This reverts commit 80a34ae311 with fixes.
On bots llvm-clang-x86_64-expensive-checks-ubuntu and
llvm-clang-x86_64-expensive-checks-debian only,
llc returns 0 for these two tests unexpectedly. I tweaked the RUN line a little
bit in the hope that LIT is the culprit since this change is not in the
codepath these tests are testing.
llvm\test\CodeGen\X86\inline-asm-avx-v-constraint-32bit.ll
llvm\test\CodeGen\X86\inline-asm-avx512vl-v-constraint-32bit.ll
This reverts commit rGcd5b308b828e, rGcd5b308b828e, rG8cedf0e2994c.
There are issues to be investigated for polly bots and bots turning on
EXPENSIVE_CHECKS.
Currently there are 4 different mechanisms for controlling denormal
flushing behavior, and about as many equivalent frontend controls.
- AMDGPU uses the fp32-denormals and fp64-f16-denormals subtarget features
- NVPTX uses the nvptx-f32ftz attribute
- ARM directly uses the denormal-fp-math attribute
- Other targets indirectly use denormal-fp-math in one DAGCombine
- cl-denorms-are-zero has a corresponding denorms-are-zero attribute
AMDGPU wants a distinct control for f32 flushing from f16/f64, and as
far as I can tell the same is true for NVPTX (based on the attribute
name).
Work on consolidating these into the denormal-fp-math attribute, and a
new type specific denormal-fp-math-f32 variant. Only ARM seems to
support the two different flush modes, so this is overkill for the
other use cases. Ideally we would error on the unsupported
positive-zero mode on other targets from somewhere.
Move the logic for selecting the flush mode into the compiler driver,
instead of handling it in cc1. denormal-fp-math/denormal-fp-math-f32
are now both cc1 flags, but denormal-fp-math-f32 is not yet exposed as
a user flag.
-cl-denorms-are-zero, -fcuda-flush-denormals-to-zero and
-fno-cuda-flush-denormals-to-zero will be mapped to
-fp-denormal-math-f32=ieee or preserve-sign rather than the old
attributes.
Stop emitting the denorms-are-zero attribute for the OpenCL flag. It
has no in-tree users. The meaning would also be target dependent, such
as the AMDGPU choice to treat this as only meaning allow flushing of
f32 and not f16 or f64. The naming is also potentially confusing,
since DAZ in other contexts refers to instructions implicitly treating
input denormals as zero, not necessarily flushing output denormals to
zero.
This also does not attempt to change the behavior for the current
attribute. The LangRef now states that the default is ieee behavior,
but this is inaccurate for the current implementation. The clang
handling is slightly hacky to avoid touching the existing
denormal-fp-math uses. Fixing this will be left for a future patch.
AMDGPU is still using the subtarget feature to control the denormal
mode, but the new attribute are now emitted. A future change will
switch this and remove the subtarget features.
Summary:
This patch could be treated as a rebase of D33960. It also fixes PR35547.
A fix for `llvm/test/Other/close-stderr.ll` is proposed in D68164. Seems
the consensus is that the test is passing by chance and I'm not
sure how important it is for us. So it is removed like in D33960 for now.
The rest of the test fixes are just adding `--crash` flag to `not` tool.
** The reason it fixes PR35547 is
`exit` does cleanup including calling class destructor whereas `abort`
does not do any cleanup. In multithreading environment such as ThinLTO or JIT,
threads may share states which mostly are ManagedStatic<>. If faulting thread
tearing down a class when another thread is using it, there are chances of
memory corruption. This is bad 1. It will stop error reporting like pretty
stack printer; 2. The memory corruption is distracting and nondeterministic in
terms of error message, and corruption type (depending one the timing, it
could be double free, heap free after use, etc.).
Reviewers: rnk, chandlerc, zturner, sepavloff, MaskRay, espindola
Reviewed By: rnk, MaskRay
Subscribers: wuzish, jholewinski, qcolombet, dschuff, jyknight, emaste, sdardis, nemanjai, jvesely, nhaehnle, sbc100, arichardson, jgravelle-google, aheejin, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, zzheng, edward-jones, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, PkmX, jocewei, jsji, lenary, s.egerton, pzheng, cfe-commits, MaskRay, filcab, davide, MatzeB, mehdi_amini, hiraditya, steven_wu, dexonsmith, rupprecht, seiya, llvm-commits
Tags: #llvm, #clang
Differential Revision: https://reviews.llvm.org/D67847
Also, amend constraints for non-sync variants that are no longer
available on sm_70+ with PTX6.4+.
Differential Revision: https://reviews.llvm.org/D68892
llvm-svn: 374790
Summary:
- Use the passed `DL` directly as retrieving data layout from CS by
checking the called function is not reliable. Under indirect function
call, there is no called function.
Subscribers: jholewinski, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65468
llvm-svn: 367349
Summary:
Targets like ARM, MSP430, PPC, and SystemZ have complex behavior when
printing the address of a MachineOperand::MO_GlobalAddress. Move that
handling into a new overriden method in each base class. A virtual
method was added to the base class for handling the generic case.
Refactors a few subclasses to support the target independent %a, %c, and
%n.
The patch also contains small cleanups for AVRAsmPrinter and
SystemZAsmPrinter.
It seems that NVPTXTargetLowering is possibly missing some logic to
transform GlobalAddressSDNodes for
TargetLowering::LowerAsmOperandForConstraint to handle with "i" extended
inline assembly asm constraints.
Fixes:
- https://bugs.llvm.org/show_bug.cgi?id=41402
- https://github.com/ClangBuiltLinux/linux/issues/449
Reviewers: echristo, void
Reviewed By: void
Subscribers: void, craig.topper, jholewinski, dschuff, jyknight, dylanmckay, sdardis, nemanjai, javed.absar, sbc100, jgravelle-google, eraman, kristof.beyls, hiraditya, aheejin, kbarton, fedor.sergeev, jrtc27, atanasyan, jsji, llvm-commits, kees, tpimh, nathanchance, peter.smith, srhines
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60887
llvm-svn: 359337
All of the new instructions are still handled mostly by tablegen. I've slightly
refactored the code to drive intrinsic/instruction generation from a master
list of supported variants, so all irregularities have to be implemented in one place only.
The test generation script wmma.py has been refactored in a similar way.
Differential Revision: https://reviews.llvm.org/D60015
llvm-svn: 359247
PTX 6.3 requires using ".aligned" in the MMA instruction names.
In order to generate correct name, now we pass current
PTX version to each instruction as an extra constant operand
and InstPrinter adjusts its output accordingly.
Differential Revision: https://reviews.llvm.org/D59393
llvm-svn: 359246
Summary:
Previously, we translate llvm.round to PTX cvt.rni, which rounds to the
even interger when the source is equidistant between two integers. This
is not correct as llvm.round should round away from zero. This change
replaces llvm.round with a round away from zero implementation through
target specific custom lowering.
Modify a few affected tests to not check for cvt.rni. Instead, we check
for the use of a few constants used in implementing round. We are also
adding CUDA runnable tests to check for the values produced by
llvm.round to test-suites/External/CUDA.
Reviewers: tra
Subscribers: jholewinski, sanjoy, jlebar, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59947
llvm-svn: 357407
These intrinsics may return different values every time they are called
and should not be CSE'd. IntrInaccessibleMemOnly appears to be the right
attribute to model this behavior.
Differential Revision: https://reviews.llvm.org/D57259
llvm-svn: 352256
Part of the effort to refactoring frame pointer code generation. We used
to use two function attributes "no-frame-pointer-elim" and
"no-frame-pointer-elim-non-leaf" to represent three kinds of frame
pointer usage: (all) frames use frame pointer, (non-leaf) frames use
frame pointer, (none) frame use frame pointer. This CL makes the idea
explicit by using only one enum function attribute "frame-pointer"
Option "-frame-pointer=" replaces "-disable-fp-elim" for tools such as
llc.
"no-frame-pointer-elim" and "no-frame-pointer-elim-non-leaf" are still
supported for easy migration to "frame-pointer".
tests are mostly updated with
// replace command line args ‘-disable-fp-elim=false’ with ‘-frame-pointer=none’
grep -iIrnl '\-disable-fp-elim=false' * | xargs sed -i '' -e "s/-disable-fp-elim=false/-frame-pointer=none/g"
// replace command line args ‘-disable-fp-elim’ with ‘-frame-pointer=all’
grep -iIrnl '\-disable-fp-elim' * | xargs sed -i '' -e "s/-disable-fp-elim/-frame-pointer=all/g"
Patch by Yuanfang Chen (tabloid.adroit)!
Differential Revision: https://reviews.llvm.org/D56351
llvm-svn: 351049
Make sure all print statements are compatible with Python 2 and Python3 using
the `from __future__ import print_function` statement.
Differential Revision: https://reviews.llvm.org/D56249
llvm-svn: 350307
The patch adds a possibility to make library calls on NVPTX.
An important thing about library functions - they must be defined within
the current module. This basically should guarantee that we produce a
valid PTX assembly (without calls to not defined functions). The one who
wants to use the libcalls is probably will have to link against
compiler-rt or any other implementation.
Currently, it's completely impossible to make library calls because of
error LLVM ERROR: Cannot select: i32 = ExternalSymbol '...'. But we can
lower ExternalSymbol to TargetExternalSymbol and verify if the function
definition is available.
Also, there was an issue with a DAG during legalisation. When we expand
instruction into libcall, the inner call-chain isn't being "integrated"
into outer chain. Since the last "data-flow" (call retval load) node is
located in call-chain earlier than CALLSEQ_END node, the latter becomes
a leaf and therefore a dead node (and is being removed quite fast).
Proposed here solution relies on another data-flow pseudo nodes
(ProxyReg) which purpose is only to keep CALLSEQ_END at legalisation and
instruction selection phases - we remove the pseudo instructions before
register scheduling phase.
Patch by Denys Zariaiev!
Differential Revision: https://reviews.llvm.org/D34708
llvm-svn: 350069
The change is an effort to split and refactor abandoned
D34708 into smaller parts.
Here the behaviour of unsupported instructions is changed
to match the behaviour of explicit intrinsics calls.
Currently LLVM crashes with:
> Assertion getInstruction() && "Not a call or invoke instruction!" failed.
With this patch LLVM produces a more sensible error message:
> Cannot select: ... i32 = ExternalSymbol'__foobar'
Author: Denys Zariaiev <denys.zariaiev@gmail.com>
Differential Revision: https://reviews.llvm.org/D55145
llvm-svn: 349213
If a module has function references, but no functions
themselves, we may end up never calling runOnMachineFunction
and therefore would never initialize nvptxSubtarget field
which would eventually cause a crash.
Instead of relying on nvptxSubtarget being initialized by
one of the methods, retrieve subtarget info directly.
Differential Revision: https://reviews.llvm.org/D55580
llvm-svn: 348952
This code takes a truncate, fp_to_int, or int_to_fp with a legal result type and an input type that needs to be split and enlarges the elements in the result type before doing the split. Then inserts a follow up truncate or fp_round after concatenating the two halves back together.
But if the input type of the original op is being split on its way to ultimately being scalarized we're just going to end up building a vector from scalars and then truncating or rounding it in the vector register. Seems kind of silly to enlarge the result element type of the operation only to end up with scalar code and then building a vector with large elements only to make the elements smaller again in the vector register. Seems better to just try to get away producing smaller result types in the scalarized code.
The X86 test case that changes is a pretty contrived test case that exists because of a bug we used to have in our AVG matching code. I think the code is better now, but its not realistic anyway.
llvm-svn: 347482
According to PTX ISA .volatile has the same memory synchronization
semantics as .relaxed.sys, so it can be used to implement monotonic
atomic loads and stores. This is important for OpenMP's atomic
construct where
- 'read's and 'write's are lowered to atomic loads and stores, and
- an update of float or double types are lowered into a cmpxchg loop.
(Note that PTX could do better because it has atom.add.f{32,64} but
LLVM's atomicrmw instruction only allows integer types.)
Higher levels of atomicity (like acquire and release) need additional
synchronization properties which were added with PTX ISA 6.0 / sm_70.
So using these instructions still results in an error.
Differential Revision: https://reviews.llvm.org/D50391
llvm-svn: 339316
Differential Revision: https://reviews.llvm.org/D47171
This contains the portions of that patch that could not be committed
using the git monorepo because of dos line ending problems.
llvm-svn: 336848
See https://reviews.llvm.org/D47106 for details.
Reviewed By: probinson
Differential Revision: https://reviews.llvm.org/D47171
This commit drops that patch's changes to:
llvm/test/CodeGen/NVPTX/f16x2-instructions.ll
llvm/test/CodeGen/NVPTX/param-load-store.ll
For some reason, the dos line endings there prevent me from commiting
via the monorepo. A follow-up commit (not via the monorepo) will
finish the patch.
llvm-svn: 336843
This is the FP sibling of D43141 with the corresponding IR change in rL327212.
We can't propagate undef here because if a variable operand is a NaN, these
binops must propagate NaN. Neither global nor node-level fast-math makes a
difference. If we have 'nnan', I think later folds can turn the NaN into undef.
The tests in X86/fp-undef.ll are meant to be the definitive verification for
these folds - everything reduces identically now.
The other test changes are collateral damage. They may need to be altered to
preserve their intent.
Differential Revision: https://reviews.llvm.org/D47026
llvm-svn: 332920
Const/local/shared address spaces are all < 4GB and we can always use
32-bit pointers to access them. This has substantial performance impact
on kernels that uses shared memory for intermediary results.
The feature is disabled by default.
Differential Revision: https://reviews.llvm.org/D46147
llvm-svn: 331941
In order to set breakpoints on labels and list source code around
labels, we need collect debug information for labels, i.e., label
name, the function label belong, line number in the file, and the
address label located. In order to keep these information in LLVM
IR and to allow backend to generate debug information correctly.
We create a new kind of metadata for labels, DILabel. The format
of DILabel is
!DILabel(scope: !1, name: "foo", file: !2, line: 3)
We hope to keep debug information as much as possible even the
code is optimized. So, we create a new kind of intrinsic for label
metadata to avoid the metadata is eliminated with basic block.
The intrinsic will keep existing if we keep it from optimized out.
The format of the intrinsic is
llvm.dbg.label(metadata !1)
It has only one argument, that is the DILabel metadata. The
intrinsic will follow the label immediately. Backend could get the
label metadata through the intrinsic's parameter.
We also create DIBuilder API for labels to be used by Frontend.
Frontend could use createLabel() to allocate DILabel objects, and use
insertLabel() to insert llvm.dbg.label intrinsic in LLVM IR.
Differential Revision: https://reviews.llvm.org/D45024
Patch by Hsiangkai Wang.
llvm-svn: 331841
There's no direct instruction for this, but it's trivially implemented
with two movs. Without this the code generator just dies when
encountering a shufflevector.
Differential Revision: https://reviews.llvm.org/D46116
llvm-svn: 330948
Previously HalfTy was not handled which would either trigger an assertion,
or result in array initialized with garbage.
Differential Revision: https://reviews.llvm.org/D45391
llvm-svn: 329463
v2f16 is a special case in NVPTX. v4f16 may be loaded as a pair of v2f16
and that was not previously handled correctly by tryLDGLDU()
Differential Revision: https://reviews.llvm.org/D45339
llvm-svn: 329456
This is needed for the upcoming implementation of the
new 8x32x16 and 32x8x16 variants of WMMA instructions
introduced in CUDA 9.1.
Differential Revision: https://reviews.llvm.org/D44719
llvm-svn: 328158
This way we can support address-space specific variants without explicitly
encoding the space in the name of the intrinsic. Less intrinsics to deal with ->
less boilerplate.
Added a bit of tablegen magic to match/replace an intrinsics with a pointer
argument in particular address space with the space-specific instruction
variant.
Updated tests to use non-default address spaces.
Differential Revision: https://reviews.llvm.org/D43268
llvm-svn: 328006
Masking first, prevents the extend from being combine with loads. Its also interfering with some vXi1 extraction code.
Differential Revision: https://reviews.llvm.org/D42679
llvm-svn: 326500
Summary:
After D43914, loads from global variables in addrspace(1) happen with
ld.global. But since they're constants, even better would be to use
ld.global.nc, aka ldg.
Reviewers: tra
Subscribers: jholewinski, sanjoy, hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D43915
llvm-svn: 326390
Summary:
NVPTXGenericToNVVM was using target-specific intrinsics to do address
space casts. Using the addrspacecast instruction is (a lot) simpler.
But it also has the advantage of being understandable to other passes.
In particular, InferAddrSpaces is able to understand these address space
casts and remove them in most cases.
Reviewers: tra
Subscribers: jholewinski, sanjoy, hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D43914
llvm-svn: 326389
Same for the sign extend case.
Currently we check for multiple uses on the binop. Then we call ExtendUsesToFormExtLoad to capture SetCCs that use the load. So we only end up finding any setccs when the and has additional uses and the load is used by a setcc. I don't think the and having multiple uses is relevant here. I think we should only be checking for the load having multiple uses.
This changes an NVPTX test because we now find that the load has a second use by a truncate, but ExtendUsesToFormExtLoad only looks at setccs it can extend. All other operations just check isTruncateFree. Maybe we should allow widening of an existing truncate even if its not free?
Differential Revision: https://reviews.llvm.org/D43063
llvm-svn: 325289
Yuanfang Chen