This reverts commit r227966, which turned ASAN on on AArhc64 and may be the
cause of the bots never finishing the check-all. I'll re-apply once we're
sure that bot can cope with it.
llvm-svn: 228023
This patch adds general shuffle pattern matching for the MOVQ zero-extend instruction (copy lower 64bits, zero upper) for all 128-bit integer vectors, it is added as a fallback test in lowerVectorShuffleAsZeroOrAnyExtend.
llvm-svn: 228022
Summary:
Straight-line strength reduction (SLSR) is implemented in GCC but not yet in
LLVM. It has proven to effectively simplify statements derived from an unrolled
loop, and can potentially benefit many other cases too. For example,
LLVM unrolls
#pragma unroll
foo (int i = 0; i < 3; ++i) {
sum += foo((b + i) * s);
}
into
sum += foo(b * s);
sum += foo((b + 1) * s);
sum += foo((b + 2) * s);
However, no optimizations yet reduce the internal redundancy of the three
expressions:
b * s
(b + 1) * s
(b + 2) * s
With SLSR, LLVM can optimize these three expressions into:
t1 = b * s
t2 = t1 + s
t3 = t2 + s
This commit is only an initial step towards implementing a series of such
optimizations. I will implement more (see TODO in the file commentary) in the
near future. This optimization is enabled for the NVPTX backend for now.
However, I am more than happy to push it to the standard optimization pipeline
after more thorough performance tests.
Test Plan: test/StraightLineStrengthReduce/slsr.ll
Reviewers: eliben, HaoLiu, meheff, hfinkel, jholewinski, atrick
Reviewed By: jholewinski, atrick
Subscribers: karthikthecool, jholewinski, llvm-commits
Differential Revision: http://reviews.llvm.org/D7310
llvm-svn: 228016
Appends the username to the first component (after the temp dir) of the
module cache path. If the username contains a character that shouldn't
go into a path (for now conservatively allow [a-zA-Z0-9_]), we fallback
to the user id.
llvm-svn: 228013
This patch detects consecutive vector loads using the existing
EltsFromConsecutiveLoads() logic. This fixes:
http://llvm.org/bugs/show_bug.cgi?id=22329
This patch effectively reverts the tablegen additions of D6492 /
http://reviews.llvm.org/rL224344 ...which in hindsight were a horrible hack.
The test cases that were added with that patch are simply modified to load
from varying offsets of a base pointer. These loads did not match the existing
tablegen patterns.
A happy side effect of doing this optimization earlier is that we can now fold
the load into a math op where possible; this is shown in some of the updated
checks in the test file.
Differential Revision: http://reviews.llvm.org/D7303
llvm-svn: 228006
Before this patch, the CMake build assumed LIT_EXECUTABLE pointed
to a Python script, not an executable. If you were to pass in an
executable, such as the result of py2exe on lit.py, the build would
fall over.
With this patch, the CMake build assumes LIT_EXECUTABLE is an
executable. You can continue setting it to lit.py, but it will
now use its shebang to find a Python interpreter.
Differential Revision: http://reviews.llvm.org/D7315
llvm-svn: 228005
distinction between the different use-cases. With the previous default
behavior we would occasionally emit empty debug locations in situations
where they actually were strictly required (= on invoke insns).
We now have a choice between defaulting to an empty location or an
artificial location.
Specifically, this fixes a bug caused by a missing debug location when
emitting C++ EH cleanup blocks from within an artificial function, such as
an ObjC destroy helper function.
rdar://problem/19670595
llvm-svn: 228003
lto_codegen_compile_optimized. Also add lto_api_version.
Before this commit, we can only dump the optimized bitcode after running
lto_codegen_compile, but it includes some impacts of running codegen passes,
one example is StackProtector pass. We will get assertion failure when running
llc on the optimized bitcode, because StackProtector is effectively run twice.
After splitting lto_codegen_compile, the linker can choose to dump the bitcode
before running lto_codegen_compile_optimized.
lto_api_version is added so ld64 can check for runtime-availability of the new
API.
rdar://19565500
llvm-svn: 228000
If we are building an 64bit installer on Windows we have to adjust the
Program Files path otherwise it uses the wrong Program Files (x86)
directory. Related CMake bug report
http://public.kitware.com/Bug/view.php?id=14211
Patch by Ismail Dönmez!
llvm-svn: 227999
These checks detect potential deadlocks caused by inconsistent lock
ordering. The checks are implemented under the -Wthread-safety-beta flag.
llvm-svn: 227997
Before this patch, the CMake build assumed LIT_EXECUTABLE pointed
to a Python script, not an executable. If you were to pass in an
executable, such as the result of py2exe on lit.py, the build would
fall over.
With this patch, the CMake build assumes LIT_EXECUTABLE is an
executable. You can continue setting it to lit.py, but it will
now use its shebang to find a Python interpreter.
Differential Revision: http://reviews.llvm.org/D7315
llvm-svn: 227994
This can happen when a REV instruction is commuted.
The trick is not to define the _vi versions of instructions, which has these
consequences:
- code generation will always fail if a pseudo cannot be lowered
(very useful to catch bugs where an unsupported instruction somehow makes
it to the printer)
- ability to query if a pseudo can be lowered, which is done in commuteOpcode
to prevent REV from commuting to non-REV on VI
Tested-by: Michel Dänzer <michel.daenzer@amd.com>
llvm-svn: 227990
The getCommute* functions are only used with pseudos, so this commit doesn't
change anything.
The issue with missing non-rev versions of shift instructions on VI will fixed
separately.
Tested-by: Michel Dänzer <michel.daenzer@amd.com>
llvm-svn: 227989
- V_MAC_LEGACY_F32 exists on VI, but it's VOP3-only.
- Define CVT_PK opcodes which are different between SI and VI. These are
unused. The idea is to define all chip differences.
v2: keep V_MUL_LO_U32
Tested-by: Michel Dänzer <michel.daenzer@amd.com>
llvm-svn: 227988
These are VOP2 on SI and VOP3 on VI, and their pseudos are neither, which can
be a problem. In order to make isVOP2 and isVOP3 queries behave as expected,
the encoding must be determined first.
This doesn't fix any known issue, but better safe than sorry.
v2: add and use getMCOpcodeFromPseudo
Tested-by: Michel Dänzer <michel.daenzer@amd.com>
llvm-svn: 227987
This fixes a hang when using an empty geometry shader.
v2: - don't add s_nop when followed by s_waitcnt
- comestic changes
Tested-by: Michel Dänzer <michel.daenzer@amd.com>
llvm-svn: 227986
r224330 introduced a bug by misinterpreting the "FeatureVectorUAMem" bit.
The commit log says that change did not affect anything, but that's not correct.
That change allowed SSE instructions to have unaligned mem operands folded into
math ops, and that's not allowed in the default specification for any SSE variant.
The bug is exposed when compiling for an AVX-capable CPU that had this feature
flag but without enabling AVX codegen. Another mistake in r224330 was not adding
the feature flag to all AVX CPUs; the AMD chips were excluded.
This is part of the fix for PR22371 ( http://llvm.org/bugs/show_bug.cgi?id=22371 ).
This feature bit is SSE-specific, so I've renamed it to "FeatureSSEUnalignedMem".
Changed the existing test case for the feature bit to reflect the new name and
renamed the test file itself to better reflect the feature.
Added runs to fold-vex.ll to check for the failing codegen.
Note that the feature bit is not set by default on any CPU because it may require a
configuration register setting to enable the enhanced unaligned behavior.
llvm-svn: 227983
Thou shall not jump into SEH blocks. Jumping out of SEH __try and __excepts
is A-ok. Jumping out of __finally blocks is B-ok (msvc doesn't error about it,
but warns that it has undefined behavior).
I've checked that clang's behavior with this patch matches msvc's behavior.
We don't have the warning on jumping out of a __finally yet, see the FIXME
in the test. clang also currently crashes on codegen for a jump out of a
__finally block, see PR22414 comment 7.
I also added a few tests for the interaction of indirect jumps and SEH blocks.
MSVC doesn't support indirect jumps, so there's no way to know if clang behave
the same way as msvc here. clang's behavior with this patch does make sense
to me, but maybe it could be argued that it should be more permissive (see
FIXME in the indirect jump tests -- shout if you have an opinion on this).
llvm-svn: 227982
This patch is a third attempt to properly handle the local-dynamic and
global-dynamic TLS models.
In my original implementation, calls to __tls_get_addr were hidden
from view until the asm-printer phase, at which point the underlying
branch-and-link instruction was created with proper relocations. This
mostly worked well, but I used some repellent techniques to ensure
that the TLS_GET_ADDR nodes at the SD and MI levels correctly received
input from GPR3 and produced output into GPR3. This proved to work
badly in the presence of multiple TLS variable accesses, with the
copies to and from GPR3 being scheduled incorrectly and generally
creating havoc.
In r221703, I addressed that problem by representing the calls to
__tls_get_addr as true calls during instruction lowering. This had
the advantage of removing all of the bad hacks and relying on the
existing call machinery to properly glue the copies in place. It
looked like this was going to be the right way to go.
However, as a side effect of the recent discovery of problems with
linker optimizations for TLS, we discovered cases of suboptimal code
generation with this strategy. The problem comes when tls_get_addr is
called for the same address, and there is a resulting CSE
opportunity. It turns out that in such cases MachineCSE will common
the addis/addi instructions that set up the input value to
tls_get_addr, but will not common the calls themselves. MachineCSE
does not have any machinery to common idempotent calls. This is
perfectly sensible, since presumably this would be done at the IR
level, and introducing calls in the back end isn't commonplace. In
any case, we end up with two calls to __tls_get_addr when one would
suffice, and that isn't good.
I presumed that the original design would have allowed commoning of
the machine-specific nodes that hid the __tls_get_addr calls, so as
suggested by Ulrich Weigand, I went back to that design and cleaned it
up so that the copies were properly held together by glue
nodes. However, it turned out that this didn't work either...the
presence of copies to physical registers kept the machine-specific
nodes from being commoned also.
All of which leads to the design presented here. This is a return to
the original design, except that no attempt is made to introduce
copies to and from GPR3 during instruction lowering. Virtual registers
are used until prior to register allocation. At that point, a special
pass is run that identifies the machine-specific nodes that hide the
tls_get_addr calls and introduces the copies to and from GPR3 around
them. The register allocator then coalesces these copies away. With
this design, MachineCSE succeeds in commoning tls_get_addr calls where
possible, and we get nice optimal code generation (better than GCC at
the moment, which does not common these calls).
One additional problem must be dealt with: After introducing the
mentions of the physical register GPR3, the aggressive anti-dependence
breaker sees opportunities to improve scheduling by selecting a
different register instead. Flags must be used on the instruction
descriptions to tell the anti-dependence breaker to keep its hands in
its pockets.
One thing missing from the original design was recording a definition
of the link register on the GET_TLS_ADDR nodes. Doing this was found
to be insufficient to force a stack frame to be created, which led to
looping behavior because two different LR values were stored at the
same address. This appears to have been an oversight in
PPCFrameLowering::determineFrameLayout(), which is repaired here.
Because MustSaveLR() returns true for calls to builtin_return_address,
this changed the expected behavior of
test/CodeGen/PowerPC/retaddr2.ll, which now stacks a frame but
formerly did not. I've fixed the test case to reflect this.
There are existing TLS tests to catch regressions; the checks in
test/CodeGen/PowerPC/tls-store2.ll proved to be too restrictive in the
face of instruction scheduling with these changes, so I fixed that
up.
I've added a new test case based on the PrettyStackTrace module that
demonstrated the original problem. This checks that we get correct
code generation and that CSE of the calls to __get_tls_addr has taken
place.
llvm-svn: 227976
Currently, no one owns script::Parser buffers, but yet ELFLinkingContext gets
updated with StringRef pointers to data inside Parser buffers. Since this buffer
is locally owned inside GnuLdDriver::evalLinkerScript(), as soon as this
function finishes, all pointers in ELFLinkingContext that comes from linker
scripts get invalid. The problem is that we need someone to own linker scripts
data structures and, since ELFLinkingContext transports references to linker
scripts data, we can simply make it also own all linker scripts data.
Differential Revision: http://reviews.llvm.org/D7323
llvm-svn: 227975
This test was checking for lack of a "movaps" (an aligned load)
rather than a "movups" (an unaligned load). It also included
a store which complicated the checking.
Add specific CPU runs to prevent subtarget feature flag overrides
from inhibiting this optimization.
llvm-svn: 227972
Simon Pilgrim