See https://reviews.llvm.org/D6678 for the history of
isExtractSubvectorCheap. Essentially the same considerations apply
to ARM.
This temporarily breaks the formation of vpadd/vpaddl in certain cases;
AddCombineToVPADDL essentially assumes that we won't form VUZP shuffles.
See https://reviews.llvm.org/D27779 for followup fix.
Differential Revision: https://reviews.llvm.org/D27774
llvm-svn: 290198
This allows lowering i8 and i16 arguments if they can fit in the registers. Note
that the lowering is incomplete - ABI extensions are handled in a subsequent
patch.
(Last part of)
Differential Revision: https://reviews.llvm.org/D27704
llvm-svn: 290106
Teach the instruction selector and legalizer that it's ok to have adds with 8 or
16-bit integers.
This is the second part of https://reviews.llvm.org/D27704
llvm-svn: 290105
Teach the instruction selector that it's ok to copy small values from physical
registers.
First part of https://reviews.llvm.org/D27704
llvm-svn: 290104
This adds support for lowering more than 4 arguments (although still i32 only).
It uses the handleAssignments / ValueHandler infrastructure extracted from
the AArch64 backend in r288658.
Differential Revision: https://reviews.llvm.org/D27195
llvm-svn: 290098
Add support for selecting simple G_LOAD and G_FRAME_INDEX instructions (32-bit
scalars only). This will be useful for functions that need to pass arguments on
the stack.
First part of https://reviews.llvm.org/D27195.
llvm-svn: 290096
Currently, there are substantial problems forming vld1_dup even if the
VDUP survives legalization. The lack of an actual node
leads to terrible results: not only can we not form post-increment vld1_dup
instructions, but we form scalar pre-increment and post-increment
loads which force the loaded value into a GPR. This patch fixes that
by combining the vdup+load into an ARMISD node before DAGCombine
messes it up.
Also includes a crash fix for vld2_dup (see testcase @vld2dupi8_postinc_variable).
Recommiting with fix to avoid forming vld1dup if the type of the load
doesn't match the type of the vdup (see
https://llvm.org/bugs/show_bug.cgi?id=31404).
Differential Revision: https://reviews.llvm.org/D27694
llvm-svn: 289972
Add the minimal support necessary to select a function that returns the sum of
two i32 values.
This includes some support for argument/return lowering of i32 values through
registers, as well as the handling of copy and add instructions throughout the
GlobalISel pipeline.
Differential Revision: https://reviews.llvm.org/D26677
llvm-svn: 289940
Add two public methods to ARMTargetLowering: CCAssignFnForCall and
CCAssignFnForReturn, which are just calling the already existing private method
CCAssignFnForNode. These will come in handy for GlobalISel on ARM.
We also replace all calls to CCAssignFnForNode in ARMISelLowering.cpp, because
the new methods are friendlier to the reader.
llvm-svn: 289932
MachineLegalizer used to be the name of both the class and the member,
causing GCC errors. r276522 fixed that by renaming the member to just
'Legalizer'. The 'class' workaround isn't necessary anymore; drop it.
llvm-svn: 289848
This is essentially a recommit of r285893, but with a correctness fix. The
problem of the original commit was that this:
bic r5, r7, #31
cbz r5, .LBB2_10
got rewritten into:
lsrs r5, r7, #5
beq .LBB2_10
The result in destination register r5 is not the same and this is incorrect
when r5 is not dead. So this fix includes checking the uses of the AND
destination register. And also, compared to the original commit, some regression
tests didn't need changing anymore because of this extra check.
For completeness, this was the original commit message:
For the common pattern (CMPZ (AND x, #bitmask), #0), we can do some more
efficient instruction selection if the bitmask is one consecutive sequence of
set bits (32 - clz(bm) - ctz(bm) == popcount(bm)).
1) If the bitmask touches the LSB, then we can remove all the upper bits and
set the flags by doing one LSLS.
2) If the bitmask touches the MSB, then we can remove all the lower bits and
set the flags with one LSRS.
3) If the bitmask has popcount == 1 (only one set bit), we can shift that bit
into the sign bit with one LSLS and change the condition query from NE/EQ to
MI/PL (we could also implement this by shifting into the carry bit and
branching on BCC/BCS).
4) Otherwise, we can emit a sequence of LSLS+LSRS to remove the upper and lower
zero bits of the mask.
1-3 require only one 16-bit instruction and can elide the CMP. 4 requires two
16-bit instructions but can elide the CMP and doesn't require materializing a
complex immediate, so is also a win.
Differential Revision: https://reviews.llvm.org/D27761
llvm-svn: 289794
This implements execute-only support for ARM code generation, which
prevents the compiler from generating data accesses to code sections.
The following changes are involved:
* Add the CodeGen option "-arm-execute-only" to the ARM code generator.
* Add the clang flag "-mexecute-only" as well as the GCC-compatible
alias "-mpure-code" to enable this option.
* When enabled, literal pools are replaced with MOVW/MOVT instructions,
with VMOV used in addition for floating-point literals. As the MOVT
instruction is required, execute-only support is only available in
Thumb mode for targets supporting ARMv8-M baseline or Thumb2.
* Jump tables are placed in data sections when in execute-only mode.
* The execute-only text section is assigned section ID 0, and is
marked as unreadable with the SHF_ARM_PURECODE flag with symbol 'y'.
This also overrides selection of ELF sections for globals.
llvm-svn: 289784
Given that INSERT_VECTOR_ELT operates on D registers anyway, combining
64-bit vectors into a 128-bit vector is basically free. Therefore, try
to split BUILD_VECTOR nodes before giving up and lowering them to a series
of INSERT_VECTOR_ELT instructions. Sometimes this allows dramatically
better lowerings; see testcases for examples. Inspired by similar code
in the x86 backend for AVX.
Differential Revision: https://reviews.llvm.org/D27624
llvm-svn: 289706
Currently, there are substantial problems forming vld1_dup even if the
VDUP survives legalization. The lack of an actual node
leads to terrible results: not only can we not form post-increment vld1_dup
instructions, but we form scalar pre-increment and post-increment
loads which force the loaded value into a GPR. This patch fixes that
by combining the vdup+load into an ARMISD node before DAGCombine
messes it up.
Also includes a crash fix for vld2_dup (see testcase @vld2dupi8_postinc_variable).
Differential Revision: https://reviews.llvm.org/D27694
llvm-svn: 289703
At least the plugin used by the LibreOffice build
(<https://wiki.documentfoundation.org/Development/Clang_plugins>) indirectly
uses those members (through inline functions in LLVM/Clang include files in turn
using them), but they are not exported by utils/extract_symbols.py on Windows,
and accessing data across DLL/EXE boundaries on Windows is generally
problematic.
Differential Revision: https://reviews.llvm.org/D26671
llvm-svn: 289647
Summary:
This patch aims to generalize matching of the strided store accesses to more general masks.
The more general rule is to have consecutive accesses based on the stride:
[x, y, ... z, x+1, y+1, ...z+1, x+2, y+2, ...z+2, ...]
All elements in the masks need not form a contiguous space, there may be gaps.
As before, undefs are allowed and filled in with adjacent element loads.
Reviewers: HaoLiu, mssimpso
Subscribers: mkuper, delena, llvm-commits
Differential Revision: https://reviews.llvm.org/D23646
llvm-svn: 289573
When we see a non flag-setting instruction for which only the flag-setting
version is available in Thumb1, we should give a better error message than
"invalid instruction".
Differential Revision: https://reviews.llvm.org/D27414
llvm-svn: 288805
Instead, expose whether the current type is an array or a struct, if an array
what the upper bound is, and if a struct the struct type itself. This is
in preparation for a later change which will make PointerType derive from
Type rather than SequentialType.
Differential Revision: https://reviews.llvm.org/D26594
llvm-svn: 288458
Summary:
This patch fixes comparison of 64-bit atomic with its expected value in CMP_SWAP_64 expansion.
Currently, the low words are compared with CMP, while the high words are compared with SBC. SBC expects the carry flag to be set if CMP detects a difference. CMP might leave the carry unset for unequal arguments though if the first one is >= than the second. This might cause the comparison logic to detect false equality.
Example of the broken C++ code:
```
std::atomic<long long> at(2);
long long ll = 1;
std::atomic_compare_exchange_strong(&at, &ll, 3);
```
Even though the atomic `at` and the expected value `ll` are not equal and `atomic_compare_exchange_strong` returns `false`, `at` is changed to 3.
The patch replaces SBC with CMPEQ.
Reviewers: t.p.northover
Subscribers: aemerson, rengolin, llvm-commits, asl
Differential Revision: https://reviews.llvm.org/D27315
llvm-svn: 288433
Recommitting r288293 with some extra fixes for GlobalISel code.
Most of the exception handling members in MachineModuleInfo is actually
per function data (talks about the "current function") so it is better
to keep it at the function instead of the module.
This is a necessary step to have machine module passes work properly.
Also:
- Rename TidyLandingPads() to tidyLandingPads()
- Use doxygen member groups instead of "//===- EH ---"... so it is clear
where a group ends.
- I had to add an ugly const_cast at two places in the AsmPrinter
because the available MachineFunction pointers are const, but the code
wants to call tidyLandingPads() in between
(markFunctionEnd()/endFunction()).
Differential Revision: https://reviews.llvm.org/D27227
llvm-svn: 288405
Most of the exception handling members in MachineModuleInfo is actually
per function data (talks about the "current function") so it is better
to keep it at the function instead of the module.
This is a necessary step to have machine module passes work properly.
Also:
- Rename TidyLandingPads() to tidyLandingPads()
- Use doxygen member groups instead of "//===- EH ---"... so it is clear
where a group ends.
- I had to add an ugly const_cast at two places in the AsmPrinter
because the available MachineFunction pointers are const, but the code
wants to call tidyLandingPads() in between
(markFunctionEnd()/endFunction()).
Differential Revision: https://reviews.llvm.org/D27227
llvm-svn: 288293
This is per function data so it is better kept at the function instead
of the module.
This is a necessary step to have machine module passes work properly.
Differential Revision: https://reviews.llvm.org/D27185
llvm-svn: 288291
No test case necessary as the problematic condition is checked with the
newly introduced assertAllSuperRegsMarked() function.
Differential Revision: https://reviews.llvm.org/D26648
llvm-svn: 288277
No-one actually had a mangler handy when calling this function, and
getSymbol itself went most of the way towards getting its own mangler
(with a local TLOF variable) so forcing all callers to supply one was
just extra complication.
llvm-svn: 287645
Summary:
Variadic functions can be treated in the same way as normal functions
with respect to the number and types of parameters.
Reviewers: grosbach, olista01, t.p.northover, rengolin
Subscribers: javed.absar, aemerson, llvm-commits
Differential Revision: https://reviews.llvm.org/D26748
llvm-svn: 287219
One half of the shifts obviously needed conditional selection based on whether
the shift amount is more than 32-bits, but leaving the other half as the
natural shift isn't acceptable either: it's undefined behaviour to shift a
32-bit value by more than 31.
llvm-svn: 287149
Move some code inside the proper 'if' block to make sure it is only run once,
when the subtarget is first created. Things can still break if we use different
ARM target machines or if we have functions with different 'target-cpu' or
'target-features', we should fix that too in the future.
llvm-svn: 286974
This patch adds the Sched Machine Model for Cortex-R52.
Details of the pipeline and descriptions are in comments
in file ARMScheduleR52.td included in this patch.
Reviewers: rengolin, jmolloy
Differential Revision: https://reviews.llvm.org/D26500
llvm-svn: 286949
For example we were producing
push {r8, r10, r11, r4, r5, r7, lr}
This is misleading (r4, r5 and r7 are actually pushed before the rest), and
other components (stack folding recently) often forget to deal with the extra
complexity coming from the different order, leading to miscompiles. Finally, we
warn about our own code in -no-integrated-as mode without this, which is really
not a good idea.
Fixed usage of std::sort so that we (hopefully) use instantiations that
actually exist in GCC 4.8.
llvm-svn: 286881
For example we were producing
push {r8, r10, r11, r4, r5, r7, lr}
This is misleading (r4, r5 and r7 are actually pushed before the rest), and
other components (stack folding recently) often forget to deal with the extra
complexity coming from the different order, leading to miscompiles. Finally, we
warn about our own code in -no-integrated-as mode without this, which is really
not a good idea.
llvm-svn: 286866
The version of this instruction with the .w suffix already correctly accepts
this, but the alias without the .w did not.
Differential Revision: https://reviews.llvm.org/D26499
llvm-svn: 286446
When the base register (register pointing to the jump table) is the PC, we expect the jump table to directly follow the jump sequence with no intervening padding.
If there is intervening padding, the calculated offsets will not be correct. One solution would be to account for any padding in the emitted LDRB instruction, but at the moment we don't support emitting MCExprs for the load offset.
In the meantime, it's correct and only a slight amount worse to just move the padding up, from just before the jump table to just before the jump instruction sequence. We can do that by emitting code alignment before the jump sequence, as we know the number of instructions in the sequence is always 4.
llvm-svn: 286107
This handles the last case of the builtin function calls that we would
generate code which differed from Microsoft's ABI. Rather than
generating a call to `__pow{d,s}i2` we now promote the parameter to a
float or double and invoke `powf` or `pow` instead.
Addresses PR30825!
llvm-svn: 286082
Summary: ARMv6m supports dmb etc fench instructions but not ldrex/strex etc. So for some atomic load/store, LLVM should inline instructions instead of lowering to __sync_ calls.
Reviewers: rengolin, efriedma, t.p.northover, jmolloy
Subscribers: efriedma, aemerson, llvm-commits
Differential Revision: https://reviews.llvm.org/D26120
llvm-svn: 285969
Eli Friedman