Current value using as a trap instruction (0xefefefef) is not a good choice
for MIPS because it's a valid MIPS instruction `swc3 $15,-4113(ra)`. This
patch replaces 0xefefefef by 0x04170001. For all MIPS ISA revisions before
R6, this value is just invalid instruction. Starting from MIPS R6 it's
a valid instruction `sigrie 1` which signals a Reserved Instruction exception.
mips-traps.s test case is added to test trap encoding. Other test cases
are modified to remove redundant checking.
Differential revision: https://reviews.llvm.org/D54154
llvm-svn: 347029
Remove the default initializer for TrapInstr; all subclasses overwrite
the defaults in their constructors anyway.
This fixes compilation errors like these, with GCC 5.4 on Ubuntu 16.04,
present since SVN r346893:
In file included from ../tools/lld/ELF/Arch/AArch64.cpp:12:0:
../tools/lld/ELF/Target.h:125:49: error: array must be initialized with a brace-enclosed initializer
std::array<uint8_t, 4> TrapInstr = {0, 0, 0, 0};
^
../tools/lld/ELF/Target.h:125:49: error: too many initializers for ‘std::array<unsigned char, 4ul>’
Differential Revision: https://reviews.llvm.org/D54569
llvm-svn: 346934
The uint32_t type does not clearly convey that these fields are interpreted
in the target endianness. Converting them to byte arrays should make this
more obvious and less error-prone.
Patch by James Clarke
Differential Revision: http://reviews.llvm.org/D54207
llvm-svn: 346893
On PowerPC64, when a function call offset is too large to encode in a call
instruction the address is stored in a table in the data segment. A thunk is
used to load the branch target address from the table relative to the
TOC-pointer and indirectly branch to the callee. When linking position-dependent
code the addresses are stored directly in the table, for position-independent
code the table is allocated and filled in at load time by the dynamic linker.
For position-independent code the branch targets could have gone in the .got.plt
but using the .branch_lt section for both position dependent and position
independent binaries keeps it consitent and helps keep this PPC64 specific logic
seperated from the target-independent code handling the .got.plt.
Differential Revision: https://reviews.llvm.org/D53408
llvm-svn: 346877
The R_AARCH64_ADR_PREL_PG_HI21 relocation type is given the R_PAGE_PC
RelExpr. This can be transformed to R_PLT_PAGE_PC via toPlt().
Unfortunately the resolution is identical to R_PAGE_PC so instead of
getting the address of the PLT entry we get the address of the symbol
which may not be correct in the case of static ifuncs. The fix is to
handle the cases separately and use getPltVA() + A with R_PLT_PAGE_PC.
Differential Revision: https://reviews.llvm.org/D54474
llvm-svn: 346863
- Make mergeSymbolRecords a method of PDBLinker to reduce the number of
parameters it needs.
- Remove a stale FIXME comment about error handling. We already drop
unknown symbol records, log them, and continue.
- Update a comment about why we're copying the symbol record. We do it
to realign the record. We can already mutate the symbol record memory,
it's memory allocated by relocateDebugChunk.
- Avoid the extra `CVSymbol NewSym` variable. We can mutate Sym in
place, which is best, since we're mutating the underlying record anyway.
llvm-svn: 346817
gdb-index-multiple-cu-2.s puts the symbol in question to another object file %t1.o, so that its CuIndex is affected by the number of CUs in %t.o
Also change `Kind:` in a comment to `Attributes:` as a follow-up of D54480 and D54481
llvm-svn: 346796
Summary:
NameTypeEntry::Type is a bit-packed value of CU index+attributes (https://sourceware.org/gdb//onlinedocs/gdb/Index-Section-Format.html), which is named cu_index_and_attrs in a local variable in gdb/dwarf2read.c:dw2_symtab_iter_next
The new name CuIndexAndAttrs is more meaningful.
Reviewers: ruiu, dblaikie, espindola
Reviewed By: dblaikie
Subscribers: emaste, aprantl, arichardson, JDevlieghere, arphaman, llvm-commits
Differential Revision: https://reviews.llvm.org/D54481
llvm-svn: 346794
Summary:
Idx passed to readPubNamesAndTypes was an index into Chunks, not an
index into the CU list. This would be incorrect if some .debug_info
section contained more than 1 DW_TAG_compile_unit.
In real world, glibc Scrt1.o is a partial link of start.os abi-note.o init.o and contains 2 CUs in debug builds.
Without this patch, any application linking such Scrt1.o would have invalid .gdb_index
The issue could be demonstrated by:
(gdb) py print(gdb.lookup_global_symbol('main'))
None
Reviewers: espindola, ruiu
Reviewed By: ruiu
Subscribers: Higuoxing, grimar, dblaikie, emaste, aprantl, arichardson, JDevlieghere, arphaman, llvm-commits
Differential Revision: https://reviews.llvm.org/D54361
llvm-svn: 346747
Summary:
The debug_info_offset value may be relocated.
This is lld side change of D54375.
Reviewers: ruiu, dblaikie, grimar, espindola
Subscribers: emaste, arichardson, JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D54376
llvm-svn: 346616
`--no-demangle` now also applies to the name section. This change
was motivated by the rust team that have a slightly different name
mangling scheme to the standard C++ itanium one and prefer to do their
de-mangling as a post-link setp.
Patch by Alex Crichton!
Differential Revision: https://reviews.llvm.org/D54279
llvm-svn: 346516
Summary:
Reuse the "referenced by" note diagnostic code that we already use for
undefined symbols. In my case, it turned this:
lld-link: error: relocation against symbol in discarded section: .text
lld-link: error: relocation against symbol in discarded section: .text
...
Into this:
lld-link: error: relocation against symbol in discarded section: .text
>>> referenced by libANGLE.lib(CompilerGL.obj):(.SCOVP$M)
>>> referenced by libANGLE.lib(CompilerGL.obj):(.SCOVP$M)
...
lld-link: error: relocation against symbol in discarded section: .text
>>> referenced by obj/third_party/angle/libGLESv2/entry_points_egl_ext.obj:(.SCOVP$M)
>>> referenced by obj/third_party/angle/libGLESv2/entry_points_egl_ext.obj:(.SCOVP$M)
...
I think the new output is more useful.
Reviewers: ruiu, pcc
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D54240
llvm-svn: 346427
Summary:
D53821 fixed the bogus MSVC (at least 2017) C4146 warning (unary minus applied on unsigned type)
by using std::numeric_limits<int32_t>::min().
The warning was because -2147483648 is incorrectly treated as unsigned long instead of long long)
Let's use INT32_MIN which is arguably more readable.
Note, on GCC or clang, -0x80000000 works fine (ILP64: long, LP64: long long).
Reviewers: ruiu, jhenderson, sfertile, espindola
Reviewed By: sfertile
Subscribers: emaste, nemanjai, arichardson, kbarton, jsji, llvm-commits
Differential Revision: https://reviews.llvm.org/D54200
llvm-svn: 346356
Used for WebAssembly threads proposal. Add a flag --shared-memory
which sets the IS_SHARED bit in WasmLimits
Differential Revision: https://reviews.llvm.org/D54130
llvm-svn: 346248
Summary: llvm-readobj/readelf accepts both -s and -S as aliases for --sections. However with GNU readelf only -S means --section, and -s means --symbols. I would like to make llvm-readelf more compatible.
Reviewers: MaskRay, espindola
Reviewed By: MaskRay
Subscribers: emaste, arichardson, steven_wu, dexonsmith, llvm-commits
Differential Revision: https://reviews.llvm.org/D54118
llvm-svn: 346164
This change allows for link-time merging of debugging information from
Microsoft precompiled types OBJs compiled with cl.exe /Z7 /Yc and /Yu.
This fixes llvm.org/PR34278
Differential Revision: https://reviews.llvm.org/D45213
llvm-svn: 346154
Summary:
It is difficult to touch a file with a relative mtime across different OSes as POSIX touch -d is rigid. While we may construct relative timestamps with `date`, POSIX date is inadequate to do so as various OSes' date do not agree on a common format (OpenBSD uses `date -r seconds`, FreeBSD uses `date -v-2M` while GNU accepts `-d '-2 min'`)
Just use python os.utime()
Original description:
The case may randomly fail if we test it with command "
while llvm-lit tools/lld/test/ELF/lto/cache.ll; do true; done". It is because the llvmcache-foo file is younger than llvmcache-349F039B8EB076D412007D82778442BED3148C4E and llvmcache-A8107945C65C2B2BBEE8E61AA604C311D60D58D6. But due to timestamp precision reason their timestamp is the same. Given the same timestamp, the file prune policy is to remove bigger size file first, so mostly foo file is removed for its bigger size. And the files size is under threshold after deleting foo file. That's what test case expect.
However sometimes, the precision is enough to measure that timestamp of llvmcache-349F039B8EB076D412007D82778442BED3148C4E and llvmcache-A8107945C65C2B2BBEE8E61AA604C311D60D58D6 are smaller than foo, so llvmcache-349F039B8EB076D412007D82778442BED3148C4E and llvmcache-A8107945C65C2B2BBEE8E61AA604C311D60D58D6 are deleted first. Since the files size is still above the file size threshold after deleting the 2 files, the foo file is also deleted. And then the test case fails, because it expect only one file should be deleted instead of 3.
The fix is to change the timestamp of llvmcache-foo file to meet the thinLTO prune policy.
The same fix is applied to llvm code at https://reviews.llvm.org/D52452.
Patch by Luo Yuanke.
Reviewers: ruiu, craig.topper, smaslov, Jianping, espindola, LuoYuanke, tejohnson
Reviewed By: tejohnson
Subscribers: sbc100, krytarowski, aheejin, llvm-commits, dexonsmith, steven_wu, arichardson, inglorion, emaste, bjope, rupprecht
Differential Revision: https://reviews.llvm.org/D54039
llvm-svn: 346006
Summary:
The case may randomly fail if we test it with command "
while llvm-lit tools/lld/test/ELF/lto/cache.ll; do true; done". It is because the llvmcache-foo file is younger than llvmcache-349F039B8EB076D412007D82778442BED3148C4E and llvmcache-A8107945C65C2B2BBEE8E61AA604C311D60D58D6. But due to timestamp precision reason their timestamp is the same. Given the same timestamp, the file prune policy is to remove bigger size file first, so mostly foo file is removed for its bigger size. And the files size is under threshold after deleting foo file. That's what test case expect.
However sometimes, the precision is enough to measure that timestamp of llvmcache-349F039B8EB076D412007D82778442BED3148C4E and llvmcache-A8107945C65C2B2BBEE8E61AA604C311D60D58D6 are smaller than foo, so llvmcache-349F039B8EB076D412007D82778442BED3148C4E and llvmcache-A8107945C65C2B2BBEE8E61AA604C311D60D58D6 are deleted first. Since the files size is still above the file size threshold after deleting the 2 files, the foo file is also deleted. And then the test case fails, because it expect only one file should be deleted instead of 3.
The fix is to change the timestamp of llvmcache-foo file to meet the thinLTO prune policy.
The same fix is applied to llvm code at https://reviews.llvm.org/D52452.
Patch by Luo Yuanke.
Reviewers: ruiu, craig.topper, smaslov, Jianping, espindola, LuoYuanke
Subscribers: rupprecht, bjope, emaste, inglorion, arichardson, steven_wu, dexonsmith, llvm-commits
Differential Revision: https://reviews.llvm.org/D53123
llvm-svn: 345977
Summary:
D52830 sets sh_link to .symtab in static link, which breaks executable stripped by GNU strip.
It may also be odd that .rela.plt (SHF_ALLOC) points to .symtab (non-SHF_ALLOC).
Change the logic on pcc's suggestion.
Before:
% clang -fuse-ld=lld -static -xc =(printf 'int main(){}') # or gcc
% strip a.out; ./a.out
unexpected reloc type in static binary[1] 61634 segmentation fault ./a.out
Reviewers: ruiu, grimar, emaste, espindola
Reviewed By: ruiu
Subscribers: pcc, arichardson, llvm-commits
Differential Revision: https://reviews.llvm.org/D53993
llvm-svn: 345899
This patch should not introduce any behavior changes. It consists of
mostly one of two changes:
1. Replacing fall through comments with the LLVM_FALLTHROUGH macro
2. Inserting 'break' before falling through into a case block consisting
of only 'break'.
We were already using this warning with GCC, but its warning behaves
slightly differently. In this patch, the following differences are
relevant:
1. GCC recognizes comments that say "fall through" as annotations, clang
doesn't
2. GCC doesn't warn on "case N: foo(); default: break;", clang does
3. GCC doesn't warn when the case contains a switch, but falls through
the outer case.
I will enable the warning separately in a follow-up patch so that it can
be cleanly reverted if necessary.
Reviewers: alexfh, rsmith, lattner, rtrieu, EricWF, bollu
Differential Revision: https://reviews.llvm.org/D53950
llvm-svn: 345882
This is https://bugs.llvm.org/show_bug.cgi?id=39493.
We crashed previously because did not handle /DISCARD/ properly
when -r was used. I think it is uncommon to use scripts with -r, though I see
nothing wrong to handle the /DISCARD/ so that we will not crash at least.
Differential revision: https://reviews.llvm.org/D53864
llvm-svn: 345819
Summary:
There are really three different kinds of TLS layouts:
* A fixed TLS-to-TP offset. On architectures like PowerPC, MIPS, and
RISC-V, the thread pointer points to a fixed offset from the start
of the executable's TLS segment. The offset is 0x7000 for PowerPC
and MIPS, which allows a signed 16-bit offset to reach 0x1000 of
per-thread implementation data and 0xf000 of the application's TLS
segment. The size and layout of the TCB isn't relevant to the static
linker and might not be known.
* A fixed TCB size. This is the format documented as "variant 1" in
Ulrich Drepper's TLS spec. The thread pointer points to a 2-word TCB
followed by the executable's TLS segment. The first word is always
the DTV pointer. Used on ARM. The thread pointer must be aligned to
the TLS segment's alignment, possibly creating alignment padding.
* Variant 2. This format predates variant 1 and is also documented in
Drepper's TLS spec. It allocates the executable's TLS segment before
the thread pointer, apparently for backwards-compatibility. It's
used on x86 and SPARC.
Factor out an lld:🧝:getTlsTpOffset() function for use in a
follow-up patch for Android. The TcbSize/TlsTpOffset fields are only used
in getTlsTpOffset, so replace them with a switch on Config->EMachine.
Reviewers: espindola, ruiu, PkmX, jrtc27
Reviewed By: ruiu, PkmX, jrtc27
Subscribers: jyknight, emaste, sdardis, nemanjai, javed.absar, arichardson, kristof.beyls, kbarton, fedor.sergeev, atanasyan, PkmX, jsji, llvm-commits
Differential Revision: https://reviews.llvm.org/D53905
llvm-svn: 345775
Summary: .rela.plt may only contain R_*_{,I}RELATIVE relocations and not need a symbol table link. bfd/gold fallbacks to sh_link=0 in this case. Without this patch, ld.lld --strip-all caused lld to dereference a null pointer.
Reviewers: ruiu, grimar, espindola
Reviewed By: ruiu
Subscribers: emaste, arichardson, llvm-commits
Differential Revision: https://reviews.llvm.org/D53881
llvm-svn: 345648
Visual Studio has a bug where it converts the integer literal 2147483648
into an unsigned int instead of a long long (i.e. it follows C89 rules).
The bug has been reported as:
https://developercommunity.visualstudio.com/content/problem/141813/-2147483648-c4146-error.html.
Because of this bug, we were getting a signed/unsigned comparison
warning in VS2015 from the old code (the subsequent unary negation had
no effect on the type).
Reviewed by: sfertile
Differential Revision: https://reviews.llvm.org/D53821
llvm-svn: 345579
Summary: There are too many reasonable cases that would be considered unorderable.
Reviewers: ruiu, espindola, Bigcheese
Reviewed By: ruiu
Subscribers: grimar, emaste, arichardson, llvm-commits
Differential Revision: https://reviews.llvm.org/D53669
llvm-svn: 345322
Out::DebugInfo was used only by GdbIndex class to determine if
we need to create a .gdb_index section, but we can do the same
check without it.
Added a test that this patch doesn't change the existing behavior.
llvm-svn: 345058
Summary:
During upgrading of the FreeBSD source tree with lld 7.0.0, I noticed
that it started complaining about `crt1.o` having an "index past the
end of the symbol table".
Such a symbol table looks approximately like this, viewed with `readelf
-s` (note the `Ndx` field being messed up):
```
Symbol table '.symtab' contains 4 entries:
Num: Value Size Type Bind Vis Ndx Name
0: 00000000 0 NOTYPE LOCAL DEFAULT UND
1: 00000000 0 SECTION LOCAL DEFAULT 1
2: 00000000 0 NOTYPE WEAK HIDDEN RSV[0xffff] __rel_iplt_end
3: 00000000 0 NOTYPE WEAK HIDDEN RSV[0xffff] __rel_iplt_start
```
At first, it seemed that recent ifunc relocation work had caused this:
<https://reviews.freebsd.org/rS339351>, but it turned out that it was
due to incorrect processing of the object files by lld, when using `-r`
(a.k.a. --relocatable).
Bisecting showed that rL324421 ("Convert a use of Config->Static") was
the commit where this new behavior began. Simply reverting it solved
the issue, and the `__rel_iplt` symbols had an index of `UND` again.
Looking at Rafael's commit message, I think he simply missed the
possibility of `--relocatable` being in effect, so I have added an
additional check for it.
I also added a simple regression test case.
Reviewers: grimar, ruiu, emaste, espindola
Reviewed By: ruiu
Subscribers: arichardson, krytarowski, llvm-commits
Differential Revision: https://reviews.llvm.org/D53515
llvm-svn: 345002
emulation.s is testing multiple architectures, which means it needs all
the corresponding backends enabled, which might not be true for all
developers (for example, I don't have PPC or MIPS enabled). Rather than
marking the entire test as unsupported for such developers, split it up
per backend to get better testing granularity.
Differential Revision: https://reviews.llvm.org/D53544
llvm-svn: 344986
Turns out I wasn't actually running this test locally, since I don't
build the PPC and MIPS backends. Whoops.
Perhaps this test should be split up per-architecture?
llvm-svn: 344980
We need this to support 32-bit ARM. Add test cases for emulation
handling for this architecture as well.
Differential Revision: https://reviews.llvm.org/D53539
llvm-svn: 344976
Summary:
Before, superfluous warnings were emitted for the following two cases:
1) When from symbol was in a discarded section.
The profile should be thought of as affiliated to the section.
It makes sense to ignore the profile if the section is discarded.
2) When to symbol was in a shared object.
The object file containing the profile may not know about the to
symbol, which can reside in another object file (useful profile) or a
shared object (not useful as symbols in the shared object are fixed
and unorderable). It makes sense to ignore the profile from the object
file.
Note, the warning when to symbol was undefined was suppressed in
D53044, which is still useful for --symbol-ordering-file=
This patch silences the warnings. The check is actually more relaxed (no
warnings if either From or To is not Defined) for simplicity and I don't
see a compelling reason to warn on more cases.
Reviewers: ruiu, davidxl, espindola, Bigcheese
Reviewed By: ruiu
Subscribers: emaste, arichardson, llvm-commits
Differential Revision: https://reviews.llvm.org/D53470
llvm-svn: 344974
This patch adds a support for OUTPUT_FORMAT linker script directive.
Since I'm not 100% confident with BFD names you can use in the directive
for all architectures, I added only a few in this patch. We can add
other names for other archtiectures later.
We still do not support triple-style OUTPUT_FORMAT directive, namely,
OUTPUT_FORMAT(bfdname, big, little). If you pass -EL (little endian)
or -EB (big endian) to the linker, GNU linkers pick up big or little
as a BFD name, correspondingly, so that you can use a single linker
script for bi-endian processor. I'm not sure if we really need to
support that, so I'll leave it alone for now.
Note that -m takes precedence over OUTPUT_FORAMT, but we always parse
a BFD name given to OUTPUT_FORMAT for error checking. You cannot write
an invalid name in the OUTPUT_FORMAT directive.
Differential Revision: https://reviews.llvm.org/D53495
llvm-svn: 344952
Summary:
SymbolTable::addAbsolute() was removed in rL344305.
To me this is more readable than the lambda named `Add` and in our
out-of-tree CHERI target we use addAbsolute() in another function.
Reviewers: ruiu, espindola
Reviewed By: ruiu
Subscribers: kristina, emaste, llvm-commits
Differential Revision: https://reviews.llvm.org/D53393
llvm-svn: 344842
Normally one wouldn't run into that case, but it is possible with
a little creative ordering of special libraries.
Differential Revision: https://reviews.llvm.org/D53388
llvm-svn: 344776
Adjusted the range check on a call instruction from 24 bits signed to
26 bits signed. While the instruction only encodes 24 bits, the target is
assumed to be 4 byte aligned, and the value that is encoded in the instruction
gets shifted left by 2 to form the offset. Also added a check that the offset is
indeed at least 4 byte aligned.
Differential Revision: https://reviews.llvm.org/D53401
llvm-svn: 344747
All the PassBuilder::parse interfaces now return descriptive StringError
instead of a plain bool. It allows to make -passes/aa-pipeline parsing
errors context-specific and thus less confusing.
TODO: ideally we should also make suggestions for misspelled pass names,
but that requires some extensions to PassBuilder.
Reviewed By: philip.pfaffe, chandlerc
Differential Revision: https://reviews.llvm.org/D53246
llvm-svn: 344685
Recommitting https://reviews.llvm.org/rL344544 after fixing undefined behavior
from left-shifting a negative value. Original commit message:
This support is slightly different then the X86_64 implementation in that calls
to __morestack don't need to get rewritten to calls to __moresatck_non_split
when a split-stack caller calls a non-split-stack callee. Instead the size of
the stack frame requested by the caller is adjusted prior to the call to
__morestack. The size the stack-frame will be adjusted by is tune-able through a
new --split-stack-adjust-size option.
llvm-svn: 344622
This reverts commit https://reviews.llvm.org/rL344544, which causes failures on
a undefined behaviour sanitizer bot -->
lld/ELF/Arch/PPC64.cpp:849:35: runtime error: left shift of negative value -1
llvm-svn: 344551
This support is slightly different then the X86_64 implementation in that calls
to __morestack don't need to get rewritten to calls to __moresatck_non_split
when a split-stack caller calls a non-split-stack callee. Instead the size of
the stack frame requested by the caller is adjusted prior to the call to
__morestack. The size the stack-frame will be adjusted by is tune-able through a
new --split-stack-adjust-size option.
Differential Revision: https://reviews.llvm.org/D52099
llvm-svn: 344544
This is https://bugs.llvm.org/show_bug.cgi?id=39289.
Currently both gold and bfd report errors about invalid options values
even with -v/-versions. But LLD does not.
This makes complicated to check the options available when LLD is used.
Patch makes LLD behavior to be consistent with GNU linkers.
Differential revision: https://reviews.llvm.org/D53278
llvm-svn: 344514
`Type` parameter was used only to check for TLS attribute mismatch,
but we can do that when we actually replace symbols, so we don't need
to type as an argument. This change should simplify the interface of
the symbol table a bit.
llvm-svn: 344394
This a resubmission of a patch which was previously reverted
due to breaking several lld tests. The issues causing those
failures have been fixed, so the patch is now resubmitted.
---Original Commit Message---
While it doesn't make a *ton* of sense for POSIX paths to be
in PDBs, it's possible to occur in real scenarios involving
cross compilation.
The tools need to be able to handle this, because certain types
of debugging scenarios are possible without a running process
and so don't necessarily require you to be on a Windows system.
These include post-mortem debugging and binary forensics (e.g.
using a debugger to disassemble functions and examine symbols
without running the process).
There's changes in clang, LLD, and lldb in this patch. After
this the cross-platform disassembly and source-list tests pass
on Linux.
Furthermore, the behavior of LLD can now be summarized by a much
simpler rule than before: Unless you specify /pdbsourcepath and
/pdbaltpath, the PDB ends up with paths that are valid within
the context of the machine that the link is performed on.
Differential Revision: https://reviews.llvm.org/D53149
llvm-svn: 344377
If you have the string /usr/bin, prior to this patch it would not
be quoted by our YAML serializer. But a string like C:\src would
be, due to the presence of a backslash. This makes the quoting
rules of basically every single file path different depending on
the path syntax (posix vs. Windows).
While technically not required by the YAML specification to quote
forward slashes, when the behavior of paths is inconsistent it
makes it difficult to portably write FileCheck lines that will
work with either kind of path.
Differential Revision: https://reviews.llvm.org/D53169
llvm-svn: 344359
This reverts commit b86c16ad8c97dadc1f529da72a5bb74e9eaed344.
This is being reverted because I forgot to write a useful
commit message, so I'm going to resubmit it with an actual
commit message.
llvm-svn: 344358
Android uses a compressed relocation format, which means the size of the
relocation section isn't predictable based on the number of relocations,
and can vary if the layout changes in any way. To deal with this, the
linker normally runs multiple passes until the layout converges.
The layout should converge if the size of the compressed
relocation section increases monotonically: if the size of an encoded
offset increases by one byte, the larget value which can be encoded is
multiplied by 128, so the representable offsets grow much faster than
the size of the section itself.
The problem here is that there is no code to ensure the size of the
section doesn't decrease. If the size of the relocation section
decreases, the relative offsets can increase due to alignment
restrictions, so that can force the size of the relocation section to
increase again. The end result is an infinite loop; the loop gets cut
off after 10 iterations with the message "thunk creation not
converged".
To avoid this issue, this patch adds padding to the end of the
relocation section if its size would decrease. The extra
padding is harmless because of the way the format is defined:
decoding stops after it reaches the number of relocations specified
in the section's header.
Differential Revision: https://reviews.llvm.org/D53003
llvm-svn: 344300
This was originally causing some test failures on non-Windows
platforms, which required fixes in the compiler and linker. After
those fixes, however, other tests started failing. Reverting
temporarily until I can address everything.
llvm-svn: 344279
While it doesn't make a *ton* of sense for POSIX paths to be
in PDBs, it's possible to occur in real scenarios involving
cross compilation.
The tools need to be able to handle this, because certain types
of debugging scenarios are possible without a running process
and so don't necessarily require you to be on a Windows system.
These include post-mortem debugging and binary forensics (e.g.
using a debugger to disassemble functions and examine symbols
without running the process).
There's changes in clang, LLD, and lldb in this patch. After
this the cross-platform disassembly and source-list tests pass
on Linux.
Furthermore, the behavior of LLD can now be summarized by a much
simpler rule than before: Unless you specify /pdbsourcepath and
/pdbaltpath, the PDB ends up with paths that are valid within
the context of the machine that the link is performed on.
Differential Revision: https://reviews.llvm.org/D53149
llvm-svn: 344269
When these are accessed with load/store instructions on ARM64,
it becomes strictly necessary to have them properly aligned.
This fixes PR39228.
Differential Revision: https://reviews.llvm.org/D53128
llvm-svn: 344264
This is https://bugs.llvm.org/show_bug.cgi?id=37538,
Currently, LLD may set both sh_link and sh_info for
.rela.plt section to zero when we have only .rela.iplt section part used.
ELF spec (https://docs.oracle.com/cd/E19683-01/816-1386/chapter6-94076/index.html)
says that for SHT_REL and SHT_RELA, sh_link references the associated symbol table
and sh_info the "section to which the relocation applies."
When we set the sh_link field, for the regular case we use the .dynsym index.
For .rela.iplt sections, it is unclear what is the associated symbol table,
because R_*_RELATIVE relocations do not use symbol names and we might have no
.dynsym section at all so this patch uses .symtab section index.
Differential revision: https://reviews.llvm.org/D52830
llvm-svn: 344226
Summary:
Add a condition UnresolvedPolicy::Ignore to elf::warnUnorderedSymbol to suppress Sym->isUndefined() warnings from both
1) --symbol-ordering-file=
2) .llvm.call-graph-profile
If --unresolved-symbols=ignore-all is used,
no "undefined symbol" error/warning is emitted. It makes sense to not warn unorderable symbols.
Otherwise,
If an executable is linked, the default policy UnresolvedPolicy::ErrorOrWarn will issue a "undefined symbol" error. The unorderable symbol warning is redundant.
If a shared object is linked, it is possible that only part of object files are used and some symbols are left undefined. The warning is not very necessary.
In particular for .llvm.call-graph-profile, when linking a shared object, a call graph profile may contain undefined symbols. This case generated a warning before but it will be suppressed by this patch.
Reviewers: ruiu, davidxl, espindola
Reviewed By: ruiu
Subscribers: grimar, emaste, arichardson, llvm-commits
Differential Revision: https://reviews.llvm.org/D53044
llvm-svn: 344195
This allows using #pragma comment(lib, "foo") in MinGW built code,
if built with -fms-extensions. (This works for system libraries and
static libraries only, as it doesn't try to look for .dll.a. As
ld.bfd doesn't support embedded defaultlib directives, this isn't
in widespread use among mingw users.)
Differential Revision: https://reviews.llvm.org/D53017
llvm-svn: 344124
This is necessary for handling defaultlib directives embedded in
object files, unless they use an absolute path.
Differential Revision: https://reviews.llvm.org/D53015
llvm-svn: 344123
Summary: Before, OptTable::PrintHelp append "[options] <inputs>" to its parameter `Help`. It is more flexible to change its semantic to `Usage` and let user customize the usage line.
Reviewers: rupprecht, ruiu, espindola
Reviewed By: rupprecht
Subscribers: emaste, sbc100, arichardson, aheejin, llvm-commits
Differential Revision: https://reviews.llvm.org/D53054
llvm-svn: 344099
Previously, we cast a pointer to Elf{32,64}_Chdr like this
auto *Hdr = reinterpret_cast<const ELF64_Chdr>(Ptr);
and read from its members like this
read32(&Hdr->ch_size);
I was thinking that this does not violate alignment requirement,
since &Hdr->ch_size doesn't really access memory, but seems like
it is a violation in terms of C++ spec (?)
In this patch, I use a different struct that allows unaligned access.
llvm-svn: 344083
`SymbolTable` is a singleton class and is a global variable for the
unique instance, so we can always refer the symtab by `Symtab->`.
However, we don't need to use the global varaible from member functions
of SymbolTable class.
llvm-svn: 344075
/pdbsourcepath: was added in https://reviews.llvm.org/D48882 to make it
possible to have relative paths in the debug info that clang-cl writes.
lld-link then makes the paths absolute at link time, which debuggers require.
This way, clang-cl's output is independent of the absolute path of the build
directory, which is useful for cacheability in distcc-like systems.
This patch extends /pdbsourcepath: (if passed) to also be used for:
1. The "cwd" stored in the env block in the pdb is /pdbsourcepath: if present
2. The "exe" stored in the env block in the pdb is made absolute relative
to /pdbsourcepath: instead of the cwd
3. The "pdb" stored in the env block in the pdb is made absolute relative
to /pdbsourcepath: instead of the cwd
4. For making absolute paths to .obj files referenced from the pdb
/pdbsourcepath: is now useful in three scenarios (the first one already working
before this change):
1. When building with full debug info, passing the real build dir to
/pdbsourcepath: allows having clang-cl's output to be independent
of the build directory path. This patch effectively doesn't change
behavior for this use case (assuming the cwd is the build dir).
2. When building without compile-time debug info but linking with /debug,
a fake fixed /pdbsourcepath: can be passed to get symbolized stacks
while making the pdb and exe independent of the current build dir.
For this two work, lld-link needs to be invoked with relative paths for
the lld-link invocation itself (for "exe"), for the pdb output name, the exe
output name (for "pdb"), and the obj input files, and no absolute path
must appear on the link command (for "cmd" in the pdb's env block).
Since no full debug info is present, it doesn't matter that the absolute
path doesn't exist on disk -- we only get symbols in stacks.
3. When building production builds with full debug info that don't have
local changes, and that get source indexed and their pdbs get uploaded
to a symbol server. /pdbsourcepath: again makes the build output independent
of the current directory, and the fixed path passed to /pdbsourcepath: can
be given the source indexing transform so that it gets mapped to a
repository path. This has the same requirements as 2.
This patch also makes it possible to create PDB files containing Windows-style
absolute paths when cross-compiling on a POSIX system.
Differential Revision: https://reviews.llvm.org/D53021
llvm-svn: 344061
Previously, we uncompress all compressed sections before doing anything.
That works, and that is conceptually simple, but that could results in
a waste of CPU time and memory if uncompressed sections are then
discarded or just copied to the output buffer.
In particular, if .debug_gnu_pub{names,types} are compressed and if no
-gdb-index option is given, we wasted CPU and memory because we
uncompress them into newly allocated bufers and then memcpy the buffers
to the output buffer. That temporary buffer was redundant.
This patch changes how to uncompress sections. Now, compressed sections
are uncompressed lazily. To do that, `Data` member of `InputSectionBase`
is now hidden from outside, and `data()` accessor automatically expands
an compressed buffer if necessary.
If no one calls `data()`, then `writeTo()` directly uncompresses
compressed data into the output buffer. That eliminates the redundant
memory allocation and redundant memcpy.
This patch significantly reduces memory consumption (20 GiB max RSS to
15 Gib) for an executable whose .debug_gnu_pub{names,types} are in total
5 GiB in an uncompressed form.
Differential Revision: https://reviews.llvm.org/D52917
llvm-svn: 343979
This matches the output of binutils' nm and ensures that any scripts
or tools that use nm and expect empty output in case there no symbols
don't break.
Differential Revision: https://reviews.llvm.org/D52943
llvm-svn: 343887
ld.bfd doesn't do any inference of subsystem; unless the windows
subsystem is specified, the console subsystem is used.
For the console subsystem, the entry point is called mainCRTStartup,
regardless of whether the the user code entry point is main or wmain.
The same goes for the windows subsystem, where the entry point always
is WinMainCRTStartup, for both WinMain and wWinMain in user code.
One detail that we don't emulate, is that if the inferred entry point
is undefined, ld.bfd silently just sets the entry point to the start
of the image. And if an explicit entry point is set, but it is
undefined, the link still succeeds but the linker warns about the
entry point not being found.
Differential Revision: https://reviews.llvm.org/D52931
llvm-svn: 343879
For certain cases of inline functions written to comdat sections,
GCC 5.x produces a weak symbol in addition, which would end up
undefined in some cases.
This no longer seems to happen with GCC 6.x or newer though.
Differential Revision: https://reviews.llvm.org/D52602
llvm-svn: 343877
(patch by Benoit Rousseau)
This patch fixes a bug where the global variable initializers were sometimes not invoked in the correct order when it involved a C++ template instantiation.
Differential Revision: https://reviews.llvm.org/D52749
llvm-svn: 343847
The GOT is referenced through the symbol _GLOBAL_OFFSET_TABLE_ .
The relocation added calculates the offset into the global offset table for
the entry of a symbol. In order to get the correct TargetVA I needed to
create an new relocation expression, HEXAGON_GOT. It does
Sym.getGotVA() - In.GotPlt->getVA().
Differential Revision: https://reviews.llvm.org/D52744
llvm-svn: 343784
Simon Atanasyan