Target doesn't really need to know about ClangASTContext more than any
other TypeSystem. We can create a method ClangASTContext::GetScratch for
anything who needs a ClangASTContext specifically instead of just a
generic TypeSystem.
The initialization was accidentally lost in https://reviews.llvm.org/D71310, causing a ubsan failure:
/Users/buildslave/jenkins/workspace/lldb-cmake-sanitized/llvm-project/lldb/include/lldb/DataFormatters/TypeCategory.h:278:35: runtime error: load of value 190, which is not a valid value for type 'bool'
SUMMARY: UndefinedBehaviorSanitizer: undefined-behavior /Users/buildslave/jenkins/workspace/lldb-cmake-sanitized/llvm-project/lldb/include/lldb/DataFormatters/TypeCategory.h:278:35 in
http://lab.llvm.org:8080/green/view/LLDB/job/lldb-cmake-sanitized/621/consoleText
Summary:
Add `function.mangled-name` key for FormatEntity to show the mangled
function names in backtraces.
rdar://54088244
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D71237
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
This renames LLDB_CONFIG_TERMIOS_SUPPORTED to LLDB_ENABLE_TERMIOS. It
now also uses cmakedefine01 to keep things consistent with out other
optional dependencies. But more importantly it won't silently fail when
you forget to include Config.h.
Summary: Not once have I looked at these numbers in a log and considered them useful. Also this should not have been implemented via an unguarded list of globals.
Reviewers: martong, shafik
Reviewed By: shafik
Subscribers: rnkovacs, JDevlieghere, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D71336
Summary:
This enables us to display the contents of atomic structs. Calling the
removal of _Atomic "desugaring" is not fully correct as it does more
than remove sugar, but it is the right thing to do for most of the
things that we care about. We can change this back once we decide to
support atomic types more comprehensively.
Reviewers: teemperor, shafik
Subscribers: jfb, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D71262
Centralize the logic to determine what libraries to link against for
curses in the CMake file where it is actually being used. Use
target_include_directories instead of include_directories.
Summary: The test logic for running libc++ tests only looks to see if `/usr/include/c++/v1` exists. This adds a fallback for including libc++ tests as long as `$(CC) -stdlib=libc++` works.
Reviewers: labath, EricWF
Subscribers: ldionne, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D71319
I don't think this test case can be handled correctly on AAPCS64.
The ABI says that the caller passes the address of the return object
in x8. x8 is a caller-spilled (aka "volatile") register, and the
function is not required to preserve x8 or to copy the address back
into x8 on function exit like the SysV x86_64 ABI does with rax.
(from aapcs64: "there is no requirement for the callee to preserve the
value stored in x8")
From my quick reading of ABISysV_arm64, I worry that it may actually be
using the value in x8 at function exit, assuming it still has the
address of the return object -
if (is_return_value) {
// We are assuming we are decoding this immediately after returning from
// a function call and that the address of the structure is in x8
reg_info = reg_ctx->GetRegisterInfoByName("x8", 0);
This will work on trivial test programs / examples, but if the function
does another function call, or overwrites x8 as a scratch register, lldb
will provide incorrect values to the user.
ABIMacOSX_arm64 doesn't do this, but it also doesn't flag the value
as unavailable so we're providing incorrect values to the user all
the time. I expect my fix will be to make ABIMacOSX_arm64 flag
the return value as unretrievable, unless I've misread the ABI.
This is a half-implemented feature that as far as we can tell was
never used by anything since its original inclusion in 2014. This
patch removes it to make remaining the code easier to understand.
Differential Revision: https://reviews.llvm.org/D71310
HasMetadata checks if our metadata map knows the given object. GetMetadata
also does this check and then does another search to actually retrieve
the value. This can all just be one lookup.
Summary:
This adds support for DWARF5 location lists which are specified
indirectly, via an index into the debug_loclists offset table. This
includes parsing the DW_AT_loclists_base attribute which determines the
location of this offset table, and support for new form DW_FORM_loclistx
which is used in conjuction with DW_AT_location to refer to the location
lists in this way.
The code uses the llvm class to parse the offset information, and I've
also tried to structure it similarly to how the relevant llvm
functionality works.
Reviewers: JDevlieghere, aprantl, clayborg
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D71268
of depending on it being set in the environment. Fred's change
from October assumed that SDKROOT was set in the environment
so that 'xcrun --show-sdk-path' would print the path. If it
was passed in as a Makefile variable, it wouldn't be set in
the environment and xcrun --show-sdk-path would always show the
macOS SDK path. When running the lldb testsuite against an ios
device via lit, this seems to be the case.
This refactoring makes the lookup caching easier to reason about. This
has no observable effect although it does slightly change what is
being cached.
- Before this patch a negative lookup in the LanguageCategory would be
cached, but a positive wouldn't.
- After this patch LanguageCategory lookups aren't cached by
FormatManager, period. (LanguageCategory has its own FormatCache for this!)
Differential Revision: https://reviews.llvm.org/D71289
The cache in FormatCache uses only a type name as key. The hardcoded
formats, synthetic children, etc inspect an entire ValueObject to
determine their eligibility, which isn't modelled in the cache. This
leads to bugs such as the one in this patch (where two similarly named
types in different files have different hardcoded summary
providers). The problem is exaggerated in the Swift language plugin
due to the language's dynamic nature.
rdar://problem/57756763
Differential Revision: https://reviews.llvm.org/D71233
As suggested by Pavel in a code review:
> Can we replace this (and maybe python too, while at it) with a
> Host/Config.h entry? A global definition means that one has to
> recompile everything when these change in any way, whereas in
> practice only a handful of files need this..
Differential revision: https://reviews.llvm.org/D71280
When running the test suite with always capture on, a handful of tests
are failing because they have multiple targets and therefore multiple
GDB remote connections. The current reproducer infrastructure is capable
of dealing with that.
This patch reworks the GDB remote provider to support multiple GDB
remote connections, similar to how the reproducers support shadowing
multiple command interpreter inputs. The provider now keeps a list of
packet recorders which deal with a single GDB remote connection. During
replay we rely on the order of creation to match the number of packets
to the GDB remote connection.
Differential revision: https://reviews.llvm.org/D71105
This is a preparatory patch for an upcoming bugfix.
FormatManager and friends have four identical implementations of many
accessor functions to deal with the four types of shared pointers in
the FormatCache. This patch replaces these implementations with
templates. While this patch drastically reduces the amount of source
code and its maintainablity, it doesn't actually improve code
size. I'd argue, this is still an improvement.
rdar://problem/57756763
Differential Revision: https://reviews.llvm.org/D71231
Summary:
Our Editline implementation in LLDB supports using the wchar interface of Editline which
should improve handling of unicode input when using Editline. At the moment we essentially
just ignore unicode input and echo the escaped unicode code point (`\U1234`) to the command line
(which we then also incorrectly treat as multiple characters, so console navigation is also broken afterwards).
This patch just adds the include to the host config file which already contains the LLDB_EDITLINE_USE_WCHAR
define to enable the Editline support (we just never included it in the file before). With this we now actually
echo back unicode characters on macOS and we no longer ignore unicode input. On Linux this doesn't
seem to improve the echoing back of characters but at least it fixes that we ignore unicode input.
Reviewers: labath
Reviewed By: labath
Subscribers: JDevlieghere, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D71251
Summary:
A *lot* of ClangASTContext functions contained repetitive code for
"desugaring" certain kinds of clang types. This patch creates a utility
function for performing this task.
Right now it handles four types (auto, elaborated, paren and typedef),
as these are the types that were handled everywhere. There are probably
other kinds of types that could/should be added here too (TypeOf,
decltype, ...), but I'm leaving that for a separate patch as doing that
would not be NFC (though I'm pretty sure that adding them will not hurt,
and it may in fact fix some bugs).
In another patch I'd like to add "atomic" type to this list to properly
display atomic structs.
Since sometimes one may want to handle a certain kind of type specially
(right now we have code which does that with typedefs), the Desugar
function takes a "mask" argument, which can supress desugaring of
certain kinds of types.
Reviewers: teemperor, shafik
Subscribers: jfb, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D71212
If not set, the address byte size was implied to be the one of the
host process.
This allows reverting the functional change from 31087b2ae9154, since
now PECOFF does the same as ELF and MachO wrt setting both byte order
and address size on m_data within ParseHeader.
Differential Revision: https://reviews.llvm.org/D71108
"The debug adapter supports the delayed loading of parts of the stack,
which requires that both the 'startFrame' and 'levels' arguments and the
'totalFrames' result of the 'StackTrace' request are supported."
Lack of this field makes VSCode incorrectly display stack traces information
D71034
This test was accidentally passing on non-darwin OS because it was
explicitly setting the CFLAGS make variable. This meant that (in the
default config) it was building with absolutely no debug info, and so
setting a breakpoint on a stripped symbol failed, because there was
really no trace of it remaining. In other configurations, we were
generating the debug info (-gsplit-dwarf implies -g) and the test failed
because we did not treat the zeroed out debug info address specially.
The test was also xfailed in pretty much every non-standard
configuration.
This patch fixes the makefile to avoid messing with CFLAGS (use
CFLAGS_EXTRAS instead). This causes it to fail in all configurations
(except darwin), and so I replace the various decorators with a simple
os!=darwin check.
Guard the Python type map in SBTarget by the SWIGPYTHON define to
ensures the rest of the interface can be reused for other languages
supported by SWIG.
Summary:
This patch deletes the lldb location list parser and teaches the
DWARFExpression class to use the parser in llvm instead. I have
centralized all the places doing the parsing into a single
GetLocationExpression function.
In theory the the actual location list parsing should be covered by llvm
tests, and this glue code by our existing location list tests, but since
we don't have that many location list tests, I've tried to extend the
coverage a bit by adding some explicit dwarf5 loclist handling and a
test of the dumping code.
For DWARF4 location lists this should be NFC (modulo small differences
in error handling which should only show up on invalid inputs). In case
of DWARF5, this fixes various missing bits of functionality, most
notably, the lack of support for DW_LLE_offset_pair.
Reviewers: JDevlieghere, aprantl, clayborg
Subscribers: lldb-commits, dblaikie
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D71003
Summary:
Lldb support base address selection entries in location lists was broken
for a long time. This wasn't noticed until llvm started producing these
kinds of entries more frequently with r374600.
In r374769, I made a quick patch which added sufficient support for them
to get the test suite to pass. However, I did not fully understand how
this code operates, and so the fix was not complete. Specifically, what
was lacking was the ability to handle modules which were not loaded at
their preferred load address (for instance, due to ASLR).
Now that I better understand how this code works, I've come to the
conclusion that the current setup does not provide enough information
to correctly process these entries. In the current setup the location
lists were parameterized by two addresses:
- the distance of the function start from the start of the compile unit.
The purpose of this was to make the location ranges relative to the
start of the function.
- the actual address where the function was loaded at. With this the
function-start-relative ranges can be translated to actual memory
locations.
The reason for the two values, instead of just one (the load bias) is (I
think) MachO, where the debug info in the object files will appear to be
relative to the address zero, but the actual code it refers to
can be moved and reordered by the linker. This means that the location
lists need to be "linked" to reflect the locations in the actual linked
file.
These two bits of information were enough to correctly process location
lists which do not contain base address selection entries (and so all
entries are relative to the CU base). However, they don't work with
them because, in theory two base address can be completely unrelated (as
can happen for instace with hot/cold function splitting, where the
linker can reorder the two pars arbitrarily).
To fix that, I split the first parameter into two:
- the compile unit base address
- the function start address, as is known in the object file
The new algorithm becomes:
- the location lists are processed as they were meant to be processed.
The CU base address is used as the initial base address value. Base
address selection entries can set a new base.
- the difference between the "file" and "load" function start addresses
is used to compute the load bias. This value is added to the final
ranges to get the actual memory location.
This algorithm is correct for non-MachO debug info, as there the
location lists correctly describe the code in the final executable, and
the dynamic linker can just move the entire module, not pieces of it. It
will also be correct for MachO if the static linker preserves relative
positions of the various parts of the location lists -- I don't know
whether it actually does that, but judging by the lack of base address
selection support in dsymutil and lldb, this isn't something that has
come up in the past.
I add a test case which simulates the ASLR scenario and demonstrates
that base address selection entries now work correctly here.
Reviewers: JDevlieghere, aprantl, clayborg
Subscribers: dblaikie, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D70532
Summary:
This patch adds support for atomic types (DW_TAG_atomic_type) to LLDB. It's mostly just filling out all the switch-statements that didn't implement Atomic case with the usual boilerplate.
Thanks Pavel for writing the test case.
Reviewers: labath, aprantl, shafik
Reviewed By: labath
Subscribers: jfb, abidh, JDevlieghere, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D71183
Summary:
One of the ways we try to make LLDB faster is by only creating the Clang declarations (and loading the associated types)
when we actually need them for something. For example an evaluated expression might need to load types to
type check and codegen the expression.
Currently this mechanism isn't really tested, so we currently have no way to know how many Clang nodes we load and
when we load them. In general there seems to be some confusion when and why certain Clang nodes are created.
As we are about to make some changes to the code which is creating Clang AST nodes we probably should have
a test that at least checks that the current behaviour doesn't change. It also serves as some kind of documentation
on the current behaviour.
The test in this patch is just evaluating some expressions and checks which Clang nodes are created due to this in the
module AST. The check happens by looking at the AST dump of the current module and then scanning it for the
declarations we are looking for.
I'm aware that there are things missing in this test (inheritance, template parameters, non-expression evaluation commands)
but I'll expand it in follow up patches.
Also this test found two potential bugs in LLDB which are documented near the respective asserts in the test:
1. LLDB seems to always load all types of local variables even when we don't reference them in the expression. We had patches
that tried to prevent this but it seems that didn't work as well as it should have (even though we don't complete these
types).
2. We always seem to complete the first field of any record we run into. This has the funny side effect that LLDB is faster when
all classes in a project have an arbitrary `char unused;` as their first member. We probably want to fix this.
Reviewers: shafik
Subscribers: abidh, JDevlieghere, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D71056
Use type elaborated spellings for the parameter to avoid the ambiguity
between `llvm` and `lldb_private` names. This is needed for building
with Visual Studio.
Summary:
This patch simplifies register accesses in NativeRegisterContextLinux_arm64
and also adds some bare minimum caching to avoid multiple calls to ptrace
during a stop.
Linux ptrace returns data in the form of structures containing GPR/FPR data.
This means that one single call is enough to read all GPRs or FPRs. We do
that once per stop and keep reading from or writing to the buffer that we
have in NativeRegisterContextLinux_arm64 class. Before a resume or detach we
write all buffers back.
This is tested on aarch64 thunder x1 with Ubuntu 18.04. Also tested
regressions on x86_64.
Reviewers: labath, clayborg
Reviewed By: labath
Subscribers: kristof.beyls, lldb-commits
Differential Revision: https://reviews.llvm.org/D69371
Summary:
When creating a test with `lldbinline.MakeInlineTest()`, the reported `inspect.getfile(test.__class__)` is `lldbtest.pyc`, meaning any `.categories` file will be ineffective for those tests. Check for the test_filename first, which inline tests will set.
Additionally, raise an error with the starting dir if `.categories` is not found. This makes the problem more obvious when it occurs: when the test is separated from the test framework tree.
Reviewers: labath, JDevlieghere
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D71099
In DWARF5 DW_AT_low_pc (and DW_AT_entry_pc, and possibly others) can use
DW_FORM_addrx to refer to the address indirectly. This means we need to
have processed the DW_AT_addr_base attribute before we can do anything
with these.
Since we were processing the unit attributes serially, this created a
problem in cases where the DW_AT_addr_base comes after DW_AT_low_pc --
we would end up computing the wrong unit base address, which also
corrupted any values which later depended on that (for instance range
lists). Clang currently always emits DW_AT_addr_base last.
The fix is simple -- process DW_AT_addr_base first, regardless of its
position in the attribute list.
the value of DW_AT_rnglists_base of the skeleton unit is for that unit
alone (e.g. used in DW_AT_ranges of the unit DIE) and should not apply
to the split unit.
The split unit has a hardcoded range list base value -- we should
initialize range list code whenever we detect a nonempty
debug_rnglists.dwo section.
Summary:
This was causing problems on linux, where we'd end up calling the
deleting destructor instead of a regular one (because they have the same
demangled name), making a lot of mischief in the process.
The only place where this was necessary (according to the test suite, at
least) was to call a base structor instead of a complete one, but this
is now handled in a more targeted fashion.
TestCallOverriddenMethod is now re-enabled as it now passes reliably.
Reviewers: teemperor, JDevlieghere
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D70722
I was working on SearchFilter.cpp and felt it a bit too complex in some cases in terms of nesting and logic flow.
Reviewers: teemperor, JDevlieghere
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D71022
This replaces `include $(LEVEL)/Makefile.rules` with `include Makefile.rules`.
The lldb test driver already passes the include path when running make, and specifically looking for "../../Makefile.rules" forces the test to be in a specific location.
Removing this hardcoded relative path will make it possible to move this test as-is.
GetMaxU64Bitfield(...) uses the ul suffix but we require a 64 bit unsigned integer and ul could be 32 bit. So this replacing it with a explicit cast and refactors the code around it to use an early exit.
Differential Revision: https://reviews.llvm.org/D70992
Summary:
Yet another step on the long road towards getting rid of lldb's Stream class.
We probably should just make this some kind of member of Address/AddressRange, but it seems quite often we just push
in random integers in there and this is just about getting rid of Stream and not improving arbitrary APIs.
I had to rename another `DumpAddress` function in FormatEntity that is dumping the content of an address to make Clang happy.
Reviewers: labath
Reviewed By: labath
Subscribers: JDevlieghere, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D71052
Summary:
Our rnglist support was working only for the trivial cases (one CU),
because we only ever parsed one contribution out of the debug_rnglists
section. This means we were never able to resolve range lists for the
second and subsequent units (DW_FORM_sec_offset references came out
blang, and DW_FORM_rnglistx references always used the ranges lists from
the first unit).
Since both llvm and lldb rnglist parsers are sufficiently
self-contained, and operate similarly, we can fix this problem by
switching to the llvm parser instead. Besides the changes which are due
to variations in the interface, the main thing is that now the range
list object is a member of the DWARFUnit, instead of the entire symbol
file. This ensures that each unit can get it's own private set of range
list indices, and is consistent with how llvm's DWARFUnit does it
(overall, I've tried to structure the code the same way as the llvm
version).
I've also added a test case for the two unit scenario.
Reviewers: JDevlieghere, aprantl, clayborg
Subscribers: dblaikie, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D71021
Summary:
This patch adds code which will substitute references to the full object
constructors/destructors with their base object versions.
Like all substitutions in this category, this operation is not really
sound, but doing this in a more precise way allows us to get rid of a
much larger hack -- matching function according to their demangled
names, which effectively does the same thing, but also much more.
This is a (very late) follow-up to D54074.
Background: clang has an optimization which can eliminate full object
structors completely, if they are found to be equivalent to their base
object versions. It does this because it assumes they can be regenerated
on demand in the compile unit that needs them (e.g., because they are
declared inline). However, this doesn't work for the debugging scenario,
where we don't have the structor bodies available -- we pretend all
constructors are defined out-of-line as far as clang is concerned. This
causes clang to emit references to the (nonexisting) full object
structors during expression evaluation.
Fun fact: This is not a problem on darwin, because the relevant
optimization is disabled to work around a linker bug.
Reviewers: teemperor, JDevlieghere
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D70721
Summary:
Lldb's "format-independent" debug info made use of the fact that DWARF
(<=4) did not use the file index zero, and reused the support file index
zero for storing the compile unit name.
While this provided some convenience for DWARF<=4, it meant that the PDB
plugin needed to artificially remap file indices in order to free up
index 0. Furthermore, DWARF v5 make file index 0 legal, which meant that
similar remapping would be needed in the dwarf plugin too.
What this patch does instead is remove the requirement of having the
compile unit name in the index 0. It is not that useful since the name
can always be fetched from the CompileUnit object. Remapping code in the
pdb plugin(s) has been removed or simplified.
DWARF plugin has started inserting an empty FileSpec at index 0 to
ensure the indices keep matching up (in case of DWARF<=4). For DWARF5,
we insert the file 0 from the line table.
I add a test to ensure we can correctly lookup line table entries
referencing file 0, and in particular the case where the file 0 is also
duplicated in another file entry, as this is how clang produces line
tables in some circumstances (see pr44170). Though this is probably a
bug in clang, this is not forbidden by DWARF, and lldb already has
support for that in some (but not all) cases -- this adds a test for the
code path which was not fixed in this patch.
Reviewers: clayborg, JDevlieghere, jdoerfert
Subscribers: aprantl, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D70954
Summary:
This patch fixes a bug where when target triple created from elf information
is arm-*-linux-eabihf and platform triple is armv8l-*-linux-gnueabihf. Merging
both triple results in armv8l--unknown-unknown.
This happens because we order a triple update while calling CoreUpdated and
CoreUpdated creates a new triple with no vendor or environment information.
Making sure we do not update triple and just update to more specific core
fixes the issue.
Reviewers: labath, jasonmolenda, clayborg
Reviewed By: jasonmolenda
Subscribers: jankratochvil, kristof.beyls, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D70155
options class. This value was hanging around so for instance if you made a scripted breakpoint
resolver, then went to set another breakpoint, it would still think you had passed in a class
name and the breakpoint wouldn't do what you expected.
Make it possible to override reproducer capture with the
LLDB_CAPTURE_REPRODUCER environment variable.
The goal of this change is twofold.
(1) I want to be able to enable capturing reproducers during regular
test runs, both locally and on the bots. To do so I need a way to
force capture. I cannot do this through the Python API, because
reproducer capture must be enabled *before* the debugger
initialized, which happens automatically when doing `import lldb`.
(2) I want to provide an escape hatch for when reproducers are enabled
by default. Downstream we have reproducer capture enabled by default
in the driver.
This patch solves both problems by overriding the reproducer mode based
on the environment variable. Acceptable values are 0/1 and ON/OFF.
The changes are minor; primarily debugserver needs to go through
accessor functions/macros when changing pc/fp/sp/lr, and debugserver
needs to clear any existing pointer auth bits from values in two
cases. debugserver can fetch the number of bits used for addressing
from a sysctl, and will include that in the qHostInfo reply. Update
qHostInfo documentation to document it.
The previous fix attempt, in 62a635e864, used too much escaping
for the backslashes.
But instead of using regexes to match both path separator forms,
remove the path altogether to unify the output from the testcase
between platforms.
Summary:
Using a BreakpointList corrupts the breakpoints' IDs because
BreakpointList::Add sets the ID, so use a vector instead, and
update the signature to return the vector wrapped in an
llvm::Expected which can propagate any error from the inner
call to StringIsBreakpointName.
Note that, despite the similar name, SBTarget::FindBreakpointsByName
doesn't suffer the same problem, because it uses a SBBreakpointList,
which is more like a BreakpointIDList than a BreakpointList under the
covers.
Add a check to TestBreakpointNames that, without this fix, notices the
ID getting mutated and fails.
Reviewers: jingham, JDevlieghere
Reviewed By: JDevlieghere
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D70907
Summary:
The FileSpec class is often used as a sort of a pattern -- one specifies
a bare file name to search, and we check if in matches the full file
name of an existing module (for example).
These comparisons used FileSpec::Equal, which had some support for it
(via the full=false argument), but it was not a good fit for this job.
For one, it did a symmetric comparison, which makes sense for a function
called "equal", but not for typical searches (when searching for
"/foo/bar.so", we don't want to find a module whose name is just
"bar.so"). This resulted in patterns like:
if (FileSpec::Equal(pattern, file, pattern.GetDirectory()))
which would request a "full" match only if the pattern really contained
a directory. This worked, but the intended behavior was very unobvious.
On top of that, a lot of the code wanted to handle the case of an
"empty" pattern, and treat it as matching everything. This resulted in
conditions like:
if (pattern && !FileSpec::Equal(pattern, file, pattern.GetDirectory())
which are nearly impossible to decipher.
This patch introduces a FileSpec::Match function, which does exactly
what most of FileSpec::Equal callers want, an asymmetric match between a
"pattern" FileSpec and a an actual FileSpec. Empty paterns match
everything, filename-only patterns match only the filename component.
I've tried to update all callers of FileSpec::Equal to use a simpler
interface. Those that hardcoded full=true have been changed to use
operator==. Those passing full=pattern.GetDirectory() have been changed
to use FileSpec::Match.
There was also a handful of places which hardcoded full=false. I've
changed these to use FileSpec::Match too. This is a slight change in
semantics, but it does not look like that was ever intended, and it was
more likely a result of a misunderstanding of the "proper" way to use
FileSpec::Equal.
[In an ideal world a "FileSpec" and a "FileSpec pattern" would be two
different types, but given how widespread FileSpec is, it is unlikely
we'll get there in one go. This at least provides a good starting point
by centralizing all matching behavior.]
Reviewers: teemperor, JDevlieghere, jdoerfert
Subscribers: emaste, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D70851
ParseChildMembers does a few things, only one part is actually parsing a single
member. This extracts the member parsing logic into its own function.
This commit just moves the code as-is into its own function and forwards the parameters/
local variables to it, which means it should be NFC.
The only actual changes to the code are replacing 'break's (and one very curious 'continue'
that behaves like a 'break') with 'return's.
Summary: This should allow further simplifications, but it's a first step.
Reviewers: teemperor, jingham, friss
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D70983
The naming used by editline for the history operations is counter
intuitive to how it's used in lldb for the REPL.
- The H_PREV operation returns the previous element in the history,
which is newer than the current one.
- The H_NEXT operation returns the next element in the history, which
is older than the current one.
This exposed itself as a bug in the REPL where the behavior of up- and
down-arrow was inverted. This wasn't immediately obvious because of how
we save the current "live" entry.
This patch fixes the bug and introduces and enum to wrap the editline
operations that match the semantics of lldb.
Differential revision: https://reviews.llvm.org/D70932
To ensure a reproducer works correctly, the version of LLDB used for
capture and replay must match. Right now the reproducer already contains
the LLDB version. However, this is purely informative. LLDB will happily
replay a reproducer generated with a different version of LLDB, which
can cause subtle differences.
This patch adds a version check which compares the current LLDB version
with the one in the reproducer. If the version doesn't match, LLDB will
refuse to replay. It also adds an escape hatch to make it possible to
still replay the reproducer without having to mess with the recorded
version. This might prove useful when you know two versions of LLDB
match, even though the version string doesn't. This behavior is
triggered by passing a new flag -reproducer-skip-version-check to the
lldb driver.
Differential revision: https://reviews.llvm.org/D70934
Summary:
The IOHandler class source file is currently around 4600 LOC. However only 200
of these lines are concerned with the actual IOHandler class and the rest are the
implementations for Editline, IOHandlerConfirm and the Curses interface. All these
large features also cause that the IOHandler (which is in Core) has a large set of dependencies
on other parts of LLDB.
This patch splits out the code for the curses interface into its own file. This way
the simple IOHandler code is no longer buried in-between much larger functionalities.
Next up is splitting out the other IOHandlers into their own files and then move them
to more appropriate parts of LLDB.
Reviewers: labath, clayborg, JDevlieghere
Reviewed By: labath
Subscribers: mgorny, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D70946
This code was just creating a new SymbolContextList with any found functions
in the front and orders them by how close they are to the current frame.
This refactors this code into its own function to make this more obvious.
Doesn't do any other changes to the code, so this is NFC.
I assumed this was just a single typo, but it seems we actually have
a whole bunch of tabs in this file which cause Python to complain
about mixing tabs and spaces.
Mixing tabs and spaces makes Python exit with this error:
File "llvm/lldb/packages/Python/lldbsuite/test/functionalities/return-value/TestReturnValue.py", line 23
return (self.getArchitecture() == "aarch64" and self.getPlatform() == "linux")
^
TabError: inconsistent use of tabs and spaces in indentation
Summary:
Previously the ABI plugin exposed some "register infos" and the
gdb-remote code used those to fill in the missing bits. Now, the
"filling in" code is in the ABI plugin itself, and the gdb-remote code
just invokes that.
The motivation for this is two-fold:
a) the "augmentation" logic is useful outside of process gdb-remote. For
instance, it would allow us to avoid repeating the register number
definitions in minidump code.
b) It gives more implementation freedom to the ABI classes. Now that
these "register infos" are essentially implementation details, classes
can use other methods to obtain dwarf/eh_frame register numbers -- for
instance they can consult llvm MC layer.
Since the augmentation code was not currently tested anywhere, I took
the opportunity to create a simple test for it.
Reviewers: jasonmolenda, clayborg, tatyana-krasnukha
Subscribers: aprantl, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D70906
The idea is to remove front-end analysis for the parameter's value
modification and leave it to the value tracking system. Front-end in some
cases marks a parameter as modified even the line of code that modifies the
parameter gets optimized, that implies that this will cover more entry
values even. In addition, extending the support for modified parameters
will be easier with this approach.
Since the goal is to recognize if a parameter’s value has changed, the idea
at very high level is: If we encounter a DBG_VALUE other than the entry
value one describing the same variable (parameter), we can assume that the
variable’s value has changed and we should not track its entry value any
more. That would be ideal scenario, but due to various LLVM optimizations,
a variable’s value could be just moved around from one register to another
(and there will be additional DBG_VALUEs describing the same variable), so
we have to recognize such situation (otherwise, we will lose a lot of entry
values) and salvage the debug entry value.
Differential Revision: https://reviews.llvm.org/D68209
I have either opened new bug reports for these tests, or added links to
existing bugs.
This should help make the lldb-aarch64-ubuntu buildbot green (there will
still be some unexpected passes that someone should look into, but those
can be handled later).
Summary:
ThreadSafeSTLVector and ThreadSafeSTLMap are not useful for achieving any degree of thread safety in LLDB
and should be removed before they are used in more places. They are only used (unsurprisingly incorrectly) in
`ValueObjectSynthetic::GetChildAtIndex`, so this patch replaces their use there with a simple mutex with which
we guard the related data structures. This doesn't make ValueObjectSynthetic::GetChildAtIndex
any more thread-safe, but on the other hand it at least allows us to get rid of the ThreadSafeSTL* data structures
without changing the observable behaviour of ValueObjectSynthetic (beside that it is now a few bytes smaller).
Reviewers: labath, JDevlieghere, jingham
Reviewed By: labath
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D70845
This simplifies the CMake logic for adding the Python examples to the
Python package. It unifies the use of create_python_package by adding
the NOINIT option and removes the `target` argument, which is always
`finish_swig`.
If filling in a DataExtractor from an ObjectFile, e.g. via the
ReadSectionData method, the output DataExtractor gets the address
size from the m_data member.
ObjectFile's m_data member is initialized without knowledge about
the address size (so the address size is set based on the host's
sizeof(void*), and at that point within ObjectFile's constructor,
virtual methods implemented in subclasses (like GetAddressByteSize())
can't be called, therefore fix it up when filling in external
DataExtractors.
This makes sure that line tables from executables with a different
address size are parsed properly; previously this tripped up
DWARFDebugLine::LineTable::parse for 32 bit executables on a 64 bit
host, as the address size in the line table (4) didn't match the
one set in the DWARFDataExtractor.
Differential Revision: https://reviews.llvm.org/D70848
Summary:
This test was broken in two ways:
* Using the wrong API (e.g.: format = instead of SetFormat)
* The hex checker was only checking "01" which will pass with 0x0000001
Reviewers: clayborg, lanza, wallace
Reviewed By: clayborg
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D70884
Extend EmulateMOVRdRm to identify "mov r11, sp" in thumb mode as
setting the frame pointer, if r11 is the frame pointer register.
Differential Revision: https://reviews.llvm.org/D70797
ClangASTSource currently takes a clang::ASTContext and keeps that
around, but a lot of LLDB's functionality for doing operations
on a clang::ASTContext is in its ClangASTContext twin class. We
currently constantly recompute the respective ClangASTContext
from the clang::ASTContext while we instead could just pass and
store a ClangASTContext in the ClangASTSource. This also allows
us to get rid of a bunch of unreachable error checking for cases
where recomputation fails for some reason.
This code is behind a `if (log)` that is always a nullptr as the initializer
was commented out. One could uncomment the initializer code, but then this logging
code just leads to a deadlock as it tries to aquire the module lock.
This removes the logging code until I get this working again.
Summary:
CompileUnit is a complicated class. Having it be implicitly convertible
to a FileSpec makes reasoning about it even harder.
This patch replaces the inheritance by a simple member and an accessor
function. This avoid the need for casting in places where one needed to
force a CompileUnit to be treated as a FileSpec, and does not add much
verbosity elsewhere.
It also fixes a bug where we were wrongly comparing CompileUnit& and a
CompileUnit*, which compiled due to a combination of this inheritance
and the FileSpec*->FileSpec implicit constructor.
Reviewers: teemperor, JDevlieghere, jdoerfert
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D70827
Summary:
I found the above named method hard to read because it had
a) many nested blocks,
b) one return statement at the end with some logic involved,
c) a duplicated while-loop with just small differences in it.
I decided to refactor this function by employing an early exit strategy.
In order to capture the logic in the return statement and to not have it
repeated more than once I chose to implement a very small lamda function
that captures all the variables it needs.
I also replaced the two while-loops with just one.
This is a non-functional change (NFC).
Reviewers: jdoerfert, teemperor
Reviewed By: teemperor
Subscribers: labath, teemperor, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D70774
This method is only used in ClangASTContext.
Also removes the includes we only needed for the ClangASTContext RTTI check
in the CompilerDecl[Context].cpp files.
Summary:
A most of these tests create FileSpecs with a hardcoded style. Add
utility functions which create a file spec of a given style to simplify
things.
While in there add SCOPED_TRACE messages to tests which loop over
multiple inputs to ensure it's clear which of the inputs failed.
Reviewers: teemperor
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D70814
Summary:
I found the above named method hard to read because it had
a) many nested blocks and
b) one return statement at the end with some logic involved.
I decided to refactor this function by employing an early exit strategy.
In order to capture the logic in the return statement and to not have it
repeated more than once I chose to implement a very small lamda function
that captures all the variables it needs.
This is a non-functional change (NFC).
Reviewers: jdoerfert
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D70774
Windows on ARM always uses thumb mode, and doesn't have most of the
mechanisms that are used in e.g. ELF for distinguishing between arm
and thumb.
Differential Revision: https://reviews.llvm.org/D70796
COFF section names can either be stored truncated to 8 chars, in the
section header, or as a longer section name, stored separately in the
string table.
libunwind locates the .eh_frame section by runtime introspection,
which only works for section names stored in the section header (as
the string table isn't mapped at runtime). To support this behaviour,
lld always truncates the section names for sections that will be
mapped, like .eh_frame.
Differential Revision: https://reviews.llvm.org/D70745
Summary:
All these functions are unused from what I can see. Unless I'm missing something here, this code
can go the way of the Dodo.
Reviewers: labath
Reviewed By: labath
Subscribers: abidh, JDevlieghere, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D70770
InitializeContext is useful for allocating a (potentially variable
size) CONTEXT struct in an unaligned byte buffer. In this case, we
already have a fixed size CONTEXT we want to initialize, and we only
used this as a very roundabout way of zero initializing it.
Instead just memset the CONTEXT we have, and set the ContextFlags field
manually.
This matches how it is done in NativeRegisterContextWindows_*.cpp.
This also makes LLDB run successfully in Wine (for a trivial tested
case at least), as Wine hasn't implemented the InitializeContext
function.
Differential Revision: https://reviews.llvm.org/D70742
This reapplies: 8ff85ed905
Original commit message:
As a follow-up to my initial mail to llvm-dev here's a first pass at the O1 described there.
This change doesn't include any change to move from selection dag to fast isel
and that will come with other numbers that should help inform that decision.
There also haven't been any real debuggability studies with this pipeline yet,
this is just the initial start done so that people could see it and we could start
tweaking after.
Test updates: Outside of the newpm tests most of the updates are coming from either
optimization passes not run anymore (and without a compelling argument at the moment)
that were largely used for canonicalization in clang.
Original post:
http://lists.llvm.org/pipermail/llvm-dev/2019-April/131494.html
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65410
This reverts commit c9ddb02659.
Summary:
I recently re-discovered that the unsinged stream operators of the
lldb_private::Stream class have a surprising behavior in that they print
the number in hex. This is all the more confusing because the "signed"
versions of those operators behave normally.
Now that, thanks to Raphael, each Stream class has a llvm::raw_ostream
wrapper, I think we should delete most of our formatting capabilities
and just delegate to that. This patch tests the water by just deleting
the operators with the most surprising behavior.
Most of the code using these operators was printing user_id_t values. It
wasn't fully consistent about prefixing them with "0x", but I've tried
to consistenly print it without that prefix, to make it more obviously
different from pointer values.
Reviewers: teemperor, JDevlieghere, jdoerfert
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D70241
This way it looks more like the code around it. The assert is also gone as it just
checks that the variables we declare directly above were not initialized by anyone.
That made more sense when this was one large function.
Part of the work to split up this monolithic parsing function.
Should be NFC but due to the kafkaesque control flow in this case statement this might
have some unintended side effects.
Fix handling concurrent watchpoint events so that they are reported
correctly in LLDB.
If multiple watchpoints are hit concurrently, the NetBSD kernel reports
them as series of SIGTRAPs with a thread specified, and the debugger
investigates DR6 in order to establish which watchpoint was hit. This
is normally fine.
However, LLDB disables and reenables the watchpoint on all threads after
each hit, which results in the hit status from DR6 being wiped.
As a result, it can't establish which watchpoint was hit in successive
SIGTRAP processing.
In order to workaround this problem, clear DR6 only if the breakpoint
is overwritten with a new one. More specifically, move cleaning DR6
from ClearHardwareWatchpoint() to SetHardwareWatchpointWithIndex(),
and do that only if the newly requested watchpoint is different
from the one being set previously. This ensures that the disable-enable
logic of LLDB does not clear watchpoint hit status for the remaining
threads.
This also involves refactoring of watchpoint logic. With the old logic,
clearing watchpoint involved wiping dr6 & dr7, and setting it setting
dr{0..3} & dr7. With the new logic, only enable bit is cleared
from dr7, and the remaining bits are cleared/overwritten while setting
new watchpoint.
Differential Revision: https://reviews.llvm.org/D70025
NetBSD ptrace interface does not populate watchpoints to newly-created
threads. Solve this via copying the watchpoints from the current thread
when new thread is reported via TRAP_LWP.
Add a test that verifies that when the user does not have permissions
to set watchpoints on NetBSD, the 'watchpoint set' errors out gracefully
and thread monitoring does not crash on being unable to copy watchpoints
to new threads.
Differential Revision: https://reviews.llvm.org/D70023
Implement major improvements to multithreaded program support. Notably,
support tracking new and exited threads, associate signals and events
with correct threads and support controlling individual threads when
resuming.
Firstly, use PT_SET_EVENT_MASK to enable reporting of created and exited
threads via SIGTRAP. Handle TRAP_LWP events to keep track
of the currently running threads.
Secondly, update the signal (both generic and SIGTRAP) handling code
to account for per-thread signals correctly. Signals delivered
to the whole process are reported on all threads, while per-thread
signals and events are reported only to the specific thread.
The remaining threads are marked as 'stopped with no reason'. Note that
NetBSD always stops all threads on debugger events.
Thirdly, implement the ability to set every thread as running, stopped
or single-stepping separately while continuing the process. This also
provides the ability to send a signal to the whole process or to one
of its thread while resuming.
Differential Revision: https://reviews.llvm.org/D70022
Summary:
Adds support for doing range-based for-loops on LLDB's VariableList and
modernises all the index-based for-loops in LLDB where possible.
Reviewers: labath, jdoerfert
Reviewed By: labath
Subscribers: JDevlieghere, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D70668
Summary:
LLDB's ASTDumper is just a clone of Clang's ASTDumper but with some scary code and
some unrelated functionality (like dumping name/attributes of types). This removes LLDB's ASTDumper
and replaces its uses with the `ClangUtils::DumpDecl` method that just calls Clang's ASTDumper
and returns the result as a string.
The few uses where we just want a textual representation of a type (which will print their name/attributes but not
dump any AST) are now also in ClangUtil under a `ToString` name until we find a better home for them.
Reviewers: labath
Reviewed By: labath
Subscribers: mgorny, JDevlieghere, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D70663
Summary:
The test used a non-stopping "run" command to launch the process. This
is different from the regular launch with no extra launch commands,
which uses eLaunchFlagStopAtEntry to ensure that the process stops
straight away.
I'm not really sure what's supposed to happen in non-stop-at-entry mode,
or if that's even supported, but what ended up happening was the launch
packet got a reply while the process was running. Then the test case did
a continue_to_next_stop(), which queued a *second* resume request
(along with the internal "resumes" which were being issued as a part of
normal process startup). These two resumes ended up chasing each other's
tails inside lldb in a way which produced hilarious log traces.
Surprisingly, the test ended up passing most of the time, but it did
cause spurious failures when the test seemed to miss a breakpoint.
This changes the test to use stop-at-entry mode in the manual launch
sequence too, which seems to be enough to make the test pass reliably.
Reviewers: clayborg, kusmour, jankratochvil
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D70127
The in_call_stack Python script makes it possible to modify the last
breakpoint to only stop if a given function is present in the call
stack. It will check both the symbol name and the function name (coming
from the debug info, in case the binary is stripped).
To use this, you have to:
1. Import the script into lldb.
(lldb) command script import in_call_stack.py
2. Set a breakpoint and use the in_call_stack alias.
(lldb) b foo
(lldb) in_call_stack bar
Note that this alias operates on the last set breakpoint. You can re-run
the in_call_stack command to modify the condition.
Split CallEdge into DirectCallEdge and IndirectCallEdge. Teach
DWARFExpression how to evaluate entry values in cases where the current
activation was created by an indirect call.
rdar://57094085
Differential Revision: https://reviews.llvm.org/D70100
This affects -gmodules only.
Under normal operation pcm_type is a shallow forward declaration
that gets completed later. This is necessary to support cyclic
data structures. If, however, pcm_type is already complete (for
example, because it was loaded for a different target before),
the definition needs to be imported right away, too.
Type::ResolveClangType() effectively ignores the ResolveState
inside type_sp and only looks at IsDefined(), so it never calls
ClangASTImporter::ASTImporterDelegate::ImportDefinitionTo(),
which does extra work for Objective-C classes. This would result
in only the forward declaration to be visible.
An alternative implementation would be to sink this into Type::ResolveClangType ( 88235812a7/lldb/source/Symbol/Type.cpp (L5809)) though it isn't clear to me how to best do this from a layering perspective.
rdar://problem/52134074
Differential Revision: https://reviews.llvm.org/D70415
This is a correctness fix for the Clang DWARF parser that primarily
matters for swift-lldb's ability to import Clang types that were
reconstructed from DWARF into Swift.
rdar://problem/55025799
Differential Revision: https://reviews.llvm.org/D70580
Summary: Ensure that breakpoint ivar is properly set in exception breakpoint resolver so that exception breakpoints set on dummy targets are resolved once real targets are created and run.
Reviewers: jingham
Reviewed By: jingham
Subscribers: teemperor, JDevlieghere, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D69880
Improve the message printed when LLDB crashes by asking the user to
replay the reproducer before attaching it to a bugreport..
********************
Crash reproducer for lldb version 10.0.0 (git@github.com:llvm/llvm-project.git revision ...)
clang revision ...
llvm revision ...
Reproducer written to '/path/to/reproducer'
Before attaching the reproducer to a bug report:
- Look at the directory to ensure you're willing to share its content.
- Make sure the reproducer works by replaying the reproducer.
Replay the reproducer with the following command:
./bin/lldb -replay /path/to/reproducer
********************
This patch replaces the existing out-of-date man page for lldb and
replaces it with an RST file from which sphinx generates the actual
troff file. This is similar to how man pages are generated for the rest
of the LLVM utilities.
The man page is generated by building the `docs-lldb-man` target.
Differential revision: https://reviews.llvm.org/D70514
Made small improvements while debugging through
CommandObjectTarget::AddModuleSymbols.
1. Refactored error case for an early out, reducing the indentation of
the rest of this long function.
2. Clarified some comments by correcting spelling and punctuation.
3. Reduced duplicate code at the end of the function.
Tested with `ninja check-lldb`
Differential Review: https://reviews.llvm.org/D70458
lldb would silently accept a response to the 'g' packet
(read all registers) which was too large; this handles the
case where it is too small.
Differential Revision: https://reviews.llvm.org/D70417
<rdar://problem/34916465>
This patch hooks the reproducer infrastructure with the signal handlers.
When lldb crashes with reproducers capture enabled, it will now generate
the reproducer and print a short message the standard out. This doesn't
affect the pretty stack traces, which are still printed before.
This patch also introduces a new reproducer sub-command that
intentionally raises a given signal to test the reproducer signal
handling.
Currently the signal handler is doing too much work. Instead of copying
over files into the reproducers in the signal handler, we should
re-invoke ourselves with a special command line flag that looks at the
VFS mapping and performs the copy.
This is a NO-OP when reproducers are disabled.
Differential revision: https://reviews.llvm.org/D70474
Remove hardcoded string prefix length assumption causing issues when
concatenating summary for NSURL in NSURLSummaryProvider. Provider relies
on concatenation of NSStringProvider results for summary, and while the
strings are prefixed with '@' in Objective-C, that is not the case in
Swift causing part of the description to be truncated.
This will be tested in the downstream fork.
Patch by Martin Svensson!
Use TARGET_TRIPLE instead of LLVM_DEFAULT_TARGET_TRIPLE, as the latter
isn't exported by LLVMConfig.cmake, which means arch detection fails if
lldb is built separately from llvm.
Searching persistent decls is a small subset of the things
FindExternalVisibleDecls does. It should be its own function instead
of being encapsulated in this `do { } while(false);` pattern.
This overload is only used in one place and having static overloads for
all methods that only do an additional clang::ASTContext -> ClangASTContext
conversion is just not sustainable.
It turns out that the ExprMutationAnalyzer can be very slow when AST
gets huge in some cases. The idea is to move this analysis to the LLVM
back-end level (more precisely, in the LiveDebugValues pass). The new
approach will remove the performance regression, simplify the
implementation and give us front-end independent implementation.
Differential Revision: https://reviews.llvm.org/D68206
Summary:
expect() forwards its command to sendline(). This can be problematic if the command already contains a newline: sendline() unconditionally adds a newline to the command, which causes the command to run twice (hitting enter in lldb runs the previous command). The expect() helper looks for the prompt and finds the first one, but because the command has run a second time, the buffer will contain the contents of the second time the command ran, causing potential erroneous matching.
Simplify the editline test, which was using different commands to workaround this misunderstanding.
Reviewers: labath
Reviewed By: labath
Subscribers: merge_guards_bot, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D70324
Muhammad Omair Javaid