In Intel syntax, it's not uncommon to see a "short" modifier on Jcc conditional
jumps, which indicates the offset should be a "short jump" (8-bit immediate
offset from EIP, -128 to +127). This patch expands to all recognized Jcc
condition codes, and removes the inline restriction.
Clang already ignores "jmp short" in inline assembly. However, only "jmp" and a
couple of Jcc are actually checked, and only inline (i.e., not when using the
integrated assembler for asm sources). A quick search through asm-containing
libraries at hand shows a pretty broad range of Jcc conditions spelled with
"short."
GAS ignores the "short" modifier, and instead uses an encoding based on the
given immediate. MS inline seems to do the same, and I suspect MASM does, too.
NASM will yield an error if presented with an out-of-range immediate value.
Example of GCC 9.1 and MSVC v19.20, "jmp short" with offsets that do and do not
fit within 8 bits: https://gcc.godbolt.org/z/aFZmjY
Differential Revision: https://reviews.llvm.org/D61990
llvm-svn: 360954
Summary:
The complex DOT instructions perform a dot-product on quadtuplets from
two source vectors and the resuling wide real or wide imaginary is
accumulated into the destination register. The instructions come in two
forms:
Vector form, e.g.
cdot z0.s, z1.b, z2.b, #90 - complex dot product on four 8-bit quad-tuplets,
accumulating results in 32-bit elements. The
complex numbers in the second source vector are
rotated by 90 degrees.
cdot z0.d, z1.h, z2.h, #180 - complex dot product on four 16-bit quad-tuplets,
accumulating results in 64-bit elements.
The complex numbers in the second source
vector are rotated by 180 degrees.
Indexed form, e.g.
cdot z0.s, z1.b, z2.b[3], #0 - complex dot product on four 8-bit quad-tuplets,
with specified quadtuplet from second source vector,
accumulating results in 32-bit elements.
cdot z0.d, z1.h, z2.h[1], #0 - complex dot product on four 16-bit quad-tuplets,
with specified quadtuplet from second source vector,
accumulating results in 64-bit elements.
The specification can be found here:
https://developer.arm.com/docs/ddi0602/latest
Reviewed By: SjoerdMeijer, rovka
Differential Revision: https://reviews.llvm.org/D61903
llvm-svn: 360870
Summary:
Add support for the following instructions:
* MUL (indexed and unpredicated vectors forms)
* SQDMULH (indexed and unpredicated vectors forms)
* SQRDMULH (indexed and unpredicated vectors forms)
* SMULH (unpredicated, predicated form added in SVE)
* UMULH (unpredicated, predicated form added in SVE)
* PMUL (unpredicated)
The specification can be found here:
https://developer.arm.com/docs/ddi0602/latest
Reviewed By: SjoerdMeijer, rovka
Differential Revision: https://reviews.llvm.org/D61902
llvm-svn: 360867
LLVM previously used `DW_CFA_def_cfa` instruction in .eh_frame to set
the register and offset for current CFA rule. We change it to
`DW_CFA_def_cfa_register` which is the same one used by GAS that only
changes the register but keeping the old offset.
Patch by Mirko Brkusanin.
Differential Revision: https://reviews.llvm.org/D61899
llvm-svn: 360765
The 3-field form was introduced by D3499 in 2014 and the legacy 2-field
form was planned to be removed in LLVM 4.0
For the textual format, this patch migrates the existing 2-field form to
use the 3-field form and deletes the compatibility code.
test/Verifier/global-ctors-2.ll checks we have a friendly error message.
For bitcode, lib/IR/AutoUpgrade UpgradeGlobalVariables will upgrade the
2-field form (add i8* null as the third field).
Reviewed By: rnk, dexonsmith
Differential Revision: https://reviews.llvm.org/D61547
llvm-svn: 360742
Summary:
This patch adds support for the following instructions:
MLA mul-add, writing addend (Zda = Zda + Zn * Zm[idx])
MLS mul-sub, writing addend (Zda = Zda + -Zn * Zm[idx])
Predicated forms of these instructions were added in SVE.
The specification can be found here:
https://developer.arm.com/docs/ddi0602/latest
Reviewed By: rovka
Differential Revision: https://reviews.llvm.org/D61514
llvm-svn: 360682
On PowerPC64 ELFv2 ABI, the top 3 bits of st_other encode the local
entry offset. A versioned symbol alias created by .symver should copy
the bits from the source symbol.
This partly fixes PR41048. A full fix needs tracking of .set assignments
and updating st_other fields when finish() is called, see D56586.
Patch by Alfredo Dal'Ava Júnior
Differential Revision: https://reviews.llvm.org/D59436
llvm-svn: 360442
Summary:
The ".dword" directive is a synonym for ".xword" and is used used
by klibc, a minimalistic libc subset for initramfs.
Reviewers: t.p.northover, nickdesaulniers
Reviewed By: nickdesaulniers
Subscribers: nickdesaulniers, javed.absar, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61719
llvm-svn: 360381
Using SP in this position is unpredictable in ARMv7. CMP and CMN are not
affected, and of course v8 relaxes this requirement, but that's handled
elsewhere.
llvm-svn: 360242
This fixes the https://bugs.llvm.org/show_bug.cgi?id=41355.
Previously with -r we printed relocation section name instead of the target section name.
It was like this: "RELOCATION RECORDS FOR [.rel.text]"
Now it is: "RELOCATION RECORDS FOR [.text]"
Also when relocation target section has more than one relocation section,
we did not combine the output. Now we do.
Differential revision: https://reviews.llvm.org/D61312
llvm-svn: 360143
We require d/q suffixes on the memory form of these instructions to disambiguate the memory size.
We don't require it on the register forms, but need to support parsing both with and without it.
Previously we always printed the d/q suffix on the register forms, but it's redundant and
inconsistent with gcc and objdump.
After this patch we should support the d/q for parsing, but not print it when its unneeded.
llvm-svn: 360085
The x/y/z suffix is needed to disambiguate the memory form in at&t syntax since no xmm/ymm/zmm register is mentioned.
But we should also allow it for the register and broadcast forms where its not needed for consistency. This matches gas.
The printing code will still only use the suffix for the memory form where it is needed.
llvm-svn: 359903
The broadcasting variant for instruction vfpclassp[d,s] shouldn't use suffix q/l. So remove them from the template.
Patch by Pengfei Wang
Differential Revision: https://reviews.llvm.org/D61295
llvm-svn: 359753
Summary:
Triple components in `XFAIL` lines are tested against the target triple.
Various tests that are expected to fail on big-endian hosts are marked
as being `XFAIL` for big-endian targets. This patch corrects these tests
by having them test against a new `host-byteorder-big-endian` feature.
Reviewers: xingxue, sfertile, jasonliu
Reviewed By: xingxue
Subscribers: jvesely, nhaehnle, fedor.sergeev, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60551
llvm-svn: 359689
This improves readability and the behavior is consistent with GNU objdump.
The new test test/tools/llvm-objdump/X86/disassemble-section-name.s
checks we print newlines before and after "Disassembly of section ...:"
Differential Revision: https://reviews.llvm.org/D61127
llvm-svn: 359668
-t is --symbols in llvm-readobj but --section-details (unimplemented) in readelf.
The confusing option should not be used since we aim for improving
compatibility.
Keep just one llvm-readobj -t use case in test/tools/llvm-readobj/symbols.test
llvm-svn: 359661
We use both -long-option and --long-option in tests. Switch to --long-option for consistency.
In the "llvm-readelf" mode, -long-option is discouraged as it conflicts with grouped short options and it is not accepted by GNU readelf.
While updating the tests, change llvm-readobj -s to llvm-readobj -S to reduce confusion ("s" is --section-headers in llvm-readobj but --symbols in llvm-readelf).
llvm-svn: 359649
This patch adds aliases for element sizes .B/.H/.S to the
AND/ORR/EOR/BIC bitwise logical instructions. The assembler now accepts
these instructions with all element sizes up to 64-bit (.D). The
preferred disassembly is .D.
llvm-svn: 359457
The 128/256 bit version of these instructions require an 'x' or 'y' suffix to
disambiguate the memory form in att syntax.
We were allowing the same suffix in intel syntax, but it appears gas does not
do that.
gas does allow the 'x' and 'y' suffix on register and broadcast forms even
though its not needed. We were allowing it on unmasked register form, but not on
masked versions or on masked or unmasked broadcast form.
While there fix some test coverage holes so they can be extended with the 'x'
and 'y' suffix tests.
llvm-svn: 359418
This patch adds support for parsing and assembling the %tls_ie_pcrel_hi
and %tls_gd_pcrel_hi modifiers.
Differential Revision: https://reviews.llvm.org/D55342
llvm-svn: 358994
The manual says that Thumb2 add/sub instructions are only allowed to modify sp
if the first source is also sp. This is slightly different from the usual rGPR
restriction since it's context-sensitive, so implement it in C++.
llvm-svn: 358987
About the compressed sections spec says:
(https://docs.oracle.com/cd/E37838_01/html/E36783/section_compression.html)
sh_addralign fields of the section header for a compressed section
reflect the requirements of the compressed section.
Currently, llvm-mc always puts uncompressed section alignment to sh_addralign.
It is not correct. zlib styled section contains an Elfxx_Chdr header,
so we should either use 4 or 8 values depending on the target
(Uncompressed section alignment is stored in ch_addralign field of the compression header).
GNU assembler version 2.31.1 also has this issue,
but in 2.32.51 it was already fixed. This is how it was found
during debugging of the https://bugs.llvm.org/show_bug.cgi?id=40482
actually.
Differential revision: https://reviews.llvm.org/D60965
llvm-svn: 358960
Another attempt to land the changes in debug line header to prevent duplicate
files in Dwarf 5. I rolled back my previous commit because of a mistake in
generating the object file in a test. Meanwhile, I addressed some offline
comments and changed the implementation; the largest difference is that
MCDwarfLineTableHeader does not keep DwarfVersion but gets it as a parameter. I
also merged the patch to fix two lld tests that will strt to fail into this
patch.
Original Commit:
https://reviews.llvm.org/D59515
Original Message:
Motivation: In previous dwarf versions, file name indexes started from 1, and
the primary source file was not explicit. Dwarf 5 standard (6.2.4) prescribes
the primary source file to be explicitly given an entry with an index number 0.
The current implementation honors the specification by just duplicating the
main source file, once with index number 0, and later maybe with another
index number. While this is compliant with the letter of the standard, the
duplication causes problems for consumers of this information such as lldb.
(Some files are duplicated, where only some of them have a line table although
all refer to the same file)
With this change, dwarf 5 debug line section files always start from 0, and
the zeroth entry is not duplicated whenever possible. This requires different
handling of dwarf 4 and dwarf 5 during generation (e.g. when a function returns
an index zero for a file name, it signals an error in dwarf 4, but not in dwarf
5) However, I think the minor complication is worth it, because it enables all
consumers (lldb, gdb, dwarfdump, objdump, and so on) to treat all files in the
file name list homogenously.
llvm-svn: 358732
Summary:
This ensures that object files will continue to validate as
WebAssembly modules in the presence of bulk memory operations. Engines
that don't support bulk memory operations will not recognize the
DataCount section and will report validation errors, but that's ok
because object files aren't supposed to be run directly anyway.
Reviewers: aheejin, dschuff, sbc100
Subscribers: jgravelle-google, hiraditya, sunfish, rupprecht, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60623
llvm-svn: 358315
RISCVMCCodeEmitter::expandAddTPRel asserts that the second operand must be
x4/tp. As we are not currently checking this in the RISCVAsmParser, the assert
is easy to trigger due to wrong assembly input.
This patch does a late check of this constraint.
An alternative could be using a singleton register class for x4/tp similar to
the current one for sp. Unfortunately it does not result in a good diagnostic.
Because add is an overloaded mnemonic, if no matching is possible, the
diagnostic of the first failing alternative seems to be used as the diagnostic
itself. This means that this case the %tprel_add is diagnosed as an invalid
operand (because the real add instruction only has 3 operands).
Differential Revision: https://reviews.llvm.org/D60528
llvm-svn: 358183
Years ago I moved this to an InstAlias using VR128H/VR128L. But now that we support {vex3} pseudo prefix, we need to block the optimization when it is set to match gas behavior.
llvm-svn: 358046
The EVEX versions are ambiguous with the VEX versions based on operands alone so we had explicitly dropped
them from the AsmMatcher table. Unfortunately, when we add them they incorrectly show in the table before
their VEX counterparts. This is different how the prioritization normally works.
To fix this we have to explicitly reject the instructions unless the {evex} prefix has been seen.
llvm-svn: 358041
These can be used to force the encoding used for instructions.
{vex2} will fail if the instruction is not VEX encoded, but otherwise won't do anything since we prefer vex2 when possible. Might need to skip use of the _REV MOV instructions for this too, but I haven't done that yet.
{vex3} will force the instruction to use the 3 byte VEX encoding or fail if there is no VEX form.
{evex} will force the instruction to use the EVEX version or fail if there is no EVEX version.
Differential Revision: https://reviews.llvm.org/D59266
llvm-svn: 358029
This patch adds support in the MC layer for parsing and assembling the
4-operand add instruction needed for TLS addressing. This also involves
parsing the %tprel_hi, %tprel_lo and %tprel_add operand modifiers.
Differential Revision: https://reviews.llvm.org/D55341
llvm-svn: 357698
This patch fixes .arch_extension directive parsing to handle a wider
range of architecture extension options. The existing parser was parsing
extensions as an identifier which breaks for extensions containing a
"-", such as the "tlb-rmi" extension.
The extension is now parsed as a string. This is consistent with the
extension parsing in the .arch and .cpu directive parsing.
Patch by Cullen Rhodes (c-rhodes)
Reviewed By: SjoerdMeijer
Differential Revision: https://reviews.llvm.org/D60118
llvm-svn: 357677
The latest MTE specification adds register Xt to the STG instruction family:
STG [Xn, #offset] -> STG Xt, [Xn, #offset]
The tag written to memory is taken from Xt rather than Xn.
Also, the LDG instruction also was changed to read return address from Xt:
LDG Xt, [Xn, #offset].
This patch includes those changes and tests.
Specification is at: https://developer.arm.com/docs/ddi0596/c
Differential Revision: https://reviews.llvm.org/D60188
llvm-svn: 357583
Did experiments on power 9 machine, checked the outputs for NaN & Infinity+
cases with corresponding DCMX bit set. Confirmed the DCMX mask bit for NaN and
infinity+ are reversed.
This patch fixes the issue.
Patch by Victor Huang.
Differential Revision: https://reviews.llvm.org/D59384
llvm-svn: 357494
This patch allows symbols appended with @plt to parse and assemble with the
R_RISCV_CALL_PLT relocation.
Differential Revision: https://reviews.llvm.org/D55335
Patch by Lewis Revill.
llvm-svn: 357470
This instruction writes a block of allocation tags
and stores zero to the associated data locations.
It differs from STGM by 1 bit and has the same
arguments.
The specification can be found here:
https://developer.arm.com/docs/ddi0596/c
Differential Revision: https://reviews.llvm.org/D60065
llvm-svn: 357397
The STGV/LDGV instructions were replaced with
STGM/LDGM. The encodings remain the same but there
is no longer writeback so there are no unpredictable
encodings to check for.
The specfication can be found here:
https://developer.arm.com/docs/ddi0596/c
Differential Revision: https://reviews.llvm.org/D60064
llvm-svn: 357395
The latest version of the MTE spec added a system
register 'GMID_EL1'. It contains the block size used
by the LDGM and STGM instructions and is read only.
The specification can be found here:
https://developer.arm.com/docs/ddi0596/c
llvm-svn: 357392
A pcrel_lo will point to the associated pcrel_hi fixup which in turn points to
the real target. RISCVMCExpr::evaluatePCRelLo will work around this
indirection in order to allow the fixup to be evaluate properly. However, if
relocations are forced (e.g. due to linker relaxation is enabled) then its
evaluation is undesired and will result in a relocation with the wrong target.
This patch modifies evaluatePCRelLo so it will not try to evaluate if the
fixup will be forced as a relocation. A new helper method is added to
RISCVAsmBackend to query this.
Differential Revision: https://reviews.llvm.org/D59686
llvm-svn: 357374
Summary:
It does not currently make sense to use WebAssembly features in some functions
but not others, so this CL adds an IR pass that takes the union of all used
feature sets and applies it to each function in the module. This allows us to
prevent atomics from being lowered away if some function has opted in to using
them. When atomics is not enabled anywhere, we detect whether there exists any
atomic operations or thread local storage that would be stripped and disallow
linking with objects that contain atomics if and only if atomics or tls are
stripped. When atomics is enabled, mark it as used but do not require it of
other objects in the link. These changes allow libraries that do not use atomics
to be built once and linked into both single-threaded and multithreaded
binaries.
Reviewers: aheejin, sbc100, dschuff
Subscribers: jgravelle-google, hiraditya, sunfish, jfb, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59625
llvm-svn: 357226
This patch has three related fixes to improve float literal lexing:
1. Make AsmLexer::LexDigit handle floats without a decimal point more
consistently.
2. Make AsmLexer::LexFloatLiteral print an error for floats which are
apparently missing an "e".
3. Make APFloat::convertFromString use binutils-compatible exponent
parsing.
Together, this fixes some cases where a float would be incorrectly
rejected, fixes some cases where the compiler would crash, and improves
diagnostics in some cases.
Patch by Brandon Jones.
Differential Revision: https://reviews.llvm.org/D57321
llvm-svn: 357214
This patch fixes an assembler bug that allowed SVE vector registers to contain a
type suffix when not expected. The SVE unpredicated movprfx instruction is the
only instruction affected.
The following are examples of what was previously valid:
movprfx z0.b, z0.b
movprfx z0.b, z0.s
movprfx z0, z0.s
These instructions are now erroneous.
Patch by Cullen Rhodes (c-rhodes)
Reviewed By: sdesmalen
Differential Revision: https://reviews.llvm.org/D59636
llvm-svn: 357094
This reverts commit rL357020.
The commit broke the test llvm/test/tools/llvm-objdump/embedded-source.test
on some builds including clang-ppc64be-linux-multistage,
clang-s390x-linux, clang-with-lto-ubuntu, clang-x64-windows-msvc,
llvm-clang-lld-x86_64-scei-ps4-windows10pro-fast (and others).
llvm-svn: 357026
This change implements lowering of references global symbols in PIC
mode.
This change implements lowering of global references in PIC mode using a
new @GOT reference type. @GOT references can be used with function or
data symbol names combined with the get_global instruction. In this case
the linker will insert the wasm global that stores the address of the
symbol (either in memory for data symbols or in the wasm table for
function symbols).
For now I'm continuing to use the R_WASM_GLOBAL_INDEX_LEB relocation
type for this type of reference which means that this relocation type
can refer to either a global or a function or data symbol. We could
choose to introduce specific relocation types for GOT entries in the
future. See the current dynamic linking proposal:
https://github.com/WebAssembly/tool-conventions/blob/master/DynamicLinking.md
Differential Revision: https://reviews.llvm.org/D54647
llvm-svn: 357022
Reapply rL356941 after regenerating the object file in the failing test
llvm/test/tools/llvm-objdump/embedded-source.test from source.
Original commit message:
[llvm] Prevent duplicate files in debug line header in dwarf 5.
Motivation: In previous dwarf versions, file name indexes started from 1, and
the primary source file was not explicit. Dwarf 5 standard (6.2.4) prescribes
the primary source file to be explicitly given an entry with an index number 0.
The current implementation honors the specification by just duplicating the
main source file, once with index number 0, and later maybe with another
index number. While this is compliant with the letter of the standard, the
duplication causes problems for consumers of this information such as lldb.
(Some files are duplicated, where only some of them have a line table although
all refer to the same file)
With this change, dwarf 5 debug line section files always start from 0, and
the zeroth entry is not duplicated whenever possible. This requires different
handling of dwarf 4 and dwarf 5 during generation (e.g. when a function returns
an index zero for a file name, it signals an error in dwarf 4, but not in dwarf 5)
However, I think the minor complication is worth it, because it enables all
consumers (lldb, gdb, dwarfdump, objdump, and so on) to treat all files in the
file name list homogenously.
Tags: #llvm, #debug-info
Differential Revision: https://reviews.llvm.org/D59515
llvm-svn: 357018
This error can only happen if an unfinished operation is at Eof.
Patch by Brandon Jones
Differential Revision: https://reviews.llvm.org/D57379
llvm-svn: 356972
Summary:
Motivation: In previous dwarf versions, file name indexes started from 1, and
the primary source file was not explicit. Dwarf 5 standard (6.2.4) prescribes
the primary source file to be explicitly given an entry with an index number 0.
The current implementation honors the specification by just duplicating the
main source file, once with index number 0, and later maybe with another
index number. While this is compliant with the letter of the standard, the
duplication causes problems for consumers of this information such as lldb.
(Some files are duplicated, where only some of them have a line table although
all refer to the same file)
With this change, dwarf 5 debug line section files always start from 0, and
the zeroth entry is not duplicated whenever possible. This requires different
handling of dwarf 4 and dwarf 5 during generation (e.g. when a function returns
an index zero for a file name, it signals an error in dwarf 4, but not in dwarf 5)
However, I think the minor complication is worth it, because it enables all
consumers (lldb, gdb, dwarfdump, objdump, and so on) to treat all files in the
file name list homogenously.
Reviewers: dblaikie, probinson, aprantl, espindola
Reviewed By: probinson
Subscribers: emaste, jvesely, nhaehnle, aprantl, javed.absar, arichardson, hiraditya, MaskRay, rupprecht, jdoerfert, llvm-commits
Tags: #llvm, #debug-info
Differential Revision: https://reviews.llvm.org/D59515
llvm-svn: 356941
Now we have vec3 MVTs, this commit implements dwordx3 variants of the
buffer intrinsics.
On gfx6, a dwordx3 buffer load intrinsic is implemented as a dwordx4
instruction, and a dwordx3 buffer store intrinsic is not supported.
We need to support the dwordx3 load intrinsic because it is generated by
subtarget-unaware code in InstCombine.
Differential Revision: https://reviews.llvm.org/D58904
Change-Id: I016729d8557b98a52f529638ae97c340a5922a4e
llvm-svn: 356755
The RISC-V ISA defines RV32E as an alternative "base" instruction set
encoding, that differs from RV32I by having only 16 rather than 32 registers.
This patch adds basic definitions for RV32E as well as MC layer support
(assembling, disassembling) and tests. The only supported ABI on RV32E is
ILP32E.
Add a new RISCVFeatures::validate() helper to RISCVUtils which can be called
from codegen or MC layer libraries to validate the combination of TargetTriple
and FeatureBitSet. Other targets have similar checks (e.g. erroring if SPE is
enabled on PPC64 or oddspreg + o32 ABI on Mips), but they either duplicate the
checks (Mips), or fail to check for both codegen and MC codepaths (PPC).
Codegen for the ILP32E ABI support and RV32E codegen are left for a future
patch/patches.
Differential Revision: https://reviews.llvm.org/D59470
llvm-svn: 356744
Add more complete CHECK lines for the relocations generated when relaxation is
enabled, and add cases where a locally defined symbol is referenced.
Two instances of pcrel_lo(defined_symbol) are commented out, as they will
produce an error. A follow-up patch will fix this.
llvm-svn: 356734
My previous fix rL356591 "[AMDGPU] Added MsgPack format PAL metadata"
accidentally caused a spurious PAL metadata .note record to be emitted
for any AMDGPU output. That caused failures in the lld test
amdgpu-relocs.s. Fixed.
Differential Revision: https://reviews.llvm.org/D59613
Change-Id: Ie04a2aaae890dcd490f22c89edf9913a77ce070e
llvm-svn: 356621
Summary:
Implements a new target features section in assembly and object files
that records what features are used, required, and disallowed in
WebAssembly objects. The linker uses this information to ensure that
all objects participating in a link are feature-compatible and records
the set of used features in the output binary for use by optimizers
and other tools later in the toolchain.
The "atomics" feature is always required or disallowed to prevent
linking code with stripped atomics into multithreaded binaries. Other
features are marked used if they are enabled globally or on any
function in a module.
Future CLs will add linker flags for ignoring feature compatibility
checks and for specifying the set of allowed features, implement using
the presence of the "atomics" feature to control the type of memory
and segments in the linked binary, and add front-end flags for
relaxing the linkage policy for atomics.
Reviewers: aheejin, sbc100, dschuff
Subscribers: jgravelle-google, hiraditya, sunfish, mgrang, jfb, jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59173
llvm-svn: 356610
Summary:
PAL metadata now supports both the old linear reg=val pairs format and
the new MsgPack format.
The MsgPack format uses YAML as its textual representation. On output to
YAML, a mnemonic name is provided for some hardware registers.
Differential Revision: https://reviews.llvm.org/D57028
Change-Id: I2bbaabaaca4b3574f7e03b80fbef7c7a69d06a94
llvm-svn: 356591
Nothing prevents entries from being bigger than the 16 bit size field in
Dwarf < 5. For entries that are too big, just emit an empty entry
instead of crashing.
This fixes PR41038.
Reviewers: probinson, aprantl, davide
Reviewed By: probinson
Differential Revision: https://reviews.llvm.org/D59518
llvm-svn: 356514
Switch to the `MCParserUtils::parseAssignmentExpression` for parsing
assignment expressions in the `.set` directive reduces code and allows
to print an error message instead of crashing in case of incorrect
recursive using of the `.set`.
Fix for the bug https://bugs.llvm.org/show_bug.cgi?id=41053.
Differential Revision: http://reviews.llvm.org/D59452
llvm-svn: 356461
Allow the clamp modifier on vop3 int arithmetic instructions in assembly
and disassembly.
This involved adding a clamp operand to the affected instructions in MIR
and MC, and thus having to fix up several places in codegen and MIR
tests.
Differential Revision: https://reviews.llvm.org/D59267
Change-Id: Ic7775105f02a985b668fa658a0cd7837846a534e
llvm-svn: 356399
This commit allows v_cndmask_b32_e64 with abs, neg source
modifiers on src0, src1 to be assembled and disassembled.
This does appear to be allowed, even though they are floating point
modifiers and the operand type is b32.
To do this, I added src0_modifiers and src1_modifiers to the
MachineInstr, which involved fixing up several places in codegen and mir
tests.
Differential Revision: https://reviews.llvm.org/D59191
Change-Id: I69bf4a8c73ebc65744f6110bb8fc4e937d79fbea
llvm-svn: 356398
RISCVAsmParser::ParseRegister is called from AsmParser::parseRegisterOrNumber,
which in turn is called when processing CFI directives. The RISC-V
implementation wasn't setting RegNo, and so was incorrect. This patch address
that and adds cfi directive tests that demonstrate the fix. A follow-up patch
will factor out the register parsing logic shared between ParseRegister and
parseRegister.
llvm-svn: 356329
This isn't necessary according to the DWARF standard, but it matches the
.eh_frame sections emitted by other tools in practice, and the Android
libunwindstack rejects .eh_frame sections where an FDE refers to a CIE
other than the closest previous CIE. So match the other tools and also
sort accordingly.
I consider this a bug in libunwindstack, but it's easy enough to emit
a compatible .eh_frame section for compatibility with installed
operating systems.
Differential Revision: https://reviews.llvm.org/D58266
llvm-svn: 356216
On ARC ISA, general format of load instruction is this:
LD<zz><.x><.aa><.di> a, [b,c]
And general format of store is this:
ST<zz><.aa><.di> c, [b,s9]
Where:
<zz> is data size field and can be one of
<empty> (bits 00) - Word (32-bit), default behavior
B (bits 01) - Byte
H (bits 10) - Half-word (16-bit)
<.x> is data extend mode:
<empty> (bit 0) - If size is not Word(32-bit), then data is zero extended
X (bit 1) - If size is not Word(32-bit), then data is sign extended
<.aa> is address write-back mode:
<empty> (bits 00) - no write-back
.AW (bits 01) - Preincrement, base register updated pre memory transaction
.AB (bits 10) - Postincrement, base register updated post memory transaction
<.di> is cache bypass mode:
<empty> (bit 0) - Cached memory access, default mode
.DI (bit 1) - Non-cached data memory access
This patch adds these load/store instruction variants to the ARC backend.
Patch By Denis Antrushin! <denis@synopsys.com>
Differential Revision: https://reviews.llvm.org/D58980
llvm-svn: 356200
Summary:
MsgPackDocument is the lighter-weight replacement for MsgPackTypes. This
commit switches AMDGPU HSA metadata processing to use MsgPackDocument
instead of MsgPackTypes.
Differential Revision: https://reviews.llvm.org/D57024
Change-Id: I0751668013abe8c87db01db1170831a76079b3a6
llvm-svn: 356081
To provide mapping between standard and microMIPS R6 variants of the
`sw` command we have to rename SWSP_xxx commands from "sw" to "swsp".
Otherwise `tablegen` starts to show the error `Multiple matches found
for `SW'`. After that to restore printing SWSP command as `sw`, I add
an appropriate `MipsInstAlias` instance.
We also need to implement "size reduction" for microMIPS R6. But this
task is for separate patch. After that the `micromips-lwsp-swsp.ll` test
case will be extended.
Differential Revision: http://reviews.llvm.org/D59046
llvm-svn: 356045
If a symbol points to the end of a fragment, instead of searching for
fixups in that fragment, search in the next fragment.
Fixes spurious assembler error with subtarget change next to "la"
pseudo-instruction, or expanded equivalent.
Alternate proposal to fix the problem discussed in
https://reviews.llvm.org/D58759.
Testcase by Ana Pazos.
Differential Revision: https://reviews.llvm.org/D58943
llvm-svn: 355946
The RISC-V Assembly Programmer's Manual defines fp as another alias of x8.
However, our tablegen rules only recognise s0. This patch adds fp as another
alias of x8. GCC also accepts fp.
Differential Revision: https://reviews.llvm.org/D59209
Patch by Ferran Pallarès Roca.
llvm-svn: 355867
This patch adds proper handling of -target-abi, as accepted by llvm-mc and
llc. Lowering (codegen) for the hard-float ABIs will follow in a subsequent
patch. However, this patch does add MC layer support for the hard float and
RVE ABIs (emission of the appropriate ELF flags
https://github.com/riscv/riscv-elf-psabi-doc/blob/master/riscv-elf.md#-file-header).
ABI parsing must be shared between codegen and the MC layer, so we add
computeTargetABI to RISCVUtils. A warning will be printed if an invalid or
unrecognized ABI is given.
Differential Revision: https://reviews.llvm.org/D59023
llvm-svn: 355771
Summary:
Floating-point CSRs should be accessible even when F extension is not enabled.
But pseudo instructions that access floating point CSRs still require the F extension.
GNU tools already implement this behavior. RISC-V spec is pending update to reflect
this behavior and to extend it to pseudo instructions that access floating point CSRs.
Reviewers: asb
Reviewed By: asb
Subscribers: asb, rbar, johnrusso, simoncook, sabuasal, niosHD, kito-cheng, shiva0217, zzheng, edward-jones, rogfer01, MartinMosbeck, brucehoult, the_o, rkruppe, PkmX, jocewei, llvm-commits
Differential Revision: https://reviews.llvm.org/D58932
llvm-svn: 355753
The indexed variant of vfmal.f16 and vfmsl.f16
instructions use the uppser bits of the indexed
operand to store the index (1 bit for the double
variant, 2 bits for the quad).
This limits the usable registers to d0 - d7 or
s0 - s15. This patch enforces this limitation.
Differential Revision: https://reviews.llvm.org/D59021
llvm-svn: 355707
- Copy kernel symbol attributes into kernel descriptor attributes
- Make sure kernel symbol's visibility is not "higher" than protected
Differential Revision: https://reviews.llvm.org/D59057
llvm-svn: 355630
Emit an error for an unsupported relocation. mach-o relocations can't
encode the form -SYM + cst.
Differential Revision: https://reviews.llvm.org/D58944
llvm-svn: 355527
Implement MCInstrAnalysis for AMDGPU, with default implementations save
for `evaluateBranch`.
Differential Revision: https://reviews.llvm.org/D58400
llvm-svn: 355373
Summary:
This is quite minimal so far, introduce them with .section,
fill them with .int8 or .asciz, end with .size
Reviewers: dschuff, sbc100, aheejin
Subscribers: jgravelle-google, sunfish, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D58660
llvm-svn: 355321
This was sometimes causing clang or llvm-mc to crash, and in other
cases could emit a bogus DWARF line-table header. I did an interim
patch in r352541; this patch should be a cleaner and more complete
fix, and retains the test.
Addresses PR40538.
Differential Revision: https://reviews.llvm.org/D58750
llvm-svn: 355226
Summary:
This patch will obtain the section name for symbols that refer to a section. Prior to this patch the Name field for STT_SECTIONs was blank, now it is populated.
Before:
```
Symbol table '.symtab' contains 6 entries:
Num: Value Size Type Bind Vis Ndx Name
0: 0000000000000000 0 NOTYPE LOCAL DEFAULT UND
1: 0000000000000000 0 SECTION LOCAL DEFAULT 1
2: 0000000000000000 0 SECTION LOCAL DEFAULT 3
3: 0000000000000000 0 SECTION LOCAL DEFAULT 4
4: 0000000000000000 0 NOTYPE GLOBAL DEFAULT UND _GLOBAL_OFFSET_TABLE_
5: 0000000000000000 0 TLS GLOBAL DEFAULT UND sym
```
With this patch:
```
Symbol table '.symtab' contains 6 entries:
Num: Value Size Type Bind Vis Ndx Name
0: 0000000000000000 0 NOTYPE LOCAL DEFAULT UND
1: 0000000000000000 0 SECTION LOCAL DEFAULT 1 .text
2: 0000000000000000 0 SECTION LOCAL DEFAULT 3 .data
3: 0000000000000000 0 SECTION LOCAL DEFAULT 4 .bss
4: 0000000000000000 0 NOTYPE GLOBAL DEFAULT UND _GLOBAL_OFFSET_TABLE_
5: 0000000000000000 0 TLS GLOBAL DEFAULT UND sym
```
This fixes PR40788
Reviewers: jhenderson, rupprecht, espindola
Reviewed By: rupprecht
Subscribers: emaste, javed.absar, arichardson, MaskRay, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D58796
llvm-svn: 355207
Like the other load/store instructions, "w" register is preferred when
disassembling BPF_STX | BPF_W | BPF_XADD.
v1 -> v2:
- Updated testcase insn-unit.s (Yonghong)
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
llvm-svn: 355127
Summary:
In the clang UI, replaces -mthread-model posix with -matomics as the
source of truth on threading. In the backend, replaces
-thread-model=posix with the atomics target feature, which is now
collected on the WebAssemblyTargetMachine along with all other used
features. These collected features will also be used to emit the
target features section in the future.
The default configuration for the backend is thread-model=posix and no
atomics, which was previously an invalid configuration. This change
makes the default valid because the thread model is ignored.
A side effect of this change is that objects are never emitted with
passive segments. It will instead be up to the linker to decide
whether sections should be active or passive based on whether atomics
are used in the final link.
Reviewers: aheejin, sbc100, dschuff
Subscribers: mehdi_amini, jgravelle-google, hiraditya, sunfish, steven_wu, dexonsmith, rupprecht, jfb, jdoerfert, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D58742
llvm-svn: 355112
More or less all the instructions defined in the v8.2a full-fp16
extension are defined as UNPREDICTABLE if you put them in an IT block
(Thumb) or use with any condition other than AL (ARM). LLVM didn't
know that, and was happy to conditionalise them.
In order to force these instructions to count as not predicable, I had
to make a small Tablegen change. The code generation back end mostly
decides if an instruction was predicable by looking for something it
can identify as a predicate operand; there's an isPredicable bit flag
that overrides that check in the positive direction, but nothing that
overrides it in the negative direction.
(I considered the alternative approach of actually removing the
predicate operand from those instructions, but thought that it would
be more painful overall for instructions differing only in data type
to have different shapes of operand list. This way, the only code that
has to notice the difference is the if-converter.)
So I've added an isUnpredicable bit alongside isPredicable, and set
that bit on the right subset of FP16 instructions, and also on the
VSEL, VMAXNM/VMINNM and VRINT[ANPM] families which should be
unpredicable for all data types.
I've included a couple of representative regression tests, both of
which previously caused an fp16 instruction to be conditionalised in
ARM state and (with -arm-no-restrict-it) to be put in an IT block in
Thumb.
Reviewers: SjoerdMeijer, t.p.northover, efriedma
Reviewed By: efriedma
Subscribers: jdoerfert, javed.absar, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D57823
llvm-svn: 354768
We record the type of the symbol (event/function/data/global) in the
MCWasmSymbol and so it should always be clear how to handle a relocation
based on the symbol itself.
The exception is a function which still needs the special @TYPEINDEX
then the relocation contains the signature rather than the address
of the functions.
Differential Revision: https://reviews.llvm.org/D58472
llvm-svn: 354697
Allow load/store instructions with implied zero offset for compatibility with
GNU assembler.
Differential Revision: https://reviews.llvm.org/D57141
Patch by James Clarke.
llvm-svn: 354581
Summary:
Those pseudo-instructions are making load/store instructions able to
load/store from/to a symbol, and its always using PC-relative addressing
to generating a symbol address.
Reviewers: asb, apazos, rogfer01, jrtc27
Differential Revision: https://reviews.llvm.org/D50496
llvm-svn: 354430
Summary:
Fixed a bug in the routine in AsmParser that determines whether the
current instruction is a load or a store. Atomic instructions' prefixes
are not `atomic_` but `atomic.`, and all atomic instructions are also
memory instructions. Also fixed the printing format of atomic
instructions to match other memory instructions and added encoding tests
for atomic instructions.
Reviewers: aardappel, tlively
Subscribers: dschuff, sbc100, jgravelle-google, sunfish, jfb, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D58337
llvm-svn: 354419
Summary:
Rename MemoryIndex to InitFlags and implement logic for determining
data segment layout in ObjectYAML and MC. Also adds a "passive" flag
for the .section assembler directive although this cannot be assembled
yet because the assembler does not support data sections.
Reviewers: sbc100, aardappel, aheejin, dschuff
Subscribers: jgravelle-google, hiraditya, sunfish, rupprecht, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D57938
llvm-svn: 354397
When parsing a sequence of tokens beginning with {, it will hit an assert and crash if the token afterwards is not an identifier. Instead of this, return a more verbose error as seen elsewhere in the function.
Patch by Brandon Jones (BrandonTJones)
Differential Revision: https://reviews.llvm.org/D57375
llvm-svn: 354356
This patch also introduces the emitAuipcInstPair helper, which is then used
for both emitLoadAddress and emitLoadLocalAddress.
Differential Revision: https://reviews.llvm.org/D55325
Patch by James Clarke.
llvm-svn: 354111
We stil don't have a source location, which is pretty lame, but at least
we won't tell the user to file a clang bug report anymore.
Fixes PR40712
llvm-svn: 353907
Add a flag to allow symbols to have a wasm import name which differs from the
linker symbol name, allowing the linker to link code using the import_module
attribute.
This is the MC/Object portion of the patch.
Differential Revision: https://reviews.llvm.org/D57632
llvm-svn: 353474
JMP32 instructions has been added to eBPF ISA. They are 32-bit variants of
existing BPF conditional jump instructions, but the comparison happens on
low 32-bit sub-register only, therefore some unnecessary extensions could
be saved.
JMP32 instructions will only be available for -mcpu=v3. Host probe hook has
been updated accordingly.
JMP32 instructions will only be enabled in code-gen when -mattr=+alu32
enabled, meaning compiling the program using sub-register mode.
For JMP32 encoding, it is a new instruction class, and is using the
reserved eBPF class number 0x6.
This patch has been tested by compiling and running kernel bpf selftests
with JMP32 enabled.
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
llvm-svn: 353384
A quirk of the v8.1a spec is that when the writeback regiser for an atomic
read-modify-write instruction is wzr/xzr, the instruction no longer enforces
acquire ordering. However, it's still written with the misleading 'a' mnemonic.
So this adds an annotation when disassembling such instructions, mentioning the
change.
llvm-svn: 353303
r353131 caused failures in v128.const test for clang-ppc64be-linux-lnt
and clang-s390x-linux bots. This temporarily disables that line until
it is fixed.
llvm-svn: 353234
Summary:
Before r349976, MC ignored such directives when producing an object file
and asserted when re-producing textual assembly output. I turned this
assertion into a hard error in both cases in r349976, but this makes it
unnecessarily difficult to write a single assembly file that supports
both MachO and other object formats that support .file. A user reported
this as PR40578, and we decided to go back to ignoring the directive.
Fixes PR40578
Reviewers: mstorsjo
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D57772
llvm-svn: 353218
Summary:
There are a few instructions that all map to the same opcode, so
when disassembling, we have to pick one. That was just the first one
before (the except_ref variant in the case of "call"), now it is the
one marked as IsCanonical in tablegen, or failing that, the shortest
name (which is typically the "canonical" one).
Also introduced a canonical "end" instruction for this purpose.
Reviewers: dschuff, tlively
Subscribers: sbc100, jgravelle-google, aheejin, llvm-commits, sunfish
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D57713
llvm-svn: 353131
Aliases of functions are now marked as function symbols even if
they are bitcast to some other other non-function type.
This is important for WebAssembly where object and function
symbols can't alias each other.
Fixes PR38866
Differential Revision: https://reviews.llvm.org/D57538
llvm-svn: 353109
Summary:
These were "boilerplate" that repeated information already present
in .functype and end_function, that needed to be repeated to Please
the particular way our object writing works, and missing them would
generate errors.
Instead, we generate the information for these automatically so the
user can concern itself with writing more canonical wasm functions
that always work as expected.
Reviewers: dschuff, sbc100
Subscribers: jgravelle-google, aheejin, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D57546
llvm-svn: 353067
See https://github.com/WebAssembly/tool-conventions/pull/95.
This is less typing and IMHO more readable, and it also fits with
our naming around the binary format which tends to use the short name.
e.g.
include/llvm/BinaryFormat/Wasm.h
tools/llvm-objdump/WasmDump.cpp
etc..
Differential Revision: https://reviews.llvm.org/D57611
llvm-svn: 353062
All of these instructions consume one encoded register and the other register is %st. They either write the result to %st or the encoded register. Previously we printed both arguments when the encoded register was written. And we printed one argument when the result was written to %st. For the stack popping forms the encoded register is always the destination and we didn't print both operands. This was inconsistent with gcc and objdump and just makes the output assembly code harder to read.
This patch changes things to always print both operands making us consistent with gcc and objdump. The parser should still be able to handle the single register forms just as it did before. This also matches the GNU assembler behavior.
llvm-svn: 353061
Looking into gcc and objdump behavior more this was overly aggressive. If the register is encoded in the instruction we should print %st(0), if its implicit we should print %st.
I'll be making a more directed change in a future patch.
llvm-svn: 353013
Summary:
When calculating clobbers for MS style inline assembly we fail if the asm clobbers stack top because we print st(0) and try to pass it through the gcc register name check. This was found with when I attempted to make a emms/femms clobber all ST registers. If you use emms/femms in MS inline asm we would try to use st(0) as the clobber name but clang would think that wasn't a valid clobber name.
This also matches what objdump disassembly prints. It's also what is printed by gcc -S.
Reviewers: RKSimon, rnk, efriedma, spatel, andreadb, lebedev.ri
Reviewed By: rnk
Subscribers: eraman, gbedwell, lebedev.ri, llvm-commits
Differential Revision: https://reviews.llvm.org/D57621
llvm-svn: 352985
Summary:
NFC.
Adding MC regressions tests to cover all the SSE ISA sets as follows:
SSE, SSE2, SSE3, SSE4, SSE42, SSEMXCSR, SSE_PREFETCH, SSSE3
This patch is part of a larger task to cover MC encoding of all X86 ISA Sets.
See revision: https://reviews.llvm.org/D39952
Patch by Gadi Haber and Wang Tianqing
Reviewers: RKSimon, zvi, craig.topper, AndreiGrischenko, gadi.haber, LuoYuanke
Reviewed By: craig.topper
Subscribers: jfb, llvm-commits
Differential Revision: https://reviews.llvm.org/D40387
llvm-svn: 352955
Linker relaxation may change code size. We need to fix up the alignment
of alignment directive in text section by inserting Nops and R_RISCV_ALIGN
relocation type. So then linker could satisfy the alignment by removing Nops.
To do this:
1. Add shouldInsertExtraNopBytesForCodeAlign target hook to calculate
the Nops we need to insert.
2. Add shouldInsertFixupForCodeAlign target hook to insert
R_RISCV_ALIGN fixup type.
Differential Revision: https://reviews.llvm.org/D47755
llvm-svn: 352616
Summary:
This switches the EH implementation to the new proposal:
https://github.com/WebAssembly/exception-handling/blob/master/proposals/Exceptions.md
(The previous proposal was
https://github.com/WebAssembly/exception-handling/blob/master/proposals/old/Exceptions.md)
- Instruction changes
- Now we have one single `catch` instruction that returns a except_ref
value
- `throw` now can take variable number of operations
- `rethrow` does not have 'depth' argument anymore
- `br_on_exn` queries an except_ref to see if it matches the tag and
branches to the given label if true.
- `extract_exception` is a pseudo instruction that simulates popping
values from wasm stack. This is to make `br_on_exn`, a very special
instruction, work: `br_on_exn` puts values onto the stack only if it
is taken, and the # of values can vay depending on the tag.
- Now there's only one `catch` per `try`, this patch removes all special
handling for terminate pad with a call to `__clang_call_terminate`.
Before it was the only case there are two catch clauses (a normal
`catch` and `catch_all` per `try`).
- Make `rethrow` act as a terminator like `throw`. This splits BB after
`rethrow` in WasmEHPrepare, and deletes an unnecessary `unreachable`
after `rethrow` in LateEHPrepare.
- Now we stop at all catchpads (because we add wasm `catch` instruction
that catches all exceptions), this creates new
`findWasmUnwindDestinations` function in SelectionDAGBuilder.
- Now we use `br_on_exn` instrution to figure out if an except_ref
matches the current tag or not, LateEHPrepare generates this sequence
for catch pads:
```
catch
block i32
br_on_exn $__cpp_exception
end_block
extract_exception
```
- Branch analysis for `br_on_exn` in WebAssemblyInstrInfo
- Other various misc. changes to switch to the new proposal.
Reviewers: dschuff
Subscribers: sbc100, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D57134
llvm-svn: 352598
When --section-headers is used, GNU objdump prints both LMA and VMA for sections.
llvm-objdump does not do that what makes it's output be slightly inconsistent.
Patch teaches llvm-objdump to print LMA/VMA for ELF file formats.
The behavior for other formats remains unchanged.
Differential revision: https://reviews.llvm.org/D57146
llvm-svn: 352366
N_FUNC_COLD is a new MachO symbol attribute. It's a hint to the linker
to order a symbol towards the end of its section, to improve locality.
Example:
```
void a1() {}
__attribute__((cold)) void a2() {}
void a3() {}
int main() {
a1();
a2();
a3();
return 0;
}
```
A linker that supports N_FUNC_COLD will order _a2 to the end of the text
section. From `nm -njU` output, we see:
```
_a1
_a3
_main
_a2
```
Differential Revision: https://reviews.llvm.org/D57190
llvm-svn: 352227
Summary:
Using COFF's .def directive in module assembly used to crash ThinLTO
with "this directive only supported on COFF targets" when getting
symbol information in ModuleSymbolTable. This change allows
ModuleSymbolTable to process such code and adds a test to verify that
the .def directive has the desired effect on the native object file,
with and without ThinLTO.
Fixes https://bugs.llvm.org/show_bug.cgi?id=36789
Reviewers: rnk, pcc, vlad.tsyrklevich
Subscribers: mehdi_amini, eraman, hiraditya, dexonsmith, llvm-commits
Differential Revision: https://reviews.llvm.org/D57073
llvm-svn: 352112
Adding MC regressions tests to cover the AVX512F_SCALAR isa sets.
This patch is part of a larger task to cover MC encoding of all X86 isa sets started in revision: https://reviews.llvm.org/D39952
Differential Revision: https://reviews.llvm.org/D41174
llvm-svn: 351874
Summary:
objdump was interpreting the function header containing the locals
declaration as instructions. To parse these without injecting target
specific code in objdump, MCDisassembler::onSymbolStart was added to
be implemented by the WebAssembly implemention.
WasmObjectFile now returns a code offset for the "address" of a symbol,
rather than the index. This is also more in-line with what other
targets do.
Also ensured that the AsmParser correctly puts each function
in its own segment to enable this test case.
Reviewers: sbc100, dschuff
Subscribers: jgravelle-google, aheejin, sunfish, rupprecht, llvm-commits
Differential Revision: https://reviews.llvm.org/D56684
llvm-svn: 351460
Summary:
Everything before the word "version" is the tool, and everything after
the word "version" is the version.
Reviewers: aheejin, dschuff
Subscribers: sbc100, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D56742
llvm-svn: 351399
compiler identification lines in test-cases.
(Doing so only because it's then easier to search for references which
are actually important and need fixing.)
llvm-svn: 351200
Part of the effort to refactoring frame pointer code generation. We used
to use two function attributes "no-frame-pointer-elim" and
"no-frame-pointer-elim-non-leaf" to represent three kinds of frame
pointer usage: (all) frames use frame pointer, (non-leaf) frames use
frame pointer, (none) frame use frame pointer. This CL makes the idea
explicit by using only one enum function attribute "frame-pointer"
Option "-frame-pointer=" replaces "-disable-fp-elim" for tools such as
llc.
"no-frame-pointer-elim" and "no-frame-pointer-elim-non-leaf" are still
supported for easy migration to "frame-pointer".
tests are mostly updated with
// replace command line args ‘-disable-fp-elim=false’ with ‘-frame-pointer=none’
grep -iIrnl '\-disable-fp-elim=false' * | xargs sed -i '' -e "s/-disable-fp-elim=false/-frame-pointer=none/g"
// replace command line args ‘-disable-fp-elim’ with ‘-frame-pointer=all’
grep -iIrnl '\-disable-fp-elim' * | xargs sed -i '' -e "s/-disable-fp-elim/-frame-pointer=all/g"
Patch by Yuanfang Chen (tabloid.adroit)!
Differential Revision: https://reviews.llvm.org/D56351
llvm-svn: 351049
Teach x86 assembly operand parsing to distinguish between assembler
variable assigned to named registers and those assigned to immediate
values.
Reviewers: rnk, nickdesaulniers, void
Subscribers: hiraditya, jyknight, llvm-commits
Differential Revision: https://reviews.llvm.org/D56287
llvm-svn: 350966
* Teach AsmParser to recognize @rn in distination operand as 0(rn).
* Do not allow Disassembler decoding instructions that have size more
than a number of input bytes.
* Fix UB in MSP430MCCodeEmitter.
Patch by Kristina Bessonova!
Differential Revision: https://reviews.llvm.org/D56547
llvm-svn: 350903
Summary:
This is a third attempt, but this time we have vetted it on Windows
first. The previous errors were due to an uninitialized class member.
Reviewers: aheejin
Subscribers: dschuff, sbc100, jgravelle-google, sunfish, jfb, llvm-commits
Differential Revision: https://reviews.llvm.org/D56560
llvm-svn: 350901
This further improves compatibility with GNU as, allowing input such as the
following to be assembled:
.equ CONST, 0x123456
li a0, CONST
addi a0, a0, %lo(CONST)
.equ CONST, 1
slli a0, a0, CONST
Note that we don't have perfect compatibility with gas, as it will avoid
emitting a relocation in this case:
addi a0, a0, %lo(CONST2)
.equ CONST2, 0x123456
Thanks to Shiva Chen for suggesting a better way to approach this during review.
Differential Revision: https://reviews.llvm.org/D52298
llvm-svn: 350831
This is https://bugs.llvm.org/show_bug.cgi?id=37151,
GNU objdump spec says that "Normally the disassembly output will skip blocks of zeroes.",
but currently, llvm-objdump prints them.
The patch implements the -z/--disassemble-zeroes option and switches the default to always
skip blocks of zeroes.
Differential revision: https://reviews.llvm.org/D56083
llvm-svn: 350823
This is a second attempt at r350778, which was reverted in
r350789. The only change is that the unimplemented-simd128 feature has
been renamed simd128-unimplemented, since naming it
unimplemented-simd128 somehow made the simd128 feature flag enable the
unimplemented-simd128 feature on Windows.
llvm-svn: 350791
Summary:
This replaces the old ad-hoc -wasm-enable-unimplemented-simd
flag. Also makes the new unimplemented-simd128 feature imply the
simd128 feature.
Reviewers: aheejin, dschuff
Subscribers: sbc100, jgravelle-google, sunfish, llvm-commits, alexcrichton
Differential Revision: https://reviews.llvm.org/D56501
llvm-svn: 350778
Follow up patch of rL350385, for adding predres
command line option. This patch renames the
feature as to keep it aligned with the option
passed by/to clang
Differential Revision: https://reviews.llvm.org/D56484
llvm-svn: 350702
For stack frames on the size of a register in x86, a code size optimization
emits "push rax/eax" instead of "sub" for stack allocation. For example:
foo:
.cfi_startproc
BB#0:
pushq %rax
Ltmp0:
.cfi_def_cfa_offset 16
...
.cfi_endproc
However, we are falling back to DWARF in this case because we cannot
encode %rax as a saved register.
This requirement is wrong, since we don't care about the contents of
%rax, it is the equivalent of a sub.
In order to specify that we care about the contents of %rax, we would
need a .cfi_offset %rax, <offset>.
It's also overzealous in the case where there are pushes for callee saved
registers followed by a "push rax/eax" instead of "sub", in which case we should
also be able to encode the callee saved regs and everything else using compact
unwind.
Patch authored by Bruno Cardoso Lopes.
Differential Revision: https://reviews.llvm.org/D13793
llvm-svn: 350623
Summary:
The previously introduced new operand type for br_table didn't have
a disassembler implementation, causing an assert.
Reviewers: dschuff, aheejin
Subscribers: sbc100, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D56227
llvm-svn: 350366
Summary:
Instead of asserting on certain kinds of malformed instructions, it
now still print, but instead adds an annotation indicating the
problem, and/or indicates invalid_type etc.
We're using the InstPrinter from many contexts that can't always
guarantee values are within range (e.g. the disassembler), where having
output is more valueable than asserting.
Reviewers: dschuff, aheejin
Subscribers: sbc100, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D56223
llvm-svn: 350365
Make sure all print statements are compatible with Python 2 and Python3 using
the `from __future__ import print_function` statement.
Differential Revision: https://reviews.llvm.org/D56249
llvm-svn: 350307
SB (Speculative Barrier) is only mandatory from 8.5
onwards but is optional from Armv8.0-A. This patch adds a command
line option to enable SB, as it was previously only possible to
enable by selecting -march=armv8.5-a.
This patch also renames FeatureSpecRestrict to FeatureSB.
Reviewed By: olista01, LukeCheeseman
Differential Revision: https://reviews.llvm.org/D55990
llvm-svn: 350299
There can be multiple local symbols with the same name (for e.g.
comdat sections), and thus the symbol name itself isn't enough
to disambiguate symbols.
Differential Revision: https://reviews.llvm.org/D56140
llvm-svn: 350288
Summary:
This was previously ignored and an incorrect value generated.
Also fixed Disassembler's handling of block_type.
Reviewers: dschuff, aheejin
Subscribers: sbc100, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D56092
llvm-svn: 350270
Adding MC regressions tests to cover the XOP isa set.
This patch is part of a larger task to cover MC encoding of all X86 isa sets started in revision: https://reviews.llvm.org/D39952
Differential Revision: https://reviews.llvm.org/D41392
llvm-svn: 350237
The following code requests 64-bit PC-relative relocations unsupported
by MIPS ABI. Now it triggers an assertion. It's better to show an error
message.
```
foo:
.quad bar - foo
```
llvm-svn: 350152
SB (Speculative Barrier) is only mandatory from 8.5
onwards but is optional from Armv8.0-A. This patch adds a command
line option to enable SB, as it was previously only possible to
enable by selecting -march=armv8.5-a.
This patch also moves to FeatureSB the old FeatureSpecRestrict.
Reviewers: pbarrio, olista01, t.p.northover, LukeCheeseman
Differential Revision: https://reviews.llvm.org/D55921
llvm-svn: 350126
Summary:
These instructions are currently unused in our backend, but for
completeness it is good to support them, so they can be used with
the assembler in hand-written code.
Tests are very basic, signature support missing much like other blocks.
Reviewers: dschuff, aheejin
Subscribers: sbc100, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D55973
llvm-svn: 350079
Summary:
It does so using a simple nesting stack, and gives clear errors upon
violation. This is unique to wasm, since most CPUs do not have
any nested constructs.
Had to add an end of file check to the general assembler for this.
Note: if/else/end instructions are not currently supported in our
tablegen defs, so these tests will be enabled in a follow-up.
They already pass the nesting check.
Reviewers: dschuff, aheejin
Subscribers: sbc100, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D55797
llvm-svn: 350078
Summary:
The "single parameter" .file directive appears to be an ELF-only feature
that is intended to insert the main source filename into the string
table table.
I noticed that if you assemble an ELF .s file for COFF, typically it
will assert right away on a .file directive near the top of the file. My
first change was to make this emit a proper error in the asm parser so
that we don't assert so easily.
However, COFF actually does have some support for this directive, and if
you emit an object file, llvm-mc does not assert. When emitting a COFF
object, MC will take those file names and create "debug" symbol table
entries for them. I'm not familiar with these kinds of symbol table
entries, and I'm not aware of any users of them, but @compnerd added
them a while ago. They don't introduce absolute paths, and most main
source file paths are short enough that this extra entry shouldn't cause
any problems, so I enabled the flag in MCAsmInfoCOFF that indicates that
it's supported.
This has the side effect of adding an extra debug symbol to every object
produced by clang, which is a pretty big functional change. My question
is, should we keep the functionality or remove it in the name of symbol
table minimalism?
Reviewers: mstorsjo, compnerd
Subscribers: hiraditya, compnerd, llvm-commits
Differential Revision: https://reviews.llvm.org/D55900
llvm-svn: 349976
- When signing return addresses with -msign-return-address=<scope>{+<key>},
either the A key instructions or the B key instructions can be used. To
correctly authenticate the return address, the unwinder/debugger must know
which key was used to sign the return address.
- When and exception is thrown or a break point reached, it may be necessary to
unwind the stack. To accomplish this, the unwinder/debugger must be able to
first authenticate an the return address if it has been signed.
- To enable this, the augmentation string of CIEs has been extended to allow
inclusion of a 'B' character. Functions that are signed using the B key
variant of the instructions should have and FDE whose associated CIE has a 'B'
in the augmentation string.
- One must also be able to preserve these semantics when first stepping from a
high level language into assembly and then, as a second step, into an object
file. To achieve this, I have introduced a new assembly directive
'.cfi_b_key_frame ', that tells the assembler the current frame uses return
address signing with the B key.
- This ensures that the FDE is associated with a CIE that has 'B' in the
augmentation string.
Differential Revision: https://reviews.llvm.org/D51798
llvm-svn: 349895
We have to treat constructs like this as if they were "symbolic", to use
the correct codepath to resolve them. This mostly only affects movz
etc. because the other uses of classifySymbolRef conservatively treat
everything that isn't a constant as if it were a symbol.
Differential Revision: https://reviews.llvm.org/D55906
llvm-svn: 349800
This requires a bit more code than other fixups, to distingush between
abs_g0/abs_g1/etc. Actually, I think some of the other fixups are
missing some checks, but I won't try to address that here.
I haven't seen any real-world code that uses a construct like this, but
it clearly should work, and we're considering using it in the
implementation of localescape/localrecover on Windows (see
https://reviews.llvm.org/D53540). I've verified that binutils produces
the same code as llvm-mc for the testcase.
This currently doesn't include support for the *_s variants (that
requires a bit more work to set the opcode).
Differential Revision: https://reviews.llvm.org/D55896
llvm-svn: 349799
This is a update to D43157 to correctly handle fixup_riscv_pcrel_lo12.
Notable changes:
Rebased onto trunk
Handle and test S-type
Test case pcrel-hilo.s is merged into relocations.s
D43157 description:
VK_RISCV_PCREL_LO has to be handled specially. The MCExpr inside is
actually the location of an auipc instruction with a VK_RISCV_PCREL_HI fixup
pointing to the real target.
Differential Revision: https://reviews.llvm.org/D54029
Patch by Chih-Mao Chen and Michael Spencer.
llvm-svn: 349764
Summary:
We use `variable_ops` in the tablegen defs to denote the list of
branch targets in `br_table`, but unlike other uses of `variable_ops`
(e.g. call) the these branch targets need to actually be encoded in the
instruction. The existing tables for `variable_ops` cause not operands
to be accepted by the assembly matcher.
Following the example of ARM:
2cc0a7da87/lib/Target/ARM/ARMInstrInfo.td (L550-L555)
we introduce a new operand type to capture this list, and we use the
same {} syntax as ARM as well to differentiate them from regular
integer operands.
Also removed definition and use of TSFlags in tablegen defs, since
`br_table` now has a non-variable_ops immediate operand, so the
previous logic of only the variable_ops arguments being labels didn't
make sense anymore.
Reviewers: dschuff, aheejin, sunfish
Subscribers: javed.absar, sbc100, jgravelle-google, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D55401
llvm-svn: 349405
This was a pre-existing bug that could be triggered with assembly like
this:
.p2align 2
.LtmpN:
.cv_def_range "..."
I noticed this when attempting to change clang to emit aligned symbol
records.
llvm-svn: 349403
Summary: It looks like this support was added to match GNU AS, but only tests
.float and not .double. I asked RedHat folks to confirm that 0x7fffffffffffffff
was indeed the right value for NaN.
Same for infinity, but it only has positive / negative encodings.
Reviewers: scanon, rjmccall
Subscribers: jkorous, dexonsmith, llvm-commits
Differential Revision: https://reviews.llvm.org/D55531
llvm-svn: 349376
build version load commands in the object file
This commit introduces a new metadata node called "SDK Version". It will be set
by the frontend to mark the platform SDK (macOS/iOS/etc) version which was used
during that particular compilation.
This node is used when machine code is emitted, by either saving the SDK version
into the appropriate macho load command (version min/build version), or by
emitting the assembly for these load commands with the SDK version specified as
well.
The assembly for both load commands is extended by allowing it to contain the
sdk_version X, Y [, Z] trailing directive to represent the SDK version
respectively.
rdar://45774000
Differential Revision: https://reviews.llvm.org/D55612
llvm-svn: 349119
On 32-bit archs, before, we would assume that an indirect symbol will
never have local linkage. This can lead to miscompiles where the
symbol's value would be 0 and the linker would use that value, because
the indirect symbol table would contain the value
`INDIRECT_SYMBOL_LOCAL` for that specific symbol.
Differential Revision: https://reviews.llvm.org/D55573
llvm-svn: 349060
Summary: The Sparc V9 membar instruction can enforce different types of
memory orderings depending on the value in its immediate field. In the
architectural manual the type is selected by combining different assembler
tags into a mask. This patch adds support for these tags.
Reviewers: jyknight, venkatra, brad
Reviewed By: jyknight
Subscribers: fedor.sergeev, jrtc27, jfb, llvm-commits
Differential Revision: https://reviews.llvm.org/D53491
llvm-svn: 349048
Continue to present HSA metadata as YAML in ASM and when output by tools
(e.g. llvm-readobj), but encode it in Messagepack in the code object.
Differential Revision: https://reviews.llvm.org/D48179
llvm-svn: 348963
Summary:
Emit COFF header when printing out the function. This is important as the
header contains two important pieces of information: the storage class for the
symbol and the symbol type information. This bit of information is required for
the linker to correctly identify the type of symbol that it is dealing with.
This patch mimics X86 and ARM COFF behavior for function header emission.
Reviewers: rnk, mstorsjo, compnerd, TomTan, ssijaric
Reviewed By: mstorsjo
Subscribers: dmajor, javed.absar, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D55535
llvm-svn: 348875
Summary:
This patch supports `.eventtype` directive printing and parsing in the
same syntax with `.functype`.
Reviewers: aardappel, sbc100
Subscribers: dschuff, sbc100, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D55353
llvm-svn: 348818
When replacing jal with jalr, also emit '.reloc R_MIPS_JALR' (R_MICROMIPS_JALR
for micromips). The linker might then be able to turn jalr into a direct
call.
Add '-mips-jalr-reloc' to enable/disable this feature (default is true).
Differential revision: https://reviews.llvm.org/D55292
llvm-svn: 348760
This patch splits backend features currently
hidden behind architecture versions.
For example, currently the only way to activate
complex numbers extension is targeting an v8.3
architecture, where after the patch this extension
can be added separately.
This refactoring is required by the new command lines proposal:
http://lists.llvm.org/pipermail/llvm-dev/2018-September/126346.html
Reviewers: DavidSpickett, olista01, t.p.northover
Subscribers: kristof.beyls, bryanpkc, javed.absar, pbarrio
Differential revision: https://reviews.llvm.org/D54633
--
It was reverted in rL348249 due a build bot failure in one of the
regression tests:
http://lab.llvm.org:8011/builders/llvm-clang-x86_64-expensive-checks-win/builds/14386
The problem seems to be that FileCheck behaves
different in windows and linux. This new patch
splits the test file in multiple,
and does more exact pattern matching attempting
to circumvent the issue.
llvm-svn: 348493
Summary:
We decided to change the event section code from 12 to 13 as new
`DataCount` section in the bulk memory operations proposal will take the
code 12 instead.
Reviewers: sbc100
Subscribers: dschuff, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D55343
llvm-svn: 348424
David L. Jones