The intention is not to allow stop-hook commands to query the
user, so this is correct. It also works around a deadlock in
switching to the Python Session to execute python based commands
in the stop hook when the Debugger stdin is backed by a FILE *.
Differential Revision: https://reviews.llvm.org/D90332
This preprocessor define was meant to be used to conditionally include VCSVersion.inc. However, the define was always set, and it was the content of the header that was conditionally generated. Therefore HAVE_VCS_VERSION_INC should be cleaned up.
Reviewed By: gribozavr2, MaskRay
Differential Revision: https://reviews.llvm.org/D84623
This fixes an flakyness is all gdb-remote tests. These tests have been
(mildly) flaky since we started using "localhost" instead of 127.0.0.1
in the test suite. The reason is that lldb-server needs to create two
sockets (v4 and v6) to listen for localhost connections. The algorithm
it uses first tries to select a random port (bind(localhost:0)) for the
first address, and then bind the same port for the second one.
The creating of the second socket can fail as there's no guarantee that
port will be available -- it seems that the (linux) kernel tries to
choose an unused port for the first socket (I've had to create thousands
of sockets to reproduce this reliably), but this can apparantly fail
when the system is under load (and our test suite creates a _lot_ of
sockets).
The socket creationg operation is considered successful if it creates at
least one socket is created, but the test harness has no way of knowing
which one it is, so it can end up connecting to the wrong address.
I'm not aware of a way to atomically create two sockets bound to the
same port. One way to fix this would be to make lldb-server report the
address is it listening on instead of just the port. However, this would
be a breaking change and it's not clear to me that's worth it (the
algorithm works pretty well under normal circumstances).
Instead, this patch sidesteps that problem by using "reverse"
connections. This way, the test harness is responsible for creating the
listening socket so it can pass the address that it has managed to open.
It also results in much simpler code overall.
To preserve test coverage for the named pipe method, I've moved the
relevant code to a dedicated test. To avoid original problem, this test
passes raw addresses (as obtained by getaddrinfo(localhost)) instead of
"localhost".
Differential Revision: https://reviews.llvm.org/D90313
We're no longer convinced that this is needed and we have no test
coverage to disprove that. Backing out of this change until we're
convinced otherwise.
Make it possible to use a relative path in command script import to the
location of the file being sourced. This allows the user to put Python
scripts next to LLDB command files and importing them without having to
specify an absolute path.
To enable this behavior pass `-c` to `command script import`. The
argument can only be used when sourcing the command from a file.
rdar://68310384
Differential revision: https://reviews.llvm.org/D89334
The number of resumes should always be positive to let's make this an
unsigned everywhere. Also remove the unused 'localhost' parameter from
ConvertArgumentsForLaunchingInShell.
Replace the inline x86 watchpoint handling code with the reusable
NativeRegisterContextWatchpoint_x86. Implement watchpoint support
in NativeThreadFreeBSD and SIGTRAP handling for watchpoints.
Un-skip all concurrent_events tests as they pass with the new plugin.
Differential Revision: https://reviews.llvm.org/D90102
The statement that lldb-server can handle
decimal and hex numbers is misleading.
(it can only handle hex with 0x prefix)
Mentioning non decimal numbers at all
is just creating more confusion for anyone
who tries to use them with lldb-server.
Differential Revision: https://reviews.llvm.org/D89383
TestQuoting's different test methods all build their own test binaries but
we can just reuse the same test binary by merging all asserts into one method.
This reduces the test runtime from 8 seconds to 4 seconds on my machine.
This also removes the ability to have partial failures in this test, but given
how rarely this code is touched this seems like a fair tradeoff (and we will be
able to re-add this feature once we updated our test framework).
Some other small changes:
* Fixed that we cleanup "stdout.txt" instead of "output.txt" in the cleanup.
* Fixed some formatting issues.
* Call `build` instead of directly calling `buildDefault`.
clang supports option -fsplit-machine-functions and this test checks if the
backtraces are sane when functions are split.
With -fsplit-machine-functions, a function with profiles can get split into 2
parts, the original function containing hot code and a cold part as determined
by the profile info and the cold cutoff threshold.. The cold part gets the
".cold" suffix to disambiguate its symbol from the hot part and can be placed
arbitrarily in the address space.
This test checks if the back-trace looks correct when the cold part is executed.
Differential Revision: https://reviews.llvm.org/D90081
Displaying large packed bitfields did not work if one was accessing them
through a pointer, and he used the "->" notation ("[0]." notation is
fine). The reason for that is that implicit dereference in -> is plumbed
all the way down to ValueObjectChild::UpdateValue, where the process of
fetching the child value was forked for this flag. The bitfield
"sliding" code was implemented only for the branch which did not require
dereferencing.
This patch restructures the function to avoid this mistake. Processing
now happens in two stages.
- first the parent is dereferenced (if needed)
- then the child value is computed (this step includes sliding and is
common for both branches)
Differential Revision: https://reviews.llvm.org/D89236
Ensure that xs_xstate_bv is set correctly before calling
WriteRegisterSet(). The bit can be clear if the relevant registers
were at their initial state when they were read, and it needs to be set
in order to apply changes from the XState structure.
Differential Revision: https://reviews.llvm.org/D90105
Reset registers to their 'initial' state instead of a semi-random
pattern in write tests. While the latter might have been helpful
while debugging failures (i.e. to distinguish unmodified registers
from mistakenly written zeroes), the former makes it possible to test
whether xstate_bv field is written correctly when using XSAVE.
With this change, the four relevant tests start failing on NetBSD
without D90105.
Differential Revision: https://reviews.llvm.org/D90114
Unify the x86 regset API to use XStateRegSet for all FPU registers,
therefore eliminating the legacy API based on FPRegSet. This makes
the code a little bit simpler but most notably, it provides future
compatibility for register caching.
Since the NetBSD kernel takes care of providing compatibility with
pre-XSAVE processors, PT_{G,S}ETXSTATE can be used on systems supporting
only FXSAVE or even plain FSAVE (and unlike PT_{G,S}ETXMMREGS, it
clearly indicates that XMM registers are not supported).
Differential Revision: https://reviews.llvm.org/D90034
As mentioned in the comment inside the code, the Intel documentation
states that the internal CPU buffer is flushed out to RAM only when tracing is
disabled. Otherwise, the buffer on RAM might be stale.
This diff disables tracing when the trace buffer is going to be read. This is a
quite safe operation, as the reading is done when the inferior is paused at a
breakpoint, so we are not losing any packets because there's no code being
executed.
After the reading is finished, tracing is enabled back.
It's a bit hard to write a test for this now, but Greg Clayton and I will
refactor the PT support and writing tests for it will be easier. However
I tested it manually by doing a script that automates
the following flow
```
(lldb) b main
Breakpoint 1: where = a.out`main + 15 at main.cpp:4:7, address = 0x000000000040050f
(lldb) r
Process 3078226 stopped
* thread #1, name = 'a.out', stop reason = breakpoint 1.1
frame #0: 0x000000000040050f a.out`main at main.cpp:4:7
(lldb) processor-trace start
(lldb) b 5
Breakpoint 2: where = a.out`main + 22 at main.cpp:5:12, address = 0x0000000000400516
(lldb) c
Process 3078226 resuming
Process 3078226 stopped
* thread #1, name = 'a.out', stop reason = breakpoint 2.1
frame #0: 0x0000000000400516 a.out`main at main.cpp:5:12
(lldb) processor-trace show-instr-log
thread #1: tid=3078226
0x40050f <+15>: movl $0x0, -0x8(%rbp)
>>> Before, some runs of the script up to this point lead to empty traces
(lldb) b 6
Breakpoint 3: where = a.out`main + 42 at main.cpp:6:14, address = 0x000000000040052a
(lldb) c
Process 3092991 resuming
Process 3092991 stopped
* thread #1, name = 'a.out', stop reason = breakpoint 3.1
frame #0: 0x000000000040052a a.out`main at main.cpp:6:14
(lldb) processor-trace show-instr-log thread #1: tid=3092991
0x40050f <+15>: movl $0x0, -0x8(%rbp)
0x400516 <+22>: movl $0x0, -0xc(%rbp)
0x40051d <+29>: cmpl $0x2710, -0xc(%rbp) ; imm = 0x2710
0x400524 <+36>: jge 0x400546 ; <+70> at main.cpp
0x400524 <+36>: jge 0x400546 ; <+70> at main.cpp
>>> The trace was re-enabled correctly and includes the instruction of the
first reading.
```
Those instructions correspond to these lines
```
3 int main() {
4 int z = 0;
5 for (int i = 0; i < 10000; i++) {
6 z += fun(z)
...
```
Differential Revision: https://reviews.llvm.org/D85241
For performance reasons the reproducers don't copy the files captured by
the file collector eagerly, but wait until the reproducer needs to be
generated.
This is a problematic when LLDB crashes and we have to do all this
signal-unsafe work in the signal handler. This patch uses a similar
trick to clang, which has the driver invoke a new cc1 instance to do all
this work out-of-process.
This patch moves the writing of the mapping file as well as copying over
the reproducers into a separate process spawned when lldb crashes.
Differential revision: https://reviews.llvm.org/D89600
We were returning the default constructed unique_pointer from
TypeSystem.h for which the compiler does not have a definition. Move the
implementation into the cpp file.
This patch redesigns the Target::GetUtilityFunctionForLanguage API:
- Use a unique_ptr instead of a raw pointer for the return type.
- Wrap the result in an llvm::Expected instead of using a Status object as an I/O parameter.
- Combine the action of "getting" and "installing" the UtilityFunction as they always get called together.
- Pass std::strings instead of const char* and std::move them where appropriate.
There's more room for improvement but I think this tackles the most
prevalent issues with the current API.
Differential revision: https://reviews.llvm.org/D90011
Split the current NetBSD watchpoint implementation for x86 into Utility,
and revamp it to improve readability. This code is meant to be used
as a common class for all x86 watchpoint implementation, particularly
these on FreeBSD and Linux.
The code uses global watchpoint enable bits, as required by the NetBSD
kernel. If it ever becomes necessary for any platform to use local
enable bits instead, this can be trivially abstracted out.
The code also postpones clearing DR6 until a new different watchpoint
is being set in place of the old one. This is necessary since LLDB
repeatedly reenables watchpoints on all threads, by clearing
and restoring them. When DR6 is cleared as a part of that, then pending
events on other threads can no longer be associated with watchpoints
correctly.
Differential Revision: https://reviews.llvm.org/D89874
The UtilityFunction ctor was dropping the text argument. Probably for
that reason ClangUtilityFunction was setting the parent's member
directly instead of deferring to the parent ctor. Also change the
signatures to take strings which are std::moved in place.
This patch completes https://reviews.llvm.org/D83560. Now that the
compiler can emit `DW_OP_implicit_value` into DWARF expressions, lldb
needed to learn reading these opcodes for variable inspection and
expression evaluation.
This implicit location descriptor specifies an immediate value with two
operands: the length (ULEB128) followed by a block representing the value
in the target memory representation.
rdar://67406091
Differential revision: https://reviews.llvm.org/D89842
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
In a new Range class was introduced to simplify and the Disassembler API
and reduce duplication. It unintentionally broke the
SBFrame::Disassemble functionality because it unconditionally converts
the number of instructions to a Range{Limit::Instructions,
num_instructions}. This is subtly different from the previous behavior,
where now we're passing a Range and assume it's valid in the callee, the
original code would propagate num_instructions and the callee would
compare the value and decided between disassembling instructions or
bytes.
Unfortunately the existing tests was not particularly strict:
disassembly = frame.Disassemble()
self.assertNotEqual(len(disassembly), 0, "Disassembly was empty.")
This would pass because without this patch we'd disassemble zero
instructions, resulting in an error:
(lldb) script print(lldb.frame.Disassemble())
error: error reading data from section __text
Differential revision: https://reviews.llvm.org/D89925
This test checks that the output of `SBTarget.GetDescription()` contains the
substrings `'a.out', 'Target', 'Module', 'Breakpoint'` in that order. This test
is currently failing on Apple simulators as apparently 'Module' can't be found
in the output after 'Target".
The reason for that is that the actual output of `SBTarget.GetDescription()` looks like this:
```
Target
Module /build/path/lldb-test-build.noindex/python_api/target/TestTargetAPI.test_get_description_dwarf/a.out
0x7ff2b6d3f990: ObjectFileMachO64, file = /build/path/lldb-test-build.noindex/python_api/target/TestTargetAPI.test_get_description
[...]
0x7ff307150000: BreakpointList with 0 Breakpoints:
<LLDB module output repeats for each loaded module>
```
Clearly the string order should be `'Target', 'Module', 'a.out', 'Breakpoint'`.
However, LLDB is also a bunch of system shared libraries (libxpc.dylib,
libobjc.A.dylib, etc.) when *not* running against a simulator, we end up
unintentionally finding the `'Target', 'Module', 'Breakpoint'` substrings in the
trailing descriptions of the system modules. When running against a simulator we
however don't load shared system libraries.
This patch just moves the substrings in the correct order to make this test pass
without having any shared library modules in the description output.
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D89698
The Darwin builder currently assumes in `getArchCFlags` that the passed `arch`
value is an actual string it can string.join with vendor/os/version/env strings:
```
triple = '-'.join([arch, vendor, os, version, env])
```
However this is not true for most tests as we just pass down the `arch=None`
default value from `TestBase.build`. This causes that if we actually end up in
this function we just error out when concatenating `None` with the other actual
strings of vendor/os/version/env. What we should do instead is check that if
there is no test-specific architecture that we fall back to the configuration's
architecture value.
It seems we already worked around this in `builder.getArchSpec` by explicitly
falling back to the architecture specified in the configuration.
This patch just moves this fallback logic to the top `build` function so that it
affects all functions called from `TestBase.build`.
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D89056
Jonas Devlieghere