PR52408 reported an sh_info=0 instance. I have seen sh_info=0
independently before.
sh_info>=num_sections is probably very rare. Just use one diagnostic for
the two types of errors.
Delete invalid-relocations.test which is covered by invalid/bad-reloc-target.test
Differential Revision: https://reviews.llvm.org/D113466
This diff makes several amendments to the local file caching mechanism
which was migrated from ThinLTO to Support in
rGe678c51177102845c93529d457b020f969125373 in response to follow-up
discussion on that commit.
Patch By: noajshu
Differential Revision: https://reviews.llvm.org/D113080
This reverts commit 5cbec88cbf.
Vitaly said that 2faac77f26 actually works.
Sanitizer's armv7-linux-androideabi24 configuration has other issues which haven't been identified yet, but that's unrelated to the empty symbol name issue.
The "symbol 'foo' has no type" diagnostic tries to inform that copy
relocation/canonical PLT entry cannot be used, but the diagnostic is often
incorrect and confusing.
The hint does not pull its weight:
* adding -Wl,-z,notext often won't work (relocation types other than `symbolRel`, e.g. `R_AARCH64_LDST32_ABS_LO12_NC`)
* for pure (no assembly) C/C++ projects, the "-fPIC" hint is sufficient
Many diagnostics use `getErrorPlace` or `getErrorLocation` to report a location.
In the presence of line table debug information, `getErrorPlace` uses a source
file location and ignores the object file location. However, the object file
location is sometimes more useful.
This patch changes "undefined symbol" and "out of range" diagnostics to report
both object/source file locations. Other diagnostics can use similar format if
needed.
The key idea is to let `InputSectionBase::getLocation` report the object file
location and use `getSrcMsg` for source file/line information. `getSrcMsg`
doesn't leverage `STT_FILE` information yet, but I think the temporary lack of
the functionality is ok.
For the ARM "branch and link relocation" diagnostic, I arbitrarily place the
source file location at the end of the line. The diagnostic is not very common
so its formatting doesn't need to be pretty.
Differential Revision: https://reviews.llvm.org/D112518
For `InputSection` `.foo`, its `InputBaseSection::{areRelocsRela,firstRelocation,numRelocation}` basically
encode the information of `.rel[a].foo`. However, one uint32_t (the relocation section index)
suffices. See the implementation of `relsOrRelas`.
This change decreases sizeof(InputSection) from 184 to 176 on 64-bit Linux.
The maximum resident set size linking a large application (1.2G output) decreases by 0.39%.
Differential Revision: https://reviews.llvm.org/D112513
The hack is irrelevant for two reasons:
* binutils 2.24 is quite old and cannot handle R_X86_64_REX_GOTPCRELX from 2016 onwards anyway
* `canMergeToProgbits` allows combining SHT_INIT_ARRAY/SHT_FINI_ARRAY into SHT_PROGBITS
For a function call (using the default `-fplt`), GCC `-mcmodel=large` generates an assembly modifier which
leads to an R_X86_64_PLTOFF64 relocation. In real world,
http://git.ageinghacker.net/jitter (used by GNU poke) uses `-mcmodel=large`.
R_X86_64_PLTOFF64's formula is (if preemptible) `L - GOT + A` or (if non-preemptible) `S - GOT + A`
where `GOT` is (confusingly) the address of `.got.plt`
Reviewed By: peter.smith
Differential Revision: https://reviews.llvm.org/D112386
Taken from Chih-Mao Chen's D100835.
RelExpr has 64 bits now and needs the extension to support new members
(`R_PLT_GOTPLT` for `R_X86_64_PLTOFF64` support).
Note: RelExpr needs to have at least a member >=64 to prevent
-Wtautological-constant-out-of-range-compare for `if (expr >= 64)`.
Reviewed By: arichardson, peter.smith
Differential Revision: https://reviews.llvm.org/D112385
GNU ld doesn't support `--no-pic-executable`.
`-p` has been removed from likely the only use case (Linux kernel) for over 2.5 years: https://git.kernel.org/linus/091bb549f7722723b284f63ac665e2aedcf9dec9
`--no-add-needed` was the pre-binutils-2.23 spelling for `--no-copy-dt-needed-entries`.
The legacy alias is irrelevant in 2021.
If segments are defined in a linker script, placing an orphan section
before the found closest-rank section can result in adding it in a
previous segment and changing flags of that segment. This happens if
the orphan section has a lower sort rank than the found section. To
avoid that, the patch forces orphan sections to be moved after the
found section if segments are explicitly defined.
Differential Revision: https://reviews.llvm.org/D111717
We would like to move ThinLTO’s battle-tested file caching mechanism to
the LLVM Support library so that we can use it elsewhere in LLVM.
Patch By: noajshu
Differential Revision: https://reviews.llvm.org/D111371
We would like to move ThinLTO’s battle-tested file caching mechanism to
the LLVM Support library so that we can use it elsewhere in LLVM.
Patch By: noajshu
Differential Revision: https://reviews.llvm.org/D111371
I think D79300 has fixed the D51892 (`__i686.get_pc_thunk.bx`) issue, so
we can bring back rL330869.
D79300 says `would error undefined symbol instead of the more relevant discarded section`
but it doesn't reproduce now.
This avoids a quirk in `isUndefWeak()`.
Reviewed By: peter.smith
Differential Revision: https://reviews.llvm.org/D111365
Most architectures use .got instead of .got.plt, so switching the default can
minimize customization.
This fixes an issue for SPARC V9 which uses .got .
AVR, AMDGPU, and MSP430 don't seem to use _GLOBAL_OFFSET_TABLE_.
(As I mentioned in https://reviews.llvm.org/D62609#1534158 ,
the condition for using bti c for executable can be loosened.)
In two cases the address of a PLT may escape:
* canonical PLT entry for a STT_FUNC
* non-preemptible STT_GNU_IFUNC which is converted to STT_FUNC
The first case can be detected with `needsPltAddr`.
The second case is not straightforward to detect because for the Relocations.cpp
created `directSym`, it's difficult to know whether the associated `sym` has
exercised the `!needsPlt(expr)` code path. Just use the conservative `isInIplt`
condition. A non-preemptible ifunc not referenced by non-GOT-generating
non-PLT-generating relocations will have an unneeded `bti c`, but the cost is acceptable.
The second case fixes a bug as well: a -shared link may have non-preemptible ifunc.
Before the patch we did not emit `bti c` and could be wrong if the PLT address escaped.
GNU ld doesn't handle the case: `relocation R_AARCH64_ADR_PREL_PG_HI21 against STT_GNU_IFUNC symbol 'ifunc2' isn't handled by elf64_aarch64_final_link_relocate` (https://sourceware.org/bugzilla/show_bug.cgi?id=28370)
For -shared, if BTI is enabled but PAC is disabled, the PLT entry size increases
from 16 to 24 because we have to select the PLT scheme early, but the cost is
acceptable.
Reviewed By: peter.smith
Differential Revision: https://reviews.llvm.org/D110217
Currenlty PseudoProbeInserter is a pass conditioned on a target switch. It works well with a single clang invocation. It doesn't work so well when the backend is called separately (i.e, through the linker or llc), where user has always to pass -pseudo-probe-for-profiling explictly. I'm making the pass a default pass that requires no command line arg to trigger, but will be actually run depending on whether the CU comes with `llvm.pseudo_probe_desc` metadata.
Reviewed By: wenlei
Differential Revision: https://reviews.llvm.org/D110209
Similar to D69607 but for archive member extraction unrelated to GC. This patch adds --why-extract=.
Prior art:
GNU ld -M prints
```
Archive member included to satisfy reference by file (symbol)
a.a(a.o) main.o (a)
b.a(b.o) (b())
```
-M is mainly for input section/symbol assignment <-> output section mapping
(often huge output) and the information may appear ad-hoc.
Apple ld64
```
__Z1bv forced load of b.a(b.o)
_a forced load of a.a(a.o)
```
It doesn't say the reference file.
Arm's proprietary linker
```
Selecting member vsnprintf.o(c_wfu.l) to define vsnprintf.
...
Loading member vsnprintf.o from c_wfu.l.
definition: vsnprintf
reference : _printf_a
```
---
--why-extract= gives the user the full data (which is much shorter than GNU ld
-Map). It is easy to track a chain of references to one archive member with a
one-liner, e.g.
```
% ld.lld main.o a_b.a b_c.a c.a -o /dev/null --why-extract=- | tee stdout
reference extracted symbol
main.o a_b.a(a_b.o) a
a_b.a(a_b.o) b_c.a(b_c.o) b()
b_c.a(b_c.o) c.a(c.o) c()
% ruby -ane 'BEGIN{p={}}; p[$F[1]]=[$F[0],$F[2]] if $.>1; END{x="c.a(c.o)"; while y=p[x]; puts "#{y[0]} extracts #{x} to resolve #{y[1]}"; x=y[0] end}' stdout
b_c.a(b_c.o) extracts c.a(c.o) to resolve c()
a_b.a(a_b.o) extracts b_c.a(b_c.o) to resolve b()
main.o extracts a_b.a(a_b.o) to resolve a
```
Archive member extraction happens before --gc-sections, so this may not be a live path
under --gc-sections, but I think it is a good approximation in practice.
* Specifying a file avoids output interleaving with --verbose.
* Required `=` prevents accidental overwrite of an input if the user forgets `=`. (Most of compiler drivers' long options accept `=` but not ` `)
Differential Revision: https://reviews.llvm.org/D109572
Fangrui Song