The _gp_disp symbol designates offset between start of function and 'gp'
pointer into GOT. The following code is a typical MIPS function preamble
used to setup $gp register:
lui $gp, %hi(_gp_disp)
addi $gp, $gp, %lo(_gp_disp)
To calculate R_MIPS_HI16 / R_MIPS_LO16 relocations results we use
the following formulas:
%hi(_gp - P + A)
%lo(_gp - P + A + 4),
where _gp is a value of _gp symbol, A is addend, and P current address.
The R_MIPS_LO16 relocation references _gp_disp symbol is always the second
instruction. That is why we need four byte adjustments. The patch assigns
R_PC type for R_MIPS_LO16 relocation and adjusts its addend by 4. That fix
R_MIPS_LO16 calculation.
For details see p. 4-19 at ftp://www.linux-mips.org/pub/linux/mips/doc/ABI/mipsabi.pdf
Differential Revision: http://reviews.llvm.org/D19115
llvm-svn: 266368
With this patch we use the first scan over the relocations to remember
the information we found about them: will them be relaxed, will a plt be
used, etc.
With that the actual relocation application becomes much simpler. That
is particularly true for the interfaces in Target.h.
This unfortunately means that we now do two passes over relocations for
non SHF_ALLOC sections. I think this can be solved by factoring out the
code that scans a single relocation. It can then be used both as a scan
that record info and for a dedicated direct relocation of non SHF_ALLOC
sections.
I also think it is possible to reduce the number of enum values by
representing a target with just an OutputSection and an offset (which
can be from the start or end).
This should unblock adding features like relocation optimizations.
llvm-svn: 266158
This patch fixes dynamic relocation creation from GOT access in dynamic
objects on aarch64. Current code creates a plt relative one
(R_AARCH64_JUMP_SLOT) instead of a got relative (R_AARCH64_GLOB_DAT).
It leads the programs fails with:
$ cat t.cc
std::string test = "hello...\n";
int main ()
{
printf ("%s\n", test.c_str());
return 0;
}
$ clang++ t.cc -fpic -o t
$ ./t
hello...
Segmentation fault (core dumped)
Due the fact it will try to access the plt instead of the got for
__cxa_atexit registration for the std::string destruction. It will
lead in a bogus function address in atexit.
llvm-svn: 265784
Similar to r265462, TLS related relocations aren't marked as relative,
meaning that we end up generating R_AARCH64_RELATIVE relocations for
them. This change adds TLS relocations that I've seen on my system. With
this patch applied CloudABI's unit testing binary now passes on aarch64.
Approved by: ruiu
Differential Revision: http://reviews.llvm.org/D18816
llvm-svn: 265575
While trying to get PIE work on CloudABI for x86-64, I noticed that even
though GNU ld would generate functional binaries, LLD would not. It
turns out that we generate relocations for referencing TLS objects
inside of the text segment, which shouldn't happen.
This change extends the isRelRelative() function to list some additional
relocation types that should be treated as relative. This makes my C
library unit testing binary work on x86-64.
Approved by: ruiu
Differential Revision: http://reviews.llvm.org/D18688
Fixes bug: https://llvm.org/bugs/show_bug.cgi?id=27174
llvm-svn: 265462
Our symbol representation was redundant, and some times would get out of
sync. It had an Elf_Sym, but some fields were copied to SymbolBody.
Different parts of the code were checking the bits in SymbolBody and
others were checking Elf_Sym.
There are two general approaches to fix this:
* Copy the required information and don't store and Elf_Sym.
* Don't copy the information and always use the Elf_Smy.
The second way sounds tempting, but has a big problem: we would have to
template SymbolBody. I started doing it, but it requires templeting
*everything* and creates a bit chicken and egg problem at the driver
where we have to find ELFT before we can create an ArchiveFile for
example.
As much as possible I compared the test differences with what gold and
bfd produce to make sure they are still valid. In most cases we are just
adding hidden visibility to a local symbol, which is harmless.
In most tests this is a small speedup. The only slowdown was scylla
(1.006X). The largest speedup was clang with no --build-id, -O3 or
--gc-sections (i.e.: focus on the relocations): 1.019X.
llvm-svn: 265293
The extra fix is to note that it still requires copy relocations.
Original message:
Change how we handle R_MIPS_LO16.
Mips aligns PT_LOAD to 16 bits (0x10000). That means that the lower 16
bits are always the same, so we can, effectively, say that the
relocation is relative.
P.S.: Suggestions for a better name for the predicate are welcome :-)
llvm-svn: 265150
Some targets might require creation of thunks. For example, MIPS targets
require stubs to call PIC code from non-PIC one. The patch implements
infrastructure for thunk code creation and provides support for MIPS
LA25 stubs. Any MIPS PIC code function is invoked with its address
in register $t9. So if we have a branch instruction from non-PIC code
to the PIC one we cannot make the jump directly and need to create a small
stub to save the target function address.
See page 3-38 ftp://www.linux-mips.org/pub/linux/mips/doc/ABI/mipsabi.pdf
- In relocation scanning phase we ask target about thunk creation necessity
by calling `TagetInfo::needsThunk` method. The `InputSection` class
maintains list of Symbols requires thunk creation.
- Reassigning offsets performed for each input sections after relocation
scanning complete because position of each section might change due
thunk creation.
- The patch introduces new dedicated value for DefinedSynthetic symbols
DefinedSynthetic::SectionEnd. Synthetic symbol with that value always
points to the end of the corresponding output section. That allows to
escape updating synthetic symbols if output sections sizes changes after
relocation scanning due thunk creation.
- In the `InputSection::writeTo` method we write thunks after corresponding
input section. Each thunk is written by calling `TargetInfo::writeThunk` method.
- The patch supports the only type of thunk code for each target. For now,
it is enough.
Differential Revision: http://reviews.llvm.org/D17934
llvm-svn: 265059
We have to check the final value that is written.
I don't think this has any real word implications (unless something
supports unaligned instructions), but unblocks simplifying the handling
of PC relative relocations.
llvm-svn: 265009
If we make R_MIPS_LO16 a relative relocation, linker:
- never creates R_MIPS_COPY relocation for it
- attempts to create R_MIPS_REL32 dynamic relocation if R_MIPS_LO16's
target is a preemptible symbol
Differential Revision: http://reviews.llvm.org/D18607
llvm-svn: 264956
This simplifies a few things
* Read the value as early as possible, instead of passing a pointer to
the location.
* Print the warning for missing pair close to where we find out it is
missing.
* Don't pass the value to relocateOne.
llvm-svn: 264802
Mips aligns PT_LOAD to 16 bits (0x10000). That means that the lower 16
bits are always the same, so we can, effectively, say that the
relocation is relative.
llvm-svn: 264761
When R_X86_64_PC32/R_X86_64_32 relocations are
used against preemptible symbol and output is position independent,
error should be generated.
Differential revision: http://reviews.llvm.org/D18190
llvm-svn: 264707
This patch simplifies the isRelRelative for AArch64 and add the missing
ones for bootstrap and test-suite. It also adds more testing for
shared object creation.
llvm-svn: 264322
R_X86_64_GOTPCRELX and R_X86_64_REX_GOTPCRELX relocations were added in latest ABI:
https://github.com/hjl-tools/x86-psABI/wiki/x86-64-psABI-r249.pdf
They should be generated instead of R_X86_64_GOTPCREL for cases
when relaxation is possible. Currently this patch just process them in the
same way like R_X86_64_GOTPCREL. That should work for now
and we can implement relaxations later.
There is no testcases provided as I think there is no way to generate
such relocations using llvm-mc atm.
Differential revision: http://reviews.llvm.org/D18301
llvm-svn: 264043
-pie
--pic-executable
Create a position independent executable. This is currently only
supported on ELF platforms. Position independent executables are
similar to shared libraries in that they are relocated by the
dynamic linker to the virtual address the OS chooses for them
(which can vary between invocations). Like normal dynamically
linked executables they can be executed and symbols defined in the
executable cannot be overridden by shared libraries.
Differential revision: http://reviews.llvm.org/D18183
llvm-svn: 263693
We want to make SymbolBody the central place to query symbol information.
This patch also renames canBePreempted to isPreemptible because I feel that
the latter is slightly better (the former is three words and the latter
is two words.)
llvm-svn: 263386
which was reverted because included
unrelative changes by mistake.
Original commit message:
[ELF] - Change all messages to lowercase to be consistent.
That is directly opposite to http://reviews.llvm.org/D18045,
which was reverted.
This patch changes all messages to start from lowercase letter if
they were not before.
That is done to be consistent with clang.
Differential revision: http://reviews.llvm.org/D18085
llvm-svn: 263337
That is directly opposite to http://reviews.llvm.org/D18045,
which was reverted.
This patch changes all messages to start from lowercase letter if
they were not before.
That is done to be consistent with clang.
Differential revision: http://reviews.llvm.org/D18085
llvm-svn: 263252
It was discussed to make all messages be
lowercase to be consistent with clang.
(also reverts the r263128 which fixed
build bot fail after r263125)
Original commit message:
[ELF] - Consistent spelling for error/warning messages
Previously error and warnings were not consistent in lld.
Some of them started from lowercase letter, others from
uppercase. Also there was one or two which had a dot at the end.
This patch changes all messages to start from uppercase letter if
they were not before.
Differential revision: http://reviews.llvm.org/D18045
llvm-svn: 263240
R_X86_64_DTPOFF64 was not handled properly.
Next sample app was impossible to link before this patch:
~/pg/release/bin/clang -target x86_64-pc-linux testthread.cpp -c -g
~/pg/d+a/bin/ld.lld testthread.o
"Unknown TLS optimization" (value was 17)
__thread int x = 0;
void _start() {
}
It works fine now.
Differential revision: http://reviews.llvm.org/D18039
llvm-svn: 263150
Previously error and warnings were not consistent in lld.
Some of them started from lowercase letter, others from
uppercase. Also there was one or two which had a dot at the end.
This patch changes all messages to start from uppercase letter if
they were not before.
Differential revision: http://reviews.llvm.org/D18045
llvm-svn: 263125
It was a badly specified hack for when a tls relocation should be
propagated to the dynamic relocation table.
This replaces it with a not as bad hack of saying that a local dynamic
tls relocation is never preempted.
I will try to remove even that second hack in the next patch.
llvm-svn: 262955
Get rid of few accessors in that class, and replace
them with direct fields access.
Differential revision: http://reviews.llvm.org/D17879
llvm-svn: 262796
Patch changes the return type of Target::relaxTls
to size_t from unsigned. That is consistent with
its use from other code.
Change was reviewed http://reviews.llvm.org/D17882
and asked to commit separately from that patch above.
llvm-svn: 262794
Patch changes all relocations types to be uint32_t and also
fixes some dependent inconsistency in callers code.
Differential revision: http://reviews.llvm.org/D17882
llvm-svn: 262793
The rules for when we can relax tls relocations are target independent.
The only things that are target dependent are the relocation values.
llvm-svn: 262748
SymbolBody constructor and friends take isFunc and isTLS boolean arguments.
ELF symbols have already a type so than be easily passed as argument.
If we want to support another type, this scheme is not good enough, that is,
the current code logic would require passing another `bool isObject` around.
Up to two argument, this stretching exercise was a little bit goofy but
still acceptable, but with more types to support, is just too much, IMHO.
Change the code so that the type is passed instead.
Differential Revision: http://reviews.llvm.org/D17871
llvm-svn: 262684
The hack of using a plt address as the address of an undefined function
only works in executables. Don't try it with shared libraries.
llvm-svn: 262642
For shared libraries we allow any weak undefined symbol to eventually be
resolved, even if we never see a definition in another .so. This matches
the behavior when handling other undefined symbols in a shared library.
For executables, we require seeing a definition in a .so or resolve it
to zero. This is also similar to how non weak symbols are handled.
llvm-svn: 262017
When this code was first added it was compensating for the code deciding
to create plt entries for directly referenced functions being too aggressive.
That has since been fixed, so we don't need this anymore.
llvm-svn: 261933
This commit does two related thing. At first, it enumerates supported
absolute MIPS relocations in the `MipsTargetInfo<ELFT>::isRelRelative`
method. In that case the code is shorter and the case switch does not
tend to grow. At second, it prevents R_MIPS_COPY and PLT creation for
relative relocations. For almost all relative MIPS relocations like
R_MIPS_PC19_S2, R_MIPS_PCHI16 etc it does not have a sence. The only
exception is R_MIPS_PC32. GNU linker creates a copy relocation or PLT
entry for it. But I could not find any real test case uses R_MIPS_PC32
with DSO defined symbol as a target. So for now I prefer to skip this
case to simplify the LLD code.
llvm-svn: 261822
There is nothing aarch64 specific in here. If a symbol can be preempted,
we need to copy the full relocation to the dynamic linker.
If a symbol cannot be preempted, we can make the dynamic linker life
easier and produce a relative relocation.
This is directly equivalent to R_X86_64_64 to R_x86_64_RELATIVE
conversion.
llvm-svn: 261678
This patch fixes the R_AARCH64_ABS64 relocation when used in shared mode,
where it requires a dynamic R_AARCH64_RELATIVE relocation. To correct set
the addend on the dynamic relocation (since it will be used by the dynamic
linker), a new TargetInfo specific hook was created (getDynRelativeAddend)
to get the correct addend based on relocation type.
The patch fixes the issues when creating shared library code against
{init,fini}_array, where it issues R_AARCH64_ABS64 relocation against
local symbols.
llvm-svn: 261651
This patch adds some TLS relocations and relaxations for AArch64.
Some Global-Dynamic relocation are handled by optimizing them to
Local-Exec (Initial-Exec is not yet supported). They are:
- R_AARCH64_TLSDESC_ADR_PAGE21
- R_AARCH64_TLSDESC_LD64_LO12_NC
- R_AARCH64_TLSDESC_ADD_LO12_NC
- R_AARCH64_TLSDESC_CALL
Also some Init-Exec is optimized to Local-Exec if possible. They are:
- R_AARCH64_TLSIE_ADR_GOTTPREL_PAGE21
- R_AARCH64_TLSIE_LD64_GOTTPREL_LO12_NC
Finally some Local-Exec relocation are handled in relocateOne:
- R_AARCH64_TLSLE_ADD_TPREL_HI12
- R_AARCH64_TLSLE_ADD_TPREL_LO12_NC
This work is mainly for compiler bootstrap, where static binaries is
showing good progress (although shared object still lacking support
from both TLS aarch64 backend and some other issues).
llvm-svn: 260677
Previously, Target held a value until a new value is assigned to the
variable. That was a benign leak -- that was not an unbounded leak
and didn't grab any resources except a small amount of memory. But
it is better to fix than leaving as is.
llvm-svn: 260592
R_X86_64_TPOFF64 is a dynamic relocation,
it should not appear in static relocation processing.
Patch fixes it.
Differential revision: http://reviews.llvm.org/D16880
llvm-svn: 260508
The patch adds lazy relocation support for MIPS and R_MIPS_26 relocation
handing.
R_MIPS_26 relocation might require PLT entry creation. In that case it
is fully supported by the patch. But if the relocation target is a local
symbol we need to use a different expression to calculate the relocation
result. This case is not implemented yet because there is no method to
get know the kind of relocation target in the `relocateOne` routine.
Differential Revision: http://reviews.llvm.org/D16982
llvm-svn: 260424
MIPS 32-bit ABI uses REL relocation record format. We read addends from
relocation destinations right in the MipsTargetInfo::relocateOne
function.
llvm-svn: 260364
This is the function equivalent of a copy relocation.
Since functions are expected to change sizes, we cannot use copy
relocations. In situations where one would be needed, what is done
instead is:
* Create a plt entry
* Output an undefined symbol whose addr is the plt entry.
The dynamic linker makes sure any shared library uses the plt entry as
the function address.
llvm-svn: 260224
Symbol does not need an entry i the 'global' part of GOT if it cannot be
preempted. So canBePreempted fully satisfies us at least for now.
llvm-svn: 259779
Simon Atanasyan