In Polly we used to have a mix of test cases, some that used 'opt %s' and others
that used 'opt < %s'. We now change all to use 'opt < %s'. Piping in test files
is preferable as it does prevent temporary files to be written to disk. This
brings us in line with what is usus in LLVM.
llvm-svn: 216816
This replaces the use of %defaultOpts = '-basicaa -polly-prepare' with the
minimal set of passes necessary for a test to succeed. Of the test cases that
previously used %defaultOpts 76 test cases require none of these passes, 42
need -basicaa and only 2 need -polly-prepare. Our change makes this requirement
explicit.
In Polly many test cases have been using a macro '%defaultOpts' which run a
couple of preparing passes before the actual Polly test case. This macro was
introduced very early in the development of Polly and originally contained a
large set of canonicalization passes. However, as the need for additional
canonicalization passes makes test cases harder to understand and also more
fragile in terms of changes in such passes, we aim since a longer time to only
include the minimal set of passes necessary. This patch removes the last
leftovers from of %defaultOpts and brings our tests cases more in line to what
is usus in LLVM itself.
llvm-svn: 216815
Arcanist (arc) will now always run linters before uploading any new
commit to Phabricator. All errors/warnings (or their absence) will be
shown in the web interface together with a explanation by the commiter
(arcanist will ask the commiter if the build was not clean).
The linters include:
- clang-format
- spelling check
- permissions check (aka. chmod)
- filename check
- merge conflict marker check
Note, that their scope is sometimes limited (see .arclint for
details).
This commit also fixes all errors and warnings these linters reported,
namely:
- spelling mistakes and typos
- executable permissions for various text files
Differential Revision: http://reviews.llvm.org/D4916
llvm-svn: 215871
This will spill out information about LLVM-internals. However, in cases
where the name of the Value matches the name of the array in the source,
we provide more useful information. In cases where we spill internals,
the information still might help the user to pin down the correct
arrays.
The problem we face here is: The error is pinned to the debug location
of one of the offending values out of the alias set instead of all of them.
The more information we give the user about the set of aliasing
pointers the better.
llvm-svn: 215830
This reverts commit 215466 (and 215528, a trivial formatting fix).
The intention of these commits is a good one, but unfortunately they broke
our LNT buildbot:
http://lab.llvm.org:8011/builders/perf-x86_64-penryn-O3-polly-codegen-isl
Several of the cleanup changes that have been combined in this 'fixup' are
trivial and could probably be committed as obvious changes without risking to
break the build. The remaining changes are little and it should be easy to
figure out what went wrong.
llvm-svn: 215817
This reverts commit 215684. The intention of the commit is great, but
unfortunately it seems to be the cause of 14 LNT test suite failures:
http://lab.llvm.org:8011/builders/perf-x86_64-penryn-O3-polly/builds/116
To make our buildbots and performance testers green until this issue is solved,
we temporarily revert this commit.
llvm-svn: 215816
The support is limited to signed modulo access and condition
expressions with a constant right hand side, e.g., A[i % 2] or
A[i % 9]. Test cases are modified according to this new feature and
new test cases are added.
Differential Revision: http://reviews.llvm.org/D4843
llvm-svn: 215684
There is no needed for neither 1-dimensional nor higher dimensional arrays to
require positive offsets in the outermost array dimension.
We originally introduced this assumption with the support for delinearizing
multi-dimensional arrays.
llvm-svn: 214665
+ Remove the class IslGenerator which duplicates the functionality of
IslExprBuilder.
+ Use the IslExprBuilder to create code for memory access relations.
+ Also handle array types during access creation.
+ Enable scev codegen for one of the transformed memory access tests,
thus access creation without canonical induction variables available.
+ Update one test case to the new output.
llvm-svn: 214659
The updated tests use a different context than the old ones did.
Other than that only their path and the code generation we use
changed.
llvm-svn: 214657
Use the fact that if we visit a for node first in pre and next in post order
we know we did not visit any children, thus we found an innermost loop.
+ Test case for an innermost loop with a conditional inside
llvm-svn: 213870
+ Introduced dependency type TYPE_TC_RED to represent the transitive closure
(& the reverse) of reduction dependences. These are used when we check for
reduction parallel loops.
+ Test cases including loop reversals and modulo schedules which compute
reductions in a alternated order.
llvm-svn: 213019
We move back to a simple approach where the liveout is the last must-write
statement for a data-location plus all may-write statements. The previous
approach did not work out. We would have to consider per-data-access
dependences, instead of per-statement dependences to correct it. As this adds
complexity and it seems we would not gain anything over the simpler approach
that we implement in this commit, I moved us back to the old approach of
computing the liveout, but enhanced it to also add may-write accesses.
We also fix the test case and explain why we can not perform dead code
elimination in this case.
llvm-svn: 212925
As our delinearization works optimistically, we need in some cases run-time
checks that verify our optimistic assumptions. A simple example is the
following code:
void foo(long n, long m, long o, double A[n][m][o]) {
for (long i = 0; i < 100; i++)
for (long j = 0; j < 150; j++)
for (long k = 0; k < 200; k++)
A[i][j][k] = 1.0;
}
After clang linearized the access to A and we delinearized it again to
A[i][j][k] we need to ensure that we do not access the delinearized array
out of bounds (this information is not available in LLVM-IR). Hence, we
need to verify the following constraints at run-time:
CHECK: Assumed Context:
CHECK: [o, m] -> { : m >= 150 and o >= 200 }
llvm-svn: 212198
This change is particularly useful in the code generation as we need
to know which binary operator/identity element we need to combine/initialize
the privatization locations.
+ Print the reduction type for each memory access
+ Adjusted the test cases to comply with the new output format and
to test for the right reduction type
llvm-svn: 212126
Iterate over all store memory accesses and check for valid binary reduction
candidate loads by following the operands of the stored value. For each
candidate pair we check if they have the same base address and there are no
other accesses which may overlap with them. This ensures that no intermediate
value can escape into other memory locations or is overwritten at some point.
+ 17 test cases for reduction detection and reduction dependency modeling
llvm-svn: 211957
Enabling -keep-going in ScopDetection causes expansion to an invalid
Scop candidate.
Region A <- Valid candidate
|
Region B <- Invalid candidate
If -keep-going is enabled, ScopDetection would expand A to A+B because
the RejectLog is never checked for errors during expansion.
With this patch only A becomes a valid Scop.
llvm-svn: 211875
This change will ease the transision to multiple reductions per statement as
we can now distinguish the effects of multiple reductions in the same
statement.
+ Wrapped reduction dependences are used to compute privatization dependences
+ Modified test cases to account for the change
llvm-svn: 211795
This dependency analysis will keep track of memory accesses if they might be
part of a reduction. If not, the dependences are tracked on a statement level.
The main reason to do this is to reduce the compile time while beeing able to
distinguish the effects of reduction and non-reduction accesses.
+ Adjusted two test cases
llvm-svn: 211794
Add support for generating optimization remarks after completing the
detection of Scops.
The goal is to provide end-users with useful hints about opportunities that
help to increase the size of the detected Scops in their code.
By default the remark is unspecified and the debug location is empty. Future
patches have to expand on the messages generated.
This patch brings a simple test case for ReportFuncCall to demonstrate the
feature.
Reports all missed opportunities to increase the size/number of valid
Scops:
clang <...> -Rpass-missed="polly-detect" <...>
opt <...> -pass-remarks-missed="polly-detect" <...>
Reports beginning and end of all valid Scops:
clang <...> -Rpass="polly-detect" <...>
opt <...> -pass-remarks="polly-detect" <...>
Differential Revision: http://reviews.llvm.org/D4171
llvm-svn: 211769
Due to bad habit we sometimes used a variable %defaultOpts that listed
a set of passes commonly run to prepare for Polly. None of these test cases
actually needs special preparation and only two of them need the 'basicaa' to
be scheduled. Scheduling the required alias analysis explicitly makes the test
cases clearer.
llvm-svn: 211671
We had a set of test cases that have been incomplete and XFAILED. This patch
completes a couple of the interesting ones and removes the ones which seem
redundant or not sufficiently reduced to be useful.
llvm-svn: 211670
Insert a header into the new testcase containing a sample RUN line a FIXME and
an XFAIL. Then insert the formated C code and finally the LLVM-IR without
attributes, the module ID or the target triple.
llvm-svn: 211612
We use llvm.codegen intrinsic to generate code for embedded LLVM-IR
strings. The reason we introduce such a intrinsic is that previous
clang/opt tools was NOT linked with various LLVM targets and their
AsmParsers and AsmPrinters. Since clang/opt been linked with all the
needed libraries, we no longer need the llvm.codegen intrinsic.
llvm-svn: 211573
+ Collect reduction dependences
+ Introduced TYPE_RED in Dependences.h which can be used to obtain the
reduction dependences
+ Used TYPE_RED to prevent parallelization while we do not have a privatizing
code generation
+ Relax the dependences for non-parallel code generation
+ Add privatization dependences to ensure correctness
+ 12 Test cases to check for reduction and privatization dependences
llvm-svn: 211369
We do this currently only for test cases where we have integer offsets that
clearly access array dimensions out-of-bound.
-; for (long i = 0; i < n; i++)
-; for (long j = 0; j < m; j++)
-; for (long k = 0; k < o; k++)
+; for (long i = 0; i < n - 3; i++)
+; for (long j = 4; j < m; j++)
+; for (long k = 0; k < o - 7; k++)
; A[i+3][j-4][k+7] = 1.0;
This will be helpful if we later want to simplify the access functions under the
assumption that they do not access memory out of bounds.
llvm-svn: 210179
Without this patch, the testcase would fail on the delinearization of the second
array:
; void foo(long n, long m, long o, double A[n][m][o]) {
; for (long i = 0; i < n; i++)
; for (long j = 0; j < m; j++)
; for (long k = 0; k < o; k++) {
; A[i+3][j-4][k+7] = 1.0;
; A[i][0][k] = 2.0;
; }
; }
; CHECK: [n, m, o] -> { Stmt_for_body6[i0, i1, i2] -> MemRef_A[3 + i0, -4 + i1, 7 + i2] };
; CHECK: [n, m, o] -> { Stmt_for_body6[i0, i1, i2] -> MemRef_A[i0, 0, i2] };
Here is the output of FileCheck on the testcase without this patch:
; CHECK: [n, m, o] -> { Stmt_for_body6[i0, i1, i2] -> MemRef_A[i0, 0, i2] };
^
<stdin>:26:2: note: possible intended match here
[n, m, o] -> { Stmt_for_body6[i0, i1, i2] -> MemRef_A[o0] };
^
It is possible to find a good delinearization for A[i][0][k] only in the context
of the delinearization of both array accesses.
There are two ways to delinearize together all array subscripts touching the
same base address: either duplicate the code from scop detection to first gather
all array references and then run the delinearization; or as implemented in this
patch, use the same delinearization info that we computed during scop detection.
llvm-svn: 210117
+ CL-option --polly-tile-sizes=<int,...,int>
The i'th value is used as a tile size for dimension i, if
there is no i'th value, the value of --polly-default-tile-size is
used
+ CL-option --polly-default-tile-size=int
Used if no tile size is given for a dimension i
+ 3 Simple testcases
llvm-svn: 209753
Tag the GPGPU codegen test cases as unsupported if the nvptx target is not
included in the current llvm build.
Contributed-by: Yabin Hu <yabin.hwu@gmail.com>
llvm-svn: 208779
Tobias Grosser