This adds a new command line option -mprefer-vector-width to specify a preferred vector width for the vectorizers. Valid values are 'none' and unsigned integers. The driver will check that it meets those constraints. Specific supported integers will be managed by the targets in the backend.
Clang will take the value and add it as a new function attribute during CodeGen.
This represents the alternate direction proposed by Sanjay in this RFC: http://lists.llvm.org/pipermail/llvm-dev/2017-November/118734.html
The syntax here matches gcc, though gcc treats it as an x86 specific command line argument. gcc only allows values of 128, 256, and 512. I'm not having clang check any values.
Differential Revision: https://reviews.llvm.org/D40230
llvm-svn: 320419
As reported in llvm bugzilla 32377.
Here’s a patch to add preinclude of stdc-predef.h.
The gcc documentation says “On GNU/Linux, <stdc-predef.h> is pre-included.” See https://gcc.gnu.org/gcc-4.8/porting_to.html;
The preinclude is inhibited with –ffreestanding.
Basically I fixed the failing test cases by adding –ffreestanding which inhibits this behavior.
I fixed all the failing tests, including some in extra/test, there's a separate patch for that which is linked here
Note: this is a recommit after a test failure took down the original (r318669)
Patch By: mibintc
Differential Revision: https://reviews.llvm.org/D34158
llvm-svn: 320391
This adds -std=c17, -std=gnu17, and -std=iso9899:2017 as language mode flags for C17 and updates the value of __STDC_VERSION__ to the value based on the C17 FDIS. Given that this ballot cannot succeed until 2018, it is expected that we (and GCC) will add c18 flags as aliases once the ballot passes.
llvm-svn: 320089
Summary:
The -fxray-always-emit-customevents flag instructs clang to always emit
the LLVM IR for calls to the `__xray_customevent(...)` built-in
function. The default behaviour currently respects whether the function
has an `[[clang::xray_never_instrument]]` attribute, and thus not lower
the appropriate IR code for the custom event built-in.
This change allows users calling through to the
`__xray_customevent(...)` built-in to always see those calls lowered to
the corresponding LLVM IR to lay down instrumentation points for these
custom event calls.
Using this flag enables us to emit even just the user-provided custom
events even while never instrumenting the start/end of the function
where they appear. This is useful in cases where "phase markers" using
__xray_customevent(...) can have very few instructions, must never be
instrumented when entered/exited.
Reviewers: rnk, dblaikie, kpw
Subscribers: cfe-commits
Differential Revision: https://reviews.llvm.org/D40601
llvm-svn: 319388
This is a re-apply of r319294.
adds -fseh-exceptions and -fdwarf-exceptions flags
clang will check if the user has specified an exception model flag,
in the absense of specifying the exception model clang will then check
the driver default and append the model flag for that target to cc1
-fno-exceptions has a higher priority then specifying the model
move __SEH__ macro definitions out of Targets into InitPreprocessor
behind the -fseh-exceptions flag
move __ARM_DWARF_EH__ macrodefinitions out of verious targets and into
InitPreprocessor behind the -fdwarf-exceptions flag and arm|thumb check
remove unused USESEHExceptions from the MinGW Driver
fold USESjLjExceptions into a new GetExceptionModel function that
gives the toolchain classes more flexibility with eh models
Reviewers: rnk, mstorsjo
Differential Revision: https://reviews.llvm.org/D39673
llvm-svn: 319297
adds -fseh-exceptions and -fdwarf-exceptions flags
clang will check if the user has specified an exception model flag,
in the absense of specifying the exception model clang will then check
the driver default and append the model flag for that target to cc1
clang cc1 assumes dwarf is the default if none is passed
and -fno-exceptions has a higher priority then specifying the model
move __SEH__ macro definitions out of Targets into InitPreprocessor
behind the -fseh-exceptions flag
move __ARM_DWARF_EH__ macrodefinitions out of verious targets and into
InitPreprocessor behind the -fdwarf-exceptions flag and arm|thumb check
remove unused USESEHExceptions from the MinGW Driver
fold USESjLjExceptions into a new GetExceptionModel function that
gives the toolchain classes more flexibility with eh models
Reviewers: rnk, mstorsjo
Differential Revision: https://reviews.llvm.org/D39673
llvm-svn: 319294
This is an instrumentation flag that's similar to
-finstrument-functions, but it only inserts calls on function entry, the
calls are inserted post-inlining, and they don't take any arugments.
This is intended for users who want to instrument function entry with
minimal overhead.
(-pg would be another alternative, but forces frame pointer emission and
affects link flags, so is probably best left alone to be used for
generating gcov data.)
Differential revision: https://reviews.llvm.org/D40276
llvm-svn: 318785
As reported in llvm bugzilla 32377.
Here’s a patch to add preinclude of stdc-predef.h.
The gcc documentation says “On GNU/Linux, <stdc-predef.h> is pre-included.”
See https://gcc.gnu.org/gcc-4.8/porting_to.html;
The preinclude is inhibited with –ffreestanding.
Basically I fixed the failing test cases by adding –ffreestanding which inhibits
this behavior.
I fixed all the failing tests, including some in extra/test, there's a separate
patch for that which is linked here
Patch By: mibintc
Differential Revision: https://reviews.llvm.org/D34158
llvm-svn: 318669
This updates -mcount to use the new attribute names (LLVM r318195), and
switches over -finstrument-functions to also use these attributes rather
than inserting instrumentation in the frontend.
It also adds a new flag, -finstrument-functions-after-inlining, which
makes the cygprofile instrumentation get inserted after inlining rather
than before.
Differential Revision: https://reviews.llvm.org/D39331
llvm-svn: 318199
Added support for regcall as default calling convention. Also added code to
exclude main when applying default calling conventions.
Patch-By: eandrews
Differential Revision: https://reviews.llvm.org/D39210
llvm-svn: 317268
Summary:
This change allows generalizing pointers in type signatures used for
cfi-icall by enabling the -fsanitize-cfi-icall-generalize-pointers flag.
This works by 1) emitting an additional generalized type signature
metadata node for functions and 2) llvm.type.test()ing for the
generalized type for translation units with the flag specified.
This flag is incompatible with -fsanitize-cfi-cross-dso because it would
require emitting twice as many type hashes which would increase artifact
size.
Reviewers: pcc, eugenis
Reviewed By: pcc
Subscribers: kcc
Differential Revision: https://reviews.llvm.org/D39358
llvm-svn: 317044
GCC tries to shorten system headers in depfiles using its real path
(resolving components like ".." and following symlinks). Mimic this
feature to ensure that the Ninja build tool detects the correct
dependencies when a symlink changes directory levels, see
https://github.com/ninja-build/ninja/issues/1330
An option to disable this feature is added in case "these changed header
paths may conflict with some compilation environments", see
https://gcc.gnu.org/ml/gcc-patches/2012-09/msg00287.html
Note that the original feature request for GCC
(https://gcc.gnu.org/bugzilla/show_bug.cgi?id=52974) also included paths
preprocessed output (-E) and diagnostics. That is not implemented now
since I am not sure if it breaks something else.
Differential Revision: https://reviews.llvm.org/D37954
llvm-svn: 316193
Currently all the consecutive bitfields are wrapped as a large integer unless there is unamed zero sized bitfield in between. The patch provides an alternative manner which makes the bitfield to be accessed as separate memory location if it has legal integer width and is naturally aligned. Such separate bitfield may split the original consecutive bitfields into subgroups of consecutive bitfields, and each subgroup will be wrapped as an integer. Now This is all controlled by an option -ffine-grained-bitfield-accesses. The alternative of bitfield access manner can improve the access efficiency of those bitfields with legal width and being aligned, but may reduce the chance of load/store combining of other bitfields, so it depends on how the bitfields are defined and actually accessed to choose when to use the option. For now the option is off by default.
Differential revision: https://reviews.llvm.org/D36562
llvm-svn: 315915
Move the logic for determining the `wchar_t` type information into the
driver. Rather than passing the single bit of information of
`-fshort-wchar` indicate to the frontend the desired type of `wchar_t`
through a new `-cc1` option of `-fwchar-type` and indicate the
signedness through `-f{,no-}signed-wchar`. This replicates the current
logic which was spread throughout Basic into the
`RenderCharacterOptions`.
Most of the changes to the tests are to ensure that the frontend uses
the correct type. Add a new test set under `test/Driver/wchar_t.c` to
ensure that we calculate the proper types for the various cases.
llvm-svn: 315126
to have child entries describing the template parameters. This will
be on by default for SCE tuning.
Differential Revision: https://reviews.llvm.org/D14358
llvm-svn: 314444
Extend the -fmodule-file option to support the [<name>=]<file> value format.
If the name is omitted, then the old semantics is preserved (the module file
is loaded whether needed or not). If the name is specified, then the mapping
is treated as just another prebuilt module search mechanism, similar to
-fprebuilt-module-path, and the module file is only loaded if actually used
(e.g., via import). With one exception: this mapping also overrides module
file references embedded in other modules (which can be useful if module files
are moved/renamed as often happens during remote compilation).
This override semantics requires some extra work: we now store the module name
in addition to the file name in the serialized AST representation.
Reviewed By: rsmith
Differential Revision: https://reviews.llvm.org/D35020
llvm-svn: 312220
Extend the -fmodule-file option to support the [<name>=]<file> value format.
If the name is omitted, then the old semantics is preserved (the module file
is loaded whether needed or not). If the name is specified, then the mapping
is treated as just another prebuilt module search mechanism, similar to
-fprebuilt-module-path, and the module file is only loaded if actually used
(e.g., via import). With one exception: this mapping also overrides module
file references embedded in other modules (which can be useful if module files
are moved/renamed as often happens during remote compilation).
This override semantics requires some extra work: we now store the module name
in addition to the file name in the serialized AST representation.
Reviewed By: rsmith
Differential Revision: https://reviews.llvm.org/D35020
llvm-svn: 312105
Summary:
An implementation of ubsan runtime library suitable for use in production.
Minimal attack surface.
* No stack traces.
* Definitely no C++ demangling.
* No UBSAN_OPTIONS=log_file=/path (very suid-unfriendly). And no UBSAN_OPTIONS in general.
* as simple as possible
Minimal CPU and RAM overhead.
* Source locations unnecessary in the presence of (split) debug info.
* Values and types (as in A+B overflows T) can be reconstructed from register/stack dumps, once you know what type of error you are looking at.
* above two items save 3% binary size.
When UBSan is used with -ftrap-function=abort, sometimes it is hard to reason about failures. This library replaces abort with a slightly more informative message without much extra overhead. Since ubsan interface in not stable, this code must reside in compiler-rt.
Reviewers: pcc, kcc
Subscribers: srhines, mgorny, aprantl, krytarowski, llvm-commits
Differential Revision: https://reviews.llvm.org/D36810
llvm-svn: 312029
This patch adds a flag -fclang-abi-compat that can be used to request that
Clang attempts to be ABI-compatible with some older version of itself.
This is provided on a best-effort basis; right now, this can be used to undo
the ABI change in r310401, reverting Clang to its prior C++ ABI for pass/return
by value of class types affected by that change, and to undo the ABI change in
r262688, reverting Clang to using integer registers rather than SSE registers
for passing <1 x long long> vectors. The intent is that we will maintain this
backwards compatibility path as we make ABI-breaking fixes in future.
The reversion to the old behavior for r310401 is also applied to the PS4 target
since that change is not part of its platform ABI (which is essentially to do
whatever Clang 3.2 did).
llvm-svn: 311823
Summary: With accurate sample profile, we can do more aggressive size optimization. For some size-critical application, this can reduce the text size by 20%
Reviewers: davidxl, rsmith
Reviewed By: davidxl, rsmith
Subscribers: mehdi_amini, eraman, sanjoy, cfe-commits
Differential Revision: https://reviews.llvm.org/D37091
llvm-svn: 311707
Summary:
Augment SanitizerCoverage to insert maximum stack depth tracing for
use by libFuzzer. The new instrumentation is enabled by the flag
-fsanitize-coverage=stack-depth and is compatible with the existing
trace-pc-guard coverage. The user must also declare the following
global variable in their code:
thread_local uintptr_t __sancov_lowest_stack
https://bugs.llvm.org/show_bug.cgi?id=33857
Reviewers: vitalybuka, kcc
Reviewed By: vitalybuka
Subscribers: kubamracek, hiraditya, cfe-commits, llvm-commits
Differential Revision: https://reviews.llvm.org/D36839
llvm-svn: 311186
This option when combined with -mgpopt and -membedded-data places all
uninitialized constant variables in the read-only section.
Reviewers: atanasyan, nitesh.jain
Differential Revision: https://reviews.llvm.org/D35917
llvm-svn: 309940
Summary:
Changed EABIVersion type from string to llvm::EABI.
It seems it was just a typo and this is intended implementation.
Differential Revision: https://reviews.llvm.org/D34595
llvm-svn: 306953
Summary:
Un-revert https://reviews.llvm.org/D34868, but with a slight tweak to the
documentation to fix an error -- I had used the wrong syntax for a link.
llvm-svn: 306948
Summary:
Depends on https://reviews.llvm.org/D34867.
Add a Clang frontend option to enable optimization remark hotness
thresholds, which were added to LLVM in https://reviews.llvm.org/D34867.
This prevents diagnostics that do not meet a minimum hotness
threshold from being output. When generating optimization remarks for large
codebases with a ton of cold code paths, this option can be used
to limit the optimization remark output at a reasonable size.
Discussion of this change can be read here:
http://lists.llvm.org/pipermail/llvm-dev/2017-June/114377.html
Reviewers: anemet, davidxl, hfinkel
Reviewed By: anemet
Subscribers: fhahn, cfe-commits
Differential Revision: https://reviews.llvm.org/D34868
llvm-svn: 306945
basic block vectorizer. This vectorizer has had no known users for many,
many years and is completely surpassed by the normal
'-fvectorize-slp'-controlled SLP vectorizer in LLVM.
Hal proposed this back in 2014 to no objections:
http://lists.llvm.org/pipermail/llvm-dev/2014-November/079091.html
While this patch completely removes the flag, Joerg is working on
a patch that will add it back in a way that warns users and ignores the
flag in a clear and well factored way (so that we can keep doing this
going forward).
Differential Revision: https://reviews.llvm.org/D34846
llvm-svn: 306786
a c++17 aligned allocation/deallocation function that is unavailable in
the standard library on Apple platforms.
The aligned functions are implemented only in the following versions or
later versions of the OSes, so clang issues diagnostics if the deployment
target being targeted is older than these:
macosx: 10.13
ios: 11.0
tvos: 11.0
watchos: 4.0
The diagnostics are issued whenever the aligned functions are selected
except when the selected function has a definition in the same file.
If there is a user-defined function available somewhere else, option
-Wno-aligned-allocation-unavailable can be used to silence the
diagnostics.
rdar://problem/32664169
Differential Revision: https://reviews.llvm.org/D34574
llvm-svn: 306722
Summary: Device offloading requires the specification of an additional flag containing the triple of the //other// architecture the code is being compiled on if such an architecture exists. If compiling for the host, the auxiliary triple flag will contain the triple describing the device and vice versa.
Reviewers: arpith-jacob, sfantao, caomhin, carlo.bertolli, ABataev, Hahnfeld, jlebar, hfinkel, tstellar
Reviewed By: Hahnfeld
Subscribers: rengolin, cfe-commits
Differential Revision: https://reviews.llvm.org/D29339
llvm-svn: 306689
Restore the `-gz` option to the driver with some minor tweaks to handle
the additional case for `-Wa,--compress-debug-sections`.
This intends to make the compression of the debug information
controllable from the driver. The following is the behaviour:
-gz enable compression (ambiguous for format, will default to zlib-gnu)
-gz=none disable compression
-gz=zlib-gnu enable compression (deprecated GNU style zlib compression)
-gz=zlib enable compression (zlib based compression)
Although -Wa,-compress-debug-sections works, it should be discouraged
when using the driver to invoke the assembler. However, we permit the
assembler to accept the GNU as style argument --compress-debug-sections
to maintain compatibility.
Note, -gz/-gz= does *NOT* imply -g. That is, you need to additionally
specific -g for debug information to be generated.
llvm-svn: 306115
Summary:
Prior to this change, using `-fdiagnostics-show-hotness` with a sampling
profile specified via `-fprofile-sample-use=` would result in the Clang
frontend emitting a warning: "argument '-fdiagnostics-show-hotness' requires
profile-guided optimization information". Of course, a sampling profile
*is* profile-guided optimization information, so the warning is misleading.
Furthermore, despite the warning, hotness was displayed based on the data in
the sampling profile.
Prevent the warning from being emitted when a sampling profile is used, and
add a test that verifies this.
Reviewers: anemet, davidxl
Reviewed By: davidxl
Subscribers: danielcdh, cfe-commits
Differential Revision: https://reviews.llvm.org/D34082
llvm-svn: 306079
for preprocessing
r300667 added support for editor placeholder to Clang. That commit didn’t take
into account that users who use Clang for preprocessing only (-E) will get the
"editor placeholder in source file" error when preprocessing their source
(PR33394). This commit ensures that Clang doesn't lex editor placeholders when
running a preprocessor only action.
rdar://32718000
Differential Revision: https://reviews.llvm.org/D34256
llvm-svn: 305576
Summary:
It seems -flto must be either "thin" or "full". I think the use of
containValue is just a typo.
Reviewers: ruiu, tejohnson
Subscribers: mehdi_amini, inglorion
Differential Revision: https://reviews.llvm.org/D34055
llvm-svn: 305392
cc1as does not currently access the "--" version of this flag. At the
very least this needs to be fixed and proper test cases need to be
added.
Simple reproducer:
clang -Wa,--compress-debug-sections /tmp/test.cc
Result:
error: unknown argument: '--compress-debug-sections'
llvm-svn: 305182
These options control the behaviour of the compression of debug info
sections on ELF targets. Our behaviour slightly diverges from the
behaviour of GCC. `-gz` maps to the `-compress-debug-sections` rather
than `-compress-debug-sections=zlib` or
`-compress-debug-sections=zlib-gnu`. This small divergence allows us to
be compatible across versions of binutils (=zlib support was introduced
in 2.26, while earlier versions only support =zlib-gnu). This also
allows users to not have to worry about the version of the assembler
they may be using if they are not using the IAS. Previously, users
would have had to go through the internal option
`-compress-debug-sectionss` and pass that through to the assembler,
which is no longer needed.
llvm-svn: 305165
If specified, when preprocessing, the contents of imported .pcm files will be
included in preprocessed output. The resulting preprocessed file can then be
compiled standalone without the module sources or .pcm files.
llvm-svn: 305116
This is tied with the LLVM side of the change to expose the debug
information compression types to clang. We now track the compression
type as an enumeration rather than a boolean. We still use the same
value (GNU) that we did previously. This is in preparation to support
passing down the compression type and switch it based on the command
line.
llvm-svn: 305039
This patch makes it an error to have a mismatch between the enabled
sanitizers in a CU, and in any module being imported into the CU. Only
mismatches between non-modular sanitizers are treated as errors.
This patch also includes non-modular sanitizers in module hashes, in
order to ensure module rebuilds occur when -fsanitize=X is toggled on
and off for non-modular sanitizers, and to cut down on module rebuilds
when the option is toggled for modular sanitizers.
This fixes a longstanding issue with implicit modules and sanitizers,
which Duncan originally diagnosed.
When building with implicit modules it's possible to hit a scenario
where modules are built without -fsanitize=address, and are subsequently
imported into CUs with -fsanitize=address enabled. This causes strange
failures at runtime. The case Duncan found affects libcxx, since its
vector implementation behaves differently when ASan is enabled.
Implicit module builds should "just work" when -fsanitize=X is toggled
on and off across multiple compiler invocations, which is what this
patch does.
Differential Revision: https://reviews.llvm.org/D32724
llvm-svn: 304463
Amongst other, this will help LTO to correctly handle/honor files
compiled with O0, helping debugging failures.
It also seems in line with how we handle other options, like how
-fnoinline adds the appropriate attribute as well.
Differential Revision: https://reviews.llvm.org/D28404
llvm-svn: 304127
There's a Microsoft header in the Windows SDK which won't
compile with clang because it uses an operator name (and)
as a field name. This patch allows that file to compile by
setting the option which disables operator names.
The header which doesn't compile <Query.h> C:/Program Files (x86)/
Windows Kits/10/include/10.0.14393.0/um\Query.h:259:40:
error: expected member name or ';' after declaration specifiers
/* [case()] */ NODERESTRICTION or;
~~~~~~~~~~~~~~~ ^
1 error generated.
Contributed for Melanie Blower
Differential Revision:https://reviews.llvm.org/D33505
llvm-svn: 303798
When a diagnostic includes a highlighted range spanning multiple lines, clang
now supports printing out multiple lines of context if necessary to show the
highlighted ranges. This is not yet exposed in the driver, but can be enabled
by "-Xclang -fcaret-diagnostics-max-lines -Xclang N".
This is experimental until we can find out whether it works well in practice,
and if so, what a good default for the maximum number of lines is.
llvm-svn: 303589
This feature is subtly broken when the linker is gold 2.26 or
earlier. See the following bug for details:
https://sourceware.org/bugzilla/show_bug.cgi?id=19002
Since the decision needs to be made at compilation time, we can not
test the linker version. The flag is off by default on ELF targets,
and on otherwise.
llvm-svn: 302591
action to the general FrontendAction infrastructure.
This permits applying -E, -ast-dump, -fsyntax-only, and so on to a module map
compilation. (The -E form is not currently especially useful yet as there's no
good way to take the output and use it to actually build a module.)
In order to support this, -cc1 now accepts -x <lang>-module-map in all cases
where it accepts -x <lang> for a language we can parse (not ir/ast). And for
uniformity, we also accept -x <lang>-header for all such languages (we used
to reject for cuda and renderscript), and -x <lang>-cpp-output for all such
languages (we used to reject for c, cl, and renderscript).
(None of these new alternatives are accepted by the driver yet, so no
user-visible changes.)
llvm-svn: 301610
Don't list deprecated -std= values (c++0x etc). Only produce one line of output
per standard, even if we know it by multiple names.
In passing, add missing -std=gnu++03 alias (supported by GCC), and add new
spelling '-std=cl1.0' for OpenCL 1.0 for consistency with the other values,
with the same meaning as the preexisting '-std=cl'.
llvm-svn: 301507
We already prohibited this in most cases (in r130710), but had some bugs in our
enforcement of this rule. Specifically, this prevents the following
combinations:
* -x c -std=clN.M, which would previously effectively act as if -x cl were
used, despite the input being a C source file. (-x cl -std=cNN continues
to be disallowed.)
* -x c++ -std=cuda, which would previously select C++98 + CUDA, despite that
not being a C++ standard. (-x cuda -std=c++NN is still permitted, and
selects CUDA with the given C++ standard as its base language.
-x cuda -std=cuda is still supported with the meaning of CUDA + C++98.)
* -x renderscript -std=c++NN, which would previously form a hybrid "C++ with
RenderScript extensions" language. We could support such a thing, but
shouldn't do so by accident.
llvm-svn: 301497
Since Split DWARF needs to name the actual .dwo file that is generated,
it can't be known at the time the llvm::Module is produced as it may be
merged with other Modules before the object is generated and that object
may be generated with any name.
By passing the Split DWARF file name when LLVM is producing object code
the .dwo file name in the object file can match correctly.
The support for Split DWARF for implicit modules remains the same -
using metadata to store the dwo name and dwo id so that potentially
multiple skeleton CUs referring to different dwo files can be generated
from one llvm::Module.
llvm-svn: 301063
This commit teaches Clang to recognize editor placeholders that are produced
when an IDE like Xcode inserts a code-completion result that includes a
placeholder. Now when the lexer sees a placeholder token, it emits an
'editor placeholder in source file' error and creates an identifier token
that represents the placeholder. The parser/sema can now recognize the
placeholders and can suppress the diagnostics related to the placeholders. This
ensures that live issues in an IDE like Xcode won't get spurious diagnostics
related to placeholders.
This commit also adds a new compiler option named '-fallow-editor-placeholders'
that silences the 'editor placeholder in source file' error. This is useful
for an IDE like Xcode as we don't want to display those errors in live issues.
rdar://31581400
Differential Revision: https://reviews.llvm.org/D32081
llvm-svn: 300667
The driver needs to know whether it's building a module interface or
implementation unit because it affects which outputs it produces and how it
builds the command pipeline. But the frontend doesn't need to know and should
not care: all it needs to know is what action it is being asked to perform on
the input.
(This is in preparation for permitting -emit-obj to be used on a module
interface unit to produce object code without going via a "full" PCM file.)
llvm-svn: 300611
Remove the restriction where this is only valid with C++
rdar://problem/29055656
Differential Revision: https://reviews.llvm.org/D31781
llvm-svn: 300108
This allows using and testing these two features separately. (noteably,
debug info is, so far as I know, always a win (basically). But function
modular codegen is currently a loss for highly optimized code - where
most of the linkonce_odr definitions are optimized away, so providing
weak_odr definitions is only overhead)
llvm-svn: 300104
This isn't need anymore and modules options -fbuild-session-file and
-fmodules-validate-once-per-build-session already provide a sane
mechanism to validate the system headers.
rdar://problem/19767523
llvm-svn: 300027
Summary:
The refactoring introduced a regression in the flag processing for
-fxray-instruction-threshold which causes it to not get passed properly.
This change should restore the previous behaviour.
Reviewers: rnk, pelikan
Subscribers: cfe-commits
Differential Revision: https://reviews.llvm.org/D31491
llvm-svn: 299126
Summary:
The -fxray-always-instrument= and -fxray-never-instrument= flags take
filenames that are used to imbue the XRay instrumentation attributes
using a whitelist mechanism (similar to the sanitizer special cases
list). We use the same syntax and semantics as the sanitizer blacklists
files in the implementation.
As implemented, we respect the attributes that are already defined in
the source file (i.e. those that have the
[[clang::xray_{always,never}_instrument]] attributes) before applying
the always/never instrument lists.
Reviewers: rsmith, chandlerc
Subscribers: jfb, mgorny, cfe-commits
Differential Revision: https://reviews.llvm.org/D30388
llvm-svn: 299041
FPContractModeKind is the codegen option flag which is already ternary (off,
on, fast). This makes it universally the type for the contractable info
across the front-end:
* In FPOptions (i.e. in the Sema + in the expression nodes).
* In LangOpts::DefaultFPContractMode which is the option that initializes
FPOptions in the Sema.
Another way to look at this change is that before fp-contractable on/off were
the only states handled to the front-end:
* For "on", FMA folding was performed by the front-end
* For "fast", we simply forwarded the flag to TargetOptions to handle it in
LLVM
Now off/on/fast are all exposed because for fast we will generate
fast-math-flags during CodeGen.
This is toward moving fp-contraction=fast from an LLVM TargetOption to a
FastMathFlag in order to fix PR25721.
---
This is a recommit of r299027 with an adjustment to the test
CodeGenCUDA/fp-contract.cu. The test assumed that even
though -ffp-contract=on is passed FE-based folding of FMA won't happen.
This is obviously wrong since the user is asking for this explicitly with the
option. CUDA is different that -ffp-contract=fast is on by default.
The test used to "work" because contract=fast and contract=on were maintained
separately and we didn't fold in the FE because contract=fast was on due to
the target-default. This patch consolidates the contract=on/fast/off state
into a ternary state hence the change in behavior.
---
Differential Revision: https://reviews.llvm.org/D31167
llvm-svn: 299033
FPContractModeKind is the codegen option flag which is already ternary (off,
on, fast). This makes it universally the type for the contractable info
across the front-end:
* In FPOptions (i.e. in the Sema + in the expression nodes).
* In LangOpts::DefaultFPContractMode which is the option that initializes
FPOptions in the Sema.
Another way to look at this change is that before fp-contractable on/off were
the only states handled to the front-end:
* For "on", FMA folding was performed by the front-end
* For "fast", we simply forwarded the flag to TargetOptions to handle it in
LLVM
Now off/on/fast are all exposed because for fast we will generate
fast-math-flags during CodeGen.
This is toward moving fp-contraction=fast from an LLVM TargetOption to a
FastMathFlag in order to fix PR25721.
Differential Revision: https://reviews.llvm.org/D31167
llvm-svn: 299027
The flag CXXOperatorNames was overwritten unconditionally
after being set for OpenCL.
There seems to be no necessity to set it, so removing the line.
llvm-svn: 298709
Summary:
Clang companion patch to LLVM patch D31027, which adds support
for emitting minimized bitcode file for use in the thin link step.
Add a cc1 option -fthin-link-bitcode=<file> to trigger this behavior.
Depends on D31027.
Reviewers: mehdi_amini, pcc
Subscribers: cfe-commits, Prazek
Differential Revision: https://reviews.llvm.org/D31050
llvm-svn: 298639
The alias was only ever used on darwin and had some issues there,
and isn't used in practice much. Also fixes a problem with -mno-altivec
not turning off -maltivec.
Also add a diagnostic for faltivec/fno-altivec that directs users to use
maltivec options and include the altivec.h file explicitly.
llvm-svn: 298449
This fixes lookup mismatches that could happen when the module cache
path contained a '/./' component.
<rdar://problem/30413458>
Differential Revision: https://reviews.llvm.org/D30915
llvm-svn: 297790
Change ASTFileSignature from a random 32-bit number to the hash of the
PCM content.
- Move definition ASTFileSignature to Basic/Module.h so Module and
ASTSourceDescriptor can use it.
- Change the signature from uint64_t to std::array<uint32_t,5>.
- Stop using (saving/reading) the size and modification time of PCM
files when there is a valid SIGNATURE.
- Add UNHASHED_CONTROL_BLOCK, and use it to store the SIGNATURE record
and other records that shouldn't affect the hash. Because implicit
modules reuses the same file for multiple levels of -Werror, this
includes DIAGNOSTIC_OPTIONS and DIAG_PRAGMA_MAPPINGS.
This helps to solve a PCH + implicit Modules dependency issue: PCH files
are handled by the external build system, whereas implicit modules are
handled by internal compiler build system. This prevents invalidating a
PCH when the compiler overwrites a PCM file with the same content
(modulo the diagnostic differences).
Design and original patch by Manman Ren!
llvm-svn: 297655
This commit adds support for a new -iframeworkwithsysroot compiler option which
allows the user to specify a framework path that can be prefixed with the
sysroot. This option is similar to the -iwithsysroot option that exists to
supplement -isystem.
rdar://21316352
Differential Revision: https://reviews.llvm.org/D30183
llvm-svn: 297614
Craig Topper