This adds the `MVE_qDest_rSrc` superclass and all its instances, plus
a few other instructions that also take a scalar input register or two.
I've also belatedly added custom diagnostic messages to the operand
classes for odd- and even-numbered GPRs, which required matching
changes in two of the existing MVE assembly test files.
Reviewers: dmgreen, samparker, SjoerdMeijer, t.p.northover
Subscribers: javed.absar, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62678
llvm-svn: 364040
Summary:
This adds the `MVE_qDest_qSrc` superclass and all instructions that
inherit from it. It's not the complete class of _everything_ with a
q-register as both destination and source; it's a subset of them that
all have similar encodings (but it would have been hopelessly unwieldy
to call it anything like MVE_111x11100).
This category includes add/sub with carry; long multiplies; halving
multiplies; multiply and accumulate, and some more complex
instructions.
Reviewers: dmgreen, samparker, SjoerdMeijer, t.p.northover
Subscribers: javed.absar, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62677
llvm-svn: 364037
Summary:
These take a pair of vector register to compare, and a comparison type
(written in the form of an Arm condition suffix); they output a vector
of booleans in the VPR register, where predication can conveniently
use them.
Reviewers: dmgreen, samparker, SjoerdMeijer, t.p.northover
Subscribers: javed.absar, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62676
llvm-svn: 364027
This includes integer arithmetic of various kinds (add/sub/multiply,
saturating and not), and the immediate forms of VMOV and VMVN that
load an immediate into all lanes of a vector.
Reviewers: dmgreen, samparker, SjoerdMeijer, t.p.northover
Subscribers: javed.absar, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62674
llvm-svn: 363936
This includes all the obvious bitwise operations (AND, OR, BIC, ORN,
MVN) in register-to-register forms, and the immediate forms of
AND/OR/BIC/ORN; byte-order reverse instructions; and the VMOVs that
access a single lane of a vector.
Some of those VMOVs (specifically, the ones that access a 32-bit lane)
share an encoding with existing instructions that were disassembled as
accessing half of a d-register (e.g. `vmov.32 r0, d1[0]`), but in
8.1-M they're now written as accessing a quarter of a q-register (e.g.
`vmov.32 r0, q0[2]`). The older syntax is still accepted by the
assembler.
Reviewers: dmgreen, samparker, SjoerdMeijer, t.p.northover
Subscribers: javed.absar, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62673
llvm-svn: 363838
This includes saturating and non-saturating shifts, both with
immediate shift count and with the shift counts given by another
vector register; VSHLC (in which the bits shifted out of each active
vector lane are shifted in to the next active lane); and also VMOVL,
which is enough like an immediate shift that it didn't fit too badly
in this category.
Reviewers: dmgreen, samparker, SjoerdMeijer, t.p.northover
Subscribers: javed.absar, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62672
llvm-svn: 363696
Summary:
These form a small family of their own, to go with the floating-point
VMINNM/VMAXNM instructions added in a previous commit.
They introduce the first of many special cases in the mnemonic
recognition code, because VMIN with the E suffix used by the VPT
predication system needs to avoid being interpreted as the nonexistent
instruction 'VMI' with an ordinary 'NE' condition suffix.
Reviewers: dmgreen, samparker, SjoerdMeijer, t.p.northover
Subscribers: javed.absar, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62671
llvm-svn: 363695
This is the family of vector instructions that combine all the lanes
in their input vector(s), and output a value in one or two GPRs.
Differential Revision: https://reviews.llvm.org/D62670
llvm-svn: 363403
This commit prepares the way to start adding the main collection of
MVE instructions, which operate on the 128-bit vector registers.
The most obvious thing that's needed, and the simplest, is to add the
MQPR register class, which is like the existing QPR except that it has
fewer registers in it.
The more complicated part: MVE defines a system of vector predication,
in which instructions operating on 128-bit vector registers can be
constrained to operate on only a subset of the lanes, using a system
of prefix instructions similar to the existing Thumb IT, in that you
have one prefix instruction which designates up to 4 following
instructions as subject to predication, and within that sequence, the
predicate can be inverted by means of T/E suffixes ('Then' / 'Else').
To support instructions of this type, we've added two new Tablegen
classes `vpred_n` and `vpred_r` for standard clusters of MC operands
to add to a predicated instruction. Both include a flag indicating how
the instruction is predicated at all (options are T, E and 'not
predicated'), and an input register field for the register controlling
the set of active lanes. They differ from each other in that `vpred_r`
also includes an input operand for the previous value of the output
register, for instructions that leave inactive lanes unchanged.
`vpred_n` lacks that extra operand; it will be used for instructions
that don't preserve inactive lanes in their output register (either
because inactive lanes are zeroed, as the MVE load instructions do, or
because the output register isn't a vector at all).
This commit also adds the family of prefix instructions themselves
(VPT / VPST), and all the machinery needed to work with them in
assembly and disassembly (e.g. generating the 't' and 'e' mnemonic
suffixes on disassembled instructions within a predicated block)
I've added a couple of demo instructions that derive from the new
Tablegen base classes and use those two operand clusters. The bulk of
the vector instructions will come in followup commits small enough to
be manageable. (One exception is that I've added the full version of
`isMnemonicVPTPredicable` in the AsmParser, because it seemed
pointless to carefully split it up.)
Reviewers: dmgreen, samparker, SjoerdMeijer, t.p.northover
Subscribers: javed.absar, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62669
llvm-svn: 363258
This introduces a new decoding table for MVE instructions, and starts
by adding the family of scalar shift instructions that are part of the
MVE architecture extension: saturating shifts within a single GPR, and
long shifts across a pair of GPRs (both saturating and normal).
Some of these shift instructions have only 3-bit register fields in
the encoding, with the low bit fixed. So they can only address an odd
or even numbered GPR (depending on the operand), and therefore I add
two new register classes, GPREven and GPROdd.
Differential Revision: https://reviews.llvm.org/D62668
Change-Id: Iad95d5f83d26aef70c674027a184a6b1e0098d33
llvm-svn: 363051
This adds support for the new family of conditional selection /
increment / negation instructions; the low-overhead branch
instructions (e.g. BF, WLS, DLS); the CLRM instruction to zero a whole
list of registers at once; the new VMRS/VMSR and VLDR/VSTR
instructions to get data in and out of 8.1-M system registers,
particularly including the new VPR register used by MVE vector
predication.
To support this, we also add a register name 'zr' (used by the CSEL
family to force one of the inputs to the constant 0), and operand
types for lists of registers that are also allowed to include APSR or
VPR (used by CLRM). The VLDR/VSTR instructions also need a new
addressing mode.
The low-overhead branch instructions exist in their own separate
architecture extension, which we treat as enabled by default, but you
can say -mattr=-lob or equivalent to turn it off.
Reviewers: dmgreen, samparker, SjoerdMeijer, t.p.northover
Reviewed By: samparker
Subscribers: miyuki, javed.absar, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62667
llvm-svn: 363039
These caused a build failure because I managed not to notice they
depended on a later unpushed commit in my current stack. Sorry about
that.
llvm-svn: 362956
This should have been part of r362953, but I had a finger-trouble
incident and committed the old rather than new version of the patch.
Sorry.
llvm-svn: 362955
This adds support for the new family of conditional selection /
increment / negation instructions; the low-overhead branch
instructions (e.g. BF, WLS, DLS); the CLRM instruction to zero a whole
list of registers at once; the new VMRS/VMSR and VLDR/VSTR
instructions to get data in and out of 8.1-M system registers,
particularly including the new VPR register used by MVE vector
predication.
To support this, we also add a register name 'zr' (used by the CSEL
family to force one of the inputs to the constant 0), and operand
types for lists of registers that are also allowed to include APSR or
VPR (used by CLRM). The VLDR/VSTR instructions also need some new
addressing modes.
The low-overhead branch instructions exist in their own separate
architecture extension, which we treat as enabled by default, but you
can say -mattr=-lob or equivalent to turn it off.
Reviewers: dmgreen, samparker, SjoerdMeijer, t.p.northover
Reviewed By: samparker
Subscribers: miyuki, javed.absar, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62667
llvm-svn: 362953
Arm v8.1-M supports the VMOV instructions that move a half-precision
value to and from a GPR, but not if the GPR is SP or PC.
To fix this, I've changed those instructions to use the rGPR register
class instead of GPR. rGPR always excludes PC, and it excludes SP
except in the presence of the HasV8Ops target feature (i.e. Arm v8-A).
So the effect is that VMOV.F16 to and from PC is now illegal
everywhere, but VMOV.F16 to and from SP is illegal only on non-v8-A
cores (which I believe is all as it should be).
Reviewers: dmgreen, samparker, SjoerdMeijer, ostannard
Reviewed By: ostannard
Subscribers: ostannard, javed.absar, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60704
llvm-svn: 362942
The MVE extension in Arm v8.1-M permits the use of some move, load and
store isntructions which access the FP registers, even if there's no
actual FP support in the processor (in particular, if you have the
integer-only version of MVE).
Therefore, we need separate subtarget features to condition those
instructions on, which are implied by both FP and MVE but are not part
of either.
Patch mostly by Simon Tatham.
Differential Revision: https://reviews.llvm.org/D60694
llvm-svn: 362088
Those two subtarget features were awkward because their semantics are
reversed: each one indicates the _lack_ of support for something in
the architecture, rather than the presence. As a consequence, you
don't get the behavior you want if you combine two sets of feature
bits.
Each SubtargetFeature for an FP architecture version now comes in four
versions, one for each combination of those options. So you can still
say (for example) '+vfp2' in a feature string and it will mean what
it's always meant, but there's a new string '+vfp2d16sp' meaning the
version without those extra options.
A lot of this change is just mechanically replacing positive checks
for the old features with negative checks for the new ones. But one
more interesting change is that I've rearranged getFPUFeatures() so
that the main FPU feature is appended to the output list *before*
rather than after the features derived from the Restriction field, so
that -fp64 and -d32 can override defaults added by the main feature.
Reviewers: dmgreen, samparker, SjoerdMeijer
Subscribers: srhines, javed.absar, eraman, kristof.beyls, hiraditya, zzheng, Petar.Avramovic, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D60691
llvm-svn: 361845
R_ARM_NONE can be used to create references among sections. When
--gc-sections is used, the referenced section will be retained if the
origin section is retained.
Add a generic MCFixupKind FK_NONE as this kind of no-op relocation is
ubiquitous on ELF and COFF, and probably available on many other binary
formats. See D62014.
Reviewed By: peter.smith
Differential Revision: https://reviews.llvm.org/D61992
llvm-svn: 360980
The 3-field form was introduced by D3499 in 2014 and the legacy 2-field
form was planned to be removed in LLVM 4.0
For the textual format, this patch migrates the existing 2-field form to
use the 3-field form and deletes the compatibility code.
test/Verifier/global-ctors-2.ll checks we have a friendly error message.
For bitcode, lib/IR/AutoUpgrade UpgradeGlobalVariables will upgrade the
2-field form (add i8* null as the third field).
Reviewed By: rnk, dexonsmith
Differential Revision: https://reviews.llvm.org/D61547
llvm-svn: 360742
Using SP in this position is unpredictable in ARMv7. CMP and CMN are not
affected, and of course v8 relaxes this requirement, but that's handled
elsewhere.
llvm-svn: 360242
This fixes the https://bugs.llvm.org/show_bug.cgi?id=41355.
Previously with -r we printed relocation section name instead of the target section name.
It was like this: "RELOCATION RECORDS FOR [.rel.text]"
Now it is: "RELOCATION RECORDS FOR [.text]"
Also when relocation target section has more than one relocation section,
we did not combine the output. Now we do.
Differential revision: https://reviews.llvm.org/D61312
llvm-svn: 360143
This improves readability and the behavior is consistent with GNU objdump.
The new test test/tools/llvm-objdump/X86/disassemble-section-name.s
checks we print newlines before and after "Disassembly of section ...:"
Differential Revision: https://reviews.llvm.org/D61127
llvm-svn: 359668
-t is --symbols in llvm-readobj but --section-details (unimplemented) in readelf.
The confusing option should not be used since we aim for improving
compatibility.
Keep just one llvm-readobj -t use case in test/tools/llvm-readobj/symbols.test
llvm-svn: 359661
We use both -long-option and --long-option in tests. Switch to --long-option for consistency.
In the "llvm-readelf" mode, -long-option is discouraged as it conflicts with grouped short options and it is not accepted by GNU readelf.
While updating the tests, change llvm-readobj -s to llvm-readobj -S to reduce confusion ("s" is --section-headers in llvm-readobj but --symbols in llvm-readelf).
llvm-svn: 359649
The manual says that Thumb2 add/sub instructions are only allowed to modify sp
if the first source is also sp. This is slightly different from the usual rGPR
restriction since it's context-sensitive, so implement it in C++.
llvm-svn: 358987
Another attempt to land the changes in debug line header to prevent duplicate
files in Dwarf 5. I rolled back my previous commit because of a mistake in
generating the object file in a test. Meanwhile, I addressed some offline
comments and changed the implementation; the largest difference is that
MCDwarfLineTableHeader does not keep DwarfVersion but gets it as a parameter. I
also merged the patch to fix two lld tests that will strt to fail into this
patch.
Original Commit:
https://reviews.llvm.org/D59515
Original Message:
Motivation: In previous dwarf versions, file name indexes started from 1, and
the primary source file was not explicit. Dwarf 5 standard (6.2.4) prescribes
the primary source file to be explicitly given an entry with an index number 0.
The current implementation honors the specification by just duplicating the
main source file, once with index number 0, and later maybe with another
index number. While this is compliant with the letter of the standard, the
duplication causes problems for consumers of this information such as lldb.
(Some files are duplicated, where only some of them have a line table although
all refer to the same file)
With this change, dwarf 5 debug line section files always start from 0, and
the zeroth entry is not duplicated whenever possible. This requires different
handling of dwarf 4 and dwarf 5 during generation (e.g. when a function returns
an index zero for a file name, it signals an error in dwarf 4, but not in dwarf
5) However, I think the minor complication is worth it, because it enables all
consumers (lldb, gdb, dwarfdump, objdump, and so on) to treat all files in the
file name list homogenously.
llvm-svn: 358732
This reverts commit rL357020.
The commit broke the test llvm/test/tools/llvm-objdump/embedded-source.test
on some builds including clang-ppc64be-linux-multistage,
clang-s390x-linux, clang-with-lto-ubuntu, clang-x64-windows-msvc,
llvm-clang-lld-x86_64-scei-ps4-windows10pro-fast (and others).
llvm-svn: 357026
Reapply rL356941 after regenerating the object file in the failing test
llvm/test/tools/llvm-objdump/embedded-source.test from source.
Original commit message:
[llvm] Prevent duplicate files in debug line header in dwarf 5.
Motivation: In previous dwarf versions, file name indexes started from 1, and
the primary source file was not explicit. Dwarf 5 standard (6.2.4) prescribes
the primary source file to be explicitly given an entry with an index number 0.
The current implementation honors the specification by just duplicating the
main source file, once with index number 0, and later maybe with another
index number. While this is compliant with the letter of the standard, the
duplication causes problems for consumers of this information such as lldb.
(Some files are duplicated, where only some of them have a line table although
all refer to the same file)
With this change, dwarf 5 debug line section files always start from 0, and
the zeroth entry is not duplicated whenever possible. This requires different
handling of dwarf 4 and dwarf 5 during generation (e.g. when a function returns
an index zero for a file name, it signals an error in dwarf 4, but not in dwarf 5)
However, I think the minor complication is worth it, because it enables all
consumers (lldb, gdb, dwarfdump, objdump, and so on) to treat all files in the
file name list homogenously.
Tags: #llvm, #debug-info
Differential Revision: https://reviews.llvm.org/D59515
llvm-svn: 357018
Summary:
Motivation: In previous dwarf versions, file name indexes started from 1, and
the primary source file was not explicit. Dwarf 5 standard (6.2.4) prescribes
the primary source file to be explicitly given an entry with an index number 0.
The current implementation honors the specification by just duplicating the
main source file, once with index number 0, and later maybe with another
index number. While this is compliant with the letter of the standard, the
duplication causes problems for consumers of this information such as lldb.
(Some files are duplicated, where only some of them have a line table although
all refer to the same file)
With this change, dwarf 5 debug line section files always start from 0, and
the zeroth entry is not duplicated whenever possible. This requires different
handling of dwarf 4 and dwarf 5 during generation (e.g. when a function returns
an index zero for a file name, it signals an error in dwarf 4, but not in dwarf 5)
However, I think the minor complication is worth it, because it enables all
consumers (lldb, gdb, dwarfdump, objdump, and so on) to treat all files in the
file name list homogenously.
Reviewers: dblaikie, probinson, aprantl, espindola
Reviewed By: probinson
Subscribers: emaste, jvesely, nhaehnle, aprantl, javed.absar, arichardson, hiraditya, MaskRay, rupprecht, jdoerfert, llvm-commits
Tags: #llvm, #debug-info
Differential Revision: https://reviews.llvm.org/D59515
llvm-svn: 356941
The indexed variant of vfmal.f16 and vfmsl.f16
instructions use the uppser bits of the indexed
operand to store the index (1 bit for the double
variant, 2 bits for the quad).
This limits the usable registers to d0 - d7 or
s0 - s15. This patch enforces this limitation.
Differential Revision: https://reviews.llvm.org/D59021
llvm-svn: 355707
Summary:
This patch will obtain the section name for symbols that refer to a section. Prior to this patch the Name field for STT_SECTIONs was blank, now it is populated.
Before:
```
Symbol table '.symtab' contains 6 entries:
Num: Value Size Type Bind Vis Ndx Name
0: 0000000000000000 0 NOTYPE LOCAL DEFAULT UND
1: 0000000000000000 0 SECTION LOCAL DEFAULT 1
2: 0000000000000000 0 SECTION LOCAL DEFAULT 3
3: 0000000000000000 0 SECTION LOCAL DEFAULT 4
4: 0000000000000000 0 NOTYPE GLOBAL DEFAULT UND _GLOBAL_OFFSET_TABLE_
5: 0000000000000000 0 TLS GLOBAL DEFAULT UND sym
```
With this patch:
```
Symbol table '.symtab' contains 6 entries:
Num: Value Size Type Bind Vis Ndx Name
0: 0000000000000000 0 NOTYPE LOCAL DEFAULT UND
1: 0000000000000000 0 SECTION LOCAL DEFAULT 1 .text
2: 0000000000000000 0 SECTION LOCAL DEFAULT 3 .data
3: 0000000000000000 0 SECTION LOCAL DEFAULT 4 .bss
4: 0000000000000000 0 NOTYPE GLOBAL DEFAULT UND _GLOBAL_OFFSET_TABLE_
5: 0000000000000000 0 TLS GLOBAL DEFAULT UND sym
```
This fixes PR40788
Reviewers: jhenderson, rupprecht, espindola
Reviewed By: rupprecht
Subscribers: emaste, javed.absar, arichardson, MaskRay, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D58796
llvm-svn: 355207
More or less all the instructions defined in the v8.2a full-fp16
extension are defined as UNPREDICTABLE if you put them in an IT block
(Thumb) or use with any condition other than AL (ARM). LLVM didn't
know that, and was happy to conditionalise them.
In order to force these instructions to count as not predicable, I had
to make a small Tablegen change. The code generation back end mostly
decides if an instruction was predicable by looking for something it
can identify as a predicate operand; there's an isPredicable bit flag
that overrides that check in the positive direction, but nothing that
overrides it in the negative direction.
(I considered the alternative approach of actually removing the
predicate operand from those instructions, but thought that it would
be more painful overall for instructions differing only in data type
to have different shapes of operand list. This way, the only code that
has to notice the difference is the if-converter.)
So I've added an isUnpredicable bit alongside isPredicable, and set
that bit on the right subset of FP16 instructions, and also on the
VSEL, VMAXNM/VMINNM and VRINT[ANPM] families which should be
unpredicable for all data types.
I've included a couple of representative regression tests, both of
which previously caused an fp16 instruction to be conditionalised in
ARM state and (with -arm-no-restrict-it) to be put in an IT block in
Thumb.
Reviewers: SjoerdMeijer, t.p.northover, efriedma
Reviewed By: efriedma
Subscribers: jdoerfert, javed.absar, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D57823
llvm-svn: 354768
SB (Speculative Barrier) is only mandatory from 8.5
onwards but is optional from Armv8.0-A. This patch adds a command
line option to enable SB, as it was previously only possible to
enable by selecting -march=armv8.5-a.
This patch also renames FeatureSpecRestrict to FeatureSB.
Reviewed By: olista01, LukeCheeseman
Differential Revision: https://reviews.llvm.org/D55990
llvm-svn: 350299
Summary:
This change adds a bunch of options that GNU readelf supports. There is one breaking change when invoked as `llvm-readobj`, and three breaking changes when invoked as `llvm-readelf`:
- Add --all (implies --file-header, --program-headers, etc.)
- [Breaking] -a is --all instead of --arm-attributes
- Add --file-header as an alias for --file-headers
- Replace --sections with --sections-headers, keeping --sections as an alias for it
- Add --relocs as an alias for --relocations
- Add --dynamic as an alias for --dynamic-table
- Add --segments as an alias for --program-headers
- Add --section-groups as an alias for --elf-section-groups
- Add --dyn-syms as an alias for --dyn-symbols
- Add --syms as an alias for --symbols
- Add --histogram as an alias for --elf-hash-histogram
- [Breaking] When invoked as `llvm-readelf`, -s is --symbols instead of --sections
- [Breaking] When invoked as `llvm-readelf`, -t is no longer an alias for --symbols
Reviewers: MaskRay, phosek, mcgrathr, jhenderson
Reviewed By: MaskRay, jhenderson
Subscribers: sbc100, aheejin, edd, jhenderson, silvas, echristo, compnerd, kristina, javed.absar, kristof.beyls, llvm-commits, Bigcheese
Differential Revision: https://reviews.llvm.org/D54124
llvm-svn: 346685
The ARM elf emitter would omit printing data
symbol when constant data. This patch
overrides the emitFill method as to enforce that
the symbol is correctly printed.
Differential revision: https://reviews.llvm.org/D52737
llvm-svn: 343594
Summary:
Before this change, LLVM would always describe locals on the stack as
being relative to some specific register, RSP, ESP, EBP, ESI, etc.
Variables in stack memory are pretty common, so there is a special
S_DEFRANGE_FRAMEPOINTER_REL symbol for them. This change uses it to
reduce the size of our debug info.
On top of the size savings, there are cases on 32-bit x86 where local
variables are addressed from ESP, but ESP changes across the function.
Unlike in DWARF, there is no FPO data to describe the stack adjustments
made to push arguments onto the stack and pop them off after the call,
which makes it hard for the debugger to find the local variables in
frames further up the stack.
To handle this, CodeView has a special VFRAME register, which
corresponds to the $T0 variable set by our FPO data in 32-bit. Offsets
to local variables are instead relative to this value.
This is part of PR38857.
Reviewers: hans, zturner, javed.absar
Subscribers: aprantl, hiraditya, JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D52217
llvm-svn: 343543
This adds two new barrier instructions which can be used to restrict
speculative execution of load instructions.
Patch by Pablo Barrio!
Differential revision: https://reviews.llvm.org/D52484
llvm-svn: 343300
This is a new barrier which limits speculative execution of the
instructions following it.
Patch by Pablo Barrio!
Differential revision: https://reviews.llvm.org/D52477
llvm-svn: 343213
- The assembler accepts VSTM/VLDM with register lists (specifically double registers lists) with more than 16 registers specified
- The Arm architecture reference manual says this instruction must not contain more than 16 registers when the registers are doubleword registers
- This addresses one of the concerns in https://bugs.llvm.org/show_bug.cgi?id=38389
Differential Revision: https://reviews.llvm.org/D52082
llvm-svn: 342891
The `IMAGE_REL_ARM_BRANCH20T` applies only to a `b.w` instruction. A
thumb-2 `bl` should be relocated using a `IMAGE_REL_ARM_BRANCH24T`.
Correct the relocation that we emit in such a case.
Resolves PR38620! Based on the patch by Jordan Rhee!
llvm-svn: 342109
Eliminating some duplication of rangelist dumping code at the expense of
some version-dependent code in dump and extract routines.
Reviewer: dblaikie, JDevlieghere, vleschuk
Differential revision: https://reviews.llvm.org/D51081
llvm-svn: 342048
SHF_ARM_PURECODE flag when being built with the -mexecute-only flag.
All code sections of an ELF must have the flag set for the final .text
section to be execute-only, otherwise the flag gets removed.
A HasData flag is added to MCSection to aid in the determination that
the section is empty. A virtual setTargetSectionFlags is added to
MCELFObjectTargetWriter to allow subclasses to set target specific
section flags to be added to sections which we then use in the ARM
backend to set SHF_ARM_PURECODE.
Patch by Ivan Lozano!
Reviewed By: echristo
Differential Revision: https://reviews.llvm.org/D48792
llvm-svn: 341593
Add +fp16fml feature for new FP16 instructions, which are a
mandatory part of FP16 from v8.4-A and an optional part of FP16
from v8.2-A. It doesn't seem to be possible to model this in
LLVM, but the relationship between the options is handled by
the related clang patch.
In keeping with what I think is the usual practice, the fp16fml
extension is accepted regardless of base architecture version.
Builds on/replaces Sjoerd Meijer's patch to add these instructions at
https://reviews.llvm.org/D49839.
Differential Revision: https://reviews.llvm.org/D50228
llvm-svn: 340013
ld64 supplies its own Thumb bit for Thumb functions, and intentionally zeroes
out that part of any addend in an object file. But it only does that for
symbols marked N_EXT -- i.e. external symbols. So LLVM should avoid setting
that extra bit in other cases.
llvm-svn: 339007
Contrary to ELF, we don't add any markers that distinguish data generated
with .short/.long from normal instructions, so the .inst directive only
adds compatibility with assembly that uses it.
Differential Revision: https://reviews.llvm.org/D49936
llvm-svn: 338356
Support for negative immediates was implemented in
https://reviews.llvm.org/rL298380, however few instruction options were missing.
This change adds negative immediates support and respective tests
for the following:
ADD
ADDS
ADDS.W
AND.W
ANDS
BIC.W
BICS
BICS.W
SUB
SUBS
SUBS.W
Differential Revision: https://reviews.llvm.org/D48649
llvm-svn: 336286
Mostly just adding checks for Thumb2 instructions which correspond to
ARM instructions which already had diagnostics. While I'm here, also fix
ARM-mode strd to check the input registers correctly.
Differential Revision: https://reviews.llvm.org/D48610
llvm-svn: 335909
IT instructions are allowed to have the 'AL' predicate, but it must never
result in an 'NV' predicated instruction. Essentially this means that all
branches must be 't' rather than 'e' if the predicate is 'AL'.
This patch adds a diagnostic for this during assembly (error because parsing
hits an assertion if allowed to continue) and an annotation during disassembly.
llvm-svn: 335593
This causes "permission denied" error in some controlled test environment where source tree is read-only.
Differential Revision: https://reviews.llvm.org/D47839
llvm-svn: 334114
On targets like Arm some relaxations may only be performed when certain
architectural features are available. As functions can be compiled with
differing levels of architectural support we must make a judgement on
whether we can relax based on the MCSubtargetInfo for the function. This
change passes through the MCSubtargetInfo for the function to
fixupNeedsRelaxation so that the decision on whether to relax can be made
per function. In this patch, only the ARM backend makes use of this
information. We must also pass the MCSubtargetInfo to applyFixup because
some fixups skip error checking on the assumption that relaxation has
occurred, to prevent code-generation errors applyFixup must see the same
MCSubtargetInfo as fixupNeedsRelaxation.
Differential Revision: https://reviews.llvm.org/D44928
llvm-svn: 334078
When the branch target of a Thumb2 unconditional or conditonal branch is
resolved at assembly time, no range checking is performed on the result
leading to incorrect immediates. This change adds a range check:
+- 16 Megabytes for unconditional branches, +- 1 Megabyte for the
conditional branch.
Differential Revision: https://reviews.llvm.org/D46306
llvm-svn: 333997
The Thumb BL range is + or - either 16 Megabytes or 4 Megabytes depending
on whether the CPU supports Thumb2 or the v8-m baseline ops. The existing
check for BL range is incorrectly set at +- 32 Megabytes. This change
corrects the higher range and uses the lower range if the featurebits
don't have the necessary support for it.
Differential Revision: https://reviews.llvm.org/D46305
llvm-svn: 333991
Avoid requirement that number of values must be known at assembler
time.
Fixes PR33586.
Reviewers: rnk, peter.smith, echristo, jyknight
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D46703
llvm-svn: 332741
In order to set breakpoints on labels and list source code around
labels, we need collect debug information for labels, i.e., label
name, the function label belong, line number in the file, and the
address label located. In order to keep these information in LLVM
IR and to allow backend to generate debug information correctly.
We create a new kind of metadata for labels, DILabel. The format
of DILabel is
!DILabel(scope: !1, name: "foo", file: !2, line: 3)
We hope to keep debug information as much as possible even the
code is optimized. So, we create a new kind of intrinsic for label
metadata to avoid the metadata is eliminated with basic block.
The intrinsic will keep existing if we keep it from optimized out.
The format of the intrinsic is
llvm.dbg.label(metadata !1)
It has only one argument, that is the DILabel metadata. The
intrinsic will follow the label immediately. Backend could get the
label metadata through the intrinsic's parameter.
We also create DIBuilder API for labels to be used by Frontend.
Frontend could use createLabel() to allocate DILabel objects, and use
insertLabel() to insert llvm.dbg.label intrinsic in LLVM IR.
Differential Revision: https://reviews.llvm.org/D45024
Patch by Hsiangkai Wang.
llvm-svn: 331841
Summary:
Patch https://reviews.llvm.org/D44467 implements conversion of invalid
vmov instructions into valid ones. It turned out that some valid
instructions also get converted, for example
vmov.i64 d2, #0xff00ff00ff00ff00 ->
vmov.i16 d2, #0xff00
Such behavior is incorrect because according to the ARM ARM section
F2.7.7 Modified immediate constants in T32 and A32 Advanced SIMD
instructions, "On assembly, the data type must be matched in the table
if possible."
This patch fixes the isNEONmovReplicate check so that the above
instruction is not modified any more.
Reviewers: rengolin, olista01
Reviewed By: rengolin
Subscribers: javed.absar, kristof.beyls, rogfer01, llvm-commits
Differential Revision: https://reviews.llvm.org/D44678
llvm-svn: 329158
DWARF v5 specifies that the root file (also given in the DW_AT_name
attribute of the compilation unit DIE) should be emitted explicitly to
the line table's list of files. This makes the line table more
independent of the .debug_info section.
We emit the new syntax only for DWARF v5 and later.
Fixes the bug found by asan. Also XFAIL the new test for Darwin, which
is stuck on DWARF v2, and fix up other tests so they stop failing on
Windows. Last but not least, don't break "clang -g" of an assembler
file that has .file directives in it.
Differential Revision: https://reviews.llvm.org/D44054
llvm-svn: 328805
This reverts commit r328676.
Commit r328676 broke the -no-integrated-as flag necessary to build Linux kernel with Clang:
$ cat t.c
void foo() {}
$ clang -no-integrated-as -c t.c -g
/tmp/t-dcdec5.s: Assembler messages:
/tmp/t-dcdec5.s:8: Error: file number less than one
clang-7.0: error: assembler command failed with exit code 1 (use -v to see invocation)
llvm-svn: 328699
DWARF v5 specifies that the root file (also given in the DW_AT_name
attribute of the compilation unit DIE) should be emitted explicitly to
the line table's list of files. This makes the line table more
independent of the .debug_info section.
Fixes the bug found by asan. Also XFAIL the new test for Darwin, which
is stuck on DWARF v2, and fix up other tests so they stop failing on
Windows. Last but not least, don't break "clang -g" of an assembler
file that has .file directives in it.
Differential Revision: https://reviews.llvm.org/D44054
llvm-svn: 328676
Summary:
Currently the LLVM MC assembler is able to convert e.g.
vmov.i32 d0, #0xabababab
(which is technically invalid) into a valid instruction
vmov.i8 d0, #0xab
this patch adds support for vmov.i64 and for cases with the resulting
load types other than i8, e.g.:
vmov.i32 d0, #0xab00ab00 ->
vmov.i16 d0, #0xab00
Reviewers: olista01, rengolin
Reviewed By: rengolin
Subscribers: rengolin, javed.absar, kristof.beyls, rogfer01, llvm-commits
Differential Revision: https://reviews.llvm.org/D44467
llvm-svn: 327709
Summary:
Currently the check is incorrect and the following invalid
instruction is accepted and incorrectly assembled:
vmov.i32 d2, #0x00a500a6
This patch fixes the issue.
Reviewers: olista01, rengolin
Reviewed By: rengolin
Subscribers: SjoerdMeijer, javed.absar, rogfer01, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D44460
llvm-svn: 327704
This patch starts simplifying the handling of .symver.
For now it just moves the responsibility for creating an alias down to
the streamer. With that the asm streamer can pass a .symver unchanged,
which is nice since gas cannot parse "foo@bar = zed".
In a followup I hope to move the handling down to the writer so that
we don't need special hacks for avoiding breaking names with @@@ on
windows.
llvm-svn: 327101
Fixes the bug found by asan. Also XFAIL the new test for Darwin,
which is stuck on DWARF v2, and fix up other tests so they stop
failing on Windows.
llvm-svn: 326839
This patch handling:
Enable parsing of raw encodings of system registers .
Allows UNPREDICTABLE sysregs to be decoded to a raw number in the same way that disasslib does, rather than llvm crashing.
Disassemble msr/mrs with unpredictable sysregs as SoftFail.
Fix regression due to SoftFailing some encodings.
Patch by Chris Ryder
Differential revision:https://reviews.llvm.org/D43374
llvm-svn: 326803
DWARF v5 specifies that the root file (also given in the DW_AT_name
attribute of the compilation unit DIE) should be emitted explicitly to
the line table's list of files. This makes the line table more
independent of the .debug_info section.
Differential Revision: https://reviews.llvm.org/D44054
llvm-svn: 326758
These instructions require that the two S registers are adjacent (but not the R
registers), because only the first register is included in the encoding, but we
were not checking this in the assembler.
Differential revision: https://reviews.llvm.org/D44084
llvm-svn: 326696
In DWARF v5 the Line Number Program Header is extensible, allowing values with
new content types. In this extension a content type is added,
DW_LNCT_LLVM_source, which contains the embedded source code of the file.
Add new optional attribute for !DIFile IR metadata called source which contains
source text. Use this to output the source to the DWARF line table of code
objects. Analogously extend METADATA_FILE in Bitcode and .file directive in ASM
to support optional source.
Teach llvm-dwarfdump and llvm-objdump about the new values. Update the output
format of llvm-dwarfdump to make room for the new attribute on file_names
entries, and support embedded sources for the -source option in llvm-objdump.
Differential Revision: https://reviews.llvm.org/D42765
llvm-svn: 325970
The llvm assembly parser and gas both accept "@notype" in the .type
assembly directive, but we were printing it as "@no_type", which isn't
accepted by either assembler.
Differential revision: https://reviews.llvm.org/D43116
llvm-svn: 324731
Emitting the correct (root of compilation) file at index 0 will be
posted for review later; I wanted to get this minor change out of the
way first.
llvm-svn: 324669
The major visible difference here is that in line-table dumps,
directory and file names are wrapped in double-quotes; previously,
directory names got single quotes and file names were not quoted at
all.
The improvement in this patch is that when a DWARF v5 line table
header has indirect strings, in a verbose dump these will all have
their section[offset] printed as well as the name itself. This
matches the format used for dumping strings in the .debug_info
section.
Differential Revision: https://reviews.llvm.org/D42802
llvm-svn: 324270
This fixes bugzilla 33011
https://bugs.llvm.org/show_bug.cgi?id=33011
Defines bits {19-16} as zero or unpredictable as specified by the ARM ARM in
sections A8.8.116 and A8.8.117.
It fixes also the usage of PC register as destination register for MVN
register-shifted register version as specified in A8.8.117.
Differential Revision: https://reviews.llvm.org/D41905
llvm-svn: 323954
The compilation directory has always been #0, but as of DWARF v5 it is
explicitly listed in the line-table section instead of implicitly
being a reference to the compile_unit DIE's DW_AT_comp_dir attribute.
This means the dumper should number the dumped array starting with 0
or 1 depending on the DWARF version of the line table.
References in the generated DWARF are correct, it's just the dumper
that was wrong. Also some assembler-coded tests were similarly
confused about directory numbers.
llvm-svn: 322884
Currently the assembler would accept, e.g. `ldr r0, [s0, #12]` and similar.
This patch add checks that only general-purpose registers are used in address
operands, shifted registers, and shift amounts.
Differential revision: https://reviews.llvm.org/D39910
llvm-svn: 321866
Wide Thumb2 instructions should be emitted into the object file as pairs of
16-bit words of the appropriate endianness, not one 32-bit word.
Differential revision: https://reviews.llvm.org/D41185
llvm-svn: 321799
As part of the unification of the debug format and the MIR format, print
MBB references as '%bb.5'.
The MIR printer prints the IR name of a MBB only for block definitions.
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)->getNumber\(\)/" << printMBBReference(*\1)/g'
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)\.getNumber\(\)/" << printMBBReference(\1)/g'
* find . \( -name "*.txt" -o -name "*.s" -o -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#([0-9]+)/%bb.\1/g'
* grep -nr 'BB#' and fix
Differential Revision: https://reviews.llvm.org/D40422
llvm-svn: 319665
This is causing a failure in the llvm-clang-x86_64-expensive-checks-win
buildbot, and I can't reproduce it locally, so reverting until I can work out
what is wrong.
llvm-svn: 319654
This adds a "invalid operands for instruction" diagnostic for
instructions where there is an instruction encoding with the correct
mnemonic and which is available for this target, but where multiple
operands do not match those which were provided. This makes it clear
that there is some combination of operands that is valid for the current
target, which the default diagnostic of "invalid instruction" does not.
Since this is a very general error, we only emit it if we don't have a
more specific error.
Differential revision: https://reviews.llvm.org/D36747
llvm-svn: 319649
This will allow compilation of assembly files targeting armv7e-m without having
to specify the Tag_CPU_arch attribute as a workaround.
Differential revision: https://reviews.llvm.org/D40370
Patch by Ian Tessier!
llvm-svn: 319303
These are pre-UAL syntax, and we don't support any other pre-UAL instructions,
with the exception of FLDMX/FSTMX, which don't have a UAL equivalent. Therefore
there's no reason to keep them or their AsmParser hacks around.
With the AsmParser hacks removed, the FLDMX and FSTMX instructions get the same
operand diagnostics as the UAL instructions.
Differential revision: https://reviews.llvm.org/D39196
llvm-svn: 318777
Simon Tatham