a98fde5d70
<rdar://problem/11819635>
...
llvm-svn: 159844
2012-07-06 17:58:01 +00:00
ec440dd774
Since SBTarget::FindFunctions returns a
...
SBSymbolContextList, we should include the
relevant header file.
llvm-svn: 159840
2012-07-06 17:44:41 +00:00
5d261b0601
Fix a wrong variable name.
...
llvm-svn: 159832
2012-07-06 16:20:13 +00:00
85da312d00
Change the "run" / "r" command alias to not use --shell for lldb
...
running natively on arm - on iOS we have to do some extra work to
track the inferior process if we launch with a shell intermediary.
<rdar://problem/11719396>
llvm-svn: 159803
2012-07-06 02:46:23 +00:00
84d32ddfc8
Bump versions to lldb-161, debugserver-188.
...
llvm-svn: 159798
2012-07-06 01:32:10 +00:00
a96ba8768b
<rdar://problem/11806995>
...
Need to include QA MAS certificate leaf for root XPC service
llvm-svn: 159782
2012-07-05 21:46:53 +00:00
39cacebd26
Added a new example that extracts all global variables from an object file and prints any available info.
...
llvm-svn: 159775
2012-07-05 20:24:41 +00:00
585c0ec8e1
Fixed a potential crash if a metadata category
...
we write into doesn't already exist.
<rdar://problem/11775508>
llvm-svn: 159700
2012-07-04 01:26:26 +00:00
43c555dfcd
Work around some problems destroying a process with older debugservers.
...
rdar://problem/11359989
llvm-svn: 159697
2012-07-04 00:35:43 +00:00
f7ab038ada
Make the interactive command interpreter build into the "crashlog" command work correctly when run inside LLDB. Before this fix the "cmd.Cmd" object was trying to read from stdin itself and it was competing without command interpreter for the bytes.
...
llvm-svn: 159688
2012-07-03 21:40:18 +00:00
c8a0ce0a7a
<rdar://problem/11800213>
...
Fixed a crasher in the "thread continue" code. There were many logic errors in the DoExecute function where thread index IDs were being used where the actual zero based thread index should have been used. This could cause crashes to happen since looking up a thread by index ID, when the zero based index of a thread should be used would return an empty thread shared pointer and cause a NULL deref.
llvm-svn: 159686
2012-07-03 20:54:16 +00:00
d7331f2acb
Improved the name comparing logic a bit.
...
llvm-svn: 159685
2012-07-03 20:52:00 +00:00
1f5181aa45
<rdar://problem/11744001>
...
Fixed an issue where GDB servers that don't support the thread suffix could get registers states incorrectly due to an incorrect assumption that the current register thread (set using the "Hg%x" packet) will always be cached between runs. Now we clear the cached register thred when the process is resumed.
llvm-svn: 159603
2012-07-02 22:05:25 +00:00
03afad8f1e
Add an "extra-startup-commands" process setting so we can send some command strings to the actual process plugin to interpret as it wishes.
...
llvm-svn: 159511
2012-07-02 05:40:07 +00:00
5ef31a9c46
Added documentation for many of our python properties and also made the property help show up by declaring the properties correctly. We previosly declared properties into a local "x" variable, what I didn't realize is that the help will use this as the property name for the help output.
...
llvm-svn: 159468
2012-06-29 22:00:42 +00:00
9a69ac5d67
Spelling fixes.
...
llvm-svn: 159467
2012-06-29 21:58:52 +00:00
503cd42259
Spelling fixes.
...
llvm-svn: 159466
2012-06-29 21:58:00 +00:00
cbeddfeed7
Make 'watchpoint set' default to write instead of read_write.
...
llvm-svn: 159455
2012-06-29 19:35:01 +00:00
3e3b48e669
Added information on how to get API documentation in a "Documentation" section.
...
llvm-svn: 159434
2012-06-29 16:25:05 +00:00
2e6dea3928
<rdar://problem/11755446> Making sure to provide summaries for one more NSString subclass
...
llvm-svn: 159389
2012-06-28 23:05:43 +00:00
98d6da5f7c
Make the error message when we time out waiting for debugserver to reply to the qLaunchSuccess packet less cryptic.
...
<rdar://problem/11754744>
llvm-svn: 159373
2012-06-28 20:30:23 +00:00
a7fb1dcd4b
Listen to the "--verbose" flag when running "crashlog" and if verbose is enabled, then dump full paths to source files and modules.
...
Changed much of the output that was coming out with "--verbose" over to use the new "--debug" flag.
llvm-svn: 159363
2012-06-28 18:10:14 +00:00
20351ea310
Fixed a logic error which stopped paths from being properly remapped.
...
llvm-svn: 159362
2012-06-28 18:09:12 +00:00
fe251c88d9
Added a new top level "Resources" group for plist files and moved a few dylib and .a files into the "Libraries" group.
...
llvm-svn: 159323
2012-06-28 01:28:49 +00:00
c76715f3be
<rdar://problem/11679380> Make sure we do not fallback to software stepping when hardware stepping should work but fails to get enabled. Also removing dead code paths
...
llvm-svn: 159322
2012-06-28 01:23:30 +00:00
fed39aa653
Added the ability to read the dSYM plist file with source remappings even when DebugSymbols isn't used to find the dSYM. We now parse the plist as XML in the MacOSX symbol vendor.
...
Added the ability to get a section load address given a target which is needed for a previous checking which saves crashlogs.
llvm-svn: 159298
2012-06-27 22:22:28 +00:00
234076c429
Fixed the "target modules list" to not crash in Debug builds due to an assertion where the mutex in the "module_list" local variable would assert when the lldb_private::Mutex would destruct. What was happening was the mutex in the module list was being locked by a local locker object and then "module_list" would get destroyed before the locker and the locker still had the mutex locked which would cause the pthread call to destroy the mutex to fail with "Resource busy" and it would cause a mutex leak.
...
llvm-svn: 159291
2012-06-27 20:26:19 +00:00
8567355e8c
Modify the ranges_access() helper function to be able to lookup the address range in a block given an address. Since blocks can have multiple discontiguous ranges, it helps to be able to get the current address range for the current block in a frame. This can be used in code like:
...
curr_block_range = lldb.frame.block.range[lldb.frame.addr]
llvm-svn: 159289
2012-06-27 20:23:09 +00:00
3e6dde6652
Fixed the get_process_thread_list function to correctly return a list of all threads in a process.
...
llvm-svn: 159288
2012-06-27 20:19:56 +00:00
febc8bb479
Make the IsValid() operator for SBLineEntry "do the right thing" by returning true if the line entry is valid, not just if the opaque pointer to lldb_private::LineEntry is non NULL.
...
llvm-svn: 159287
2012-06-27 20:18:01 +00:00
f47b2c26bb
Added a "save_crashlog" command to the lldb.macosx.crashlog package that allow you to dump your current process state out to a crash log file. This will dump all of the target module information with all load addresses, UUID values, and shared library paths, as well as all thread stacks and the crash log header. This will make it easy for us to save the current state of a process and then reload it later into LLDB.
...
llvm-svn: 159286
2012-06-27 20:02:04 +00:00
8921ce8396
Fix the copy constructor and assignement operator for ModuleList to be thread safe.
...
llvm-svn: 159285
2012-06-27 19:59:26 +00:00
89d4f338a7
Check the return status of the make command.
...
llvm-svn: 159284
2012-06-27 19:57:59 +00:00
5b889eec4a
Remove dependency on internal header file.
...
llvm-svn: 159283
2012-06-27 19:57:13 +00:00
70f11f88e3
Make a way to set the result status for Python defined commands, and don't overwrite the status of the result if
...
the python command has set it.
llvm-svn: 159273
2012-06-27 17:25:36 +00:00
0fd1b75f50
Fix ignore counts on breakpoints so they actually work.
...
llvm-svn: 159233
2012-06-26 22:27:55 +00:00
389512dc5e
Add API logging to SBCommandInterpreter::HandleCompletion().
...
llvm-svn: 159180
2012-06-26 01:21:59 +00:00
bc1d7f7a6a
The StepOverBreakpoint plan should only explain eStopReasonTrace. It didn't cause any other exceptional stop reason.
...
llvm-svn: 159031
2012-06-22 20:42:22 +00:00
2f42bb03b7
DNBLogThreadedIf already inserts a newline
...
llvm-svn: 158995
2012-06-22 13:54:32 +00:00
f813086c85
Additional comment in ObjectFileMachO::ParseSymtab to explain
...
the layout of the dyld shared cache file and how we're stepping
through it; also use offsetof to find offsets of struct elements.
llvm-svn: 158962
2012-06-22 03:28:35 +00:00
a5609c8588
Preliminary set of changes to ObjectFileMachO::ParseSymtab when lldb
...
is being run on iOS natively and we are examining a binary that is
in the shared-cache. The shared cache may be set up to not load the
symbol names in memory (and may be missing some local symbols entirely,
to boot) so we need to read the on-disk-but-not-mapped-into-memory cache
of symbol names/symbols before we start processing the in-memory nlist
entries.
This code needs to be reorganized into its own separate method, ideally
we'll find some way to not duplicate the nlist symbol handling. But
we need to handle this new format quickly and we'll clean up later.
Thanks for James McIlree for the patch. Fixes <rdar://problem/11639018>.
llvm-svn: 158891
2012-06-21 01:51:02 +00:00
06bca9ed0e
Bump version number to lldb-160.
...
llvm-svn: 158890
2012-06-21 01:41:15 +00:00
0eec15acf2
Continue the cleanup started on r158737
...
Adds a utility class method to TestBase that checks and removes a temp
file.
Removed every use of system() to execute rm -f.
llvm-svn: 158809
2012-06-20 10:13:40 +00:00
1773a89ff4
Chnage VerifyWatchpointIDs() from a static function to a class function to be called from other source files.
...
llvm-svn: 158751
2012-06-19 22:12:58 +00:00
59ceee7933
Test suite cleanup: use Python API to remove files as part of cleanup instead of running OS commands.
...
llvm-svn: 158737
2012-06-19 20:29:50 +00:00
9a63cfaf8d
rdar://problem/11649610
...
lldb confused by single quote in executable path
Also add a test case.
llvm-svn: 158693
2012-06-19 00:56:55 +00:00
be4e208103
rdar://problem/11390100
...
debugserver needs to be able to posix_spawn debugging apps that have ".app" in their path that aren't bundles
llvm-svn: 158327
2012-06-11 21:05:26 +00:00
b68c2d96ce
Incorporate suggestions from Jim, add "USING LLDB" and "FILES" sections.
...
llvm-svn: 158246
2012-06-08 23:49:32 +00:00
4ceb928f02
Change the Mutex::Locker class so that it takes the Mutex object and locks it, rather
...
than being given the pthread_mutex_t from the Mutex and locks that. That allows us to
track ownership of the Mutex better.
Used this to switch the LLDB_CONFIGURATION_DEBUG enabled assert when we can't get the
gdb-remote sequence mutex to assert when the thread that had the mutex releases it. This
is generally more useful information than saying just who failed to get it (since the
code that had it locked often had released it by the time the assert fired.)
llvm-svn: 158240
2012-06-08 22:50:40 +00:00
e3333d69db
Minor fixes for ARM/iOS targets:
...
- On iOS, we select the "apcs-gnu" ABI to match
what libraries expect.
- Literals are now allocated at their preferred
alignment, eliminating many alignment crashes.
llvm-svn: 158236
2012-06-08 22:20:41 +00:00
Greg Clayton