This resolves a README entry and technically resolves PR4916,
but we still get poor code for the testcase in that PR because
GVN isn't CSE'ing uadd with add, filed as PR8817.
Previously we got:
_test7: ## @test7
addq %rsi, %rdi
cmpq %rdi, %rsi
movl $42, %eax
cmovaq %rsi, %rax
ret
Now we get:
_test7: ## @test7
addq %rsi, %rdi
movl $42, %eax
cmovbq %rsi, %rax
ret
llvm-svn: 122182
sadd formed is half the size of the original type. We can
now compile this into a sadd.i8:
unsigned char X(char a, char b) {
int res = a+b;
if ((unsigned )(res+128) > 255U)
abort();
return res;
}
llvm-svn: 122178
checking to see if the high bits of the original add result were dead.
Inserting a smaller add and zexting back to that size is not good enough.
This is likely to be the fix for 8816.
llvm-svn: 122177
which have trapping constant exprs in them due to PHI nodes.
Eliminating them can cause the constant expr to be evalutated
on new paths if the input edges are critical.
llvm-svn: 122164
It turns out that ppc backend has really weird interdependencies
over different hooks and all stuff is fragile wrt small changes.
This should fix PR8749
llvm-svn: 122155
may be called. If the entry block is empty, the insertion point iterator will be
the "end()" value. Calling ->getParent() on it (among others) causes problems.
Modify materializeFrameBaseRegister to take the machine basic block and insert
the frame base register at the beginning of that block. (It's very similar to
what the code does all ready. The only difference is that it will always insert
at the beginning of the entry block instead of after a previous materialization
of the frame base register. I doubt that that matters here.)
<rdar://problem/8782198>
llvm-svn: 122104
BUILD_VECTOR operands where the element type is not legal. I had previously
changed this code to insert TRUNCATE operations, but that was just wrong.
llvm-svn: 122102
on the DragonEgg self-host bot. Unfortunately, the testcase is pretty messy and doesn't reduce well due to
interactions with other parts of InstCombine.
llvm-svn: 122072
a null endptr argument, because they may write to errno.
This fixes a seflhost miscompile observed on Linux targets when TBAA
was enabled.
llvm-svn: 122014
dragonegg self-host buildbot. Original commit message:
Add an InstCombine transform to recognize instances of manual overflow-safe addition
(performing the addition in a wider type and explicitly checking for overflow), and
fold them down to intrinsics. This currently only supports signed-addition, but could
be generalized if someone works out the magic constant formulas for other operations.
llvm-svn: 121965
(performing the addition in a wider type and explicitly checking for overflow), and
fold them down to intrinsics. This currently only supports signed-addition, but could
be generalized if someone works out the magic constant formulas for other operations.
Fixes <rdar://problem/8558713>.
llvm-svn: 121905
and "save_volatiles" correctly. This completes the custom calling convention
functionality changes for the MBlaze backend that were started in 121888.
llvm-svn: 121891
When it sees a promising select it now tries to figure out whether the condition of the select is known in any of the predecessors and if so it maps the operands appropriately.
llvm-svn: 121859
With this we don't need the EffectiveSize field anymore. Without that field
LayoutFragment only updates offsets and we don't need to invalidate the
current fragment when it is relaxed (only the ones following it).
This is also a very small improvement in the accuracy of the layout info as
we now use the after relaxation size immediately.
llvm-svn: 121857
regB = move RCX
regA = op regB, regC
RAX = move regA
where both regB and regC are killed. If regB is constrainted to non-compatible
physical registers but regC is not constrainted at all, then it's better to
commute the instruction.
movl %edi, %eax
shlq $32, %rcx
leaq (%rcx,%rax), %rax
=>
movl %edi, %eax
shlq $32, %rcx
orq %rcx, %rax
rdar://8762995
llvm-svn: 121793
which is simpler than finding a place to insert in BB.
- Don't perform the 'if condition hoisting' xform on certain
i1 PHIs, as it interferes with switch formation.
This re-fixes "example 7", without breaking the world hopefully.
llvm-svn: 121764
first, it can kick in on blocks whose conditions have been
folded to a constant, even though one of the edges will be
trivially folded.
second, it doesn't clean up the "if diamond" that it just
eliminated away. This is a problem because other simplifycfg
xforms kick in depending on the order of block visitation,
causing pointless work.
llvm-svn: 121762
Use the same COPY_TO_REGCLASS approach as for the 2-register *_sfp instructions.
This change made a big difference in the code generated for the
CodeGen/Thumb2/cross-rc-coalescing-2.ll test: The coalescer is still doing
a fine job, but some instructions that were previously moved outside the loop
are not moved now. It's using fewer VFP registers now, which is generally
a good thing, so I think the estimates for register pressure changed and that
affected the LICM behavior. Since that isn't obviously wrong, I've just
changed the test file. This completes the work for Radar 8711675.
llvm-svn: 121730
when the wider type is legal. This allows us to compile:
define zeroext i16 @test1(i16 zeroext %x) nounwind {
entry:
%div = udiv i16 %x, 33
ret i16 %div
}
into:
test1: # @test1
movzwl 4(%esp), %eax
imull $63551, %eax, %eax # imm = 0xF83F
shrl $21, %eax
ret
instead of:
test1: # @test1
movw $-1985, %ax # imm = 0xFFFFFFFFFFFFF83F
mulw 4(%esp)
andl $65504, %edx # imm = 0xFFE0
movl %edx, %eax
shrl $5, %eax
ret
Implementing rdar://8760399 and example #4 from:
http://blog.regehr.org/archives/320
We should implement the same thing for [su]mul_hilo, but I don't
have immediate plans to do this.
llvm-svn: 121696
when simplifying, allowing them to be eagerly turned into switches. This
is the last step required to get "Example 7" from this blog post:
http://blog.regehr.org/archives/320
On X86, we now generate this machine code, which (to my eye) seems better
than the ICC generated code:
_crud: ## @crud
## BB#0: ## %entry
cmpb $33, %dil
jb LBB0_4
## BB#1: ## %switch.early.test
addb $-34, %dil
cmpb $58, %dil
ja LBB0_3
## BB#2: ## %switch.early.test
movzbl %dil, %eax
movabsq $288230376537592865, %rcx ## imm = 0x400000017001421
btq %rax, %rcx
jb LBB0_4
LBB0_3: ## %lor.rhs
xorl %eax, %eax
ret
LBB0_4: ## %lor.end
movl $1, %eax
ret
llvm-svn: 121690
class A<bit a, bits<3> x, bits<3> y> {
bits<3> z;
let z = !if(a, x, y);
}
The variable z will get the value of x when 'a' is 1 and 'y' when a is '0'.
llvm-svn: 121666
(x & 2^n) ? 2^m+C : C
we can offset both arms by C to get the "(x & 2^n) ? 2^m : 0" form, optimize the
select to a shift and apply the offset afterwards.
llvm-svn: 121609
Alignments smaller than the total size of the memory being loaded or stored,
unless the alignment is 8 bytes, are not allowed. Add tests for this, too.
llvm-svn: 121506
the condition codes. Where the ones that do have an 's' suffix and the ones
that don't don't have the suffix. The trick is if MatchInstructionImpl() fails
we try again after adding a CCOut operand with the correct value and removing
the 's' if present. Four simple test cases added for now, lots more to come.
llvm-svn: 121401
the output to the correct register. Fixes a hidden problem uncovered
by the last patch where we'd try to DAG combine our MVT::Other node
oddly.
llvm-svn: 121358
Added test to check bl __aeabi_read_tp gets emitted properly for ELF/ASM
as well as ELF/OBJ (including fixup)
Also added support for ELF::R_ARM_TLS_IE32
llvm-svn: 121312
vpush instructions to save / restore VFP / NEON registers like this:
vpush {d8,d10,d11}
vpop {d8,d10,d11}
vpush and vpop do not allow gaps in the register list.
rdar://8728956
llvm-svn: 121197
(if available) as we go so that we get simple constantexprs not insane ones.
This fixes the failure of clang/test/CodeGenCXX/virtual-base-ctor.cpp
that the previous iteration of this patch had.
llvm-svn: 121111
memcpy's like:
memcpy(A, B)
memcpy(A, C)
we cannot delete the first memcpy as dead if A and C might be aliases.
If so, we actually get:
memcpy(A, B)
memcpy(A, A)
which is not correct to transform into:
memcpy(A, A)
This patch was heavily influenced by Jakub Staszak's patch in PR8728, thanks
Jakub!
llvm-svn: 120974
difficult on current ARM implementations for a few reasons.
1. Even though a single vmla has latency that is one cycle shorter than a pair
of vmul + vadd, a RAW hazard during the first (4? on Cortex-a8) can cause
additional pipeline stall. So it's frequently better to single codegen
vmul + vadd.
2. A vmla folowed by a vmul, vmadd, or vsub causes the second fp instruction to
stall for 4 cycles. We need to schedule them apart.
3. A vmla followed vmla is a special case. Obvious issuing back to back RAW
vmla + vmla is very bad. But this isn't ideal either:
vmul
vadd
vmla
Instead, we want to expand the second vmla:
vmla
vmul
vadd
Even with the 4 cycle vmul stall, the second sequence is still 2 cycles
faster.
Up to now, isel simply avoid codegen'ing fp vmla / vmls. This works well enough
but it isn't the optimial solution. This patch attempts to make it possible to
use vmla / vmls in cases where it is profitable.
A. Add missing isel predicates which cause vmla to be codegen'ed.
B. Make sure the fmul in (fadd (fmul)) has a single use. We don't want to
compute a fmul and a fmla.
C. Add additional isel checks for vmla, avoid cases where vmla is feeding into
fp instructions (except for the #3 exceptional case).
D. Add ARM hazard recognizer to model the vmla / vmls hazards.
E. Add a special pre-regalloc case to expand vmla / vmls when it's likely the
vmla / vmls will trigger one of the special hazards.
Work in progress, only A+B are enabled.
llvm-svn: 120960
Also add asserts that the indices are valid in InsertValueInst::init(). ExtractValueInst already asserts when constructed with invalid indices.
llvm-svn: 120956
result. This allows us to compile:
void *test12(long count) {
return new int[count];
}
into:
test12:
movl $4, %ecx
movq %rdi, %rax
mulq %rcx
movq $-1, %rdi
cmovnoq %rax, %rdi
jmp __Znam ## TAILCALL
instead of:
test12:
movl $4, %ecx
movq %rdi, %rax
mulq %rcx
seto %cl
testb %cl, %cl
movq $-1, %rdi
cmoveq %rax, %rdi
jmp __Znam
Of course it would be even better if the regalloc inverted the cmov to 'cmovoq',
which would eliminate the need for the 'movq %rdi, %rax'.
llvm-svn: 120936
backend that they were all implemented except umul. This one fell back
to the default implementation that did a hi/lo multiply and compared the
top. Fix this to check the overflow flag that the 'mul' instruction
sets, so we can avoid an explicit test. Now we compile:
void *func(long count) {
return new int[count];
}
into:
__Z4funcl: ## @_Z4funcl
movl $4, %ecx ## encoding: [0xb9,0x04,0x00,0x00,0x00]
movq %rdi, %rax ## encoding: [0x48,0x89,0xf8]
mulq %rcx ## encoding: [0x48,0xf7,0xe1]
seto %cl ## encoding: [0x0f,0x90,0xc1]
testb %cl, %cl ## encoding: [0x84,0xc9]
movq $-1, %rdi ## encoding: [0x48,0xc7,0xc7,0xff,0xff,0xff,0xff]
cmoveq %rax, %rdi ## encoding: [0x48,0x0f,0x44,0xf8]
jmp __Znam ## TAILCALL
instead of:
__Z4funcl: ## @_Z4funcl
movl $4, %ecx ## encoding: [0xb9,0x04,0x00,0x00,0x00]
movq %rdi, %rax ## encoding: [0x48,0x89,0xf8]
mulq %rcx ## encoding: [0x48,0xf7,0xe1]
testq %rdx, %rdx ## encoding: [0x48,0x85,0xd2]
movq $-1, %rdi ## encoding: [0x48,0xc7,0xc7,0xff,0xff,0xff,0xff]
cmoveq %rax, %rdi ## encoding: [0x48,0x0f,0x44,0xf8]
jmp __Znam ## TAILCALL
Other than the silly seto+test, this is using the o bit directly, so it's going in the right
direction.
llvm-svn: 120935
Mon P Wang