When writing tests for a previous problem, I ran across situations where we
were not producing error messages for declarations of specific procedures of
generic interfaces where every other compiler I tested (except nvfotran) did.
I added a check to CheckExtantExternal() and renamed it since it now checks for
erroneous extant symbols generally.
I also removed a call to this function from processing for ENTRY statements,
since it seemed unnecessary and its presence caused bogus error messages.
I also added some tests for erroneous declarations where we were not producing
error messages.
Differential Revision: https://reviews.llvm.org/D99111
If you specify a specific procedure of a generic interface that has the same
name as both the generic interface and a preceding derived type, the compiler
would fail an internal call to CHECK(). I fixed this by testing for this
situation when processing specific procedures. I also added a test that will
cause the call to CHECK() to fail without this new code.
Differential Revision: https://reviews.llvm.org/D99085
This patch fixes a bug to allow ordered construct within a non-worksharing loop, also adds more sema checks.
Reviewed By: kiranchandramohan
Differential Revision: https://reviews.llvm.org/D98733
Replace semantics::SymbolSet with alternatives that clarify
whether the set should order its contents by source position
or not. This matters because positionally-ordered sets must
not be used for Symbols that might be subjected to name
replacement during name resolution, and address-ordered
sets must not be used (without sorting) in circumstances
where the order of their contents affects the output of the
compiler.
All set<> and map<> instances in the compiler that are keyed
by Symbols now have explicit Compare types in their template
instantiations. Symbol::operator< is no more.
Differential Revision: https://reviews.llvm.org/D98878
Adds support for `-fget-symbols-sources` in the new Flang driver. All
relevant tests are updated to use the new driver when
`FLANG_BUILD_NEW_DRIVER` is set.
`RUN` lines in tests are updated so `-fsyntax-only`
comes before `-fget-symbols-sources`. That's because:
* both `-fsyntax-only` and `-fget-symbols-sources` are
action flags, and
* the new driver, flang-new, will only consider the right-most
action flag.
In other words, this change is needed so that the tests work with both
`f18` (requires both flags) and `flang-new` (only considers the last
action flag).
Differential Revision: https://reviews.llvm.org/D98191
Added basic parsing/sema/serialization support for interop directive.
Support for the 'init' clause.
Differential Revision: https://reviews.llvm.org/D98558
1. Generate the mapping for clauses between the parser class and the
corresponding clause kind for OpenMP and OpenACC using tablegen.
2. Add a common function to get the OmpObjectList from the OpenMP
clauses to avoid repetition of code.
Reviewed by: Kiranchandramohan @kiranchandramohan , Valentin Clement @clementval
Differential Revision: https://reviews.llvm.org/D98603
In parser::AllCookedSources, implement a map from CharBlocks to
the CookedSource instances that they cover. This permits a fast
Find() operation based on std::map::equal_range to map a CharBlock
to its enclosing CookedSource instance.
Add a creation order number to each CookedSource. This allows
AllCookedSources to provide a Precedes(x,y) predicate that is a
true source stream ordering between two CharBlocks -- x is less
than y if it is in an earlier CookedSource, or in the same
CookedSource at an earlier position.
Add a reference to the singleton SemanticsContext to each Scope.
All of this allows operator< to be implemented on Symbols by
means of a true source ordering. From a Symbol, we get to
its Scope, then to the SemanticsContext, and then use its
AllCookedSources reference to call Precedes().
Differential Revision: https://reviews.llvm.org/D98743
`parser::AllocateObject` and `parser::PointerObject` can be represented
as typed expressions once analyzed. This simplifies the work for parse-tree
consumers that work with typed expressions to deal with allocatable and
pointer objects such as lowering.
This change also makes it easier to add typedExpr in the future by
automatically handling nodes that have this member when possible.
Changes:
- Add a `mutable TypedExpr typedExpr` field to `parser::PointerObject` and `parser::AllocateObject`.
- Add a `parser::HasTypedExpr<T>` helper to better share code relating to typedExpr in the parse tree.
- Add hooks in `semantics::ExprChecker` for AllocateObject and PointerObject nodes, and use
ExprOrVariable on it to analyze and set the tyedExpr field during
expression analysis. This required adding overloads for `AssumedTypeDummy`.
- Update check-nullify.cpp and check-deallocate.cpp to not re-analyze the StructureComponent but to
use the typedExpr field instead.
- Update dump/unparse to use HasTypedExpr and use the typedExpr when there is one.
Differential Revision: https://reviews.llvm.org/D98256
An older version of a function (Fortran::semantics::FindFunctionResult) was
left in flang/lib/Semantics/tools.cpp, and this breaks the static library
build due to a conflict with the intended final version in another
file and library. Remove the old code.
Differential Revision: https://reviews.llvm.org/D98568
Fortran permits a reference to a function whose result is a pointer
to be used as a definable variable in any context where a
designator could appear. This patch wrings out remaining bugs
with such usage and adds more testing.
The utility predicate IsProcedurePointer(expr) had a misleading
name which has been corrected to IsProcedurePointerTarget(expr).
Differential Revision: https://reviews.llvm.org/D98555
This allows for storage instances to store data that isn't uniqued in the context, or contain otherwise non-trivial logic, in the rare situations that they occur. Storage instances with trivial destructors will still have their destructor skipped. A consequence of this is that the storage instance definition must be visible from the place that registers the type.
Differential Revision: https://reviews.llvm.org/D98311
If you specify a type-bound procedure with an alternate return, there
will be no symbol associated with that dummy argument. In such cases,
the compiler's list of dummy arguments will contain a nullptr. In our
analysis of the PASS arguments of type-bound procedures, we were
assuming that all dummy arguments had non-null symbols associated with
them and were using that assumption to get the name of the dummy
argument. This caused the compiler to try to dereference a nullptr.
I fixed this by explicitly checking for a nullptr and, in such cases, emitting
an error message. I also added tests that contain type-bound procedures with
alternate returns in both legal and illegal constructs to ensure that semantic
analysis is working for them.
Differential Revision: https://reviews.llvm.org/D98430
You can define a base type with a type-bound procedure which is erroneously
missing a NOPASS attribute and then define another type that extends the base
type and overrides the erroneous procedure. In this case, when we perform
semantic checking on the overriding procedure, we verify the "pass index" of
the overriding procedure. The attempt to get the procedure's pass index fails
a call to CHECK().
I fixed this by calling SetError() on the symbol of the overridden procedure in
the base type. Then, I check HasError() before executing the code that invokes
the failing call to CHECK(). I also added a test that will cause the compiler
to fail the call to CHECK() without this change.
Differential Revision: https://reviews.llvm.org/D98355
The PFT has been updated to support Fortran 77.
clang-tidy cleanup.
Authors: Val Donaldson, Jean Perier, Eric Schweitz, et.al.
Differential Revision: https://reviews.llvm.org/D98283
This patch adds `-fdebug-dump-parsing-log` in the new driver. This option is
semantically identical to `-fdebug-instrumented-parse` in `f18` (the
former is added as an alias in `f18`).
As dumping the parsing log makes only sense for instrumented parses, we
set Fortran::parser::Options::instrumentedParse to `True` when
`-fdebug-dump-parsing-log` is used. This is consistent with `f18`.
To facilitate tweaking the configuration of the frontend based on the
action being requested, `setUpFrontendBasedOnAction` is introduced in
CompilerInvocation.cpp.
Differential Revision: https://reviews.llvm.org/D97457
When we have a subprogram that has been determined to contain errors, we do not
perform name resolution on its execution part. In this case, if the subprogram
contains a NULLIFY statement, the parser::Name of a pointer object in a NULLIFY
statement will not have had name resolution performed on it. Thus, its symbol
will not have been set. Later, however, we do semantic checking on the NULLIFY
statement. The code that did this assumed that the parser::Name of the
pointer object was non-null.
I fixed this by just removing the null pointer check for the "symbol" member of
the "parser::Name" of the pointer object when doing semantic checking for
NULLIFY statements. I also added a test that will make the compiler crash
without this change.
Differential Revision: https://reviews.llvm.org/D98184
Add diagnostic tests with fir-opt for the diagnostics emitted by the ops verifier
Reviewed By: jeanPerier
Differential Revision: https://reviews.llvm.org/D97996
Add support for the following Fortran dialect options:
- -default*
- -flarge-sizes
It also adds two test cases:
# For checking whether `flang-new` is passing options correctly to `flang-new -fc1`.
# For checking if `fdefault-` arguments are processed properly.
Also moves the Dialect related option parsing to a dedicated function
and adds a member `defaultKinds()` to `CompilerInvocation`
Depends on: D96032
Differential Revision: https://reviews.llvm.org/D96344
There is no need for the interface implementations to be exposed, opaque
registration functions are sufficient for all users, similarly to passes.
Reviewed By: mehdi_amini
Differential Revision: https://reviews.llvm.org/D97852
We were allowing procedures with the MODULE prefix to be declared at the global
scope. This is prohibited by C1547 and was causing an internal check of the
compiler to fail.
I fixed this by adding a check. I also added a test that would trigger a crash
without this change.
Differential Revision: https://reviews.llvm.org/D97875
It's possible to define a procedure whose interface depends on a procedure
which has an interface that depends on the original procedure. Such a circular
definition was causing the compiler to fall into an infinite loop when
resolving the name of the second procedure. It's also possible to create
circular dependency chains of more than two procedures.
I fixed this by adding the function HasCycle() to the class DeclarationVisitor
and calling it from DeclareProcEntity() to detect procedures with such
circularly defined interfaces. I marked the associated symbols of such
procedures by calling SetError() on them. When processing subsequent
procedures, I called HasError() before attempting to analyze their interfaces.
Unfortunately, this did not work.
With help from Tim, we determined that the SymbolSet used to track the
erroneous symbols was instantiated using a "<" operator which was defined using
the location of the name of the procedure. But the location of the procedure
name was being changed by a call to ReplaceName() between the times that the
calls to SetError() and HasError() were made. This caused HasError() to
incorrectly report that a symbol was not in the set of erroneous symbols.
I fixed this by changing SymbolSet to be an unordered set that uses the
contents of the name of the symbol as the basis for its hash function. This
works because the contents of the name of the symbol is preserved by
ReplaceName() even though its location changes.
I also fixed the error message used when reporting recursively defined
dummy procedure arguments by removing extra apostrophes and sorting the
list of symbols.
I also added tests that will crash the compiler without this change.
Note that the "<" operator is used in other contexts, for example, in the map
of characterized procedures, maps of items in equivalence sets, maps of
structure constructor values, ... All of these situations happen after name
resolution has been completed and all calls to ReplaceName() have already
happened and thus are not subject to the problem I ran into when ReplaceName()
was called when processing procedure entities.
Note also that the implementation of the "<" operator uses the relative
location in the cooked character stream as the basis of its implementation.
This is potentially problematic when symbols from diffent compilation units
(for example symbols originating in .mod files) are put into the same map since
their names will appear in two different source streams which may not be
allocated in the same relative positions in memory. But I was unable to create
a test that caused a problem. Using a direct comparison of the content of the
name of the symbol in the "<" operator has problems. Symbols in enclosing or
parallel scopes can have the same name. Also using the location of the symbol
in the cooked character stream has the advantage that it preserves the the
order of the symbols in a structure constructor constant, which makes matching
the values with the symbols relatively easy.
This patch supersedes D97749.
Differential Revision: https://reviews.llvm.org/D97774
It's possible to define a procedure whose interface depends on a procedure
which has an interface that depends on the original procedure. Such a circular
definition was causing the compiler to fall into an infinite loop when
resolving the name of the second procedure. It's also possible to create
circular dependency chains of more than two procedures.
I fixed this by adding the function HasCycle() to the class DeclarationVisitor
and calling it from DeclareProcEntity() to detect procedures with such
circularly defined interfaces. I marked the associated symbols of such
procedures by calling SetError() on them. When processing subsequent
procedures, I called HasError() before attempting to analyze their interfaces.
Unfortunately, this did not work.
With help from Tim, we determined that the SymbolSet used to track the
erroneous symbols was instantiated using a "<" operator which was defined using
the location of the name of the procedure. But the location of the procedure
name was being changed by a call to ReplaceName() between the times that the
calls to SetError() and HasError() were made. This caused HasError() to
incorrectly report that a symbol was not in the set of erroneous symbols.
I fixed this by changing SymbolSet to be an unordered set that uses the
contents of the name of the symbol as the basis for its hash function. This
works because the contents of the name of the symbol is preserved by
ReplaceName() even though its location changes.
I also fixed the error message used when reporting recursively defined
dummy procedure arguments by removing extra apostrophes and sorting the
list of symbols.
I also added tests that will crash the compiler without this change.
Note that the "<" operator is used in other contexts, for example, in the map
of characterized procedures, maps of items in equivalence sets, maps of
structure constructor values, ... All of these situations happen after name
resolution has been completed and all calls to ReplaceName() have already
happened and thus are not subject to the problem I ran into when ReplaceName()
was called when processing procedure entities.
Note also that the implementation of the "<" operator uses the relative
location in the cooked character stream as the basis of its implementation.
This is potentially problematic when symbols from diffent compilation units
(for example symbols originating in .mod files) are put into the same map since
their names will appear in two different source streams which may not be
allocated in the same relative positions in memory. But I was unable to create
a test that caused a problem. Using a direct comparison of the content of the
name of the symbol in the "<" operator has problems. Symbols in enclosing or
parallel scopes can have the same name. Also using the location of the symbol
in the cooked character stream has the advantage that it preserves the the
order of the symbols in a structure constructor constant, which makes matching
the values with the symbols relatively easy.
This patch supersedes D97749.
Differential Revision: https://reviews.llvm.org/D97774
It's possible to define a procedure whose interface depends on a procedure
which has an interface that depends on the original procedure. Such a circular
definition was causing the compiler to fall into an infinite loop when
resolving the name of the second procedure. It's also possible to create
circular dependency chains of more than two procedures.
I fixed this by adding the function HasCycle() to the class DeclarationVisitor
and calling it from DeclareProcEntity() to detect procedures with such
circularly defined interfaces. I marked the associated symbols of such
procedures by calling SetError() on them. When processing subsequent
procedures, I called HasError() before attempting to analyze their interfaces.
Unfortunately, this did not work.
With help from Tim, we determined that the SymbolSet used to track the
erroneous symbols was instantiated using a "<" operator which was defined using
the location of the name of the procedure. But the location of the procedure
name was being changed by a call to ReplaceName() between the times that the
calls to SetError() and HasError() were made. This caused HasError() to
incorrectly report that a symbol was not in the set of erroneous symbols.
I fixed this by changing SymbolSet to be an unordered set that uses the
contents of the name of the symbol as the basis for its hash function. This
works because the contents of the name of the symbol is preserved by
ReplaceName() even though its location changes.
I also fixed the error message used when reporting recursively defined dummy
procedure arguments.
I also added tests that will crash the compiler without this change.
Note that the "<" operator is used in other contexts, for example, in the map
of characterized procedures, maps of items in equivalence sets, maps of
structure constructor values, ... All of these situations happen after name
resolution has been completed and all calls to ReplaceName() have already
happened and thus are not subject to the problem I ran into when ReplaceName()
was called when processing procedure entities.
Note also that the implementation of the "<" operator uses the relative
location in the cooked character stream as the basis of its implementation.
This is potentially problematic when symbols from diffent compilation units
(for example symbols originating in .mod files) are put into the same map since
their names will appear in two different source streams which may not be
allocated in the same relative positions in memory. But I was unable to create
a test that caused a problem. Using a direct comparison of the content of the
name of the symbol in the "<" operator has problems. Symbols in enclosing or
parallel scopes can have the same name. Also using the location of the symbol
in the cooked character stream has the advantage that it preserves the the
order of the symbols in a structure constructor constant, which makes matching
the values with the symbols relatively easy.
This change supersedes D97201.
Differential Revision: https://reviews.llvm.org/D97749
Semantic checks for the following OpenMP 4.5 clauses.
1. 2.15.4.2 - Copyprivate clause
2. 2.15.3.4 - Firstprivate clause
3. 2.15.3.5 - Lastprivate clause
Add related test cases and resolve test cases marked as XFAIL.
Reviewed By: kiranchandramohan
Differential Revision: https://reviews.llvm.org/D91920
This reverts commit 07de0846a5.
The original patch has caused 6 out 8 of Flang's public buildbots to
fail. As I'm not sure what the fix should be, I'm reverting this for
now. Please see https://reviews.llvm.org/D97201 for more context and
discussion.
- add ops: rebox, insert_on_range, absent, is_present
- embox, coordinate_of: replace old hand-written parser/pretty-printer with assembly format
- remove dead floating point ops, since buitlins work for all types
- update call op
- update documentation
- misc. NFC to formatting
- add op round trip tests
Authors: Eric Schweitz, Jean Perier, Zachary Selk, Kiran Chandramohan, et.al.
Differential Revision: https://reviews.llvm.org/D97500
It's possible to define a procedure whose interface depends on a procedure
which has an interface that depends on the original procedure. Such a circular
definition was causing the compiler to fall into an infinite loop when
resolving the name of the second procedure. It's also possible to create
circular dependency chains of more than two procedures.
I fixed this by adding the function HasCycle() to the class DeclarationVisitor
and calling it from DeclareProcEntity() to detect procedures with such
circularly defined interfaces. I marked the associated symbols of such
procedures by calling SetError() on them. When processing subsequent
procedures, I called HasError() before attempting to analyze their interfaces.
Unfortunately, this did not work.
With help from Tim, we determined that the SymbolSet used to track the
erroneous symbols was instantiated using a "<" operator which was
defined using the name of the procedure. But the procedure name was
being changed by a call to ReplaceName() between the times that the
calls to SetError() and HasError() were made. This caused HasError() to
incorrectly report that a symbol was not in the set of erroneous
symbols. I fixed this by making SymbolSet be an ordered set, which does
not use the "<" operator.
I also added tests that will crash the compiler without this change.
And I fixed the formatting on an error message from a previous update.
Differential Revision: https://reviews.llvm.org/D97201
We lower expressions with rank > 0 to a set of high-level array operations.
These operations are then analyzed and refined to more primitve
operations in subsequent pass(es).
This patch upstreams these array operations and some other helper ops.
Authors: Eric Schweitz, Rajan Walia, Kiran Chandramohan, et.al.
https://github.com/flang-compiler/f18-llvm-project/pull/565
Differential Revision: https://reviews.llvm.org/D97421
Move the remaing of FIR types to TableGen type definition. This follow suggestion in D96422.
Reviewed By: schweitz, jeanPerier, rriddle
Differential Revision: https://reviews.llvm.org/D96987
- Add a fatal error handler that can print a message with source location
before aborting.
- Update TODO macro to take an mlir location argument and to use the
newly introduced fatal error handler.
- Introduce TODO_NOLOC for the few places where no source location is
easily accessible.
Reviewed By: schweitz
Differential Revision: https://reviews.llvm.org/D97190
`verifyConstructionInvariants` is intended to allow for verifying the invariants of an attribute/type on construction, and `getChecked` is intended to enable more graceful error handling aside from an assert. There are a few problems with the current implementation of these methods:
* `verifyConstructionInvariants` requires an mlir::Location for emitting errors, which is prohibitively costly in the situations that would most likely use them, e.g. the parser.
This creates an unfortunate code duplication between the verifier code and the parser code, given that the parser operates on llvm::SMLoc and it is an undesirable overhead to pre-emptively convert from that to an mlir::Location.
* `getChecked` effectively requires duplicating the definition of the `get` method, creating a quite clunky workflow due to the subtle different in its signature.
This revision aims to talk the above problems by refactoring the implementation to use a callback for error emission. Using a callback allows for deferring the costly part of error emission until it is actually necessary.
Due to the necessary signature change in each instance of these methods, this revision also takes this opportunity to cleanup the definition of these methods by:
* restructuring the signature of `getChecked` such that it can be generated from the same code block as the `get` method.
* renaming `verifyConstructionInvariants` to `verify` to match the naming scheme of the rest of the compiler.
Differential Revision: https://reviews.llvm.org/D97100
This updates the various classes that support the compliation of
Fortran. These classes are shared by the test tools.
Authors: Eric Schweitz, Sameeran Joshi, et.al.
Differential Revision: https://reviews.llvm.org/D97073
Add the following options:
* -fdebug-measure-parse-tree
* -fdebug-pre-fir-tree
Summary of changes:
- Add 2 new frontend actions: DebugMeasureParseTreeAction and DebugPreFIRTreeAction
- Add MeasurementVisitor to FrontendActions.h
- Make reportFatalSemanticErrors return true if there are any fatal errors
- Port most of the `-fdebug-pre-fir-tree` tests to use the new driver if built, otherwise use f18.
Differential Revision: https://reviews.llvm.org/D96884
Most Fortran compilers accept the following benign extension,
and it appears in some applications:
SUBROUTINE FOO(A,N)
IMPLICIT NONE
REAL A(N) ! N is used before being typed
INTEGER N
END
Allow it in f18 only for default integer scalar dummy arguments.
Differential Revesion: https://reviews.llvm.org/D96982
These dependencies were introduced via the `ParseTreeDumper` API in:
* https://reviews.llvm.org/D96716
They manifested themselves in buildbot builders that set
`BUILD_SHARED_LIBS` to `On`.
Add the following options:
* -fdebug-dump-symbols
* -fdebug-dump-parse-tree
* -fdebug-dump-provenance
Summary of changes:
- Add 3 new frontend actions: DebugDumpSymbolsAction, DebugDumpParseTreeAction and DebugDumpProvenanceAction
- Add a unique pointer to the Semantics instance created in PrescanAndSemaAction
- Move fatal semantic error reporting to its own method, FrontendActions#reportFatalSemanticErrors
- Port most tests using `-fdebug-dump-symbols` and `-fdebug-dump-parse-tree` to the new driver if built, otherwise default to f18
Differential Revision: https://reviews.llvm.org/D96716
Fortran 2018 explicitly permits an ignored type declaration
for the result of a generic intrinsic function. See the comment
added to Semantics/expression.cpp for an explanation of why this
is somewhat dangerous and worthy of a warning.
Differential Revision: https://reviews.llvm.org/D96879
The intrinsic procedure table properly classify the various
intrinsics, but the PURE and ELEMENTAL attributes that these
classifications imply don't always make it to the utility
predicates that test symbols for them, leading to spurious
error messages in some contexts. So set those attribute flags
as appropriate in name resolution, using a new function to
isolate the tests.
An alternate solution, in which the predicates would query
the intrinsic procedure table for these attributes on demand,
was something I also tried, so that this information could
come directly from an authoritative source; but it would have
required references to the intrinsic table to be passed along
on too many seemingly unrelated APIs and ended up looking messy.
Several symbol table tests needed to have their expected outputs
augmented with the PURE and ELEMENTAL flags. Some bogus messages
that were flagged as such in test/Semantics/doconcurrent01.f90 were
removed, since they are now correctly not emitted.
Differential Revision: https://reviews.llvm.org/D96878
This patch is a follow up of D96422 and move BoxProcType to TableGen.
Reviewed By: schweitz, mehdi_amini
Differential Revision: https://reviews.llvm.org/D96514
This patch is a follow up of D96422 and move CharacterType and BoxCharType to
TableGen.
Reviewed By: schweitz
Differential Revision: https://reviews.llvm.org/D96446
It's possible to define a procedure that has a procedure dummy argument which
names the procedure that contains it. This was causing the compiler to fall
into an infinite loop when characterizing a call to the procedure.
Following a suggestion from Peter, I fixed this be maintaining a set of
procedure symbols that had already been seen while characterizing a procedure.
This required passing a new parameter to the functions that characterized a
Procedure, a DummyArgument, and a DummyProcedure.
I also added several tests that will crash the compiler without this change.
Differential Revision: https://reviews.llvm.org/D96631
Fix Flang build after addition of a new OpenMP clauses for a clang patch (D76342).
Flang is using TableGen to generation the declaration of clause checks and the new clause
was missing a definiton.
Reviewed By: klausler
Differential Revision: https://reviews.llvm.org/D96808
Add the following options:
* -fimplicit-none and -fno-implicit-none
* -fbackslash and -fno-backslash
* -flogical-abbreviations and -fno-logical-abbreviations
* -fxor-operator and -fno-xor-operator
* -falternative-parameter-statement
* -finput-charset=<value>
Summary of changes:
- Enable extensions in CompilerInvocation#ParseFrontendArgs
- Add encoding_ to Fortran::frontend::FrontendOptions
- Add encoding to Fortran::parser::Options
Differential Revision: https://reviews.llvm.org/D96407
This patch adds the following compiler frontend driver options:
* -fdebug-unparse (f18 spelling: -funparse)
* -fdebug-unparse-with-symbols (f18 spelling: -funparse-with-symbols)
The new driver will only accept the new spelling. `f18` will accept both
the original and the new spelling.
A new base class for frontend actions is added: `PrescanAndSemaAction`.
This is added to reduce code duplication that otherwise these new
options would lead to. Implementation from
* `ParseSyntaxOnlyAction::ExecutionAction`
is moved to:
* `PrescanAndSemaAction::BeginSourceFileAction`
This implementation is now shared between:
* PrescanAndSemaAction
* ParseSyntaxOnlyAction
* DebugUnparseAction
* DebugUnparseWithSymbolsAction
All tests that don't require other yet unimplemented options are
updated. This way `flang-new -fc1` is used instead of `f18` when
`FLANG_BUILD_NEW_DRIVER` is set to `On`. In order to facilitate this,
`%flang_fc1` is added in the LIT configuration (lit.cfg.py).
`asFortran` from f18.cpp is duplicated as `getBasicAsFortran` in
FrontendOptions.cpp. At this stage it's hard to find a good place to
share this method. I suggest that we revisit this once a switch from
`f18` to `flang-new` is complete.
Differential Revision: https://reviews.llvm.org/D96483
Implementation of Do loop iteration variable check, Do while loop check, Do loop cycle restrictions.
Also to check whether the ordered clause is present on the loop construct if any ordered region ever
binds to a loop region arising from the loop construct.
Files:
check-omp-structure.h
check-omp-structure.cpp
resolve-directives.cpp
Testcases:
omp-do06-positivecases.f90
omp-do06.f90
omp-do08.f90
omp-do09.f90
omp-do10.f90
omp-do11.f90
omp-do12.f90
omp-do13.f90
omp-do14.f90
omp-do15.f90
omp-do16.f90
omp-do17.f90
Reviewed by: Kiran Chandramohan @kiranchandramohan , Valentin Clement @clementval
Differential Revision: https://reviews.llvm.org/D92732
This patch is a follow up of D96422 and move ComplexType to TableGen.
Reviewed By: schweitz, mehdi_amini
Differential Revision: https://reviews.llvm.org/D96610
Avoid spurious and confusing macro replacements from things like
-DPIC on Fortran source files whose suffixes indicate that preprocessing
is not expected.
Add gfortran-like "-cpp" and "-nocpp" flags to f18 to force predefinition
of macros independent of the source file suffix.
Differential Revision: https://reviews.llvm.org/D96464
The kind mapper provides a portable mechanism to map Fortran type KIND values
independent of the front-end to their corresponding MLIR and LLVM types.
Differential Revision: https://reviews.llvm.org/D96362
Instead of using a message attachment with further details,
emit the details as part of a single message.
Differential Revision: https://reviews.llvm.org/D96465
Most components required for this are already there.
Build and Testing clean.
ninja check-flang
Reviewed By: clementval, tskeith
Differential Revision: https://reviews.llvm.org/D96411
This patch just addresses one of the outstanding TODOs. More
specifically, it moves all the outstanding standard macro predefinitions
from `SetDefaultFortranOpts` to `setDefaultPredefinitions`. This
dedicated method for standard macro predefs was introduced in:
* https://reviews.llvm.org/D96032
This patch is a follow up of D96422 and move the ShapeShiftType to
TableGen.
Reviewed By: mehdi_amini
Differential Revision: https://reviews.llvm.org/D96442
When accessing a specific procedure of a USE-associated generic
interface, we need to allow for the case in which that specific
procedure has the same name as the generic when testing for
its availability in the current scope.
Differential Revision: https://reviews.llvm.org/D96467
Some state in name resolution is stored in the DeclarationVisitor
instance and processed at the end of the specification part.
This state needs to accommodate nested specification parts, namely
the ones that can be nested in a subroutine or function interface
body.
Differential Revision: https://reviews.llvm.org/D96466
This is the first patch of a serie to move FIR types to TableGen format as suggested in D96172.
This patch is setting up the files for FIR types and move the ShapeType to TableGen.
As discussed with @schweitz, I'm taking over this task to help the FIR upstreaming effort.
Reviewed By: mehdi_amini
Differential Revision: https://reviews.llvm.org/D96422
Add support for the following options:
* -fopenmp
* -fopenacc
Update OpenMP and OpenACC semantics tests to use the new driver if it is built, otherwise use f18.
OpenMP tests that include `use omp_lib` or run `test_symbols.sh` have not been updated as they require options `-intrinsic-module-directory` and `-funparse-with-symbols` which are currently not implemented in the new driver.
Similarly OpenACC tests that run `test_symbols.sh` have not been updated.
This patch also moves semanticsContext to CompilerInvocation and creates it in CompilerInvocation#setSemanticsOpts so that the semantics context can use Fortran::parser::Options#features.
Summary of changes:
- Move semanticsContext to CompilerInvocation.h
- Update OpenMP and OpenACC semantics tests that do not rely on `-intrinsic-module-directory` and `-funparse-with-symbols` to use %flang
Differential Revision: https://reviews.llvm.org/D96032
This reverts commit 511dd4f438 along with
a couple fixes.
Original message:
Now the context is the first, rather than the last input.
This better matches the rest of the infrastructure and makes
it easier to move these types to being declaratively specified.
Phabricator: https://reviews.llvm.org/D96111
Now the context is the first, rather than the last input.
This better matches the rest of the infrastructure and makes
it easier to move these types to being declaratively specified.
Differential Revision: https://reviews.llvm.org/D96111
This patch adds logic in the InputOutputTestAction frontend action for
reading input from stdin. Without this patch the following fails:
```
flang-new -fc1 -test-io -
```
The implementation of `InputOutputTestAction` is cleaned-up and a test
for reading from stdin is added.
Note that there's a difference between `-test-io` and e.g. `-E` in terms
of file I/O. The frontend action for the former handles all file I/O on
it's own. Conversely, the action corresponding to -E relies on the
prescanner API to handle this.
Currently we can't test reading from stdin for `flang-new -`. In this
case `libclangDriver` assumes `-x -c`. This in turn leads to `flang-new
-cc1`, which is not supported.
Add support for option -J/-module-dir in the new Flang driver. This
will allow for including module files in other directories, as the
default search path is currently the working folder. This also provides
an option of storing the output module in the specified folder.
Differential Revision: https://reviews.llvm.org/D95448
This new action encapsulates all actions that require the prescanner to
be run before proceeding with other processing. By adding this new
action, we are better equipped to control which actions _do_ run the
prescanner and which _do not_.
The following actions that require the prescanner are refactored to
inherit from `PrescanAction`:
* `PrintPreprocessedAction`
* `ParseSyntaxOnlyAction` .
New virtual method is introduced to facilitate all this:
* `BeginSourceFileAction`
Like in Clang, this method is run inside `BeginSourceFile`. In other
words, it is invoked before `ExecuteAction` for the corresponding
frontend action is run. This method allows us to:
* carry out any processing that is always required by the action (e.g.
run the prescanner)
* fine tune the settings/options on a file-by-file basis (e.g. to
decide between fixed-form and free-form based on file extension)
This patch implements non-functional-changes.
Reviewed By: FarisRehman
Differential Revision: https://reviews.llvm.org/D95464
Add support for the following layout options:
* -ffree-form
* -ffixed-form
- -ffixed-line-length=n (alias -ffixed-line-length-n)
Additionally remove options `-fno-free-form` and `-fno-fixed-form` as they were initially added to forward to gfortran but gfortran does not support these flags.
This patch adds the flag FlangOnlyOption to the existing options `-ffixed-form`, `-ffree-form` and `-ffree-line-length-` in Options.td. As of commit 6a75496836, these flags are not currently forwarded to gfortran anyway.
The default fixed line length in FrontendOptions is 72, based off the current default in Fortran::parser::Options. The line length cannot be set to a negative integer, or a positive integer less than 7 excluding 0, consistent with the behaviour of gfortran.
This patch does not add `-ffree-line-length-n` as Fortran::parser::Options does not have a variable for free form columns.
Whilst the `fixedFormColumns` variable is used in f18 for `-ffree-line-length-n`, f18 only allows `-ffree-line-length-none`/`-ffree-line-length-0` and not a user-specified value. `fixedFormcolumns` cannot be used in the new driver as it is ignored in the frontend when dealing with free form files.
Summary of changes:
- Remove -fno-fixed-form and -fno-free-form from Options.td
- Make -ffixed-form, -ffree-form and -ffree-line-length-n FlangOnlyOption in Options.td
- Create AddFortranDialectOptions method in Flang.cpp
- Create FortranForm enum in FrontendOptions.h
- Add fortranForm_ and fixedFormColumns_ to Fortran::frontend::FrontendOptions
- Update fixed-form-test.f so that it guarantees that it fails when forced as a free form file to better facilitate testing.
Differential Revision: https://reviews.llvm.org/D95460
Constant folding for calls to LBOUND() was not working when the lower bound of
a constant array was not 1.
I fixed this and re-enabled the test in Evaluate/folding16.f90 that previously
was silently failing. I slightly changed the test to parenthesize the first
argument to exercise all of the new code.
Differential Revision: https://reviews.llvm.org/D95894
Peter Steinfeld