The runtimes build uses variables set by add_lit_testsuite to collect
testsuites from all the runtimes.
Differential Revision: https://reviews.llvm.org/D97913
This should allow running tests with the interpreter in some of the
default paths where Python for Windows might be installed.
Differential Revision: https://reviews.llvm.org/D97369
Several subprojects have targets that do the same thing, and they all
follow the same naming convention: llvm-test-depends, clang-test-depends,
lld-test-depends, etc.
This makes libc++ consistent with other LLVM projects.
Thanks to Duncan Exon Smith for noticing and suggesting the change.
Differential Revision: https://reviews.llvm.org/D94499
Also, enable them whenever we detect that gdb is available. Previously,
these tests would basically never run because they relied on a CMake
configuration option that defaulted to OFF.
Differential Revision: https://reviews.llvm.org/D91434
To make it clearer this is about whether the library supports the debug
mode at all, not whether the debug mode is enabled. Per comment by Nico
Weber on IRC.
Some libc++ builds may want to disable support for the debug mode,
for example to reduce code size or because the current implementation
of the debug mode requires a global map. This commit adds the
LIBCXX_ENABLE_DEBUG_MODE CMake option and ties it into the test
suite.
It also adds a CI job to test this configuration going forward.
Differential Revision: https://reviews.llvm.org/D88923
This allows passing parameters to the test suites without using
LLVM_LIT_ARGS. The problem is that we sometimes want to set some
Lit arguments on the CMake command line, but the Lit parameters in
a CMake cache file. If the only knob to do that is LLVM_LIT_ARGS,
the command-line entry overrides the cache one, and the parameters
set by the cache are ignored.
This fixes a current issue with the build bots that they completely
ignore the 'std' param set by Lit, because other Lit arguments are
provided via LLVM_LIT_ARGS on the CMake command-line.
Before this patch, the libc++ test suite first loads lit.site.cfg
(generated by CMake), and then lit.cfg. It's also possible to load
lit.cfg before lit.site.cfg and to point to a custom lit.site.cfg
file using '--param=libcxx_site_config'. However, in that case, lit.cfg
still relies on the site configuration filling up the 'config' object
like the default lit.site.cfg file does, which isn't flexible enough.
This commit simplifies the setup by having just a single Lit site config
file per CMake configuration, and always loading exactly that config file.
However, the config file to use can be selected when setting up CMake via
the LIBCXX_TEST_CONFIG setting. Furthermore, the site configs are entirely
standalone, which means that a new site config can be added that doesn't
need to conform what's expected by config.py.
Differential Revision: https://reviews.llvm.org/D81846
The integration between CMake and executor selection in the new format
wasn't very flexible -- only the default executor and SSH executors were
supported.
This patch makes it possible to specify arbitrary executors with the new
format. With the new testing format, a custom executor is just a script
that gets called with a command-line to execute, and some arguments like
--env, --codesign_identity and --execdir. As such, the default executor
is just run.py.
Remote execution with the SSH executor can be achived by specifying
LIBCXX_EXECUTOR="<path-to-ssh.py> --host <host>". Similarly, arbitrary
scripts can be provided.
When running the tests through `lit` directly instead of through `check-cxx`,
it is required to manually build the `cxx` (and often `cxx_experimental`)
targets. Instead of having to do that manually, this commit adds a new
target `check-cxx-deps` that does that for you.
Instead of hardcoding absolute paths on the build-host in the executables,
use relative paths from the current working directory. Also, use
FILE_DEPENDENCIES to mark the static test env as being required by
the relevant tests.
Given a SSH executor that copies the files to the remote host properly,
the tests can be run on that remote host.
This patch reimplements the dynamic filesystem helper using Posix
functionality instead of relying on Python. The primary reason for
doing this is that it allows running the libc++ test suite on devices
that do not have Python.
Differential Revision: https://reviews.llvm.org/D77140
Previously, filesystem tests would require LIBCXX_FILESYSTEM_DYNAMIC_TEST_ROOT
to be present in the environment and to match the value provided when
compiling, as a macro. This has the problem that it only allows for the
filesystem tests to be run on the same machine they are created.
Instead, we create a temporary directory for each test. Technically,
this is tricky to do because we're relying on some of the code that
we're testing to do this. However, there's no other portable way of
creating temporary direcories in C++, so this is difficult to avoid.
Differential Revision: https://reviews.llvm.org/D76731
We've been meaning to remove those targets for a while, and the fix is
simple enough cause they're all just aliases to other targets.
This is a re-application of f383fb40b1, wich was reverted in 04d48111b
because the build bots had not been updated yet. The build bot configurations
have now been updated not to use the deprecated targets, and I verified
that they were using the non-deprecated targets, so we should be good
unless I missed a bot.
Differential Revision: https://reviews.llvm.org/D76104
Introduced by https://reviews.llvm.org/D72687. This condition can happen
when the tests are not being run at all, and we're only trying to generate
the libc++ headers.
This reverts commit f383fb40b. It looks like several of our build bots
are still using the legacy target names, so we'll change those before
we commit this change again.
We've been meaning to remove those targets for a while, and the fix is
simple enough cause they're all just aliases to other targets.
There's no doubt this commit will break some CI systems, however the
fix is trivial.
Differential Revision: https://reviews.llvm.org/D76104
This reverts commit 41f4dfd63e.
It broke standalone libc++ builds, which now try to use libc++abi from the wrong directory, instead of system instance.
(cherry picked from commit 3573526c0286c9461f0459be1a4592b2214594e7)
Summary:
The `LIBCXX_CXX_ABI_LIBRARY_PATH` CMake variable is cached once in
libcxx/cmake/Modules/HandleLibCXXABI.cmake in the `setup_abi_lib` macro,
and then cached again in libcxx/test/CMakeLists.txt. There, if it is
not set to a value, it is by default set to `LIBCXX_LIBRARY_DIR`.
However, this new value is not actually cached, because the old (empty)
value has been already cached. Use the `FORCE` CMake flag so that it
is saved to the cache.
This should not break anything, because the code changed here previously
had no effect, when it should have.
Reviewers: jroelofs, bcraig, ldionne, EricWF, mclow.lists, vvereschaka, eastig
Reviewed By: vvereschaka
Subscribers: mgorny, christof, dexonsmith, libcxx-commits
Tags: #libc
Differential Revision: https://reviews.llvm.org/D69169
Summary:
The current version of the pretty printers are not python3 compatible,
so turn them off by default until sufficiently improved.
Reviewers: MaskRay, tamur
Subscribers: mgorny, christof, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68477
llvm-svn: 373796
Summary:
This commit allows specifying LIBCXX_ENABLE_PARALLEL_ALGORITHMS when
configuring libc++ in CMake. When that option is enabled, libc++ will
assume that the PSTL can be found somewhere on the CMake module path,
and it will provide the C++17 parallel algorithms based on the PSTL
(that is assumed to be available).
The commit also adds support for running the PSTL tests as part of
the libc++ test suite.
The first attempt to commit this failed because it exposed a bug in the
tests for modules. Now that this has been fixed, it should be safe to
commit this.
Reviewers: EricWF
Subscribers: mgorny, christof, jkorous, dexonsmith, libcxx-commits, mclow.lists, EricWF
Tags: #libc
Differential Revision: https://reviews.llvm.org/D60480
llvm-svn: 367903
This reverts r366593, which caused unforeseen breakage on the build bots.
I'm reverting until the problems have been figured out and fixed.
llvm-svn: 366603
Summary:
This commit allows specifying LIBCXX_ENABLE_PARALLEL_ALGORITHMS when
configuring libc++ in CMake. When that option is enabled, libc++ will
assume that the PSTL can be found somewhere on the CMake module path,
and it will provide the C++17 parallel algorithms based on the PSTL
(that is assumed to be available).
The commit also adds support for running the PSTL tests as part of
the libc++ test suite.
Reviewers: rodgert, EricWF
Subscribers: mgorny, christof, jkorous, dexonsmith, libcxx-commits, mclow.lists, EricWF
Tags: #libc
Differential Revision: https://reviews.llvm.org/D60480
llvm-svn: 366593
Summary: Filesystem doesn't work on Windows, so we need a mechanism to turn it off for the time being.
Reviewers: ldionne, serge-sans-paille, EricWF
Reviewed By: EricWF
Subscribers: mstorsjo, mgorny, christof, jdoerfert, libcxx-commits
Differential Revision: https://reviews.llvm.org/D59619
llvm-svn: 356633
Summary:
This patch treats <filesystem> as a first-class citizen of the dylib,
like all other sub-libraries (e.g. <chrono>). As such, it also removes
all special handling for installing the filesystem library separately
or disabling part of the test suite from the lit command line.
Unlike the previous attempt (r356500), this doesn't remove all the
filesystem tests.
Reviewers: mclow.lists, EricWF, serge-sans-paille
Subscribers: mgorny, christof, jkorous, dexonsmith, jfb, jdoerfert, libcxx-commits
Differential Revision: https://reviews.llvm.org/D59152
llvm-svn: 356518
When I applied r356500 (https://reviews.llvm.org/D59152), I somehow
deleted all of filesystem's tests. I will revert r356500 and re-apply
it properly.
llvm-svn: 356505
Summary:
This patch treats <filesystem> as a first-class citizen of the dylib,
like all other sub-libraries (e.g. <chrono>). As such, it also removes
all special handling for installing the filesystem library separately
or disabling part of the test suite from the lit command line.
Reviewers: mclow.lists, EricWF, serge-sans-paille
Subscribers: mgorny, christof, jkorous, dexonsmith, jfb, jdoerfert, libcxx-commits
Differential Revision: https://reviews.llvm.org/D59152
llvm-svn: 356500
This patch renames the cxx-benchmark-unittests to check-cxx-benchmarks
and converts the target to use LIT in order to make the tests run faster
and provide better output.
In particular this runs each benchmark in a suite one by one, allowing
more parallelism while ensuring output isn't garbage with multiple threads.
Additionally, it adds the CMake flag '-DLIBCXX_BENCHMARK_TEST_ARGS=<list>'
to specify what options are passed when running the benchmarks.
llvm-svn: 346888
The bots were failing to build the cxx_filesystem target, so the
tests were failing. Though this does lead me to wonder how it
was ever working with c++experimental.
llvm-svn: 338095
Summary:
These flags can be specified using the CMake variables
LIBCXX_TEST_LINKER_FLAGS and LIBCXX_TEST_COMPILER_FLAGS.
When building the tests for CHERI I need to pass additional
flags (such as -mabi=n64 or -mabi=purecap) to the compiler
for our test configurations
Reviewers: EricWF
Reviewed By: EricWF
Subscribers: christof, mgorny, cfe-commits
Differential Revision: https://reviews.llvm.org/D42139
llvm-svn: 325914
AddLLVM is needed for several functions that are used in tests and
as such needs to be included from the right context which previously
wasn't the case.
Differential Revision: https://reviews.llvm.org/D40280
llvm-svn: 319515
After speaking with the libcxx owners, they agreed that this is
a bug in the bot that needs to be fixed by the bot owners, and
the CMake changes are correct.
llvm-svn: 313643
This reverts commit 4ad71811d45268d81b60f27e3b8b2bcbc23bd7b9.
There is a bot that is checking out libcxx and lit with nothing
else and then running lit.py against the test tree. Since there's
no LLVM source tree, there's no LLVM CMake. CMake actually
reports this as a warning saying unsupported libcxx configuration,
but I guess someone is depending on it anyway.
llvm-svn: 313607
In order for IDE's like CLion to correctly parse and highlight the tests
it needs to know roughly how to build them. This patch adds a dummy CMake target
for each/all of the .pass.cpp tests in the test suite to solve this problem.
The target is only created when LIBCXX_CONFIGURE_IDE=ON, so it shouldn't affect
most users.
Originally I wasn't sure that this change deserved to live upstream, but it's
quite frustrating to edit libc++ tests using CLion or Visual Studio without it,
in particular the filesystem tests which rely heavily on macros. Even though the change
should have no effect on non-IDE users/configurations I decided to commit it upstream
with the hopes it will benefit somebody other than me.
llvm-svn: 307118
This patch changes the CMake configuration so that it always
generates the test/lit.site.cfg file, even when testing is disabled.
This allows users to test libc++ without requiring them to have
a full LLVM checkout on their machine.
llvm-svn: 296685
Summary: This patch allows libc++ to be built against the debug MSVC runtimes instead of just the release ones.
Reviewers: rnk, majnemer, compnerd, smeenai
Subscribers: mgorny, cfe-commits
Differential Revision: https://reviews.llvm.org/D28725
llvm-svn: 292006
Summary:
This patch attempts to clean up the macro configuration mess in `<__threading_support>`, specifically the mess involving external threading variants. Additionally this patch adds design documentation for `<__threading_support>` and the configuration macros it uses.
The primary change in this patch is separating the idea of an "external API" provided by `<__external_threading>` and the idea of having an external threading library. Now `_LIBCPP_HAS_THREAD_API_EXTERNAL` means that libc++ should use `<__external_threading>` and that the header is expected to exist. Additionally the new macro `_LIBCPP_HAS_THREAD_LIBRARY_EXTERNAL` is now used to configure for using an "external library" with the default threading API.
Reviewers: compnerd, rmaprath
Subscribers: smeenai, cfe-commits, mgorny
Differential Revision: https://reviews.llvm.org/D28316
llvm-svn: 291275
This patch further decouples libc++ from pthread, allowing libc++ to be built
against other threading systems. There are two main use cases:
- Building libc++ against a thread library other than pthreads.
- Building libc++ with an "external" thread API, allowing a separate library to
provide the implementation of that API.
The two use cases are quite similar, the second one being sligtly more
de-coupled than the first. The cmake option LIBCXX_HAS_EXTERNAL_THREAD_API
enables both kinds of builds. One needs to place an <__external_threading>
header file containing an implementation of the "libc++ thread API" declared
in the <__threading_support> header.
For the second use case, the implementation of the libc++ thread API can
delegate to a custom "external" thread API where the implementation of this
external API is provided in a seperate library. This mechanism allows toolchain
vendors to distribute a build of libc++ with a custom thread-porting-layer API
(which is the "external" API above), platform vendors (recipients of the
toolchain/libc++) are then required to provide their implementation of this API
to be linked with (end-user) C++ programs.
Note that the second use case still requires establishing the basic types that
get passed between the external thread library and the libc++ library
(e.g. __libcpp_mutex_t). These cannot be opaque pointer types (libc++ sources
won't compile otherwise). It should also be noted that the second use case can
have a slight performance penalty; as all the thread constructs need to cross a
library boundary through an additional function call.
When the header <__external_threading> is omitted, libc++ is built with the
"libc++ thread API" (declared in <__threading_support>) as the "external" thread
API (basic types are pthread based). An implementation (pthread based) of this
API is provided in test/support/external_threads.cpp, which is built into a
separate DSO and linked in when running the libc++ test suite. A test run
therefore demonstrates the second use case (less the intermediate custom API).
Differential revision: https://reviews.llvm.org/D21968
Reviewers: bcraig, compnerd, EricWF, mclow.lists
llvm-svn: 281179
Summary:
The point of this patch is to have a consistent convention for naming build, check and install targets so that the targets can be constructed from the project name.
This change renames a bunch of CMake components and targets from libcxx to cxx. For each renamed target I've added a convenience target that matches the old target name and depends on the new target. This will preserve function of the old targets so that the change doesn't break the world. We can evaluate if it is worth removing the extra targets later.
Reviewers: EricWF
Subscribers: cfe-commits
Differential Revision: https://reviews.llvm.org/D23699
llvm-svn: 279675
Summary:
The new LLVM runtimes build directory requires some basic conventions across the runtime projects. These changes make libcxx build under the runtimes subdirectory. The general idea of the changes is that the runtimes subdirectory requires some conventions to be consistent across runtime projects.
I expect to have a few more small patches that build on this to tie up check targets and other things useful in development workflows.
Summary of changes in this patch:
* Renamed variable LLVM_CONFIG -> LLVM_CONFIG_PATH
* Renamed variable LIBCXX_BUILT_STANDALONE -> LIBCXX_STANDALONE_BUILD
* Add an include of AddLLVM in the tests subdirectory for add_lit_testsuite.
Reviewers: EricWF
Subscribers: cfe-commits
Differential Revision: https://reviews.llvm.org/D23696
llvm-svn: 279151
David Zarzycki