Since TBEHandler doesn't maintain state or otherwise have any need to be
a class right now, the read and write functions have been moved out and
turned into standalone functions. Additionally, the TBE read function
has been updated to return an Expected value for better error handling.
Tests have been updated to reflect these changes.
Differential Revision: https://reviews.llvm.org/D55450
llvm-svn: 348735
When CodeExtractor outlines values which are used by the original
function, it must store those values in some in-out parameter. This
store instruction must not be inserted in between a PHI and an EH pad
instruction, as that results in invalid IR.
This fixes the following verifier failure seen while outlining within
ObjC methods with live exit values:
The unwind destination does not have an exception handling instruction!
%call35 = invoke i8* bitcast (i8* (i8*, i8*, ...)* @objc_msgSend to i8* (i8*, i8*)*)(i8* %exn.adjusted, i8* %1)
to label %invoke.cont34 unwind label %lpad33, !dbg !4183
The unwind destination does not have an exception handling instruction!
invoke void @objc_exception_throw(i8* %call35) #12
to label %invoke.cont36 unwind label %lpad33, !dbg !4184
LandingPadInst not the first non-PHI instruction in the block.
%3 = landingpad { i8*, i32 }
catch i8* null, !dbg !1411
rdar://46540815
llvm-svn: 348562
https://reviews.llvm.org/D54980
This provides a standard API across GISel passes to observe and notify
passes about changes (insertions/deletions/mutations) to MachineInstrs.
This patch also removes the recordInsertion method in MachineIRBuilder
and instead provides method to setObserver.
Reviewed by: vkeles.
llvm-svn: 348406
Like the already existing zip_shortest/zip_first iterators, zip_longest
iterates over multiple iterators at once, but has as many iterations as
the longest sequence.
This means some iterators may reach the end before others do.
zip_longest uses llvm::Optional's None value to mark a
past-the-end value.
zip_longest is not reverse-iteratable because the tuples iterated over
would be different for different length sequences (IMHO for the same
reason neither zip_shortest nor zip_first should be reverse-iteratable;
one can still reverse the ranges individually if that's the expected
behavior).
In contrast to zip_shortest/zip_first, zip_longest tuples contain
rvalues instead of references. This is because llvm::Optional cannot
contain reference types and the value-initialized default does not have
a memory location a reference could point to.
The motivation for these iterators is to use C++ foreach to compare two
lists of ordered attributes in D48100 (SemaOverload.cpp and
ASTReaderDecl.cpp).
Idea by @hfinkel.
This re-commits r348301 which was reverted by r348303.
The compilation error by gcc 5.4 was resolved using make_tuple in the in
the initializer_list.
The compileration error by msvc14 was resolved by splitting
ZipLongestValueType (which already was a workaround for msvc15) into
ZipLongestItemType and ZipLongestTupleType.
Differential Revision: https://reviews.llvm.org/D48348
llvm-svn: 348323
Like the already existing zip_shortest/zip_first iterators, zip_longest
iterates over multiple iterators at once, but has as many iterations as
the longest sequence.
This means some iterators may reach the end before others do.
zip_longest uses llvm::Optional's None value to mark a
past-the-end value.
zip_longest is not reverse-iteratable because the tuples iterated over
would be different for different length sequences (IMHO for the same
reason neither zip_shortest nor zip_first should be reverse-iteratable;
one can still reverse the ranges individually if that's the expected
behavior).
In contrast to zip_shortest/zip_first, zip_longest tuples contain
rvalues instead of references. This is because llvm::Optional cannot
contain reference types and the value-initialized default does not have
a memory location a reference could point to.
The motivation for these iterators is to use C++ foreach to compare two
lists of ordered attributes in D48100 (SemaOverload.cpp and
ASTReaderDecl.cpp).
Idea by @hfinkel.
Differential Revision: https://reviews.llvm.org/D48348
llvm-svn: 348301
If a PHI node out of extracted region has multiple incoming values from it,
split this PHI on two parts. First PHI has incomings only from region and
extracts with it (they are placed to the separate basic block that added to the
list of outlined), and incoming values in original PHI are replaced by first
PHI. Similar solution is already used in CodeExtractor for PHIs in entry block
(severSplitPHINodes method). It covers PR39433 bug.
Patch by Sergei Kachkov!
Differential Revision: https://reviews.llvm.org/D55018
llvm-svn: 348205
http://lists.llvm.org/pipermail/llvm-dev/2018-September/126472.html
TextAPI is a library and accompanying tool that allows conversion between binary shared object stubs and textual counterparts. The motivations and uses cases for this are explained thoroughly in the llvm-dev proposal [1]. This initial commit proposes a potential structure for the TAPI library, also including support for reading/writing text-based ELF stubs (.tbe) in addition to preliminary support for reading binary ELF files. The goal for this patch is to ensure the project architecture appropriately welcomes integration of Mach-O stubbing from Apple's TAPI [2].
Added:
- TextAPI library
- .tbe read support
- .tbe write (to raw_ostream) support
[1] http://lists.llvm.org/pipermail/llvm-dev/2018-September/126472.html
[2] https://github.com/ributzka/tapi
Differential Revision: https://reviews.llvm.org/D53051
llvm-svn: 348170
Summary:
SSBS (Speculative Store Bypass Safe) is only mandatory from 8.5
onwards but is optional from Armv8.0-A. This patch adds a command
line option to enable SSBS, as it was previously only possible to
enable by selecting -march=armv8.5-a.
Similar patch upstream in GNU binutils:
https://sourceware.org/ml/binutils/2018-09/msg00274.html
Reviewers: olista01, samparker, aemerson
Reviewed By: samparker
Subscribers: javed.absar, kristof.beyls, kristina, llvm-commits
Differential Revision: https://reviews.llvm.org/D54629
llvm-svn: 348137
If the shift amount is known, we can determine the known bits of the
output based on the known bits of two inputs.
This is essentially the same functionality as implemented in D54869,
but for ValueTracking rather than InstCombine SimplifyDemandedBits.
Differential Revision: https://reviews.llvm.org/D55140
llvm-svn: 348091
Generalize the existing MatchSelectPatternTest class to also work
with other types of tests. This reduces the amount of boilerplate
necessary to write ValueTracking tests in general, and computeKnownBits
tests in particular.
The inherited convention is that the function must be @test and the
tested instruction %A.
Differential Revision: https://reviews.llvm.org/D55141
llvm-svn: 348043
Moving to PlatformType from BinaryFormat had some UB fallout when handing
unknown platforms or malformed input files.
This should fix the sanitizer bots.
llvm-svn: 347836
Add the required target triples to LLVMSupport to support Hurd
in LLVM (formally `pc-hurd-gnu`).
Patch by sthibaul (Samuel Thibault)
Differential Revision: https://reviews.llvm.org/D54378
llvm-svn: 347832
Add basic infrastructure for reading and writting TBD files (version 1 - 3).
The TextAPI library is not used by anything yet (besides the unit tests). Tool
support will be added in a separate commit.
The TBD format is currently documented in the implementation file (TextStub.cpp).
https://reviews.llvm.org/D53945
Update: This contains changes to fix issues discovered by the bots:
- add parentheses to silence warnings.
- rename variables
- use PlatformType from BinaryFormat
llvm-svn: 347823
Add basic infrastructure for reading and writting TBD files (version 1 - 3).
The TextAPI library is not used by anything yet (besides the unit tests). Tool
support will be added in a separate commit.
The TBD format is currently documented in the implementation file (TextStub.cpp).
https://reviews.llvm.org/D53945
llvm-svn: 347808
extract_symbols.py (introduced in D18826) expects all of its library arguments
to be in the same directory - typically <config>/lib. DynamicLibraryLib.lib is
instead to be found in lib/<config>.
This patch intended to make DynamicLibraryLib.lib be created in <config>/lib
alongside most of the other libraries.
I previously tried passing absolute paths to extract_symbols.py but this
generated command lines that were too long for Visual Studio 2015: D54587
Differential Revision: https://reviews.llvm.org/D54701
llvm-svn: 347764
separate files to enable future changes.
This moves ARM and AArch64 target parsing into their
own files. They are still accessible through
TargetParser.h as before.
Several functions in AArch64 which were just forwarders to ARM
have been removed. All except AArch64::getFPUName were unused,
and that was only used in a test. Which itself was overlapping
one in ARM, so it has also been removed.
Differential revision: https://reviews.llvm.org/D53980
llvm-svn: 347741
Summary:
This (very specialized) function was added to enable an LLDB use case.
Now that a more generic interface (overriding of parser functions -
D52992) is available, and LLDB has been converted to use that (D54074),
the function is unused and can be removed.
Reviewers: erik.pilkington, sgraenitz, rsmith
Subscribers: mgorny, hiraditya, christof, libcxx-commits, llvm-commits
Differential Revision: https://reviews.llvm.org/D54893
llvm-svn: 347670
We can now select CLZ via the TableGen'erated code, so support G_CTLZ
and G_CTLZ_ZERO_UNDEF throughout the pipeline for types <= s32.
Legalizer:
If the CLZ instruction is available, use it for both G_CTLZ and
G_CTLZ_ZERO_UNDEF. Otherwise, use a libcall for G_CTLZ_ZERO_UNDEF and
lower G_CTLZ in terms of it.
In order to achieve this we need to add support to the LegalizerHelper
for the legalization of G_CTLZ_ZERO_UNDEF for s32 as a libcall (__clzsi2).
We also need to allow lowering of G_CTLZ in terms of G_CTLZ_ZERO_UNDEF
if that is supported as a libcall, as opposed to just if it is Legal or
Custom. Due to a minor refactoring of the helper function in charge of
this, we will also allow the same behaviour for G_CTTZ and G_CTPOP.
This is not going to be a problem in practice since we don't yet have
support for treating G_CTTZ and G_CTPOP as libcalls (not even in
DAGISel).
Reg bank select:
Map G_CTLZ to GPR. G_CTLZ_ZERO_UNDEF should not make it to this point.
Instruction select:
Nothing to do.
llvm-svn: 347545
The `expandTildeExpr` routine just replaces a tilde by a home dir path.
If the home dir has a trailing slash, the result of substitution will
contain double slashes. For example, `HOME=/foo/ ~/bar` gives `/foo//bar`.
That corresponds to (at least) Bash behaviour because the following
command `$HOME=/foo/ echo ~/bar` prints `/foo//bar`.
The `ExpandTilde` test constructs a path expected as the `fs::expand_tilde`
call result by calling `path::append` and the expected path has a single
slash. This patch fixes that and allows to pass the unittest on hosts where
the `HOME` is `/`.
Differential Revision: http://reviews.llvm.org/D54752
llvm-svn: 347346
Skip all MappedMemoryTest variants that rely on memory pages being
mapped for MF_WRITE|MF_EXEC when MPROTECT is enabled on NetBSD. W^X
protection causes all those mmap() calls to fail, causing the tests
to fail.
Differential Revision: https://reviews.llvm.org/D54080
llvm-svn: 347337
This adds the sadd_sat, uadd_sat, ssub_sat, usub_sat methods for performing saturating additions and subtractions to APInt.
Split out from D54237.
Patch by: nikic (Nikita Popov)
Differential Revision: https://reviews.llvm.org/D54332
llvm-svn: 347324
This patch fixes the issue noticed in D54532.
The problem is that cst_pred_ty-based matchers like m_Zero() currently do not match
scalar undefs (as expected), but *do* match vector undefs. This may lead to optimization
inconsistencies in rare cases.
There is only one existing test for which output changes, reverting the change from D53205.
The reason here is that vector fsub undef, %x is no longer matched as an m_FNeg(). While I
think that the new output is technically worse than the previous one, it is consistent with
scalar, and I don't think it's really important either way (generally that undef should have
been folded away prior to reassociation.)
I've also added another test case for this issue based on InstructionSimplify. It took some
effort to find that one, as in most cases undef folds are either checked first -- and in the
cases where they aren't it usually happens to not make a difference in the end. This is the
only case I was able to come up with. Prior to this patch the test case simplified to undef
in the scalar case, but zeroinitializer in the vector case.
Patch by: @nikic (Nikita Popov)
Differential Revision: https://reviews.llvm.org/D54631
llvm-svn: 347318
Apply review comments of https://reviews.llvm.org/D54185 to other target as well, specifically:
1. make anonymous namespaces as small as possible, avoid using static inside anonymous namespaces
2. Add missing header to some files
3. GetLoadImmediateOpcodem-> getLoadImmediateOpcode
4. Fix typo
Differential Revision: https://reviews.llvm.org/D54343
llvm-svn: 347309
This will hold flags specific to subprograms. In the future
we could potentially free up scarce bits in DIFlags by moving
subprogram-specific flags from there to the new flags word.
This patch does not change IR/bitcode formats, that will be
done in a follow-up.
Differential Revision: https://reviews.llvm.org/D54597
llvm-svn: 347239
Every Analysis pass has a get method that returns a reference of the Result of
the Analysis, for example, BlockFrequencyInfo
&BlockFrequencyInfoWrapperPass::getBFI(). I believe that
ProfileSummaryInfo::getPSI() is the only exception to that, as it was returning
a pointer.
Another change is renaming isHotBB and isColdBB to isHotBlock and isColdBlock,
respectively. Most methods use BB as the argument of variable names while
methods usually refer to Basic Blocks as Blocks, instead of BB. For example,
Function::getEntryBlock, Loop:getExitBlock, etc.
I also fixed one of the comments.
Patch by Rodrigo Caetano Rocha!
Differential Revision: https://reviews.llvm.org/D54669
llvm-svn: 347182
It fixes the case when Objective-C framework is added as a subframework
through a symlink. When parent framework infers a module map and fails
to detect a symlink, it would add a subframework as a submodule. And
when we parse module map for the subframework, we would encounter an
error like
> error: umbrella for module 'WithSubframework.Foo' already covers this directory
By implementing `getRealPath` "an egregious but useful hack" in
`ModuleMap::inferFrameworkModule` works as expected.
rdar://problem/45821279
Reviewers: bruno, benlangmuir, erik.pilkington
Reviewed By: bruno
Subscribers: hiraditya, dexonsmith, JDevlieghere, cfe-commits, llvm-commits
Differential Revision: https://reviews.llvm.org/D54245
llvm-svn: 347009
Add data structure to represent MessagePack "documents" and convert
to/from both MessagePack and YAML encodings.
Differential Revision: https://reviews.llvm.org/D48175
llvm-svn: 346978
Add support for "polymorphic" types to YAMLIO.
PolymorphicTraits can dynamically switch between other traits (Scalar, Map, or
Sequence). When inputting, the PolymorphicTraits type is told which type to
become, and when outputting the PolymorphicTraits type is asked which type it
currently is.
Also add support for TaggedScalarTraits to allow dynamically differentiating
between multiple scalar types using YAML tags.
Serialize empty maps as "{}" and empty sequences as "[]", so that types
are preserved when round-tripping PolymorphicTraits. This change has
equivalent semantics, but may break e.g. tests which compare output
verbatim.
Differential Revision: https://reviews.llvm.org/D48144
llvm-svn: 346884
This patch adds an initial implementation of the look-ahead SLP tree
construction described in 'Look-Ahead SLP: Auto-vectorization in the Presence
of Commutative Operations, CGO 2018 by Vasileios Porpodas, Rodrigo C. O. Rocha,
Luís F. W. Góes'.
It returns an SLP tree represented as VPInstructions, with combined
instructions represented as a single, wider VPInstruction.
This initial version does not support instructions with multiple
different users (either inside or outside the SLP tree) or
non-instruction operands; it won't generate any shuffles or
insertelement instructions.
It also just adds the analysis that builds an SLP tree rooted in a set
of stores. It does not include any cost modeling or memory legality
checks. The plan is to integrate it with VPlan based cost modeling, once
available and to only apply it to operations that can be widened.
A follow-up patch will add a support for replacing instructions in a
VPlan with their SLP counter parts.
Reviewers: Ayal, mssimpso, rengolin, mkuper, hfinkel, hsaito, dcaballe, vporpo, RKSimon, ABataev
Reviewed By: rengolin
Differential Revision: https://reviews.llvm.org/D4949
llvm-svn: 346857
The definition of `pointer_iterator` omits what should be a `iterator_traits::<>::iterator_category` parameter from `iterator_adaptor_base`. As a result, iterators based on `pointer_iterator` always have defaulted value types and the wrong iterator category.
The definition of `pointee_iterator` just a few lines above does this correctly.
This resolves [[ https://bugs.llvm.org/show_bug.cgi?id=39617 | bug 39617 ]].
Patch by Dylan MacKenzie!
Reviewers: dblaikie
Differential Revision: https://reviews.llvm.org/D54377
llvm-svn: 346833
Summary:
Ranges base address specifiers can save a lot of object size in
relocation records especially in optimized builds.
For an optimized self-host build of Clang with split DWARF and debug
info compression in object files, but uncompressed debug info in the
executable, this change produces about 18% smaller object files and 6%
larger executable.
While it would've been nice to turn this on by default, gold's 32 bit
gdb-index support crashes on this input & I don't think there's any
perfect heuristic to implement solely in LLVM that would suffice - so
we'll need a flag one way or another (also possible people might want to
aggressively optimized for executable size that contains debug info
(even with compression this would still come at some cost to executable
size)) - so let's plumb it through.
Differential Revision: https://reviews.llvm.org/D54242
llvm-svn: 346788
In D54435 there was some discussion about the expand_tilde flag for
real_path that I wanted to expose through the VFS. The consensus is that
these two things should be separate functions. Since we already have the
code for this I went ahead and added a function expand_tilde that does
just that.
Differential revision: https://reviews.llvm.org/D54448
llvm-svn: 346776
This patch updates DuplicateInstructionsInSplitBetween to update a DTU
instead of applying updates to the DT directly.
Given that there only are 2 users, also updated them in this patch to
avoid churn.
I slightly moved the code in CallSiteSplitting around to reduce the
places where we have to pass in DTU. If necessary, I could split those
changes in a separate patch.
This fixes missing DT updates when dealing with musttail calls in
CallSiteSplitting, by using DTU->deleteBB.
Reviewers: junbuml, kuhar, NutshellySima, indutny, brzycki
Reviewed By: NutshellySima
llvm-svn: 346769
In a lot of places an empty string was passed as the ErrorBanner to
logAllUnhandledErrors. This patch makes that argument optional to
simplify the call sites.
llvm-svn: 346604
Summary:
This simplifies the code and moves everything to tablegen for consistency. This
also prepares the ground for adding issue counters.
Reviewers: gchatelet, john.brawn, jsji
Subscribers: nemanjai, mgorny, javed.absar, kbarton, tschuett, llvm-commits
Differential Revision: https://reviews.llvm.org/D54297
llvm-svn: 346489
Armando Montanez