Summary:
At this point SANCOV_OPTIONS are not functional but it is our intent
to move here sanitizer coverage flags from various sanitizers _OPTIONS.
Reviewers: kcc
Subscribers: kubabrecka, mgorny
Differential Revision: https://reviews.llvm.org/D28311
llvm-svn: 291068
With this patch 10 out of 13 tests are passing.
Following is the list of failing tests:
struct-simple.cpp
workingset-signal-posix.cpp
mmap-shadow-conflict.c
Reviewed by bruening
Differential: D23799
llvm-svn: 280795
Summary:
Respect the handle_sigill common flag and handle_segv flags while we're
at it.
We still handle signals/exceptions differently on Unix and Windows. The
installation process is tricky on Windows, and difficult to push down
into sanitizer_common without concerning it with the different
static/dynamic CRT models on Windows.
Reviewers: kcc, etienneb
Subscribers: llvm-commits, kubabrecka
Differential Revision: https://reviews.llvm.org/D23098
llvm-svn: 277621
Summary:
Adds a version of sigaction that uses a raw system call, to avoid circular
dependencies and support calling sigaction prior to setting up
interceptors. The new sigaction relies on an assembly sigreturn routine
for its restorer, which is Linux x86_64-only for now.
Uses the new sigaction to initialize the working set tool's shadow fault
handler prior to libc interceptor being set up. This is required to
support instrumentation invoked during interceptor setup, which happens
with an instrumented tcmalloc or other allocator compiled with esan.
Adds a test that emulates an instrumented allocator.
Reviewers: aizatsky
Subscribers: vitalybuka, tberghammer, zhaoqin, danalbert, kcc, srhines, eugenis, llvm-commits, kubabrecka
Differential Revision: http://reviews.llvm.org/D21083
llvm-svn: 272676
Summary:
Adds a version of sigaction that uses a raw system call, to avoid circular
dependencies and support calling sigaction prior to setting up
interceptors. The new sigaction relies on an assembly sigreturn routine
for its restorer, which is Linux x86_64-only for now.
Uses the new sigaction to initialize the working set tool's shadow fault
handler prior to libc interceptor being set up. This is required to
support instrumentation invoked during interceptor setup, which happens
with an instrumented tcmalloc or other allocator compiled with esan.
Adds a test that emulates an instrumented allocator.
Reviewers: aizatsky
Subscribers: vitalybuka, tberghammer, zhaoqin, danalbert, kcc, srhines, eugenis, llvm-commits, kubabrecka
Differential Revision: http://reviews.llvm.org/D21083
llvm-svn: 272591
Summary:
Adds a version of sigaction that uses a raw system call, to avoid circular
dependencies and support calling sigaction prior to setting up
interceptors. The new sigaction relies on an assembly sigreturn routine
for its restorer, which is Linux x86_64-only for now.
Uses the new sigaction to initialize the working set tool's shadow fault
handler prior to libc interceptor being set up. This is required to
support instrumentation invoked during interceptor setup, which happens
with an instrumented tcmalloc or other allocator compiled with esan.
Adds a test that emulates an instrumented allocator.
Reviewers: aizatsky
Subscribers: vitalybuka, tberghammer, zhaoqin, danalbert, kcc, srhines, eugenis, llvm-commits, kubabrecka
Differential Revision: http://reviews.llvm.org/D21083
llvm-svn: 272553
Summary:
As suggested by kcc@ in http://reviews.llvm.org/D20084#441418, move the CheckFailed and Die functions, and their associated callback functionalities in their own separate file.
I expended the build rules to include a new rule that would not include those termination functions, so that another project can define their own.
The tests check-{a,t,m,ub,l,e,df}san are all passing.
Reviewers: llvm-commits, kcc
Subscribers: kubabrecka
Differential Revision: http://reviews.llvm.org/D20742
llvm-svn: 271055
This file will contain s390-specific code. For now, let's move the s390
version of internal_mmap here.
Differential Revision: http://reviews.llvm.org/D19174
llvm-svn: 266482
Summary:
First batch of sancov.py rewrite in C++.
Supports "-print" and "-covered_functions" commands.
Differential Revision: http://reviews.llvm.org/D14356
llvm-svn: 252683
Summary:
llvm-symbolizer understands both PDBs and DWARF, so it's a better bet if
it's available. It prints out the function parameter types and column
numbers, so I needed to churn the expected test output a bit.
This makes most of the llvm-symbolizer subprocessing code
target-independent. Pipes on all platforms use fd_t, and we can use the
portable ReadFromFile / WriteToFile wrappers in symbolizer_sanitizer.cc.
Only the pipe creation and process spawning is Windows-specific.
Please check that the libcdep layering is still correct. I don't know
how to reproduce the build configuration that relies on that.
Reviewers: samsonov
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D11791
llvm-svn: 244616
Previously, Android target had a logic of duplicating all sanitizer
output to logcat. This change extends it to all posix platforms via
the use of syslog, controlled by log_to_syslog flag. Enabled by
default on Android, off everywhere else.
A bit of cmake magic is required to allow Printf() to call a libc
function. I'm adding a stub implementation to support no-libc builds
like dfsan and safestack.
This is a second attempt. I believe I've fixed all the issues that
prompted the revert: Mac build, and all kinds of non-CMake builds
(there are 3 of those).
llvm-svn: 243051
Previously, Android target had a logic of duplicating all sanitizer
output to logcat. This change extends it to all posix platforms via
the use of syslog, controlled by log_to_syslog flag. Enabled by
default on Android, off everywhere else.
A bit of cmake magic is required to allow Printf() to call a libc
function. I'm adding a stub implementation to support no-libc builds
like dfsan and safestack.
llvm-svn: 242975
Summary: _Unwind_Backtrace is not available on iOS, so we should ifdef out the posix implementations of BufferedStackTrace::SlowUnwindStack and BufferedStackTrace::SlowUnwindStackWithContext on iOS.
Reviewers: samsonov
Reviewed By: samsonov
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D10696
llvm-svn: 240586
Summary:
Use CMake's cmake_parse_arguments() instead.
It's called in a slightly different way, but supports all our use cases.
It's in CMake 2.8.8, which is our minimum supported version.
CMake 3.0 doc (roughly the same. No direct link to 2.8.8 doc):
http://www.cmake.org/cmake/help/v3.0/module/CMakeParseArguments.html?highlight=cmake_parse_arguments
Since I was already changing these calls, I changed ARCH and LIB into
ARCHS and LIBS to make it more clear that they're lists of arguments.
Reviewers: eugenis, samsonov, beanz
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D10529
llvm-svn: 240120
Summary:
This change takes darwin-specific goop that was scattered around CMakeLists files and spread between add_compiler_rt_object_library and add_compiler_rt_darwin_object_library and moves it all under add_compiler_rt_object_library.
The goal of this is to try to push platform handling as low in the utility functions as possible.
Reviewers: rnk, samsonov
Reviewed By: rnk, samsonov
Subscribers: rnk, rsmith, llvm-commits
Differential Revision: http://reviews.llvm.org/D10250
llvm-svn: 239498
Get rid of "libclang_rt.san" library that used to contain
sanitizer_common pieces required by UBSan if it's used in a standalone
mode. Instead, build two variants of UBSan runtime: "ubsan" and
"ubsan_standalone" (same for "ubsan_cxx" and "ubsan_standalone_cxx").
Later "ubsan" and "ubsan_cxx" libraries will go away, as they will
embedded it into corresponding ASan runtimes.
llvm-svn: 233011
They are currently still *not* used, "llvm-symbolizer" is still the default symbolizer on OS X.
Reviewed at http://reviews.llvm.org/D6588
llvm-svn: 232026
The new parser is a lot stricter about syntax, reports unrecognized
flags, and will make it easier to implemented some of the planned features.
llvm-svn: 226169
Summary:
Introduce a single place where we specify flag type, name, default
value, and description. This removes a large amount of boilerplate
and ensures we won't leave flags uninitialized.
Test Plan: regression test suite
Reviewers: kcc
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D6851
llvm-svn: 225239
Summary:
This commit introduces function __sanitizer::RenderFrame()
that allows to render the contents of AddressInfo (essentially, symbolized stack frame)
using the custom format string. This function can be used to
implement stack frame formatting for both ThreadSanitizer and
generic StackTrace::Print(), used in another places. This paves the
way towards allowing user to control the format of stack frames,
obtaining them in any format he desires, and/or enforcing the consistent
output from all sanitizers.
Test Plan: compiler-rt test suite
Reviewers: kcc
Reviewed By: kcc
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D6140
llvm-svn: 221409
* Detect Android toolchain target arch and set correct runtime library name.
* Merged a lot of Android and non-Android code paths.
* Android is only supported in standalone build of compiler-rt now.
* Linking lsan-common in ASan-Android (makes lsan annotations work).
* Relying on -fsanitize=address linker flag when building tests (again,
unification with non-Android path).
* Runtime library moved from lib/asan to lib/linux.
llvm-svn: 218605
Mike Aizatsky