This bit is needed in order for the CalleeSavedRegs list to automatically
include the super registers if all of their subregs are present.
Thanks to Wei Mi for initially indicating this deficiency in the SystemZ
backend.
Review: Ulrich Weigand.
https://bugs.llvm.org/show_bug.cgi?id=34550
llvm-svn: 313023
The idea of this patch is to continue the scheduler state over an MBB boundary
in the case where the successor block has only one predecessor. This means
that the scheduler will continue in the successor block (after emitting any
branch instructions) with e.g. maintained processor resource counters.
Benchmarks have been confirmed to benefit from this.
The algorithm in MachineScheduler.cpp that extracts scheduling regions of an
MBB has been extended so that the strategy may optionally reverse the order
of processing the regions themselves. This is controlled by a new method
doMBBSchedRegionsTopDown(), which defaults to false.
Handling the top-most region of an MBB first also means that a top-down
scheduler can continue the scheduler state across any scheduling boundary
between to regions inside MBB.
Review: Ulrich Weigand, Matthias Braun, Andy Trick.
https://reviews.llvm.org/D35053
llvm-svn: 311072
The liveness-tracking code assumes that the registers that were saved
in the function's prolog are live outside of the function. Specifically,
that registers that were saved are also live-on-exit from the function.
This isn't always the case as illustrated by the LR register on ARM.
Differential Revision: https://reviews.llvm.org/D36160
llvm-svn: 310619
isLegalAddressingMode() has recently gained the extra optional Instruction*
parameter, and therefore it can now do the job that previously only
isFoldableMemAccess() could do.
The SystemZ implementation of isLegalAddressingMode() has gained the
functionality of checking for offsets, which used to be done with
isFoldableMemAccess().
The isFoldableMemAccess() hook has been removed everywhere.
Review: Quentin Colombet, Ulrich Weigand
https://reviews.llvm.org/D35933
llvm-svn: 310463
This adds support for the main 128-bit atomic operations,
using the SystemZ instructions LPQ, STPQ, and CDSG.
Generating these instructions is a bit more complex than usual
since the i128 type is not legal for the back-end. Therefore,
we have to hook the LowerOperationWrapper and ReplaceNodeResults
TargetLowering callbacks.
llvm-svn: 310094
We currently emit a serialization operation (bcr 14, 0) before every
atomic load and after every atomic store. This is overly conservative.
The SystemZ architecture actually does not require any serialization
for atomic loads, and a serialization after an atomic store only if
we need to enforce sequential consistency. This is what other compilers
for the platform implement as well.
llvm-svn: 310093
IMHO it is an antipattern to have a enum value that is Default.
At any given piece of code it is not clear if we have to handle
Default or if has already been mapped to a concrete value. In this
case in particular, only the target can do the mapping and it is nice
to make sure it is always done.
This deletes the two default enum values of CodeModel and uses an
explicit Optional<CodeModel> when it is possible that it is
unspecified.
llvm-svn: 309911
This patch makes LSR generate better code for SystemZ in the cases of memory
intrinsics, Load->Store pairs or comparison of immediate with memory.
In order to achieve this, the following common code changes were made:
* New TTI hook: LSRWithInstrQueries(), which defaults to false. Controls if
LSR should do instruction-based addressing evaluations by calling
isLegalAddressingMode() with the Instruction pointers.
* In LoopStrengthReduce: handle address operands of memset, memmove and memcpy
as address uses, and call isFoldableMemAccessOffset() for any LSRUse::Address,
not just loads or stores.
SystemZ changes:
* isLSRCostLess() implemented with Insns first, and without ImmCost.
* New function supportedAddressingMode() that is a helper for TTI methods
looking at Instructions passed via pointers.
Review: Ulrich Weigand, Quentin Colombet
https://reviews.llvm.org/D35262https://reviews.llvm.org/D35049
llvm-svn: 308729
This adds support for the new 128-bit vector float instructions of z14.
Note that these instructions actually only operate on the f128 type,
since only each 128-bit vector register can hold only one 128-bit
float value. However, this is still preferable to the legacy 128-bit
float instructions, since those operate on pairs of floating-point
registers (so we can hold at most 8 values in registers), while the
new instructions use single vector registers (so we hold up to 32
value in registers).
Adding support includes:
- Enabling the instructions for the assembler/disassembler.
- CodeGen for the instructions. This includes allocating the f128
type now to the VR128BitRegClass instead of FP128BitRegClass.
- Scheduler description support for the instructions.
Note that for a small number of operations, we have no new vector
instructions (like integer <-> 128-bit float conversions), and so
we use the legacy instruction and then reformat the operand
(i.e. copy between a pair of floating-point registers and a
vector register).
llvm-svn: 308196
This adds support for the new 32-bit vector float instructions of z14.
This includes:
- Enabling the instructions for the assembler/disassembler.
- CodeGen for the instructions, including new LLVM intrinsics.
- Scheduler description support for the instructions.
- Update to the vector cost function calculations.
In general, CodeGen support for the new v4f32 instructions closely
matches support for the existing v2f64 instructions.
llvm-svn: 308195
This patch series adds support for the IBM z14 processor. This part includes:
- Basic support for the new processor and its features.
- Support for new instructions (except vector 32-bit float and 128-bit float).
- CodeGen for new instructions, including new LLVM intrinsics.
- Scheduler description for the new processor.
- Detection of z14 as host processor.
Support for the new 32-bit vector float and 128-bit vector float
instructions is provided by separate patches.
llvm-svn: 308194
The issue is not if the value is pcrel. It is whether we have a
relocation or not.
If we have a relocation, the static linker will select the upper
bits. If we don't have a relocation, we have to do it.
llvm-svn: 307730
OpenCL 2.0 introduces the notion of memory scopes in atomic operations to
global and local memory. These scopes restrict how synchronization is
achieved, which can result in improved performance.
This change extends existing notion of synchronization scopes in LLVM to
support arbitrary scopes expressed as target-specific strings, in addition to
the already defined scopes (single thread, system).
The LLVM IR and MIR syntax for expressing synchronization scopes has changed
to use *syncscope("<scope>")*, where <scope> can be "singlethread" (this
replaces *singlethread* keyword), or a target-specific name. As before, if
the scope is not specified, it defaults to CrossThread/System scope.
Implementation details:
- Mapping from synchronization scope name/string to synchronization scope id
is stored in LLVM context;
- CrossThread/System and SingleThread scopes are pre-defined to efficiently
check for known scopes without comparing strings;
- Synchronization scope names are stored in SYNC_SCOPE_NAMES_BLOCK in
the bitcode.
Differential Revision: https://reviews.llvm.org/D21723
llvm-svn: 307722
Several integer multiply/divide instructions require use of a
register pair as input and output. This patch moves setting
up the input register pair from C++ code to TableGen, simplifying
the whole process and making it more easily extensible.
No functional change.
llvm-svn: 307155
Fixes a couple of whitespace errors, re-sorts the vector floating-point
instructions to make them more easily extensible, and adds a missing
pseudo instruction.
No functional change.
llvm-svn: 307154
This adds all remaining instructions that were still missing, mostly
privileged and semi-privileged system-level instructions. These are
provided for use with the assembler and disassembler only.
This brings the LLVM assembler / disassembler to parity with the
GNU binutils tools.
llvm-svn: 306876
There are a few instructions provided by the high-word facility (z196)
that we cannot easily exploit for code generation. This patch at least
adds those missing instructions for the assembler and disassembler.
This means that now all nonprivileged instructions up to z13 are
supported by the LLVM assembler / disassembler.
llvm-svn: 306821
We sometimes need emergency spill slots for the register scavenger.
This may be the case when code needs to access a stack slot that
has an offset of 4096 or more relative to the stack pointer.
To make that determination, processFunctionBeforeFrameFinalized
currently simply checks the total stack frame size of the current
function. But this is not enough, since code may need to access
stack slots in the caller's stack frame as well, in particular
incoming arguments stored on the stack.
This commit fixes the problem by taking argument slots into account.
llvm-svn: 306305
Csmith discovered that this function can be called with a zero argument,
in which case an assert for this triggered.
This patch also adds a guard before the other call to this function since
it was missing, although the test only covers the case where it was
discovered.
Reduced test case attached as CodeGen/SystemZ/int-cmp-54.ll.
Review: Ulrich Weigand
llvm-svn: 306287
processFixupValue is called on every relaxation iteration. applyFixup
is only called once at the very end. applyFixup is then the correct
place to do last minute changes and value checks.
While here, do proper range checks again for fixup_arm_thumb_bl. We
used to do it, but dropped because of thumb2. We now do it again, but
use the thumb2 range.
llvm-svn: 306177
This reverts the use of TargetLowering::prepareVolatileOrAtomicLoad
introduced by r196905. Nothing in the semantics of the "volatile"
keyword or the definition of the z/Architecture actually requires
that volatile loads are preceded by a serialization operation, and
no other compiler on the platform actually implements this.
Since we've now seen a use case where this additional serialization
causes noticable performance degradation, this patch removes it.
The patch still leaves in the serialization before atomic loads,
which is now implemented directly in lowerATOMIC_LOAD. (This also
seems overkill, but that can be addressed separately.)
llvm-svn: 306117
The isBarrier/isTerminator flags have been removed from the SystemZ trap
instructions, so that tests do not fail with EXPENSIVE_CHECKS. This was just
an issue at -O0 and did not affect code output on benchmarks.
(Like Eli pointed out: "targets are split over whether they consider their
"trap" a terminator; x86, AArch64, and NVPTX don't, but ARM, MIPS, PPC, and
SystemZ do. We should probably try to be consistent here.". This is still the
case, although SystemZ has switched sides).
SystemZ now returns true in isMachineVerifierClean() :-)
These Generic tests have been modified so that they can be run with or without
EXPENSIVE_CHECKS: CodeGen/Generic/llc-start-stop.ll and
CodeGen/Generic/print-machineinstrs.ll
Review: Ulrich Weigand, Simon Pilgrim, Eli Friedman
https://bugs.llvm.org/show_bug.cgi?id=33047https://reviews.llvm.org/D34143
llvm-svn: 306106
Summary: The method TargetTransformInfo::getRegisterBitWidth() is declared const, but the type erasing implementation classes (TargetTransformInfo::Concept & TargetTransformInfo::Model) that were introduced by Chandler in https://reviews.llvm.org/D7293 do not have the method declared const. This is an NFC to tidy up the const consistency between TTI and its implementation.
Reviewers: chandlerc, rnk, reames
Reviewed By: reames
Subscribers: reames, jfb, arsenm, dschuff, nemanjai, nhaehnle, javed.absar, sbc100, jgravelle-google, llvm-commits
Differential Revision: https://reviews.llvm.org/D33903
llvm-svn: 305189
This creates a new library called BinaryFormat that has all of
the headers from llvm/Support containing structure and layout
definitions for various types of binary formats like dwarf, coff,
elf, etc as well as the code for identifying a file from its
magic.
Differential Revision: https://reviews.llvm.org/D33843
llvm-svn: 304864
I did this a long time ago with a janky python script, but now
clang-format has built-in support for this. I fed clang-format every
line with a #include and let it re-sort things according to the precise
LLVM rules for include ordering baked into clang-format these days.
I've reverted a number of files where the results of sorting includes
isn't healthy. Either places where we have legacy code relying on
particular include ordering (where possible, I'll fix these separately)
or where we have particular formatting around #include lines that
I didn't want to disturb in this patch.
This patch is *entirely* mechanical. If you get merge conflicts or
anything, just ignore the changes in this patch and run clang-format
over your #include lines in the files.
Sorry for any noise here, but it is important to keep these things
stable. I was seeing an increasing number of patches with irrelevant
re-ordering of #include lines because clang-format was used. This patch
at least isolates that churn, makes it easy to skip when resolving
conflicts, and gets us to a clean baseline (again).
llvm-svn: 304787
This adds a callback to the LLVMTargetMachine that lets target indicate
that they do not pass the machine verifier checks in all cases yet.
This is intended to be a temporary measure while the targets are fixed
allowing us to enable the machine verifier by default with
EXPENSIVE_CHECKS enabled!
Differential Revision: https://reviews.llvm.org/D33696
llvm-svn: 304320
TargetPassConfig is not useful for targets that do not use the CodeGen
library, so we may just as well store a pointer to an
LLVMTargetMachine instead of just to a TargetMachine.
While at it, also change the constructor to take a reference instead of a
pointer as the TM must not be nullptr.
llvm-svn: 304247
This adds assembler / disassembler support for the decimal
floating-point instructions. Since LLVM does not yet have
support for decimal float types, these cannot be used for
codegen at this point.
llvm-svn: 304203
This adds assembler / disassembler support for the hexadecimal
floating-point instructions. Since the Linux ABI does not use
any hex float data types, these are not useful for codegen.
llvm-svn: 304202
Use VLREP when inserting one or more loads into a vector. This is more
efficient than to first load and then use a VLVGP.
Review: Ulrich Weigand
llvm-svn: 304152
The loop vectorizer usually vectorizes any instruction it can and then
extracts the elements for a scalarized use. On SystemZ, all elements
containing addresses must be extracted into address registers (GRs). Since
this extraction is not free, it is better to have the address in a suitable
register to begin with. By forcing address arithmetic instructions and loads
of addresses to be scalar after vectorization, two benefits result:
* No need to extract the register
* LSR optimizations trigger (LSR isn't handling vector addresses currently)
Benchmarking show improvements on SystemZ with this new behaviour.
Any other target could try this by returning false in the new hook
prefersVectorizedAddressing().
Review: Renato Golin, Elena Demikhovsky, Ulrich Weigand
https://reviews.llvm.org/D32422
llvm-svn: 303744
EXPENSIVE_CHECKS found this bug (https://bugs.llvm.org/show_bug.cgi?id=33047), which
this patch fixes. The EAR instruction defines a GR32, not a GR64.
Review: Ulrich Weigand
llvm-svn: 303743
This adds a few missing instructions for the assembler and
disassembler. Those should be the last missing general-
purpose (Chapter 7) instructions for the z10 ISA.
llvm-svn: 302667
This adds the remaining general arithmetic instructions
for assembler / disassembler use. Most of these are not
useful for codegen; a few might be, and those are listed
in the README.txt for future improvements.
llvm-svn: 302665
This method must return a valid register class, or the list-ilp isel
scheduler will crash. For MVT::Untyped nullptr was previously returned, but
now ADDR128BitRegClass is returned instead. This is needed just as long as
list-ilp (and probably also list-hybrid) is still there.
Review: Ulrich Weigand, A Trick
https://reviews.llvm.org/D32802
llvm-svn: 302649
Using arguments with attribute inalloca creates problems for verification
of machine representation. This attribute instructs the backend that the
argument is prepared in stack prior to CALLSEQ_START..CALLSEQ_END
sequence (see http://llvm.org/docs/InAlloca.htm for details). Frame size
stored in CALLSEQ_START in this case does not count the size of this
argument. However CALLSEQ_END still keeps total frame size, as caller can
be responsible for cleanup of entire frame. So CALLSEQ_START and
CALLSEQ_END keep different frame size and the difference is treated by
MachineVerifier as stack error. Currently there is no way to distinguish
this case from actual errors.
This patch adds additional argument to CALLSEQ_START and its
target-specific counterparts to keep size of stack that is set up prior to
the call frame sequence. This argument allows MachineVerifier to calculate
actual frame size associated with frame setup instruction and correctly
process the case of inalloca arguments.
The changes made by the patch are:
- Frame setup instructions get the second mandatory argument. It
affects all targets that use frame pseudo instructions and touched many
files although the changes are uniform.
- Access to frame properties are implemented using special instructions
rather than calls getOperand(N).getImm(). For X86 and ARM such
replacement was made previously.
- Changes that reflect appearance of additional argument of frame setup
instruction. These involve proper instruction initialization and
methods that access instruction arguments.
- MachineVerifier retrieves frame size using method, which reports sum of
frame parts initialized inside frame instruction pair and outside it.
The patch implements approach proposed by Quentin Colombet in
https://bugs.llvm.org/show_bug.cgi?id=27481#c1.
It fixes 9 tests failed with machine verifier enabled and listed
in PR27481.
Differential Revision: https://reviews.llvm.org/D32394
llvm-svn: 302527
When a 128 bit COPY is lowered into two instructions, an impl-use operand of
the super-reg should be added to each new instruction in case one of the
sub-regs is undefined.
Review: Ulrich Weigand
llvm-svn: 302146
It is needed to check that the number of operands are 2 when
finding the case of a logic combination, e.g. 'and' of two compares.
Review: Ulrich Weigand
llvm-svn: 302022
This patch replaces the separate APInts for KnownZero/KnownOne with a single KnownBits struct. This is similar to what was done to ValueTracking's version recently.
This is largely a mechanical transformation from KnownZero to Known.Zero.
Differential Revision: https://reviews.llvm.org/D32569
llvm-svn: 301620
In getCmpSelInstrCost(), CondTy may actually be scalar while ValTy is a
vector when LoopVectorizer is the caller. Therefore the assert that CondTy
must be a vector type if ValTy is was wrong and is now removed.
Review: Ulrich Weigand
llvm-svn: 301533
1. RegisterClass::getSize() is split into two functions:
- TargetRegisterInfo::getRegSizeInBits(const TargetRegisterClass &RC) const;
- TargetRegisterInfo::getSpillSize(const TargetRegisterClass &RC) const;
2. RegisterClass::getAlignment() is replaced by:
- TargetRegisterInfo::getSpillAlignment(const TargetRegisterClass &RC) const;
This will allow making those values depend on subtarget features in the
future.
Differential Revision: https://reviews.llvm.org/D31783
llvm-svn: 301221
Since SystemZ supports vector element load/store instructions, there is no
need for extracts/inserts if a vector load/store gets scalarized.
This patch lets Target specify that it supports such instructions by means of
a new TTI hook that defaults to false.
The use for this is in the LoopVectorizer getScalarizationOverhead() method,
which will with this patch produce a smaller sum for a vector load/store on
SystemZ.
New test: test/Transforms/LoopVectorize/SystemZ/load-store-scalarization-cost.ll
Review: Adam Nemet
https://reviews.llvm.org/D30680
llvm-svn: 300056
getArithmeticInstrCost(), getShuffleCost(), getCastInstrCost(),
getCmpSelInstrCost(), getVectorInstrCost(), getMemoryOpCost(),
getInterleavedMemoryOpCost() implemented.
Interleaved access vectorization enabled.
BasicTTIImpl::getCastInstrCost() improved to check for legal extending loads,
in which case the cost of the z/sext instruction becomes 0.
Review: Ulrich Weigand, Renato Golin.
https://reviews.llvm.org/D29631
llvm-svn: 300052
A test case was found with llvm-stress that caused DAGCombiner to crash
when compiling for an older subtarget without vector support.
SystemZTargetLowering::combineTruncateExtract() should do nothing for older
subtargets.
This check was placed in canTreatAsByteVector(), which also helps in a few
other places.
Review: Ulrich Weigand
llvm-svn: 299763
A number of backends (AArch64, MIPS, ARM) have been using
MCContext::reportError to report issues such as out-of-range fixup values in
their TgtAsmBackend. This is great, but because MCContext couldn't easily be
threaded through to the adjustFixupValue helper function from its usual
callsite (applyFixup), these backends ended up adding an MCContext* argument
and adding another call to applyFixup to processFixupValue. Adding an
MCContext parameter to applyFixup makes this unnecessary, and even better -
applyFixup can take a reference to MCContext rather than a potentially null
pointer.
Differential Revision: https://reviews.llvm.org/D30264
llvm-svn: 299529
Since LOCR only accepts GR32 virtual registers, its operands must be copied
into this regclass in insertSelect(), when an LOCR is built. Otherwise, the
case where the source operand was GRX32 will produce invalid IR.
Review: Ulrich Weigand
llvm-svn: 299220
Even on older subtargets that lack vector support, there may be vector values
with just one element in the input program. These are converted during DAG
legalization to scalar values.
The pre-legalize SystemZ DAGCombiner methods should in this circumstance not
touch these nodes. This patch adds a check for this in
SystemZTargetLowering::combineEXTRACT_VECTOR_ELT().
Review: Ulrich Weigand
llvm-svn: 299213
The def operand of the new LG/LD should have the old def operands
flags and subreg index.
New test: test/CodeGen/SystemZ/fold-memory-op-impl.ll
Review: Ulrich Weigand
llvm-svn: 298341
If one of the subregs of the 128 bit reg is undefined when splitMove() splits
a store into two instructions, a use of an undefined physical register
results.
To remedy this, an implicit use of the super register is added onto both new
instructions, along with propagated kill and undef flags.
This was discovered with llvm-stress, and that test case is attached as
test/CodeGen/SystemZ/splitMove_undefReg_mverifier.ll
Thanks to Matthias Braun for helping with a nice explanation.
Review: Ulrich Weigand
llvm-svn: 298047
The GeneralShuffle::add() method used to have an assert that made sure that
source elements were at least as big as the destination elements. This was
wrong, since it is actually expected that an EXTRACT_VECTOR_ELT node with a
smaller source element type than the return type gets extended.
Therefore, instead of asserting this, it is just checked and if this is the
case 'false' is returned from the GeneralShuffle::add() method. This case
should be very rare and is not handled further by the backend.
Review: Ulrich Weigand.
llvm-svn: 292888
Vector immediate load instructions should have the isAsCheapAsAMove, isMoveImm
and isReMaterializable flags set. With them, these instruction will get
hoisted out of loops.
Review: Ulrich Weigand
llvm-svn: 292790
During post-RA pseudo expansion, an 'undef' flag of the source operand should
be propagated by emitGRX32Move().
Review: Ulrich Weigand
llvm-svn: 292353
Rename from addOperand to just add, to match the other method that has been
added to MachineInstrBuilder for adding more than just 1 operand.
See https://reviews.llvm.org/D28057 for the whole discussion.
Differential Revision: https://reviews.llvm.org/D28556
llvm-svn: 291891
A store of an extracted element or a load which gets inserted into a vector,
will be combined into a vector load/store element instruction.
Therefore, isFoldableMemAccessOffset(), which is called by LSR, should
return false in these cases.
Reviewer: Ulrich Weigand
llvm-svn: 291673
Add assembler support for all atomic instructions that weren't already
supported. Some of those could be used to implement codegen for 128-bit
atomic operations, but this isn't done here yet.
llvm-svn: 288526
Add assembler support for instructions manipulating the FPC.
Also add codegen support via the GCC compatibility builtins:
__builtin_s390_sfpc
__builtin_s390_efpc
llvm-svn: 288525
Move setting of hasSideEffects out of SystemZInstrFormats.td,
to allow use of the format classes for instructions where this
flag shouldn't be set. NFC.
llvm-svn: 288524
Recommitting r288293 with some extra fixes for GlobalISel code.
Most of the exception handling members in MachineModuleInfo is actually
per function data (talks about the "current function") so it is better
to keep it at the function instead of the module.
This is a necessary step to have machine module passes work properly.
Also:
- Rename TidyLandingPads() to tidyLandingPads()
- Use doxygen member groups instead of "//===- EH ---"... so it is clear
where a group ends.
- I had to add an ugly const_cast at two places in the AsmPrinter
because the available MachineFunction pointers are const, but the code
wants to call tidyLandingPads() in between
(markFunctionEnd()/endFunction()).
Differential Revision: https://reviews.llvm.org/D27227
llvm-svn: 288405
Now that we have fixups that only fill parts of a byte, it turns
out we have to mask off the bits outside the fixup area when
applying them. Failing to do so caused invalid object code to
be emitted for bprp with a negative 12-bit displacement.
llvm-svn: 288374
Jonas Paulsson