This returns "cortex-a73" for second-generation Kryo; not precisely
correct, but close enough.
Differential Revision: https://reviews.llvm.org/D37724
llvm-svn: 313200
-mcpu=# will support:
. generic: the default insn set
. v1: insn set version 1, the same as generic
. v2: insn set version 2, version 1 + additional jmp insns
. probe: the compiler will probe the underlying kernel to
decide proper version of insn set.
We did not not use -mcpu=native since llc/llvm will interpret -mcpu=native
as the underlying hardware architecture regardless of -march value.
Currently, only x86_64 supports -mcpu=probe. Other architecture will
silently revert to "generic".
Also added -mcpu=help to print available cpu parameters.
llvm will print out the information only if there are at least one
cpu and at least one feature. Add an unused dummy feature to
enable the printout.
Examples for usage:
$ llc -march=bpf -mcpu=v1 -filetype=asm t.ll
$ llc -march=bpf -mcpu=v2 -filetype=asm t.ll
$ llc -march=bpf -mcpu=generic -filetype=asm t.ll
$ llc -march=bpf -mcpu=probe -filetype=asm t.ll
$ llc -march=bpf -mcpu=v3 -filetype=asm t.ll
'v3' is not a recognized processor for this target (ignoring processor)
...
$ llc -march=bpf -mcpu=help -filetype=asm t.ll
Available CPUs for this target:
generic - Select the generic processor.
probe - Select the probe processor.
v1 - Select the v1 processor.
v2 - Select the v2 processor.
Available features for this target:
dummy - unused feature.
Use +feature to enable a feature, or -feature to disable it.
For example, llc -mcpu=mycpu -mattr=+feature1,-feature2
...
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
llvm-svn: 311522
This patch improves our guessing of unknown Intel CPUs to support Goldmont and skylake-avx512.
Differential Revision: https://reviews.llvm.org/D35161
llvm-svn: 309246
This patch series adds support for the IBM z14 processor. This part includes:
- Basic support for the new processor and its features.
- Support for new instructions (except vector 32-bit float and 128-bit float).
- CodeGen for new instructions, including new LLVM intrinsics.
- Scheduler description for the new processor.
- Detection of z14 as host processor.
Support for the new 32-bit vector float and 128-bit vector float
instructions is provided by separate patches.
llvm-svn: 308194
We're already using it in 64-bit builds because 64-bit MSVC doesn't support inline assembly.
As far as I know we were using inline assembly because at the time the code was added we had to support MSVC 2008 pre-SP1 while the intrinsic was added to MSVC in SP1. Now that we don't have to support that we should be able to just use the intrinsic.
llvm-svn: 308163
As far as I can tell we can simply distinguish based on features rather than model number. Many of the strings we were previously using are treated the same by the backend.
llvm-svn: 307884
This adds all the feature bits libgcc has. They will soon be added to compiler-rt as well. This adds a second 32 bit feature variable to hold the bits that are needed by getHostCPUName that are not in libgcc. libgcc had already used 31 of the 32 bits in the existing variable and we needed 3 bits so at minimum 2 bits would spill over. I chose to move all 3.
llvm-svn: 307758
These asserts could only occur if we fail to properly detect the compiler, but an assert is not a good way to do that because it doesn't work in release builds.
I wonder if we could use #error?
llvm-svn: 307520
Users of getHostCPUName should also use getHostCPUFeatures which will take care of making sure avx512 is disabled if the CPU doesn't support it. This is consistent with what we do for other CPUs.
llvm-svn: 307495
The CPU name is really just used for scheduler and other microarchitectural optimizations. The feature flags should be determined by getHostCPUFeatures which should always be used with getHostCPUName. Trying to alter CPU name strings to control features just isn't practical.
Most of these types of things were removed from Intel CPUs a while ago.
This is part of my plan to bring compiler-rt's cpu_model.c file up to date with the equivalent functionality in libgcc. A lot of the code in that file is copied from Host.cpp and we want to keep them reasonably in sync.
llvm-svn: 307467
the system's version of macOS
sys::getProcessTriple returns LLVM_HOST_TRIPLE, whose system version might not
be the actual version of the system on which the compiler running. This commit
ensures that, for macOS, sys::getProcessTriple returns a triple with the
system's macOS version.
rdar://33177551
Differential Revision: https://reviews.llvm.org/D34446
llvm-svn: 307372
AVX512_VPOPCNTDQ is a new feature set that was published by Intel.
The patch represents the LLVM side of the addition of two new intrinsic based instructions (vpopcntd and vpopcntq).
Differential Revision: https://reviews.llvm.org/D33169
llvm-svn: 303858
This patch adds support for the the LightWeight Profiling (LWP) instructions which are available on all AMD Bulldozer class CPUs (bdver1 to bdver4).
Reapplied - this time without changing line endings of existing files.
Differential Revision: https://reviews.llvm.org/D32769
llvm-svn: 302041
This patch adds support for the the LightWeight Profiling (LWP) instructions which are available on all AMD Bulldozer class CPUs (bdver1 to bdver4).
Differential Revision: https://reviews.llvm.org/D32769
llvm-svn: 302028
The ErrorOr should not be dereferenced on the error path.
Patch by Jacob Young
Reviewers: tejohnson
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D32032
llvm-svn: 300267
This shares detection logic with ARM(32), since AArch64 capable CPUs may
also run in 32-bit system mode.
We observe weird /proc/cpuinfo output for MSM8992 and MSM8994, where
they report all CPU cores as one single model, depending on which CPU
core the kernel is running on. As a workaround, we hardcode the known
CPU part name for these SoCs.
For big.LITTLE systems, this patch would only return the part name of
the first core (usually the little core). Proper support will be added
in a follow-up change.
Differential Revision: D31675
llvm-svn: 299458
This reverts r299062, which caused build failures on Windows.
It also reverts the attempts to fix the windows builds in r299064 and r299065.
The introduction of namespace llvm::sys::detail makes MSVC, and seemingly also
mingw, complain about ambiguity with the existing namespace llvm::detail.
E.g.:
C:\b\slave\sanitizer-windows\llvm\include\llvm/Support/MathExtras.h(184): error C2872: 'detail': ambiguous symbol
C:\b\slave\sanitizer-windows\llvm\include\llvm/Support/PointerLikeTypeTraits.h(31): note: could be 'llvm::detail'
C:\b\slave\sanitizer-windows\llvm\include\llvm/Support/Host.h(80): note: or 'llvm::sys::detail'
In r299064 and r299065 I tried to fix these ambiguities, based on the errors
reported in the log files. It seems however that the build stops early when
this kind of error is encountered, and many build-then-fix-iterations on
Windows may be needed to fix this. Therefore reverting r299062 for now to
get the build working again on Windows.
llvm-svn: 299066
This refactors getHostCPUName so that for the architectures that get the
host cpu info on linux from /proc/cpuinfo, the /proc/cpuinfo parsing
logic is present in the build, even if it wasn't built on a linux system
for that architecture.
Since the code is present in the build, we can then test that code also
on other systems, i.e. we don't need to have buildbots setup for all
architectures on linux to be able to test this. Instead, developers will
test this as part of the regression test run.
As an example, a few unit tests are added to test getHostCPUName for ARM
running linux. A unit test is preferred over a lit-based test, since the
expectation is that in the future, the functionality here will grow over
what can be tested with "llc -mcpu=native".
This is a preparation step to enable implementing the range of
improvements discussed on PR30516, such as adding AArch64 support,
support for big.LITTLE systems, reducing code duplication.
Differential Revision: https://reviews.llvm.org/D31236
llvm-svn: 299060
We only implemented it for one of the 3 HLE instructions and that instruction is also under the RTM flag. Clang only implements the RTM flag from its command line.
llvm-svn: 294562
This patch does the following.
1. Adds an Intrinsic int_x86_clzero which works with __builtin_ia32_clzero
2. Identifies clzero feature using cpuid info. (Function:8000_0008, Checks if EBX[0]=1)
3. Adds the clzero feature under znver1 architecture.
4. The custom inserter is added in Lowering.
5. A testcase is added to check the intrinsic.
6. The clzero instruction is added to assembler test.
Patch by Ganesh Gopalasubramanian with a couple formatting tweaks, a disassembler test, and using update_llc_test.py from me.
Differential revision: https://reviews.llvm.org/D29385
llvm-svn: 294558
Summary:
This patch enables the following
1. AMD family 17h architecture using "znver1" tune flag (-march, -mcpu).
2. ISAs that are enabled for "znver1" architecture.
3. Checks ADX isa from cpuid to identify "znver1" flag when -march=native is used.
4. ISAs FMA4, XOP are disabled as they are dropped from amdfam17.
5. For the time being, it uses the btver2 scheduler model.
6. Test file is updated to check this flag.
This item is linked to clang review item https://reviews.llvm.org/D28018
Patch by Ganesh Gopalasubramanian
Reviewers: RKSimon, craig.topper
Subscribers: vprasad, RKSimon, ashutosh.nema, llvm-commits
Differential Revision: https://reviews.llvm.org/D28017
llvm-svn: 291543
Summary:
Intel's i5-6300U CPU is reporting to have a model id of 78 (4e).
The Host detection assumes that to be Skylake Xeon (with AVX512 support),
instead of a normal Skylake machine.
Patch by: Valentin Churavy
Reviewers: nalimilan, craig.topper
Subscribers: hfinkel, tkelman, craig.topper, nalimilan, llvm-commits
Differential Revision: https://reviews.llvm.org/D28221
llvm-svn: 291084
This CPU type was not previously recognized by LLVM which led to emitting
poor (and sometimes incorrect) code in some JIT workloads on such a machine.
llvm-svn: 290961
Summary:
For now I have only added support for x86_64 Linux, but other systems
can be added incrementally.
This is to be used for setting the default parallelism for ThinLTO
backends (instead of thread::hardware_concurrency which includes
hyperthreading and is too aggressive). I'll send this as a follow-on
patch, and it will fall back to hardware_concurrency when the new
getHostNumPhysicalCores returns -1 (when not supported for a given
host system).
I also added an interface to MemoryBuffer to force reading a file
as a stream - this is required for /proc/cpuinfo which is a special
file that looks like a normal file but appears to have 0 size.
The existing readers of this file in Host.cpp are reading the first
1024 or so bytes from it, because the necessary info is near the top.
But for the new functionality we need to be able to read the entire
file. I can go back and change the other readers to use the new
getFileAsStream as a follow-on patch since it seems much more robust.
Added a unittest.
Reviewers: mehdi_amini
Subscribers: beanz, mgorny, llvm-commits, modocache
Differential Revision: https://reviews.llvm.org/D25564
llvm-svn: 284138
Summary:
Attempting to fix PR30384.
Take the same approach as in compiler_rt and add a simplified version of __get_cpuid_max.
Including cpuid.h is no longer needed.
Reviewers: echristo, joerg
Subscribers: mehdi_amini, llvm-commits
Differential Revision: https://reviews.llvm.org/D24597
llvm-svn: 283265
Summary:
Mirroring most cleanup changed from compiler-rt/lib/builtins/cpu_model.
x86 methods are still returning a bool.
Reviewers: llvm-commits, echristo, craig.topper, sanjoy
Subscribers: mehdi_amini
Differential Revision: https://reviews.llvm.org/D22480
llvm-svn: 276149
[cpu-detection] [amdfam10] Return barcelona, and amdfam10 for all other
subtypes. Address Bug 28067.
Along with the refactoring of Host.cpp, getHostCPUName() was modified to
return more precise types for CPUs in amdfam10.
However, callers of getHostCPUName() do string matching on type, so this
cannot be modified.
Currently there is support in the x86 backend for barcelona.
For all other subtypes the assumed return value is amdfam10.
Fix: getHostCPUName() returns barcelona subtype and amdfam10 for all
others. This can be extended further when support for the other subtypes
is added.
Differential revision: http://reviews.llvm.org/D21193
llvm-svn: 272333
Eli Friedman