This change affects the non-linker script case (precisely, when the
`SECTIONS` command is not used). It deletes 3 alignments at PT_LOAD
boundaries for the default case: the size of a powerpc64 binary can be
decreased by at most 192kb. The technique can be ported to other
targets.
Let me demonstrate the idea with a maxPageSize=65536 example:
When assigning the address to the first output section of a new PT_LOAD,
if the end p_vaddr of the previous PT_LOAD is 0x10020, we advance to
the next multiple of maxPageSize: 0x20000. The new PT_LOAD will thus
have p_vaddr=0x20000. Because p_offset and p_vaddr are congruent modulo
maxPageSize, p_offset will be 0x20000, leaving a p_offset gap [0x10020,
0x20000) in the output.
Alternatively, if we advance to 0x20020, the new PT_LOAD will have
p_vaddr=0x20020. We can pick either 0x10020 or 0x20020 for p_offset!
Obviously 0x10020 is the choice because it leaves no gap. At runtime,
p_vaddr will be rounded down by pagesize (65536 if
pagesize=maxPageSize). This PT_LOAD will load additional initial
contents from p_offset ranges [0x10000,0x10020), which will also be
loaded by the previous PT_LOAD. This is fine if -z noseparate-code is in
effect or if we are not transiting between executable and non-executable
segments.
ld.bfd -z noseparate-code leverages this technique to keep output small.
This patch implements the technique in lld, which is mostly effective on
targets with large defaultMaxPageSize (AArch64/MIPS/PPC: 65536). The 3
removed alignments can save almost 3*65536 bytes.
Two places that rely on p_vaddr%pagesize = 0 have to be updated.
1) We used to round p_memsz(PT_GNU_RELRO) up to commonPageSize (defaults
to 4096 on all targets). Now p_vaddr%commonPageSize may be non-zero.
The updated formula takes account of that factor.
2) Our TP offsets formulae are only correct if p_vaddr%p_align = 0.
Fix them. See the updated comments in InputSection.cpp for details.
On targets that we enable the technique (only PPC64 now),
we can potentially make `p_vaddr(PT_TLS)%p_align(PT_TLS) != 0`
if `sh_addralign(.tdata) < sh_addralign(.tbss)`
This exposes many problems in ld.so implementations, especially the
offsets of dynamic TLS blocks. Known issues:
FreeBSD 13.0-CURRENT rtld-elf (i386/amd64/powerpc/arm64)
glibc (HEAD) i386 and x86_64 https://sourceware.org/bugzilla/show_bug.cgi?id=24606
musl<=1.1.22 on TLS Variant I architectures (aarch64/powerpc64/...)
So, force p_vaddr%p_align = 0 by rounding dot up to p_align(PT_TLS).
The technique will be enabled (with updated tests) for other targets in
subsequent patches.
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D64906
llvm-svn: 369343
R_GOTPLT is relative to .got.plt since D59594. Since R_HEXAGON_GOT
relocations always have 0 r_addend, they can use R_GOTPLT instead.
Reviewed By: sidneym
Differential Revision: https://reviews.llvm.org/D66274
llvm-svn: 369128
That allows to remove duplicated code which subtracts 0x7000 from the
R_MIPS_TLS_TPREL_XXX relocations values in the `MIPS::relocateOne`
function.
llvm-svn: 366888
This patch does the same thing as r365595 to other subdirectories,
which completes the naming style change for the entire lld directory.
With this, the naming style conversion is complete for lld.
Differential Revision: https://reviews.llvm.org/D64473
llvm-svn: 365730
This patch is mechanically generated by clang-llvm-rename tool that I wrote
using Clang Refactoring Engine just for creating this patch. You can see the
source code of the tool at https://reviews.llvm.org/D64123. There's no manual
post-processing; you can generate the same patch by re-running the tool against
lld's code base.
Here is the main discussion thread to change the LLVM coding style:
https://lists.llvm.org/pipermail/llvm-dev/2019-February/130083.html
In the discussion thread, I proposed we use lld as a testbed for variable
naming scheme change, and this patch does that.
I chose to rename variables so that they are in camelCase, just because that
is a minimal change to make variables to start with a lowercase letter.
Note to downstream patch maintainers: if you are maintaining a downstream lld
repo, just rebasing ahead of this commit would cause massive merge conflicts
because this patch essentially changes every line in the lld subdirectory. But
there's a remedy.
clang-llvm-rename tool is a batch tool, so you can rename variables in your
downstream repo with the tool. Given that, here is how to rebase your repo to
a commit after the mass renaming:
1. rebase to the commit just before the mass variable renaming,
2. apply the tool to your downstream repo to mass-rename variables locally, and
3. rebase again to the head.
Most changes made by the tool should be identical for a downstream repo and
for the head, so at the step 3, almost all changes should be merged and
disappear. I'd expect that there would be some lines that you need to merge by
hand, but that shouldn't be too many.
Differential Revision: https://reviews.llvm.org/D64121
llvm-svn: 365595
The referenced symbol is expected to point to an R_RISCV_*_HI20
relocation. An absolute symbol has no associated section, therefore
there cannot be a matching R_RISCV_*_HI20.
This fixes the crash reported by PR42038. For reference, ld.bfd errors:
(.init+0x4): dangerous relocation: %pcrel_lo missing matching %pcrel_hi
Differential Revision: https://reviews.llvm.org/D63273
llvm-svn: 365049
gcc may generate .debug_info/.debug_aranges/.debug_line/etc that are
relocated by R_RISCV_ADD*/R_RISCV_SUB* pairs.
Allow R_RISCV_ADD in non-SHF_ALLOC section to fix link errors like:
ld.lld: error: print.c:(.debug_frame+0x60): has non-ABS relocation R_RISCV_ADD64 against symbol '.L0 '
Differential Revision: https://reviews.llvm.org/D63259
llvm-svn: 365035
RISC-V psABI doesn't specify TLS relaxation. It can be handled the same
way as we handle ARM TLS. RISC-V TLS is even simpler because GD/LD use
the same relocation type.
Reviewed By: jrtc27, ruiu
Differential Revision: https://reviews.llvm.org/D63220
llvm-svn: 364813
* Handle initial relocation types: R_RISCV_CALL_PLT and R_RISCV_GOT_HI20.
* Produce dynamic relocation types: R_RISCV_COPY, R_RISCV_RELATIVE, R_RISCV_JUMP_SLOT.
* Define SymbolRel as R_RISCV_{32,64}
* Generate PLT header: it is used by lazy binding PLT in glibc.
* R_RISCV_CALL is changed from R_PC to R_PC_PLT. If the target symbol is preemptable, this will suppress an unnecessary "canonical PLT".
This behavior is different from ld.bfd but it is agreed the current lld behavior is favored.
I have received positive responses from the binutils maintainer that the ABI/binutils implementation can be improved, see:
https://github.com/riscv/riscv-elf-psabi-doc/issues/98https://sourceware.org/bugzilla/show_bug.cgi?id=24685
Many -no-pie/-pie/-shared programs linked against musl or glibc should work with this patch.
Reviewed By: jrtc27
Differential Revision: https://reviews.llvm.org/D63076
llvm-svn: 364812
This restores r361830 "[ELF] Error on relocations to STT_SECTION symbols if the sections were discarded"
and dependent commits (r362218, r362497) which were reverted by r364321, with a fix of a --gdb-index issue.
.rela.debug_ranges contains relocations of range list entries:
// start address of a range list entry
// old: 0; after r361830: 0
00000000000033a0 R_X86_64_64 .text._ZN2v88internal7Isolate7factoryEv + 0
// end address of a range list entry
// old: 0xe; after r361830: 0
00000000000033a8 R_X86_64_64 .text._ZN2v88internal7Isolate7factoryEv + e
If both start and end addresses of a range list entry resolve to 0,
DWARFDebugRangeList::isEndOfListEntry() will return true, then the
.debug_range decoding loop will terminate prematurely:
while (true) {
decode StartAddress
decode EndAddress
if (Entry.isEndOfListEntry()) // prematurely
break;
Entries.push_back(Entry);
}
In lld/ELF/SyntheticSections.cpp, readAddressAreas() will read
incomplete address ranges and the resulting .gdb_index will be
incomplete. For files that gdb hasn't loaded their debug info, gdb uses
.gdb_index to map addresses to CUs. The absent entries make gdb fail to
symbolize some addresses.
To address this issue, we simply allow relocations to undefined symbols
in DWARF.cpp:findAux() and let RelocationResolver resolve them.
This patch should fix:
[1] http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20190603/659848.html
[2] https://bugs.chromium.org/p/chromium/issues/detail?id=978067
llvm-svn: 364391
(In effect, reverting "[ELF] Error on relocations to STT_SECTION symbols if the sections were discarded".)
It caused debug info problems in LibreOffice [1] and Chromium/V8 [2].
Reverting until those can be fixed.
It also reverts r362497 "STT_SECTION symbol should be defined" on .eh_frame, .debug*, .zdebug* and .gcc_except_table"
which was landed as a follow-up to the above.
> With -r or --emit-relocs, we warn `STT_SECTION symbol should be defined`
> on relocations to discarded section symbol. This was added as an error
> in rLLD319404, but was not so effective before D61583 (it turned the
> error to a warning).
>
> Relocations from .eh_frame .debug* .zdebug* .gcc_except_table to
> discarded .text are very common and somewhat expected. Don't warn/error
> on them. As a reference, ld.bfd has a similar logic in
> _bfd_elf_default_action_discarded() to allow these cases.
>
> Delete invalid-undef-section-symbol.test because what it intended to
> check is now covered by the updated comdat-discarded-reloc.s
>
> Delete relocatable-eh-frame.s because we allow relocations from
> .eh_frame as a special case now.
And finally it reverts r362218 "[ELF] Replace a dead test in getSymVA() with assert()"
as that also depended on the main change reverted here.
> Symbols relative to discarded comdat sections are Undefined instead of
> Defined now (after D59649 and D61583). The `== &InputSection::Discarded`
> test becomes dead. I cannot find a test related to this behavior.
[1] http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20190603/659848.html
[2] https://bugs.chromium.org/p/chromium/issues/detail?id=978067
llvm-svn: 364321
R_RISCV_{ADD,SET,SUB}* are used for local label computation.
Add a new RelExpr member R_RISCV_ADD to represent them.
R_RISCV_ADD is treated as a link-time constant because otherwise
R_RISCV_{ADD,SET,SUB}* are not allowed in -pie/-shared mode.
In glibc Scrt1.o, .rela.eh_frame contains such relocations.
Because .eh_frame is not writable, we get this error:
ld.lld: error: can't create dynamic relocation R_RISCV_ADD32 against symbol: .L0 in readonly segment; recompil object files with -fPIC or pass '-Wl,-z,notext' to allow text relocations in the output
>>> defined in ..../riscv64-linux-gnu/lib/Scrt1.o
With D63076 and this patch, I can run -pie/-shared programs linked against glibc.
Note llvm-mc cannot currently produce R_RISCV_SET* so they are not tested.
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D63183
llvm-svn: 363128
Summary:
clang (as of 2019-06-12) / gcc (as of 8.2.1) PPC64 may emit a .rela.toc
which references an embedded switch table in a discarded .rodata/.text
section. The .toc and the .rela.toc are incorrectly not placed in the
comdat.
Technically a relocation from outside the group is not allowed by the ELF spec:
> A symbol table entry with STB_LOCAL binding that is defined relative
> to one of a group's sections, and that is contained in a symbol table
> section that is not part of the group, must be discarded if the group
> members are discarded. References to this symbol table entry from
> outside the group are not allowed.
Don't report errors to work around the bug.
This should fix the ppc64le-lld-multistage-test bot while linking llvm-tblgen:
ld.lld: error: relocation refers to a discarded section: .rodata._ZNK4llvm3MVT13getSizeInBitsEv
>>> defined in utils/TableGen/CMakeFiles/llvm-tblgen.dir/CodeGenRegisters.cpp.o
>>> referenced by CodeGenRegisters.cpp
>>> utils/TableGen/CMakeFiles/llvm-tblgen.dir/CodeGenRegisters.cpp.o:(.toc+0x0)
Some other PPC specific sections may have similar problems. We can blacklist more
section names when problems occur.
// A simple program that reproduces the bug.
// Note .rela.toc (outside the group) references a section symbol (STB_LOCAL) in a group.
void puts(const char *);
struct A {
void foo(int a) {
switch (a) {
case 0: puts("0"); break;
case 1: puts("1"); puts("1"); break;
case 2: puts("2"); break;
case 3: puts("3"); puts("4"); break;
case 4: puts("4"); break;
case 5: puts("5"); puts("5"); break;
case 6: puts("6"); break;
}
}
int a;
};
void foo(A x) { x.foo(x.a); }
Reviewers: ruiu, sfertile, espindola
Reviewed By: ruiu
Subscribers: emaste, nemanjai, arichardson, kbarton, jsji, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63182
llvm-svn: 363126
Many -static/-no-pie/-shared/-pie applications linked against glibc or musl
should work with this patch. This also helps FreeBSD PowerPC64 to migrate
their lib32 (PR40888).
* Fix default image base and max page size.
* Support new-style Secure PLT (see below). Old-style BSS PLT is not
implemented, so it is not suitable for FreeBSD rtld now because it doesn't
support Secure PLT yet.
* Support more initial relocation types:
R_PPC_ADDR32, R_PPC_REL16*, R_PPC_LOCAL24PC, R_PPC_PLTREL24, and R_PPC_GOT16.
The addend of R_PPC_PLTREL24 is special: it decides the call stub PLT type
but it should be ignored for the computation of target symbol VA.
* Support GNU ifunc
* Support .glink used for lazy PLT resolution in glibc
* Add a new thunk type: PPC32PltCallStub that is similar to PPC64PltCallStub.
It is used by R_PPC_REL24 and R_PPC_PLTREL24.
A PLT stub used in -fPIE/-fPIC usually loads an address relative to
.got2+0x8000 (-fpie/-fpic code uses _GLOBAL_OFFSET_TABLE_ relative
addresses).
Two .got2 sections in two object files have different addresses, thus a PLT stub
can't be shared by two object files. To handle this incompatibility,
change the parameters of Thunk::isCompatibleWith to
`const InputSection &, const Relocation &`.
PowerPC psABI specified an old-style .plt (BSS PLT) that is both
writable and executable. Linkers don't make separate RW- and RWE segments,
which causes all initially writable memory (think .data) executable.
This is a big security concern so a new PLT scheme (secure PLT) was developed to
address the security issue.
TLS will be implemented in D62940.
glibc older than ~2012 requires .rela.dyn to include .rela.plt, it can
not handle the DT_RELA+DT_RELASZ == DT_JMPREL case correctly. A hack
(not included in this patch) in LinkerScript.cpp addOrphanSections() to
work around the issue:
if (Config->EMachine == EM_PPC) {
// Older glibc assumes .rela.dyn includes .rela.plt
Add(In.RelaDyn);
if (In.RelaPlt->isLive() && !In.RelaPlt->Parent)
In.RelaDyn->getParent()->addSection(In.RelaPlt);
}
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D62464
llvm-svn: 362721
Summary:
With -r or --emit-relocs, we warn `STT_SECTION symbol should be defined`
on relocations to discarded section symbol. This was added as an error
in rLLD319404, but was not so effective before D61583 (it turned the
error to a warning).
Relocations from .eh_frame .debug* .zdebug* .gcc_except_table to
discarded .text are very common and somewhat expected. Don't warn/error
on them. As a reference, ld.bfd has a similar logic in
_bfd_elf_default_action_discarded() to allow these cases.
Delete invalid-undef-section-symbol.test because what it intended to
check is now covered by the updated comdat-discarded-reloc.s
Delete relocatable-eh-frame.s because we allow relocations from
.eh_frame as a special case now.
Reviewers: grimar, phosek, ruiu, espindola
Reviewed By: ruiu
Subscribers: emaste, arichardson, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62840
llvm-svn: 362497
The following abstract relocation types (RelExpr) are PPC64 ELFv2 ABI specific,
not used by PPC32. So rename them to prevent confusion when the PPC32 port is improved.
* R_PPC_CALL R_PPC_CALL_PLT:
R_PPC_CALL_PLT represents R_PPC64_REL14 and R_PPC64_REL24.
If the function is not preemptable, R_PPC_CALL_PLT can be optimized to R_PPC_CALL:
the formula adjusts the symbol VA from the global entry point to the local entry point.
* R_PPC_TOC: represents R_PPC64_TOC. We don't have a test. Add one to ppc64-relocs.s
Rename it to R_PPC64_TOCBASE because `@tocbase` is the assembly form.
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D62800
llvm-svn: 362359
For the Local Dynamic case of TLSDESC, _TLS_MODULE_BASE_ is defined as a
special TLS symbol that makes:
1) Without relaxation: it produces a dynamic TLSDESC relocation that
computes 0. Adding @dtpoff to access a TLS symbol.
2) With LD->LE relaxation: _TLS_MODULE_BASE_@tpoff = 0 (lowest address in
the TLS block). Adding @tpoff to access a TLS symbol.
For 1), this saves dynamic relocations and GOT slots as otherwise
(General Dynamic) we would create an R_X86_64_TLSDESC and reserve two
GOT slots for each symbol.
Add ElfSym::TlsModuleBase and change the signature of getTlsTpOffset()
to special case _TLS_MODULE_BASE_.
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D62577
llvm-svn: 362078
This change causes us to read partition specifications from partition
specification sections and split output sections into partitions according
to their reachability from partition entry points.
This is only the first step towards a full implementation of partitions. Later
changes will add additional synthetic sections to each partition so that
they can be loaded independently.
Differential Revision: https://reviews.llvm.org/D60353
llvm-svn: 361925
This handles two initial relocation types R_X86_64_GOTPC32_TLSDESC and
R_X86_64_TLSDESC_CALL, as well as the GD->LE and GD->IE relaxations.
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D62513
llvm-svn: 361911
This is implemented by creating Undefined (instead of Defined) for such
local STT_SECTION symbols. It allows us to catch errors when there are
relocations to such discarded sections (e.g. in PR41693, ld.bfd and gold
error but we don't). Updated comdat-discarded-error.s checks we emit
friendly error message.
For relocatable-eh-frame.s, ld.lld -r a.o a.o will now error
"STT_SECTION symbol should be defined" because the section .eh_frame
refers to is now an Undefined instead of a Defined.
So I have to change `error()` to `warn()` to retain the output.
rLLD361144 inadvertently enabled the error for --gdb-index
(in LLDDwarfObj<ELFT>::findAux()).
Relocations from .debug_info (not in comdat) to .text.* (in comdat) for
DW_AT_low_pc are common. If an .text.* was discarded, rLLD361144 would error,
which was unexpected. (Note, if we don't error as this patch does,
InputSection::relocateNonAlloc() will resolve such relocations).
llvm-svn: 361830
This is implemented by creating Undefined (instead of Defined) for such
local STT_SECTION symbols. It allows us to catch errors when there are
relocations to such discarded sections (e.g. in PR41693, ld.bfd and gold
error but we don't). Updated comdat-discarded-error.s checks we emit
friendly error message.
For relocatable-eh-frame.s, ld.lld -r a.o a.o will now error
"STT_SECTION symbol should be defined" because the section .eh_frame
refers to is now an Undefined instead of a Defined.
So I have to change `error()` to `warn()` to retain the output.
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D61583
llvm-svn: 361792
For R_TLS:
1) Delete Sym.isTls() . The assembler ensures the symbol is STT_TLS.
If not (the input is broken), we would crash (dereferencing null Out::TlsPhdr).
2) Change Sym.isUndefWeak() to Sym.isUndefined(), otherwise with --noinhibit-exec
we would still evaluate the symbol and crash.
3) Return A if the symbol is undefined. This is PR40570.
The case is probably unrealistic but returning A matches R_ABS and the
behavior of several dynamic loaders.
R_NEG_TLS is obsoleted Sun TLS we don't fully support, but
R_RELAX_TLS_GD_TO_LE_NEG is still used by GD->LE relaxation (subl $var@tpoff,%eax).
They should add the addend. Unfortunately I can't test it as compilers don't seem to generate non-zero implicit addends.
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D62098
llvm-svn: 361146
This reverts D53906.
D53906 increased p_align of PT_TLS on ARM/AArch64 to 32/64 to make the
static TLS layout compatible with Android Bionic's ELF TLS. However,
this may cause glibc ARM/AArch64 programs to crash (see PR41527).
The faulty PT_TLS in the executable satisfies p_vaddr%p_align != 0. The
remainder is normally 0 but may be non-zero with the hack in place. The
problem is that we increase PT_TLS's p_align after OutputSections'
addresses are fixed (assignAddress()). It is possible that
p_vaddr%old_p_align = 0 while p_vaddr%new_p_align != 0.
For a thread local variable defined in the executable, lld computed TLS
offset (local exec) is different from glibc computed TLS offset from
another module (initial exec/generic dynamic). Note: PR41527 said the
bug affects initial exec but actually generic dynamic is affected as
well.
(glibc is correct in that it compute offsets that satisfy
`offset%p_align == p_vaddr%p_align`, which is a basic ELF requirement.
This hack appears to work on FreeBSD rtld, musl<=1.1.22, and Bionic, but
that is just because they (and lld) incorrectly compute offsets that
satisfy `offset%p_align = 0` instead.)
Android developers are fine to revert this patch, carry this patch in
their tree before figuring out a long-term solution (e.g. a dummy .tdata
with sh_addralign=64 sh_size={0,1} in crtbegin*.o files. The overhead is
now insignificant after D62059).
Reviewed By: rprichard, srhines
Differential Revision: https://reviews.llvm.org/D62055
llvm-svn: 361090
After D62059, we don't align p_memsz of PT_TLS to p_align. The
getRelocTargetVA formula should align it instead.
It becomes clear that R_NEG_TLS and R_TLS are opposite from each other.
In i386-tls-le-align.s, I put ret after call ___tls_get_addr@plt as
otherwise ld.bfd would reject the relaxation:
TLS transition from R_386_TLS_GD to R_386_TLS_LE_32 against `a' at 0x3 in section `.text' failed
llvm-svn: 361088
As Ryan Prichard pointed out, after D62059, the TP offset is incorrect.
Add x86-64-tls-le-align.s to check this. Better formulae for both
variants should take p_vaddr%p_align into account (offset%p_align =
p_vaddr%p_align is a basic ELF requirement), but I can't find a way to
test the behavior.
llvm-svn: 361084
On Elf*_Rel targets, for a relocation to a section symbol, an R_ABS is
added which will be used by relocateOne() to compute the implicit
addend.
Addends of R_*_NONE should be ignored, so don't emit an R_ABS.
This fixes crashes on X86 and ARM because their relocateOne() do not
handle R_*_NONE.
Reviewed By: peter.smith
Differential Revision: https://reviews.llvm.org/D62052
llvm-svn: 361036
The change broke some scenarios where debug information is still
needed, although MarkLive cannot see it, including the
Chromium/Android build. Reverting to unbreak that build.
llvm-svn: 360955
This is based on D54720 by Sean Fertile.
When accessing a global symbol which is not defined in the translation unit,
compilers will generate instructions that load the address from the toc entry.
If the symbol is defined, non-preemptable, and addressable with a 32-bit
signed offset from the toc pointer, the address can be computed
directly. e.g.
addis 3, 2, .LC0@toc@ha # R_PPC64_TOC16_HA
ld 3, .LC0@toc@l(3) # R_PPC64_TOC16_LO_DS, load the address from a .toc entry
ld/lwa 3, 0(3) # load the value from the address
.section .toc,"aw",@progbits
.LC0: .tc var[TC],var
can be relaxed to
addis 3,2,var@toc@ha # this may be relaxed to a nop,
addi 3,3,var@toc@l # then this becomes addi 3,2,var@toc
ld/lwa 3, 0(3) # load the value from the address
We can delete the test ppc64-got-indirect.s as its purpose is covered by
newly added ppc64-toc-relax.s and ppc64-toc-relax-constants.s
Reviewed By: ruiu, sfertile
Differential Revision: https://reviews.llvm.org/D60958
llvm-svn: 360112
Summary:
We use `uint32_t SectionBase::Alignment` and `uint32_t
PhdrEntry::p_align` despite alignments being 64 bits in ELF64.
Fix the std::max template arguments accordingly.
The currently 160-byte InputSection will become 168 bytes if we make SectionBase::Alignment uint64_t.
Differential Revision: https://reviews.llvm.org/D61171
llvm-svn: 359268
Summary:
Fixes PR35242. A simplified reproduce:
thread_local int i; int f() { return i; }
% {g++,clang++} -fPIC -shared -ftls-model=local-dynamic -fuse-ld=lld a.cc
ld.lld: error: can't create dynamic relocation R_X86_64_DTPOFF32 against symbol: i in readonly segment; recompile object files with -fPIC or pass '-Wl,-z,notext' to allow text relocations in the output
In isStaticLinkTimeConstant(), Syn.IsPreemptible is true, so it is not
seen as a constant. The error is then issued in processRelocAux().
A symbol of the local-dynamic TLS model cannot be preempted but it can
preempt symbols of the global-dynamic TLS model in other DSOs.
So it makes some sense that the variable is not static.
This patch fixes the linking error by changing getRelExpr() on
R_386_TLS_LDO_32 and R_X86_64_DTPOFF{32,64} from R_ABS to R_DTPREL.
R_PPC64_DTPREL_* and R_MIPS_TLS_DTPREL_* need similar fixes, but they are not handled in this patch.
As a bonus, we use `if (Expr == R_ABS && !Config->Shared)` to find
ld-to-le opportunities. R_ABS is overloaded here for such STT_TLS symbols.
A dedicated R_DTPREL is clearer.
Differential Revision: https://reviews.llvm.org/D60945
llvm-svn: 358870
Summary:
This relocation type is used by R_386_TLS_GD. Its formula is the same as
R_GOTPLT (e.g R_X86_64_GOT{32,64} R_386_TLS_GOTIE). Rename it to be clearer.
Differential Revision: https://reviews.llvm.org/D60941
llvm-svn: 358868
Patch by Robert O'Callahan.
Rust projects tend to link in all object files from all dependent
libraries and rely on --gc-sections to strip unused code and data.
Unfortunately --gc-sections doesn't currently strip any debuginfo
associated with GC'ed sections, so lld links in the full debuginfo from
all dependencies even if almost all that code has been discarded. See
https://github.com/rust-lang/rust/issues/56068 for some details.
Properly stripping debuginfo for discarded sections would be difficult,
but a simple approach that helps significantly is to mark debuginfo
sections as live only if their associated object file has at least one
live code/data section. This patch does that. In a (contrived but not
totally artificial) Rust testcase linked above, it reduces the final
binary size from 46MB to 5.1MB.
Differential Revision: https://reviews.llvm.org/D54747
llvm-svn: 358069
Summary:
This should address remaining issues discussed in PR36555.
Currently R_GOT*_FROM_END are exclusively used by x86 and x86_64 to
express relocations types relative to the GOT base. We have
_GLOBAL_OFFSET_TABLE_ (GOT base) = start(.got.plt) but end(.got) !=
start(.got.plt)
This can have problems when _GLOBAL_OFFSET_TABLE_ is used as a symbol, e.g.
glibc dl_machine_dynamic assumes _GLOBAL_OFFSET_TABLE_ is start(.got.plt),
which is not true.
extern const ElfW(Addr) _GLOBAL_OFFSET_TABLE_[] attribute_hidden;
return _GLOBAL_OFFSET_TABLE_[0]; // R_X86_64_GOTPC32
In this patch, we
* Change all GOT*_FROM_END to GOTPLT* to fix the problem.
* Add HasGotPltOffRel to denote whether .got.plt should be kept even if
the section is empty.
* Simplify GotSection::empty and GotPltSection::empty by setting
HasGotOffRel and HasGotPltOffRel according to GlobalOffsetTable early.
The change of R_386_GOTPC makes X86::writePltHeader simpler as we don't
have to compute the offset start(.got.plt) - Ebx (it is constant 0).
We still diverge from ld.bfd (at least in most cases) and gold in that
.got.plt and .got are not adjacent, but the advantage doing that is
unclear.
Reviewers: ruiu, sivachandra, espindola
Subscribers: emaste, mehdi_amini, arichardson, dexonsmith, jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59594
llvm-svn: 356968
This shaves another word off SectionBase and makes it possible to clone a
section using the implicit copy constructor.
This basically reverts r311056, which removed the mutex in order to
make the code easier to understand. On balance I think it's probably more
straightforward to have a mutex here than to have an unusual copy constructor
in SectionBase.
Differential Revision: https://reviews.llvm.org/D59269
llvm-svn: 355966
This patch removes the precompiled binary from inputs,
replacing it with a YAML. And teaches LLD to report a
section name in case of such error.
Differential revision: https://reviews.llvm.org/D58670
llvm-svn: 354959
Previously, we showed the following message for an unknown relocation:
foo.o: unrecognized reloc 256
This patch improves it so that the error message includes a symbol name:
foo.o: unknown relocation (256) against symbol bar
llvm-svn: 354040
Non-GOT non-PLT relocations to non-preemptible ifuncs result in the
creation of a canonical PLT, which now takes the identity of the IFUNC
in the symbol table. This (a) ensures address consistency inside and
outside the module, and (b) fixes a bug where some of these relocations
end up pointing to the resolver.
Fixes (at least) PR40474 and PR40501.
Differential Revision: https://reviews.llvm.org/D57371
llvm-svn: 353981
Fangrui Song