From a user prospective, it forces the use of an annoying nullptr to mark the end of the vararg, and there's not type checking on the arguments.
The variadic template is an obvious solution to both issues.
Differential Revision: https://reviews.llvm.org/D31070
llvm-svn: 299949
Module::getOrInsertFunction is using C-style vararg instead of
variadic templates.
From a user prospective, it forces the use of an annoying nullptr
to mark the end of the vararg, and there's not type checking on the
arguments. The variadic template is an obvious solution to both
issues.
llvm-svn: 299925
We were removing comdats from externalized functions (function declarations
can't be comdat), but were not doing the same for variable. Failure to do this
would cause bugpoint to fail ("Declaration may not be in a Comdat!").
llvm-svn: 299908
LLVM makes several assumptions about address space 0. However,
alloca is presently constrained to always return this address space.
There's no real way to avoid using alloca, so without this
there is no way to opt out of these assumptions.
The problematic assumptions include:
- That the pointer size used for the stack is the same size as
the code size pointer, which is also the maximum sized pointer.
- That 0 is an invalid, non-dereferencable pointer value.
These are problems for AMDGPU because alloca is used to
implement the private address space, which uses a 32-bit
index as the pointer value. Other pointers are 64-bit
and behave more like LLVM's notion of generic address
space. By changing the address space used for allocas,
we can change our generic pointer type to be LLVM's generic
pointer type which does have similar properties.
llvm-svn: 299888
When dumping classes, show where padding occurs, and at the end of the
class print statistics about how many bytes total of padding exist in a
class.
Since PDB doesn't specifically contain information about padding, we have
to mimic this by sort of reversing a small portion of the record layout
algorithm (e.g. looking at offsets and sizes and trying to determine
whether something is part of the same field or a new field).
Differential Revision: https://reviews.llvm.org/D31800
llvm-svn: 299869
* Adds support for pointers to arrays, which was missing
* Adds some tests
* Improves consistency of const and volatile qualifiers
* Eliminates non-composable special case code for arrays and function by using
a more general recursive approach
* Has a hack for getting the calling convention into the right spot for
pointer-to-functions
Given the rapid changes happenning in llvm-pdbdump, this may be difficult to
merge.
Differential Revision: https://reviews.llvm.org/D31832
llvm-svn: 299848
1. Added some asserts to make sure concrete symbol types don't
get constructed with RawSymbols that have an incompatible
SymTag enum value.
2. Added new forwarding macros that auto-define an Id/Sym method
pair whenever there is a method that returns a SymIndexId.
Previously we would just provide one method that returned only
the SymIndexId and it was up to the caller to use the Session
object to get a pointer to the symbol. Now we automatically
get both the method that returns the Id, as well as a method
that returns the pointer directly with just one macro.
3. Added some methods for dumping straight to stdout that can
be used from inside the debugger for diagnostics during a
debug session.
4. Added a clone() method and a cast<T>() method to PDBSymbol
that can shorten some usage patterns.
llvm-svn: 299831
Previously when dumping class definitions, there were only
two modes - on or off. But it's useful to sometimes get a
little more fine-grained. For example, you might only want
to see the record layout (for example to look for extraneous
padding). This patch adds a third mode, layout mode, which
does exactly that. Only this-relative data members are
displayed in this mode.
Differential Revision: https://reviews.llvm.org/D31794
llvm-svn: 299733
Previously we just had the -types option, which would dump all
classes, typedefs, and enums. But this produces a lot of output
if you only want to view classes, for example. This patch breaks
this down into 3 additional options, -classes, -enums, and
-typedefs, and keeps the -types option around which implies all
3 more specific options.
Differential Revision: https://reviews.llvm.org/D31791
llvm-svn: 299732
Summary:
Particularly, with --delete, this can be very useful for testing
new optimizations on some hotspots, without having to run it on the whole
application. E.g. as such:
```
llvm-extract app.bc --recursive --rfunc .*hotspot.* > hotspot.bc
llvm-extract app.bc --recursive --delete --rfunc .*hotspot.* > residual.bc
llc -filetype=obj residual.bc > residual.o
llc -filetype=obj hotspot.bc > hotspot.o
cc -o app residual.o hotspot.o
```
Reviewed By: davide
Differential Revision: https://reviews.llvm.org/D31722
llvm-svn: 299706
Module::getOrInsertFunction is using C-style vararg instead of
variadic templates.
From a user prospective, it forces the use of an annoying nullptr
to mark the end of the vararg, and there's not type checking on the
arguments. The variadic template is an obvious solution to both
issues.
Patch by: Serge Guelton <serge.guelton@telecom-bretagne.eu>
Differential Revision: https://reviews.llvm.org/D31070
llvm-svn: 299699
Moving Modules into `testMergedProgram` is incorrect (and causes segmentation
faults) since all callers expect to retain ownership. This is evidenced by the
later calls to `unique_ptr<Module>::get` in the same function.
Differential Revision: https://reviews.llvm.org/D31727
llvm-svn: 299596
Note payloads are padded to a multiple of 4 bytes in size, but the size
of the string that should be print can be smaller e.g. the n_descsz
field in gold's version note is 9, so that's the whole size of the
string that should be printed. The padding is part of the format of a
SHT_NOTE section or PT_NOTE segment, but it's not part of the note
itself.
Printing the extra null bytes may confuse some tools, e.g. when the
llvm-readobj is sent to grep, it treats the output as binary because
it contains a null byte.
Differential Revision: https://reviews.llvm.org/D30804
llvm-svn: 299576
Summary:
The TypeTableBuilder provides stable storage for type records. We don't
need to copy all of the bytes into a flat vector before adding it to the
TpiStreamBuilder.
This makes addTypeRecord take an ArrayRef<uint8_t> and a hash code to go
with it, which seems like a simplification.
Reviewers: ruiu, zturner, inglorion
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D31634
llvm-svn: 299406
Summary:
MASM can produce type streams that are not topologically sorted. It can
even produce type streams with circular references, but those are not
common in practice.
Reviewers: inglorion, ruiu
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D31629
llvm-svn: 299403
Support for writing this module code was removed in r73220, which was well
before the LLVM 3.0 release, so we do not need to be able to understand it
for backwards compatibility.
Differential Revision: https://reviews.llvm.org/D31563
llvm-svn: 299370
This patch refactors the code used in llc such that all the users of the
addPassesToEmitFile API have access to a homogeneous way of handling
start/stop-after/before options right out of the box.
Previously each user would have needed to duplicate this logic and set
up its own options.
NFC
llvm-svn: 299282
This is helpful when extracting objects from archives produced by MSVC's
lib.exe, which users absolute paths to describe the archive members.
llvm-svn: 299264
Introduce symbol table data structures that can be potentially written to
disk, have the LTO library build those data structures using temporarily
constructed modules and redirect the LTO library implementation to go through
those data structures. This allows us to remove the LLVMContext and Modules
owned by InputFile.
With this change I measured a peak memory consumption decrease from 5.4GB to
2.8GB in a no-op incremental ThinLTO link of Chromium on Linux. The impact on
memory consumption is larger in COFF linkers where we are currently forced
to materialize all metadata in order to read linker options. Peak memory
consumption linking a large piece of Chromium for Windows with full LTO and
debug info decreases from >64GB (OOM) to 15GB.
Part of PR27551.
Differential Revision: https://reviews.llvm.org/D31364
llvm-svn: 299168
Summary:
Assertions assuming that function calls may not have zero durations do
not seem to hold in the wild. There are valid cases where the conversion
of the tsc counters end up becoming zero-length durations. These
assertions don't really hold and the algorithms don't need those to be
true for them to work.
Reviewers: dblaikie, echristo
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D31519
llvm-svn: 299150
Mostly this change adds support converting to and from
YAML which will allow us to write more test cases for
the WebAssembly MC and lld ports.
Better support for objdump, readelf, and nm will be in
followup CLs.
I had to update the two wasm test binaries because they
used the old style 'name' section which is no longer
supported.
Differential Revision: https://reviews.llvm.org/D31099
Patch by Sam Clegg
llvm-svn: 299101
The -output-color option was successful at suppressing color changes, but
was still allowing color resets.
Differential Revision: https://reviews.llvm.org/D31468
llvm-svn: 299006
Summary:
Currently the llvm-xray commandline tool fails to handle the case for
when no subcommand is provided in a graceful manner. This fixes that to
print the help message explaining the subcommands and the available
options.
Reviewers: pcc, pelikan
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D31409
llvm-svn: 298975
We're seeing binutils ld produce binaries where the import address
table's NameRVA entry is actually a VA instead (i.e. it's already base
relocated), which llvm-readobj then chokes on. Both dumpbin and the
Windows loader are able to handle these binaries correctly, however, and
we can make llvm-readobj handle them correctly too by iterating the
import lookup table (which doesn't have a relocated NameRVA) rather than
the import address table.
The import lookup table and the import address table are supposed to be
identical on disk, and prior to r277298 the import lookup table would be
used by `llvm-readobj -coff-imports` anyway, so this shouldn't have any
functional change (except in the case of our malformed binaries). The
import lookup table can apparently be missing when using old Borland
linkers, so fall back to the import address table in that case.
Resolves PR31766.
Differential Revision: https://reviews.llvm.org/D31362
llvm-svn: 298812
Summary: MSVC does this when producing a PDB.
Reviewers: ruiu
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D31316
llvm-svn: 298717
Summary:
When dumping these records from an object file section, we should use
only one type database. However, when dumping from a PDB, we should use
two: one for the type stream and one for the IPI stream.
Certain type records that normally live in the .debug$T object file
section get moved over to the IPI stream of the PDB file and they get
new indices.
So far, I've noticed that the MSVC linker always moves these records
into IPI:
- LF_FUNC_ID
- LF_MFUNC_ID
- LF_STRING_ID
- LF_SUBSTR_LIST
- LF_BUILDINFO
- LF_UDT_MOD_SRC_LINE
These records have index fields that can point into TPI or IPI. In
particular, LF_SUBSTR_LIST and LF_BUILDINFO point to LF_STRING_ID
records to describe compilation command lines.
I've modified the dumper to have an optional pointer to the item DB, and
to do type name lookup of these fields in that DB. See printItemIndex.
The result is that our pdbdump-headers.test is more faithful to the PDB
contents and the output is less confusing.
Reviewers: ruiu
Subscribers: amccarth, zturner, llvm-commits
Differential Revision: https://reviews.llvm.org/D31309
llvm-svn: 298649
Summary:
The cumulative size of the bitcode files for a very large application
can be huge, particularly with -g. In a distributed build environment,
all of these files must be sent to the remote build node that performs
the thin link step, and this can exceed size limits.
The thin link actually only needs the summary along with a bitcode
symbol table. Until we have a proper bitcode symbol table, simply
stripping the debug metadata results in significant size reduction.
Add support for an option to additionally emit minimized bitcode
modules, just for use in the thin link step, which for now just strips
all debug metadata. I plan to add a cc1 option so this can be invoked
easily during the compile step.
However, care must be taken to ensure that these minimized thin link
bitcode files produce the same index as with the original bitcode files,
as these original bitcode files will be used in the backends.
Specifically:
1) The module hash used for caching is typically produced by hashing the
written bitcode, and we want to include the hash that would correspond
to the original bitcode file. This is because we want to ensure that
changes in the stripped portions affect caching. Added plumbing to emit
the same module hash in the minimized thin link bitcode file.
2) The module paths in the index are constructed from the module ID of
each thin linked bitcode, and typically is automatically generated from
the input file path. This is the path used for finding the modules to
import from, and obviously we need this to point to the original bitcode
files. Added gold-plugin support to take a suffix replacement during the
thin link that is used to override the identifier on the MemoryBufferRef
constructed from the loaded thin link bitcode file. The assumption is
that the build system can specify that the minimized bitcode file has a
name that is similar but uses a different suffix (e.g. out.thinlink.bc
instead of out.o).
Added various tests to ensure that we get identical index files out of
the thin link step.
Reviewers: mehdi_amini, pcc
Subscribers: Prazek, llvm-commits
Differential Revision: https://reviews.llvm.org/D31027
llvm-svn: 298638
Adds -color-output option to llvm-pdbdump pretty commands that lets the user
specify whether the output should have color. The default depends on whether
the output is going to a TTY (per prior discussion in
https://reviews.llvm.org/D31246).
This will enable tests that pipe llvm-pdbdump output to FileCheck to work
across platforms without regard to the differences in ANSI codes.
Differential Revision: https://reviews.llvm.org/D31263
llvm-svn: 298610
- Rename runtime metadata -> code object metadata
- Make metadata not flow
- Switch enums to use ScalarEnumerationTraits
- Cleanup and move AMDGPUCodeObjectMetadata.h to AMDGPU/MCTargetDesc
- Introduce in-memory representation for attributes
- Code object metadata streamer
- Create metadata for isa and printf during EmitStartOfAsmFile
- Create metadata for kernel during EmitFunctionBodyStart
- Finalize and emit metadata to .note during EmitEndOfAsmFile
- Other minor improvements/bug fixes
Differential Revision: https://reviews.llvm.org/D29948
llvm-svn: 298552
String concatenation used in r298336 allowed to get rid of extra spaces
but also resulted in lost delimiter spaces, so use previous method.
llvm-svn: 298498
They are structurally the same, but now we need to distinguish them
because one record lives in the IPI stream and the other lives in TPI.
llvm-svn: 298474
Summary: Because SamplePGO passes will be invoked twice in ThinLTO build: once at compile phase, the other at backend. We want to make sure the IR at the 2nd phase matches the hot part in profile, thus we do not want to inline hot callsites in the first phase.
Reviewers: tejohnson, eraman
Reviewed By: tejohnson
Subscribers: mehdi_amini, llvm-commits, Prazek
Differential Revision: https://reviews.llvm.org/D31201
llvm-svn: 298428
CMake variable LLVM_DEFINITIONS collects preprocessor definitions provided
for host compiler that builds llvm components. A function
add_llvm_definitions was introduced in AddLLVMDefinitions.cmake to keep
track of these definitions and was intended to be a replacement for CMake
command add_definitions. Actually in many cases add_definitions is still
used and the content of LLVM_DEFINITIONS is not actual now. On the other
hand the current version of CMake allows getting set of definitions in a
more convenient way. This fix implements evaluation of the variable by
reading corresponding cmake property.
Differential Revision: https://reviews.llvm.org/D31125
llvm-svn: 298336
and test cases for each of the error checks.
To do this more plumbing was needed so that the segment indexes and
segment offsets can be checked. Basically what was done was the SegInfo
from llvm-objdump’s MachODump.cpp was moved into libObject for Mach-O
objects as BindRebaseSegInfo and it is only created when an iterator for
bind or rebase entries are created.
This commit really only adds the error checking and test cases for the
bind table entires and the checking for the lazy bind and weak bind entries
are still to be fully done as well as the rebase entires. Though some of
the plumbing for those are added with this commit. Those other error
checks and test cases will be added in follow on commits.
Note, the two llvm_unreachable() calls should now actually be unreachable
with the error checks in place and would take a logic bug in the error
checking code to be reached if the segment indexes and segment
offsets are used from a checked bind entry. Comments have been added
to the methods that require the arguments to have been checked
prior to calling.
llvm-svn: 298292
This patch fixes two issues:
* Fixed relative links to source files
* Enumeration of lines in source files starts from 1 instead of 0 to
align with .symcov files generated by sancov -symbolize
Patch by Dmitiriy Nikiforov.
Differential Revision: https://reviews.llvm.org/D31038
llvm-svn: 298250
After the call to sys::fs::exists succeeds, indicating a cache hit, we call
AddFile and the client will open the file using the supplied path. If the
client is using cache pruning, there is a potential race between the pruner
and the client. To avoid this, change the caching API so that it provides
a MemoryBuffer to the client, and have clients use that MemoryBuffer where
possible.
This scheme won't work with the gold plugin because the plugin API expects a
file path. So we have the gold plugin use the buffer identifier as a path and
live with the race for now. (Note that the gold plugin isn't actually affected
by the problem at the moment because it doesn't support cache pruning.)
This effectively reverts r279883 modulo the change to use the existing path
in the gold plugin.
Differential Revision: https://reviews.llvm.org/D31063
llvm-svn: 298020
Summary:
I could be wrong but it seems to have no use for MinGW.
Related diff: https://reviews.llvm.org/D29772
Reviewers: chandlerc, rnk
Reviewed By: rnk
Patch by: Mateusz Mikuła
Subscribers: rnk, llvm-commits, mgorny
Differential Revision: https://reviews.llvm.org/D29952
llvm-svn: 297985
This was discovered when running `llvm-pdbdump diff` against
two files, the second of which was generated by running the
first one through pdb2yaml and then yaml2pdb.
The second one was missing some bytes from the PDB Stream, and
tracking this down showed that at the end of the PDB Stream were
some additional bytes that we were ignoring. Looking back
to the reference code, these seem to specify some additional
flags that indicate whether the PDB supports various optional
features.
This patch adds support for reading, writing, and round-tripping
these flags through YAML and the raw dumper, and updates the
tests accordingly.
llvm-svn: 297984
In doing so I discovered that we completely ignore some bytes
of the PDB Stream after we "finish" loading it. These bytes
seem to specify some additional information about what kind
of data is present in the PDB. A subsequent patch will add
code to read in those fields and store their values.
llvm-svn: 297983
Previously we did not have support for writing detailed
module information for each module, as well as the symbol
records. This patch adds support for this, and in doing
so enables the ability to construct minimal PDBs from
just a few lines of YAML. A test is added to illustrate
this functionality.
llvm-svn: 297900
This patch adds the value profile support to profile the size parameter of
memory intrinsic calls: memcpy, memcmp, and memmov.
Differential Revision: http://reviews.llvm.org/D28965
llvm-svn: 297897
Together, these allow lldb-pdbdump to list all the modules from a PDB using a
native reader (rather than DIA).
Note that I'll probably be specializing NativeRawSymbol in a subsequent patch.
Differential Revision: https://reviews.llvm.org/D30956
llvm-svn: 297883
For now this only diffs the stream directory and the MSF
Superblock. Future patches will drill down into individual
streams to find out where the differences lie.
Differential Revision: https://reviews.llvm.org/D30908
llvm-svn: 297689
Previously we could round-trip type records from PDB -> Yaml ->
PDB, but for symbols we could only go from PDB -> Yaml. This
completes the round-tripping for symbols as well.
llvm-svn: 297625
Refactor the dumping function so that we can add other value profile kind easily.
Differential Revision: https://reviews.llvm.org/D30752
llvm-svn: 297399
Summary:
This test was missing the target triple.
Once I fixed that, the case with the invalid character error stopped
returning 1 from llvm-lto2 and the test reported a failure. Fixed by
adding the missing return from llvm-lto2. Apparently we were failing
when we eventually tried to get the target.
Reviewers: pcc
Subscribers: mehdi_amini, llvm-commits
Differential Revision: https://reviews.llvm.org/D30585
llvm-svn: 297173
This patch adds support to the DWARF YAML reader and writer for the new DWARF5 abbreviation form, DW_FORM_implicit_const.
The attribute was added in r291599.
llvm-svn: 297091
Some late additions to DWARF v5 were not in Dwarf.def; also one form
was redefined. Add the new cases to relevant switches in different
parts of LLVM. Replace DW_FORM_ref_sup with DW_FORM_ref_sup[4,8].
I did not add support for DW_FORM_strx3/addrx3 other that defining the
constants. We don't have any infrastructure to support these.
Differential Revision: http://reviews.llvm.org/D30664
llvm-svn: 297085
In the DWARF 4 Spec section 7.2.2, data in many DWARF sections, and some DWARF structures start with "Initial Length Values", which are a 32-bit length, and an optional 64-bit length if the 32 bit value == UINT32_MAX.
This patch abstracts the Initial Length type in YAML, and extends its use to all the DWARF structures that are supported in the DWARFYAML code that have Initial Length values.
llvm-svn: 296911
After several smaller patches to get most of the core improvements
finished up, this patch is a straight move and header fixup of
the source.
Differential Revision: https://reviews.llvm.org/D30266
llvm-svn: 296810
Bug-Point functionality needs extending due to the patch D29185 by bd1976llvm (Allow llvm's build and test systems to support paths with spaces ). It requires Bugpoint to accept the use of spaces within ‘--compile-command’ tokens.
Details
Bugpoint uses the argument ‘--compile-command’ to pass in a command line argument as a string, the string is tokenized by the ‘lexCommand’ function using spaces as a delimiter. Patch D29185 will cause the unit test compile-custom.ll to fail as spaces are now required within tokens and as a delimiter. This patch allows the use of escape characters as below:
Two consecutive '\' evaluate to a single '\'.
A space after a '\' evaluates to a space that is not interpreted as a delimiter.
Any other instances of the '\' character are removed.
Committed on behalf of Owen Reynolds
Differential revision: https://reviews.llvm.org/D29940
llvm-svn: 296763
This is for running the assembler with -g (to emit DWARF describing
the assembler source).
Differential Revision: http://reviews.llvm.org/D30475
llvm-svn: 296541
other tables. Providing a helpful error message to what the error is and
where the error occurred based on which opcode it was associated with.
There have been handful of bug fixes dealing with bad bind info in
object files, r294021 and r249845, which only put a band aid on the
problem after a bad bind table was created after unpacking from
its compact info. In these cases a bind table should have never been
created and an error should have simply been generated.
This change puts in place the plumbing to allow checking and returning
of an error when the compact info is unpacked. This follows the model
of iterators that can fail that Lang Hanes designed when fixing the problem
for bad archives r275316 (or r275361).
This change uses one of the existing test cases that now causes an
error instead of printing <<bad library ordinal>> after a bad bind table
is created. The error uses the offset into the opcode table as shown with
the macOS dyldinfo(1) tool to indicate where the error is and which
opcode and which parameter is in error.
For example the exiting test case has this lazy binding opcode table:
% dyldinfo -opcodes test/tools/llvm-objdump/Inputs/bad-ordinal.macho-x86_64
…
lazy binding opcodes:
0x0000 BIND_OPCODE_SET_SEGMENT_AND_OFFSET_ULEB(0x02, 0x00000010)
0x0002 BIND_OPCODE_SET_DYLIB_ORDINAL_IMM(2)
In the test case the binary only has one library so setting the library
ordinal to the value of 2 in the BIND_OPCODE_SET_DYLIB_ORDINAL_IMM
opcode at 0x0002 above is an error. This now produces this error message:
% llvm-objdump -lazy-bind bad-ordinal.macho-x86_64
…
llvm-objdump: 'bad-ordinal.macho-x86_64': truncated or malformed object (for BIND_OPCODE_SET_DYLIB_ORDINAL_ULEB bad library ordinal: 2 (max 1) for opcode at: 0x2)
This change provides the plumbing for the error handling and one example
of an error message. Other error checks and test cases will be added in follow
on commits.
llvm-svn: 296527
Summary:
clang adds !srcloc metadata to inline assembly in LLVM bitcode generated
for inline assembly in C. The value of this !srcloc is passed to the
diagnostics handler if the inline assembly generates a diagnostic.
clang is able to turn this cookie back to a location in the C source
file.
To test this functionality without a dependency, make llc print the
!srcloc metadata if it is present. The added test uses this mechanism
to test that the correct !srclocs are passed to the diag handler.
Reviewers: rengolin, rnk, echristo, grosbach, mehdi_amini
Reviewed By: mehdi_amini
Subscribers: mehdi_amini, llvm-commits
Differential Revision: https://reviews.llvm.org/D30167
llvm-svn: 296465
Before the endianness was specified on each call to read
or write of the StreamReader / StreamWriter, but in practice
it's extremely rare for streams to have data encoded in
multiple different endiannesses, so we should optimize for the
99% use case.
This makes the code cleaner and more general, but otherwise
has NFC.
llvm-svn: 296415
This was reverted because it was breaking some builds, and
because of incorrect error code usage. Since the CL was
large and contained many different things, I'm resubmitting
it in pieces.
This portion is NFC, and consists of:
1) Renaming classes to follow a consistent naming convention.
2) Fixing the const-ness of the interface methods.
3) Adding detailed doxygen comments.
4) Fixing a few instances of passing `const BinaryStream& X`. These
are now passed as `BinaryStreamRef X`.
llvm-svn: 296394
This creates an llvm-mc-disassemble-fuzzer from the existing llvm-mc-fuzzer
and finishing the assemble support in llvm-mc-assemble-fuzzer.
llvm-svn: 296323
r296215, "[PDB] General improvements to Stream library."
r296217, "Disable BinaryStreamTest.StreamReaderObject temporarily."
r296220, "Re-enable BinaryStreamTest.StreamReaderObject."
r296244, "[PDB] Disable some tests that are breaking bots."
r296249, "Add static_cast to silence -Wc++11-narrowing."
std::errc::no_buffer_space should be used for OS-oriented errors for socket transmission.
(Seek discussions around llvm/xray.)
I could substitute s/no_buffer_space/others/g, but I revert whole them ATM.
Could we define and use LLVM errors there?
llvm-svn: 296258
This adds various new functionality and cleanup surrounding the
use of the Stream library. Major changes include:
* Renaming of all classes for more consistency / meaningfulness
* Addition of some new methods for reading multiple values at once.
* Full suite of unit tests for reader / writer functionality.
* Full set of doxygen comments for all classes.
* Streams now store their own endianness.
* Fixed some bugs in a few of the classes that were discovered
by the unit tests.
llvm-svn: 296215
This is part of a larger effort to get the Stream code moved
up to Support. I don't want to do it in one large patch, in
part because the changes are so big that it will treat everything
as file deletions and add, losing history in the process.
Aside from that though, it's just a good idea in general to
make small changes.
So this change only changes the names of the Stream related
source files, and applies necessary source fix ups.
llvm-svn: 296211
Summary:
In Preparation for graph comparison, this patch breaks out the color
choice code from xray-graph into a library and adds polynomials for
the Sequential and Difference sets from ColorBrewer.
Depends on D29005
Reviewers: dblaikie, chandlerc, dberris
Reviewed By: dberris
Subscribers: chandlerc, llvm-commits, mgorny
Differential Revision: https://reviews.llvm.org/D29363
llvm-svn: 296210
Instead of stripping the longest common prefix off of the filenames in a
report, strip out the longest chain of redundant path components. This
fixes the case in PR31982, where there are two files with the same
prefix, and stripping out the LCP makes things less intelligible.
llvm-svn: 296029
For whatever reason ld64 requires that member headers (not the member
themselves) should be aligned. The only way to do that is to edit the
previous member so that it ends at an aligned boundary.
Since modifying data put in an archive is an undesirable property,
llvm-ar should only do it when it is absolutely necessary.
llvm-svn: 295765
The current ObjectLinkingLayer (now RTDyldObjectLinkingLayer) links objects
in-process using MCJIT's RuntimeDyld class. In the near future I hope to add new
object linking layers (e.g. a remote linking layer that links objects in the JIT
target process, rather than the client), so I'm renaming this class to be more
descriptive.
llvm-svn: 295636
Summary:
The file type packs function trace data onto disk from potentially multiple
threads that are aggregated and flushed during the course of an instrumented
program's runtime.
It is named FDR mode or Flight Data recorder as an analogy to plane
blackboxes, which instrument a running system without access to IO.
The writer code is defined in compiler-rt in xray_fdr_logging.h/cc
Reviewers: rSerge, kcc, dberris
Reviewed By: dberris
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D29697
llvm-svn: 295397
Some PDBs or object files can contain references to other PDBs
where the real type information lives. When this happens,
all type indices in the original PDB are meaningless because
their records are not there.
With this patch we add the ability to pull type info from those
secondary PDBs.
Differential Revision: https://reviews.llvm.org/D29973
llvm-svn: 295382
Summary:
Add a field to LTO::Config, CGFileType, to select the file type to emit (object
or assembly). This is useful for testing and to implement -save-temps.
Reviewers: tejohnson, mehdi_amini, pcc
Reviewed By: mehdi_amini
Subscribers: davide, llvm-commits
Differential Revision: https://reviews.llvm.org/D29475
llvm-svn: 295226
Summary:
The YAML output produced by llvm-xray is supposed to be wrapped at the
arbitrary default of 70 columns set by `yaml:Output`. Unfortunately,
the wrapping is rather unpredictable, and can easily go past the set
number of columns, depending on the execution environment.
To make the YAML output environment-independent, disable wrapping
instead.
Reviewers: dberris
Reviewed By: dberris
Subscribers: fhahn, llvm-commits
Differential Revision: https://reviews.llvm.org/D29962
llvm-svn: 295116
The summary information includes all uses of llvm.type.test and
llvm.type.checked.load intrinsics that can be used to devirtualize calls,
including any constant arguments for virtual constant propagation.
Differential Revision: https://reviews.llvm.org/D29734
llvm-svn: 294795
Summary:
In preparation for graph comparison and filtering, this is a library for
representing graphs in LLVM. This will enable easier encapsulation and reuse
of graphs in llvm-xray.
Depends on D28999, D28225
Reviewers: dblaikie, dberris
Reviewed By: dberris
Subscribers: mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D29005
llvm-svn: 294717
Summary:
In preparation for graph comparison and filtering, this is a library for
representing graphs in LLVM. This will enable easier encapsulation and reuse
of graphs in llvm-xray.
Depends on D28999, D28225
Reviewers: dblaikie, dberris
Reviewed By: dberris
Subscribers: mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D29005
llvm-svn: 294713
r288399 introduced the DIEUnit class, and in the process broke
the corner case where dsymutil generates an empty CU during an
LTO link. This restores the logic and adds a test for the corner
case.
llvm-svn: 294618
Disassembly currently begins from addresses obtained from the objects
symbol table. For ELF, add the dynamic symbols to the list if no
static symbols are available so that we can more successfully
disassemble stripped binaries.
Differential Revision: https://reviews.llvm.org/D29632
llvm-svn: 294430
which caused it to not disassemble the bytes a the start of the section if
the section had symbols and the first symbol was not at the start of the
section.
rdar://30143243
llvm-svn: 294212
Summary:
llc would hit a fatal error for errors in inline assembly. The
diagnostics message is now printed.
Reviewers: rengolin, MatzeB, javed.absar, anemet
Reviewed By: anemet
Subscribers: jyknight, nemanjai, llvm-commits
Differential Revision: https://reviews.llvm.org/D29408
llvm-svn: 293999
Summary:
This is necessary to get stats from the ThinLink printed before the
early exit when compiling in a distributed build.
Reviewers: mehdi_amini
Subscribers: Prazek, llvm-commits
Differential Revision: https://reviews.llvm.org/D29461
llvm-svn: 293908
Summary:
dsymutil upgrade path can change the size of segment and it needs to update
the vmsize of the segment to reflect the size change.
rdar://problem/30290714
Reviewers: friss
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D29433
llvm-svn: 293842
This introduces the `analyze` subcommand. For now there is only
one option, to analyze hash collisions in the type streams. In
the future, however, we could add many more things here, such
as performing size analyses, compacting, and statistics about
the type of records etc.
llvm-svn: 293795
Summary:
This change implements the instrumentation map loading library which can
understand both YAML-defined instrumentation maps, and ELF 64-bit object
files that have the XRay instrumentation map section. We break it out
into a library on its own to allow for other applications to deal with
the XRay instrumentation map defined in XRay-instrumented binaries.
This type provides both raw access to the logical representation of the
instrumentation map entries as well as higher level functions for
converting a function ID into a function address.
At this point we only support ELF64 binaries and YAML-defined XRay
instrumentation maps. Future changes should extend this to support
32-bit ELF binaries, as well as other binary formats (like MachO).
As part of this change we also migrate all uses of the extraction logic
that used to be defined in tools/llvm-xray/ to use this new type and
interface for loading from files. We also remove the flag from the
`llvm-xray` tool that required users to specify the type of the
instrumentation map file being provided to instead make the library
auto-detect the file type.
Reviewers: dblaikie
Subscribers: mgorny, varno, llvm-commits
Differential Revision: https://reviews.llvm.org/D29319
llvm-svn: 293721
without symbols that makes calls through a symbol stub which were not
correctly being annotated with “## symbol stub for: _foo”.
Just adds the same parameters for getting the annotations from
DisAsm->getInstruction() and passing them to IP->printInst() from the
code above when boolean variable symbolTableWorked was true.
rdar://29791952
llvm-svn: 293662
Create a WasmDumper subclass of ObjDumper to support Webassembly binary
files.
Patch by Sam Clegg
Differential Revision: https://reviews.llvm.org/D27355
llvm-svn: 293569
To better match the old darwin otool(1) behavior, when llvm-obdump(1) is used
with the -macho option and the input file is not an object file simply print
the file name and this message:
foo: is not an object file
and continue on to process other input files. Also in this case don’t exit
non-zero. This should help in some OSS projects' with autoconf scripts
that are expecting the old darwin otool(1) behavior.
rdar://26828015
llvm-svn: 293547
We had various variants of defining dump() functions in LLVM. Normalize
them (this should just consistently implement the things discussed in
http://lists.llvm.org/pipermail/cfe-dev/2014-January/034323.html
For reference:
- Public headers should just declare the dump() method but not use
LLVM_DUMP_METHOD or #if !defined(NDEBUG) || defined(LLVM_ENABLE_DUMP)
- The definition of a dump method should look like this:
#if !defined(NDEBUG) || defined(LLVM_ENABLE_DUMP)
LLVM_DUMP_METHOD void MyClass::dump() {
// print stuff to dbgs()...
}
#endif
llvm-svn: 293359
R_X86_64_NONE can be emitted without a symbol associated (well,
in theory it should never be emitted in an ABI-compliant relocatable
object). So, if there's no symbol associated to a reloc, emit one
with an empty name, instead of crashing.
Ack'ed by Michael Spencer offline.
PR: 31768
llvm-svn: 293224
This change introduces adjustPassManager target callback giving a
target an opportunity to tweak PassManagerBuilder before pass
managers are populated.
This generalizes and replaces addEarlyAsPossiblePasses target
callback. In particular that can be used to add custom passes to
extension points other than EP_EarlyAsPossible.
Differential Revision: https://reviews.llvm.org/D28336
llvm-svn: 293189
This allows MIR passes to emit optimization remarks with the same level
of functionality that is available to IR passes.
It also hooks up the greedy register allocator to report spills. This
allows for interesting use cases like increasing interleaving on a loop
until spilling of registers is observed.
I still need to experiment whether reporting every spill scales but this
demonstrates for now that the functionality works from llc
using -pass-remarks*=<pass>.
Differential Revision: https://reviews.llvm.org/D29004
llvm-svn: 293110
Serge Guelton