running watchos. These tests cannot run on normal customer devices,
but I hope to some day have a public facing bot running against a
device.
llvm-svn: 314355
in TestDataFormatterSkipSummary.py - I'm building this test
with the default c++ library.
Skip TestMTCSimple.py when running for i386.
llvm-svn: 314155
Normal customer devices won't be able to run these tests, we're hoping to get
a public facing bot set up at some point. Both devices pass the testsuite without
any errors or failures.
I have seen some instability with the armv7 test runs, I may submit additional patches
to address this. arm64 looks good.
I'll be watching the bots for the rest of today; if any problems are introduced by
this patch I'll revert it - if anyone sees a problem with their bot that I don't
see, please do the same. I know it's a rather large patch.
One change I had to make specifically for iOS devices was that debugserver can't
create files. There were several tests that launch the inferior process redirecting
its output to a file, then they retrieve the file. They were not trying to test
file redirection in these tests, so I rewrote those to write their output to a file
directly.
llvm-svn: 314132
Normal customer devices won't be able to run these devices, we're hoping to get
a public facing bot set up at some point. Both devices pass the testsuite without
any errors or failures.
I have seen some instability with the armv7 test runs, I may submit additional patches
to address this. arm64 looks good.
I'll be watching the bots for the rest of today; if any problems are introduced by
this patch I'll revert it - if anyone sees a problem with their bot that I don't
see, please do the same. I know it's a rather large patch.
One change I had to make specifically for iOS devices was that debugserver can't
create files. There were several tests that launch the inferior process redirecting
its output to a file, then they retrieve the file. They were not trying to test
file redirection in these tests, so I rewrote those to write their output to a file
directly.
llvm-svn: 314038
Normal customer devices won't be able to run these devices, we're hoping to get
a public facing bot set up at some point.
There will be some smaller follow-on patches. The changes to tools/lldb-server are
verbose and I'm not thrilled with having to skip all of these tests manually.
There are a few places where I'm making the assumption that "armv7", "armv7k", "arm64"
means it's an ios device, and I need to review & clean these up with an OS check
as well. (Android will show up as "arm" and "aarch64" so by pure luck they shouldn't
cause problems, but it's not an assumption I want to rely on).
I'll be watching the bots for the rest of today; if any problems are introduced by
this patch I'll revert it - if anyone sees a problem with their bot that I don't
see, please do the same. I know it's a rather large patch.
One change I had to make specifically for iOS devices was that debugserver can't
create files. There were several tests that launch the inferior process redirecting
its output to a file, then they retrieve the file. They were not trying to test
file redirection in these tests, so I rewrote those to write their output to a file
directly.
llvm-svn: 313932
The main change is to avoid setting the process state as running when
debugging core/minidumps (details in the bug). Also included a few small,
related fixes around how the errors propagate in this case.
Fixed the FreeBSD/Windows break: the intention was to keep
Process::WillResume() and Process::DoResume() "in-sync", but this had the
unfortunate consequence of breaking Process sub-classes which don't override
WillResume().
The safer approach is to keep Process::WillResume() untouched and only
override it in the minidump and core implementations.
patch by lemo
Bug: https://bugs.llvm.org/show_bug.cgi?id=34532
Differential Revision: https://reviews.llvm.org/D37651
llvm-svn: 313655
When introduced, breakpoint names were just tags that you could
apply to breakpoints that would allow you to refer to a breakpoint
when you couldn't capture the ID, or to refer to a collection of
breakpoints.
This change makes the names independent holders of breakpoint options
that you can then apply to breakpoints when you add the name to the
breakpoint. It adds the "breakpoint name configure" command to set
up or reconfigure breakpoint names. There is also full support for
then in the SB API, including a new SBBreakpointName class.
The connection between the name and the breakpoints
sharing the name remains live, so if you reconfigure the name, all the
breakpoint options all change as well. This allows a quick way
to share complex breakpoint behavior among a bunch of breakpoints, and
a convenient way to iterate on the set.
You can also create a name from a breakpoint, allowing a quick way
to copy options from one breakpoint to another.
I also added the ability to make hidden and delete/disable protected
names. When applied to a breakpoint, you will only be able to list,
delete or disable that breakpoint if you refer to it explicitly by ID.
This feature will allow GUI's that need to use breakpoints for their
own purposes to keep their breakpoints from getting accidentally
disabled or deleted.
<rdar://problem/22094452>
llvm-svn: 313292
The auto-continue test was using the new (better) name
for providing commands (-C) but I haven't checked in that change
yet. Put the test back to the old way for now.
llvm-svn: 313221
The main change is to avoid setting the process state as running when
debugging core/minidumps (details in the bug).
Also included a few small, related fixes around how the errors propagate in
this case.
patch by lemo
Bug: https://bugs.llvm.org/show_bug.cgi?id=34532
Differential Revision: https://reviews.llvm.org/D37651
llvm-svn: 313210
On Windows a process can't delete its own current direcotry, that's why the test
needs to return to the original direcotry before removing newdir.
llvm-svn: 313113
Summary:
Test was skipped because -data-evaluate-expression was thought
to not work on globals. This is not the case - the issue was clang
removes debug info for globals in cpp files that are not used.
Add a reference to the globals in question, and fix memory patter in
test to match memory pattern in testcase.
Reviewers: ki.stfu, abidh
Reviewed By: ki.stfu
Subscribers: aprantl, lldb-commits
Differential Revision: https://reviews.llvm.org/D37533
llvm-svn: 312726
The FXSAVE member `ftw` (FPU Tag Word) was given the wrong size (8-bit)
instead of the correct width (16-bit) as per the x87 Programmer's
Manual. Adjust this to ensure that we print out the complete value for
the register.
llvm-svn: 311579
The Linux xfail decorator was removed in r272326 with the claim that the
test "runs reliably on the linux x86 buildbot." It also runs reliably on
FreeBSD for me.
llvm.org/pr25925
llvm-svn: 310644
This test is consistently reporting unexpected pass for me on FreeBSD
10 and 12. It was failing on the old FreeBSD buildbot which has now been
retired for some time. Will investigate further if this fails once a new
buildbot is configured and running tests.
llvm.org/pr17807
llvm-svn: 310626
This is the FreeBSD equivalent of r238549.
This serves 2 purposes:
* LLDB should handle inferior process signals SIGSEGV/SIGILL/SIGBUS/
SIGFPE the way it is suppose to be handled. Prior to this fix these
signals will neither create a coredump, nor exit from the debugger
or work for signal handling scenario.
* eInvalidCrashReason need not report "unknown crash reason" if we have
a valid si_signo
llvm.org/pr23699
Patch by Karnajit Wangkhem
Differential Revision: https://reviews.llvm.org/D35223
llvm-svn: 310591
Summary:
The available platform list was previously only accessible via the
`platform list` command, this patch makes it possible to access that
list via the SBDebugger API. The active platform list has likewise
been exposed via the SBDebugger API.
Differential Revision: https://reviews.llvm.org/D35760
llvm-svn: 310452
You can get a breakpoint to auto-continue by adding "continue"
as a command, but that has the disadvantage that if you hit two
breakpoints simultaneously, the continue will force the process
to continue, and maybe even forstalling the commands on the other.
The auto-continue flag means the breakpoints can negotiate about
whether to stop.
Writing tests, I wanted to supply some commands when I made the
breakpoints, so I also added that ability.
llvm-svn: 309969
When an option was set at on a location, I was just copying the whole option set
to the location, and letting it shadow the breakpoint options. That was wrong since
it meant changes to unrelated options on the breakpoint would no longer take on this
location. I added a mask of set options and use that for option propagation.
I also added a "location" property to breakpoints, and added SBBreakpointLocation.{G,S}etCommandLineCommands
since I wanted to use them to write some more test cases.
<rdar://problem/24397798>
llvm-svn: 309772
Summary:
Implement SBProcessInfo to wrap lldb_private::ProcessInstanceInfo,
and add SBProcess::GetProcessInfo() to retrieve info like parent ID,
group ID, user ID etc. from a live process.
Differential Revision: https://reviews.llvm.org/D35881
llvm-svn: 309664
Now -shlib flag can be provided alongside with names of symbols files:
(lldb) target symbols add --shlib stripper-lib.so unstripper-lib.so
This is helpful when default matching mechanisms by name and UUID
can't find a module, and the user needs to explicitly specify
which module the given symbol file belongs to.
Differential Revision: https://reviews.llvm.org/D35607
llvm-svn: 308933
This reapplies https://reviews.llvm.org/D35740 with a tweak to find
the section by name rather than type. Section types don't distinguish
between regular sections and their DWO counterparts.
llvm-svn: 308905
The DWO handling code can get confused by clang modules which also use
skeleton CUs to point to the object file with the full debug
info. This patch detects whether an object is a "real" DWO or a clang
module and prevents LLDB from interpreting clang modules as DWO. This
fixes the regression in TestWithModuleDebugging.
http://llvm.org/bugs/show_bug.cgi?id=33875
Differential Revision: https://reviews.llvm.org/D35740
llvm-svn: 308850
Summary:
SBBreakpointLocation exposed the ignore count, but didn't expose
the hit count. Both values were exposed by SBBreakpoint and
SBWatchpoint, so this makes things a bit more consistent.
Reviewers: lldb-commits
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D31283
llvm-svn: 308480
In NativeProcessLinux::MonitorSIGTRAP we were asserting that the si_code
value is one of the codes we know about. However, that list was very
incomplete -- for example, we were not handling SI_TKILL/SI_USER,
generated by raise(SIGTRAP). A cursory examination show there are at
least a dozen codes like these that an app can generate, and more can be
added at any point.
So, instead of trying to play catchup, I change the default behavior to
treat an unknown si_code like an ordinary signal. The only reason we
needed to inspect si_code in the first place is because
watchpoint/breakpoints are notified as SIGTRAP, but we already know
about those, and us starting to use a new debug event is far less likely
than somebody introducing a new non-debug event.
I add a test case to TestRaise to verify we are handling raise(SIGTRAP)
in an application properly.
llvm-svn: 307644
Starting with android ndk r15, clang much more tests are affected by the
-mstackrealign bugl (now nearly all functions are affected, and not just
the ones requiring 16-byte alignment). Due to their numbers, Xfailing
all of them is not a viable option, so we will just have to declare this
configuration unsupported, and wait until ndk ships a clang version that
has this bug fixed.
llvm-svn: 307252
to make a target, set a source regex breakpoint, run to
the breakpoint and find the thread that hit the breakpoint.
Start the process of replacing the boiler plate with this
routine.
llvm-svn: 307234
This adds a simple testcase for MainThreadCheckerRuntime. The tool (Main Thread Checker) is only available on Darwin, so the test also detects the presence of libMainThreadChecker.dylib and is skipped if the tool is not available.
llvm-svn: 307170