Commit Graph

5887 Commits

Author SHA1 Message Date
Chandler Carruth d31370e060 Temporarily revert r187323 until I update SSAUpdater to match mem2reg.
I forgot that we had two totally independent things here. :: sigh ::

llvm-svn: 187327
2013-07-28 09:05:49 +00:00
Chandler Carruth 9d96100ff0 Now that mem2reg understands how to cope with a slightly wider set of
uses of an alloca, we can pre-compute promotability while analyzing an
alloca for splitting in SROA. That lets us short-circuit the common case
of a bunch of trivially promotable allocas. This cuts 20% to 30% off the
run time of SROA for typical frontend-generated IR sequneces I'm seeing.
It gets the new SROA to within 20% of ScalarRepl for such code. My
current benchmark for these numbers is PR15412, but it fits the general
pattern of IR emitted by Clang so it should be widely applicable.

llvm-svn: 187323
2013-07-28 08:27:12 +00:00
Chandler Carruth d5b806a27f Thread DataLayout through the callers and into mem2reg. This will be
useful in a subsequent patch, but causes an unfortunate amount of noise,
so I pulled it out into a separate patch.

llvm-svn: 187322
2013-07-28 06:43:11 +00:00
Chandler Carruth 8e3c4dc50e Don't use all the #ifdefs to hide the stats counters and instead rely on
their being optimized out in debug mode. Realistically, this just isn't
going to be the slow part anyways. This also fixes unused variable
warnings that are breaking LLD build bots. =/ I didn't see these at
first, and kept losing track of the fact that they were broken.

llvm-svn: 187297
2013-07-27 10:17:49 +00:00
Nick Lewycky 0b68245ec8 Reimplement isPotentiallyReachable to make nocapture deduction much stronger.
Adds unit tests for it too.

Split BasicBlockUtils into an analysis-half and a transforms-half, and put the
analysis bits into a new Analysis/CFG.{h,cpp}. Promote isPotentiallyReachable
into llvm::isPotentiallyReachable and move it into Analysis/CFG.

llvm-svn: 187283
2013-07-27 01:24:00 +00:00
Tom Stellard 8b1e021e85 SimplifyCFG: Use parallel-and and parallel-or mode to consolidate branch conditions
Merge consecutive if-regions if they contain identical statements.
Both transformations reduce number of branches.  The transformation
is guarded by a target-hook, and is currently enabled only for +R600,
but the correctness has been tested on X86 target using a variety of
CPU benchmarks.

Patch by: Mei Ye

llvm-svn: 187278
2013-07-27 00:01:07 +00:00
Benjamin Kramer 328da33d19 TRE: Move class into anonymous namespace.
While there shrink a dangerously large SmallPtrSet.

llvm-svn: 187050
2013-07-24 16:12:08 +00:00
Chandler Carruth 58e25d3905 Fix a problem I introduced in r187029 where we would over-eagerly
schedule an alloca for another iteration in SROA. This only showed up
with a mixture of promotable and unpromotable selects and phis. Added
a test case for this.

llvm-svn: 187031
2013-07-24 12:12:17 +00:00
Chandler Carruth 83ea195d40 Fix PR16687 where we were incorrectly promoting an alloca that had
pending speculation for a phi node. The problem here is that we were
using growth of the specluation set as an indicator of whether
speculation would occur, and if the phi node is already in the set we
don't see it grow. This is a symptom of the fact that this signal is
a total hack.

Unfortunately, I couldn't really come up with a non-hacky way of
signaling that promotion remains valid *after* speculation occurs, such
that we only speculate when all else looks good for promotion. In the
end, I went with at least a much more explicit approach of doing the
work of queuing inside the phi and select processing and setting
a preposterously named flag to convey that we're in the special state of
requiring speculating before promotion.

Thanks to Richard Trieu and Nick Lewycky for the excellent work reducing
a testcase for this from a pretty giant, nasty assert in a big
application. =] The testcase was excellent.

llvm-svn: 187029
2013-07-24 09:47:28 +00:00
Nick Lewycky 6ab9d936d5 Remove extraneous null statement. No functionality change!
llvm-svn: 186893
2013-07-22 23:38:27 +00:00
Jakub Staszak d4d94065e3 Use switch instead of if. No functionality change.
llvm-svn: 186892
2013-07-22 23:38:16 +00:00
Jakub Staszak cb132face0 OldPtr is llvm::Instruction. Remove unneeded cast<>.
llvm-svn: 186880
2013-07-22 22:10:43 +00:00
Jakub Staszak 6b36db08f3 Change tabs to spaces.
llvm-svn: 186877
2013-07-22 21:11:30 +00:00
Matt Arsenault fb18323885 Fix spelling and grammar
llvm-svn: 186858
2013-07-22 18:59:58 +00:00
Benjamin Kramer 08e5070bf5 SROA: Microoptimization: Remove dead entries first, then sort.
While there replace an explicit struct with std::mem_fun.

llvm-svn: 186761
2013-07-20 08:38:34 +00:00
Chandler Carruth 6c321c131b Cleanup the stats counters for the new implementation. These actually
count the right things and have the right names.

llvm-svn: 186667
2013-07-19 10:57:36 +00:00
Chandler Carruth 1ed848d55c Fix another assert failure very similar to PR16651's test case. This
test case came from Benjamin and found the parallel bug in the vector
promotion code.

llvm-svn: 186666
2013-07-19 10:57:32 +00:00
Chandler Carruth 9f21fe1d65 Try to move to a more reasonable set of naming conventions given the new
implementation of the SROA algorithm. We were using the term 'partition'
in many places that no longer ever represented an actual partition, but
rather just an arbitrary slice of an alloca.

No functionality change intended here. Mostly just renaming of types,
functions, variables, and rewording of comments. Several comments were
rewritten to make a lot more sense in the new structure of things.

The stats are still weird and not reflective of how this really works.
I'll fix those up in a separate patch as it is a touch more semantic of
a change...

llvm-svn: 186659
2013-07-19 09:13:58 +00:00
Chandler Carruth 90a735d606 A long overdue cleanup in SROA to use 'DL' instead of 'TD' for the
DataLayout variables.

llvm-svn: 186656
2013-07-19 07:21:28 +00:00
Chandler Carruth 5955c9e4da Fix PR16651, an assert introduced in my recent re-work of the innards of
SROA.

The crux of the issue is that now we track uses of a partition of the
alloca in two places: the iterators over the partitioning uses and the
previously collected split uses vector. We weren't accounting for the
fact that the split uses might invalidate integer widening in ways other
than due to their width (in this case due to being volatile).

Further reduced testcase added to the tests.

llvm-svn: 186655
2013-07-19 07:12:23 +00:00
Chandler Carruth f0546402af Reapply r186316 with a fix for one bug where the code could walk off the
end of a vector. This was found with ASan. I've had one other report of
a crasher, but thus far been unable to reproduce the crash. It may well
be fixed with this version, and if not I'd like to get more information
from the build bots about what is happening.

See r186316 for the full commit log for the new implementation of the
SROA algorithm.

llvm-svn: 186565
2013-07-18 07:15:00 +00:00
Craig Topper d3a34f81f8 Add 'const' qualifiers to static const char* variables.
llvm-svn: 186371
2013-07-16 01:17:10 +00:00
Stephen Lin 837bba1c51 Remove trailing whitespace
llvm-svn: 186333
2013-07-15 17:55:02 +00:00
Chandler Carruth e3899f2c2c Revert r186316 while I track down an ASan failure and an assert from
a bot.

This reverts the commit which introduced a new implementation of the
fancy SROA pass designed to reduce its overhead. I'll skip the huge
commit log here, refer to r186316 if you're looking for how this all
works and why it works that way.

llvm-svn: 186332
2013-07-15 17:36:21 +00:00
Chandler Carruth e74ff4c643 Reimplement SROA yet again. Same fundamental principle, but a totally
different core implementation strategy.

Previously, SROA would build a relatively elaborate partitioning of an
alloca, associate uses with each partition, and then rewrite the uses of
each partition in an attempt to break apart the alloca into chunks that
could be promoted. This was very wasteful in terms of memory and compile
time because regardless of how complex the alloca or how much we're able
to do in breaking it up, all of the datastructure work to analyze the
partitioning was done up front.

The new implementation attempts to form partitions of the alloca lazily
and on the fly, rewriting the uses that make up that partition as it
goes. This has a few significant effects:
1) Much simpler data structures are used throughout.
2) No more double walk of the recursive use graph of the alloca, only
   walk it once.
3) No more complex algorithms for associating a particular use with
   a particular partition.
4) PHI and Select speculation is simplified and happens lazily.
5) More precise information is available about a specific use of the
   alloca, removing the need for some side datastructures.

Ultimately, I think this is a much better implementation. It removes
about 300 lines of code, but arguably removes more like 500 considering
that some code grew in the process of being factored apart and cleaned
up for this all to work.

I've re-used as much of the old implementation as possible, which
includes the lion's share of code in the form of the rewriting logic.
The interesting new logic centers around how the uses of a partition are
sorted, and split into actual partitions.

Each instruction using a pointer derived from the alloca gets
a 'Partition' entry. This name is totally wrong, but I'll do a rename in
a follow-up commit as there is already enough churn here. The entry
describes the offset range accessed and the nature of the access. Once
we have all of these entries we sort them in a very specific way:
increasing order of begin offset, followed by whether they are
splittable uses (memcpy, etc), followed by the end offset or whatever.
Sorting by splittability is important as it simplifies the collection of
uses into a partition.

Once we have these uses sorted, we walk from the beginning to the end
building up a range of uses that form a partition of the alloca.
Overlapping unsplittable uses are merged into a single partition while
splittable uses are broken apart and carried from one partition to the
next. A partition is also introduced to bridge splittable uses between
the unsplittable regions when necessary.

I've looked at the performance PRs fairly closely. PR15471 no longer
will even load (the module is invalid). Not sure what is up there.
PR15412 improves by between 5% and 10%, however it is nearly impossible
to know what is holding it up as SROA (the entire pass) takes less time
than reading the IR for that test case. The analysis takes the same time
as running mem2reg on the final allocas. I suspect (without much
evidence) that the new implementation will scale much better however,
and it is just the small nature of the test cases that makes the changes
small and noisy. Either way, it is still simpler and cleaner I think.

llvm-svn: 186316
2013-07-15 10:30:19 +00:00
Craig Topper b94011fd28 Use SmallVectorImpl& instead of SmallVector to avoid repeating small vector size.
llvm-svn: 186274
2013-07-14 04:42:23 +00:00
Andrew Trick a1e4118a46 LFTR improvement to avoid truncation.
This is a reimplemntation of the patch originally in r186107.

llvm-svn: 186215
2013-07-12 22:08:48 +00:00
Andrew Trick 2b71848ffe Cleanup LFTR logic.
llvm-svn: 186214
2013-07-12 22:08:44 +00:00
Andrew Trick 466555e50d Cleanup: rename a variable to make the logic easier to follow.
llvm-svn: 186213
2013-07-12 22:08:41 +00:00
Chandler Carruth cf3715cadd Revert "indvars: Improve LFTR by eliminating truncation when comparing
against a constant."

This reverts commit r186107. It didn't handle wrapping arithmetic in the
loop correctly and thus caused the following C program to count from
0 to UINT64_MAX instead of from 0 to 255 as intended:

  #include <stdio.h>
  int main() {
    unsigned char first = 0, last = 255;
    do { printf("%d\n", first); } while (first++ != last);
  }

Full test case and instructions to reproduce with just the -indvars pass
sent to the original review thread rather than to r186107's commit.

llvm-svn: 186152
2013-07-12 11:18:55 +00:00
Andrew Trick 3095993d6f indvars: Improve LFTR by eliminating truncation when comparing against a constant.
Patch by Michele Scandale!

Adds a special handling of the case where, during the loop exit
condition rewriting, the exit value is a constant of bitwidth lower
than the type of the induction variable: instead of introducing a
trunc operation in order to match correctly the operand types, it
allows to convert the constant value to an equivalent constant,
depending on the initial value of the induction variable and the trip
count, in order have an equivalent comparison between the induction
variable and the new constant.

llvm-svn: 186107
2013-07-11 17:08:59 +00:00
Michael Gottesman b40db26eae Teach TailRecursionElimination to handle certain cases of nocapture escaping allocas.
Without the changes introduced into this patch, if TRE saw any allocas at all,
TRE would not perform TRE *or* mark callsites with the tail marker.

Because TRE runs after mem2reg, this inadequacy is not a death sentence. But
given a callsite A without escaping alloca argument, A may not be able to have
the tail marker placed on it due to a separate callsite B having a write-back
parameter passed in via an argument with the nocapture attribute.

Assume that B is the only other callsite besides A and B only has nocapture
escaping alloca arguments (*NOTE* B may have other arguments that are not passed
allocas). In this case not marking A with the tail marker is unnecessarily
conservative since:

  1. By assumption A has no escaping alloca arguments itself so it can not
     access the caller's stack via its arguments.

  2. Since all of B's escaping alloca arguments are passed as parameters with
     the nocapture attribute, we know that B does not stash said escaping
     allocas in a manner that outlives B itself and thus could be accessed
     indirectly by A.

With the changes introduced by this patch:

  1. If we see any escaping allocas passed as a capturing argument, we do
     nothing and bail early.

  2. If we do not see any escaping allocas passed as captured arguments but we
     do see escaping allocas passed as nocapture arguments:

       i. We do not perform TRE to avoid PR962 since the code generator produces
          significantly worse code for the dynamic allocas that would be created
          by the TRE algorithm.

       ii. If we do not return twice, mark call sites without escaping allocas
           with the tail marker. *NOTE* This excludes functions with escaping
           nocapture allocas.

  3. If we do not see any escaping allocas at all (whether captured or not):

       i. If we do not have usage of setjmp, mark all callsites with the tail
          marker.

       ii. If there are no dynamic/variable sized allocas in the function,
           attempt to perform TRE on all callsites in the function.

Based off of a patch by Nick Lewycky.

rdar://14324281.

llvm-svn: 186057
2013-07-11 04:40:01 +00:00
Benjamin Kramer 3d90a8f4f9 Reassociate: Remove unnecessary default operator=.
llvm-svn: 185757
2013-07-06 15:10:13 +00:00
Sylvestre Ledru 751447a3ac Remove a useless declarations (found by scan-build)
llvm-svn: 185709
2013-07-05 15:58:12 +00:00
Craig Topper af0dea1347 Use SmallVectorImpl::iterator/const_iterator instead of SmallVector to avoid specifying the vector size.
llvm-svn: 185606
2013-07-04 01:31:24 +00:00
Craig Topper 31ee5866de Use SmallVectorImpl::iterator/const_iterator instead of SmallVector to avoid specifying the vector size.
llvm-svn: 185540
2013-07-03 15:07:05 +00:00
Nick Lewycky 5cd9538b90 dbgs() << Instruction doesn't print a newline on the end any more. Update these
debug statements to add a missing newline. Also canonicalize to '\n' instead of
"\n"; the latter calls a function with a loop the former does not.

llvm-svn: 184897
2013-06-26 00:30:18 +00:00
Bob Wilson acfc01dedf Fix SROA to avoid unnecessary scalar conversions for 1-element vectors.
When a 1-element vector alloca is promoted, a store instruction can often be
rewritten without converting the value to a scalar and using an insertelement
instruction to stuff it into the new alloca.  This patch just adds a check
to skip that conversion when it is unnecessary.  This turns out to be really
important for some ARM Neon operations where <1 x i64> is used to get around
the fact that i64 is not a legal type.

llvm-svn: 184870
2013-06-25 19:09:50 +00:00
Meador Inge dfb08a2cb8 Remove the simplify-libcalls pass (finally)
This commit completely removes what is left of the simplify-libcalls
pass.  All of the functionality has now been migrated to the instcombine
and functionattrs passes.  The following C API functions are now NOPs:

  1. LLVMAddSimplifyLibCallsPass
  2. LLVMPassManagerBuilderSetDisableSimplifyLibCalls

llvm-svn: 184459
2013-06-20 19:48:07 +00:00
Bill Wendling 7a639ea2a4 Access the TargetLoweringInfo from the TargetMachine object instead of caching it. The TLI may change between functions. No functionality change.
llvm-svn: 184352
2013-06-19 21:07:11 +00:00
Matt Arsenault d46fce1141 Move StructurizeCFG out of R600 to generic Transforms.
Register it with PassManager

llvm-svn: 184343
2013-06-19 20:18:24 +00:00
Quentin Colombet 145eb97d3a LSR: Fix the parameters used to compute the scaling factor cost.
Prior to this change, the considered addressing modes may be invalid since the
maximum and minimum offsets were not taking into account.
This was causing an assertion failure.

The added test case exercices that behavior.

<rdar://problem/14199725> Assertion failed: (CurScaleCost >= 0 && "Legal
addressing mode has an illegal cost!")

llvm-svn: 184341
2013-06-19 19:59:41 +00:00
Jakub Staszak 4898e62ac0 Use 0 instead of NULL.
llvm-svn: 184044
2013-06-15 12:20:44 +00:00
Shuxin Yang 140d592d84 Fix a potential bug in r183584.
r183584 tries to derive some info from the code *AFTER* a call and apply
these derived info to the code *BEFORE* the call, which is not always safe
as the call in question may never return, and in this case, the derived
info is invalid.
  
  Thank Duncan for pointing out this potential bug.

rdar://14073661 

llvm-svn: 183606
2013-06-08 04:56:05 +00:00
Shuxin Yang bd254f2601 Fix an assertion in MemCpyOpt pass.
The MemCpyOpt pass is capable of optimizing:
      callee(&S); copy N bytes from S to D.
    into:
      callee(&D);
subject to some legality constraints. 

  Assertion is triggered when the compiler tries to evalute "sizeof(typeof(D))",
while D is an opaque-typed, 'sret' formal argument of function being compiled.
i.e. the signature of the func being compiled is something like this:
  T caller(...,%opaque* noalias nocapture sret %D, ...)

  The fix is that when come across such situation, instead of calling some
utility functions to get the size of D's type (which will crash), we simply
assume D has at least N bytes as implified by the copy-instruction.

rdar://14073661 

llvm-svn: 183584
2013-06-07 22:45:21 +00:00
David Majnemer 29130c5e8d IndVarSimplify: check if loop invariant expansion can trap
IndVarSimplify is willing to move divide instructions outside of their
loop bodies if they are invariant of the loop.  However, it may not be
safe to expand them if we do not know if they can trap.

Instead, check to see if it is not safe to expand the instruction and
skip the expansion.

This fixes PR16041.

Testcase by Rafael Ávila de Espíndola.

llvm-svn: 183239
2013-06-04 17:51:58 +00:00
Quentin Colombet bf490d4a32 Loop Strength Reduce: Scaling factor cost.
Account for the cost of scaling factor in Loop Strength Reduce when rating the
formulae. This uses a target hook.

The default implementation of the hook is: if the addressing mode is legal, the
scaling factor is free.

<rdar://problem/13806271>

llvm-svn: 183045
2013-05-31 21:29:03 +00:00
Quentin Colombet 8aa7abe2ae Modify how the formulae are rated in Loop Strength Reduce.
Namely, check if the target allows to fold more that one register in the
addressing mode and if yes, adjust the cost accordingly.

Prior to this commit, reg1 + scale * reg2 accesses were artificially preferred
to reg1 + reg2 accesses. Indeed, the cost model wrongly assumed that reg1 + reg2
needs a temporary register for the computation, whereas it was correctly
estimated for reg1 + scale * reg2.

<rdar://problem/13973908>

llvm-svn: 183021
2013-05-31 17:20:29 +00:00
Michael J. Spencer df1ecbd734 Replace Count{Leading,Trailing}Zeros_{32,64} with count{Leading,Trailing}Zeros.
llvm-svn: 182680
2013-05-24 22:23:49 +00:00
Shuxin Yang 1d8d7e4d38 [GVN] Split critical-edge on the fly, instead of postpone edge-splitting to next
iteration.
  
  This on step toward non-iterative GVN. My local hack suggests that getting rid
of iteration will speedup GVN by 30%+ on a medium sized input (2k LOC, C++).
I cannot explain why not 2x or more at this moment.

llvm-svn: 181532
2013-05-09 18:34:27 +00:00
Nick Lewycky 5fb1963f2a Fix a bug in codegenprep where it was losing track of values OptimizeMemoryInst
by switching to a ValueMap. Patch by Andrea DiBiagio!

llvm-svn: 181397
2013-05-08 09:00:10 +00:00
Andrew Trick 9c72b071fe Rotate multi-exit loops even if the latch was simplified.
Test case by Michele Scandale!

Fixes PR10293: Load not hoisted out of loop with multiple exits.

There are few regressions with this patch, now tracked by
rdar:13817079, and a roughly equal number of improvements. The
regressions are almost certainly back luck because LoopRotate has very
little idea of whether rotation is profitable. Doing better requires a
more comprehensive solution.

This checkin is a quick fix that lacks generality (PR10293 has
a counter-example). But it trivially fixes the case in PR10293 without
interfering with other cases, and it does satify the criteria that
LoopRotate is a loop canonicalization pass that should avoid
heuristics and special cases.

I can think of two approaches that would probably be better in
the long run. Ultimately they may both make sense.

(1) LoopRotate should check that the current header would make a good
loop guard, and that the loop does not already has a sufficient
guard. The artifical SimplifiedLoopLatch check would be unnecessary,
and the design would be more general and canonical. Two difficulties:

- We need a strong guarantee that we won't endlessly rotate, so the
  analysis would need to be precise in order to avoid the
  SimplifiedLoopLatch precondition.

- Analysis like this are usually based on SCEV, which we don't want to
  rely on.

(2) Rotate on-demand in late loop passes. This could even be done by
shoving the loop back on the queue after the optimization that needs
it. This could work well when we find LICM opportunities in
multi-branch loops. This requires some work, and it doesn't really
solve the problem of SCEV wanting a loop guard before the analysis.

llvm-svn: 181230
2013-05-06 17:58:18 +00:00
Shuxin Yang 637b9bebd4 Decompose GVN::processNonLocalLoad() (about 400 LOC) into smaller helper functions. No function change.
This function consists of following steps:
   1. Collect dependent memory accesses.
   2. Analyze availability.
   3. Perform fully redundancy elimination, or 
   4. Perform PRE, depending on the availability

 Step 2, 3 and 4 are now moved to three helper routines.

llvm-svn: 181047
2013-05-03 19:17:26 +00:00
Shuxin Yang af2c3ddf0d [GV] Remove dead code which is really difficult to decipher.
Actually it took me couple of hours trying to make sense of them and
only to find they are dead code.  I guess the original author used
"allSingleSucc" to indicate if there are any critial edge emanating
from some blocks, and tried to perform code motion (actually speculation)
in the presence of these critical edges; but later on he/she changed mind
and decided to perform edge-splitting first.

llvm-svn: 180951
2013-05-02 21:14:31 +00:00
Filip Pizlo dec20e43c0 This patch breaks up Wrap.h so that it does not have to include all of
the things, and renames it to CBindingWrapping.h.  I also moved 
CBindingWrapping.h into Support/.

This new file just contains the macros for defining different wrap/unwrap 
methods.

The calls to those macros, as well as any custom wrap/unwrap definitions 
(like for array of Values for example), are put into corresponding C++ 
headers.

Doing this required some #include surgery, since some .cpp files relied 
on the fact that including Wrap.h implicitly caused the inclusion of a 
bunch of other things.

This also now means that the C++ headers will include their corresponding 
C API headers; for example Value.h must include llvm-c/Core.h.  I think 
this is harmless, since the C API headers contain just external function 
declarations and some C types, so I don't believe there should be any 
nasty dependency issues here.

llvm-svn: 180881
2013-05-01 20:59:00 +00:00
Nadav Rotem 1e211913b5 SROA: Generate selects instead of shuffles when blending values because this is the cannonical form.
Shuffles are more difficult to lower and we usually don't touch them, while we do optimize selects more often.

llvm-svn: 180875
2013-05-01 19:53:30 +00:00
Shuxin Yang 04a4fd43aa Fix a XOR reassociation bug.
When Reassociator optimize "(x | C1)" ^ "(X & C2)", it may swap the two
subexpressions, however, it forgot to swap cached constants (of C1 and C2)
accordingly.

rdar://13739160

llvm-svn: 180676
2013-04-27 18:02:12 +00:00
Eric Christopher 04d4e9312c Move C++ code out of the C headers and into either C++ headers
or the C++ files themselves. This enables people to use
just a C compiler to interoperate with LLVM.

llvm-svn: 180063
2013-04-22 22:47:22 +00:00
Rafael Espindola 74f2e46eef Clarify that llvm.used can contain aliases.
Also add a check for llvm.used in the verifier and simplify clients now that
they can assume they have a ConstantArray.

llvm-svn: 180019
2013-04-22 14:58:02 +00:00
Benjamin Kramer 0212dc27ed SROA: Don't crash on a select with two identical operands.
This is an edge case that can happen if we modify a chain of multiple selects.
Update all operands in that case and remove the assert. PR15805.

llvm-svn: 179982
2013-04-21 17:48:39 +00:00
Chris Lattner 8cf09416ea Fix a comment, PR15777.
llvm-svn: 179775
2013-04-18 17:42:14 +00:00
Jim Grosbach 0f38c1e3a7 Fix a typo in comment.
llvm-svn: 179542
2013-04-15 17:40:48 +00:00
Shuxin Yang 331f01dcb4 Redo the fix Benjamin Kramer committed in r178793 about iterator invalidation in Reassociate.
I brazenly think this change is slightly simpler than r178793 because: 
  - no "state" in functor
  - "OpndPtrs[i]" looks simpler than "&Opnds[OpndIndices[i]]" 

  While I can reproduce the probelm in Valgrind, it is rather difficult to come up
a standalone testing case. The reason is that when an iterator is invalidated,
the stale invalidated elements are not yet clobbered by nonsense data, so the
optimizer can still proceed successfully. 

  Thank Benjamin for fixing this bug and generously providing the test case.

llvm-svn: 179062
2013-04-08 22:00:43 +00:00
Chandler Carruth 0e8a52d18f Fix PR15674 (and PR15603): a SROA think-o.
The fix for PR14972 in r177055 introduced a real think-o in the *store*
side, likely because I was much more focused on the load side. While we
can arbitrarily widen (or narrow) a loaded value, we can't arbitrarily
widen a value to be stored, as that changes the width of memory access!
Lock down the code path in the store rewriting which would do this to
only handle the intended circumstance.

All of the existing tests continue to pass, and I've added a test from
the PR.

llvm-svn: 178974
2013-04-07 11:47:54 +00:00
Shuxin Yang 95adf5258f Disable the optimization about promoting vector-element-access with symbolic index.
This optimization is unstable at this moment; it 
  1) block us on a very important application
  2) PR15200
  3) test6 and test7 in test/Transforms/ScalarRepl/dynamic-vector-gep.ll
     (the CHECK command compare the output against wrong result)

   I personally believe this optimization should not have any impact on the
autovectorized code, as auto-vectorizer is supposed to put gather/scatter
in a "right" way.  Although in theory downstream optimizaters might reveal 
some gather/scatter optimization opportunities, the chance is quite slim.

   For the hand-crafted vectorizing code, in term of redundancy elimination,
load-CSE, copy-propagation and DSE can collectively achieve the same result,
but in much simpler way. On the other hand, these optimizers are able to 
improve the code in a incremental way; in contrast, SROA is sort of all-or-none
approach. However, SROA might slighly win in stack size, as it tries to figure 
out a stretch of memory tightenly cover the area accessed by the dynamic index.

 rdar://13174884
 PR15200

llvm-svn: 178912
2013-04-05 21:07:08 +00:00
Benjamin Kramer dd67654af6 Reassociate: Avoid iterator invalidation.
OpndPtrs stored pointers into the Opnd vector that became invalid when the
vector grows. Store indices instead. Sadly I only have a large testcase that
only triggers under valgrind, so I didn't include it.

llvm-svn: 178793
2013-04-04 21:15:42 +00:00
Shuxin Yang 6662fd0f15 Correct assertion condition
llvm-svn: 178484
2013-04-01 18:13:05 +00:00
Shuxin Yang 7b0c94e207 Implement XOR reassociation. It is based on following rules:
rule 1: (x | c1) ^ c2 => (x & ~c1) ^ (c1^c2),
     only useful when c1=c2
  rule 2: (x & c1) ^ (x & c2) = (x & (c1^c2))
  rule 3: (x | c1) ^ (x | c2) = (x & c3) ^ c3 where c3 = c1 ^ c2
  rule 4: (x | c1) ^ (x & c2) => (x & c3) ^ c1, where c3 = ~c1 ^ c2

 It reduces an application's size (in terms of # of instructions) by 8.9%.
 Reviwed by Pete Cooper. Thanks a lot!

 rdar://13212115  

llvm-svn: 178409
2013-03-30 02:15:01 +00:00
Jakub Staszak 4f9d1e85d0 Minor cleanups. No functionality change.
llvm-svn: 177837
2013-03-24 09:56:28 +00:00
Jakub Staszak f6df1e3def Use dyn_cast instead of isa && cast.
No functionality change.

llvm-svn: 177836
2013-03-24 09:25:47 +00:00
Chandler Carruth 34f0c7fcaf [SROA] Prefix names using a custom IRBuilder inserter.
The key part of this is ensuring that name prefixes remain in a Twine
form until we get to a point where we can nuke them under NDEBUG. This
is tricky using the old APIs as they played fast and loose with Twine,
which is prone to serious error. The inserter is much cleaner as it is
actually in the call stack leading to the setName call, and so has
a good opportunity to prepend the prefix.

This matters more than you might imagine because most runs over an
alloca find a single partition, and rewrite 3 or 4 instructions
referring to it. As a consequence doing this lazily and exclusively with
Twine allows the optimizer to delete more of it and shaves another 2% to
3% off of the release build's SROA run time for PR15412. I also think
the APIs are cleaner, and the use of Twine is more reliable, so
I consider it a win-win despite the churn required to reach this state.

llvm-svn: 177631
2013-03-21 09:52:18 +00:00
Meador Inge cf691565ed simplify-libcalls: Removed unused variable
The 'Modified' variable should have been removed from SimplifyLibCalls
in r177619, but was missed.  This commit removes it.

llvm-svn: 177622
2013-03-21 02:44:07 +00:00
Meador Inge 6b6a161ccf Move library call prototype attribute inference to functionattrs
The simplify-libcalls pass implemented a doInitialization hook to infer
function prototype attributes for well-known functions.  Given that the
simplify-libcalls pass is going away *and* that the functionattrs pass
is already in place to deduce function attributes, I am moving this logic
to the functionattrs pass.  This approach was discussed during patch
review:
http://lists.cs.uiuc.edu/pipermail/llvm-commits/Week-of-Mon-20121126/157465.html.

llvm-svn: 177619
2013-03-21 00:55:59 +00:00
Chandler Carruth 0fad17527b Fix a silly search-and-replace goof with r177495 that only broke
non-release builds.

llvm-svn: 177498
2013-03-20 07:40:56 +00:00
Chandler Carruth d177f86124 [SROA] Don't preserve the IR names in release builds.
This is espcially important because the new SROA pass goes to great
lengths to provide helpful names for debugging, and as a consequence
they can become very slow to render.

Good for between 5% and 15% of the SROA runtime on some slow test cases
such as the one in PR15412.

llvm-svn: 177495
2013-03-20 07:30:36 +00:00
Chandler Carruth 0941b66283 Move the endif to the correct line so we don't have warnings about
unused statistics variables.

llvm-svn: 177494
2013-03-20 06:47:00 +00:00
Chandler Carruth 5f5b616344 Introduce some new statistics to help track the exact behavior of the
new SROA pass.

llvm-svn: 177493
2013-03-20 06:30:46 +00:00
Quentin Colombet 2393cb92b8 Update global merge pass according to Duncan's advices:
- Remove useless includes
- Change misleading comments
- Move code into doFinalization

llvm-svn: 177445
2013-03-19 21:46:49 +00:00
Arnaud A. de Grandmaison 87c473f0d1 IndVarSimplify: do not recompute an IV value outside of the loop if :
- it is trivially known to be used inside the loop in a way that can not be optimized away
- there is no use outside of the loop which can take advantage of the computation hoisting

llvm-svn: 177432
2013-03-19 20:00:22 +00:00
Andrew Trick f3a2544dba Revert "Cleanup some SCEV logic a bit."
This reverts commit 82cd8f7382322bee7a71cdc31f7a923c44d37d32.

Just add a comment instead!

llvm-svn: 177377
2013-03-19 05:10:27 +00:00
Andrew Trick de78866594 Cleanup some SCEV logic a bit.
Make the code more obvious to scan-build and humans.

llvm-svn: 177375
2013-03-19 04:14:59 +00:00
Andrew Trick a1c01ba8c7 Tighten up an internal LSR API that should check for NULL.
No test case, but should fix a scan_build warning.

llvm-svn: 177374
2013-03-19 04:14:57 +00:00
Jakub Staszak bc421efddf Make method private. Keep coding standard.
llvm-svn: 177348
2013-03-18 23:31:30 +00:00
Quentin Colombet 8fc340976d Extend global merge pass to optionally consider global constant variables.
Also add some checks to not merge globals used within landing pad instructions or marked as "used".

llvm-svn: 177331
2013-03-18 22:30:07 +00:00
Chandler Carruth f74654d274 Mark internal classes as POD-like to get better behavior out of
SmallVector and DenseMap.

This speeds up SROA by 25% on PR15412.

llvm-svn: 177259
2013-03-18 08:36:46 +00:00
Chandler Carruth a1c54bbe34 PR14972: SROA vs. GVN exposed a really bad bug in SROA.
The fundamental problem is that SROA didn't allow for overly wide loads
where the bits past the end of the alloca were masked away and the load
was sufficiently aligned to ensure there is no risk of page fault, or
other trapping behavior. With such widened loads, SROA would delete the
load entirely rather than clamping it to the size of the alloca in order
to allow mem2reg to fire. This was exposed by a test case that neatly
arranged for GVN to run first, widening certain loads, followed by an
inline step, and then SROA which miscompiles the code. However, I see no
reason why this hasn't been plaguing us in other contexts. It seems
deeply broken.

Diagnosing all of the above took all of 10 minutes of debugging. The
really annoying aspect is that fixing this completely breaks the pass.
;] There was an implicit reliance on the fact that no loads or stores
extended past the alloca once we decided to rewrite them in the final
stage of SROA. This was used to encode information about whether the
loads and stores had been split across multiple partitions of the
original alloca. That required threading explicit tracking of whether
a *use* of a partition is split across multiple partitions.

Once that was done, another problem arose: we allowed splitting of
integer loads and stores iff they were loads and stores to the entire
alloca. This is a really arbitrary limitation, and splitting at least
some integer loads and stores is crucial to maximize promotion
opportunities. My first attempt was to start removing the restriction
entirely, but currently that does Very Bad Things by causing *many*
common alloca patterns to be fully decomposed into i8 operations and
lots of or-ing together to produce larger integers on demand. The code
bloat is terrifying. That is still the right end-goal, but substantial
work must be done to either merge partitions or ensure that small i8
values are eagerly merged in some other pass. Sadly, figuring all this
out took essentially all the time and effort here.

So the end result is that we allow splitting only when the load or store
at least covers the alloca. That ensures widened loads and stores don't
hurt SROA, and that we don't rampantly decompose operations more than we
have previously.

All of this was already fairly well tested, and so I've just updated the
tests to cover the wide load behavior. I can add a test that crafts the
pass ordering magic which caused the original PR, but that seems really
brittle and to provide little benefit. The fundamental problem is that
widened loads should Just Work.

llvm-svn: 177055
2013-03-14 11:32:24 +00:00
Dan Gohman 00253592c7 Change the order of the operands in patchAndReplaceAllUsesWith so
that they're more consistent with Value::replaceAllUsesWith.

llvm-svn: 176872
2013-03-12 16:22:56 +00:00
Jakub Staszak fd56611b49 Keep coding stanard.
llvm-svn: 176661
2013-03-07 22:20:06 +00:00
Jakub Staszak db4579d796 Don't create IRBuilder if we can return from the method earlier.
llvm-svn: 176660
2013-03-07 22:10:33 +00:00
Preston Gurd 485296d1e8 Bypass Slow Divides
* Only apply divide bypass optimization when not optimizing for size. 
* Fixed bug caused by constant for 0 value of type Int32,
  used dividend type to generate the constant instead.
* For atom x86-64 apply the divide bypass to use 16-bit divides instead of
  64-bit divides when operand values are small enough.
* Added lit tests for 64-bit divide bypass.

Patch by Tyler Nowicki!

llvm-svn: 176442
2013-03-04 18:13:57 +00:00
Benjamin Kramer ee40b9a2d4 CVP: If we have a PHI with an incoming select, try to skip the select.
This is a common pattern with dyn_cast and similar constructs, when the
PHI no longer depends on the select it can often be turned into a simpler
construct or even get hoisted out of the loop.

PR15340.

llvm-svn: 175995
2013-02-24 15:34:43 +00:00
Bill Wendling 09bd1f71ee Implement the NoBuiltin attribute.
The 'nobuiltin' attribute is applied to call sites to indicate that LLVM should
not treat the callee function as a built-in function. I.e., it shouldn't try to
replace that function with different code.

llvm-svn: 175835
2013-02-22 00:12:35 +00:00
Chad Rosier 9b7f9c3e9e Remove dead code and whitespace.
llvm-svn: 175804
2013-02-21 21:40:51 +00:00
Chad Rosier 4d87d45a05 Update a comment that looks to have been accidentally deleted many moons ago.
llvm-svn: 175658
2013-02-20 20:15:55 +00:00
Jakub Staszak ae2fd9c97d Remove unused variable.
llvm-svn: 175568
2013-02-19 22:17:58 +00:00
Jakub Staszak 3c6583a1b1 Minor cleanups. No functionality change.
llvm-svn: 175567
2013-02-19 22:14:45 +00:00
Jakub Staszak 90fbe91c58 Remove unneeded #includes.
llvm-svn: 175565
2013-02-19 22:06:38 +00:00
Jakub Staszak 086f6cde5d Fix typos.
llvm-svn: 175562
2013-02-19 22:02:21 +00:00
Jakub Staszak 11bd83551c Reduce indents in LSRInstance::NarrowSearchSpaceByCollapsingUnrolledCode method.
No functionality change.

llvm-svn: 175364
2013-02-16 16:08:15 +00:00
Dan Gohman a6307574d6 Actually delete this code, since it's really not clear what it's
trying to do.

llvm-svn: 175014
2013-02-12 22:26:41 +00:00
Dan Gohman f377160d2f Record PRE predecessors with a SmallVector instead of a DenseMap, and
avoid a second pred_iterator traversal.

llvm-svn: 175001
2013-02-12 19:49:10 +00:00
Dan Gohman 2001cd8f9e When disabling PRE for a value is directly redundant with itself
(through a loop), don't continue to iterate through the reamining
predecessors.

llvm-svn: 174994
2013-02-12 19:05:10 +00:00
Dan Gohman fd41de0b10 Check that pointers are removed from maps before calling delete on the pointers,
for tidiness' sake.

llvm-svn: 174988
2013-02-12 18:44:43 +00:00
Dan Gohman f60667020a Minor code simplification.
llvm-svn: 174985
2013-02-12 18:38:36 +00:00
Andrew Trick bc7059032b LSR IVChain improvement.
Handle chains in which the same offset is used for both loads and
stores to the same array.

Fixes rdar://11410078.

llvm-svn: 174789
2013-02-09 01:11:01 +00:00
Jakub Staszak f23980aba5 Remove #includes from the commonly used LoopInfo.h.
llvm-svn: 174786
2013-02-09 01:04:28 +00:00
Preston Gurd 25c3b6acc0 This patch aims to improve compile time performance by increasing
the SCEV vector size in LoopStrengthReduce. It is observed that
the BaseRegs vector size is 4 in most cases,
and elements are frequently copied when it is initialized as
SmallVector<const SCEV *, 2> BaseRegs.
Our benchmark results show that the compilation time performance
improved by ~0.5%.

Patch by Wan Xiaofei.

llvm-svn: 174219
2013-02-01 20:41:27 +00:00
Dan Gohman 20a2ae9df5 Change GetPointerBaseWithConstantOffset's DataLayout argument from a
reference to a pointer, so that it can handle the case where DataLayout
is not available and behave conservatively.

llvm-svn: 174024
2013-01-31 02:00:45 +00:00
Edwin Vane 82f80d4967 Fixing warnings revealed by gcc release build
Fixed set-but-not-used warnings.

Reviewer: gribozavr
llvm-svn: 173810
2013-01-29 17:42:24 +00:00
Michael Gottesman 79d8d81226 Extracted ObjCARC.cpp into its own library libLLVMObjCARCOpts in preparation for refactoring the ARC Optimizer.
llvm-svn: 173647
2013-01-28 01:35:51 +00:00
Michael Gottesman 5300cdd8f2 Renamed function IsPotentialUse to IsPotentialRetainableObjPtr.
This name change does the following:

1. Causes the function name to use proper ARC terminology.
2. Makes it clear what the function truly does.

llvm-svn: 173609
2013-01-27 06:19:48 +00:00
Michael Gottesman 12780c2d97 Added comment to ObjCARC elaborating what is meant by the term 'Provenance' in 'Provenance Analysis'.
llvm-svn: 173374
2013-01-24 21:35:00 +00:00
Michael Gottesman 8b5515fa1b Fixed typo.
llvm-svn: 173202
2013-01-22 21:53:43 +00:00
Michael Gottesman 9de6f96ad5 [ObjCARC] Refactored out the inner most 2-loops from PerformCodePlacement into the method ConnectTDBUTraversals.
The method PerformCodePlacement was doing too much (i.e. 3x loops, lots of
different checking). This refactoring separates the analysis section of the
method into a separate function while leaving the actual code placement and
analysis preparation in PerformCodePlacement.

*NOTE* Really this part of ObjCARC should be refactored out of the main pass
class into its own seperate class/struct. But, it is not time to make that
change yet though (don't want to make such an invasive change without fixing all
of the bugs first).

llvm-svn: 173201
2013-01-22 21:49:00 +00:00
Bill Wendling 09175b39f2 More encapsulation work.
Use the AttributeSet when we're talking about more than one attribute. Add a
function that adds a single attribute. No functionality change intended.

llvm-svn: 173196
2013-01-22 21:15:51 +00:00
Chandler Carruth 0ba8db45c6 Begin fleshing out an interface in TTI for modelling the costs of
generic function calls and intrinsics. This is somewhat overlapping with
an existing intrinsic cost method, but that one seems targetted at
vector intrinsics. I'll merge them or separate their names and use cases
in a separate commit.

This sinks the test of 'callIsSmall' down into TTI where targets can
control it. The whole thing feels very hack-ish to me though. I've left
a FIXME comment about the fundamental design problem this presents. It
isn't yet clear to me what the users of this function *really* care
about. I'll have to do more analysis to figure that out. Putting this
here at least provides it access to proper analysis pass tools and other
such. It also allows us to more cleanly implement the baseline cost
interfaces in TTI.

With this commit, it is now theoretically possible to simplify much of
the inline cost analysis's handling of calls by calling through to this
interface. That conversion will have to happen in subsequent commits as
it requires more extensive restructuring of the inline cost analysis.

The CodeMetrics class is now really only in the business of running over
a block of code and aggregating the metrics on that block of code, with
the actual cost evaluation done entirely in terms of TTI.

llvm-svn: 173148
2013-01-22 11:26:02 +00:00
Chandler Carruth bb9caa9241 Switch CodeMetrics itself over to use TTI to determine if an instruction
is free. The whole CodeMetrics API should probably be reworked more, but
this is enough to allow deleting the duplicate code there for computing
whether an instruction is free.

All of the passes using this have been updated to pull in TTI and hand
it to the CodeMetrics stuff. Further, a dead CodeMetrics API
(analyzeFunction) is nuked for lack of users.

llvm-svn: 173036
2013-01-21 13:04:33 +00:00
Michael Gottesman 87db357547 Improved comment.
llvm-svn: 172864
2013-01-18 23:02:45 +00:00
Michael Gottesman 9854e0c6a2 Fixed typo in comment.
llvm-svn: 172863
2013-01-18 23:00:33 +00:00
Bill Wendling 658d24d211 Use AttributeSet accessor methods instead of Attribute accessor methods.
Further encapsulation of the Attribute object. Don't allow direct access to the
Attribute object as an aggregate.

llvm-svn: 172853
2013-01-18 21:53:16 +00:00
Benjamin Kramer 0eba5775f3 Silence GCC warning about dropping off a non-void function.
llvm-svn: 172839
2013-01-18 19:45:22 +00:00
Michael Gottesman d359e06245 Fixed 80+ violation.
llvm-svn: 172782
2013-01-18 03:08:39 +00:00
Michael Gottesman 1d777513e5 Added missing const from my last commit.
llvm-svn: 172736
2013-01-17 18:36:17 +00:00
Michael Gottesman 782e34474a [ObjCARC] Implemented operator<< for InstructionClass and changed a ``Visited'' Debug message to use it.
llvm-svn: 172735
2013-01-17 18:32:34 +00:00
Michael Gottesman 6a9355f8d7 [ObjCARC] Turn off ignoring unwind edges in ObjCARC when -fno-objc-arc-exception is enabled due to it's affect on correctness.
Specifically according to the semantics of ARC -fno-objc-arc-exception simply
states that it is expected that the unwind path out of a call *MAY* not release
objects. Thus we can have the situation where a release gets moved into a catch
block which we ignore when we remove a retain/release pair resulting in (even
though we assume the program is exiting anyways) the cleanup code path
potentially blowing up before program exit.

llvm-svn: 172599
2013-01-16 06:32:39 +00:00
Michael Gottesman e9145d3846 Changed SmallPtrSet.count guard + SmallPtrSet.insert to just SmallPtrSet.insert.
llvm-svn: 172452
2013-01-14 19:18:39 +00:00
Michael Gottesman 4385edf5cb Fixed some 80+ violations.
llvm-svn: 172374
2013-01-14 01:47:53 +00:00
Michael Gottesman 97e3df087d Updated the documentation in ObjCARC.cpp to fit the style guide better (i.e. use doxygen). Still some work to do though.
llvm-svn: 172371
2013-01-14 00:35:14 +00:00
Michael Gottesman f15c0bb495 Fixed an infinite loop in the block escape in analysis in ObjCARC caused by 2x blocks each assigned a value via a phi-node causing each to depend on the other.
A test case is provided as well.

llvm-svn: 172368
2013-01-13 22:12:06 +00:00
Michael Gottesman 1a89fe554b [ObjCARC] Even more debug messages!
llvm-svn: 172347
2013-01-13 07:47:32 +00:00
Michael Gottesman af2113ffb5 [ObjCARC] More debug messages.
llvm-svn: 172346
2013-01-13 07:00:51 +00:00
Chandler Carruth 7e31c8f0ae Fix an editor goof in r171738 that Bill spotted. He may even have a test
case, but looking at the diff this was an obviously unintended change.

Thanks for the careful review Bill! =]

llvm-svn: 172336
2013-01-12 23:46:04 +00:00
Michael Gottesman 9f1be68703 Fixed debug message in ObjCARC.
llvm-svn: 172299
2013-01-12 03:45:49 +00:00
Michael Gottesman b24bdef7a4 Fixed a few debug messages in ObjCARC and added one.
llvm-svn: 172298
2013-01-12 02:57:16 +00:00
Michael Gottesman 556ff61122 Fixed bug in ObjCARC where we were changing a call from objc_autoreleaseRV => objc_autorelease but were not updating the InstructionClass to IC_Autorelease.
llvm-svn: 172288
2013-01-12 01:25:19 +00:00
Michael Gottesman c9656faf1e Fixed a bug where we were tail calling objc_autorelease causing an object to not be placed into an autorelease pool.
The reason that this occurs is that tail calling objc_autorelease eventually
tail calls -[NSObject autorelease] which supports fast autorelease. This can
cause us to violate the semantic gaurantees of __autoreleasing variables that
assignment to an __autoreleasing variables always yields an object that is
placed into the innermost autorelease pool.

The fix included in this patch works by:

1. In the peephole optimization function OptimizeIndividualFunctions, always
remove tail call from objc_autorelease.
2. Whenever we convert to/from an objc_autorelease, set/unset the tail call
keyword as appropriate.

*NOTE* I also handled the case where objc_autorelease is converted in
OptimizeReturns to an autoreleaseRV which still violates the ARC semantics. I
will be removing that in a later patch and I wanted to make sure that the tree
is in a consistent state vis-a-vis ARC always.

Additionally some test cases are provided and all tests that have tail call marked
objc_autorelease keywords have been modified so that tail call has been removed.

*NOTE* One test fails due to a separate bug that I am going to commit soon. Thus
I marked the check line TMP: instead of CHECK: so make check does not fail.

llvm-svn: 172287
2013-01-12 01:25:15 +00:00
Shuxin Yang c5c730b0e0 PR14904: Segmentation fault running pass 'Recognize loop idioms'
The root cause is mistakenly taking for granted that 
    "dyn_cast<Instruction>(a-Value)"
return a non-NULL instruction.

llvm-svn: 172145
2013-01-10 23:32:01 +00:00
Michael Gottesman a6cb018bb5 [ObjCARC Debug Message] Added debug message when we convert an autorelease into an autoreleaseRV.
llvm-svn: 172034
2013-01-10 02:03:50 +00:00
Michael Gottesman c189a392ce [ObjCARC Debug Messages] This is a squashed commit of 3x debug message commits ala echristo's suggestion.
1. Added debug messages when in OptimizeIndividualCalls we move calls into predecessors and then erase the original call.
2. Added debug messages when in the process of moving calls in ObjCARCOpt::MoveCalls we create new RR and delete old RR.
3. Added a debug message when we visit a specific retain instruction in ObjCARCOpt::PerformCodePlacement.

llvm-svn: 171988
2013-01-09 19:23:24 +00:00
Benjamin Kramer 130fcde3e5 LICM: Hoist insertvalue/extractvalue out of loops.
Fixes PR14854.

llvm-svn: 171984
2013-01-09 18:12:03 +00:00
Michael Gottesman 10426b571e Fixed EOL whitespace.
llvm-svn: 171791
2013-01-07 21:26:07 +00:00
Chandler Carruth 95f83e0155 Sink AddrMode back into TargetLowering, removing one of the most
peculiar headers under include/llvm.

This struct still doesn't make a lot of sense, but it makes more sense
down in TargetLowering than it did before.

llvm-svn: 171739
2013-01-07 15:14:13 +00:00
Chandler Carruth 6e479322aa Remove LSR's use of the random AddrMode struct. These variables were
already in a class, just inline the four of them. I suspect that this
class could be simplified some to not always keep distinct variables for
these things, but it wasn't clear to me how given the usage so I opted
for a trivial and mechanical translation.

This removes one of the two remaining users of a header in include/llvm
which does nothing more than define a 4 member struct.

llvm-svn: 171738
2013-01-07 15:04:40 +00:00
Chandler Carruth 26c59fa870 Switch the SCEV expander and LoopStrengthReduce to use
TargetTransformInfo rather than TargetLowering, removing one of the
primary instances of the layering violation of Transforms depending
directly on Target.

This is a really big deal because LSR used to be a "special" pass that
could only be tested fully using llc and by looking at the full output
of it. It also couldn't run with any other loop passes because it had to
be created by the backend. No longer is this true. LSR is now just
a normal pass and we should probably lift the creation of LSR out of
lib/CodeGen/Passes.cpp and into the PassManagerBuilder. =] I've not done
this, or updated all of the tests to use opt and a triple, because
I suspect someone more familiar with LSR would do a better job. This
change should be essentially without functional impact for normal
compilations, and only change behvaior of targetless compilations.

The conversion required changing all of the LSR code to refer to the TTI
interfaces, which fortunately are very similar to TargetLowering's
interfaces. However, it also allowed us to *always* expect to have some
implementation around. I've pushed that simplification through the pass,
and leveraged it to simplify code somewhat. It required some test
updates for one of two things: either we used to skip some checks
altogether but now we get the default "no" answer for them, or we used
to have no information about the target and now we do have some.

I've also started the process of removing AddrMode, as the TTI interface
doesn't use it any longer. In some cases this simplifies code, and in
others it adds some complexity, but I think it's not a bad tradeoff even
there. Subsequent patches will try to clean this up even further and use
other (more appropriate) abstractions.

Yet again, almost all of the formatting changes brought to you by
clang-format. =]

llvm-svn: 171735
2013-01-07 14:41:08 +00:00
Silviu Baranga a055aab506 Make the MergeGlobals pass correctly handle the address space qualifiers of the global variables. We partition the set of globals by their address space, and apply the same the trasnformation as before to merge them.
llvm-svn: 171730
2013-01-07 12:31:25 +00:00
Chandler Carruth 342cc255d0 Switch LoopIdiom pass to directly require target transform information.
I'm sorry for duplicating bad style here, but I wanted to keep
consistency. I've pinged the code review thread where this style was
reviewed and changes were requested.

llvm-svn: 171714
2013-01-07 09:17:41 +00:00
Chandler Carruth 0b4ef9cedc Make SimplifyCFG simply depend upon TargetTransformInfo and pass it
through as a reference rather than a pointer. There is always *some*
implementation of this available, so this simplifies code by not having
to test for whether it is available or not.

Further, it turns out there were piles of places where SimplifyCFG was
recursing and not passing down either TD or TTI. These are fixed to be
more pedantically consistent even though I don't have any particular
cases where it would matter.

llvm-svn: 171691
2013-01-07 03:53:25 +00:00
Chandler Carruth 50a36cd148 Make the popcnt support enums and methods have more clear names and
follow the conding conventions regarding enumerating a set of "kinds" of
things.

llvm-svn: 171687
2013-01-07 03:16:03 +00:00
Chandler Carruth d3e73556d6 Move TargetTransformInfo to live under the Analysis library. This no
longer would violate any dependency layering and it is in fact an
analysis. =]

llvm-svn: 171686
2013-01-07 03:08:10 +00:00
Michael Gottesman add0847459 [ObjCARC Debug Message] - Added debug message when fuse a retain/autorelease pair in ObjCARCContract::ContractAutorelease.
llvm-svn: 171679
2013-01-07 00:31:26 +00:00