Because we have to use a ConstantExpr at some point, the canonical form
isn't set in stone, but this seems reasonable.
The pretty sizeof(<vscale x 4 x i32>) dumping is a relic of ancient
LLVM; I didn't have to touch that code. :)
Differential Revision: https://reviews.llvm.org/D75887
Calculating SCEVs can be cumbersome, and may take very long time (even
hours, for very long expressions). To prevent recalculating expressions
over and over again, we cache them.
This change add cache queries to key positions, to prevent recalculation
of the expressions.
Fix PR43571.
Differential Revision: https://reviews.llvm.org/D70097
Summary:
This patch moves the getIndexExpressionsFromGEP function from polly
into ScalarEvolution so that both polly and DependenceAnalysis can
use it for the purpose of subscript delinearization when the array
sizes are not parametric.
Authored By: bmahjour
Reviewer: Meinersbur, sebpop, fhahn, dmgreen, grosser, etiotto, bollu
Reviewed By: Meinersbur
Subscribers: hiraditya, arphaman, Whitney, ppc-slack, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73995
Summary:
This was a very odd API, where you had to pass a flag into a zext
function to say whether the extended bits really were zero or not. All
callers passed in a literal true or false.
I think it's much clearer to make the function name reflect the
operation being performed on the value we're tracking (rather than on
the KnownBits Zero and One fields), so zext means the value is being
zero extended and new function anyext means the value is being extended
with unknown bits.
NFC.
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D74482
Summary:
Loop unroll spends a lot of time in SCEVs processing in case when a function
contains hundreds of simple 'for' loops with a quite complex arrays indexes like
for (int i = 0; i < 8; ++i) {
for (int j = 0; j < 32; ++j) {
C[j*8+i] = B[j*32+i+128] + A[i*64+128];
}
}
for (int i = 0; i < 8; ++i) {
for (int j = 0; j < 8; ++j) {
for (int k = 0; k < 32; ++k) {
D[k*64+i*8+j] = D[k*64+i*8+j] + E[i+16] * C[k*8+j+256];
}
}
}
The patch improves loop unroll speed since isLoopBackedgeGuardedByCond takes
much less time than isLoopEntryGuardedByCond in the edge case.
Reviewers: skatkov, sanjoy, mkazantsev
Reviewed By: sanjoy
Subscribers: fhahn, hiraditya, javed.absar, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72929
If addrecexpr has nuw flag, the value should never be less than its
start value and start value does not required to be SCEVConstant.
Reviewed By: nikic, sanjoy
Differential Revision: https://reviews.llvm.org/D71690
Teach SCEV about the @loop.decrement.reg intrinsic, which has exactly the same
semantics as a sub expression. This allows us to query hardware-loops, which
contain this @loop.decrement.reg intrinsic, so that we can calculate iteration
counts, exit values, etc. of hardwareloops.
This "int_loop_decrement_reg" intrinsic is defined as "IntrNoDuplicate". Thus,
while hardware-loops and tripcounts now become analysable by SCEV, this
prevents the usual loop transformations from applying transformations on
hardware-loops, which is what we want at this point, for which I have added
test cases for loopunrolling and IndVarSimplify and LFTR.
Differential Revision: https://reviews.llvm.org/D71563
GEP index size can be specified in the DataLayout, introduced in D42123. However, there were still places
in which getIndexSizeInBits was used interchangeably with getPointerSizeInBits. This notably caused issues
with Instcombine's visitPtrToInt; but the unit tests was incorrect, so this remained undiscovered.
This fixes the buildbot failures.
Differential Revision: https://reviews.llvm.org/D68328
Patch by Joseph Faulls!
GEP index size can be specified in the DataLayout, introduced in D42123. However, there were still places
in which getIndexSizeInBits was used interchangeably with getPointerSizeInBits. This notably caused issues
with Instcombine's visitPtrToInt; but the unit tests was incorrect, so this remained undiscovered.
Differential Revision: https://reviews.llvm.org/D68328
Patch by Joseph Faulls!
As it can be seen from accompanying cleanup, it is not unheard of
to write `~Known.Zero` meaning "what maximal value can this KnownBits
produce". But i think `~Known.Zero` isn't *that* self-explanatory,
as compared to a method with a name.
Note that not all `~Known.Zero` places were cleaned up,
only those where this arguably improves things.
New pass manager doesn't use verifyAnalysis, so currently there is no
way to call SCEV verification from command line when new PM is used.
This patch adds a pass that allows you to do that.
Reviewers: reames, fhahn, sanjoy.google, nikic
Reviewed By: fhahn
Subscribers: hiraditya, javed.absar, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70423
For the various trip-count tests, the classification isn't useful and makes the auto-generated tests super verbose. By skipping it, we make the auto-gen tests closer to the manually written ones. Up next: auto-genning a bunch of the existings tests.
Simple loop unswitch likes to leave around unsimplified and/or/xors. SCEV today bails out on these idioms which is unfortunate in general, and specifically for the unswitch interaction.
Differential Revision: https://reviews.llvm.org/D70459
This file lists every pass in LLVM, and is included by Pass.h, which is
very popular. Every time we add, remove, or rename a pass in LLVM, it
caused lots of recompilation.
I found this fact by looking at this table, which is sorted by the
number of times a file was changed over the last 100,000 git commits
multiplied by the number of object files that depend on it in the
current checkout:
recompiles touches affected_files header
342380 95 3604 llvm/include/llvm/ADT/STLExtras.h
314730 234 1345 llvm/include/llvm/InitializePasses.h
307036 118 2602 llvm/include/llvm/ADT/APInt.h
213049 59 3611 llvm/include/llvm/Support/MathExtras.h
170422 47 3626 llvm/include/llvm/Support/Compiler.h
162225 45 3605 llvm/include/llvm/ADT/Optional.h
158319 63 2513 llvm/include/llvm/ADT/Triple.h
140322 39 3598 llvm/include/llvm/ADT/StringRef.h
137647 59 2333 llvm/include/llvm/Support/Error.h
131619 73 1803 llvm/include/llvm/Support/FileSystem.h
Before this change, touching InitializePasses.h would cause 1345 files
to recompile. After this change, touching it only causes 550 compiles in
an incremental rebuild.
Reviewers: bkramer, asbirlea, bollu, jdoerfert
Differential Revision: https://reviews.llvm.org/D70211
This patch fixes two issues noticed by inspection when going to enable the loop predication code in IndVarSimplify.
Issue 1 - Both the LoopPredication transform, and the already on by default optimizeLoopExits transform, modify the exit count of the exits they modify. (either to 0 or Infinity) Looking at the code more closely, this was not reflected into SCEV and we were instead running later transforms with incorrect SCEVs. Fixing this requires forgetting the loop, weakening a too strong assert, and updating SCEV to not pessimize results when a loop is provable untaken. I haven't been able to find a test case to demonstrate the miscompile.
Issue 2 - For modules without a data layout, we can end up with unsized pointer typed exit counts. Just bail out of this case.
I think these are the last two issues which need addressed before we enable this by default. The code has already survived a decent amount of fuzzing without revealing either of the above.
Differential Revision: https://reviews.llvm.org/D69695
We were already going to all of the trouble of computing maximum constant exit counts for each loop exit, we might as well expose them through the API. The change in IndVars is mostly to demonstrate that the wired up code works, but it als very slightly strengthens the transform. The strengthened case is rather narrow though: it requires one exactly analyzeable exit, one imprecisely analyzeable exit (with the upper bound less than the precise one), and one unanalyzeable exit. I coudn't construct a reasonably stable test case.
This does increase the memory usage of the BackedgeTakenCount by a factor of 2 in the worst case.
I also noticed the loop in IndVars is O(#Exits ^ 2). This doesn't change with this patch. A future patch will cache this result inside of SCEV to avoid requering.
This is a first step in figuring out a proper API for maximum (non constant) exit counts. This may evolve a bit as we get experience with the API needs; suggestions very welcome. This patch just tried to provide a framework that we can later add maximum too in a clean and obvious way.
Summary:
This is patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: courbet
Subscribers: arsenm, dschuff, jyknight, sdardis, jvesely, nhaehnle, sbc100, jgravelle-google, hiraditya, aheejin, fedor.sergeev, jrtc27, atanasyan, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69216
llvm-svn: 375398
This is a common idiom which arises after induction variables are widened, and we have two or more exit conditions. Interestingly, we don't have instcombine or instsimplify support for this either.
Differential Revision: https://reviews.llvm.org/D69006
llvm-svn: 375349
Currently -verify-scev only fails if there is a constant difference
between two BE counts. This misses a lot of cases.
This patch adds a -verify-scev-strict options, which fails for any
non-zero differences, if used together with -verify-scev.
With the stricter checking, some unit tests fail because
of mis-matches, especially around IndVarSimplify.
If there is no reason I am missing for just checking constant deltas, I
am planning on looking into the various failures.
Reviewers: efriedma, sanjoy.google, reames, atrick
Reviewed By: sanjoy.google
Differential Revision: https://reviews.llvm.org/D68592
llvm-svn: 374535
This reverts r366419 because the analysis performed is within the context of
the loop and it's only valid to add wrapping flags to "global" expressions if
they're always correct.
llvm-svn: 373184
At present, `-scalar-evolution-max-iterations` is a `cl::Optional`
option, which means it demands to be passed exactly zero or one times.
Our build system makes it pretty tricky to guarantee this. We often
accidentally pass the flag more than once (but always with the same
value) which results in an error, after which compilation fails:
```
clang (LLVM option parsing): for the -scalar-evolution-max-iterations option: may only occur zero or one times!
```
It seems reasonable to allow -scalar-evolution-max-iterations to be
passed more than once. Quoting the [[ http://llvm.org/docs/CommandLine.html#controlling-the-number-of-occurrences-required-and-allowed | documentation ]]:
> The cl::ZeroOrMore modifier ... indicates that your program will allow the option to be specified zero or more times.
> ...
> If an option is specified multiple times for an option of the cl::opt class, only the last value will be retained.
Original patch by: Enrico Bern Hardy Tanuwidjaja <etanuwid@fb.com>
Differential Revision: https://reviews.llvm.org/D67512
llvm-svn: 372346
We were failing to compute trip counts (both exact and maximum) for any loop which involved a comparison against either an umin or smin. It looks like this simply got missed when we added smin/umin to SCEV. (Note: umin was submitted separately earlier today. Turned out two folks hit this at the same time.)
Differential Revision: https://reviews.llvm.org/D67514
llvm-svn: 371776
This patch adds support for SCEVUMinExpr to getRangeRef,
similar to the support for SCEVUMaxExpr.
Reviewers: sanjoy.google, efriedma, reames, nikic
Reviewed By: sanjoy.google
Differential Revision: https://reviews.llvm.org/D67177
llvm-svn: 371768
Summary:
This is the first change to enable the TLI to be built per-function so
that -fno-builtin* handling can be migrated to use function attributes.
See discussion on D61634 for background. This is an enabler for fixing
handling of these options for LTO, for example.
This change should not affect behavior, as the provided function is not
yet used to build a specifically per-function TLI, but rather enables
that migration.
Most of the changes were very mechanical, e.g. passing a Function to the
legacy analysis pass's getTLI interface, or in Module level cases,
adding a callback. This is similar to the way the per-function TTI
analysis works.
There was one place where we were looking for builtins but not in the
context of a specific function. See FindCXAAtExit in
lib/Transforms/IPO/GlobalOpt.cpp. I'm somewhat concerned my workaround
could provide the wrong behavior in some corner cases. Suggestions
welcome.
Reviewers: chandlerc, hfinkel
Subscribers: arsenm, dschuff, jvesely, nhaehnle, mehdi_amini, javed.absar, sbc100, jgravelle-google, eraman, aheejin, steven_wu, george.burgess.iv, dexonsmith, jfb, asbirlea, gchatelet, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66428
llvm-svn: 371284
Without this patch computeConstantDifference returns None for cases like
these:
computeConstantDifference(%x, %x)
computeConstantDifference({%x,+,16}, {%x,+,16})
Differential Revision: https://reviews.llvm.org/D65474
llvm-svn: 368193
We haven't changed the set of users, just specialized an operand for those users. Given that, the previous wrap flags must still be correct.
Sorry for the lack of test case. Noticed this while working on something else, and haven't figured out to exercise this standalone.
llvm-svn: 365053
The previous output was next to useless if *any* exit was not computable. If we have more than one exit, show the exit count for each so that it's easier to see what's going from with SCEV analysis when debugging.
llvm-svn: 364579
This patch really contains two pieces:
Teach SCEV how to fold a phi in the header of a loop to the value on the backedge when a) the backedge is known to execute at least once, and b) the value is safe to use globally within the scope dominated by the original phi.
Teach IndVarSimplify's rewriteLoopExitValues to allow loop invariant expressions which already exist (and thus don't need new computation inserted) even in loops where we can't optimize away other uses.
Differential Revision: https://reviews.llvm.org/D63224
llvm-svn: 363619
Based on D59959, this switches SCEV to use unsigned/signed range
intersection based on the sign hint. This will prefer non-wrapping
ranges in the relevant domain. I've left the one intersection in
getRangeForAffineAR() to use the smallest intersection heuristic,
as there doesn't seem to be any obvious preference there.
Differential Revision: https://reviews.llvm.org/D60035
llvm-svn: 363490
SCEV does not propagate arguments through one-input Phis so as to make it easy for the SCEV expander (and related code) to preserve LCSSA. It's not entirely clear this restriction is neccessary, but for the moment it exists. For this reason, we don't analyze single-entry phi inputs. However it is possible that when an this input leaves the loop through LCSSA Phi, it is a provable constant. Missing that results in an order of optimization issue in loop exit value rewriting where we miss some oppurtunities based on order in which we visit sibling loops.
This patch teaches computeSCEVAtScope about this case. We can generalize it later, but so far we can only replace LCSSA Phis with their constant loop-exiting values. We should probably also add similiar logic directly in the SCEV construction path itself.
Patch by: mkazantsev (with revised commit message by me)
Differential Revision: https://reviews.llvm.org/D58113
llvm-svn: 363180
The issue is that if we have a loop with multiple predecessors outside the loop, the code was expecting to merge them and only return if equal, but instead returned the first one seen.
I have no idea if this actually tripped anywhere. I noticed it by accident when reading the code and have no idea how to go about constructing a test case.
llvm-svn: 363112
Summary:
Currently we express umin as `~umax(~x, ~y)`. However, this becomes
a problem for operands in non-integral pointer spaces, because `~x`
is not something we can compute for `x` non-integral. However, since
comparisons are generally still allowed, we are actually able to
express `umin(x, y)` directly as long as we don't try to express is
as a umax. Support this by adding an explicit umin/smin representation
to SCEV. We do this by factoring the existing getUMax/getSMax functions
into a new function that does all four. The previous two functions were
largely identical.
Reviewed By: sanjoy
Differential Revision: https://reviews.llvm.org/D50167
llvm-svn: 360159
Summary:
Commit
rL331949: SCEV] Do not use induction in isKnownPredicate for simplification umax
changed the codepath for umax from isKnownPredicate to
isKnownViaNonRecursiveReasoning to avoid compile time blow up (and as
I found out also stack overflows). However, there is an exact copy of
the code for umax that was lacking this change. In D50167 I want to unify
these codepaths, but to avoid that being a behavior change for the smax
case, pull this independent bit out of it.
Reviewed By: sanjoy
Differential Revision: https://reviews.llvm.org/D61166
llvm-svn: 359693
This reverts commit 7bf4d7c07f2fac862ef34c82ad0fef6513452445.
After thinking about this more, this isn't right, the range is not exact
in the same sense as makeExactICmpRegion(). This needs a separate
function.
llvm-svn: 358876
Eli Friedman