The lldb-server unit tests don't test the right thing when the debug
server in use is copied from somewhere else. This can lead to spurious
test failures.
Disable these unit tests when an external debug server is in use.
Fixes llvm.org/PR36494.
llvm-svn: 326001
Summary:
Consolidate LLDB_CODESIGN_IDENTITY logic in one place and use
SKIP_DEBUGSERVER, which can be set independently, to control
codesigning targets.
Currently, running cmake the first time in a clean directory, without
passing -DLLDB_CODESIGN_IDENTITY='', fails. However, subsequent runs
succeed. That's because LLDB_CODESIGN_IDENTITY gets added to the
CACHE after the initial test. To fix that, the default value must be
set before it's tested.
Here's the error produced on the first run:
CMake Error at tools/lldb/tools/debugserver/source/CMakeLists.txt:215 (add_custom_command):
No TARGET 'debugserver' has been created in this directory.
Differential Revision: https://reviews.llvm.org/D43432
llvm-svn: 325442
Remove obsolete measurements.
This check in requires at least 10.11
Reviewed: Jason Molenda, Jim Ingham
<rdar://problem/37047106> Xcode Memory gauge should show the jetsam ledger footprint rather than anonymous
llvm-svn: 324013
been specified yet (either by the user, or by one of the lldb
extensions like qHostInfo or qProcessInfo), and the target.xml
includes a <architecture> tag specifying x86_64, set the architecture
appropriately.
I'm not sure what we can expect to see in the <architecture> tag, so
I'm only doing this for x86_64 right now where I've seen "i386:x86_64"
used. I've seen a target.xml from a jtag board that sends just "arm"
because it doesn't know more specifically what type of board it is
connected to...
<rdar://problem/29908970>
llvm-svn: 322339
(built with Xcode) from 10.9 to 10.11. It also enables the use of
libcompression in debugserver by default (these API are only present
in macOS 10.11 and newer -- 10.11 was released c. Sep 2015).
I don't know if we have people / bots building lldb on older mac
releases; if this turns out to be a problem I will revert the change.
There are some parts of lldb (e.g. debugserer's ability to report
the OS version #) that only work with 10.10 and this changes the
behavior of lldb (whether the older or newer dyld interfaces are
used) so there is some importance to updating the min required
version.
llvm-svn: 322128
Summary:
Make sure we propagate environment when starting debugserver with a pre-loaded
inferior. AFAIK, RNBRunLoopLaunchInferior is only called in pre-loaded inferior
scenario, so we can just pick up the debugserver environment instead of trying
to construct an envp from the (empty) context.
This makes debugserver pass an test added for an equivalent lldb-server fix.
Reviewers: jasonmolenda, clayborg
Subscribers: JDevlieghere, lldb-commits
Differential Revision: https://reviews.llvm.org/D41352
llvm-svn: 321355
Fix alignment UB in some Mach exception-handling logic.
This lets us build lldb and debugserver with UBSan in trapping mode, and
get further along in the testing process before a trap is encountered.
rdar://35923991
llvm-svn: 320127
Null-checking functions which aren't marked weak_import is a no-op
(the compiler rewrites the check to 'true'), regardless of whether a
library providing its definition is weak-linked. If the deployment
target is greater than the minimum requirement, the availability markup
on APIs does not lower to weak_import.
Remove no-op null checks to clean up the code and silence warnings.
Differential Revision: https://reviews.llvm.org/D40812
llvm-svn: 319936
Turns out WITH_LOCKDOWN define changes the struct layout and constructor implementation for RNBSocket which is used in debugserver.cpp, so we need to make sure this is consistent.
In the future we should change WITH_LOCKDOWN to be configured in a generated header, but for now we can just set it correctly.
<rdar://problem/33900552>
llvm-svn: 312666
to match the changes Saleem Abdulrasool committed in r311579. Fixes
a testsuite failure now that the testsuite expects a 16 bit return
value for thsi reg.
llvm-svn: 311627
When building for iOS we build two variants of debugserver. One which supports UI functionality like Springboard for launching applications, and one which does not.
This patch adds support for building debugserver with and without UI support libraries being available.
llvm-svn: 309026
This refactoring changes two significant things about how the debugserver build system works:
(1) debugserver will include all appropriate architecture support, so we can now build arm or ppc debugservers
(2) debugserver can be built by itself, so you don't have to configure all of LLDB in order to generate debugserver.
llvm-svn: 308377
While adding IPv6 support to debugserver I broke handling wildcard addresses and fully qualified address filtering. This patch resolves that bug and adds a test for matching the address "*".
<rdar://problem/32947613>
llvm-svn: 307957
This renames the LLDB error class to Status, as discussed
on the lldb-dev mailing list.
A change of this magnitude cannot easily be done without
find and replace, but that has potential to catch unwanted
occurrences of common strings such as "Error". Every effort
was made to find all the obvious things such as the word "Error"
appearing in a string, etc, but it's possible there are still
some lingering occurences left around. Hopefully nothing too
serious.
llvm-svn: 302872
This support was landed in r300579, and reverted in r300669 due to failures on the bots.
The failures were caused by sockets not being properly closed, and this updated version of the patches should resolve that.
Summary from the original change:
This patch adds IPv6 support to LLDB/Host's TCP socket implementation. Supporting IPv6 involved a few significant changes to the implementation of the socket layers, and I have performed some significant code cleanup along the way.
This patch changes the Socket constructors for all types of sockets to not create sockets until first use. This is required for IPv6 support because the socket type will vary based on the address you are connecting to. This also has the benefit of removing code that could have errors from the Socket subclass constructors (which seems like a win to me).
The patch also slightly changes the API and behaviors of the Listen/Accept pattern. Previously both Listen and Accept calls took an address specified as a string. Now only listen does. This change was made because the Listen call can result in opening more than one socket. In order to support listening for both IPv4 and IPv6 connections we need to open one AF_INET socket and one AF_INET6 socket. During the listen call we construct a map of file descriptors to addrin structures which represent the allowable incoming connection address. This map removes the need for taking an address into the Accept call.
This does have a change in functionality. Previously you could Listen for connections based on one address, and Accept connections from a different address. This is no longer supported. I could not find anywhere in LLDB where we actually used the APIs in that way. The new API does still support AnyAddr for allowing incoming connections from any address.
The Listen implementation is implemented using kqueue on FreeBSD and Darwin, WSAPoll on Windows and poll(2) everywhere else.
https://reviews.llvm.org/D31823
llvm-svn: 301492
The break the linux bots (and probably any other machine which would
run the test suite in a massively parallel way). The problem is that it
can happen that we only successfully create an IPv6 listening socket
(because the relevant IPv4 port is used by another process) and then the
connecting side attempts to connect to the IPv4 port and fails.
It's not very obvious how to fix this problem, so I am reverting this
until we come up with a solution.
llvm-svn: 300669
Summary: This patch adds IPv6 support to debugserver. It follows a similar pattern to the changes proposed for LLDB/Host except that the listen implementation is only with kqueue(2) because debugserver is only supported on Darwin.
Reviewers: jingham, jasonmolenda, clayborg
Reviewed By: clayborg
Subscribers: mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D31824
llvm-svn: 300580
Summary:
This patch refactors the CMake build system's support for building debugserver to allow us to build the majority of debugserver's sources into the debugserverCommon library which can then be reused by unit tests.
The first unit test I've written tests debug server's ability to accept incoming connections from LLDB. The test forks the process, and one side creates a listening socket using debugserver's socket API, the other side creates a transmitting socket using LLDB's TCPSocket class.
I have no clue where to even start getting this connected into the LLDB Xcode project, so for now these tests are CMake-only.
Reviewers: zturner, labath, jasonmolenda
Subscribers: lldb-commits, mgorny
Differential Revision: https://reviews.llvm.org/D31357
llvm-svn: 300111
This patch modifies the Get/Set Register Value/Context functions for Intel to not duplicate code for reading non-AVX registers. This is similar to other transformations I've been making to the AVX register handling code.
llvm-svn: 297787
Jason Molenda