A previous commit made libLLVMDebugInfoDWARF depend on the LLVM_Bitcode module which depends on the LLVM_intrinsic_gen module which depends on "llvm/IR/Attributes.inc" which is a generated header not depended on by libLLVMDebugInfo. Add that dependency.
llvm-svn: 374827
A common pattern in Windows is to have all your precompiled headers
use an object named stdafx.obj. If you've got a project with many
different static libs, you might use a separate PCH for each one of
these.
During the final link step, a file from A might reference the PCH
object from A, but it will have the same name (stdafx.obj) as any
other PCH from another project. The only difference will be the
path. For example, A might be A/stdafx.obj while B is B/stdafx.obj.
The existing algorithm checks only the filename that was passed on
the command line (or stored in archive), but this is insufficient in
the case where relative paths are used, because depending on the
command line object file / library order, it might find the wrong
PCH object first resulting in a signature mismatch.
The fix here is to simply check whether the absolute path of the
PCH object (which is stored in the input obj file for the file that
references the PCH) *ends with* the full relative path of whatever
is specified on the command line (or is in the archive).
Differential Revision: https://reviews.llvm.org/D66431
llvm-svn: 374442
This patch adds the ability to create GSYM files with GsymCreator, and read them with GsymReader. Full testing has been added for both new classes.
This patch differs from the original patch https://reviews.llvm.org/D53379 in that is uses a StringTableBuilder class from llvm instead of a custom version. Support for big and little endian files has been added. If the endianness matches the current host, we use efficient extraction for the header, address table and address info offset tables.
Differential Revision: https://reviews.llvm.org/D68744
llvm-svn: 374381
(specifying an underlying type for the enum might also be suitable - but
this seems better/as good, since there's a clear expectation this can
contain values other than the actual enumerators of this enum)
llvm-svn: 374196
David added the JamCRC implementation in r246590. More recently, Eugene
added a CRC-32 implementation in r357901, which falls back to zlib's
crc32 function if present.
These checksums are essentially the same, so having multiple
implementations seems unnecessary. This replaces the CRC-32
implementation with the simpler one from JamCRC, and implements the
JamCRC interface in terms of CRC-32 since this means it can use zlib's
implementation when available, saving a few bytes and potentially making
it faster.
JamCRC took an ArrayRef<char> argument, and CRC-32 took a StringRef.
This patch changes it to ArrayRef<uint8_t> which I think is the best
choice, and simplifies a few of the callers nicely.
Differential revision: https://reviews.llvm.org/D68570
llvm-svn: 374148
Summary:
The functions different in two ways:
- getLLVMRegNum could return both "eh" and "other" dwarf register
numbers, while getLLVMRegNumFromEH only returned the "eh" number.
- getLLVMRegNum asserted if the register was not found, while the second
function returned -1.
The second distinction was pretty important, but it was very hard to
infer that from the function name. Aditionally, for the use case of
dumping dwarf expressions, we needed a function which can work with both
kinds of number, but does not assert.
This patch solves both of these issues by merging the two functions into
one, returning an Optional<unsigned> value. While the same thing could
be achieved by adding an "IsEH" argument to the (renamed)
getLLVMRegNumFromEH function, it seemed better to avoid the confusion of
two functions and put the choice of asserting into the hands of the
caller -- if he checks the Optional value, he can safely process
"untrusted" input, and if he blindly dereferences the Optional, he gets
the assertion.
I've updated all call sites to the new API, choosing between the two
options according to the function they were calling originally, except
that I've updated the usage in DWARFExpression.cpp to use the "safe"
method instead, and added a test case which would have previously
triggered an assertion failure when processing (incorrect?) dwarf
expressions.
Reviewers: dsanders, arsenm, JDevlieghere
Subscribers: wdng, aprantl, javed.absar, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67154
llvm-svn: 372710
Make the method MachOUniversalBinary::getObjectForArch return MachOUniversalBinary::ObjectForArch
and add helper methods MachOUniversalBinary::getMachOObjectForArch, MachOUniversalBinary::getArchiveForArch
for those who explicitly expect to get a MachOObjectFile or an Archive.
Differential revision: https://reviews.llvm.org/D67700
Test plan: make check-all
llvm-svn: 372278
This patch adds the llvm::gsym::Header class which appears at the start of a stand alone GSYM file, or in the first bytes of the GSYM data in a GSYM section within a file. Added encode and decode methods with full error handling and full tests.
Differential Revision: https://reviews.llvm.org/D67666
llvm-svn: 372149
This patch adds encoding and decoding of the FunctionInfo objects along with full error handling and tests. Full details of the FunctionInfo encoding format appear in the FunctionInfo.h header file.
Differential Revision: https://reviews.llvm.org/D67506
llvm-svn: 372135
The static analyzer is warning about a potential null dereference - but as we're in DataMemberLayoutItem we should be able to guarantee that the Symbol is a PDBSymbolData type, allowing us to use cast<PDBSymbolData> - and if not assert will fire for us.
llvm-svn: 371933
This patch adds the ability to create a gsym::LineTable object, populate it, encode and decode it and test all functionality.
The full format of the LineTable encoding is specified in the header file LineTable.h.
Differential Revision: https://reviews.llvm.org/D66602
llvm-svn: 371657
As DW_AT_rnglists_base points after the header and headers have
different sizes for DWARF32 and DWARF64, we have to use the format
of the CU to adjust the offset correctly in order to extract
the referenced range list table.
The patch also changes the type of RangeSectionBase because in DWARF64
it is 8-bytes long.
Differential Revision: https://reviews.llvm.org/D67098
llvm-svn: 371016
This patch adds the ability to encode and decode InlineInfo objects and adds test coverage. Error handling is introduced in the encoding and decoding which will be used from here on out for remaining patches.
Differential Revision: https://reviews.llvm.org/D66600
llvm-svn: 370936
Summary:
While fixing the handling of some error cases, r370363 introduced new
problems -- assertion failures due to unchecked errors (my excuse is that a very
early version of that patch used Optional<T> instead of Expected).
This patch adds proper handling of parsing errors encountered when
dumping location lists from inside DWARF DIEs, and adds a bunch of
additional tests.
I reorder the arguments of the location list dumping functions to make
them consistent, and also be able to dump the two kinds of location
lists generically.
Reviewers: JDevlieghere, dblaikie, probinson
Subscribers: aprantl, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67102
llvm-svn: 370868
Verify that the call site DWARF symbols (added during the implementation
of the debug entry values feature) are generated properly.
Differential Revision: https://reviews.llvm.org/D66865
llvm-svn: 370631
Summary:
While examining this class for possible use in lldb, I noticed two
things:
- it spits out parsing errors directly to stderr
- the loclists parser can incorrectly return valid location lists when
parsing malformed (truncated) data
I improve the stderr situation by making the parseOneLocationList
functions return Expected<T>s. The errors are still dumped to stderr by
their callers, so this is only a partial fix, but it is enough for my
use case, as I intend to parse the locations lists one by one.
I fix the behavior in the truncated scenario by using the newly
introduced DataExtractor Cursor API.
I also add tests for handling the error cases, as they currently have no
coverage.
Reviewers: dblaikie, JDevlieghere, probinson
Subscribers: lldb-commits, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63591
llvm-svn: 370363
Summary:
This is motivated by D63591, where we realized that there isn't a really
good way of telling whether a DataExtractor is reading actual data, or
is it just returning default values because it reached the end of the
buffer.
This patch resolves that by providing a new "Cursor" class. A Cursor
object encapsulates two things:
- the current position/offset in the DataExtractor
- an error object
Storing the error object inside the Cursor enables one to use the same
pattern as the std::{io}stream API, where one can blindly perform a
sequence of reads and only check for errors once at the end of the
operation. Similarly to the stream API, as soon as we encounter one
error, all of the subsequent operations are skipped (return default
values) too, even if the would suceed with clear error state. Unlike the
std::stream API (but in line with other llvm APIs), we force the error
state to be checked through usage of llvm::Error.
Reviewers: probinson, dblaikie, JDevlieghere, aprantl, echristo
Subscribers: kristina, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63713
llvm-svn: 370042
The full GSYM patch started with: https://reviews.llvm.org/D53379
This patch add the ability to encode data using the new llvm::gsym::FileWriter class.
FileWriter is a simplified binary data writer class that doesn't require targets, target definitions, architectures, or require any other optional compile time libraries to be enabled via the build process. This class needs the ability to seek to different spots in the binary data that it produces to fix up offsets and sizes in GSYM data. It currently uses std::ostream over llvm::raw_ostream because llvm::raw_ostream doesn't support seeking which is required when encoding and decoding GSYM data.
AddressRange objects are encoded and decoded to be relative to a base address. This will be the FunctionInfo's start address if the AddressRange is directly contained in a FunctionInfo, or a base address of the containing parent AddressRange or AddressRanges. This allows address ranges to be efficiently encoded using ULEB128 encodings as we encode the offset and size of each range instead of full addresses. This also makes encoded addresses easy to relocate as we just need to relocate one base address.
Differential Revision: https://reviews.llvm.org/D63828
llvm-svn: 369587
DWARFUnitHeader::getLength() returns uint64_t.
DWARFUnit::getLength() should do the same.
Differential Revision: https://reviews.llvm.org/D66472
llvm-svn: 369529
The type_offset field is 8 bytes long in DWARF64. The patch extends
TypeOffset to uint64_t and fixes its reading. The patch also fixes
checking of TypeOffset bounds as it was inaccurate in DWARF64 case.
Differential Revision: https://reviews.llvm.org/D66465
llvm-svn: 369378
In r368879 I made an attempt to guess the path style from the files in
the line table. After some consideration I now think this is a poor
idea. This patch undoes that behavior and instead adds an optional
argument to specify the path style. This allows us to make that decision
elsewhere where we have more information. In case of LLDB based on the
Unit.
llvm-svn: 369072
Now that we've moved to C++14, we no longer need the llvm::make_unique
implementation from STLExtras.h. This patch is a mechanical replacement
of (hopefully) all the llvm::make_unique instances across the monorepo.
llvm-svn: 369013
After switching over LLDB's line table parser to libDebugInfo, we
noticed two regressions on the Windows bot. The problem is that when
obtaining a file from the line table prologue, we append paths without
specifying a path style. This leads to incorrect results on Windows for
debug info containing Posix paths:
0x0000000000201000: /tmp\b.c, is_start_of_statement = TRUE
This patch is an attempt to fix that by guessing the path style whenever
possible.
Differential revision: https://reviews.llvm.org/D66227
llvm-svn: 368879
Changes: no changes. A fix for the clang code will be landed right on top.
Original commit message:
SectionRef::getName() returns std::error_code now.
Returning Expected<> instead has multiple benefits.
For example, it forces user to check the error returned.
Also Expected<> may keep a valuable string error message,
what is more useful than having a error code.
(Object\invalid.test was updated to show the new messages printed.)
This patch makes a change for all users to switch to Expected<> version.
Note: in a few places the error returned was ignored before my changes.
In such places I left them ignored. My intention was to convert the interface
used, and not to improve and/or the existent users in this patch.
(Though I think this is good idea for a follow-ups to revisit such places
and either remove consumeError calls or comment each of them to clarify why
it is OK to have them).
Differential revision: https://reviews.llvm.org/D66089
llvm-svn: 368826
SectionRef::getName() returns std::error_code now.
Returning Expected<> instead has multiple benefits.
For example, it forces user to check the error returned.
Also Expected<> may keep a valuable string error message,
what is more useful than having a error code.
(Object\invalid.test was updated to show the new messages printed.)
This patch makes a change for all users to switch to Expected<> version.
Note: in a few places the error returned was ignored before my changes.
In such places I left them ignored. My intention was to convert the interface
used, and not to improve and/or the existent users in this patch.
(Though I think this is good idea for a follow-ups to revisit such places
and either remove consumeError calls or comment each of them to clarify why
it is OK to have them).
Differential revision: https://reviews.llvm.org/D66089
llvm-svn: 368812
This isn't the most robust error handling API, but does allow clients to
opt-in to getting Errors they can handle. I suspect the long-term
solution would be to move away from the lazy unit parsing and have an
explicit step that parses the unit and then allows access to the other
APIs that require a parsed unit.
llvm-dwarfdump could be expanded to use this (or newer/better API) to
demonstrate the benefit of it - but for now lld will use this in a
follow-up cl which ensures lld can exit non-zero on errors like this (&
provide more descriptive diagnostics including which object file the
error came from).
(error access to later errors when parsing nested DIEs would be good too
- but, again, exposing that without it being a hassle for every consumer
may be tricky)
llvm-svn: 368377
Some of these names were abbreviated, some were not, some pluralised,
some not. Made the API difficult to use - since it's an exact 1:1
mapping to the DWARF sections - use those names (changing underscore
separation for camel casing).
llvm-svn: 368189
This updates all libraries and tools in LLVM Core to use 64-bit offsets
which directly or indirectly come to DataExtractor.
Differential Revision: https://reviews.llvm.org/D65638
llvm-svn: 368014
Using 64-bit offsets is required to fully implement 64-bit DWARF.
As these classes are used in many different libraries they should
temporarily support both 32- and 64-bit offsets.
Differential Revision: https://reviews.llvm.org/D64006
llvm-svn: 368013
Fixes e.g.
http://lab.llvm.org:8011/builders/sanitizer-x86_64-linux-bootstrap-ubsan/builds/14273
We can't left shift here because left shifting of a negative number is UB.
The same doesn't apply to unsigned arithmetic, but switching to unsigned
doesn't appear to stop ubsan from complaining, so we need to mask out the
high bits.
llvm-svn: 367959
Any addresses that we pass to llvm-symbolizer are going to be untagged,
while any HWASAN instrumented globals are going to be tagged in the
symbol table. Therefore we need to untag the addresses before using them.
Differential Revision: https://reviews.llvm.org/D65769
llvm-svn: 367926
This patch exnteds the error handling in the debug line parser to get
rid of the existing MD5 assertion. I want to reuse the debug line parser
from LLVM in LLDB where we cannot crash on invalid input.
Differential revision: https://reviews.llvm.org/D64544
llvm-svn: 366762
It is necessary to generate fixups in .debug_frame or .eh_frame as
relaxation is enabled due to the address delta may be changed after
relaxation.
There is an opcode with 6-bits data in debug frame encoding. So, we
also need 6-bits fixup types.
Differential Revision: https://reviews.llvm.org/D58335
llvm-svn: 366524
It is necessary to generate fixups in .debug_frame or .eh_frame as
relaxation is enabled due to the address delta may be changed after
relaxation.
There is an opcode with 6-bits data in debug frame encoding. So, we
also need 6-bits fixup types.
Differential Revision: https://reviews.llvm.org/D58335
llvm-svn: 366442
When code relaxation is enabled many RISC-V fixups are not resolved but
instead relocations are emitted. This happens even for DWARF debug
sections. Therefore, to properly support the parsing of DWARF debug info
we need to be able to resolve RISC-V relocations. This patch adds:
* Support for RISC-V relocations in RelocationResolver
* DWARF support for two relocations per object file offset
* DWARF changes to support relocations in more DIE fields
The two relocations per offset change is needed because some RISC-V
relocations (used for label differences) come in pairs.
Relocations can also be emitted for DWARF fields where relocations were
not yet evaluated. Adding relocation support for some of these fields is
essencial. On the other hand, LLVM currently emits RISC-V relocations
for fixups that could be safely evaluated, since they can never be
affected by code relaxations. This patch also adds relocation support
for the fields affected by those extraneous relocations (the DWARF unit
entry Length, and the DWARF debug line entry TotalLength and
PrologueLength), for testing purposes.
Differential Revision: https://reviews.llvm.org/D62062
Patch by Luís Marques.
llvm-svn: 366402
- getCompression() used to return a PDB_SourceCompression even though
the docs for IDiaInjectedSource are explicit about the return value
being compiler-dependent. Return an uint32_t instead, and make the
printing code handle unknown values better by printing "Unknown" and
the int value instead of not printing any compression.
- Print compressed contents as hex dump, not as string.
- Add compression type "DotNet", which is used (at least) by csc.exe,
the C# compiler. Also add a lengthy comment describing the stream
contents (derived from looking at the raw hex contents long enough
to see the GUIDs, which led me to the roslyn and mono implementations
for handling this).
- The native injected source dumper was dumping the contents of the
whole data stream -- but csc.exe writes a stream that's padded with
zero bytes to the next 512 boundary, and the dia api doesn't display
those padding bytes. So make NativeInjectedSource::getCode() do the
same thing.
Differential Revision: https://reviews.llvm.org/D64879
llvm-svn: 366386
`pretty -native -injected-sources -injected-source-content` works with
this patch, and produces identical output to the dia version.
Differential Revision: https://reviews.llvm.org/D64428
llvm-svn: 366236
The DWARF3 documentation had inconsistency concerning the reserved range
for unit length values. The issue was fixed in DWARF4.
Differential Revision: https://reviews.llvm.org/D64622
llvm-svn: 366190
The first argument in the constructor was ignored, and the remaining
arguments were always passed as their defaults.
Differential Revision: https://reviews.llvm.org/D64407
llvm-svn: 366188
In LLDB, when parsing type units, we don't need to parse the whole line
table. Instead, we only need to parse the "support files" from the line
table prologue.
To make that possible, this patch moves the respective functions from
the LineTable into the Prologue. Because I don't think users of the
LineTable should have to know that these files come from the Prologue,
I've left the original methods in place, and made them redirect to the
LineTable.
Differential revision: https://reviews.llvm.org/D64774
llvm-svn: 366164
In LLDB, when parsing type units, we don't need to parse the whole line
table. Instead, we only need to parse the "support files" from the line
table prologue.
To make that possible, this patch moves the respective functions from
the LineTable into the Prologue. Because I don't think users of the
LineTable should have to know that these files come from the Prologue,
I've left the original methods in place, and made them redirect to the
LineTable.
Differential revision: https://reviews.llvm.org/D64774
llvm-svn: 366158
The construction was explained in
https://reviews.llvm.org/D44810?id=139526#inline-391999 but reading the code
shouldn't require hunting down old reviews to understand it.
The precomputed list was missing an entry for the empty list case, and
one entry at the very end. (The current last entry is the last one where
3 * BucketCount fits in a signed int, but the reference implementation
uses unsigneds as far as I can tell, so there's room for one more entry.)
No behavior change for inputs seen in practice.
Differential Revision: https://reviews.llvm.org/D64738
llvm-svn: 366107
The traits object is only used by a few methods. Deserializing a hash
table and walking it is possible without the traits object, so it
shouldn't be required to build a dummy object for that use case.
The TraitsT object used to be a function template parameter before
r327647, this restores it to that state.
This makes it clear that the traits object isn't needed at all in 1 of
the current 3 uses of HashTable (and I am going to add another use that
doesn't need it), and that the default PdbHashTraits isn't used outside
of tests.
While here, also re-enable 3 checks in the test that were commented out
(which requires making HashTableInternals templated and giving FooBar
an operator==).
No intended behavior change.
Differential Revision: https://reviews.llvm.org/D64640
llvm-svn: 365974
All callers had a PDBFile object at hand, so call
Pdb.createIndexedStream() instead, which pre-populates all the arguments
(and returns nullptr for kInvalidStreamIndex).
Also change safelyCreateIndexedStream() to only take the string index,
and update callers. Make the method public and call it in two places
that manually did the bounds checking before.
No intended behavior change.
Differential Revision: https://reviews.llvm.org/D64633
llvm-svn: 365936
Dump the DWARF information about call sites and call site parameters into
debug info sections.
The patch also provides an interface for the interpretation of instructions
that could load values of a call site parameters in order to generate DWARF
about the call site parameters.
([13/13] Introduce the debug entry values.)
Co-authored-by: Ananth Sowda <asowda@cisco.com>
Co-authored-by: Nikola Prica <nikola.prica@rt-rk.com>
Co-authored-by: Ivan Baev <ibaev@cisco.com>
Differential Revision: https://reviews.llvm.org/D60716
llvm-svn: 365467
Currently, the symbolizer lib can only symbolize a file on disk.
This patch teaches the symbolizer lib to symbolize objects.
llvm-objdump needs this to support archive disassembly with source info.
https://bugs.llvm.org/show_bug.cgi?id=41871
Reviewed by: jhenderson, grimar, MaskRay
Differential Revision: https://reviews.llvm.org/D63521
llvm-svn: 365376
This patch removes the part which tried to interpret addresses
in that section as offsets and simplifies the remaining code.
Differential Revision: https://reviews.llvm.org/D64020
llvm-svn: 364896
Delete unnecessary getters of AddressRange.
Simplify AddressRange::size(): Start <= End check should be checked in an upper layer.
Delete isContiguousWith() that doesn't make sense.
Simplify AddressRanges::insert. Delete commented code. Fix it when more than 1 ranges are to be deleted.
Delete trailing newline.
llvm-svn: 364637
Add the IR and the AsmPrinter parts for handling of the DW_OP_entry_values
DWARF operation.
([11/13] Introduce the debug entry values.)
Co-authored-by: Ananth Sowda <asowda@cisco.com>
Co-authored-by: Nikola Prica <nikola.prica@rt-rk.com>
Co-authored-by: Ivan Baev <ibaev@cisco.com>
Differential Revision: https://reviews.llvm.org/D60866
llvm-svn: 364542
The full GSYM patch started with: https://reviews.llvm.org/D53379
In that patch we wanted to split up getting GSYM into the LLVM code base so we are not committing too much code at once.
This is a first in a series of patches where I only add the foundation classes along with complete unit tests. They provide the foundation for encoding and decoding a GSYM file.
File entries are defined in llvm::gsym::FileEntry. This class splits the file up into a directory and filename represented by uniqued string table offsets. This allows all files that are referred to in a GSYM file to be encoded as 1 based indexes into a global file table in the GSYM file.
Function information in stored in llvm::gsym::FunctionInfo. This object represents a contiguous address range that has a name and range with an optional line table and inline call stack information.
Line table entries are defined in llvm::gsym::LineEntry. They store only address, file and line information to keep the line tables simple and allows the information to be efficiently encoded in a subsequent patch.
Inline information is defined in llvm::gsym::InlineInfo. These structs store the name of the inline function, along with one or more address ranges, and the file and line that called this function. They also contain any child inline information.
There are also utility classes for address ranges in llvm::gsym::AddressRange, and string table support in llvm::gsym::StringTable which are simple classes.
The unit tests test all the APIs on these simple classes so they will be ready for the next patches where we will create GSYM files and parse GSYM files.
Differential Revision: https://reviews.llvm.org/D63104
llvm-svn: 364427
This command prints a description of the referenced function's stack frame.
For each formal parameter and local variable, the tool prints:
- function name
- variable name
- file/line of declaration
- FP-relative variable location (if available)
- size in bytes
- HWASAN tag offset
This information will be used by the HWASAN runtime to identify local
variables in UAR reports.
Differential Revision: https://reviews.llvm.org/D63468
llvm-svn: 364225
The test only checks the existence of the `Types CU list` line.
Unfortunately I can't make a better test because
{gcc,clang} -fuse-ld={lld,gold} --gdb-index do not give me a non-empty types CU list.
Reviewed By: ikudrin
Differential Revision: https://reviews.llvm.org/D63537
llvm-svn: 363800
The only caller of SymbolizableObjectFile::create passes a non-null
DebugInfoContext and asserts that they do so. Move the assert into
SymbolizableObjectFile::create and remove null checks.
Differential Revision: https://reviews.llvm.org/D63298
llvm-svn: 363334
Summary: Deduplicate S_CONSTANTS when linking, if they have the same value.
Reviewers: rnk
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63151
llvm-svn: 363089
This makes the interface simpler and more consistent with the interface for
.dSYM files and fixes a bug where llvm-symbolizer would not read the dwp if
it was asked to symbolize data before symbolizing code.
Differential Revision: https://reviews.llvm.org/D63114
llvm-svn: 363025
This allows the DWARFExpression class to handle addresses without
crashing on targets with 16-bit pointers like AVR.
This is required in order to generate assembly from clang via the '-S'
flag.
This fixes an error with the following message:
clang: llvm/include/llvm/DebugInfo/DWARF/DWARFExpression.h:132: llvm::DWARFExpression::DWARFExpression(llvm::DataExtractor, uint16_t, uint8_t):
Assertion `AddressSize == 8 || AddressSize == 4' failed.
llvm-svn: 362290
CodeView has its own register map which is defined in cvconst.h. Missing this
mapping before saving register to CodeView causes debugger to show incorrect
value for all register based variables, like variables in register and local
variables addressed by register (stack pointer + offset).
This change added mapping between LLVM register and CodeView register so the
correct register number will be stored to CodeView/PDB, it aso fixed the
mapping from CodeView register number to register name based on current
CPUType but print PDB to yaml still assumes X86 CPU and needs to be fixed.
Differential Revision: https://reviews.llvm.org/D62608
llvm-svn: 362280
This lead to errors when dumping binaries with v4 and v5 units linked
together (but could've also errored on v5 units that did/didn't use
str_offsets).
Also improves error handling and messages around invalid str_offsets
contributions.
llvm-svn: 361683
This adds `-parent-recurse-depth` which limits the number of parent DIEs
being dumped.
Differential revision: https://reviews.llvm.org/D62359
llvm-svn: 361671
This test case was incorrect because it mixed DWARF32 and DWARF64 for a
single unit (DWARF32 unit referencing a DWARF64 str_offsets section). So
fix enough of the unit parsing for DWARF64 and make the test valid.
(not sure if anyone needs DWARF64 support though - support in
libDebugInfoDWARF has been added piecemeal and LLVM doesn't produce it
at all)
llvm-svn: 361582
Summary:
This was flagged in https://www.viva64.com/en/b/0629/ under "Snippet No.
15" (see under #13). It looks like PVS studio flags nullptr checks where
the ptr is used inbetween creation and checking against nullptr.
Reviewers: JDevlieghere, probinson
Reviewed By: JDevlieghere
Subscribers: RKSimon, hiraditya, llvm-commits, srhines
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62118
llvm-svn: 361176
r360876 didn't fix 2 call sites in clang.
Expected<ArrayRef<uint8_t>> may be better but use Expected<StringRef> for now.
Follow-up of D61781.
llvm-svn: 360892
It broke the Clang build, see llvm-commits thread.
> Expected<ArrayRef<uint8_t>> may be better but use Expected<StringRef> for now.
>
> Follow-up of D61781.
llvm-svn: 360878
Follow up to r359122, after a bug was reported in it - the original
change too aggressively tried to move related types out of type units,
which included unnamed types (like array types) which can't reasonably
be declared-but-not-defined.
A step beyond that is that some types in type units can be anonymous, if
they are types with a name for linkage purposes (eg: "typedef struct { }
x;"). So ensure those don't get turned into plain declarations (without
signatures) because, lacking names, they can't be resolved to the
definition.
[Also include a fix for llvm-dwarfdump/libDebugInfoDWARF to pretty print
types in type units]
llvm-svn: 360458
Summary:
Prior to DWARF v5, a directory index of 0 represents DW_AT_comp_dir.
In DWARF v5, the index starts with 0 and Entry.DirIdx is the index into
Prologue.IncludeDirectories.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D61253
llvm-svn: 360015
lld-link used to write PDB files that DIA couldn't recover natvis
files from if:
- The global strings table was > 64kiB
- There were at least 3 natvis files
The cause was that the hash function for the /src/headerblock stream
was incorrect: It needs to be truncated to 16 bit.
If the global strings table was <= 64kiB, truncating to 16 bit is a
no-op, so this wasn't needed for small programs.
If there are only 1 or 2 natvis files, then the growth strategy in
HashTable::grow() would mean the hash table would have 2 buckets (for 1
natvis file) or 4 buckets (for 4 natvis files), and since the hash
function is used modulo number of buckets, and since 2 and 4 divide
0x10000, the missing `% 0x10000` is a no-op there too. For 3 natvis
files, the hash table grows to 6 buckets, which has a factor that's not
common with 0x10000 and the difference starts to matter.
Fixes PR41626.
Differential Revision: https://reviews.llvm.org/D61277
llvm-svn: 359515
This is very minor issue. The returned section index is only used by
DWARFDebugLine as an llvm::upper_bound input and the use case shouldn't
cause any behavioral change.
llvm-svn: 358814
Another attempt to land the changes in debug line header to prevent duplicate
files in Dwarf 5. I rolled back my previous commit because of a mistake in
generating the object file in a test. Meanwhile, I addressed some offline
comments and changed the implementation; the largest difference is that
MCDwarfLineTableHeader does not keep DwarfVersion but gets it as a parameter. I
also merged the patch to fix two lld tests that will strt to fail into this
patch.
Original Commit:
https://reviews.llvm.org/D59515
Original Message:
Motivation: In previous dwarf versions, file name indexes started from 1, and
the primary source file was not explicit. Dwarf 5 standard (6.2.4) prescribes
the primary source file to be explicitly given an entry with an index number 0.
The current implementation honors the specification by just duplicating the
main source file, once with index number 0, and later maybe with another
index number. While this is compliant with the letter of the standard, the
duplication causes problems for consumers of this information such as lldb.
(Some files are duplicated, where only some of them have a line table although
all refer to the same file)
With this change, dwarf 5 debug line section files always start from 0, and
the zeroth entry is not duplicated whenever possible. This requires different
handling of dwarf 4 and dwarf 5 during generation (e.g. when a function returns
an index zero for a file name, it signals an error in dwarf 4, but not in dwarf
5) However, I think the minor complication is worth it, because it enables all
consumers (lldb, gdb, dwarfdump, objdump, and so on) to treat all files in the
file name list homogenously.
llvm-svn: 358732
It didn't handle empty LHS correctly. If two ranges of LHS were
contiguous and jointly contained one range of RHS, it could also be incorrect.
DWARFAddressRange::contains can be removed and its tests can be merged into DWARFVerifier::DieRangeInfo::contains
llvm-svn: 358387
Summary:
Make DW_LNS_copy set the discriminator register to 0, to conform to
DWARF 4 & 5: "Then it sets the discriminator register to 0, and sets the
basic_block, prologue_end and epilogue_begin registers to false."
Because all of DW_LNE_end_sequence, DN_LNS_copy, and special opcodes reset
discriminator to 0, we can move discriminator=0 to appendRowToMatrix.
Also, make DW_LNS_copy print before appending the row, as it is similar
to a address+=0,line+=0 special opcode, which prints before appending
the row.
Reviewers: dblaikie, probinson, aprantl
Reviewed By: dblaikie
Subscribers: danielcdh, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60364
llvm-svn: 358148
We want the last row whose address is less than or equal to Address.
This can be computed as upper_bound - 1, which is simpler than
lower_bound followed by skipping equal rows in a loop.
Since FirstRow (LowPC) does not satisfy the predicate (OrderByAddress)
while LastRow-1 (HighPC) satisfies the predicate. We can decrease the
search range by two, i.e.
upper_bound [FirstRow,LastRow) = upper_bound [FirstRow+1,LastRow-1)
llvm-svn: 358053
In a sorted list of non-overlapping [LowPC,HighPC) ranges, locating an address with
upper_bound on HighPC is simpler than lower_bound on LowPC.
llvm-svn: 358012
The current lower_bound approach has to check two iterators pos and pos-1.
Changing it to upper_bound allows us to check one iterator (similar to
DWARFUnitVector::getUnitFor*).
llvm-svn: 357834
In general, llvm-symbolizer follows the output style of GNU's addr2line.
However, there are still some differences; in particular, for a requested
address, llvm-symbolizer prints line and column, while addr2line prints
only the line number.
This patch adds a new switch to select the preferred style.
Differential Revision: https://reviews.llvm.org/D60190
llvm-svn: 357675
Summary:
Now CVType and CVSymbol are effectively type-safe wrappers around
ArrayRef<uint8_t>. Make the kind() accessor load it from the
RecordPrefix, which is the same for types and symbols.
Reviewers: zturner, aganea
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60018
llvm-svn: 357658
The standard doesn't require a DW_TAG_variable, DW_TAG_formal_parameter
or DW_TAG_constant to A DW_AT_type attribute describing the type of the
variable. It only specifies that it *can* have one.
llvm-svn: 357628
This avoids allocating a few KB of heap memory on startup, and instead
allocates these maps lazily. I noticed this while profiling LLD.
llvm-svn: 357192
This reverts commit rL357020.
The commit broke the test llvm/test/tools/llvm-objdump/embedded-source.test
on some builds including clang-ppc64be-linux-multistage,
clang-s390x-linux, clang-with-lto-ubuntu, clang-x64-windows-msvc,
llvm-clang-lld-x86_64-scei-ps4-windows10pro-fast (and others).
llvm-svn: 357026
Reapply rL356941 after regenerating the object file in the failing test
llvm/test/tools/llvm-objdump/embedded-source.test from source.
Original commit message:
[llvm] Prevent duplicate files in debug line header in dwarf 5.
Motivation: In previous dwarf versions, file name indexes started from 1, and
the primary source file was not explicit. Dwarf 5 standard (6.2.4) prescribes
the primary source file to be explicitly given an entry with an index number 0.
The current implementation honors the specification by just duplicating the
main source file, once with index number 0, and later maybe with another
index number. While this is compliant with the letter of the standard, the
duplication causes problems for consumers of this information such as lldb.
(Some files are duplicated, where only some of them have a line table although
all refer to the same file)
With this change, dwarf 5 debug line section files always start from 0, and
the zeroth entry is not duplicated whenever possible. This requires different
handling of dwarf 4 and dwarf 5 during generation (e.g. when a function returns
an index zero for a file name, it signals an error in dwarf 4, but not in dwarf 5)
However, I think the minor complication is worth it, because it enables all
consumers (lldb, gdb, dwarfdump, objdump, and so on) to treat all files in the
file name list homogenously.
Tags: #llvm, #debug-info
Differential Revision: https://reviews.llvm.org/D59515
llvm-svn: 357018
Summary:
Motivation: In previous dwarf versions, file name indexes started from 1, and
the primary source file was not explicit. Dwarf 5 standard (6.2.4) prescribes
the primary source file to be explicitly given an entry with an index number 0.
The current implementation honors the specification by just duplicating the
main source file, once with index number 0, and later maybe with another
index number. While this is compliant with the letter of the standard, the
duplication causes problems for consumers of this information such as lldb.
(Some files are duplicated, where only some of them have a line table although
all refer to the same file)
With this change, dwarf 5 debug line section files always start from 0, and
the zeroth entry is not duplicated whenever possible. This requires different
handling of dwarf 4 and dwarf 5 during generation (e.g. when a function returns
an index zero for a file name, it signals an error in dwarf 4, but not in dwarf 5)
However, I think the minor complication is worth it, because it enables all
consumers (lldb, gdb, dwarfdump, objdump, and so on) to treat all files in the
file name list homogenously.
Reviewers: dblaikie, probinson, aprantl, espindola
Reviewed By: probinson
Subscribers: emaste, jvesely, nhaehnle, aprantl, javed.absar, arichardson, hiraditya, MaskRay, rupprecht, jdoerfert, llvm-commits
Tags: #llvm, #debug-info
Differential Revision: https://reviews.llvm.org/D59515
llvm-svn: 356941
[Symbolizer] Add getModuleSectionIndexForAddress() helper routine
The https://reviews.llvm.org/D58194 patch changed symbolizer interface.
Particularily it requires not only Address but SectionIndex also.
Note object::SectionedAddress parameter:
Expected<DILineInfo> symbolizeCode(const std::string &ModuleName,
object::SectionedAddress ModuleOffset,
StringRef DWPName = "");
There are callers of symbolizer which do not know particular section index.
That patch creates getModuleSectionIndexForAddress() routine which
will detect section index for the specified address. Thus if caller
set ModuleOffset.SectionIndex into object::SectionedAddress::UndefSection
state then symbolizer would detect section index using
getModuleSectionIndexForAddress routine.
Differential Revision: https://reviews.llvm.org/D58848
llvm-svn: 356829
Summary:
getRelocatedValue may compute incorrect value for SHT_RELA-typed relocation entries.
// DWARFDataExtractor.cpp
uint64_t DWARFDataExtractor::getRelocatedValue(uint32_t Size, uint32_t *Off,
...
// This formula is correct for REL, but may be incorrect for RELA if the value
// stored in the location (getUnsigned(Off, Size)) is not zero.
return getUnsigned(Off, Size) + Rel->Value;
In this patch, we
* refactor these visit* functions to include a new parameter `uint64_t A`.
Since these visit* functions are no longer used as visitors, rename them to resolve*.
+ REL: A is used as the addend. A is the value stored in the location where the
relocation applies: getUnsigned(Off, Size)
+ RELA: The addend encoded in RelocationRef is used, e.g. getELFAddend(R)
* and add another set of supports* functions to check if a given relocation type is handled.
DWARFObjInMemory uses them to fail early.
Reviewers: echristo, dblaikie
Reviewed By: echristo
Subscribers: mgorny, aprantl, aheejin, fedor.sergeev, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D57939
llvm-svn: 356729
Summary:
This considers module symbol streams and the global symbol stream to be
roots. Most types that this considers "unreferenced" are referenced by
LF_UDT_MOD_SRC_LINE id records, which VC seems to always include.
Essentially, they are types that the user can only find in the debugger
if they call them by name, they cannot be found by traversing a symbol.
In practice, around 80% of type information in a PDB is referenced by a
symbol. That seems like a reasonable number.
I don't really plan to do anything with this tool. It mostly just exists
for informational purposes, and to confirm that we probably don't need
to implement type reference tracking in LLD. We can continue to merge
all types as we do today without wasting space.
Reviewers: zturner, aganea
Subscribers: mgorny, hiraditya, arphaman, jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59620
llvm-svn: 356692
Introduce a DW_OP_LLVM_convert Dwarf expression pseudo op that allows
for a convenient way to perform type conversions on the Dwarf expression
stack. As an additional bonus it paves the way for using other Dwarf
v5 ops that need to reference a base_type.
The new DW_OP_LLVM_convert is used from lib/Transforms/Utils/Local.cpp
to perform sext/zext on debug values but mainly the patch is about
preparing terrain for adding other Dwarf v5 ops that need to reference a
base_type.
For Dwarf v5 the op maps to DW_OP_convert and for earlier versions a
complex shift & mask pattern is generated to emulate sext/zext.
This is a recommit of r356442 with trivial fixes for the failing tests.
Differential Revision: https://reviews.llvm.org/D56587
llvm-svn: 356451
Introduce a DW_OP_LLVM_convert Dwarf expression pseudo op that allows
for a convenient way to perform type conversions on the Dwarf expression
stack. As an additional bonus it paves the way for using other Dwarf
v5 ops that need to reference a base_type.
The new DW_OP_LLVM_convert is used from lib/Transforms/Utils/Local.cpp
to perform sext/zext on debug values but mainly the patch is about
preparing terrain for adding other Dwarf v5 ops that need to reference a
base_type.
For Dwarf v5 the op maps to DW_OP_convert and for earlier versions a
complex shift & mask pattern is generated to emulate sext/zext.
Differential Revision: https://reviews.llvm.org/D56587
llvm-svn: 356442
Before, empty debug streams were written as 8 bytes (4 bytes signature + 4 bytes for the GlobalRefs count).
With this patch, unused empty streams aren't emitted anymore. Modules now encode 65535 as an 'unused stream' value, by convention.
Also fix the * Linker * contrib section which wasn't correctly emitted previously.
Differential Revision: https://reviews.llvm.org/D59502
llvm-svn: 356395
Summary:
This is similar to how addr2line handles consecutive entries with the
same address - pick the last one.
Reviewers: dblaikie, friss, JDevlieghere
Reviewed By: dblaikie
Subscribers: eugenis, vitalybuka, echristo, JDevlieghere, probinson, aprantl, hiraditya, rupprecht, jdoerfert, llvm-commits
Tags: #llvm, #debug-info
Differential Revision: https://reviews.llvm.org/D58952
llvm-svn: 356265
Summary:
This is similar to how addr2line handles consecutive entries with the
same address - pick the last one.
Reviewers: dblaikie, friss, JDevlieghere
Reviewed By: dblaikie
Subscribers: ormris, echristo, JDevlieghere, probinson, aprantl, hiraditya, rupprecht, jdoerfert, llvm-commits
Tags: #llvm, #debug-info
Differential Revision: https://reviews.llvm.org/D58952
llvm-svn: 355972
Summary:
Swift now generates PDBs for debugging on Windows. llvm and lldb
need a language enumerator value too properly handle the output
emitted by swiftc.
Subscribers: jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59231
llvm-svn: 355882
Change the format type of *Personality and *LSDAAddress to PRIx64 since
they are of type uint64_t.
The problem was detected on mips builds, where it was printing junk values
and causing test failure.
Patch by Milos Stojanovic.
Differential Revision: https://reviews.llvm.org/D58451
llvm-svn: 355607
When dumping ToT clan's debug info with dwarfdump, we were seeing an
error saying that that the location list overflows the debug_loc
section. After reducing the testcase we figured out that we were
interpreting the DW_FORM_data4 as a section offset.
In DWARF3 DW_FORM_data4 and DW_FORM_data8 served also as a section
offset. Until now we didn't check check for the DWARF version, because
some producers (read old versions of clang) were still emitting this.
The relevant code/comment was added in 2013, and I believe it's now
reasonable to start checking the version.
The FormValue class is a little bit of a mess because it cashes the
DWARF unit and context when it extracted the value itself. Several
methods of the class rely on it being present, or return an Optional for
the code path that needs it. At the same time the FormValue class also
used in places where there's no DWARF unit.
For this patch I went with the least invasive change: checking the
version from the CU when it's available. If it's not (because the form
value was created from a value directly) we default to the old behavior.
Differential revision: https://reviews.llvm.org/D58698
llvm-svn: 355456
Add support for cloning DWARF expressions that contain base type DIE
references in dsymutil.
<rdar://problem/48167812>
Differential Revision: https://reviews.llvm.org/D58534
llvm-svn: 355148
That patch is the fix for https://bugs.llvm.org/show_bug.cgi?id=40703
"wrong line number info for obj file compiled with -ffunction-sections"
bug. The problem happened with only .o files. If object file contains
several .text sections then line number information showed incorrectly.
The reason for this is that DwarfLineTable could not detect section which
corresponds to specified address(because address is the local to the
section). And as the result it could not select proper sequence in the
line table. The fix is to pass SectionIndex with the address. So that it
would be possible to differentiate addresses from various sections. With
this fix llvm-objdump shows correct line numbers for disassembled code.
Differential review: https://reviews.llvm.org/D58194
llvm-svn: 354972
DWARFFormValues can be created from a data extractor or by passing its
value directly. Until now this was done by member functions that
modified an existing object's internal state. This patch replaces a
subset of these methods with static method that return a new
DWARFFormValue.
llvm-svn: 354941
Adds llvm-dwarfdump support for pretty printing Dwarf5 expressions ops
that reference a base type (right now only DW_OP_convert is added).
Includes verification to verify that the ops operand is actually a
DW_TAG_base_type DIE.
Differential Revision: https://reviews.llvm.org/D58442
llvm-svn: 354552
Summary:
llvm-symbolizer would originally report symbols that belonged to an invalid object file section.
Specifically the case where: `*Symbol.getSection() == ObjFile.section_end()`
This patch prevents the Symbolizer from collecting symbols that belong to invalid sections.
The test (from PR40591) introduces a case where two symbols have address 0,
one symbol is defined, 'foo', and the other is not defined, 'bar'. This patch will cause
the Symbolizer to keep 'foo' and ignore 'bar'.
As a side note, the logic for adding symbols to the Symbolizer's store
(`SymbolizableObjectFile::addSymbol`) replaces symbols with the
same <address, size> pair. At some point that logic should be revisited as in the
aforementioned case, 'bar' was overwriting 'foo' in the Symbolizer's store,
and 'foo' was forgotten.
This fixes PR40591
Reviewers: jhenderson, rupprecht
Reviewed By: rupprecht
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D58146
llvm-svn: 354083
Summary:
rL189250 added a realpath call, and rL352916 because realpath breaks assumptions with some build systems. However, the /usr/lib/debug case has been clarified, falling back to /usr/lib/debug is currently broken if the obj passed in is a relative path. Adding a call to use absolute paths when falling back to /usr/lib/debug fixes that while still not making any realpath assumptions.
This also adds a --fallback-debug-path command line flag for testing (since we probably can't write to /usr/lib/debug from buildbot environments), but was also verified manually:
```
$ rm -f path/to/dwarfdump-test.elf-x86-64
$ strace llvm-symbolizer --obj=relative/path/to/dwarfdump-test.elf-x86-64.debuglink 0x40113f |& grep dwarfdump
```
Lookups went to relative/path/to/dwarfdump-test.elf-x86-64, relative/path/to/.debug/dwarfdump-test.elf-x86-64, and then finally /usr/lib/debug/absolute/path/to/dwarfdump-test.elf-x86-64.
Reviewers: dblaikie, samsonov
Reviewed By: dblaikie
Subscribers: krytarowski, aprantl, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D57916
llvm-svn: 353730
When type streams with forward references were merged using GHashes, cycles
were introduced in the debug info. This was caused by
GlobalTypeTableBuilder::insertRecordAs() not inserting the record on the second
pass, thus yielding an empty ArrayRef at that record slot. Later on, upon PDB
emission, TpiStreamBuilder::commit() would skip that empty record, thus
offseting all indices that came after in the stream.
This solution comes in two steps:
1. Fix the hash calculation, by doing a multiple-step resolution, iff there are
forward references in the input stream.
2. Fix merge by resolving with multiple passes, therefore moving records with
forward references at the end of the stream.
This patch also adds support for llvm-readoj --codeview-ghash.
Finally, fix dumpCodeViewMergedTypes() which previously could reference deleted
memory.
Fixes PR40221
Differential Revision: https://reviews.llvm.org/D57790
llvm-svn: 353412
The wrong variable was being used when printing the address increment in
verbose output of .debug_line. This patch fixes this.
Reviewed by: JDevlieghere
Differential Revision: https://reviews.llvm.org/D57693
llvm-svn: 353288
Summary:
Using realpath makes assumptions about build systems that do not always hold true. The debug binary referred to from the .gnu_debuglink should exist in the same directory (or in a .debug directory, etc.), but the files may only exist as symlinks to a differently named files elsewhere, and using realpath causes that lookup to fail.
This was added in r189250, and this is basically a revert + regression test case.
Reviewers: dblaikie, samsonov, jhenderson
Reviewed By: dblaikie
Subscribers: llvm-commits, hiraditya
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D57609
llvm-svn: 352916
Summary:
This patch fixes access to fpo streams in native pdb from DbiStream and makes
code consistent with DbiStreamBuilder.
Patch By: leonid.mashinskiy
Reviewers: zturner, aleksandr.urakov
Reviewed By: zturner
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D56725
llvm-svn: 352615
PDBs contain several serialized hash tables. In the microsoft-pdb
repo published to support LLVM implementing PDB support, the
provided initializes the bucket count for the TPI and IPI streams
to the maximum size. This occurs in tpi.cpp L33 and tpi.cpp L398.
In the LLVM code for generating PDBs, these streams are created with
minimum number of buckets. This difference makes LLVM generated
PDBs slower for when used for debugging.
Patch by C.J. Hebert
Differential Revision: https://reviews.llvm.org/D56942
llvm-svn: 352117
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
This is difficult/not possible to test in LLVM, but is visible as a
crash in LLD when parsing DWARF to generate gdb-index.
This function is called by llvm-dwarfdump when parsing high_pc for
non-verbose output (to print the actual high_pc rather than the low_pc
relative value), but in that case llvm-dwarfdump doesn't print section
names (if it did, it would hit this problem).
We could add some other features to llvm-dwarfdump to expose this, but
nothing really springs to my mind. I will add a test to lld, though.
llvm-svn: 350010
Currently the section name (& possibly number) is only printed on
addresses in ranges - but no reason it couldn't also be displayed on
other addresses (like low/high PC).
Refactor in that direction by pulling out the section lookup and name
ambiguity dumping logic into a reusable helper.
llvm-svn: 349995
Propagate the llvm::Error a little further up. This is NFC for
llvm-dwarfdump in this change, but allows ld.lld to emit more precise
error messages about which object and archive the erroneous DWARF is in.
llvm-svn: 349978
Originally committed in r349333, reverted in r349353.
GCC emitted these unconditionally on/before 4.4/March 2012
Clang emitted these unconditionally on/before 3.5/March 2014
This improves performance when parsing CUs (especially those using split
DWARF) that contain no code ranges (such as the mini CUs that may be
created by ThinLTO importing - though generally they should be/are
avoided, especially for Split DWARF because it produces a lot of very
small CUs, which don't scale well in a bunch of other ways too
(including size)).
The revert was due to a (Google internal) test that had some checked in old
object files missing DW_AT_ranges. That's since been fixed.
llvm-svn: 349968
- When signing return addresses with -msign-return-address=<scope>{+<key>},
either the A key instructions or the B key instructions can be used. To
correctly authenticate the return address, the unwinder/debugger must know
which key was used to sign the return address.
- When and exception is thrown or a break point reached, it may be necessary to
unwind the stack. To accomplish this, the unwinder/debugger must be able to
first authenticate an the return address if it has been signed.
- To enable this, the augmentation string of CIEs has been extended to allow
inclusion of a 'B' character. Functions that are signed using the B key
variant of the instructions should have and FDE whose associated CIE has a 'B'
in the augmentation string.
- One must also be able to preserve these semantics when first stepping from a
high level language into assembly and then, as a second step, into an object
file. To achieve this, I have introduced a new assembly directive
'.cfi_b_key_frame ', that tells the assembler the current frame uses return
address signing with the B key.
- This ensures that the FDE is associated with a CIE that has 'B' in the
augmentation string.
Differential Revision: https://reviews.llvm.org/D51798
llvm-svn: 349895
This is to address post-commit feedback from Paul Robinson on r348954.
The original commit misinterprets count and upper bound as the same thing (I thought I saw GCC producing an upper bound the same as Clang's count, but GCC correctly produces an upper bound that's one less than the count (in C, that is, where arrays are zero indexed)).
I want to preserve the C-like output for the common case, so in the absence of a lower bound the count (or one greater than the upper bound) is rendered between []. In the trickier cases, where a lower bound is specified, a half-open range is used (eg: lower bound 1, count 2 would be "[1, 3)" and an unknown parts use a '?' (eg: "[1, ?)" or "[?, 7)" or "[?, ? + 3)").
Reviewers: aprantl, probinson, JDevlieghere
Differential Revision: https://reviews.llvm.org/D55721
llvm-svn: 349670
- Reapply changes intially introduced in r343089
- The archtecture info is no longer loaded whenever a DWARFContext is created
- The runtimes libraries (santiziers) make use of the dwarf context classes but
do not intialise the target info
- The architecture of the object can be obtained without loading the target info
- Adding a method to the dwarf context to get this information and multiplex the
string printing later on
Differential Revision: https://reviews.llvm.org/D55774
llvm-svn: 349472
GCC emitted these unconditionally on/before 4.4/March 2012
Clang emitted these unconditionally on/before 3.5/March 2014
This improves performance when parsing CUs (especially those using split
DWARF) that contain no code ranges (such as the mini CUs that may be
created by ThinLTO importing - though generally they should be/are
avoided, especially for Split DWARF because it produces a lot of very
small CUs, which don't scale well in a bunch of other ways too
(including size)).
llvm-svn: 349333
Doesn't handle varargs and other fun things, but it's a start. (also
doesn't print these strictly as valid C++ when it's a pointer to
function, it'll print as "void(int)*" instead of "void (*)(int)")
llvm-svn: 348965
This lays the foundation for dumping types not referenced by DW_AT_type
attributes (in the near-term, that'll be DW_AT_containing_type for a
DW_TAG_ptr_to_member_type - in the future, potentially dumping the
pretty printed name next to the DW_TAG for the type, rather than only
when the type is referenced from elsewhere)
llvm-svn: 348961
Previously we would create an lldb::Function object for each function
parsed, but we would not add these to the clang AST. This is a first
step towards getting local variable support working, as we first need an
AST decl so that when we create local variable entries, they have the
proper DeclContext.
Differential Revision: https://reviews.llvm.org/D55384
llvm-svn: 348631
VarStreamArray was built on the assumption that it is backed by a
StreamRef, and offset 0 of that StreamRef is the first byte of the first
record in the array.
This is a logical and intuitive assumption, but unfortunately we have
use cases where it doesn't hold. Specifically, a PDB module's symbol
stream is prefixed by 4 bytes containing a magic value, and the first
byte of record data in the array is actually at offset 4 of this byte
sequence.
Previously, we would just truncate the first 4 bytes and then construct
the VarStreamArray with the resulting StreamRef, so that offset 0 of the
underlying stream did correspond to the first byte of the first record,
but this is problematic, because symbol records reference other symbol
records by the absolute offset including that initial magic 4 bytes. So
if another record wants to refer to the first record in the array, it
would say "the record at offset 4".
This led to extremely confusing hacks and semantics in loading code, and
after spending 30 minutes trying to get some math right and failing, I
decided to fix this in the underlying implementation of VarStreamArray.
Now, we can say that a stream is skewed by a particular amount. This
way, when we access a record by absolute offset, we can use the same
values that the records themselves contain, instead of having to do
fixups.
Differential Revision: https://reviews.llvm.org/D55344
llvm-svn: 348499
Previously these were dropped. We now understand them sufficiently
well to start emitting them. From the debugger's perspective, this
now enables us to have debug info about typedefs (both global and
function-locally scoped)
Differential Revision: https://reviews.llvm.org/D55228
llvm-svn: 348306
Part of the patch to not build the hash map eagerly was omitted
due to a merge conflict. Add it back, which should fix the failing
tests.
llvm-svn: 348166
When there is no .debug_addr section for some reason,
llvm-dwarfdump would print the bogus empty section name when dumping ranges
in .debug_info:
DW_AT_ranges [DW_FORM_rnglistx] (indexed (0x0) rangelist = 0x00000004
[0x0000000000000000, 0x0000000000000001) ""
[0x0000000000000000, 0x0000000000000002) "")
That happens because of the code which uses 0 (zero) as a section index as a default value.
The code should use -1ULL instead because technically 0 is a valid zero section index
in ELF and -1ULL is a special constant used that means "no section available".
This is mostly a fix for the overall correctness/safety of the code,
but a test case is provided too.
Differential revision: https://reviews.llvm.org/D55113
llvm-svn: 348115
Summary:
This speeds up linking clang.exe/pdb with /DEBUG:GHASH by 31%, from
12.9s to 9.8s.
Symbol records are typically small (16.7 bytes on average), but we
processed them one at a time. CVSymbol is a relatively "large" type. It
wraps an ArrayRef<uint8_t> with a kind an optional 32-bit hash, which we
don't need. Before this change, each DbiModuleDescriptorBuilder would
maintain an array of CVSymbols, and would write them individually with a
BinaryItemStream.
With this change, we now add symbols that happen to appear contiguously
in bulk. For each .debug$S section (roughly one per function), we
allocate two copies, one for relocation, and one for realignment
purposes. For runs of symbols that go in the module stream, which is
most symbols, we now add them as a single ArrayRef<uint8_t>, so the
vector DbiModuleDescriptorBuilder is roughly linear in the number of
.debug$S sections (O(# funcs)) instead of the number of symbol records
(very large).
Some stats on symbol sizes for the curious:
PDB size: 507M
sym bytes: 316,508,016
sym count: 18,954,971
sym byte avg: 16.7
As future work, we may be able to skip copying symbol records in the
linker for realignment purposes if we make LLVM write them aligned into
the object file. We need to double check that such symbol records are
still compatible with link.exe, but if so, it's definitely worth doing,
since my profile shows we spend 500ms in memcpy in the symbol merging
code. We could potentially cut that in half by saving a copy.
Alternatively, we could apply the relocations *after* we iterate the
symbols. This would require some careful re-engineering of the
relocation processing code, though.
Reviewers: zturner, aganea, ruiu
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D54554
llvm-svn: 347687
When you have a member function with a ref-qualifier, for example:
struct Foo {
void Func() &;
void Func2() &&;
};
clang-cl was not emitting this information. Doing so is a bit
awkward, because it's not a property of the LF_MFUNCTION type, which
is what you'd expect. Instead, it's a property of the this pointer
which is actually an LF_POINTER. This record has an attributes
bitmask on it, and our handling of this bitmask was all wrong. We
had some parts of the bitmask defined incorrectly, but importantly
for this bug, we didn't know about these extra 2 bits that represent
the ref qualifier at all.
Differential Revision: https://reviews.llvm.org/D54667
llvm-svn: 347354
PointerAttributes is a bitwise-or of several other fields, each of
which is already printed on its own line with a better explanation.
So this doesn't really help much.
llvm-svn: 347275
Especially for symbolizer it can be efficient to have to search through
the entire index when it isn't needed - llvm-symbolizer looks up only a
few CUs & already has an index available in getUnitForEntry, once it's
passed down to DWARFUnitHeader::extract then there's no need for it to
call getFromOffset.
llvm-svn: 347134
This is a follow-up to r346715. Use PRIx64 to formatted print of 64-bit
value in the `DWARFDebugLoclists::LocationList::dump` to escape problem
on big-endian hosts.
llvm-svn: 347049
In a previous patch, we pre-processed the TPI stream in order to build
the reverse mapping from nested type -> parent type so that we could
accurately reconstruct a DeclContext hierarchy.
However, there were some issues. An LF_NESTTYPE record is really just a
typedef, so although it happens to be used to indicate the name of the
nested type and referring to the global record which defines the type,
it is also used for every other kind of nested typedef. When we rebuild
the DeclContext hierarchy, we want it to be as accurate as possible,
which means that if we have something like:
struct A {
struct B {};
using C = B;
};
We don't want to create two CXXRecordDecls in the AST each with the
exact same definition. We just want to create one for B and then
define C as an alias to B. Previously, however, it would not be able
to distinguish between the two cases and it would treat A::B and
A::C as being two classes each with separate definitions. We address
the first half of improving the pre-processing logic so that only
actual definitions are treated this way.
Later, in a followup patch, we can handle the case of nested
typedefs since we're already going to be enumerating the field list
anyway and this patch introduces the general framework for
distinguishing between the two cases.
Differential Revision: https://reviews.llvm.org/D54357
llvm-svn: 346786
The `DWARFDebugAddrTable::dump` routine prints 32/64-bits addresses.
These values are stored in a vector of `uint64_t` independently of their
original sizes. But `format` function gets format string with PRIx32
suffix in case of 32-bit address size. At least on MIPS 32-bit targets
that leads to incorrect output.
This patch changes formats strings and always use PRIx64 to print
`uint64_t` values.
Differential Revision: http://reviews.llvm.org/D54424
llvm-svn: 346715
This was being used as a sort of indirect out parameter from shouldDump
- seems simpler to use it as the actual result of the call. (this does
mean using a pointer to an Optional & actually using all 3 states (null,
None, and present) which is, admittedly, a tad subtle - but given the
limited scope, seems OK to me - open to discussion though, if others
feel strongly about it)
llvm-svn: 346691
Summary: The debug_info_offset values in .debug_{,gnu_}pub{name,types} may be relocated. Change it to DWARFSection so that we can get relocated values.
Reviewers: ruiu, dblaikie, grimar, JDevlieghere
Reviewed By: JDevlieghere
Subscribers: aprantl, JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D54375
llvm-svn: 346615
Michael J. Spencer