Summary: Unless you were intentionally avoiding this syntax? I saw you mentioned makeArrayRef in your commit that added SplitOpsAndApply.
Reviewers: RKSimon
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D44403
llvm-svn: 327418
This is a follow-up to r327137 where we unified error handling for the
DwarfLinker. This replaces calls to errs() and outs() with the
appropriate ostream wrapper everywhere in dsymutil.
llvm-svn: 327411
This follows recently started direction and sometimes
allows to fully get rid from `echo` calls.
I'll rename changed files to *.test in a follow-up.
llvm-svn: 327410
This is part of fixing the instruction predicates for MIPS.
Reviewers: atanasyan, abeserminji
Differential Revision: https://reviews.llvm.org/D44212
llvm-svn: 327409
This is PR36686.
If a user of a library is LTOed with that library we take the
opportunity to set dso_local, but we don't clear dllimport, which
creates an invalid IR.
llvm-svn: 327408
The goal is to make the latency information accessible through the MCSchedModel
interface. This is particularly important for tools like llvm-mca that only have
access to the MCSchedModel API.
This partially fixes PR36676.
No functional change intended.
Differential Revision: https://reviews.llvm.org/D44383
llvm-svn: 327406
This was supposed to be an NFC refactoring that will eventually allow
eliminating the isFast() predicate, but there's a rare possibility
that we would pessimize the code as shown in the test case because
we failed to check 'hasOneUse()' properly. This version also removes
an inefficiency of the old code; we would look for:
(X * C) * C1 --> X * (C * C1)
...but that pattern is always handled by
SimplifyAssociativeOrCommutative().
llvm-svn: 327404
Summary: This also aligns with the behavior of declarations.
Reviewers: sammccall
Reviewed By: sammccall
Subscribers: klimek, ilya-biryukov, jkorous-apple, ioeric, cfe-commits
Differential Revision: https://reviews.llvm.org/D44423
llvm-svn: 327401
This patch makes dsymutil perform analyzeContextInfo and CloneDIEs in
parallel. For the same object file, there is a dependency between the
two. However, we can do analyzeContextInfo for the next object file
while cloning DIEs for the current. This is exactly the approach taken
in this patch.
For WebCore, this leads to a performance improvement of 29% and for
clang we see similar results with at 32% improvement.
A big thanks to Pete Cooper who came up with the original idea and
the PoC.
Differential revision: https://reviews.llvm.org/D43945
llvm-svn: 327399
Summary:
This change is part of step five in the series of changes to remove alignment argument from
memcpy/memmove/memset in favour of alignment attributes. In particular, this changes the
SROA pass to cease using the old getAlignment() & setAlignment() APIs of MemoryIntrinsic in
favour of getting source & dest specific alignments through the new API. This allows us
to enhance visitMemTransferInst to be more aggressive setting the alignment in memcpy
calls that it creates, as well as to only change the alignment of a memcpy/memmove
argument that it replaces.
Steps:
Step 1) Remove alignment parameter and create alignment parameter attributes for
memcpy/memmove/memset. ( rL322965, rC322964, rL322963 )
Step 2) Expand the IRBuilder API to allow creation of memcpy/memmove with differing
source and dest alignments. ( rL323597 )
Step 3) Update Clang to use the new IRBuilder API. ( rC323617 )
Step 4) Update Polly to use the new IRBuilder API. ( rL323618 )
Step 5) Update LLVM passes that create memcpy/memmove calls to use the new IRBuilder API,
and those that use use MemIntrinsicInst::[get|set]Alignment() to use [get|set]DestAlignment()
and [get|set]SourceAlignment() instead. ( rL323886, rL323891, rL324148, rL324273, rL324278,
rL324384, rL324395, rL324402, rL324626, rL324642, rL324653, rL324654, rL324773, rL324774,
rL324781, rL324784, rL324955, rL324960, rL325816 )
Step 6) Remove the single-alignment IRBuilder API for memcpy/memmove, and the
MemIntrinsicInst::[get|set]Alignment() methods.
Reference
http://lists.llvm.org/pipermail/llvm-dev/2015-August/089384.htmlhttp://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20151109/312083.html
Reviewers: chandlerc, bollu, efriedma
Reviewed By: efriedma
Subscribers: efriedma, eraman, llvm-commits
Differential Revision: https://reviews.llvm.org/D42974
llvm-svn: 327398
Codeview references to unnamed structs and unions are expected to refer to the
complete type definition instead of a forward reference so Visual Studio can
resolve the type properly.
Differential Revision: https://reviews.llvm.org/D32498
llvm-svn: 327397
Previously, Config->Demangle was uninitialised (not hooked up to
commandline handling)
Differential Revision: https://reviews.llvm.org/D44301
llvm-svn: 327390
Summary: This is a first step towards making the pipeline configurable.
Subscribers: llvm-commits, andreadb
Differential Revision: https://reviews.llvm.org/D44309
llvm-svn: 327389
For the MIPS O32 ABI, the current call lowering logic naively lowers each
call, creating the reserved argument area to hold the argument spill areas for
$a0..$a3 and the outgoing parameter area if one is required at each call site.
In the case of a sufficently large byval argument, a call to memcpy is used
to write the start+16..end of the argument into the outgoing parameter area.
This is done within the CALLSEQ_START..CALLSEQ_END of the callee. The CALLSEQ
nodes are responsible for performing the necessary stack adjustments.
Since the O32/N32/N64 MIPS ABIs do not have a red-zone and writing below the
stack pointer and reading the values back is unpredictable, the call to memcpy
cannot be hoisted out of the callee's CALLSEQ nodes.
However, for the O32 ABI requires the reserved argument area for functions
which have parameters. The naive lowering of calls will then create nested
CALLSEQ sequences. For N32 and N64 these nodes are also created, but with
zero stack adjustments as those ABIs do not have a reserved argument area.
This patch addresses the correctness issue by recognizing the special case
of lowering a byval argument that uses memcpy. By recognizing that the
incoming chain already has a CALLSEQ_START node on it when calling memcpy,
the CALLSEQ nodes are not created. For the N32 and N64 ABIs, this is not an
issue, as no stack adjustment has to be performed.
For the O32 ABI, the correctness reasoning is different. In the case of a
sufficently large byval argument, registers a0..a3 are going to be used for
the callee's arguments, mandating the creation of the reserved argument area.
The call to memcpy in the naive case will also create its own reserved
argument area. However, since the reserved argument area consists of undefined
values, both calls can use the same reserved argument area.
Reviewers: abeserminji, atanasyan
Differential Revision: https://reviews.llvm.org/D44296
llvm-svn: 327388
Summary:
DeclrationAndMacrosFinder will find some declarations (not macro!) that are
referened inside the macro somehow, isSearchedLocation() is not sufficient, we
don't know whether the searched source location is macro or not.
Reviewers: ilya-biryukov
Subscribers: klimek, jkorous-apple, ioeric, cfe-commits
Differential Revision: https://reviews.llvm.org/D44293
llvm-svn: 327387
clang-3.8 complains that constructor for '...' must explicitly
initialize the const object. Newer clangs and gcc seem to be fine with
this, but explicitly initializing the variable does not hurt.
llvm-svn: 327383
This patch introduces the LinkContext which is necessary to have
dsymutil perform analysis and cloning of DIEs in parallel. As requested
in D43945, I'm landing this as two separate commits.
llvm-svn: 327382
clang-3.8 complains that constructor for '...' must explicitly
initialize the const member. Newer clangs and gcc seem to be fine with
this, but explicitly initializing the member does not hurt.
llvm-svn: 327380
This finishes PR35877.
INSERT BEFORE used similar to INSERT AFTER,
it inserts sections before the given target section.
Differential revision: https://reviews.llvm.org/D44380
llvm-svn: 327378
This is part of PR36515.
With some linkerscripts it is possible to get file offset overlaps
and overflows. Currently LLD checks overlaps in checkNoOverlappingSections().
And also we allow broken output with --no-inhibit-exec.
Problem is that sometimes final offset of sections is completely broken
and we calculate output file size wrong and might crash.
Patch implements check to verify that there is no output section
which offset exceeds file size.
Differential revision: https://reviews.llvm.org/D43819
llvm-svn: 327376
splitMergedValStore will split a store into two if target prefers this, or if
-force-split-store is passed.
This patch adds the missing handling for endianness in this function along
with a test case.
Review: Eli Friedman
https://reviews.llvm.org/D44396
llvm-svn: 327375
This fixes PR36598.
LLD currently crashes when we have empty output section
with SHF_LINK_ORDER flag. This might happen if we place an
empty synthetic section in the linker script, but keep output
section alive with the use of additional symbol, for example.
The patch fixes the issue by dropping all special flags
for empty sections.
Differential revision: https://reviews.llvm.org/D44376
llvm-svn: 327374
isAvailableAtLoopEntry duplicates logic of `properlyDominates` after checking invariance.
This patch replaces this logic with invocation of this method which is more profitable
because it supports caching.
Differential Revision: https://reviews.llvm.org/D43997
llvm-svn: 327373
Add more debug information for peephole optimization passes.
These would only be enabled for debug version binary and could help
analyzing why some optimization opportunities were missed.
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
llvm-svn: 327371
This new pass eliminate identical move:
MOV rA, rA
This is particularly possible to happen when sub-register support
enabled. The special type cast insn MOV_32_64 involves different
register class on src (i32) and dst (i64), RA could generate useless
instruction due to this.
This pass also could serve as the bast for further post-RA optimization.
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
llvm-svn: 327370
George Rimar