Summary:
RK_Pattern results can also have associated declarations e.g. field
decls in constructor initializers.
Reviewers: bkramer
Subscribers: cfe-commits
Differential Revision: https://reviews.llvm.org/D49484
llvm-svn: 337394
Summary: Several tests exist in both lit and lldbsuite. This removes the lit version of the duplicated tests.
Reviewers: asmith, zturner
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D49450
llvm-svn: 337393
This is a follow-up to the rL337171. This patch fixes regression
introduced by the r337171 and enables MipsTruncIntFP pattern.
Differential revision: https://reviews.llvm.org/D49469
llvm-svn: 337392
a Spectre v1 mitigation.
This was initially posted w/ the patch implementing this, got some basic
review there. Also, it is generated from a the Google doc that I shared
as part of the Speculative Load Hardening RFC and which has seen pretty
widespread review at this point.
However, as the patches are landing in LLVM, I wanted to land the docs
as well. But it seemed like a bad idea to have them in the same commit
in case of reverts or other things. So the docs are split out here.
Thanks for all the review so far, and further review and improvements to
the documentation here welcome. Please feel free to keep hammering on
the code review or Google document.
Note that this is a markdown document which Sphinx doesn't yet process.
But we can add support for that after and this should get picked up
(and I'm preparing patches for that). Also, this gets the document
itself into a nice shared place where we can iterate on it.
Differential Revision: https://reviews.llvm.org/D49433
llvm-svn: 337391
Pulled out from D49225, we have a lot of repeated scalar cost calculations, often with arguments that don't look the same but turn out to be.
llvm-svn: 337390
When rL336971 removed the scalar-fp isel patterns, we lost the need for this canonicalization - commutation/folding can handle everything else.
llvm-svn: 337387
ARMSubtarget had a copy/pasted block to determine whether the target was
hard-float, but it just delegated to triple features anyway so it's better at
the TargetMachine level.
llvm-svn: 337384
This patch adds support for the following unpredicated
floating-point instructions:
FADD Floating point add
FSUB Floating point subtract
FMUL Floating point multiplication
FTSMUL Floating point trigonometric starting value
FRECPS Floating point reciprocal step
FRSQRTS Floating point reciprocal square root step
The instructions have the following assembly format:
fadd z0.h, z1.h, z2.h
and have variants for 16, 32 and 64-bit FP elements.
llvm-svn: 337383
Currently, getFdePC() returns uint64_t. Its because the following
encodings might use 8 bytes: DW_EH_PE_absptr and DW_EH_PE_udata8.
But caller assigns returned value to uint32_t field:
https://github.com/llvm-mirror/lld/blob/master/ELF/SyntheticSections.cpp#L508
Value is used for building .eh_frame_hdr section.
We use DW_EH_PE_sdata4 encoding for building it at this moment:
https://github.com/llvm-mirror/lld/blob/master/ELF/SyntheticSections.cpp#L2545
And that means that an overflow issue might happen if
DW_EH_PE_absptr/DW_EH_PE_udata8 address encodings are present
in .eh_frame. In that case, before this patch, we silently would
truncate the address and produced broken .eh_frame_hdr section.
It would be not hard to support real 64-bit values for
DW_EH_PE_absptr/DW_EH_PE_udata8 encodings, but it is
unclear if it is usefull and if we should do it.
Since nobody faced/reported it, int this patch I only implement
a check to stop producing broken output silently for now.
llvm-svn: 337382
While working on PR38197, I noticed that we don't make use of FADD/FMUL being able to commute the inputs to support the addps+movss -> addss style combine
llvm-svn: 337375
This reverts commit 55222c9183c6e07f53a54c4061677734f54feac1.
I missed that this patch has a dependency on https://reviews.llvm.org/D49219
that has not been approved yet.
llvm-svn: 337373
The signed/unsigned DOT instructions perform a dot-product on
quadtuplets from two source vectors and accumulate the result in
the destination register. The instructions come in two forms:
Vector form, e.g.
sdot z0.s, z1.b, z2.b - signed dot product on four 8-bit quad-tuplets,
accumulating results in 32-bit elements.
udot z0.d, z1.h, z2.h - unsigned dot product on four 16-bit quad-tuplets,
accumulating results in 64-bit elements.
Indexed form, e.g.
sdot z0.s, z1.b, z2.b[3] - signed dot product on four 8-bit quad-tuplets
with specified quadtuplet from second
source vector, accumulating results in 32-bit
elements.
udot z0.d, z1.h, z2.h[1] - dot product on four 16-bit quad-tuplets
with specified quadtuplet from second
source vector, accumulating results in 64-bit
elements.
llvm-svn: 337372
Summary: This is how it appears to be handled in GCC and it prevents a
"Unknown mismatch" error in the SelectionDAGBuilder.
Reviewers: venkatra, jyknight, jrtc27
Reviewed By: jyknight, jrtc27
Subscribers: eraman, fedor.sergeev, jrtc27, llvm-commits
Differential Revision: https://reviews.llvm.org/D49218
llvm-svn: 337370
This patch adds the following predicated instructions:
UDIV Unsigned divide active elements
UDIVR Unsigned divide active elements, reverse form.
SDIV Signed divide active elements
SDIVR Signed divide active elements, reverse form.
e.g.
udiv z0.s, p0/m, z0.s, z1.s
(unsigned divide active elements in z0 by z1, store result in z0)
sdivr z0.s, p0/m, z0.s, z1.s
(signed divide active elements in z1 by z0, store result in z0)
llvm-svn: 337369
Summary:
When building out-of-tree tools, there are several macros available to
automate linking against llvm. An examples is `add_llvm_executable`, or
the clang variant of this.
These macros use the LLVM_LINK_LLVM_DYLIB option to decide whether to
link against libraries defined by setting LLVM_LINK_COMPONENTS or to
link against libLLVM instead. Currently this is problematic in
out-of-tree targets, because they cannot identify whether this option is
required or even available. If the option was enabled in LLVM's own
build, the clang libraries are built against libLLVM, so a client
linking against those must link against it too. On the other hand the
client can't just always link against it, because it might not be
available.
This is related to D44391, but that change assumed the client knew
whether they wanted the dylib or not.
Reviewers: mgorny, beanz, labath
Reviewed By: mgorny
Subscribers: bollu, llvm-commits
Differential Revision: https://reviews.llvm.org/D49193
llvm-svn: 337366
This is a part of ttps://bugs.llvm.org//show_bug.cgi?id=38119
We produce broken ELF header now when the number of output sections is >= SHN_LORESERVE (0xff00).
ELF spec says (http://www.sco.com/developers/gabi/2003-12-17/ch4.eheader.html):
e_shnum:
If the number of sections is greater than or equal to SHN_LORESERVE (0xff00), this member has the value zero
and the actual number of section header table entries is contained in the sh_size field of the section header at index 0.
(Otherwise, the sh_size member of the initial entry contains 0.)
e_shstrndx
If the section name string table section index is greater than or equal to SHN_LORESERVE (0xff00), this member has the
value SHN_XINDEX (0xffff) and the actual index of the section name string table section is contained in the sh_link field of
the section header at index 0. (Otherwise, the sh_link member of the initial entry contains 0.)
We did not set these fields correctly earlier. The patch fixes the issue.
Differential revision: https://reviews.llvm.org/D49371
llvm-svn: 337363
Imagine we have a file with few sections, and one of them is .foo
with index N != 0.
Problem is that when llvm-objdump is given a -section=.foo parameter
it lists .foo as a section at index 0. That makes impossible to write
test cases which needs to find the index of the particular section,
while ignoring dumping of others.
The patch fixes that.
Differential revision: https://reviews.llvm.org/D49372
llvm-svn: 337361
http://www.sco.com/developers/gabi/2003-12-17/ch4.eheader.html
says that e_shnum and/or e_shstrndx may have special values if
"the number of sections is greater than or equal to SHN_LORESERVE" or
"the section name string table section index is greater than or equal to SHN_LORESERVE (0xff00)"
Previously llvm-readobj was unable to dump such files, patch changes that.
I had to add a precompiled test case because it does not seem possible to
prepare a test using yaml2obj or llvm-mc (not clear how to make .shstrtab
to have index >= SHN_LORESERVE).
Differential revision: https://reviews.llvm.org/D49369
llvm-svn: 337360
This patch adds the following instructions:
MUL - multiply vectors, e.g.
mul z0.h, p0/m, z0.h, z1.h
- multiply with immediate, e.g.
mul z0.h, z0.h, #127
SMULH - signed multiply returning high half, e.g.
smulh z0.h, p0/m, z0.h, z1.h
UMULH - unsigned multiply returning high half, e.g.
umulh z0.h, p0/m, z0.h, z1.h
llvm-svn: 337358
In revision r336569 (D49036) libomptarget support for multiple nvidia images
has been fixed in case a target region resides inside one or multiple
libraries and in the compiled application. But the issues is still present
for elf images.
This fix will also support multiple images for elf.
Patch by Jannis Klinkenberg
Reviewers: protze.joachim, ABataev, grokos
Reviewed By: protze.joachim, ABataev, grokos
Subscribers: openmp-commits
Differential Revision: https://reviews.llvm.org/D49418
llvm-svn: 337355
This patch improves traceability of duplicated header files which end
up in multiple pcms.
Differential Revision: https://reviews.llvm.org/D47118
llvm-svn: 337353
* Delete a no-longer-used override, and mark the other
getRegisterTypeForCallingConv() as override.
* SPE only supports i32, not i64, as the internal type, so simply remove
the type check, so that DestReg and Opc are provably always set.
GCC 6.4 did not warn about either of the above.
llvm-svn: 337350
The X86ISD::MOVLHPS/MOVHLPS should now only be emitted in SSE1 only. This means that the v2i64/v2f64 types would be illegal thus we don't need these patterns.
llvm-svn: 337349
I'm trying to restrict the MOVLHPS/MOVHLPS ISD nodes to SSE1 only. With SSE2 we can use unpcks. I believe this will allow some patterns to be cleaned up to require fewer bitcasts.
I've put in an odd isel hack to still select MOVHLPS instruction from the unpckh node to avoid changing tests and because movhlps is a shorter encoding. Ideally we'd do execution domain switching on this, but the operands are in the wrong order and are tied. We might be able to try a commute in the domain switching using custom code.
We already support domain switching for UNPCKLPD and MOVLHPS.
llvm-svn: 337348
Summary:
The Signal Processing Engine (SPE) is found on NXP/Freescale e500v1,
e500v2, and several e200 cores. This adds support targeting the e500v2,
as this is more common than the e500v1, and is in SoCs still on the
market.
This patch is very intrusive because the SPE is binary incompatible with
the traditional FPU. After discussing with others, the cleanest
solution was to make both SPE and FPU features on top of a base PowerPC
subset, so all FPU instructions are now wrapped with HasFPU predicates.
Supported by this are:
* Code generation following the SPE ABI at the LLVM IR level (calling
conventions)
* Single- and Double-precision math at the level supported by the APU.
Still to do:
* Vector operations
* SPE intrinsics
As this changes the Callee-saved register list order, one test, which
tests the precise generated code, was updated to account for the new
register order.
Reviewed by: nemanjai
Differential Revision: https://reviews.llvm.org/D44830
llvm-svn: 337347
This is the lead-up to having SPE codegen. Add the rest of the
instructions, along with MC tests.
Differential Revision: https://reviews.llvm.org/D44829
llvm-svn: 337346
Eric Liu