI/ir.c:
[mlir] Start splitting the `tensor` dialect out of `std`.
This starts by moving `std.extract_element` to `tensor.extract` (this
mirrors the naming of `vector.extract`).
Curiously, `std.extract_element` supposedly works on vectors as well,
and this patch removes that functionality. I would tend to do that in
separate patch, but I couldn't find any downstream users relying on
this, and the fact that we have `vector.extract` made it seem safe
enough to lump in here.
This also sets up the `tensor` dialect as a dependency of the `std`
dialect, as some ops that currently live in `std` depend on
`tensor.extract` via their canonicalization patterns.
Part of RFC: https://llvm.discourse.group/t/rfc-split-the-tensor-dialect-from-std/2347/2
Differential Revision: https://reviews.llvm.org/D92991
This starts by moving `std.extract_element` to `tensor.extract` (this
mirrors the naming of `vector.extract`).
Curiously, `std.extract_element` supposedly works on vectors as well,
and this patch removes that functionality. I would tend to do that in
separate patch, but I couldn't find any downstream users relying on
this, and the fact that we have `vector.extract` made it seem safe
enough to lump in here.
This also sets up the `tensor` dialect as a dependency of the `std`
dialect, as some ops that currently live in `std` depend on
`tensor.extract` via their canonicalization patterns.
Part of RFC: https://llvm.discourse.group/t/rfc-split-the-tensor-dialect-from-std/2347/2
Differential Revision: https://reviews.llvm.org/D92991
- use ConvertOpToLLVMPattern to avoid explicit casting and in most cases the
constructor can be reused to save a few lines of code.
Differential Revision: https://reviews.llvm.org/D92989
This is needed so a listener hears all changes during the dialect
conversion to allow correct rollbacks upon failure.
Differential Revision: https://reviews.llvm.org/D92685
This is part of a larger refactoring the better congregates the builtin structures under the BuiltinDialect. This also removes the problematic "standard" naming that clashes with the "standard" dialect, which is not defined within IR/. A temporary forward is placed in StandardTypes.h to allow time for downstream users to replaced references.
Differential Revision: https://reviews.llvm.org/D92435
A separate AVX512 lowering pass does not compose well with the regular
vector lowering pass. As such, it is at risk of code duplication and
lowering inconsistencies. This change removes the separate AVX512 lowering
pass and makes it an "option" in the regular vector lowering pass
(viz. vector dialect "augmented" with AVX512 dialect).
Reviewed By: rriddle
Differential Revision: https://reviews.llvm.org/D92614
There isn't a good reason for anything within IR to specifically reference any of the builtin operations. The only place that had a good reason in the past was AsmPrinter, but the behavior there doesn't need to hardcode ModuleOp anymore.
Differential Revision: https://reviews.llvm.org/D92448
Given that OpState already implicit converts to Operator*, this seems reasonable.
The alternative would be to add more functions to OpState which forward to Operation.
Reviewed By: rriddle, ftynse
Differential Revision: https://reviews.llvm.org/D92266
Stephan Herhut