Summary:
The std::call_once implementation in libstdc++ has problems on few systems: NetBSD, OpenBSD and Linux PPC. LLVM ships with a homegrown implementation llvm::call_once to help on these platforms.
This change is required in the NetBSD LLDB port. std::call_once with libstdc++ results with crashing the debugger.
Sponsored by <The NetBSD Foundation>
Reviewers: labath, joerg, emaste, mehdi_amini, clayborg
Reviewed By: labath, clayborg
Subscribers: #lldb
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D29288
llvm-svn: 294202
Summary:
Per discussion in D28616, having two ways two request logging (log
enable lldb XXX verbose && log enable -v lldb XXX) is confusing. This
removes the first option and standardizes all code to use the second
one.
I've added a LLDB_LOGV macro as a shorthand for if(log &&
log->GetVerbose()) and switched most of the affected log statements to
use that (I've only left a couple of cases that were doing complex
computations in an if(log) block).
Reviewers: jingham, zturner
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D29510
llvm-svn: 294113
This moves the following classes from Core -> Utility.
ConstString
Error
RegularExpression
Stream
StreamString
The goal here is to get lldbUtility into a state where it has
no dependendencies except on itself and LLVM, so it can be the
starting point at which to start untangling LLDB's dependencies.
These are all low level and very widely used classes, and
previously lldbUtility had dependencies up to lldbCore in order
to use these classes. So moving then down to lldbUtility makes
sense from both the short term and long term perspective in
solving this problem.
Differential Revision: https://reviews.llvm.org/D29427
llvm-svn: 293941
Summary:
This patch adds accurate dependency specifications to the mail LLDB libraries and tools.
In all cases except lldb-server, these dependencies are added in addition to existing dependencies (making this low risk), and I performed some code cleanup along the way.
For lldb-server I've cleaned up the LLVM dependencies down to just the minimum actually required. This is more than lldb-server actually directly references, and I've left a todo in the code to clean that up.
Reviewers: labath, zturner
Subscribers: lldb-commits, danalbert, srhines, ki.stfu, mgorny, jgosnell
Differential Revision: https://reviews.llvm.org/D29333
llvm-svn: 293686
header line, backtrace output) was to remove the current pc value
from frames where we have source level information. We've been
discussing this for the past week and based on input from a group
of low level users, I believe this is the wrong default behavior
for the command line lldb tool.
lldb's backtrace will include the pc value for all stack frames
regardless of whether they have source level debug information or
not.
A related part of r286288 removes the byte offset printing for
functions with source level information (e.g. "main + 22 sourcefile.c:10"
is printed as "main sourcefile.c:10"). I don't see a compelling
case for changing this part of 286288 so I'm leaving that as-is
(in addition to the rest of 286288 which is clearly better than
the previous output style).
<rdar://problem/30083904>
llvm-svn: 293366
Summary: This commit adds an option to set PC to the entry point of the file loaded using "target module load" command. In D28804, Greg asked me to separate this part under a different option.
Reviewers: clayborg
Reviewed By: clayborg
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D28944
llvm-svn: 292989
For bare-metal targets, lldb was missing a command like 'load' in gdb
which can be used to create executable image on the target. This was
discussed in
http://lists.llvm.org/pipermail/lldb-dev/2016-December/011752.html
This commits adds an option to "target module load" command to provide
that functionality. It does not set the PC to entry address which will
be done separately.
Reviewed in https://reviews.llvm.org/D28804
llvm-svn: 292499
This adds the LLDB_LOG macro, which enables one to write more succinct log
statements.
if (log)
log->Printf("log something: %d", var);
becomes
LLDB_LOG(log, "log something: {0}, var);
The macro still internally does the "if(log)" dance, so the arguments are only
evaluated if logging is enabled, meaning it has the same overhead as the
previous syntax.
Additionally, the log statements will be automatically prefixed with the file
and function generating the log (if the corresponding new argument to the "log
enable" command is enabled), so one does not need to manually specify this in
the log statement.
It also uses the new llvm formatv syntax, which means we don't have to worry
about PRIx64 macros and similar, and we can log complex object (llvm::StringRef,
lldb_private::Error, ...) more easily.
Differential Revision: https://reviews.llvm.org/D27459
llvm-svn: 292360
Summary:
I came across this while trying to understand what Log::Debug does. It turns out
it does not do anything, as there is no instance of someone setting a debug flag
on a stream. The same is true for the Verbose and AddPrefix flags. Removing
these will enable some cleanups in the Logging class, and it brings us closer
towards the long term goal of standardizing on llvm stream classes.
I have removed these flags and all code the code which tested for their
presence -- there wasn't much of it, mostly in SymbolFileDWARF, which is
probably going away at some point anyway.
The eBinary flag still has some users, so I am letting it life for the time
being.
Reviewers: clayborg, zturner
Subscribers: aprantl, beanz, lldb-commits
Differential Revision: https://reviews.llvm.org/D28616
llvm-svn: 291895
Previously it failed to handle nested types inside templated classes
making it impossible to look up these types using the fully qualified
name.
Differential revision: https://reviews.llvm.org/D28466
llvm-svn: 291559
Also found/fixed one bug identified by this warning in
RenderScriptx86ABIFixups.cpp where a string literal was being used in an
effort to provide a name for an instruction/register, but was instead
being passed as the bool 'isVolatile' parameter.
llvm-svn: 291198
This is a redux of [Ewan's patch](https://reviews.llvm.org/D17957) , refactored
to properly substitute primitive types using a hook in the itanium demangler,
and updated after the previous patch went stale
The new `SubsPrimitiveParmItanium` function takes a symbol name and replacement
primitive type parameter as before but parses it using the FastDemangler, which
has been modified to be able to notify clients of parse events (primitive types
at this point).
Additionally, we now use a `set` of `ConstStrings` instead of a `vector` so
that we don't try and resolve the same invalid candidate multiple times.
Differential Revision: https://reviews.llvm.org/D27223
Subscribers: lldb-commits
llvm-svn: 290117
This adds formatv-backed formatting functions in various
places in LLDB such as StreamString, logging, constructing
error messages, etc. A couple of callsites are changed
from Printf style syntax to formatv style syntax to
illustrate its usage. Additionally, a FileSpec formatter
is introduced so that FileSpecs can be formatted natively.
Differential Revision: https://reviews.llvm.org/D27632
llvm-svn: 289922
Summary: I was building lldb using cross mingw-w64 toolchain on Linux and observed some issues. This is first patch in the series to fix that build. It mostly corrects the case of include files and adjusts some #ifdefs from _MSC_VER to _WIN32 and vice versa. I built lldb on windows with VS after applying this patch to make sure it does not break the build there.
Reviewers: zturner, labath, abidh
Subscribers: ki.stfu, mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D27759
llvm-svn: 289821
At least the plugin used by the LibreOffice build
(<https://wiki.documentfoundation.org/Development/Clang_plugins>) indirectly
uses those members (through inline functions in LLVM/Clang include files in turn
using them), but they are not exported by utils/extract_symbols.py on Windows,
and accessing data across DLL/EXE boundaries on Windows is generally
problematic.
Differential Revision: https://reviews.llvm.org/D26671
llvm-svn: 289647
Summary:
Communication classes use the Timeout<> class to specify the timeout. Listener
class was converted to chrono some time ago, but it used a different meaning for
a timeout of zero (Listener: infinite wait, Communication: no wait). Instead,
Listener provided separate functions which performed a non-blocking event read.
This converts the Listener class to the new Timeout class, to improve
consistency. It also allows us to get merge the different GetNextEvent*** and
WaitForEvent*** functions into one. No functional change intended.
Reviewers: jingham, clayborg, zturner
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D27136
llvm-svn: 288238
Summary:
This class is unused, and since the StringRef refactor, it does not even
implement the Connection interface.
Reviewers: clayborg, jingham
Subscribers: mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D27134
llvm-svn: 288117
The conditional expression is ambiguous there, so help it by explicitly casting.
This will go away once we use chrono all the way down.
llvm-svn: 287921
This replaces the raw integer timeout parameters in the class with their
chrono-based equivalents. To achieve this, I have moved the Timeout class to a
more generic place and added a quick unit test for it.
llvm-svn: 287920
This concludes the changes I originally tried to make and then
had to back out. This way if anything is still broken, it
should be easier to bisect it back to a more specific changeset.
llvm-svn: 287367
The scanning algorithm had a few little subtleties that I
overlooked, but this patch should fix everything.
I still haven't changed the function to take a StringRef since
that has some trickle down effect and is mostly mechanical,
I just wanted to get the tricky part as isolated as possible.
llvm-svn: 287354
This argument was only used in one place in the codebase, and
it was in a non-critical log statement and can be easily
substituted for an equally meaningful field instead. The
payoff of computing this value is not worth the added
complexity.
llvm-svn: 287315
Apparently these two enormous functions were dead. Which is
good, since one was largely a copy of another function with
only a few minor tweaks.
llvm-svn: 287308
Originally I converted this entire function and all dependents
to use StringRef, but there were some test failures that
were tricky to track down, as this is a complicated function.
So I'm starting over, this time in smaller increments.
llvm-svn: 287307
In the process, found some functions that were duplicates of
existing StringRef member functions. So deleted those functions
and used the StringRef functions instead.
llvm-svn: 287279
This was a bit tricky, especially for things like
OptionValueArray and OptionValueDictionary since they do some
funky string parsing. Rather than try to re-write line-by-line
I tried to make the StringRef usage idiomatic, even though
it meant often re-writing from scratch large blocks of code
in a different way while keeping true to the original intent.
The finished code is a big improvement though, and often much
shorter than the original code. All tests and unit tests
pass on Windows and Linux.
llvm-svn: 287242
This is a large API change that removes the two functions from
StreamString that return a std::string& and a const std::string&,
and instead provide one function which returns a StringRef.
Direct access to the underlying buffer violates the concept of
a "stream" which is intended to provide forward only access,
and makes porting to llvm::raw_ostream more difficult in the
future.
Differential Revision: https://reviews.llvm.org/D26698
llvm-svn: 287152
This is forcing to use Error::success(), which is in a wide majority
of cases a lot more readable.
Differential Revision: https://reviews.llvm.org/D26481
llvm-svn: 286561
Summary:
The only interesting part here is that TimePoint and TimeValue have different
natural string representations, which affects "target modules list" output. It
is now "2016-07-09 04:02:21.000000000", whereas previously in was
"Sat Jul 9 04:02:21 2016". I wanted to check if we're OK with that.
Reviewers: clayborg
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D26275
llvm-svn: 286349
I added a "thread-stop-format" to distinguish between the form
that is just the thread info (since the stop printing immediately prints
the frame info) and one with more frame 0 info - which is useful for
"thread list" and the like.
I also added a frame.no-debug boolean to the format entities so you can
print frame information differently between frames with source info and those
without.
This closes https://reviews.llvm.org/D26383.
<rdar://problem/28273697>
llvm-svn: 286288
This makes the logic easier to follow and also propagates
StringRef up to the API boundary, which is necessary for
making higher up StringRef API changes.
Differential Revision: https://reviews.llvm.org/D26325
llvm-svn: 286204
Summary:
While removing TimeValue from this class I noticed a lot of room for small
simplifications here. Main are:
- instead of complicated start-stop dances to compute own time, each Timer
just starts the timer once, and keeps track of the durations of child
timers. Then the own time can be computed at the end by subtracting the two
values.
- remove double accounting in TimerStack - the stack object already knows the
number of timers.
The interface does not lend itself well to unit testing, but I have added a
couple of tests which can (and did) catch any obvious errors.
Reviewers: tberghammer, clayborg
Subscribers: mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D26243
llvm-svn: 285890
Summary:
The only usage there was in GetModificationTime(). I also took the opportunity
to move this function from FileSpec to the FileSystem class - since we are
using FileSpecs to also represent remote files for which we cannot (easily)
retrieve modification time, it makes sense to make the decision to get the
modification time more explicit.
The new function returns a llvm::sys::TimePoint<>. To aid the transition
from TimeValue, I have added a constructor to it which enables implicit
conversion from a time_point.
Reviewers: zturner, clayborg
Subscribers: mehdi_amini, tberghammer, danalbert, beanz, mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D25392
llvm-svn: 285702
This is better for a number of reasons. Mostly style, but also:
1) Signed-unsigned comparison warnings disappear since there is
no loop index.
2) Iterating with the range-for style gives you back an entry
that has more than just a const char*, so it's more efficient
and more useful.
3) Makes code safter since the type system enforces that it's
impossible to index out of bounds.
llvm-svn: 283413
There were a number of issues with the Args class preventing
efficient use of strings and incoporating LLVM's StringRef class.
The two biggest were:
1. Backing memory stored in a std::string, so we would frequently
have to use const_cast to get a mutable buffer for passing to
various low level APIs.
2. backing std::strings stored in a std::list, which doesn't
provide random access.
I wanted to solve these two issues so that we could provide
StringRef access to the underlying arguments, and also a way
to provide range-based access to the underlying argument array
while still providing convenient c-style access via an argv style
const char**.
The solution here is to store arguments in a single "entry" class
which contains the backing memory, a StringRef with precomputed
length, and the quote char. The backing memory is a manually
allocated const char* so that it is not invalidated when the
container is resized, and there is a separate argv array provided
for c-style access.
Differential revision: https://reviews.llvm.org/D25099
llvm-svn: 283157
Summary: The code added in svn r264332 causes "(lldb) " to be printed in the
middle of program console output. This fix restores the behavior for non-Windows
platforms to before the patch.
Reviewers: ted, zturner, clayborg
Subscribers: amccarth, lldb-commits
Differential Revision: http://reviews.llvm.org/D25137
llvm-svn: 283031
The test exposed a bug in the StructuredData Serialization code, which did not
escape the backslash properly. This manifested itself as windows breakpoint
serialization roundtrip test not succeeding (as windows paths included
backslashes).
llvm-svn: 282167
This change introduces optional marking of the column within a source
line where a thread is stopped. This marking will show up when the
source code for a thread stop is displayed, when the debug info
knows the column information, and if the optional column marking is
enabled.
There are two separate methods for handling the marking of the stop
column:
* via ANSI terminal codes, which are added inline to the source line
display. The default ANSI mark-up is to underline the column.
* via a pure text-based caret that is added in the appropriate column
in a newly-inserted blank line underneath the source line in
question.
There are some new options that control how this all works.
* settings set stop-show-column
This takes one of 4 values:
* ansi-or-caret: use the ANSI terminal code mechanism if LLDB
is running with color enabled; if not, use the caret-based,
pure text method (see the "caret" mode below).
* ansi: only use the ANSI terminal code mechanism to highlight
the stop line. If LLDB is running with color disabled, no
stop column marking will occur.
* caret: only use the pure text caret method, which introduces
a newly-inserted line underneath the current line, where
the only character in the new line is a caret that highlights
the stop column in question.
* none: no stop column marking will be attempted.
* settings set stop-show-column-ansi-prefix
This is a text format that indicates the ANSI formatting
code to insert into the stream immediately preceding the
column where the stop column character will be marked up.
It defaults to ${ansi.underline}; however, it can contain
any valid LLDB format codes, e.g.
${ansi.fg.red}${ansi.bold}${ansi.underline}
* settings set stop-show-column-ansi-suffix
This is the text format that specifies the ANSI terminal
codes to end the markup that was started with the prefix
described above. It defaults to: ${ansi.normal}. This
should be sufficient for the common cases.
Significant leg-work was done by Adrian Prantl. (Thanks, Adrian!)
differential review: https://reviews.llvm.org/D20835
reviewers: clayborg, jingham
llvm-svn: 282105
r282079 converted the regular expression interface to accept
and return StringRefs instead of char pointers. In one case
a null pointer check was converted to an empty string check,
but this was an incorrect conversion because an empty string
is a valid regular expression. Removing this check should
fix the test failures.
llvm-svn: 282090
This updates getters and setters to use StringRef instead of
const char *. I tested the build on Linux, Windows, and OSX
and saw no build or test failures. I cannot test any BSD
or Android variants, however I expect the required changes
to be minimal or non-existant.
llvm-svn: 282079
This makes the code easier to grok, and since this is a very low
level function it also is very helpful to have this take a StringRef
since it means anyone higher up the chain who has a StringRef would
have to first convert it to a null-terminated string. This way it
can work equally well with StringRefs or const char*'s, which will
enable the conversion of higher up functions to StringRef.
Tested on Windows, Linux, and OSX and saw no regressions.
llvm-svn: 281642
Moved the guts of the code from CommandObjectBreakpoint to Target (should
have done it that way in the first place.) Added an SBBreakpointList class
so there's a way to specify which breakpoints to serialize and to report the
deserialized breakpoints.
<rdar://problem/12611863>
llvm-svn: 281520
I'm was trying to do some cleanup and code modernization and in
doing so I needed to change ParseMachCPUDashSubtypeTriple to take
a StringRef. To ensure I don't break anything, I'm adding some
unit tests for this function. As a side benefit, this also expands
test coverage of this function to all platforms, since in general
this code would rarely be exercised on non Mac platforms, and never
in the test suite.
llvm-svn: 281387
Plumb unique_ptrs<> all the way through the baton interface.
NFC, this is a minor improvement to remove the possibility of an
accidental pointer ownership issue.
Reviewed By: jingham
Differential Revision: https://reviews.llvm.org/D24495
llvm-svn: 281360
Still to come:
1) SB API's
2) Testcases
3) Loose ends:
a) serialize Thread options
b) serialize Exception resolvers
4) "break list --file" should list breakpoints contained in a file and
"break read -f 1 3 5" should then read in only those breakpoints.
<rdar://problem/12611863>
llvm-svn: 281273
Summary:
It fixes the following compile warnings:
1. '0' flag ignored with precision and ‘%d’ gnu_printf format
2. enumeral and non-enumeral type in conditional expression
3. format ‘%d’ expects argument of type ‘int’, but argument 4 has type ...
4. enumeration value ‘...’ not handled in switch
5. cast from type ‘const uint64_t* {aka ...}’ to type ‘int64_t* {aka ...}’ casts away qualifiers
6. extra ‘;’
7. comparison between signed and unsigned integer expressions
8. variable ‘register_operand’ set but not used
9. control reaches end of non-void function
Reviewers: jingham, emaste, zturner, clayborg
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D24331
llvm-svn: 281191
mode in lldb works. I've been discussing this with Jim Ingham,
Greg Clayton, and Kate Stone for the past week or two.
Previously lldb would print three source lines (centered on the
line table entry line for the current line) followed by the assembly.
It would print the context information (module`function + offset)
before those three lines of source.
Now lldb will print up to two lines before/after the line table
entry. It prints two '*' characters for the line table line to
make it clear what line is showing assembly. There is one line of
whitespace before/after the source lines so the separation between
source & assembly is clearer. I don't print the context line
(module`function + offset). I stop printing context lines if it's
a different line table entry, or if it's a source line I've already
printed as context to another source line. If I have two line table
entries one after another for the same source line (I get these often
with clang - with different column information in them), I only print
the source line once.
I'm also using the target.process.thread.step-avoid-regexp setting
(which keeps you from stepping into STL functions that have been inlined
into your own code) and avoid printing any source lines from functions
that match that regexp.
When lldb disassembles into a new function, it will try to find the
declaration line # for the function and print all of the source lines
between the decl and the first line table entry (usually a { curly brace)
so we have a good chance of including the arguments, at least with the
debug info emitted by clang.
Finally, the # of source lines of context to show has been separated
from whether we're doing mixed source & assembly or not. Previously
specifying 0 lines of context would turn off mixed source & assembly.
I think there's room for improvement, and maybe some bugs I haven't
found yet, but it's in good enough shape to upstream and iterate at
this point.
I'm not sure how best to indicate which source line is the actual line
table # versus context lines. I'm using '**' right now. Both Kate
and Greg had the initial idea to reuse '->' (normally used to indicate
"currently executing source line") - I tried it but I wasn't thrilled,
I'm too used to the established meaning of ->.
Greg had the interesting idea of avoiding context source lines only
in two line table entries in the same source file. So we'd print
two lines before & after a source line, and then the next line table
entry (if it was on the next source line after those two context lines)
we'd display only the following two lines -- the previous two had just
been printed. If an inline source line was printed between these two,
though, we'd print the context lines for both of them. It's an
interesting idea, and I want to see how it works with both -O0 and -O3
codegen where we have different amounts of inlining.
<rdar://problem/27961419>
llvm-svn: 280906
*** to conform to clang-format’s LLVM style. This kind of mass change has
*** two obvious implications:
Firstly, merging this particular commit into a downstream fork may be a huge
effort. Alternatively, it may be worth merging all changes up to this commit,
performing the same reformatting operation locally, and then discarding the
merge for this particular commit. The commands used to accomplish this
reformatting were as follows (with current working directory as the root of
the repository):
find . \( -iname "*.c" -or -iname "*.cpp" -or -iname "*.h" -or -iname "*.mm" \) -exec clang-format -i {} +
find . -iname "*.py" -exec autopep8 --in-place --aggressive --aggressive {} + ;
The version of clang-format used was 3.9.0, and autopep8 was 1.2.4.
Secondly, “blame” style tools will generally point to this commit instead of
a meaningful prior commit. There are alternatives available that will attempt
to look through this change and find the appropriate prior commit. YMMV.
llvm-svn: 280751
this is a resubmission of r280476. The problem with the original commit was that it was printing
out all numbers as signed, which was wrong for unsigned numbers with the MSB set. Fix that and
add a unit test covering that case.
llvm-svn: 280480
This reverts commit r280476 as it breaks several tests on i386. I was fixing an 32-bit
breakage, and I did not run the 32-bit test suite before submitting, oops.
llvm-svn: 280478
Summary:
It seems the original intention of the function was printing signed values in decimal format, and
unsigned values in hex (without the leading "0x"). However, signed and unsigned long were
exchanged, which lead to amusing test failures in TestMemoryFind.py.
Instead of just switching the two, I think we should just print everything in decimal here, as
the current behaviour is very confusing (especially when one does not request printing of types).
Nothing seems to depend on this behaviour except and we already have a way for the user to
request the format he wants when printing values for most commands (which presumably does not go
through this function).
I also add a unit tests for the function in question.
Reviewers: clayborg, granata.enrico
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D24126
llvm-svn: 280476
The rewrite of StringExtractor::GetHexMaxU32 changes functionality in a way which makes
lldb-server crash. The crash (assert) happens when parsing the "qRegisterInfo0" packet, because
the function tries to drop_front more bytes than the packet contains. It's not clear to me
whether we should consider this a bug in the caller or the callee, but it any case, it worked
before, so I am reverting this until we can figure out what the proper interface should be.
llvm-svn: 280207
Makes Peek() return a StringRef instead of a const char*.
This leads to a few callers of Peek() being able to be made a
little nicer (for example using StringRef member functions instead
of c-style strncmp and related functions) and generally safer
usage.
llvm-svn: 280139
std::atomic<uint64_t> requires 64-bit alignment in order to
guarantee atomicity. Normally the compiler is pretty good about
aligning types, but an exception to this is when the type is
passed by value as a function parameter. In this case, if your
stack is 4-byte aligned, most modern compilers (including clang
as of LLVM 4.0) fail to align the type, rendering the atomicity
ineffective.
A deeper investigation of the class's implementation suggests
that the use of atomic was in vain anyway, because if the class
were to be shared amongst multiple threads, there were already
other data races present, and that the proper way to ensure
thread-safe access to this data would be to use a mutex from a
higher level.
Since the std::atomic was not serving its intended purpose anyway,
and since the presence of it generates compiler errors on some
platforms that cannot be workaround, we remove std::atomic from
Address here. Although unlikely, if data races do resurface
the proper fix should involve a mutex from a higher level, or an
attempt to limit the Address's access to a single thread.
llvm-svn: 279994
Summary:
Previously the builting demangler was on for platforms that explicitly set a flag by modifying
Mangled.cpp (windows, freebsd). The Xcode build always used builtin demangler by passing a
compiler flag. This adds a cmake flag (defaulting to ON) to configure the demangling library used
at build time. The flag is only available on non-windows platforms as there the system demangler
is not present (in the form we're trying to use it, at least).
The impact of this change is:
- linux: switches to the builtin demangler
- freebsd, windows: NFC (I hope)
- netbsd: switches to the builtin demangler
- osx cmake build: switches to the builtin demangler (matching the XCode build)
The main motivation for this is the cross-platform case, where it should bring more consistency
by removing the dependency on the host demangler (which can be completely unrelated to the debug
target).
Reviewers: zturner, emaste, krytarowski
Subscribers: emaste, clayborg, lldb-commits
Differential Revision: https://reviews.llvm.org/D23830
llvm-svn: 279808
Take 2, with missing cmake line fixed. Build tested on
Ubuntu 14.04 with clang-3.6.
See docs/structured_data/StructuredDataPlugins.md for details.
differential review: https://reviews.llvm.org/D22976
reviewers: clayborg, jingham
llvm-svn: 279202
Summary:
The following problem was occuring:
- broadcaster B had two listeners: L1 and L2 (thread T1)
- (T1) B has started to broadcast an event, it has locked a shared_ptr to L1 (in
ListenerIterator())
- on another thread T2 the penultimate reference to L1 was destroyed (the transient object in B is
now the last reference)
- (T2) the last reference to L2 was destroyed as well
- (T1) B has finished broadcasting the event to L1 and destroyed the last shared_ptr
- (T1) this triggered the destructor, which called into B->RemoveListener()
- (T1) all pointers in the m_listeners list were now stale, so RemoveListener emptied the list
- (T1) Eventually control returned to the ListenerIterator() for doing broadcasting, which was
still in the middle of iterating through the list
- (T1) Only now, it was holding onto a dangling iterator. BOOM.
I fix this issue by making sure nothing can interfere with the
iterate-and-remove-expired-pointers loop, by moving this logic into a single function, which
first locks (or clears) the whole list and then returns the list of valid and locked Listeners
for further processing. Instead of std::list I use an llvm::SmallVector which should hopefully
offset the fact that we create a copy of the list for the common case where we have only a few
listeners (no heap allocations).
A slight difference in behaviour is that now RemoveListener does not remove an element from the
list -- it only sets it's mask to 0, which means it will be removed during the next iteration of
GetListeners(). This is purely an implementation detail and it should not be externally
noticable.
I was not able to reproduce this bug reliably without inserting sleep statements into the code,
so I do not add a test for it. Instead, I add some unit tests for the functions that I do modify.
Reviewers: clayborg, jingham
Subscribers: tberghammer, lldb-commits
Differential Revision: https://reviews.llvm.org/D23406
llvm-svn: 278664
It's always hard to remember when to include this file, and
when you do include it it's hard to remember what preprocessor
check it needs to be behind, and then you further have to remember
whether it's windows.h or win32.h which you need to include.
This patch changes the name to PosixApi.h, which is more appropriately
named, and makes it independent of any preprocessor setting.
There's still the issue of people not knowing when to include this,
because there's not a well-defined set of things it exposes other
than "whatever is missing on Windows", but at least this should
make it less painful to fix when problems arise.
This patch depends on LLVM revision r278170.
llvm-svn: 278177
Clean up format string warnings in ValueObjectSyntheticFilter.cpp to explictly cast "%p" params to void *`
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D22923
llvm-svn: 277016
This finally removes the use of the Mutex and Condition classes. This is an
intricate patch as the Mutex and Condition classes were tied together.
Furthermore, many places had slightly differing uses of time values. Convert
timeout values to relative everywhere to permit the use of
std::chrono::duration, which is required for the use of
std::condition_variable's timeout. Adjust all Condition and related Mutex
classes over to std::{,recursive_}mutex and std::condition_variable.
This change primarily comes at the cost of breaking the TracingMutex which was
based around the Mutex class. It would be possible to write a wrapper to
provide similar functionality, but that is beyond the scope of this change.
llvm-svn: 277011
"Incorrect" file name seen on Android whene the main executable is
called "app_process32" (or 64) but the linker specifies the package
name (e.g. com.android.calculator2). Additionally it can be present
in case of some linker bugs.
This CL adds logic to try to fetch the correct file name from the proc
file system based on the base address sepcified by the linker in case
we are failed to load the module by name.
Differential revision: http://reviews.llvm.org/D22219
llvm-svn: 276411
They will dump pretty-print (indentation, extra whitepsace) by default.
I'll make a change to ProcessGDBRemote soon so it stops sending JSON strings
to debugserver pretty-printed; it's unnecessary extra bytes being sent between
the two.
llvm-svn: 276079
Background: symbols and functions can be looked up by full mangled name and by basename. SymbolFile and ObjectFile are expected to be able to do the lookups based on full mangled name or by basename, so when the user types something that is incomplete, we must be able to look it up efficiently. For example the user types "a:🅱️:c" as a symbol to set a breakpoint on, we will break this down into a 'lookup "c"' and then weed out N matches down to just the ones that match "a:🅱️:c". Previously this was done manaully in many functions by calling Module::PrepareForFunctionNameLookup(...) and then doing the lookup and manually pruning the results down afterward with duplicated code. Now all places use Module::LookupInfo to do the work in one place.
This allowed me to fix the name lookups to look for "func" with eFunctionNameTypeFull as the "name_type_mask", and correctly weed the results:
"func", "func()", "func(int)", "a::func()", "b::func()", and "a:🅱️:func()" down to just "func", "func()", "func(int)". Previously we would have set 6 breakpoints, now we correctly set just 3. This also extends to the expression parser when it looks up names for functions it needs to not get multiple results so we can call the correct function.
<rdar://problem/24599697>
llvm-svn: 275281
The issue was we have two global variables: one that contains a DebuggerList pointer and one that contains a std::mutex pointer. These get initialized in Debugger::Initialize(), and everywhere that uses these does:
if (g_debugger_list_ptr && g_debugger_list_mutex_ptr)
{
std::lock_guard<std::recursive_mutex> guard(*g_debugger_list_mutex_ptr);
// do work while mutex is locked
}
Debugger::Terminate() was deleting and nulling out g_debugger_list_ptr which meant we had a race condition where someone might do the if statement and it evaluates to true, then another thread calls Debugger::Terminate() and deletes and nulls out g_debugger_list_ptr while holding the mutex, and another thread then locks the mutex and tries to use g_debugger_list_ptr. The fix is to just not delete and null out the g_debugger_list_ptr variable.
llvm-svn: 275119
This feature was added to solve a lookup problem in expressions when local variables
shadow ivars. That solution requires fully realizing all local variables to evaluate
any expression, and can cause significant performance problems when evaluating
expressions in frames that have many complex locals.
Until we get a better solution, this setting mitigates the problem when you don't
have local variables that shadow ivars.
<rdar://problem/27226122>
llvm-svn: 274783
"frame variable" and "target variable" are trying to emulate the expression parser when doing things like:
(lldb) frame variable &my_struct.my_bitfield
And since the expression parser doesn't allow this, we shouldn't allow "frame variable" or "target variable" to succeed.
<rdar://problem/27208607>
llvm-svn: 274703
- if a synthetic child comes from the same hierarchy as its parent object, then it can't be cached by SharedPointer inside the synthetic provider, or it will cause a reference loop;
- but, if a synthetic child is made from whole cloth (e.g. from an expression, a memory region, ...), then it better be cached by SharedPointer, or it will be cleared out and cause an assert() to fail if used at a later point
For most cases of self-rooted synthetic children, we have a flag we set "IsSyntheticChildrenGenerated", but we were not using it to track caching. So, what ended up happening is each provider would set up its own cache, and if it got it wrong, a hard to diagnose crash would ensue
This patch fixes that by centralizing caching in ValueObjectSynthetic - if a provider returns a self-rooted child (as per the flag), then it gets cached centrally by the ValueObject itself
This cache is used only for lifetime management and not later retrieval of child values - a different cache handles that (because we might have a mix of self-rooted and properly nested child values for the same parent, we can't trivially use this lifetime cache for retrieval)
Fixes rdar://26480007
llvm-svn: 274683
settings or raise no error if not found.
From time to time it is useful to add some setting to work around or enable
a transitory feature. We've been reluctant to remove them later because then
we will break folks .lldbinit files. With this change you can add an "experimental"
node to the settings. If you later decide you want to keep the option, just move
it to the level that contained the "experimental" setting and it will still be
found. Or just remove it - setting it will then silently fail and won't halt
the .lldbinit file execution.
llvm-svn: 274593
In Address.cpp, we were asking for the lldb::eSymbolContextVariable to be resolved, yet we weren't using the variable. This code gets called when disassembling and can cause the manual creation of all global variables variables which can take minutes. Removing eSymbolContextVariable allows disassembly to not create these long pauses.
In Module.cpp, if someone only specified the lldb::eSymbolContextVariable flag, we would not look into a module's debug info, now we will.
<rdar://problem/26907449>
llvm-svn: 273307
In order to make this happen, I have added permissions to sections so that we can know what the permissions are for a given section, and modified both core file plug-ins to override Process::GetMemoryRegionInfo() and answer things correctly.
llvm-svn: 272276
If users call "static void lldb::SBDebugger::Terminate()" we will clean up the debugger list, and users can individually destroy debugger instances with "static void lldb::SBDebugger::Destroy(SBDebugger &)". But if we let the C++ destructor chain tear down this list, other threads that might still be running as the main thread exits can now crash if they access the debugger list. We stop this by leaking the debugger list and its mutex.
<rdar://problem/26372169>
llvm-svn: 270869
On Darwin if a mmap file is code signed and the code signature is invalid, it used to crash. If we specify the MAP_RESILIENT_CODESIGN mmap flag when mapping a file for reading, we can avoid crashing.
Another mmap flag named MAP_RESILIENT_MEDIA allows us to survive if we mmap files that are on removable media like network servers or removable hard drives. If a file was mapped and later the media that had the file became unavailable, we would crash when we would touch the next page that wasn't paged in. Now it will return zeroes and stop of from us from crashing.
<rdar://problem/25918698>
llvm-svn: 270254
Summary: One of the cases handled by ValueObjectChild::UpdateValue() uses the entire width of the parent's scalar value as the size of the child, and extracts the child by calling Scalar::ExtractBitfield(). This seems valid but APInt::trunc(), APInt::sext() and APInt::zext() assert that the bit field must not have the same size as the parent scalar. Replacing those calls with sextOrTrunc(), zextOrTrunc(), sextOrSelf() and zextOrSelf() fixes the assertion failures.
Reviewers: uweigand, labath
Subscribers: labath, lldb-commits
Differential Revision: http://reviews.llvm.org/D20355
llvm-svn: 270062
This is a pretty straightforward first pass over removing a number of uses of
Mutex in favor of std::mutex or std::recursive_mutex. The problem is that there
are interfaces which take Mutex::Locker & to lock internal locks. This patch
cleans up most of the easy cases. The only non-trivial change is in
CommandObjectTarget.cpp where a Mutex::Locker was split into two.
llvm-svn: 269877
The main issues were:
- Listeners recently were converted over to used by getting a shared pointer to a listener. And when they listened to broadcasters they would get a strong reference added to them meaning the listeners would never go away. This caused memory usage to increase and would cause performance issue if many steps were done.
- The lldb_private::Process private state thread had an issue where if a "stop" contol signal was attempted to be sent to that thread, it could end up not responding in 2 seconds and end up getting cancelled which might cause us to cancel a thread that had a mutex locked and it would deadlock the test.
This change makes broadcasters hold onto weak references to listeners. It also fixes some bad threading code that had races inside of it by making the m_events_mutex be non-recursive and getting rid of fragile use of a Predicate<bool> to say that new events are available, and replacing it with using the m_events_mutex with a new m_events_condition to control access to the events in a safer way.
The private state thread now uses a safer way to communicate that the control event has been received by the private state thread: it makes a EventDataReceipt instance that it attaches to the event that sends the control to the private state thread and used this to synchronize the fact that the private state thread has received the event instead of using a Predicate<bool> to convey the info. When the signal event is received, it will pull the event off of the queue in the private state thread and cause the EventData::DoOnRemoval() to be called, which will signal that the event has been received. This cleans up the signal delivery notification so it doesn't rely on a member variable of the process class to convey the info.
std::shared_ptr<EventDataReceipt> event_receipt_sp(new EventDataReceipt());
m_private_state_control_broadcaster.BroadcastEvent(signal, event_receipt_sp);
<rdar://problem/26256353> Listeners are being kept around longer than they should be due to recent changs
<rdar://problem/26256258> Private process state thread can be cancelled and cause deadlocks in test suite
llvm-svn: 269377
Patch by Nitesh Jain.
Summary: The ArchSpec::m_flags will be set based on ELF flag ABI.
Reviewers: ovyalov, clayborg
Subscribers: lldb-commits, mohit.bhakkad, sagar, jaydeep, bhushan
Differential: D18858
llvm-svn: 269181
Clear() log message was claiming it was the destructor, which had me very confused when looking
at the log messages. Fix the message, and add a log message to the real destructor.
Also noticed that the destructor was needlessly locking the broadcaster mutex (as Clear was
locking it again anyway), so remove that as well.
llvm-svn: 269058
"Allow LanguageRuntimes to return an error if they fail in the course of dynamic type discovery
This is not meant to report that a value doesn't have a dynamic type - it is only meant as a mechanism to propagate actual type discovery issues (e.g. malformed type metadata for languages that have such a notion)
This information is used by ValueObjectDynamic to set its own m_error, which is a fairly sharp and heavyweight tool to begin with
For the time being, this is an architectural improvement but a practical no-op as no existing runtimes are actually setting errors"
I need to think about what I want to do in this space more carefully - this attempt might be too heavy of a hammer for the nail I am trying to fix, and I don't want to leave it in while I ponder
llvm-svn: 268686
This is not meant to report that a value doesn't have a dynamic type - it is only meant as a mechanism to propagate actual type discovery issues (e.g. malformed type metadata for languages that have such a notion)
This information is used by ValueObjectDynamic to set its own m_error, which is a fairly sharp and heavyweight tool to begin with
For the time being, this is an architectural improvement but a practical no-op as no existing runtimes are actually setting errors
llvm-svn: 268591
We don't want a mutex in debugger as it will cause A/B locking issues with the lldb_private::Target's mutex, but we do need to stop two threads from doing Debugger::Clear at the same time. We have seen issues with this with the C++ global destructor chain where the global debugger list is being destroyed and the Debugger::~Debugger() is calling it while another thread was in the middle of running that function.
<rdar://problem/26098913>
llvm-svn: 268563
Summary:
AdbClient was attempting to handle the case where the socket input arrived in pieces, but it was
failing to handle the case where the connection was closed before that happened. In this case, it
would just spin in an infinite loop calling Connection::Read. (This was also the cause of the
spurious timeouts on the darwin->android buildbot. The exact cause of the premature EOF remains
to be investigated, but is likely a server bug.)
Since this wait-for-a-certain-number-of-bytes seems like a useful functionality to have, I am
moving it (with the infinite loop fixed) to the Connection class, and adding an
appropriate test for it.
Reviewers: clayborg, zturner, ovyalov
Subscribers: tberghammer, danalbert, lldb-commits
Differential Revision: http://reviews.llvm.org/D19533
llvm-svn: 268380
This reverts commit r267833 as it breaks the build. It looks like some work in progress got
committed together with the actual fix, but I'm not sure which one is which, so I'll revert the
whole patch and let author resumbit it after fixing the build error.
llvm-svn: 267861
In templated const functions, trying to run an expression would produce the
error
error: out-of-line definition of '$__lldb_expr' does not match any declaration in 'foo'
member declaration does not match because it is const qualified
error: 1 error parsing expression
which is no good. It turned out we don't actually need to worry about "const,"
we just need to be consistent about the declaration of the expression and the
FunctionDecl we inject into the class for "this."
Also added a test case.
<rdar://problem/24985958>
llvm-svn: 267833
rL267291 introduces a lot regression on arm-linux LLDB testsuite.
This patch fixes half of them. I am merging it under already revied android counterpart.
Another patch fixing rest of the issue will follow this commit.
Differential revision: http://reviews.llvm.org/D19480
llvm-svn: 267508
Recommit modified version of r266311 including build bot regression fix.
This differs from the original r266311 by:
- Fixing Scalar::Promote to correctly zero- or sign-extend value depending
on signedness of the *source* type, not the target type.
- Omitting a few stand-alone fixes that were already committed separately.
llvm-svn: 266422
Currently, the DataExtractor::GetMaxU64Bitfield and GetMaxS64Bitfield
routines assume the incoming "bitfield_bit_offset" parameter uses
little-endian bit numbering, i.e. a bitfield_bit_offset 0 refers to
a bitfield whose least-significant bit coincides with the least-
significant bit of the surrounding integer.
On many big-endian systems, however, the big-endian bit numbering
is used for bit fields. Here, a bitfield_bit_offset 0 refers to
a bitfield whose most-significant bit conincides with the most-
significant bit of the surrounding integer.
Now, in principle LLDB could arbitrarily choose which semantics of
bitfield_bit_offset to use. However, there are two problems with
the current approach:
- When parsing DWARF, LLDB decodes bit offsets in little-endian
bit numbering on LE systems, but in big-endian bit numbering
on BE systems. Passing those offsets later on into the
DataExtractor routines gives incorrect results on BE.
- In the interim, LLDB's type layer combines byte and bit offsets
into a single number. I.e. instead of recording bitfields by
specifying the byte offset and byte size of the surrounding
integer *plus* the bit offset of the bit field within that field,
it simply records a single bit offset number.
Now, note that converting from byte offset + bit offset to a
single offset value and back is well-defined if we either use
little-endian byte order *and* little-endian bit numbering,
or use big-endian byte order *and* big-endian bit numbering.
Any other combination will yield incorrect results.
Therefore, the simplest approach would seem to be to always use
the bit numbering that matches the system byte order. This makes
storing a single bit offset valid, and makes the existing DWARF
code correct. The only place to fix is to teach DataExtractor
to use big-endian bit numbering on big endian systems.
However, there is only additional caveat: we also get bit offsets
from LLDB synthetic bitfields. While the exact semantics of those
doesn't seem to be well-defined, from test cases it appears that
the intent was for the user-provided synthetic bitfield offset to
always use little-endian bit numbering. Therefore, on a big-endian
system we now have to convert those to big-endian bit numbering
to remain consistent.
Differential Revision: http://reviews.llvm.org/D18982
llvm-svn: 266312
The Scalar implementation and a few other places in LLDB directly
access the internal implementation of APInt values using the
getRawData method. Unfortunately, pretty much all of these places
do not handle big-endian systems correctly. While on little-endian
machines, the pointer returned by getRawData can simply be used as
a pointer to the integer value in its natural format, no matter
what size, this is not true on big-endian systems: getRawData
actually points to an array of type uint64_t, with the first element
of the array always containing the least-significant word of the
integer. This means that if the bitsize of that integer is smaller
than 64, we need to add an offset to the pointer returned by
getRawData in order to access the value in its natural type, and
if the bitsize is *larger* than 64, we actually have to swap the
constituent words before we can access the value in its natural type.
This patch fixes every incorrect use of getRawData in the code base.
For the most part, this is done by simply removing uses of getRawData
in the first place, and using other APInt member functions to operate
on the integer data.
This can be done in many member functions of Scalar itself, as well
as in Symbol/Type.h and in IRInterpreter::Interpret. For the latter,
I've had to add a Scalar::MakeUnsigned routine to parallel the existing
Scalar::MakeSigned, e.g. in order to implement an unsigned divide.
The Scalar::RawUInt, Scalar::RawULong, and Scalar::RawULongLong
were already unused and can be simply removed. I've also removed
the Scalar::GetRawBits64 function and its few users.
The one remaining user of getRawData in Scalar.cpp is GetBytes.
I've implemented all the cases described above to correctly
implement access to the underlying integer data on big-endian
systems. GetData now simply calls GetBytes instead of reimplementing
its contents.
Finally, two places in the clang interface code were also accessing
APInt.getRawData in order to actually construct a byte representation
of an integer. I've changed those to make use of a Scalar instead,
to avoid having to re-implement the logic there.
The patch also adds a couple of unit tests verifying correct operation
of the GetBytes routine as well as the conversion routines. Those tests
actually exposed more problems in the Scalar code: the SetValueFromData
routine didn't work correctly for 128- and 256-bit data types, and the
SChar routine should have an explicit "signed char" return type to work
correctly on platforms where char defaults to unsigned.
Differential Revision: http://reviews.llvm.org/D18981
llvm-svn: 266311
Scalar::GetBytes provides a non-const access to the underlying bytes
of the scalar value, supposedly allowing for modification of those
bytes. However, even with the current implementation, this is not
really possible. For floating-point scalars, the pointer returned
by GetBytes refers to a temporary copy; modifications to that copy
will be simply ignored. For integer scalars, the pointer refers
to internal memory of the APInt implementation, which isn't
supposed to be directly modifyable; GetBytes simply casts aways
the const-ness of the pointer ...
With my upcoming patch to fix Scalar::GetBytes for big-endian
systems, this problem is going to get worse, since there we need
temporary copies even for some integer scalars. Therefore, this
patch makes Scalar::GetBytes const, fixing all those problems.
As a follow-on change, RegisterValues::GetBytes must be made const
as well. This in turn means that the way of initializing a
RegisterValue by doing a SetType followed by writing to GetBytes
no longer works. Instead, I've changed SetValueFromData to do
the equivalent of SetType itself, and then re-implemented
SetFromMemoryData to work on top of SetValueFromData.
There is still a need for RegisterValue::SetType, since some
platform-specific code uses it to reinterpret the contents of
an already filled RegisterValue. To make this usage work in
all cases (even changing from a type implemented via Scalar
to a type implemented as a byte buffer), SetType now simply
copies the old contents out, and then reloads the RegisterValue
from this data using the new type via SetValueFromData.
This in turn means that there is no remaining caller of
Scalar::SetType, so it can be removed.
The only other follow-on change was in MIPS EmulateInstruction
code, where some uses of RegisterValue::GetBytes could be made
const trivially.
Differential Revision: http://reviews.llvm.org/D18980
llvm-svn: 266310
This patch adds support for Linux on SystemZ:
- A new ArchSpec value of eCore_s390x_generic
- A new directory Plugins/ABI/SysV-s390x providing an ABI implementation
- Register context support
- Native Linux support including watchpoint support
- ELF core file support
- Misc. support throughout the code base (e.g. breakpoint opcodes)
- Test case updates to support the platform
This should provide complete support for debugging the SystemZ platform.
Not yet supported are optional features like transaction support (zEC12)
or SIMD vector support (z13).
There is no instruction emulation, since our ABI requires that all code
provide correct DWARF CFI at all PC locations in .eh_frame to support
unwinding (i.e. -fasynchronous-unwind-tables is on by default).
The implementation follows existing platforms in a mostly straightforward
manner. A couple of things that are different:
- We do not use PTRACE_PEEKUSER / PTRACE_POKEUSER to access single registers,
since some registers (access register) reside at offsets in the user area
that are multiples of 4, but the PTRACE_PEEKUSER interface only allows
accessing aligned 8-byte blocks in the user area. Instead, we use a s390
specific ptrace interface PTRACE_PEEKUSR_AREA / PTRACE_POKEUSR_AREA that
allows accessing a whole block of the user area in one go, so in effect
allowing to treat parts of the user area as register sets.
- SystemZ hardware does not provide any means to implement read watchpoints,
only write watchpoints. In fact, we can only support a *single* write
watchpoint (but this can span a range of arbitrary size). In LLDB this
means we support only a single watchpoint. I've set all test cases that
require read watchpoints (or multiple watchpoints) to expected failure
on the platform. [ Note that there were two test cases that install
a read/write watchpoint even though they nowhere rely on the "read"
property. I've changed those to simply use plain write watchpoints. ]
Differential Revision: http://reviews.llvm.org/D18978
llvm-svn: 266308
Summary: Print environment from triple if it exists.
Reviewers: tfiala, clayborg
Subscribers: lldb-commits, sas
Differential Revision: http://reviews.llvm.org/D18620
Change by Francis Ricci <fjricci@fb.com>
llvm-svn: 265420
in thumb mode into one method in ArchSpec, replace checks for
specific cores in the disassembler with calls to this. Also call
this from the arm instruction emulation code.
The determination of whether a given ArchSpec is thumb-only is still
a bit of a hack, but at least the hack is consolidated into a single
place. In my original version of this patch http://reviews.llvm.org/D13578
I was calling into llvm's feature arm feature tables to make this
determination, like
#include "llvm/Support/TargetRegistry.h"
#include "llvm/MC/MCSubtargetInfo.h"
#include "llvm/../../lib/Target/ARM/ARMGenRegisterInfo.inc"
#include "llvm/../../lib/Target/ARM/ARMFeatures.h"
[...]
std::string triple (GetTriple().getTriple());
const char *cpu = "";
const char *features_str = "";
const llvm::Target *curr_target = llvm::TargetRegistry::lookupTarget(triple.c_str(), Error);
std::unique_ptr<llvm::MCSubtargetInfo> subtarget_info_up (curr_target->createMCSubtargetInfo(triple.c_str(), cpu, features_str));
if (subtarget_info_up->getFeatureBits()[llvm::ARM::FeatureNoARM])
{
return true;
}
but those tables are post-llvm-build generated and linking against them
for all of our different build system methods was a big hiccup that I
haven't had time to revisit convincingly.
I'll keep that reviews.llvm.org patch around to remind myself that I
need to take another run at linking against the necessary tables
again in llvm.
<rdar://problem/23022803>
llvm-svn: 265377
Summary: On Windows (and possibly other hosts with LLDB_DISABLE_LIBEDIT defined), the (lldb) prompt won't print after async output, like from a breakpoint hit or a step. This patch forces the prompt to be printed out after async output.
Reviewers: zturner, clayborg
Subscribers: amccarth, lldb-commits
Differential Revision: http://reviews.llvm.org/D18335
llvm-svn: 264332
Win32 API calls that are Unicode aware require wide character
strings, but LLDB uses UTF8 everywhere. This patch does conversions
wherever necessary when passing strings into and out of Win32 API
calls.
Patch by Cameron
Differential Revision: http://reviews.llvm.org/D17107
Reviewed By: zturner, amccarth
llvm-svn: 264074
On FreeBSD _LIBCPP_EXTERN_TEMPLATE is being defined from something
included by lldb/lldb-private.h. Undefine it after the #include to avoid
the redefinition warning.
Differential Revision: http://reviews.llvm.org/D17402
llvm-svn: 263486
When the parent of an expression is anonymous, skip adding '.' or '->' before the expression name.
Differential Revision: http://reviews.llvm.org/D18005
llvm-svn: 263166
That way you can set offset breakpoints that will move as the function they are
contained in moves (which address breakpoints can't do...)
I don't align the new address to instruction boundaries yet, so you have to get
this right yourself for now.
<rdar://problem/13365575>
llvm-svn: 263049
The System-V x86_64 ABI requires floating point values to be passed
in 128-but SSE vector registers (xmm0, ...). When printing such a
variable this currently yields an <invalid load address>.
This patch makes LLDB's DWARF expression evaluator accept 128-bit
registers as scalars. It also relaxes the check that the size of the
result of the DWARF expression be equal to the size of the variable to a
greater-than. DWARF defers to the ABI how smaller values are being placed
in a larger register.
Implementation note: I found the code in Value::SetContext() that changes
the m_value_type after the fact to be questionable. I added a sanity check
that the Value's memory buffer has indeed been written to (this is
necessary, because we may have a scalar value in a vector register), but
really I feel like this is the wrong place to be setting it.
Reviewed by Greg Clayton.
http://reviews.llvm.org/D17897
rdar://problem/24944340
llvm-svn: 262947
to each other. This should remove some infrequent teardown crashes when the
listener is not the debugger's listener.
Processes now need to take a ListenerSP, not a Listener&.
This required changing over the Process plugin class constructors to take a ListenerSP, instead
of a Listener&. Other than that there should be no functional change.
<rdar://problem/24580184> CrashTracer: [USER] Xcode at …ework: lldb_private::Listener::BroadcasterWillDestruct + 39
llvm-svn: 262863
Additionally fix the type of some dwarf expression where we had a
confusion between scalar and load address types after a dereference.
Differential revision: http://reviews.llvm.org/D17604
llvm-svn: 262014
DWARF stores this information in the DW_AT_start_scope attribute. This
CL add support for this attribute and also changes the functions
displaying frame variables to only display the variables currently in
scope.
Differential revision: http://reviews.llvm.org/D17449
llvm-svn: 261858
Paths on Windows are not case-sensitive. Because of this, if a file
is called main.cpp, you should be able to set a breakpoint on it
by using the name Main.cpp. In an ideal world, you could just
tell people to match the case, but in practice this can be a real
problem as it requires you to know whether the person who compiled
the program ran "clang++ main.cpp" or "clang++ Main.cpp", both of
which would work, regardless of what the file was actually called.
This fixes http://llvm.org/pr22667
Patch by Petr Hons
Differential Revision: http://reviews.llvm.org/D17492
Reviewed by: zturner
llvm-svn: 261771
SUMMARY:
This patch implements ArchSpec::GetClangTargetCPU() that provides string representing current architecture as a target CPU.
This string is then passed to tools like clang so that they generate correct code for that target.
Reviewers: clayborg, zturner
Subscribers: mohit.bhakkad, sagar, jaydeep, lldb-commits
Differential Revision: http://reviews.llvm.org/D17022
llvm-svn: 261206
the xcode project file to catch switch statements that have a
case that falls through unintentionally.
Define LLVM_FALLTHROUGH to indicate instances where a case has code
and intends to fall through. This should be in llvm/Support/Compiler.h;
Peter Collingbourne originally checked in there (r237766), then
reverted (r237941) because he didn't have time to mark up all the
'case' statements that were intended to fall through. I put together
a patch to get this back in llvm http://reviews.llvm.org/D17063 but
it hasn't been approved in the past week. I added a new
lldb-private-defines.h to hold the definition for now.
Every place in lldb where there is a comment that the fall-through
is intentional, I added LLVM_FALLTHROUGH to silence the warning.
I haven't tried to identify whether the fallthrough is a bug or
not in the other places.
I haven't tried to add this to the cmake option build flags.
This warning will only work for clang.
This build cleanly (with some new warnings) on macosx with clang
under xcodebuild, but if this causes problems for people on other
configurations, I'll back it out.
llvm-svn: 260930
llvm::DenseSet<lldb_private::SymbolFile *> &searched_symbol_files
Each time a SymbolFile::FindTypes() is called, it needs to check the searched_symbol_files list to make sure it hasn't already been asked to find the type and return immediately if it has been checked. This will stop circular dependencies from also crashing LLDB during type queries.
This has proven to be an issue when debugging large applications on MacOSX that use DWARF in .o files.
<rdar://problem/24581488>
llvm-svn: 260434
Summary: This also fixes an infinite recursion between lldb_private::operator>> () and Scalar::operator>>= ().
Reviewers: sagar, tberghammer, labath
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D16868
Patch by Marianne Mailhot-Sarrasin
llvm-svn: 260239
Summary:
I've run into an issue when running unit tests, where the underlying problem turned out to be
that we were creating Timer objects (through several layers of indirection) without calling
Timer::Initialize. Since Timer's thread-local storage was not properly initialized, we were
overwriting gtest's own thread-local storage, causing test failures.
Instead of requiring that every test calls Timer::Initialize(), I remove the function altogether:
The thread-local storage can be initialized on-demand, and the g_file variable initialized to
stdout and never changed, so I have simply removed it.
Reviewers: clayborg, zturner, tberghammer
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D16722
llvm-svn: 259356
This fixes the regression of several tests on Windows after rL258621.
The root problem is that ObjectFilePECOFF was not setting type information for the symbols, and the new CL rejects symbols without type information, breaking functionality like thread step-over.
The fix sets the type information for functions (and creates a TODO for other types).
Along the way, I fixed some typos and formatting that made the code I was debugging harder to understand.
In the long run, we should consider replacing most of ObjectFilePECOFF with the COFF parsing code from LLVM.
Differential Revision: http://reviews.llvm.org/D16563
llvm-svn: 258758
r256927 included a duplicate StreamString header file. This patch simply removes the duplicate.
Author: Luke Drummond <luke.drummond@codeplay.com>
Differential Revision: http://reviews.llvm.org/D15948
llvm-svn: 257061
This patch eases the printing of iterable string containers.
Author: Luke Drummond <luke.drummond@codeplay.com>
Differential Revision: http://reviews.llvm.org/D15773
llvm-svn: 256927
This patch adds support for printing global static const variables which are given a DW_AT_const_value DWARF tag by clang.
Fix for bug https://llvm.org/bugs/show_bug.cgi?id=25653
Reviewers: clayborg, tberghammer
Subscribers: emaste, lldb-commits
Differential Revision: http://reviews.llvm.org/D15576
llvm-svn: 255887
This patch reworks the breakpoint filter-by-language patch to use the
symbol context instead of trying to guess the language solely from the
symbol's name. This has the advantage that symbols compiled with debug
info will have their actual language known. Symbols without debug info
will still do the same "guess"ing because Symbol::GetLanguage() is
implemented using Mangled::GuessLanguage(). The recognition of ObjC
names was merged into Mangled::GuessLanguage.
Reviewed by: jingham, clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D15326
llvm-svn: 255808
Kamil Rytarowski