Add the missing domain equivalences for movss, movsd, movd and movq zero extending loading instructions.
Differential Revision: https://reviews.llvm.org/D27684
llvm-svn: 289825
Initial support for target shuffle constant folding in cases where all shuffle inputs are constant. We may be able to relax this and merge shuffles with only some constant inputs in the future.
I've added the helper function getTargetConstantBitsFromNode (based off a similar function in X86ShuffleDecodeConstantPool.cpp) that could be reused for other cases requiring constant vector extraction.
Differential Revision: https://reviews.llvm.org/D27220
llvm-svn: 288250
Under normal circumstances we prefer the higher performance MOVD to extract the 0'th element of a v8i16 vector instead of PEXTRW.
But as detailed on PR27265, this prevents the SSE41 implementation of PEXTRW from folding the store of the 0'th element. Additionally it prevents us from making use of the fact that the (SSE2) reg-reg version of PEXTRW implicitly zero-extends the i16 element to the i32/i64 destination register.
This patch only preferentially lowers to MOVD if we will not be zero-extending the extracted i16, nor prevent a store from being folded (on SSSE41).
Fix for PR27265.
Differential Revision: https://reviews.llvm.org/D22509
llvm-svn: 276289
Improve computeZeroableShuffleElements to be able to peek through bitcasts to extract zero/undef values from BUILD_VECTOR nodes of different element sizes to the shuffle mask.
Differential Revision: http://reviews.llvm.org/D14261
llvm-svn: 263906
The XformToShuffleWithZero method currently checks AND masks at the per-lane level for all-one and all-zero constants and attempts to convert them to legal shuffle clear masks.
This patch generalises XformToShuffleWithZero, splitting and checking the sub-lanes of the constants down to the byte level to see if any legal shuffle clear masks are possible. This allows a lot of masks (often from legalization or truncation) to be folded into existing shuffle patterns and removes a lot of constant mask loading.
There are a few examples of poor shuffle lowering that are exposed by this patch that will be cleaned up in future patches (e.g. merging shuffles that are separated by bitcasts, x86 legalized v8i8 zero extension uses PMOVZX+AND+AND instead of AND+PMOVZX, etc.)
Differential Revision: http://reviews.llvm.org/D11518
llvm-svn: 243831
While the v4i32 shl operation is already vectorized using a cvttps2dq/pmulld pattern, the lshr/ashr opeations are still scalarized.
This patch adds vectorization support for non-uniform v4i32 shift operations - it splats constant shift amounts to allow them to use the immediate sse shift instructions, or extracts/zero-extends non-constant shift amounts. The individual results are then blended together.
Differential Revision: http://reviews.llvm.org/D11063
llvm-svn: 241989
Essentially the same as the GEP change in r230786.
A similar migration script can be used to update test cases, though a few more
test case improvements/changes were required this time around: (r229269-r229278)
import fileinput
import sys
import re
pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)")
for line in sys.stdin:
sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line))
Reviewers: rafael, dexonsmith, grosser
Differential Revision: http://reviews.llvm.org/D7649
llvm-svn: 230794
Handle the poor codegen for i64/x86xmm->v2i64 (%mm -> %xmm) moves. Instead of
using stack store/load pair to do the job, use scalar_to_vector directly, which
in the MMX case can use movq2dq. This was the current behavior prior to
improvements for vector legalization of extloads in r213897.
This commit fixes the regression and as a side-effect also remove some
unnecessary shuffles.
In the new attached testcase, we go from:
pshufw $-18, (%rdi), %mm0
movq %mm0, -8(%rsp)
movq -8(%rsp), %xmm0
pshufd $-44, %xmm0, %xmm0
movd %xmm0, %eax
...
To:
pshufw $-18, (%rdi), %mm0
movq2dq %mm0, %xmm0
movd %xmm0, %eax
...
Differential Revision: http://reviews.llvm.org/D7126
rdar://problem/19413324
llvm-svn: 226953
Now that we can fully specify extload legality, we can declare them
legal for the PMOVSX/PMOVZX instructions. This for instance enables
a DAGCombine to fire on code such as
(and (<zextload-equivalent> ...), <redundant mask>)
to turn it into:
(zextload ...)
as seen in the testcase changes.
There is one regression, in widen_load-2.ll: we're no longer able
to do store-to-load forwarding with illegal extload memory types.
This will be addressed separately.
Differential Revision: http://reviews.llvm.org/D6533
llvm-svn: 226676
which have successfully round-tripped through the combine phase, and use
this to ensure all operands to DAG nodes are visited by the combiner,
even if they are only added during the combine phase.
This is critical to have the combiner reach nodes that are *introduced*
during combining. Previously these would sometimes be visited and
sometimes not be visited based on whether they happened to end up on the
worklist or not. Now we always run them through the combiner.
This fixes quite a few bad codegen test cases lurking in the suite while
also being more principled. Among these, the TLS codegeneration is
particularly exciting for programs that have this in the critical path
like TSan-instrumented binaries (although I think they engineer to use
a different TLS that is faster anyways).
I've tried to check for compile-time regressions here by running llc
over a merged (but not LTO-ed) clang bitcode file and observed at most
a 3% slowdown in llc. Given that this is essentially a worst case (none
of opt or clang are running at this phase) I think this is tolerable.
The actual LTO case should be even less costly, and the cost in normal
compilation should be negligible.
With this combining logic, it is possible to re-legalize as we combine
which is necessary to implement PSHUFB formation on x86 as
a post-legalize DAG combine (my ultimate goal).
Differential Revision: http://reviews.llvm.org/D4638
llvm-svn: 213898
vector operation legalization with support for custom target lowering
and fallback to expand when it fails, and use this to implement sext and
anyext load lowering for x86 in a more principled way.
Previously, the x86 backend relied on a target DAG combine to "combine
away" sextload and extload nodes prior to legalization, or would expand
them during legalization with terrible code. This is particularly
problematic because the DAG combine relies on running over non-canonical
DAG nodes at just the right time to match several common and important
patterns. It used a combine rather than lowering because we didn't have
good lowering support, and to expose some tricks being employed to more
combine phases.
With this change it becomes a proper lowering operation, the backend
marks that it can lower these nodes, and I've added support for handling
the canonical forms that don't have direct legal representations such as
sextload of a v4i8 -> v4i64 on AVX1. With this change, our test cases
for this behavior continue to pass even after the DAG combiner beigns
running more systematically over every node.
There is some noise caused by this in the test suite where we actually
use vector extends instead of subregister extraction. This doesn't
really seem like the right thing to do, but is unlikely to be a critical
regression. We do regress in one case where by lowering to the
target-specific patterns early we were able to combine away extraneous
legal math nodes. However, this regression is completely addressed by
switching to a widening based legalization which is what I'm working
toward anyways, so I've just switched the test to that mode.
Differential Revision: http://reviews.llvm.org/D4654
llvm-svn: 213897
instruction sequences with CHECK-NEXT for these test cases.
This notably exposes how absolutely horrible the generated code is for
several of these test cases, and will make any future updates to the
test as our vector instruction selection gets better.
llvm-svn: 213732
Generalize the AArch64 .td nodes for AssertZext and AssertSext. Use
them to match the relevant pextr store instructions.
The test widen_load-2.ll requires a slight change because with the
stores gone, the remaining instructions are scheduled in a different
order.
Add test cases for SSE4 and AVX variants.
Resolves rdar://13414672.
Patch by Adam Nemet <anemet@apple.com>.
llvm-svn: 200957
- split WidenVecRes_Binary into WidenVecRes_Binary and WidenVecRes_BinaryCanTrap
- WidenVecRes_BinaryCanTrap preserves the original behaviour for operations
that can trap
- WidenVecRes_Binary simply widens the operation and improves codegen for
3-element vectors by allowing widening and promotion on x86 (matches the
behaviour of unary and ternary operation widening)
- use WidenVecRes_Binary for operations on integers.
Reviewed by: nrotem
llvm-svn: 188699
This update was done with the following bash script:
find test/CodeGen -name "*.ll" | \
while read NAME; do
echo "$NAME"
if ! grep -q "^; *RUN: *llc.*debug" $NAME; then
TEMP=`mktemp -t temp`
cp $NAME $TEMP
sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \
while read FUNC; do
sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP
done
sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP
sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP
sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP
sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP
mv $TEMP $NAME
fi
done
llvm-svn: 186280
Adds an instruction itinerary to all x86 instructions, giving each a default latency of 1, using the InstrItinClass IIC_DEFAULT.
Sets specific latencies for Atom for the instructions in files X86InstrCMovSetCC.td, X86InstrArithmetic.td, X86InstrControl.td, and X86InstrShiftRotate.td. The Atom latencies for the remainder of the x86 instructions will be set in subsequent patches.
Adds a test to verify that the scheduler is working.
Also changes the scheduling preference to "Hybrid" for i386 Atom, while leaving x86_64 as ILP.
Patch by Preston Gurd!
llvm-svn: 149558
Simon Pilgrim