In type inference, an empty type set for a specific hw mode is not an
error. In earlier stages of the design it was, but having to use non-
parameterized types with target intrinsics necessarily led to type
contradictions: since the intrinsics used specific types, they were
only valid for a specific hw mode, and the resulting type set for other
modes ended up empty. To accommodate the existence of such intrinsics
individual type sets were allowed to be empty as long as not all sets
were empty.
llvm-svn: 315858
Summary:
There is an important mismatch between ISD::LOAD and G_LOAD (and likewise for
ISD::STORE and G_STORE). In SelectionDAG, ISD::LOAD is a non-atomic load
and atomic loads are handled by a separate node. However, this is not true of
GlobalISel's G_LOAD. For G_LOAD, the MachineMemOperand indicates the atomicity
of the operation. As a result, this mapping must also add a predicate that
checks for non-atomic MachineMemOperands.
This is NFC since these nodes always have predicates in practice and are
therefore always rejected at the moment.
Depends on D37443
Reviewers: ab, qcolombet, t.p.northover, rovka, aditya_nandakumar
Reviewed By: qcolombet
Subscribers: kristof.beyls, llvm-commits, igorb
Differential Revision: https://reviews.llvm.org/D37445
llvm-svn: 315843
Summary:
GlobalISel and SelectionDAG require different code for the common
load/store predicates due to differences in the representation.
For example:
SelectionDAG: (load<signext,i8>:i32 GPR32:$addr) // The <> denote properties of the SDNode that are not printed in the DAG
GlobalISel: (G_SEXT:s32 (G_LOAD:s8 GPR32:$addr))
Even without that, differences in the IR (SDNode vs MachineInstr) require
differences in the C++ predicate.
This patch moves the implementation of the common load/store predicates
into tablegen so that it can handle these differences.
It's NFC for SelectionDAG since it emits equivalent code and it's NFC for
GlobalISel since the rules involving the relevant predicates are still
rejected by the importer.
Depends on D36618
Reviewers: ab, qcolombet, t.p.northover, rovka, aditya_nandakumar
Subscribers: llvm-commits, igorb
Differential Revision: https://reviews.llvm.org/D37443
Includes a partial revert of r315826 since this patch makes it necessary for
getPredCode() to return a std::string and getImmCode() should have the same
interface as getPredCode().
llvm-svn: 315841
Summary:
Operand variable lookups are now performed by the RuleMatcher rather than
searching the whole matcher hierarchy for a match. This revealed a wrong-code
bug that currently affects ARM and X86 where patterns that use a variable more
than once in the match pattern will be imported but won't check that the
operands are identical. This can cause the tablegen-erated matcher to
accept matches that should be rejected.
Depends on D36569
Reviewers: ab, t.p.northover, qcolombet, rovka, aditya_nandakumar
Subscribers: aemerson, igorb, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D36618
llvm-svn: 315780
Summary:
There's only a tablegen testcase for IntImmLeaf and not a CodeGen one
because the relevant rules are rejected for other reasons at the moment.
On AArch64, it's because there's an SDNodeXForm attached to the operand.
On X86, it's because the rule either emits multiple instructions or has
another predicate using PatFrag which cannot easily be supported at the
same time.
Reviewers: ab, t.p.northover, qcolombet, rovka, aditya_nandakumar
Reviewed By: qcolombet
Subscribers: aemerson, javed.absar, igorb, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D36569
llvm-svn: 315761
Summary:
The purpose of this patch is to expose more information about ImmLeaf-like
PatLeaf's so that GlobalISel can learn to import them. Previously, ImmLeaf
could only be used to test int64_t's produced by sign-extending an APInt.
Other tests on immediates had to use the generic PatLeaf and extract the
constant using C++.
With this patch, tablegen will know how to generate predicates for APInt,
and APFloat. This will allow it to 'do the right thing' for both SelectionDAG
and GlobalISel which require different methods of extracting the immediate
from the IR.
This is NFC for SelectionDAG since the new code is equivalent to the
previous code. It's also NFC for FastISel because FastIselShouldIgnore is 1
for the ImmLeaf subclasses. Enabling FastIselShouldIgnore == 0 for these new
subclasses will require a significant re-factor of FastISel.
For GlobalISel, it's currently NFC because the relevant code to import the
affected rules is not yet present. This will be added in a later patch.
Depends on D36086
Reviewers: ab, t.p.northover, qcolombet, rovka, aditya_nandakumar
Reviewed By: qcolombet
Subscribers: bjope, aemerson, rengolin, javed.absar, igorb, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D36534
llvm-svn: 315747
I'm about to commit a patch that makes them necessary for getPredCode() and
it would be strange for getPredCode() and getImmCode() to require different
usage.
llvm-svn: 315733
Summary:
Add LLVM_FORCE_ENABLE_DUMP cmake option, and use it along with
LLVM_ENABLE_ASSERTIONS to set LLVM_ENABLE_DUMP.
Remove NDEBUG and only use LLVM_ENABLE_DUMP to enable dump methods.
Move definition of LLVM_ENABLE_DUMP from config.h to llvm-config.h so
it'll be picked up by public headers.
Differential Revision: https://reviews.llvm.org/D38406
llvm-svn: 315590
This reverts commit 4e4ee1c507e2707bb3c208e1e1b6551c3015cbf5.
This is failing due to some code that isn't built on MSVC
so I didn't catch. Not immediately obvious how to fix this
at first glance, so I'm reverting for now.
llvm-svn: 315536
There's a lot of misuse of Twine scattered around LLVM. This
ranges in severity from benign (returning a Twine from a function
by value that is just a string literal) to pretty sketchy (storing
a Twine by value in a class). While there are some uses for
copying Twines, most of the very compelling ones are confined
to the Twine class implementation itself, and other uses are
either dubious or easily worked around.
This patch makes Twine's copy constructor private, and fixes up
all callsites.
Differential Revision: https://reviews.llvm.org/D38767
llvm-svn: 315530
This adds debug tracing to the table-generated assembly instruction matcher,
enabled by the -debug-only=asm-matcher option.
The changes in the target AsmParsers are to add an MCInstrInfo reference under
a consistent name, so that we can use it from table-generated code. This was
already being used this way for targets that use deprecation warnings, but 5
targets did not have it, and Hexagon had it under a different name to the other
backends.
llvm-svn: 315445
This allows a DiagnosticType and/or DiagnosticString to be associated
with a RegisterClass in tablegen, so that we can emit diagnostics in the
assembler when a register operand is incorrect.
DiagnosticType creates a predictable enum value, which gets returned as
the error code when an operand does not match, and can be used by the
assembly parser to map to a user-facing diagnostic. DiagnosticString
creates an anonymous enum value (currently based on the tablegen class
name), and a function to map from enum values to strings will be
generated. Both of these work the same was as they do for AsmOperand.
This isn't used by any targets yet, but has one (positive) side-effect.
It improves the diagnostic codes returned by validateOperandClass - we
always want to emit the diagnostic that relates to the expected operand
class, but this wasn't always being done when the expected and actual
classes were completely different (token/register/custom). This causes a
few AArch64 diagnostics to be improved, as Match_InvalidOperand was
being returned instead of a specific diagnostic type.
Differential revision: https://reviews.llvm.org/D36691
llvm-svn: 315295
It's rare but there are a small number of patterns like this:
(set i64:$dst, (add i64:$src1, i64:$src2))
These should be equivalent to register classes except they shouldn't check for
a specific register bank.
This doesn't occur in AArch64/ARM/X86 but does occasionally come up in other
in-tree targets such as BPF.
llvm-svn: 315226
After the original commit ([[ https://reviews.llvm.org/rL304088 | rL304088 ]]) was reverted, a discussion in llvm-dev was opened on 'how to accomplish this task'.
In the discussion we concluded that the best way to achieve our goal (which is to automate the folding tables and remove the manually maintained tables) is:
# Commit the tablegen backend disabled by default.
# Proceed with an incremental updating of the manual tables - while checking the validity of each added entry.
# Repeat previous step until we reach a state where the generated and the manual tables are identical. Then we can safely remove the manual tables and include the generated tables instead.
# Schedule periodical (1 week/2 weeks/1 month) runs of the pass:
- if changes appear (new entries):
- make sure the entries are legal
- If they are not, mark them as illegal to folding
- Commit the changes (if there are any).
CMake flag added for this purpose is "X86_GEN_FOLD_TABLES". Building with this flags will run the pass and emit the X86GenFoldTables.inc file under build/lib/Target/X86/ directory which is a good reference for any developer who wants to take part in the effort of completing the current folding tables.
Differential Revision: https://reviews.llvm.org/D38028
llvm-svn: 315173
The assertion tests were using count() instead of testing the find result, resulting in double the number of searches in debug/assert builds.
Instead, call find once (like the release builds do) and assert the result against end().
llvm-svn: 315151
Avoid unnecessary std::string creations in the TreePredicateFn getters and in CodeGenDAGPatterns::getSDNodeNamed
Differential Revision: https://reviews.llvm.org/D38624
llvm-svn: 315148
This adds a DiagnosticString member to the AsmOperand tablegen class, so
that the diagnostic text to be used when an assembly operand is
incorrect can be stored in the tablegen description of the operand,
rather than in a separate switch statement in the AsmParser.
If DiagnosticString is used for any operands, tablegen will emit a
getMatchKindDiag function, to map from diagnostic enums to strings.
Differential revision: https://reviews.llvm.org/D31606
llvm-svn: 314803
The current table-generated assembly instruction matcher returns a
64-bit error code when matching fails. Since multiple instruction
encodings with the same mnemonic can fail for different reasons, it uses
some heuristics to decide which message is important.
This heuristic does not work well for targets that have many encodings
with the same mnemonic but different operands, or which have different
versions of instructions controlled by subtarget features, as it is hard
to know which encoding the user was intending to use.
Instead of trying to improve the heuristic in the table-generated
matcher, this patch changes it to report a list of near-miss encodings.
This list contains an entry for each encoding with the correct mnemonic,
but with exactly one thing preventing it from being valid. This thing
could be a single invalid operand, a missing target feature or a failed
target-specific validation function.
The target-specific assembly parser can then report an error message
giving multiple options for instruction variants that the user may have
been trying to use. For example, I am working on a patch to use this for
ARM, which can give this error for an invalid instruction for ARMv6-M:
<stdin>:8:3: error: invalid instruction, multiple near-miss encodings found
adds r0, r1, #0x8
^
<stdin>:8:3: note: for one encoding: instruction requires: thumb2
adds r0, r1, #0x8
^
<stdin>:8:16: note: for one encoding: expected an integer in range [0, 7]
adds r0, r1, #0x8
^
<stdin>:8:16: note: for one encoding: expected a register in range [r0, r7]
adds r0, r1, #0x8
^
This also allows the target-specific assembly parser to apply its own
heuristics to suppress some errors. For example, the error "instruction
requires: arm-mode" is never going to be useful when targeting an
M-profile architecture (which does not have ARM mode).
This patch just adds the target-independent mechanism for doing this,
all targets still use the old mechanism. I've added a bit in the
AsmParser tablegen class to allow targets to switch to this new
mechanism. To use this, the target-specific assembly parser will have to
be modified for the change in signature of MatchInstructionImpl, and to
report errors based on the list of near-misses.
Differential revision: https://reviews.llvm.org/D27620
llvm-svn: 314774
Also add operator<< for use with raw_ostream to InfoByHwMode and its
derived classes.
Recommitting r313989 with the fix for unresolved references: explicitly
define the operator<< in namespace llvm.
llvm-svn: 314004
Avoid unnecessary std::string creations during TypeSetByHwMode::writeToStream.
Found during investigations into PR28222
Differential Revision: https://reviews.llvm.org/D38174
llvm-svn: 313983
This changes some STL data types to corresponding LLVM
data types that have better performance characteristics.
Differential Revision: https://reviews.llvm.org/D37957
llvm-svn: 313783
The generated DAG isel file currently makes use of formatted_raw_ostream primarily for generating a hierarchical representation while also skipping over the initial comment that contains the current index.
It was reported in D37957 that this formatting might be slow due to the need to keep track of column numbers by monitoring all the written data for new lines.
This patch attempts to rewrite the emitter to make use of simpler formatting mechanisms to generate a fairly similar output. The main difference is that the number in the index comment is now right justified and padded with spaces inside the comment. Previously we appended the spaces after the comment.
Differential Revision: https://reviews.llvm.org/D37966
llvm-svn: 313674
Add some member types to MachineValueTypeSet::const_iterator so that
iterator_traits can work with it.
Improve TableGen performance of -gen-dag-isel (motivated by X86 backend)
The introduction of parameterized register classes in r313271 caused the
matcher generation code in TableGen to run much slower, particularly so
in the unoptimized (debug) build. This patch recovers some of the lost
performance.
Summary of changes:
- Cache the set of legal types in TypeInfer::getLegalTypes. The contents
of this set do not change.
- Add LLVM_ATTRIBUTE_ALWAYS_INLINE to several small functions. Normally
this would not be necessary, but in the debug build TableGen is not
optimized, so this helps a little bit.
- Add an early exit from TypeSetByHwMode::operator== for the case when
one or both arguments are "simple", i.e. only have one mode. This
saves some time in GenerateVariants.
- Finally, replace the underlying storage type in TypeSetByHwMode::SetType
with MachineValueTypeSet based on std::array instead of std::set.
This significantly reduces the number of memory allocation calls.
I've done a number of experiments with the underlying type of InfoByHwMode.
The type is a map, and for targets that do not use the parameterization,
this map has only one entry. The best (unoptimized) performance, somewhat
surprisingly came from std::map, followed closely by std::unordered_map.
DenseMap was the slowest by a large margin.
Various hand-crafted solutions (emulating enough of the map interface
not to make sweeping changes to the users) did not yield any observable
improvements.
llvm-svn: 313660
The introduction of parameterized register classes in r313271 caused the
matcher generation code in TableGen to run much slower, particularly so
in the unoptimized (debug) build. This patch recovers some of the lost
performance.
Summary of changes:
- Cache the set of legal types in TypeInfer::getLegalTypes. The contents
of this set do not change.
- Add LLVM_ATTRIBUTE_ALWAYS_INLINE to several small functions. Normally
this would not be necessary, but in the debug build TableGen is not
optimized, so this helps a little bit.
- Add an early exit from TypeSetByHwMode::operator== for the case when
one or both arguments are "simple", i.e. only have one mode. This
saves some time in GenerateVariants.
- Finally, replace the underlying storage type in TypeSetByHwMode::SetType
with MachineValueTypeSet based on std::array instead of std::set.
This significantly reduces the number of memory allocation calls.
I've done a number of experiments with the underlying type of InfoByHwMode.
The type is a map, and for targets that do not use the parameterization,
this map has only one entry. The best (unoptimized) performance, somewhat
surprisingly came from std::map, followed closely by std::unordered_map.
DenseMap was the slowest by a large margin.
Various hand-crafted solutions (emulating enough of the map interface
not to make sweeping changes to the users) did not yield any observable
improvements.
llvm-svn: 313647
These are removed in C++17. We still have some users of
unary_function::argument_type, so just spell that typedef out. No
functionality change intended.
Note that many of the argument types are actually wrong :)
llvm-svn: 313287
This replaces TableGen's type inference to operate on parameterized
types instead of MVTs, and as a consequence, some interfaces have
changed:
- Uses of MVTs are replaced by ValueTypeByHwMode.
- EEVT::TypeSet is replaced by TypeSetByHwMode.
This affects the way that types and type sets are printed, and the
tests relying on that have been updated.
There are certain users of the inferred types outside of TableGen
itself, namely FastISel and GlobalISel. For those users, the way
that the types are accessed have changed. For typical scenarios,
these replacements can be used:
- TreePatternNode::getType(ResNo) -> getSimpleType(ResNo)
- TreePatternNode::hasTypeSet(ResNo) -> hasConcreteType(ResNo)
- TypeSet::isConcrete -> TypeSetByHwMode::isValueTypeByHwMode(false)
For more information, please refer to the review page.
Differential Revision: https://reviews.llvm.org/D31951
llvm-svn: 313271
Summary:
Since asan is linked dynamically on Darwin, the weak interface symbol
is removed by -Wl,-dead_strip.
Reviewers: kcc, compnerd, aaron.ballman
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D37636
llvm-svn: 312914
Summary:
Tablegen already supports commutable instrinsics with more than 2 operands. There it just assumes the first two operands are commutable.
I plan to use this to improve the generation of FMA patterns in the X86 backend.
Reviewers: aymanmus, zvi, RKSimon, spatel, arsenm
Reviewed By: arsenm
Subscribers: arsenm, llvm-commits
Differential Revision: https://reviews.llvm.org/D37430
llvm-svn: 312464
Summary:
Add support for autocompleting values of -std= by including
LangStandards.def. This patch relies on D36782, and is using two-stage
code generation.
Reviewers: v.g.vassilev, teemperor, ruiu
Subscribers: cfe-commits
Differential Revision: https://reviews.llvm.org/D36820
llvm-svn: 311971
This reverts commit 7c46b80c022e18d43c1fdafb117b0c409c5a6d1e.
r311552 broke lld buildbot because I've changed OptionInfos type from
ArrayRef to vector. However the bug is fixed, so I'll commit this again.
llvm-svn: 311958
This fixes 2 problems in subregister hierarchies with multiple levels
and tuples:
1) For bigger tuples computing secondary subregs would miss 2nd order
effects. In the test case a register like `S10_S11_S12_S13_S14` with D5
= S10_S11, D6 = S12_S13 we would correctly compute sub0 = D5, sub1 = D6
but would miss the fact that we could now form ssub0_ssub1_ssub2_ssub3
(aka sub0_sub1) = D5_D6. This is fixed by changing
computeSecondarySubRegs() to compute a fixpoint.
2) Fixing 1) exposed a problem where TableGen would create multiple
names for effectively the same subregister index. In the test case
the subregister index sub0 is composed from ssub0 and ssub1, and sub1 is
composed from ssub2 and ssub3. TableGen should not create both sub0_sub1
and ssub0_ssub1_ssub2_ssub3 as infered subregister indexes. This changes
the code to build a transitive closure of the subregister components
before forming new concatenated subregister indexes.
This fix was developed for an out of tree target. For the in-tree
targets the only change is in the register information computed for ARM.
There is a slight chance this fixed/improved some register coalescing
around the QQQQ/QQ register classes there but I couldn't see/provoke any
code generation differences.
Differential Revision: https://reviews.llvm.org/D36913
llvm-svn: 311914
Adds a new --gen-register-info-debug-dump mode to tablegen that dumps various register related information:
- List of register classes with super and subclasses
- List of subregister indexes with lanemasks
- List of registers with subregisters
I will use this in an upcoming commit to create a test.
It may also be useful for target developers wanting to get an overview
of all the register related information, esp. the things inferred by
tablegen and not directly visible in the .td file.
Differential Revision: https://reviews.llvm.org/D36911
llvm-svn: 311913
This fixes a warning when there are zero defined predicates and also fixes an
unnoticed bug where the first predicate in the table was unusable.
llvm-svn: 311684
Summary:
This patch adds support for predicates on imm nodes but only for ImmLeaf and not
for PatLeaf or PatFrag and only where the value does not need to be transformed
before being rendered into the instruction.
The limitation on PatLeaf/PatFrag/SDNodeXForm is due to differences in the
necessary target-supplied C++ for GlobalISel.
Depends on D36085
The previous commit was reverted for breaking the build but this appears to have
been the recurring problem on the Windows bots with tablegen not being re-run
when llvm-tblgen is changed but the .td's aren't. If it re-occurs then forcing a
build with clean=True should fix it but this string should do this in advance:
Requires a clean build.
Reviewers: ab, t.p.northover, qcolombet, rovka, aditya_nandakumar
Reviewed By: rovka
Subscribers: kristof.beyls, javed.absar, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D36086
llvm-svn: 311645
Summary:
This is a patch for clang autocomplete feature.
It will collect values which -analyzer-checker takes, which is defined in
clang/StaticAnalyzer/Checkers/Checkers.inc, dynamically.
First, from ValuesCode class in Options.td, TableGen will generate C++
code in Options.inc. Options.inc will be included in DriverOptions.cpp, and
calls OptTable's addValues function. addValues function will add second
argument to Option's Values class. Values contains string like "foo,bar,.."
which is handed to Values class
in OptTable.
Reviewers: v.g.vassilev, teemperor, ruiu
Subscribers: hiraditya, cfe-commits
Differential Revision: https://reviews.llvm.org/D36782
llvm-svn: 311552
Summary:
This patch adds support for predicates on imm nodes but only for ImmLeaf and not for PatLeaf or PatFrag and only where the value does not need to be transformed before being rendered into the instruction.
The limitation on PatLeaf/PatFrag/SDNodeXForm is due to differences in the necessary target-supplied C++ for GlobalISel.
Depends on D36085
Reviewers: ab, t.p.northover, qcolombet, rovka, aditya_nandakumar
Reviewed By: rovka
Subscribers: kristof.beyls, javed.absar, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D36086
llvm-svn: 311546
Summary:
Generate the type table from the types used by a target rather than hard-coding
the union of types used by all targets.
Depends on D36084
Reviewers: ab, t.p.northover, qcolombet, rovka, aditya_nandakumar
Reviewed By: rovka
Subscribers: kristof.beyls, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D36085
llvm-svn: 311084
Summary:
Support the case where an operand of a pattern is also the whole of the
result pattern. In this case the original result and all its uses must be
replaced by the operand. However, register class restrictions can require
a COPY. This patch handles both cases by always emitting the copy and
leaving it for the register allocator to optimize.
The previous commit failed on Windows machines due to a flaw in the sort
predicate which allowed both A < B < C and B == C to be satisfied
simultaneously. The cause of this was some sloppiness in the priority order of
G_CONSTANT instructions compared to other instructions. These had equal priority
because it makes no difference, however there were operands had higher priority
than G_CONSTANT but lower priority than any other instruction. As a result, a
priority order between G_CONSTANT and other instructions must be enforced to
ensure the predicate defines a strict weak order.
Reviewers: ab, t.p.northover, qcolombet, rovka, aditya_nandakumar
Subscribers: javed.absar, kristof.beyls, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D36084
llvm-svn: 311076
As expected, this failed on the windows bots but the instrumentation showed
something interesting. The ADD8ri and INC8r rules are never directly compared
on the windows machines. That implies that the issue lies in transitivity of
the Compare predicate. I believe I've already verified that but maybe I missed
something.
llvm-svn: 310922
Summary:
Support the case where an operand of a pattern is also the whole of the
result pattern. In this case the original result and all its uses must be
replaced by the operand. However, register class restrictions can require
a COPY. This patch handles both cases by always emitting the copy and
leaving it for the register allocator to optimize.
The previous commit failed on the windows bots and this one is likely to fail
on those same bots. However, the added instrumentation should reveal a particular
isHigherPriorityThan() evaluation which I'm expecting to expose that
these machines are weighing priority of two rules differently from the
non-windows machines.
Reviewers: ab, t.p.northover, qcolombet, rovka, aditya_nandakumar
Subscribers: javed.absar, kristof.beyls, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D36084
llvm-svn: 310919
Two of the Windows bots are failing test\CodeGen\X86\GlobalISel\select-inc.mir
which should not have been affected by the change. Reverting while I investigate.
Also reverted r310735 because it builds on r310716.
llvm-svn: 310745
Summary:
Generate the type table from the types used by a target rather than hard-coding
the union of types used by all targets.
Depends on D36084
Reviewers: ab, t.p.northover, qcolombet, rovka, aditya_nandakumar
Reviewed By: rovka
Subscribers: kristof.beyls, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D36085
llvm-svn: 310735
Summary:
Support the case where an operand of a pattern is also the whole of the
result pattern. In this case the original result and all its uses must be
replaced by the operand. However, register class restrictions can require
a COPY. This patch handles both cases by always emitting the copy and
leaving it for the register allocator to optimize.
Depends on D35833
Reviewers: ab, t.p.northover, qcolombet, rovka, aditya_nandakumar
Subscribers: javed.absar, kristof.beyls, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D36084
llvm-svn: 310716
Summary:
This patch enables the import of rules containing 'imm' operands that do not
constrain the acceptable values using predicates. Support for ImmLeaf will
arrive in a later patch.
Depends on D35681
Reviewers: ab, t.p.northover, qcolombet, rovka, aditya_nandakumar
Reviewed By: rovka
Subscribers: kristof.beyls, javed.absar, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D35833
llvm-svn: 310343
Relanding after fixing UB issue with DefaultOffsets.
Consider the following instruction: "inst.eq $dst, $src" where ".eq"
is an optional flag operand. The $src and $dst operands are
registers. If we parse the instruction "inst r0, r1", the flag is not
present and it will be marked in the "OptionalOperandsMask" variable.
After the matching is complete we call the "convertToMCInst" method.
The current implementation works only if the optional operands are at
the end of the array. The "Operands" array looks like [token:"inst",
reg:r0, reg:r1]. The first operand that must be added to the MCInst
is the destination, the r0 register. The "OpIdx" (in the Operands
array) for this register is 2. However, since the flag is not present
in the Operands, the actual index for r0 should be 1. The flag is not
present since we rely on the default value.
This patch removes the "NumDefaults" variable and replaces it with an
array (DefaultsOffset). This array contains an index for each operand
(excluding the mnemonic). At each index, the array contains the
number of optional operands that should be subtracted. For the
previous example, this array looks like this: [0, 1, 1]. When we need
to access the r0 register, we compute its index as 2 -
DefaultsOffset[1] = 1.
Patch by Alexandru Guduleasa!
Reviewers: SamWot, nhaustov, niravd
Reviewed By: niravd
Subscribers: vitalybuka, llvm-commits
Differential Revision: https://reviews.llvm.org/D35998
llvm-svn: 310254
Consider the following instruction: "inst.eq $dst, $src" where ".eq"
is an optional flag operand. The $src and $dst operands are
registers. If we parse the instruction "inst r0, r1", the flag is not
present and it will be marked in the "OptionalOperandsMask" variable.
After the matching is complete we call the "convertToMCInst" method.
The current implementation works only if the optional operands are at
the end of the array. The "Operands" array looks like [token:"inst",
reg:r0, reg:r1]. The first operand that must be added to the MCInst
is the destination, the r0 register. The "OpIdx" (in the Operands
array) for this register is 2. However, since the flag is not present
in the Operands, the actual index for r0 should be 1. The flag is not
present since we rely on the default value.
This patch removes the "NumDefaults" variable and replaces it with an
array (DefaultsOffset). This array contains an index for each operand
(excluding the mnemonic). At each index, the array contains the
number of optional operands that should be subtracted. For the
previous example, this array looks like this: [0, 1, 1]. When we need
to access the r0 register, we compute its index as 2 -
DefaultsOffset[1] = 1.
Patch by Alexandru Guduleasa!
Reviewers: SamWot, nhaustov, niravd
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D35998
llvm-svn: 309949
Summary:
We only need to merge memory operands for instructions that access
memory. This slightly reduces the number of actions executed.
Reviewers: MatzeB, rovka, dsanders
Reviewed By: dsanders
Subscribers: aemerson, igorb, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D36151
llvm-svn: 309944
Summary:
Fix a bug discovered in an out-of-tree target where memoperands from
pseudo-instructions that weren't part of the match were being merged into the
result instructions as part of GIR_MergeMemOperands.
This bug was caused by a change to the handling of State.MIs between rules when
the state machine tables were fused into a single table. Previously, each rule
would reset State.MIs using State.MIs.resize(1) but this is no longer done, as a
result stale data is occasionally left in some elements of State.MIs. Most
opcodes aren't affected by this but GIR_MergeMemOperands merges all memoperands
from the intructions recorded in State.MIs into the result instruction.
Suppose for example, we processed but rejected the following pattern:
(signextend (load x))
at this point, State.MIs contains the signextend and the load. Now suppose we
process and accept this pattern:
(add x, y)
at this point, State.MIs contains the add as well as the (now irrelevant) load.
When GIR_MergeMemOperands is processed, the memoperands from that irrelevant
load will be merged into the result instruction even though it was not part of
the match.
Bringing back the State.MIs.resize(1) would fix the problem but it would limit
our ability to optimize the table in the future. Instead, this patch fixes the
problem by explicitly stating which instructions should be merged into the result.
There's no direct test case in this commit because a test case would be very brittle.
However, at the time of writing this should fix the failures in
http://green.lab.llvm.org/green/job/Compiler_Verifiers_GlobalISEL/ as well as a
failure in test/CodeGen/ARM/GlobalISel/arm-isel.ll when expensive checks are enabled.
Reviewers: ab, t.p.northover, qcolombet, rovka, aditya_nandakumar
Subscribers: fhahn, kristof.beyls, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D36094
llvm-svn: 309804
Summary:
Now that we have control flow in place, fuse the per-rule tables into a
single table. This is a compile-time saving at this point. However, this will
also enable the optimization of a table so that similar instructions can be
tested together, reducing the time spent on the matching the code.
This is NFC in terms of externally visible behaviour but some internals have
changed slightly. State.MIs is no longer reset between each rule that is
attempted because it's not necessary to do so. As a consequence of this the
restriction on the order that instructions are added to State.MIs has been
relaxed to only affect recorded instructions that require new elements to be
added to the vector. GIM_RecordInsn can now write to any element from 1 to
State.MIs.size() instead of just State.MIs.size().
The compile-time regressions from the last commit were caused by the ARM target
including a non-const variable (zero_reg) in the table and therefore generating
an initializer for it. That variable is now const.
Reviewers: ab, t.p.northover, qcolombet, rovka, aditya_nandakumar
Reviewed By: rovka
Subscribers: kristof.beyls, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D35681
llvm-svn: 309264
The ARM bots have started failing and while this patch should be an improvement
for these bots, it's also the only suspect in the blamelist. Reverting while
Diana and I investigate the problem.
llvm-svn: 309111
Summary:
Now that we have control flow in place, fuse the per-rule tables into a
single table. This is a compile-time saving at this point. However, this will
also enable the optimization of a table so that similar instructions can be
tested together, reducing the time spent on the matching the code.
This is NFC in terms of externally visible behaviour but some internals have
changed slightly. State.MIs is no longer reset between each rule that is
attempted because it's not necessary to do so. As a consequence of this the
restriction on the order that instructions are added to State.MIs has been
relaxed to only affect recorded instructions that require new elements to be
added to the vector. GIM_RecordInsn can now write to any element from 1 to
State.MIs.size() instead of just State.MIs.size().
Reviewers: ab, t.p.northover, qcolombet, rovka, aditya_nandakumar
Reviewed By: rovka
Subscribers: kristof.beyls, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D35681
llvm-svn: 309094
Summary:
This will allow us to merge the various sub-tables into a single table. This is a
compile-time saving at this point. However, this will also enable the optimization
of a table so that similar instructions can be tested together, reducing the time
spent on the matching the code.
The bulk of this patch is a mechanical conversion to the new MatchTable object
which is responsible for tracking label definitions and filling in the index of
the jump targets. It is also responsible for nicely formatting the table.
This was necessary to support the new GIM_Try opcode which takes the index to
jump to if the match should fail. This value is unknown during table
construction and is filled in during emission. To support nesting try-blocks
(although we currently don't emit tables with nested try-blocks), GIM_Reject
has been re-introduced to explicitly exit a try-block or fail the overall match
if there are no active try-blocks.
Reviewers: ab, t.p.northover, qcolombet, rovka, aditya_nandakumar
Reviewed By: rovka
Subscribers: kristof.beyls, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D35117
llvm-svn: 308596
One place compared with 32, which I've replaced with LaneBitmask::BitWidth.
The other places are shifts of a constant 1 by a lane number. But if LaneBitmask were to be a larger type than 32-bits like 64-bits, the 1 would need to be 1ULL to do a 64-bit shift. To hide this I've added a LanebitMask::getLane that hides the shift and make sures the 1 is casted to correct type first.
llvm-svn: 308042
In each rule, each use of ComplexPattern is assigned an element in the Renderers
array. The matcher then collects renderer functions in this array and they are
used to render instructions. This works well for a single instruction but a
bug in the allocation mechanism causes the elements to be assigned on a
per-instruction basis rather than a per-rule basis.
So in the case of:
(set GPR32:$dst, (Op complex:$src1, complex:$src2))
tablegen currently assigns elements 0 and 1 to $src1 and $src2 respectively,
but for:
(set GPR32:$dst, (Op complex:$src1, (Op complex:$src2)))
it currently assigned both $src1 and $src2 the same element (0). This results in
one complex operand being rendered twice and the other being forgotten.
This patch corrects the allocation such that $src1 and $src2 are still allocated
different elements in this case.
llvm-svn: 307646
TreePatternNode considers them to be plain integers but MachineInstr considers
them to be a distinct kind of operand.
The tweak to AArch64InstrInfo.td to produce a simple test case is a NFC for
everything except GlobalISelEmitter (confirmed by diffing the tablegenerated
files). GlobalISelEmitter is currently unable to infer the type of operands in
the Dst pattern from the operands in the Src pattern.
llvm-svn: 307634
Some of our emitters were using the name of the Target to reference things that were created by others emitters using Namespace.
Apparently all targets have the same Target name as their instruction and register Namespace field?
Someone on IRC had a target that didn't do this and was getting build errors. This patch is a necessary, but maybe not sufficient fix.
llvm-svn: 307358
The conversion to MatchTable left the function names and comments referring to
C++ statements and expressions. Updated the names and comments to account for
the fact that they're no longer unconstrained statements/expressions.
llvm-svn: 307248
The conversion to MatchTable left the function names and comments referring to
C++ statements and expressions. Updated the names and comments to account for
the fact that they're no longer unconstrained statements/expressions.
llvm-svn: 307246
Summary:
As of this patch, 1018 out of 3938 rules are currently imported.
Depends on D32275
Reviewers: qcolombet, kristof.beyls, rovka, t.p.northover, ab, aditya_nandakumar
Reviewed By: qcolombet
Subscribers: dberris, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D32278
llvm-svn: 307240
If a method / function returns a StringRef but the
variable is of type const std::string& a temporary string is
created (StringRef has a cast operator to std::string),
which is a suboptimal behavior.
Differential revision: https://reviews.llvm.org/D34994
Test plan: make check-all
llvm-svn: 307195
Summary:
Also, made a few minor tweaks to shave off a little more cumulative memory consumption:
* All rules share a single NewMIs instead of constructing their own. Only one
will end up using it.
* Use MIs.resize(1) instead of MIs.clear();MIs.push_back(I) and prevent
GIM_RecordInsn from changing MIs[0].
Depends on D33764
Reviewers: rovka, vitalybuka, ab, t.p.northover, qcolombet, aditya_nandakumar
Reviewed By: ab
Subscribers: kristof.beyls, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D33766
llvm-svn: 307159
This implements suggesting other mnemonics when an invalid one is specified,
for example:
$ echo "adXd r1,r2,#3" | llvm-mc -triple arm
<stdin>:1:1: error: invalid instruction, did you mean: add, qadd?
adXd r1,r2,#3
^
The implementation is target agnostic, but as a first step I have added it only
to the ARM backend; so the ARM backend is a good example if someone wants to
enable this too for another target.
Differential Revision: https://reviews.llvm.org/D33128
llvm-svn: 307148
r307133 brought back a couple instances of the same mistake that was already
fixed by r307088. Fixed it again.
Using NumPatternEmitted as a unique id for the tables is not valid on release
builds since the counters don't count in that case.
llvm-svn: 307146
Summary:
This further improves the compile-time regressions that will be caused by a
re-commit of r303259.
Also added included preliminary work in preparation for the multi-insn emitter
since I needed to change the relevant part of the API for this patch anyway.
Depends on D33758
Reviewers: rovka, vitalybuka, ab, t.p.northover, qcolombet, aditya_nandakumar
Reviewed By: ab
Subscribers: kristof.beyls, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D33764
llvm-svn: 307133
Using NumPatternEmitted as a unique id for the tables is not valid on release
builds since the counters don't count in that case.
Also fix an unused variable warning.
llvm-svn: 307088
Summary:
Replace the matcher if-statements for each rule with a state-machine. This
significantly reduces compile time, memory allocations, and cumulative memory
allocation when compiling AArch64InstructionSelector.cpp.o after r303259 is
recommitted.
The following patches will expand on this further to fully fix the regressions.
Reviewers: rovka, ab, t.p.northover, qcolombet, aditya_nandakumar
Reviewed By: ab
Subscribers: vitalybuka, aemerson, javed.absar, igorb, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D33758
llvm-svn: 307079
Record::getValues returns ArrayRef which has a cast operator
to std::vector, as a result a temporary vector is created
if the type of the variable is const std::vector&
that is suboptimal in this case.
Differential revision: https://reviews.llvm.org/D34969
Test plan: make check-all
llvm-svn: 307063
The style guide states that the explicit `inline`
should not be used with inline methods. classof is
very common inline method with a fair amount on
inconsistency:
$ git grep classof ./include | grep inline | wc -l
230
$ git grep classof ./include | grep -v inline | wc -l
257
I chose to target this method rather the larger change
since this method is easily cargo-culted (I did it at
least once). I considered doing the larger change and
removing all occurrences but that would be a much larger
change.
Differential Revision: https://reviews.llvm.org/D33906
llvm-svn: 306731
Add headers for each section of output, with white space and "+++" to
improve readability.
Differential Revision: https://reviews.llvm.org/D34713
llvm-svn: 306492
Summary:
After this patch, we finally have test cases that require multiple
instruction emission.
Depends on D33590
Reviewers: ab, qcolombet, t.p.northover, rovka, kristof.beyls
Subscribers: javed.absar, llvm-commits, igorb
Differential Revision: https://reviews.llvm.org/D33596
llvm-svn: 306388
All patterns reside in a std::vector container, where new variants are added to it using the standard library's emplace_back function.
When calling this with a new element while there is no enough allocated space, a bigger space is allocated and all the old info in the small vector is copied to the newly allocated vector, then the old vector is freed.
The problem is that before doing this "copying", we take a reference of one of the elements in the old vector, and after the "copying" we add it to the new vector.
As the old vector is freed after the copying, the reference now does not point to a valid element.
Added new function to the API of CodeGenDAGPatterns class to return the same information as a copy in order to avoid this issue.
This was revealed in rL305465 that added many patterns and forced the reallocation of the vector which caused crashes in windows bots.
Differential Revision: https://reviews.llvm.org/D34341
llvm-svn: 306371
Summary:
This patch does a few things that should remove some copies around PatternsToMatch. These were noticed while reviewing code for D34341.
Change constructor to take Dstregs by value and move it into the class. Change one of the callers to add std::move to the argument so that it gets moved.
Make AddPatternToMatch take PatternToMatch by rvalue reference so we can move it into the PatternsToMatch vector. I believe we should have a implicit default move constructor available on PatternToMatch. I chose rvalue reference because both callers call it with temporaries already.
Reviewers: RKSimon, aymanmus, spatel
Reviewed By: aymanmus
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D34411
llvm-svn: 306251
This is patch for GSoC project, bash-completion for clang.
To use this on bash, please run `source clang/utils/bash-autocomplete.sh`.
bash-autocomplete.sh is code for bash-completion.
In this patch, Options.td was mainly changed in order to add value class
in Options.inc.
llvm-svn: 305805
Summary:
As part of this
* Emitted instructions now have named MachineInstr variables associated
with them. This isn't particularly important yet but it's a small step
towards multiple-insn emission.
* constrainSelectedInstRegOperands() is no longer hardcoded. It's now added
as the ConstrainOperandsToDefinitionAction() action. COPY_TO_REGCLASS uses
an alternate constraint mechanism ConstrainOperandToRegClassAction() which
supports arbitrary constraints such as that defined by COPY_TO_REGCLASS.
Reviewers: ab, qcolombet, t.p.northover, rovka, kristof.beyls, aditya_nandakumar
Reviewed By: ab
Subscribers: javed.absar, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D33590
llvm-svn: 305791
The variant generation for commutative/associative patterns would simply
delete the first output from the list assuming that it was identical to
the original pattern. This does not have to be the case, and a legitimate
variant could actually be removed that way.
llvm-svn: 305556
In testing, we've found yet another miscompile caused by the new tables.
And this one is even less clear how to fix (we could teach it to fold
a 16-bit load instead of the 32-bit load it wants, or block folding
entirely).
Also, the approach to excluding instructions seems increasingly to not
scale well.
I have left a more detailed analysis on the review log for the original
patch (https://reviews.llvm.org/D32684) along with suggested path
forward. I will land an additional test case that I wrote which covers
the code that was miscompiling (folding into the output of `pextrw`) in
a subsequent commit to keep this a pure revert.
For each commit reverted here, I've restricted the revert to the
non-test code touching the x86 fold table emission until the last commit
where I did revert the test updates. This means the *new* test cases
added for `insertps` and `xchg` remain untouched (and continue to pass).
Reverted commits:
r304540: [X86] Don't fold into memory operands into insertps in the ...
r304347: [TableGen] Adapt more places to getValueAsString now ...
r304163: [X86] Don't fold away the memory operand of an xchg.
r304123: Don't capture a temporary std::string in a StringRef.
r304122: Resubmit "[X86] Adding new LLVM TableGen backend that ..."
Original commit was in r304088, and after a string of fixes was reverted
previously in r304121 to fix build bots, and then re-landed in r304122.
llvm-svn: 304762
insertps behaves differently, the register form selects from an input
register based on the immediate operand while the memory form just loads
the given address. We have custom code to change the immediate in cases
where that's legal, so completely remove insertps from the generated
tables.
llvm-svn: 304540
It tried to detect 9 letters (the length of anonymous) followed by a period. But anonymous classes start with "anonymous_" rather than "anonymous." these days.
llvm-svn: 304387
Internally both these methods just return the result of getValue on either a StringInit or a CodeInit object. In both cases this returns a StringRef pointing to a string allocated in the BumpPtrAllocator so its not going anywhere. So we can just pass that StringRef along.
This is a fairly naive patch that targets just the build failures caused by this change. There's additional work that can be done to avoid creating std::string at call sites that still think getValueAsString returns a std::string. I'll try to clean those up in future patches.
Differential Revision: https://reviews.llvm.org/D33710
llvm-svn: 304325
xchg with a mem operand has different locking semantics. If we unfold it
into a xchg r,r we will loose the implicit lock. Likewise we never want
to fold a register xchg into a memory one as it would be a lot slower.
This triggers during LLVM selfhost.
llvm-svn: 304163
This was reverted due to buildbot breakages and I was not familiar
with this code to investigate it. But while trying to get a
useful backtrace for the author, it turns out the fix was very
obvious. Resubmitting this patch as is, and will submit the
fix in a followup so that the fix is not hidden in the larger
CL.
llvm-svn: 304122
This reverts commit 28cb1003507f287726f43c771024a1dc102c45fe as well
as all subsequent followups. llvm-tblgen currently segfaults with
this change, and it seems it has been broken on the bots all
day with no fixes in preparation. See, for example:
http://lab.llvm.org:8011/builders/clang-x86-windows-msvc2015/
llvm-svn: 304121
X86 backend holds huge tables in order to map between the register and memory forms of each instruction.
This TableGen Backend automatically generated all these tables with the appropriate flags for each entry.
Differential Revision: https://reviews.llvm.org/D32684
llvm-svn: 304088
Summary:
It's rare but a small number of patterns use IntInit's at the root of the match.
On X86, one such rule is enabled by the OptForSize predicate and causes the
compiler to use the smaller:
%0 = MOV32r1
instead of the usual:
%0 = MOV32ri 1
This patch adds support for matching IntInit's at the root and uses this as a
test case for the optsize attribute that was implemented in r301750
Reviewers: qcolombet, ab, t.p.northover, rovka, kristof.beyls, aditya_nandakumar
Reviewed By: qcolombet
Subscribers: igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D32791
llvm-svn: 303678
It's causing some buildbots to timeout whenever tablegen needs re-compilation,
particularly those with -fsanitize=memory but not only them. A compile time
regression was expected since it triples the amount of SelectionDAG rules we
are able to import but it's currently too high.
llvm-svn: 303542
Summary:
As of this patch, 1018 out of 3938 rules are currently imported.
Depends on D32275
Reviewers: qcolombet, kristof.beyls, rovka, t.p.northover, ab, aditya_nandakumar
Reviewed By: qcolombet
Subscribers: dberris, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D32278
The previous commit failed on test-suite/Bitcode/simd_ops/AArch64_halide_runtime.bc
because isImmOperandEqual() assumed MO was a register operand and that's not
always true.
llvm-svn: 303341
Summary:
As of this patch, 1018 out of 3938 rules are currently imported.
Depends on D32275
Reviewers: qcolombet, kristof.beyls, rovka, t.p.northover, ab, aditya_nandakumar
Reviewed By: qcolombet
Subscribers: dberris, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D32278
llvm-svn: 303259
Summary:
Without this, it's possible to encounter multiple defs for a register.
This is triggered by the current version of D32868 when applied to trunk.
Reviewers: qcolombet, ab, t.p.northover, rovka, kristof.beyls
Reviewed By: qcolombet
Subscribers: llvm-commits, igorb
Differential Revision: https://reviews.llvm.org/D32869
llvm-svn: 303253
When looping through a destination pattern's operands to decide how many
default operands we need to introduce, we used to count the "expanded"
number of operands. So if one default operand would be rendered as 2
values, we'd count it as 2 operands, when in fact it needs to count as
only 1 operand regardless of how many values it expands to.
This turns out to be a problem only in some very specific cases, e.g.
when we have one operand with multiple default values followed by more
operands with default values (see the new test). In such a situation
we'd stop looping before looking at all the operands, and then error out
assuming that we don't have enough default operands to make up the
shortfall.
At the moment this only affects ARM.
The patch removes the loop counting default operands entirely and
assumes that we'll have to introduce values for any default operand that
we find (i.e. we're assuming it cannot be given as a child at all). It
also extracts the code for adding renderers for default operands into a
helper method.
Differential Revision: https://reviews.llvm.org/D33031
llvm-svn: 303240
Summary:
Do three things to help with that:
- Add AttributeList::FirstArgIndex, which is an enumerator currently set
to 1. It allows us to change the indexing scheme with fewer changes.
- Add addParamAttr/removeParamAttr. This just shortens addAttribute call
sites that would otherwise need to spell out FirstArgIndex.
- Remove some attribute-specific getters and setters from Function that
take attribute list indices. Most of these were only used from
BuildLibCalls, and doesNotAlias was only used to test or set if the
return value is malloc-like.
I'm happy to split the patch, but I think they are probably easier to
review when taken together.
This patch should be NFC, but it sets the stage to change the indexing
scheme to this, which is more convenient when indexing into an array:
0: func attrs
1: retattrs
2...: arg attrs
Reviewers: chandlerc, pete, javed.absar
Subscribers: david2050, llvm-commits
Differential Revision: https://reviews.llvm.org/D32811
llvm-svn: 302060
Fixes PR31789 - When loop-vectorize tries to use these intrinsics for a
non-default address space pointer we fail with a "Calling a function with a
bad singature!" assertion. This patch solves this by adding the 'vector of
pointers' argument as an overloaded type which will determine the address
space.
Differential revision: https://reviews.llvm.org/D31490
llvm-svn: 302018
Emit and use the TableGen instruction selector for ARM. At the moment,
this allows us to remove the hand-written code for selecting G_SDIV and
G_UDIV.
Future commits will focus on increasing the code coverage for it and
removing more dead code from the current instruction selector.
llvm-svn: 301905
Summary:
Predicate<> now has a field to indicate how often it must be recomputed.
Currently, there are two frequencies, per-module (RecomputePerFunction==0)
and per-function (RecomputePerFunction==1). Per-function predicates are
currently recomputed more frequently than necessary since the only predicate
in this category is cheap to test. Per-module predicates are now computed in
getSubtargetImpl() while per-function predicates are computed in selectImpl().
Tablegen now manages the PredicateBitset internally. It should only be
necessary to add the required includes.
Also fixed a problem revealed by the test case where
constrainSelectedInstRegOperands() would attempt to tie operands that
BuildMI had already tied.
Reviewers: ab, qcolombet, t.p.northover, rovka, aditya_nandakumar
Reviewed By: rovka
Subscribers: kristof.beyls, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D32491
llvm-svn: 301750
The IntrNoMem, IntrReadMem, IntrWriteMem, and IntrArgMemOnly intrinsic
properties differ from their corresponding LLVM IR attributes by specifying
that the intrinsic, in addition to its memory properties, has no other side
effects.
The IntrHasSideEffects flag used in combination with one of the memory flags
listed above, makes it possible to define an intrinsic such that its
properties at the CodeGen layer match its properties at the IR layer.
Patch by Tom Stellard
llvm-svn: 301685
Summary:
It functions just like RegisterClass except that the class is obtained
from a field.
Depends on D31761.
Reviewers: ab, qcolombet, t.p.northover, rovka, kristof.beyls, aditya_nandakumar
Reviewed By: ab
Subscribers: dberris, llvm-commits, igorb
Differential Revision: https://reviews.llvm.org/D32229
llvm-svn: 301080
Summary:
Some targets need to be able to do more complex rendering than just adding an
operand or two to an instruction. For example, it may need to insert an
instruction to extract a subreg first, or it may need to perform an operation
on the operand.
In SelectionDAG, targets would create SDNode's to achieve the desired effect
during the complex pattern predicate. This worked because SelectionDAG had a
form of garbage collection that would take care of SDNode's that were created
but not used due to a later predicate rejecting a match. This doesn't translate
well to GlobalISel and the churn was wasteful.
The API changes in this patch enable GlobalISel to accomplish the same thing
without the waste. The API is now:
InstructionSelector::OptionalComplexRendererFn selectArithImmed(MachineOperand &Root) const;
where Root is the root of the match. The return value can be omitted to
indicate that the predicate failed to match, or a function with the signature
ComplexRendererFn can be returned. For example:
return OptionalComplexRendererFn(
[=](MachineInstrBuilder &MIB) { MIB.addImm(Immed).addImm(ShVal); });
adds two immediate operands to the rendered instruction. Immed and ShVal are
captured from the predicate function.
As an added bonus, this also reduces the amount of information we need to
provide to GIComplexOperandMatcher.
Depends on D31418
Reviewers: aditya_nandakumar, t.p.northover, qcolombet, rovka, ab, javed.absar
Reviewed By: ab
Subscribers: dberris, kristof.beyls, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D31761
llvm-svn: 301079
canMutate() was returning true when the operands were all in the same order as
the matched instruction. However, it wasn't checking the operands were actually
on that instruction. This worked when we could only match a single instruction
but the addition of nested instruction matching led to cases where the operands
could be split across multiple instructions. canMutate() now returns false if
operands belong to instructions other than the root of the match.
llvm-svn: 301077
Summary:
The SelectionDAG importer now imports rules with Predicate's attached via
Requires, PredicateControl, etc. These predicates are implemented as
bitset's to allow multiple predicates to be tested together. However,
unlike the MC layer subtarget features, each target only pays for it's own
predicates (e.g. AArch64 doesn't have 192 feature bits just because X86
needs a lot).
Both AArch64 and X86 derive at least one predicate from the MachineFunction
or Function so they must re-initialize AvailableFeatures before each
function. They also declare locals in <Target>InstructionSelector so that
computeAvailableFeatures() can use the code from SelectionDAG without
modification.
Reviewers: rovka, qcolombet, aditya_nandakumar, t.p.northover, ab
Reviewed By: rovka
Subscribers: aemerson, rengolin, dberris, kristof.beyls, llvm-commits, igorb
Differential Revision: https://reviews.llvm.org/D31418
llvm-svn: 300993
It's causing llvm-clang-x86_64-expensive-checks-win to fail to compile and I
haven't worked out why. Reverting to make it green while I figure it out.
llvm-svn: 300978
This should fix llvm-clang-x86_64-expensive-checks-win
I reproduced the error using the following code:
namespace llvm {
// Moving this out of the llvm namespace fixes the error.
template<unsigned NumBits> class PredicateBitsetImpl {};
}
namespace {
const unsigned MAX_SUBTARGET_PREDICATES = 11;
// This works on Clang but is broken on MSVC
// using PredicateBitset = PredicateBitsetImpl<MAX_SUBTARGET_PREDICATES>;
// Some versions emit a syntax error here ("error C2061: syntax error: identifier
// 'PredicateBitsetImpl'") but others accept it and only emit the C3646 below.
//
// This works on Clang and MSVC
using PredicateBitset = llvm::PredicateBitsetImpl<MAX_SUBTARGET_PREDICATES>;
class Foo {
private:
PredicateBitset A; // error C3646: 'A': unknown override specifier
};
}
llvm-svn: 300970
Summary:
The SelectionDAG importer now imports rules with Predicate's attached via
Requires, PredicateControl, etc. These predicates are implemented as
bitset's to allow multiple predicates to be tested together. However,
unlike the MC layer subtarget features, each target only pays for it's own
predicates (e.g. AArch64 doesn't have 192 feature bits just because X86
needs a lot).
Both AArch64 and X86 derive at least one predicate from the MachineFunction
or Function so they must re-initialize AvailableFeatures before each
function. They also declare locals in <Target>InstructionSelector so that
computeAvailableFeatures() can use the code from SelectionDAG without
modification.
Reviewers: rovka, qcolombet, aditya_nandakumar, t.p.northover, ab
Reviewed By: rovka
Subscribers: aemerson, rengolin, dberris, kristof.beyls, llvm-commits, igorb
Differential Revision: https://reviews.llvm.org/D31418
llvm-svn: 300964
Adds scalable vector machine value types, and updates
the switch statements required for tablegen.
Patch by Graham Hunter.
Differential Revision: https://reviews.llvm.org/D32018
llvm-svn: 300840
Patch by Ettore Speziale
Allow TableGen to generate static functions to perform GCC/MS builtin name to
target specific intrinsic ID mapping.
https://reviews.llvm.org/D31150
llvm-svn: 300735
Summary:
As far as instruction selection is concerned, all three appear to be same thing.
Support for these operands is experimental since AArch64 doesn't make use
of them and the in-tree targets that do use them (AMDGPU for
OperandWithDefaultOps, AMDGPU/ARM/Hexagon/Lanai for PredicateOperand, and ARM
for OperandWithDefaultOps) are not using tablegen-erated GlobalISel yet.
Reviewers: rovka, aditya_nandakumar, t.p.northover, qcolombet, ab
Reviewed By: rovka
Subscribers: inglorion, aemerson, rengolin, mehdi_amini, dberris, kristof.beyls, igorb, tpr, llvm-commits
Differential Revision: https://reviews.llvm.org/D31135
llvm-svn: 300037
Summary:
Temporaries are now allocated to operands instead of predicates and this
allocation is used to correctly pair up the rendered operands with the
matched operands.
Previously, ComplexPatterns were allocated temporaries independently in the
Src Pattern and Dst Pattern, leading to mismatches. Additionally, the Dst
Pattern failed to account for the allocated index and therefore always used
temporary 0, 1, ... when it should have used base+0, base+1, ...
Thanks to Aditya Nandakumar for noticing the bug.
Depends on D30539
Reviewers: ab, t.p.northover, qcolombet, rovka, aditya_nandakumar
Reviewed By: rovka
Subscribers: igorb, dberris, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D31054
llvm-svn: 299538
Fix other cases of 'const StringRef' creeping back in at the same time.
This should fix the llvm-clang-x86_64-expensive-checks-win buildbot.
llvm-svn: 299433
Summary:
Lift the restrictions that prevented the tree walking introduced in the
previous change and add support for patterns like:
(G_ADD (G_MUL (G_SEXT $src1), (G_SEXT $src2)), $src3) -> SMADDWrrr $dst, $src1, $src2, $src3
Also adds support for G_SEXT and G_ZEXT to support these cases.
One particular aspect of this that I should draw attention to is that I've
tried to be overly conservative in determining the safety of matches that
involve non-adjacent instructions and multiple basic blocks. This is intended
to be used as a cheap initial check and we may add a more expensive check in
the future. The current rules are:
* Reject if any instruction may load/store (we'd need to check for intervening
memory operations.
* Reject if any instruction has implicit operands.
* Reject if any instruction has unmodelled side-effects.
See isObviouslySafeToFold().
Reviewers: t.p.northover, javed.absar, qcolombet, aditya_nandakumar, ab, rovka
Reviewed By: ab
Subscribers: igorb, dberris, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D30539
llvm-svn: 299430
Functions that still return Expected<X> are now called createAndImport*()
Changing the return type was requested in the review comments for r299001
llvm-svn: 299063
Summary:
But don't actually inspect the tree any deeper than we already do. This
change is NFC but the next one will enable full traversal of the
source/destination patterns.
Depends on D30535
Reviewers: t.p.northover, qcolombet, aditya_nandakumar, rovka, ab
Subscribers: igorb, dberris, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D30536
llvm-svn: 299001
This patch enables schedulers to specify instructions that
cannot be issued with any other instructions.
It also fixes BeginGroup/EndGroup.
Reviewed by: Andrew Trick
Differential Revision: https://reviews.llvm.org/D30744
llvm-svn: 298885
When using -debug with -gen-register-info, tablegen will crash when
trying to print a name of a non-native register unit. This patch only
affects the debug information generated while running llvm-tblgen,
and has no impact on the compilable code coming out of it.
llvm-svn: 298875
Summary:
The categories are emitted in a strange order in this patch due to a bug in the
CommandLine library.
Reviewers: ab
Reviewed By: ab
Subscribers: ab, llvm-commits
Differential Revision: https://reviews.llvm.org/D30995
llvm-svn: 298843
Do not force the backends to use target name as namespace.
Original patch by Mattias Eriksson
Reviewers: stoklund, craig.topper
Reviewed By: stoklund
Subscribers: materi, llvm-commits
Differential Revision: https://reviews.llvm.org/D31322
llvm-svn: 298834
This is another step towards implementing register classes with
parametrized register/spill sizes and value types.
This is an updated version of r298652. The difference is that MCRegister-
Class still contains register size, available as getPhysRegSize(). The
old function getSize was retained as a temporary measure to avoid build
breakage for out-of-tree targets.
llvm-svn: 298739
This is another step towards implementing register classes with
parametrized register/spill sizes.
Differential Revision: https://reviews.llvm.org/D31299
llvm-svn: 298652
Summary:
This class is a list of AttributeSetNodes corresponding the function
prototype of a call or function declaration. This class used to be
called ParamAttrListPtr, then AttrListPtr, then AttributeSet. It is
typically accessed by parameter and return value index, so
"AttributeList" seems like a more intuitive name.
Rename AttributeSetImpl to AttributeListImpl to follow suit.
It's useful to rename this class so that we can rename AttributeSetNode
to AttributeSet later. AttributeSet is the set of attributes that apply
to a single function, argument, or return value.
Reviewers: sanjoy, javed.absar, chandlerc, pete
Reviewed By: pete
Subscribers: pete, jholewinski, arsenm, dschuff, mehdi_amini, jfb, nhaehnle, sbc100, void, llvm-commits
Differential Revision: https://reviews.llvm.org/D31102
llvm-svn: 298393
These are needed due to some obscure rules in the standard
about how std::vector selects between copy and move
constructors, which can cause a conforming implementation
to attempt to select the copy constructor of RuleMatcher,
which will fail since std::unique_ptr<> isn't copyable.
llvm-svn: 298294
Summary:
Prepare the way for nested instruction matching support by having actions
like CopyRenderer look up operands in the RuleMatcher rather than a
specific InstructionMatcher. This allows actions to reference any operand
from any matched instruction.
It works by checking the 'shape' of the match and capturing
each matched instruction to a local variable. If the shape is wrong
(not enough operands, leaf nodes where non-leafs are expected, etc.), then
the rule exits early without checking the predicates. Once we've captured
the instructions, we then test the predicates as before (except using the
local variables). If the match is successful, then we render the new
instruction as before using the local variables.
It's not noticable in this patch but by the time we support multiple
instruction matching, this patch will also cause a significant improvement
to readability of the emitted code since
MRI.getVRegDef(I->getOperand(0).getReg()) will simply be MI1 after
emitCxxCaptureStmts().
This isn't quite NFC because I've also fixed a bug that I'm surprised we
haven't encountered yet. It now checks there are at least the expected
number of operands before accessing them with getOperand().
Depends on D30531
Reviewers: t.p.northover, qcolombet, aditya_nandakumar, ab, rovka
Reviewed By: rovka
Subscribers: dberris, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D30535
llvm-svn: 298257
Summary:
Adds a new kind of MachineOperand: MO_Placeholder.
This operand must not appear in the MIR and only exists as a way of
creating an 'uninitialized' operand until a matcher function overwrites it.
Depends on D30046, D29712
Reviewers: t.p.northover, ab, rovka, aditya_nandakumar, javed.absar, qcolombet
Reviewed By: qcolombet
Subscribers: dberris, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D30089
llvm-svn: 297782
Currently we don't enforce that ISD::ANY_EXTEND, ZERO_EXTEND, SIGN_EXTEND, TRUNC, FP_ROUND, FP_EXTEND have the same number of elements(including scalar) between their input and output. Though we have them documented as such. Up until a few months ago x86 created nodes that violated this rule. That's all been fixed now, and we should enforce the rule going forward.
In order to do this we need to allow SDTCisSameNumEltsAs to support scalar types and not enforce being a vector. If one type is scalar we will force the other type to also be scalar.
Differential Revision: https://reviews.llvm.org/D30878
llvm-svn: 297648
There were some issues in the implementation of enumerate()
preventing it from being used in various contexts. These were
all related to the fact that it did not supporter llvm's
iterator_facade_base class. So this patch adds support for that
and additionally exposes a new helper method to_vector() that
will evaluate an entire range and store the results in a
vector.
Differential Revision: https://reviews.llvm.org/D30853
llvm-svn: 297633
This reverts r297596.
There were other issues that were making this not work that have been fixed now. Reverting this results in a more accurate table.
llvm-svn: 297602
This exposed that we have several intrinsic instructions that have identical TSFlags to other instructions. We should merge their patterns and kill of the duplicate. I'll fix that in a follow up patch.
llvm-svn: 297596
SelectCode has been returning nullptr since 182dac0 ("SDAG: Make
SelectCodeCommon return void", 2016-05-10). Make SelectCode also
return void instead, as all callers have been updated.
Patch by Sven van Haastregt.
Review: https://reviews.llvm.org/D30497
llvm-svn: 297377
Summary:
This will allow future patches to inspect the details of the LLT. The implementation is now split between
the Support and CodeGen libraries to allow TableGen to use this class without introducing layering concerns.
Thanks to Ahmed Bougacha for finding a reasonable way to avoid the layering issue and providing the version of this patch without that problem.
The problem with the previous commit appears to have been that TableGen was including CodeGen/LowLevelType.h instead of Support/LowLevelTypeImpl.h.
Reviewers: t.p.northover, qcolombet, rovka, aditya_nandakumar, ab, javed.absar
Subscribers: arsenm, nhaehnle, mgorny, dberris, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D30046
llvm-svn: 297241
More module problems. This time it only showed up in the stage 2 compile of
clang-x86_64-linux-selfhost-modules-2 but not the stage 1 compile.
Somehow, this change causes the build to need Attributes.gen before it's been
generated.
llvm-svn: 297188
Summary:
This will allow future patches to inspect the details of the LLT. The implementation is now split between
the Support and CodeGen libraries to allow TableGen to use this class without introducing layering concerns.
Thanks to Ahmed Bougacha for finding a reasonable way to avoid the layering issue and providing the version of this patch without that problem.
Reviewers: t.p.northover, qcolombet, rovka, aditya_nandakumar, ab, javed.absar
Subscribers: arsenm, nhaehnle, mgorny, dberris, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D30046
llvm-svn: 297177
X86EvexToVex machine instruction pass compresses EVEX encoded instructions by replacing them with their identical VEX encoded instructions when possible.
It uses manually supported 2 large tables that map the EVEX instructions to their VEX ideticals.
This TableGen backend replaces the tables by automatically generating them.
Differential Revision: https://reviews.llvm.org/D30451
llvm-svn: 297127
Extra const in the StringRef argument meant that MSVC complained about it not correctly overriding from OperandPredicateMatcher::emitCxxPredicateExpr (which didn't have the const)
llvm-svn: 296138
Summary:
This isn't testable for AArch64 by itself so this patch also adds
support for constant immediates in the pattern and physical
register uses in the result.
The new IntOperandMatcher matches the constant in patterns such as
'(set $rd:GPR32, (G_XOR $rs:GPR32, -1))'. It's always safe to fold
immediates into an instruction so this is the first rule that will match
across multiple BB's.
The Renderer hierarchy is responsible for adding operands to the result
instruction. Renderers can copy operands (CopyRenderer) or add physical
registers (in particular %wzr and %xzr) to the result instruction
in any order (OperandMatchers now import the operand names from
SelectionDAG to allow renderers to access any operand). This allows us to
emit the result instruction for:
%1 = G_XOR %0, -1 --> %1 = ORNWrr %wzr, %0
%1 = G_XOR -1, %0 --> %1 = ORNWrr %wzr, %0
although the latter is untested since the matcher/importer has not been
taught about commutativity yet.
Added BuildMIAction which can build new instructions and mutate them where
possible. W.r.t the mutation aspect, MatchActions are now told the name of
an instruction they can recycle and BuildMIAction will emit mutation code
when the renderers are appropriate. They are appropriate when all operands
are rendered using CopyRenderer and the indices are the same as the matcher.
This currently assumes that all operands have at least one matcher.
Finally, this change also fixes a crash in
AArch64InstructionSelector::select() caused by an immediate operand
passing isImm() rather than isCImm(). This was uncovered by the other
changes and was detected by existing tests.
Depends on D29711
Reviewers: t.p.northover, ab, qcolombet, rovka, aditya_nandakumar, javed.absar
Reviewed By: rovka
Subscribers: aemerson, dberris, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D29712
llvm-svn: 296131
The 'Kind' member used in RTTI for InstructionPredicateMatcher was not
initialized but went undetected since I always ended up with the correct value.
llvm-svn: 296126
Summary:
This makes more important rules have priority over less important rules.
For example, '%a = G_ADD $b:s64, $c:s64' has priority over
'%a = G_ADD $b:s32, $c:s32'. Previously these rules were emitted in the
correct order by chance.
NFC in this patch but it is required to make the next patch work correctly.
Depends on D29710
Reviewers: t.p.northover, ab, qcolombet, aditya_nandakumar, rovka
Reviewed By: ab, rovka
Subscribers: javed.absar, dberris, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D29711
llvm-svn: 296121
Summary:
Each OperandPredicateMatcher shouldn't need to know how to generate the expression
to reference a MachineOperand. The OperandMatcher should provide it.
In addition to separating responsibilities, this also lays some groundwork for
decoupling source patterns from destination patterns to allow invented operands
or operands provided by GlobalISel's equivalent to the ComplexPattern<> class.
Depends on D29709
Reviewers: t.p.northover, ab, rovka, qcolombet, aditya_nandakumar
Reviewed By: ab
Subscribers: dberris, kristof.beyls, llvm-commits, igorb
Differential Revision: https://reviews.llvm.org/D29710
llvm-svn: 295668
Summary:
In the near future the rules will be sorted between these two steps to
ensure that more important rules are not prevented by less important ones.
Reviewers: t.p.northover, ab, rovka, qcolombet, aditya_nandakumar
Reviewed By: ab
Subscribers: dberris, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D29709
llvm-svn: 295661
Add WIG value to all of AVX instructions which ignore the W-bit in their encoding, instead of giving them the default value of 0.
This patch is needed for a follow up work on EVEX2VEX pass (replacing EVEX encoded instructions with their corresponding VEX version when possible).
Differential Revision: https://reviews.llvm.org/D29876
llvm-svn: 295643
To help assist in debugging ISEL or to prioritize GlobalISel backend
work, this patch adds two more tables to <Target>GenISelDAGISel.inc -
one which contains the patterns that are used during selection and the
other containing include source location of the patterns
Enabled through CMake varialbe LLVM_ENABLE_DAGISEL_COV
llvm-svn: 295081
Instead of emitting the matcher code directly, return the rule matcher
and the skip reason as an Expected<RuleMatcher>.
This will let us record all matchers and process them before emission.
It's a somewhat unconventional use of Error, but it's nicer than, say,
std::pair, because of the bool conversions.
Differential Revision: https://reviews.llvm.org/D29743
llvm-svn: 294706
Inside an alias group, when ordering instruction aliases, we rely
on the priority field to sort them.
When the priority is not set or more generally when there is a tie between
two aliases, we used to rely on the lexicographic order. However, this
order can change for the anonymous records when more instruction, intrinsic,
etc. are inserted.
For instance, given two anonymous records r1 and r2 with respective name
A_999 and A_1000, their lexicography order will be r2 then r1. Now, if
an instruction is added before them, their name will become respectively
A_1000 and A_1001, thus the lexicography order will be r1 then r2, i.e.,
it changed.
If that happens in an alias group, the assembly output would prefer a
different alias for no apparent good reasons.
A way to fix that is to use proper priority for all aliases, but we
can also make the tie breaker comparison smarter and use a deterministic
ordering. This is what this patch does.
llvm-svn: 294695
This patch checks the number of operands in the resulting
instruction instead of just the alias, then skips over
tied operands when generating the printing method.
This allows us to generate the preferred assembly syntax
for the AArch64 'ins' instruction, which should always be
displayed as 'mov' according to the ARMARM.
Several unit tests have changed as a result, but only to
reflect the preferred disassembly.
Some other InstAlias patterns (movk/bic/orr) needed a
slight adjustment to stop them becoming the default
and breaking other unit tests.
Patch by Graham Hunter.
Differential Revision: https://reviews.llvm.org/D29219
llvm-svn: 294437
Summary:
The Mips target is the only user of mnemonicIsValid. This patch
moves this method from AsmMatcherEmitter.cpp to MipsAsmParser.cpp,
getting rid of the method in all other targets where it generated
warnings about an unused function.
Patch by Gonsolo.
Reviewers: craig.topper
Reviewed By: craig.topper
Subscribers: sdardis
Differential Revision: https://reviews.llvm.org/D28748
llvm-svn: 294400
Refactor a helper function, FactorNodes, to search for a push node in constant space. This resolves a problem in a not-yet-upstreamed backend where a recursive pattern blew the call stack (at a depth of 255) under a debug build of tablegen. No functional change so no new test coverage. The change is minimal to avoid disturbing existing behaviour.
Differential Revision: https://reviews.llvm.org/D29080
llvm-svn: 294230
This lets us split out PatternToMatch from the top-level RuleMatcher,
where it doesn't really belong. That, in turn, lets us eventually
generate RuleMatchers from non-SelectionDAG sources.
llvm-svn: 294076
Use the qualified name for StringLiteral (llvm::StringLiteral) when
generating the sources. This is needed as the generated files may be
used out-of-tree (e.g. swift) where you may not have a
`using namespace llvm;` resulting in an undefined lookup.
llvm-svn: 293577
Tablegen emitted a warning when the fast isel emitter created dead
code by emitting a pattern that has no predicate before a pattern
that has one.
This should be an error but was originally only a warning because the X86
backend had a buggy definition that unintentionally caused this to be hit
(PR21575). That has been fixed a while ago (r222094), so it's safe to
upgrade the warning to an error.
llvm-svn: 293534
Summary:
AMDGPU has two register classes with the same set of registers, and this
was causing this tablegen backend would get stuck in infinite recursion.
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: tpr, wdng, llvm-commits
Differential Revision: https://reviews.llvm.org/D29049
llvm-svn: 293483
We had various variants of defining dump() functions in LLVM. Normalize
them (this should just consistently implement the things discussed in
http://lists.llvm.org/pipermail/cfe-dev/2014-January/034323.html
For reference:
- Public headers should just declare the dump() method but not use
LLVM_DUMP_METHOD or #if !defined(NDEBUG) || defined(LLVM_ENABLE_DUMP)
- The definition of a dump method should look like this:
#if !defined(NDEBUG) || defined(LLVM_ENABLE_DUMP)
LLVM_DUMP_METHOD void MyClass::dump() {
// print stuff to dbgs()...
}
#endif
llvm-svn: 293359
I think the initial version of r293172 was trying:
std::forward<Args...>(args)...
which doesn't compile. This seems like the correct way:
std::forward<Args>(args)...
llvm-svn: 293214
Summary:
This should make it possible to easily add everything needed to import all
the existing SelectionDAG rules. It should also serve the likely
kinds of GlobalISel rules (some of which are not currently representable
in SelectionDAG) once we've nailed down the tablegen definition for that.
The hierarchy is as follows:
MatcherRule - A matching rule. Currently used to emit C++ ISel code but will
| also be used to emit test cases and tablegen definitions in the
| near future.
|- Instruction(s) - Represents the instruction to be matched.
|- Instruction Predicate(s) - Test the opcode, arithmetic flags, etc. of an
| instruction.
\- Operand(s) - Represents a particular operand of the instruction. In the
| future, there may be subclasses to test the same predicates
| on multiple operands (including for variadic instructions).
\ Operand Predicate(s) - Test the type, register bank, etc. of an operand.
This is where the ComplexPattern equivalent
will be represented. It's also
nested-instruction matching will live as a
predicate that follows the DefUse chain to the
Def and tests a MatcherRule from that position.
Support for multiple instruction matchers in a rule has been retained from
the existing code but has been adjusted to assert when it is used.
Previously it would silently drop all but the first instruction matcher.
The tablegen-erated file is not functionally changed but has more
parentheses and no longer attempts to format the if-statements since
keeping track of the indentation is tricky in the presence of the matcher
hierarchy. It would be nice to have CMakes tablegen() run the output
through clang-format (when available) so we don't have to complicate
TableGen with pretty-printing.
It's also worth mentioning that this hierarchy will also be able to emit
TableGen definitions and test cases in the near future. This is the reason
for favouring explicit emit*() calls rather than the << operator.
Reviewers: aditya_nandakumar, rovka, t.p.northover, qcolombet, ab
Reviewed By: ab
Subscribers: igorb, dberris, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D28942
llvm-svn: 293172
Summary:
Adds a RegisterBank tablegen class that can be used to declare the register
banks and an associated tablegen pass to generate the necessary code.
Changes since first commit attempt:
* Added missing guards
* Added more missing guards
* Found and fixed a use-after-free bug involving Twine locals
Reviewers: t.p.northover, ab, rovka, qcolombet
Reviewed By: qcolombet
Subscribers: aditya_nandakumar, rengolin, kristof.beyls, vkalintiris, mgorny, dberris, llvm-commits, rovka
Differential Revision: https://reviews.llvm.org/D27338
llvm-svn: 292478
Summary:
Adds a RegisterBank tablegen class that can be used to declare the register
banks and an associated tablegen pass to generate the necessary code.
Changes since last commit:
The new tablegen pass is now correctly guarded by LLVM_BUILD_GLOBAL_ISEL and
this should fix the buildbots however it may not be the whole fix. The previous
buildbot failures suggest there may be a memory bug lurking that I'm unable to
reproduce (including when using asan) or spot in the source. If they re-occur
on this commit then I'll need assistance from the bot owners to track it down.
Reviewers: t.p.northover, ab, rovka, qcolombet
Reviewed By: qcolombet
Subscribers: aditya_nandakumar, rengolin, kristof.beyls, vkalintiris, mgorny, dberris, llvm-commits, rovka
Differential Revision: https://reviews.llvm.org/D27338
llvm-svn: 292367
This patch fixes bugzilla 31576 (https://llvm.org/bugs/show_bug.cgi?id=31576).
"data32" instruction prefix was not defined in the llvm.
An exception had to be added to the X86 tablegen and AsmPrinter because both "data16" and "data32" are encoded to 0x66 (but in different modes).
Differential Revision: https://reviews.llvm.org/D28468
llvm-svn: 292352
Summary:
Adds a RegisterBank tablegen class that can be used to declare the register
banks and an associated tablegen pass to generate the necessary code.
Reviewers: t.p.northover, ab, rovka, qcolombet
Subscribers: aditya_nandakumar, rengolin, kristof.beyls, vkalintiris, mgorny, dberris, llvm-commits, rovka
Differential Revision: https://reviews.llvm.org/D27338
llvm-svn: 292132
We were frequently checking for a list of types and the different types
conveyed no real information. So lump them together explicitly.
llvm-svn: 292095
This adds a basic tablegen backend that analyzes the SelectionDAG
patterns to find simple ones that are eligible for GlobalISel-emission.
That's similar to FastISel, with one notable difference: we're not fed
ISD opcodes, so we need to map the SDNode operators to generic opcodes.
That's done using GINodeEquiv in TargetGlobalISel.td.
Otherwise, this is mostly boilerplate, and lots of filtering of any kind
of "complicated" pattern. On AArch64, this is sufficient to match G_ADD
up to s64 (to ADDWrr/ADDXrr) and G_BR (to B).
Differential Revision: https://reviews.llvm.org/D26878
llvm-svn: 290284
Specifically avoid implicit conversions from/to integral types to
avoid potential errors when changing the underlying type. For example,
a typical initialization of a "full" mask was "LaneMask = ~0u", which
would result in a value of 0x00000000FFFFFFFF if the type was extended
to uint64_t.
Differential Revision: https://reviews.llvm.org/D27454
llvm-svn: 289820
clang -target arm deprecated-asm.s -c
deprecated-asm.s:30:9: warning: use of SP or PC in the list is deprecated
stmia r4!, {r12-r14}
We have to have an option what can disable it.
Patched by Yin Ma!
Reviewers: joey, echristo, weimingz
Subscribers: llvm-commits, aemerson
Differential Revision: https://reviews.llvm.org/D27219
llvm-svn: 288734
Bring the sorting check back that I removed in r288655 but put it under
EXPENSIVE_CHECKS this time. Also document that this the check isn't
purely about having a sorted list but also about operator < having the
correct transitive behavior.
Apply the same to the other check in the file.
llvm-svn: 288693
A debug build of AsmMatcherEmitter would use a quadratic algorithm to
check whether std::stable_sort() actually sorted. Let's hope the authors
of our C++ standard library did that testing for us. Removing the check
gives a 3x speedup in the X86 case.
llvm-svn: 288655
Tablegen's -gen-instr-info pass has a bug in its emitEnums() routine.
The function intends for values in a vector to be deduplicated, but it
accidentally skips over elements after performing a deletion.
I think there are smarter ways of doing this deduplication, but we can
do that in a follow-up commit if there's interest. See the thread:
[PATCH] TableGen InstrMapping Bug fix.
Patch by Tyler Kenney!
llvm-svn: 288408
There were several cases in X86 where we were unable to fully factor a ScopeMatcher but created nested ScopeMatchers for some portions of it. Then we created a SwitchType that split it up and further factored it so that we ended up with something like this:
SwitchType
Scope
Scope
Sequence of matchers
Some other sequence of matchers
EndScope
Another sequence of matchers
EndScope
...Next type
This change turns it into this:
SwitchType
Scope
Sequence of matchers
Some other sequence of matchers
Another sequence of matchers
EndScope
...Next type
Several other in-tree targets had similar nested scopes like this. Overall this doesn't save many bytes, but makes the isel output a little more regular.
llvm-svn: 287624
Summary:
For Sparc the namespace (SP) is different from the target name (Sparc),
which causes the name of the array in this declaration to differ from
the name used in the definition.
Patch by Daniel Cederman.
Reviewers: jyknight
Subscribers: llvm-commits, jyknight
Differential Revision: https://reviews.llvm.org/D23650
llvm-svn: 287528
Previously we were factoring when the ScopeMatcher was initially created, but it might get more Matchers added to it later. Delay factoring until we have fully created/populated the ScopeMatchers.
This reduces X86 isel tables by 154 bytes.
llvm-svn: 287520
Summary:
* ARM is omitted from this patch because this check appears to expose bugs in this target.
* Mips is omitted from this patch because this check either detects bugs or deliberate
emission of instructions that don't satisfy their predicates. One deliberate
use is the SYNC instruction where the version with an operand is correctly
defined as requiring MIPS32 while the version without an operand is defined
as an alias of 'SYNC 0' and requires MIPS2.
* X86 is omitted from this patch because it doesn't use the tablegen-erated
MCCodeEmitter infrastructure.
Patches for ARM and Mips will follow.
Depends on D25617
Reviewers: tstellarAMD, jmolloy
Subscribers: wdng, jmolloy, aemerson, rengolin, arsenm, jyknight, nemanjai, nhaehnle, tstellarAMD, llvm-commits
Differential Revision: https://reviews.llvm.org/D25618
llvm-svn: 287439
Summary:
This change is preparation for a change that will allow targets to verify that the instructions
they emit meet the predicates they specify. This is useful to ensure that C++
legalization/lowering/instruction-selection doesn't incorrectly select code for a different
subtarget than intended. Such cases are not caught by the integrated assembler when emitting
instructions directly to an object file.
Reviewers: qcolombet
Subscribers: qcolombet, beanz, mgorny, llvm-commits, modocache
Differential Revision: https://reviews.llvm.org/D25614
llvm-svn: 286945
Suspected to be the cause of a sanitizer-windows bot failure:
Assertion failed: isImm() && "Wrong MachineOperand accessor", file C:\b\slave\sanitizer-windows\llvm\include\llvm/CodeGen/MachineOperand.h, line 420
llvm-svn: 286385
A relocatable immediate is either an immediate operand or an operand that
can be relocated by the linker to an immediate, such as a regular symbol
in non-PIC code.
Start using relocImm for 32-bit and 64-bit MOV instructions, and for operands
of type "imm32_su". Remove a number of now-redundant patterns.
Differential Revision: https://reviews.llvm.org/D25812
llvm-svn: 286384
2 new intrinsics covering AVX-512 compress/expand functionality.
This implementation includes syntax, DAG builder, operation lowering and tests.
Does not include: handling of illegal data types, codegen prepare pass and the cost model.
llvm-svn: 285876
As it stands, the OperandMatchResultTy is only included in the generated
header if there is custom operand parsing. However, almost all backends
make use of MatchOperand_Success and friends from OperandMatchResultTy for
e.g. parseRegister. This is a pain when starting an AsmParser for a new
backend that doesn't yet have custom operand parsing. Move the enum to
MCTargetAsmParser.h.
This patch is a prerequisite for D23563
Differential Revision: https://reviews.llvm.org/D23496
llvm-svn: 285705
The CodeGenSchedModels::checkCompleteness routine in TableGen/
CodeGenSchedule.cpp is supposed to verify for each processor
model that is marked as "complete" that it actually defines a
scheduling class for each instruction.
However, this did not work correctly due to an incorrect
check whether a scheduling class has an itinerary.
Reviewer: atrick
Differential revision: https://reviews.llvm.org/D26156
llvm-svn: 285622
The sanitizer-windows bot turned red with:
FAILED: utils/TableGen/CMakeFiles/obj.llvm-tblgen.dir/IntrinsicEmitter.cpp.obj
C:\PROGRA~2\MICROS~1.0\VC\bin\AMD64_~2\cl.exe ... -c
C:\...\llvm\utils\TableGen\IntrinsicEmitter.cpp
c:\...\llvm\utils\tablegen\intrinsicemitter.cpp(254) :
fatal error C1001: An internal error has occurred in the compiler.
http://lab.llvm.org:8011/builders/sanitizer-windows/builds/114/steps/build%20clang%20lld/logs/stdio
llvm-svn: 285089
Summary:
SetVector already used DenseSet, but SmallSetVector used std::set. This
leads to surprising performance differences. Moreover, it means that
the set of key types accepted by SetVector and SmallSetVector are
quite different!
In order to make this change, we had to convert some callsites that used
SmallSetVector<std::string, N> to use SmallSetVector<CachedHashString, N>
instead.
Reviewers: timshen
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D25648
llvm-svn: 284887
-debug-only=subtarget-emitter prints a lot of machine model diagnostics.
This prunes the output so that the "No machine model for XXX on processor YYY"
only appears when there is definitely no machine model for that opcode.
Previously it was printing that error even if the opcode was covered by
a more general scheduling class.
<rdar://problem/15919845> [TableGen][CodeGenSchedule] Debug output does not help spotting the missing scheduling classes
llvm-svn: 284452
The core of the change is supposed to be NFC, however it also fixes
what I believe was an undefined behavior when calling:
va_start(ValueArgs, Desc);
with Desc being a StringRef.
Differential Revision: https://reviews.llvm.org/D25342
llvm-svn: 283671
descriptions now tag add instructions, and the Hexagon backend is using this to
identify loop induction statements.
Patch by Sam Parker and Sjoerd Meijer.
Differential Revision: https://reviews.llvm.org/D23601
llvm-svn: 281304
Summary:
This allows specifying instructions that are available only in specific assembler variant. If AsmVariantName is specified then instruction will be presented only in MatchTable for this variant. If not specified then assembler variants will be determined based on AsmString.
Also this allows splitting assembler match tables in same way as it is done in dissasembler.
Reviewers: ab, tstellarAMD, craig.topper, vpykhtin
Subscribers: wdng
Differential Revision: https://reviews.llvm.org/D24249
llvm-svn: 280952
This mapping is between pointers, which DenseMap is particularly good
at. Most targets aren't really affected, but if there's a lot of
subregister composition this can shave off a good chunk of time from
generating registers.
llvm-svn: 279875
This tries to keep all the ModRM memory and register forms in their own regions of the encodings. Hoping to make it simple on some of the switch statements that operate on these encodings.
llvm-svn: 279422
Summary:
This is one possible solution to the problem of ignoring constraints that Simon
raised in D21473 but it's a bit of a hack.
The integrated assembler currently ignores violations of the tied register
constraints when the operands involved in a tie are both present in the AsmText.
For example, 'dati $rs, $rt, $imm' with the '$rs = $rt' will silently replace
$rt with $rs. So 'dati $2, $3, 1' is processed as if the user provided
'dati $2, $2, 1' without any diagnostic being emitted.
This is difficult to solve properly because there are multiple parts of the
matcher that are silently forcing these constraints to be met. Tied operands are
rendered to instructions by cloning previously rendered operands but this is
unnecessary because the matcher was already instructed to render the operand it
would have cloned. This is also unnecessary because earlier code has already
replaced the MCParsedOperand with the one it was tied to (so the parsed input
is matched as if it were 'dati <RegIdx 2>, <RegIdx 2>, <Imm 1>'). As a result,
it looks like fixing this properly amounts to a rewrite of the tied operand
handling which affects all targets.
This patch however, merely inserts a checking hook just before the
substitution of MCParsedOperands and the Mips target overrides it. It's not
possible to accurately check the registers are the same this early (because
numeric registers haven't been bound to a register class yet) so it cheats a
bit and checks that the tokens that produced the operand are lexically
identical. This works because tied registers need to have the same register
class but it does have a flaw. It will reject 'dati $4, $a0, 1' for violating
the constraint even though $a0 ends up as the same register as $4.
Reviewers: sdardis
Subscribers: dsanders, llvm-commits, sdardis
Differential Revision: https://reviews.llvm.org/D21994
llvm-svn: 276867
They were all auto-incremented from 0 anyway, and I'm getting really annoying
conflicts and runtime failures when different people add more for GlobalISel
(and even when I'm refactoring my own patches).
NFC.
llvm-svn: 276204
This is for a situation where the encoding for a register may be
different depending on the specific operand. For some instructions,
we want to apply additional restrictions beyond the encoding's
constraints.
In AMDGPU some operands are VSrc_32, using the VS_32 pseudo register
class which accept VGPRs, SGPRs, or immediates in the encoding.
Some specific instructions with the same encoding operand do not want
to allow immediates or SGPRs, but the encoding format is different
in this case than a regular VGPR_32 operand.
This allows specifying the encoding should be treated the same
without introducing yet another dummy register class.
llvm-svn: 275929
This splits out the intrinsic table such that generic intrinsics come
first and target specific intrinsics are grouped by target. From here
we can find out which target an intrinsic is for or differentiate
between generic and target intrinsics.
The motivation here is to make it easier to move target specific
intrinsic handling out of generic code.
llvm-svn: 275575
Summary:
In this patch we implement the following parts of XRay:
- Supporting a function attribute named 'function-instrument' which currently only supports 'xray-always'. We should be able to use this attribute for other instrumentation approaches.
- Supporting a function attribute named 'xray-instruction-threshold' used to determine whether a function is instrumented with a minimum number of instructions (IR instruction counts).
- X86-specific nop sleds as described in the white paper.
- A machine function pass that adds the different instrumentation marker instructions at a very late stage.
- A way of identifying which return opcode is considered "normal" for each architecture.
There are some caveats here:
1) We don't handle PATCHABLE_RET in platforms other than x86_64 yet -- this means if IR used PATCHABLE_RET directly instead of a normal ret, instruction lowering for that platform might do the wrong thing. We think this should be handled at instruction selection time to by default be unpacked for platforms where XRay is not availble yet.
2) The generated section for X86 is different from what is described from the white paper for the sole reason that LLVM allows us to do this neatly. We're taking the opportunity to deviate from the white paper from this perspective to allow us to get richer information from the runtime library.
Reviewers: sanjoy, eugenis, kcc, pcc, echristo, rnk
Subscribers: niravd, majnemer, atrick, rnk, emaste, bmakam, mcrosier, mehdi_amini, llvm-commits
Differential Revision: http://reviews.llvm.org/D19904
llvm-svn: 275367
Ran clang-format to remove the namespace indentation, and stopped
repeating names in doc comments since I was updating every line
anyway.
llvm-svn: 274919
The way the named arguments for various system instructions are handled at the
moment has a few problems:
- Large-scale duplication between AArch64BaseInfo.h and AArch64BaseInfo.cpp
- That weird Mapping class that I have no idea what I was on when I thought
it was a good idea.
- Searches are performed linearly through the entire list.
- We print absolutely all registers in upper-case, even though some are
canonically mixed case (SPSel for example).
- The ARM ARM specifies sysregs in terms of 5 fields, but those are relegated
to comments in our implementation, with a slightly opaque hex value
indicating the canonical encoding LLVM will use.
This adds a new TableGen backend to produce efficiently searchable tables, and
switches AArch64 over to using that infrastructure.
llvm-svn: 274576
Summary:
This complements the earlier addition of IntrWriteMem and IntrWriteArgMem
LLVM intrinsic properties, see D18291.
Also start using the attribute for memset, memcpy, and memmove intrinsics,
and remove their special-casing in BasicAliasAnalysis.
Reviewers: reames, joker.eph
Subscribers: joker.eph, llvm-commits
Differential Revision: http://reviews.llvm.org/D18714
llvm-svn: 274485
The previous code would always do 1 or 2 prefix compares;
explicitly only do one.
This speeds up debug -gen-asm-matcher by ~10% (e.g. X86: 40s -> 35s).
llvm-svn: 273583
Currently isComplete = 1 requires that every instruction must
be described, declared unsupported or marked as having no
scheduling information for a processor.
For some backends such as MIPS, this requirement entails
long regex lists of instructions that are unsupported.
This patch teaches Tablegen to skip over instructions that
are associated with unsupported feature when checking if the
scheduling model is complete.
Patch by: Daniel Sanders
Contributions by: Simon Dardis
Reviewers: MatzeB
Differential Reviewer: http://reviews.llvm.org/D20522
llvm-svn: 273551
looking for it along $PATH. This allows installs of LLVM tools outside of
$PATH to find the symbolizer and produce pretty backtraces if they crash.
llvm-svn: 272232
will appear after a blank. This assumption does not hold in the ARM
target.
Patch by: Roger Ferrer Ibanez
Differential Revision: http://reviews.llvm.org/D20234
llvm-svn: 271666
consider the Predicates attached to InstAlias when generating printAliasInstr.
This forces users of printAliasInstr to check those predicates beforehand.
This commit adds them in the condition set of the IAPrinter object.
Patch by: Roger Ferrer Ibanez
Differential Revision: http://reviews.llvm.org/D20233
llvm-svn: 271665
This means SelectCode unconditionally returns nullptr now. I'll follow
up with a change to make that return void as well, but it seems best
to keep that one very mechanical.
This is part of the work to have Select return void instead of an
SDNode *, which is in turn part of llvm.org/pr26808.
llvm-svn: 269136
Summary:
This change allows to specify "DefaultMethod" for optional operand (IsOptional = 1) in AsmOperandClass that return default value for operand. This is used in convertToMCInst to set default values in MCInst.
Previously if you wanted to set default value for operand you had to create custom converter method. With this change it is possible to use standard converters even when optional operands presented.
Reviewers: tstellarAMD, ab, craig.topper
Subscribers: jyknight, dsanders, arsenm, nhaustov, llvm-commits
Differential Revision: http://reviews.llvm.org/D18242
llvm-svn: 268726
Pattern predicates already appear to be emitted as far down as they can be. The optimization was making no changes on any in-tree target.
llvm-svn: 268705
This opcode never happens in practice, and yet the logic we have in
place to handle it would be undefined behaviour if we ever executed
it. Remove it rather than trying to refactor code that's never
reached.
llvm-svn: 268692
This function performs the reverse computation of
composeSubRegIndexLaneMask().
It will be used in the upcoming "DetectDeadLanes" pass.
llvm-svn: 267849
Previously using lanemasks on registers without any subregisters was not
well defined. This commit extends TargetRegisterInfo/tablegen to:
- Report a lanemask of 1 for regclasses without subregisters
- Do the right thing when mapping a 0/1 lanemask from a class without
subregisters into a class with subregisters in
TargetRegisterInfo::composeSubRegIndexLaneMasks().
This will be used in the upcoming "DetectDeadLanes" patch.
llvm-svn: 267848
Summary:
IntrReadWriteArgMem simply becomes IntrArgMemOnly.
So there are fewer intrinsic properties that express their orthogonality
better, and correspond more closely to the corresponding IR attributes.
Suggested by: Philip Reames
Reviewers: joker.eph, reames, tstellarAMD
Subscribers: jholewinski, arsenm, llvm-commits
Differential Revision: http://reviews.llvm.org/D19291
llvm-svn: 267021
Summary:
LLVMAttribute has outlived its utility and is becoming a problem for C API users that what to use all the LLVM attributes. In order to help moving away from LLVMAttribute in a smooth manner, this diff introduce LLVMGetAttrKindIDInContext, which can be used instead of the enum values.
See D18749 for reference.
Reviewers: Wallbraker, whitequark, joker.eph, echristo, rafael
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D19081
llvm-svn: 266842
Summary:
This property is used to mark an intrinsic that only writes to memory, but
neither reads from memory nor has other side effects.
An example where this is useful is the llvm.amdgcn.buffer.store.format.*
intrinsic, which corresponds to a store instruction that goes through a special
buffer descriptor rather than through a plain pointer.
With this property, the intrinsic should still be handled as having side
effects at the LLVM IR level, but machine scheduling can make smarter
decisions.
Reviewers: tstellarAMD, arsenm, joker.eph, reames
Subscribers: arsenm, llvm-commits
Differential Revision: http://reviews.llvm.org/D18291
llvm-svn: 266826
Removed some unused headers, replaced some headers with forward class declarations.
Found using simple scripts like this one:
clear && ack --cpp -l '#include "llvm/ADT/IndexedMap.h"' | xargs grep -L 'IndexedMap[<]' | xargs grep -n --color=auto 'IndexedMap'
Patch by Eugene Kosov <claprix@yandex.ru>
Differential Revision: http://reviews.llvm.org/D19219
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 266595
This required changing several places to print VT enums as strings instead of raw ints since the proper method to use to print became ambiguous. This is probably an improvement anyway.
This also appears to save ~8K from an x86 self host build of llc.
llvm-svn: 266562
1) We need to add this flag prior to adding any other, in case the user has
specified a -fmodule-cache-path= flag in their custom CXXFLAGS. Such a flag
causes -Werror builds to fail, and thus all config checks fail, until we add
the corresponding -fmodules flag. The modules selfhost bot does this, for
instance.
2) Delete module maps that were putting .cpp files into modules.
3) Enable -fmodules-local-submodule-visibility, to get proper module
visibility rules applied across submodules of the same module. Disable
-fmodules for C builds, since that flag is not available there.
llvm-svn: 266502
Summary: LLVMAttribute has outlived its utility and is becoming a problem for C API users that what to use all the LLVM attributes. In order to help moving away from LLVMAttribute in a smooth manner, this diff introduce LLVMGetAttrKindIDInContext, which can be used instead of the enum values.
Reviewers: Wallbraker, whitequark, joker.eph, echristo
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D18749
llvm-svn: 266257
TableGen checks at compiletime that for scheduling models with
"CompleteModel = 1" one of the following holds:
- Is marked with the hasNoSchedulingInfo flag
- The instruction is a subclass of Sched
- There are InstRW definitions in the scheduling model
Typical steps necessary to complete a model:
- Ensure all pseudo instructions that are expanded before machine
scheduling (usually everything handled with EmitYYY() functions in
XXXTargetLowering).
- If a CPU does not support some instructions mark the corresponding
resource unsupported: "WriteRes<WriteXXX, []> { let Unsupported = 1; }".
- Add missing scheduling information.
Differential Revision: http://reviews.llvm.org/D17747
llvm-svn: 262384
This introduces a new flag that indicates that a specific instruction
will never be present when the MachineScheduler runs and therefore needs
no scheduling information.
This is in preparation for an upcoming commit which checks completeness
of a scheduling model when tablegen runs.
Differential Revision: http://reviews.llvm.org/D17728
llvm-svn: 262383
Previosy, if actual instruction have one of optional operands then other optional operands listed before this also should be presented.
For example instruction v_fract_f32 v0, v1, mul:2 have one optional operand - OMod and do not have optional operand clamp. Previously this was not allowed because clamp is listed before omod in AsmString:
string AsmString = "v_fract_f32$vdst, $src0_modifiers$clamp$omod";
Making this work required some hacks (both OMod and Clamp match classes have same PredicateMethod).
Now, if MatchInstructionImpl meets formal optional operand that is not presented in actual instruction it skips this formal operand and tries to match current actual operand with next formal.
Patch by: Sam Kolton
Review: http://reviews.llvm.org/D17568
[AMDGPU] Assembler: Check immediate types for several optional operands in predicate methods
With this change you should place optional operands in order specified by asm string:
clamp -> omod
offset -> glc -> slc -> tfe
Fixes for several tests.
Depends on D17568
Patch by: Sam Kolton
Review: http://reviews.llvm.org/D17644
llvm-svn: 262314
Krzysztof Parzyszek