I forgot to forward the chain, causing some missing instruction
dependencies. The test crashes the compiler without this patch.
Inspired by the test case, D33519 also tries to remove the extra sync.
Differential Revision: https://reviews.llvm.org/D33573
llvm-svn: 303931
There are some VectorShuffle Nodes in SDAG which can be selected to XXSLDWI
instruction, this patch recognizes them and does the selection to improve the
PPC performance.
llvm-svn: 303822
PPC backend eliminates compare instructions by using record-form instructions in PPCInstrInfo::optimizeCompareInstr, which is called from peephole optimization pass.
This patch improves this optimization to eliminate more compare instructions in two types of common case.
- comparison against a constant 1 or -1
The record-form instructions set CR bit based on signed comparison against 0. So, the current implementation does not exploit the record-form instruction for comparison against a non-zero constant.
This patch enables record-form optimization for constant of 1 or -1 if possible; it changes the condition "greater than -1" into "greater than or equal to 0" and "less than 1" into "less than or equal to 0".
With this patch, compare can be eliminated in the following code sequence, as an example.
uint64_t a, b;
if ((a | b) & 0x8000000000000000ull) { ... }
else { ... }
- andi for 32-bit comparison on PPC64
Since record-form instructions execute 64-bit signed comparison and so we have limitation in eliminating 32-bit comparison, i.e. with cmplwi, using the record-form. The original implementation already has such checks but andi. is not recognized as an instruction which executes implicit zero extension and hence safe to convert into record-form if used for equality check.
%1 = and i32 %a, 10
%2 = icmp ne i32 %1, 0
br i1 %2, label %foo, label %bar
In this simple example, LLVM generates andi. + cmplwi + beq on PPC64.
This patch make it possible to eliminate the cmplwi for this case.
I added andi. for optimization targets if it is safe to do so.
Differential Revision: https://reviews.llvm.org/D30081
llvm-svn: 303500
When legalizing vector operations on vNi128, they will be split to v1i128
because that is a legal type on ppc64, but then the compiler will crash in
selection dag because it fails to select for these operations. This patch fixes
shift operations. Logical shift right and left shift can be performed in the
vector unit, but algebraic shift right requires being split.
Differential Revision: https://reviews.llvm.org/D32774
llvm-svn: 303307
The variables MinGPR/MinG8R were not updated properly when resetting the
offsets, which in the included testcase lead to saving the CR register
in the same location as R30.
This fixes another issue reported in PR26519.
Differential Revision: https://reviews.llvm.org/D33017
llvm-svn: 303257
Summary:
This fixes pr32392.
The lowering pipeline is:
llvm.ppc.cfence in IR -> PPC::CFENCE8 in isel -> Actual instructions in
expandPostRAPseudo.
The reason why expandPostRAPseudo is chosen is because previous passes
are likely eliminating instructions like cmpw 3, 3 (early CSE) and bne-
7, .+4 (some branch pass(s)).
Differential Revision: https://reviews.llvm.org/D32763
llvm-svn: 303205
Summary:
In SelectionDAG, when a store is immediately chained to another store
to the same address, elide the first store as it has no observable
effects. This is causes small improvements dealing with intrinsics
lowered to stores.
Test notes:
* Many testcases overwrite store addresses multiple times and needed
minor changes, mainly making stores volatile to prevent the
optimization from optimizing the test away.
* Many X86 test cases optimized out instructions associated with
associated with va_start.
* Note that test_splat in CodeGen/AArch64/misched-stp.ll no longer has
dependencies to check and can probably be removed and potentially
replaced with another test.
Reviewers: rnk, john.brawn
Subscribers: aemerson, rengolin, qcolombet, jyknight, nemanjai, nhaehnle, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D33206
llvm-svn: 303198
At O3 we are more willing to increase size if we believe it will improve
performance. The current threshold for tail-duplication of 2 instructions is
conservative, and can be relaxed at O3.
Benchmark results:
llvm test-suite:
6% improvement in aha, due to duplication of loop latch
3% improvement in hexxagon
2% slowdown in lpbench. Seems related, but couldn't completely diagnose.
Internal google benchmark:
Produces 4% improvement on internal google protocol buffer serialization
benchmarks.
Differential-Revision: https://reviews.llvm.org/D32324
llvm-svn: 303084
According to Power ISA V3.0 document, the first source operand of mtvsrdd is constant 0 if r0 is specified. So the corresponding register constraint should be g8rc_nox0.
This bug caused wrong output generated by 401.bzip2 when -mcpu=power9 and fdo are specified.
Differential Revision: https://reviews.llvm.org/D32880
llvm-svn: 302834
This patch is the first in a series of patches to provide code gen for
doing compares in GPRs when the compare result is required in a GPR.
It adds the infrastructure to select GPR sequences for i1->i32 and i1->i64
extensions. This first patch handles equality comparison on i32 operands with
the result sign or zero extended.
Differential Revision: https://reviews.llvm.org/D31847
llvm-svn: 302810
Using arguments with attribute inalloca creates problems for verification
of machine representation. This attribute instructs the backend that the
argument is prepared in stack prior to CALLSEQ_START..CALLSEQ_END
sequence (see http://llvm.org/docs/InAlloca.htm for details). Frame size
stored in CALLSEQ_START in this case does not count the size of this
argument. However CALLSEQ_END still keeps total frame size, as caller can
be responsible for cleanup of entire frame. So CALLSEQ_START and
CALLSEQ_END keep different frame size and the difference is treated by
MachineVerifier as stack error. Currently there is no way to distinguish
this case from actual errors.
This patch adds additional argument to CALLSEQ_START and its
target-specific counterparts to keep size of stack that is set up prior to
the call frame sequence. This argument allows MachineVerifier to calculate
actual frame size associated with frame setup instruction and correctly
process the case of inalloca arguments.
The changes made by the patch are:
- Frame setup instructions get the second mandatory argument. It
affects all targets that use frame pseudo instructions and touched many
files although the changes are uniform.
- Access to frame properties are implemented using special instructions
rather than calls getOperand(N).getImm(). For X86 and ARM such
replacement was made previously.
- Changes that reflect appearance of additional argument of frame setup
instruction. These involve proper instruction initialization and
methods that access instruction arguments.
- MachineVerifier retrieves frame size using method, which reports sum of
frame parts initialized inside frame instruction pair and outside it.
The patch implements approach proposed by Quentin Colombet in
https://bugs.llvm.org/show_bug.cgi?id=27481#c1.
It fixes 9 tests failed with machine verifier enabled and listed
in PR27481.
Differential Revision: https://reviews.llvm.org/D32394
llvm-svn: 302527
This happened on the PPC32/SVR4 path and was discovered when building
FreeBSD on PPC32. It was a typo-class error in the frame lowering code.
This fixes PR26519.
llvm-svn: 302183
Summary:
This is the corresponding llvm change to D28037 to ensure no performance
regression.
Reviewers: bogner, kbarton, hfinkel, iteratee, echristo
Subscribers: nemanjai, llvm-commits
Differential Revision: https://reviews.llvm.org/D28329
llvm-svn: 301990
Fixes PR30730.
This is a re-commit of a pulled commit. The commit was pulled because some
software projects contained uses of Altivec vectors that violated alignment
requirements. Known issues have now been fixed.
Committing on behalf of Lei Huang.
Differential Revision: https://reviews.llvm.org/D26861
llvm-svn: 301892
Summary:
In some cases LLVM (especially the SLP vectorizer) will create vectors
that are 256 bytes (or larger). Given that this is intentional[0] is
likely to get more common, this patch updates the StackMap binary
format to deal with the spill locations for said vectors.
This change also bumps the stack map version from 2 to 3.
[0]: https://reviews.llvm.org/D32533#738350
Reviewers: reames, kavon, skatkov, javed.absar
Subscribers: mcrosier, nemanjai, llvm-commits
Differential Revision: https://reviews.llvm.org/D32629
llvm-svn: 301615
When functions are terminated by unreachable instructions, the last
instruction might trigger a CFI instruction to be generated. However,
emitting it would be be illegal since the function (and thus the FDE
the CFI is in) has already ended with the previous instruction.
Darwin's dwarfdump --verify --eh-frame complains about this and the
specification supports this.
Relevant bits from the DWARF 5 standard (6.4 Call Frame Information):
"[The] address_range [field in an FDE]: The number of bytes of
program instructions described by this entry."
"Row creation instructions: [...]
The new location value is always greater than the current one."
The first quotation implies that a CFI cannot describe a target
address outside of the enclosing FDE's range.
rdar://problem/26244988
Differential Revision: https://reviews.llvm.org/D32246
llvm-svn: 301219
This allows forming more 'not' ops, so we get improvements for ISAs that have and-not.
Follow-up to:
https://reviews.llvm.org/rL300725
llvm-svn: 300763
Check the legality of ISD::[US]MULO to see whether
Intrinsic::[us]mul_with_overflow will legalize into a function call (and, thus,
will use the CTR register). Fixes PR32485.
Patch by Tim Neumann!
Differential Revision: https://reviews.llvm.org/D31790
llvm-svn: 299910
The new codepath has been in the tree for years, and there isn't any
reason to use two codepaths here.
Differential Revision: https://reviews.llvm.org/D30596
llvm-svn: 299723
This is a generic combine enabled via target hook to reduce icmp logic as discussed in:
https://bugs.llvm.org/show_bug.cgi?id=32401
It's likely that other targets will want to enable this hook for scalar transforms,
and there are probably other patterns that can use bitwise logic to reduce comparisons.
Note that we are missing an IR canonicalization for these patterns, and we will probably
prefer the pair-of-compares form in IR (shorter, more likely to fold).
Differential Revision: https://reviews.llvm.org/D31483
llvm-svn: 299542
The code already allowed vector types in via "isInteger" (which might want
a more specific name), so use splat-friendly constant predicates to match
those types.
llvm-svn: 299304
(and (setlt X, 0), (setlt Y, 0)) --> (setlt (and X, Y), 0)
We have 7 similar folds, but this one got away. The fact that the
x86 test with a branch didn't change is probably a separate bug. We
may also be missing this and the related folds in instcombine.
llvm-svn: 299252
These are the same tests added for x86 with r299238,
but PPC doesn't specify all branches as cheap, so we
see different patterns in tests with branches.
llvm-svn: 299244
Now alternatively to the TargetOption.AllowFPOpFusion global flag, FMUL->FADD
can also use the per operation FMF to allow fusion.
The idea here is not to port everything to the new scheme (e.g. fused
multiply-and-sub will be ported later) but that this work all the way from
clang.
The transformation is conditionalized on *both* the FADD and the FMUL having
the FMF contract flag.
Differential Revision: https://reviews.llvm.org/D31169
llvm-svn: 299096
In PPCBoolRetToInt bool value is changed to i32 type. On ppc64 it may introduce an extra zero extension for the return value. This patch changes the integer type to i64 to avoid the zero extension on ppc64.
This patch fixed PR32442.
Differential Revision: https://reviews.llvm.org/D31407
llvm-svn: 298955
Summary:
For the following CFG:
A->B
B->C
A->C
If there is another edge B->D, then ABC should not be considered as triangle.
Reviewers: davidxl, iteratee
Reviewed By: iteratee
Subscribers: nemanjai, llvm-commits
Differential Revision: https://reviews.llvm.org/D31310
llvm-svn: 298661
Summary: Add tests for all atomic operations for powerpc64le, so that all changes can be easily examined.
Reviewers: kbarton, hfinkel, echristo
Subscribers: mehdi_amini, nemanjai, llvm-commits
Differential Revision: https://reviews.llvm.org/D31285
llvm-svn: 298614
I had ajusted the test case before when testing a chain of length 2, and then
reverted it with rL296845 when I switched to 3 triangles. After running
benchmarks and examining generated code at length 2 I forgot to put the test
back.
llvm-svn: 298000
mfvrd and mffprd are both alias to mfvrsd.
This patch enables correct parsing of the aliases, but we still emit a mfvrsd.
Committing on behalf of brunoalr (Bruno Rosa).
Differential Revision: https://reviews.llvm.org/D29177
llvm-svn: 297849
Recommiting with compiler time improvements
Recommitting after fixup of 32-bit aliasing sign offset bug in DAGCombiner.
* Simplify Consecutive Merge Store Candidate Search
Now that address aliasing is much less conservative, push through
simplified store merging search and chain alias analysis which only
checks for parallel stores through the chain subgraph. This is cleaner
as the separation of non-interfering loads/stores from the
store-merging logic.
When merging stores search up the chain through a single load, and
finds all possible stores by looking down from through a load and a
TokenFactor to all stores visited.
This improves the quality of the output SelectionDAG and the output
Codegen (save perhaps for some ARM cases where we correctly constructs
wider loads, but then promotes them to float operations which appear
but requires more expensive constant generation).
Some minor peephole optimizations to deal with improved SubDAG shapes (listed below)
Additional Minor Changes:
1. Finishes removing unused AliasLoad code
2. Unifies the chain aggregation in the merged stores across code
paths
3. Re-add the Store node to the worklist after calling
SimplifyDemandedBits.
4. Increase GatherAllAliasesMaxDepth from 6 to 18. That number is
arbitrary, but seems sufficient to not cause regressions in
tests.
5. Remove Chain dependencies of Memory operations on CopyfromReg
nodes as these are captured by data dependence
6. Forward loads-store values through tokenfactors containing
{CopyToReg,CopyFromReg} Values.
7. Peephole to convert buildvector of extract_vector_elt to
extract_subvector if possible (see
CodeGen/AArch64/store-merge.ll)
8. Store merging for the ARM target is restricted to 32-bit as
some in some contexts invalid 64-bit operations are being
generated. This can be removed once appropriate checks are
added.
This finishes the change Matt Arsenault started in r246307 and
jyknight's original patch.
Many tests required some changes as memory operations are now
reorderable, improving load-store forwarding. One test in
particular is worth noting:
CodeGen/PowerPC/ppc64-align-long-double.ll - Improved load-store
forwarding converts a load-store pair into a parallel store and
a memory-realized bitcast of the same value. However, because we
lose the sharing of the explicit and implicit store values we
must create another local store. A similar transformation
happens before SelectionDAG as well.
Reviewers: arsenm, hfinkel, tstellarAMD, jyknight, nhaehnle
llvm-svn: 297695
After inspection, it's an UB in our code base. Someone cast a var-arg
function pointer to a non-var-arg one. :/
Re-commit r296771 to continue testing on the patch.
Sorry for the trouble!
llvm-svn: 297256
This reverts commit r296771.
We found some wide spread test failures internally. I'm working on a
testcase. Politely revert the patch in the mean time. :)
llvm-svn: 297124
select Cond, C +/- 1, C --> add(ext Cond), C -- with a target hook.
This is part of the ongoing process to obsolete D24480. The motivation is to
canonicalize to select IR in InstCombine whenever possible, so we need to have a way to
undo that easily in codegen.
PowerPC is an obvious winner for this kind of transform because it has fast and complete
bit-twiddling abilities but generally lousy conditional execution perf (although this might
have changed in recent implementations).
x86 also sees some wins, but the effect is limited because these transforms already mostly
exist in its target-specific combineSelectOfTwoConstants(). The fact that we see any x86
changes just shows that that code is a mess of special-case holes. We may be able to remove
some of that logic now.
My guess is that other targets will want to enable this hook for most cases. The likely
follow-ups would be to add value type and/or the constants themselves as parameters for the
hook. As the tests in select_const.ll show, we can transform any select-of-constants to
math/logic, but the general transform for any 2 constants needs one more instruction
(multiply or 'and').
ARM is one target that I think may not want this for most cases. I see infinite loops there
because it wants to use selects to enable conditionally executed instructions.
Differential Revision: https://reviews.llvm.org/D30537
llvm-svn: 296977
This patch causes compile times for some patterns to explode. I have
a (large, unreduced) test case that slows down by more than 20x and
several test cases slow down by 2x. I'm sending some of the test cases
directly to Nirav and following up with more details in the review log,
but this should unblock anyone else hitting this.
llvm-svn: 296862
For chains of triangles with small join blocks that can be tail duplicated, a
simple calculation of probabilities is insufficient. Tail duplication
can be profitable in 3 different ways for these cases:
1) The post-dominators marked 50% are actually taken 56% (This shrinks with
longer chains)
2) The chains are statically correlated. Branch probabilities have a very
U-shaped distribution.
[http://nrs.harvard.edu/urn-3:HUL.InstRepos:24015805]
If the branches in a chain are likely to be from the same side of the
distribution as their predecessor, but are independent at runtime, this
transformation is profitable. (Because the cost of being wrong is a small
fixed cost, unlike the standard triangle layout where the cost of being
wrong scales with the # of triangles.)
3) The chains are dynamically correlated. If the probability that a previous
branch was taken positively influences whether the next branch will be
taken
We believe that 2 and 3 are common enough to justify the small margin in 1.
The code pre-scans a function's CFG to identify this pattern and marks the edges
so that the standard layout algorithm can use the computed results.
llvm-svn: 296845
This patch fixes pr32063.
Current code in PPCTargetLowering::PerformDAGCombine can transform
bswap
store
into a single PPCISD::STBRX instruction. but it doesn't consider the case that the operand size of bswap may be larger than store size. When it occurs, we need 2 modifications,
1 For the last operand of PPCISD::STBRX, we should not use DAG.getValueType(N->getOperand(1).getValueType()), instead we should use cast<StoreSDNode>(N)->getMemoryVT().
2 Before PPCISD::STBRX, we need to shift the original operand of bswap to the right side.
Differential Revision: https://reviews.llvm.org/D30362
llvm-svn: 296811
This patch reduces the stack frame size by not allocating the parameter area if
it is not required. In the current implementation LowerFormalArguments_64SVR4
already handles the parameter area, but LowerCall_64SVR4 does not
(when calculating the stack frame size). What this patch does is make
LowerCall_64SVR4 consistent with LowerFormalArguments_64SVR4.
Committing on behalf of Hiroshi Inoue.
Differential Revision: https://reviews.llvm.org/D29881
llvm-svn: 296771
This is part of the ongoing attempt to improve select codegen for all targets and select
canonicalization in IR (see D24480 for more background). The transform is a subset of what
is done in InstCombine's FoldOpIntoSelect().
I first noticed a regression in the x86 avx512-insert-extract.ll tests with a patch that
hopes to convert more selects to basic math ops. This appears to be a general missing DAG
transform though, so I added tests for all standard binops in rL296621
(PowerPC was chosen semi-randomly; it has scripted FileCheck support, but so do ARM and x86).
The poor output for "sel_constants_shl_constant" is tracked with:
https://bugs.llvm.org/show_bug.cgi?id=32105
Differential Revision: https://reviews.llvm.org/D30502
llvm-svn: 296699
This patch adds a MachineSSA pass that coalesces blocks that branch
on the same condition.
Committing on behalf of Lei Huang.
Differential Revision: https://reviews.llvm.org/D28249
llvm-svn: 296670
Resubmit r295336 after the bug with non-zero offset patterns on BE targets is fixed (r296336).
Support {a|s}ext, {a|z|s}ext load nodes as a part of load combine patters.
Reviewed By: filcab
Differential Revision: https://reviews.llvm.org/D29591
llvm-svn: 296651
Recommiting after fixup of 32-bit aliasing sign offset bug in DAGCombiner.
* Simplify Consecutive Merge Store Candidate Search
Now that address aliasing is much less conservative, push through
simplified store merging search and chain alias analysis which only
checks for parallel stores through the chain subgraph. This is cleaner
as the separation of non-interfering loads/stores from the
store-merging logic.
When merging stores search up the chain through a single load, and
finds all possible stores by looking down from through a load and a
TokenFactor to all stores visited.
This improves the quality of the output SelectionDAG and the output
Codegen (save perhaps for some ARM cases where we correctly constructs
wider loads, but then promotes them to float operations which appear
but requires more expensive constant generation).
Some minor peephole optimizations to deal with improved SubDAG shapes (listed below)
Additional Minor Changes:
1. Finishes removing unused AliasLoad code
2. Unifies the chain aggregation in the merged stores across code
paths
3. Re-add the Store node to the worklist after calling
SimplifyDemandedBits.
4. Increase GatherAllAliasesMaxDepth from 6 to 18. That number is
arbitrary, but seems sufficient to not cause regressions in
tests.
5. Remove Chain dependencies of Memory operations on CopyfromReg
nodes as these are captured by data dependence
6. Forward loads-store values through tokenfactors containing
{CopyToReg,CopyFromReg} Values.
7. Peephole to convert buildvector of extract_vector_elt to
extract_subvector if possible (see
CodeGen/AArch64/store-merge.ll)
8. Store merging for the ARM target is restricted to 32-bit as
some in some contexts invalid 64-bit operations are being
generated. This can be removed once appropriate checks are
added.
This finishes the change Matt Arsenault started in r246307 and
jyknight's original patch.
Many tests required some changes as memory operations are now
reorderable, improving load-store forwarding. One test in
particular is worth noting:
CodeGen/PowerPC/ppc64-align-long-double.ll - Improved load-store
forwarding converts a load-store pair into a parallel store and
a memory-realized bitcast of the same value. However, because we
lose the sharing of the explicit and implicit store values we
must create another local store. A similar transformation
happens before SelectionDAG as well.
Reviewers: arsenm, hfinkel, tstellarAMD, jyknight, nhaehnle
llvm-svn: 296476
Splitting critical edges when one of the source edges is an indirectbr
is hard in general (because it requires changing the memory the indirectbr
reads). But if a block only has a single indirectbr predecessor (which is
the common case), we can simulate splitting that edge by splitting
the destination block, and retargeting the *direct* branches.
This is motivated by the use of computed gotos in python 2.7: PyEval_EvalFrame()
ends up using an indirect branch with ~100 successors, and passing a constant to
each of those. Since MachineSink can't break indirect critical edges on demand
(and doing this in MIR doesn't look feasible), this causes us to emit about ~100
defs of registers containing constants, which we in the predecessor block, where
only one of those constants is used in each successor. So, at each computed goto,
we needlessly spill about a 100 constants to stack. The end result is that a
clang-compiled python interpreter can be about ~2.5x slower on a simple python
reduction loop than a gcc-compiled interpreter.
Differential Revision: https://reviews.llvm.org/D29916
llvm-svn: 296416
Recommiting after fixup of 32-bit aliasing sign offset bug in DAGCombiner.
* Simplify Consecutive Merge Store Candidate Search
Now that address aliasing is much less conservative, push through
simplified store merging search and chain alias analysis which only
checks for parallel stores through the chain subgraph. This is cleaner
as the separation of non-interfering loads/stores from the
store-merging logic.
When merging stores search up the chain through a single load, and
finds all possible stores by looking down from through a load and a
TokenFactor to all stores visited.
This improves the quality of the output SelectionDAG and the output
Codegen (save perhaps for some ARM cases where we correctly constructs
wider loads, but then promotes them to float operations which appear
but requires more expensive constant generation).
Some minor peephole optimizations to deal with improved SubDAG shapes (listed below)
Additional Minor Changes:
1. Finishes removing unused AliasLoad code
2. Unifies the chain aggregation in the merged stores across code
paths
3. Re-add the Store node to the worklist after calling
SimplifyDemandedBits.
4. Increase GatherAllAliasesMaxDepth from 6 to 18. That number is
arbitrary, but seems sufficient to not cause regressions in
tests.
5. Remove Chain dependencies of Memory operations on CopyfromReg
nodes as these are captured by data dependence
6. Forward loads-store values through tokenfactors containing
{CopyToReg,CopyFromReg} Values.
7. Peephole to convert buildvector of extract_vector_elt to
extract_subvector if possible (see
CodeGen/AArch64/store-merge.ll)
8. Store merging for the ARM target is restricted to 32-bit as
some in some contexts invalid 64-bit operations are being
generated. This can be removed once appropriate checks are
added.
This finishes the change Matt Arsenault started in r246307 and
jyknight's original patch.
Many tests required some changes as memory operations are now
reorderable, improving load-store forwarding. One test in
particular is worth noting:
CodeGen/PowerPC/ppc64-align-long-double.ll - Improved load-store
forwarding converts a load-store pair into a parallel store and
a memory-realized bitcast of the same value. However, because we
lose the sharing of the explicit and implicit store values we
must create another local store. A similar transformation
happens before SelectionDAG as well.
Reviewers: arsenm, hfinkel, tstellarAMD, jyknight, nhaehnle
llvm-svn: 296252
Splitting critical edges when one of the source edges is an indirectbr
is hard in general (because it requires changing the memory the indirectbr
reads). But if a block only has a single indirectbr predecessor (which is
the common case), we can simulate splitting that edge by splitting
the destination block, and retargeting the *direct* branches.
This is motivated by the use of computed gotos in python 2.7: PyEval_EvalFrame()
ends up using an indirect branch with ~100 successors, and passing a constant to
each of those. Since MachineSink can't break indirect critical edges on demand
(and doing this in MIR doesn't look feasible), this causes us to emit about ~100
defs of registers containing constants, which we in the predecessor block, where
only one of those constants is used in each successor. So, at each computed goto,
we needlessly spill about a 100 constants to stack. The end result is that a
clang-compiled python interpreter can be about ~2.5x slower on a simple python
reduction loop than a gcc-compiled interpreter.
Differential Revision: https://reviews.llvm.org/D29916
llvm-svn: 296149
Provide a 64-bit pattern to use SUBFIC for subtracting from a 16-bit immediate.
The corresponding pattern already exists for 32-bit integers.
Committing on behalf of Hiroshi Inoue.
Differential Revision: https://reviews.llvm.org/D29387
llvm-svn: 296144
Emit clrrdi (extended mnemonic for rldicr) for AND-ing with masks that
clear bits from the right hand size.
Committing on behalf of Hiroshi Inoue.
Differential Revision: https://reviews.llvm.org/D29388
llvm-svn: 296143
The motivation for filling out these select-of-constants cases goes back to D24480,
where we discussed removing an IR fold from add(zext) --> select. And that goes back to:
https://reviews.llvm.org/rL75531https://reviews.llvm.org/rL159230
The idea is that we should always canonicalize patterns like this to a select-of-constants
in IR because that's the smallest IR and the best for value tracking. Note that we currently
do the opposite in some cases (like the cases in *this* patch). Ie, the proposed folds in
this patch already exist in InstCombine today:
https://github.com/llvm-mirror/llvm/blob/master/lib/Transforms/InstCombine/InstCombineSelect.cpp#L1151
As this patch shows, most targets generate better machine code for simple ext/add/not ops
rather than a select of constants. So the follow-up steps to make this less of a patchwork
of special-case folds and missing IR canonicalization:
1. Have DAGCombiner convert any select of constants into ext/add/not ops.
2 Have InstCombine canonicalize in the other direction (create more selects).
Differential Revision: https://reviews.llvm.org/D30180
llvm-svn: 296137
Splitting critical edges when one of the source edges is an indirectbr
is hard in general (because it requires changing the memory the indirectbr
reads). But if a block only has a single indirectbr predecessor (which is
the common case), we can simulate splitting that edge by splitting
the destination block, and retargeting the *direct* branches.
This is motivated by the use of computed gotos in python 2.7: PyEval_EvalFrame()
ends up using an indirect branch with ~100 successors, and passing a constant to
each of those. Since MachineSink can't break indirect critical edges on demand
(and doing this in MIR doesn't look feasible), this causes us to emit about ~100
defs of registers containing constants, which we in the predecessor block, where
only one of those constants is used in each successor. So, at each computed goto,
we needlessly spill about a 100 constants to stack. The end result is that a
clang-compiled python interpreter can be about ~2.5x slower on a simple python
reduction loop than a gcc-compiled interpreter.
Differential Revision: https://reviews.llvm.org/D29916
llvm-svn: 296060
Resubmit -r295314 with PowerPC and AMDGPU tests updated.
Support {a|s}ext, {a|z|s}ext load nodes as a part of load combine patters.
Reviewed By: filcab
Differential Revision: https://reviews.llvm.org/D29591
llvm-svn: 295336
Lay out trellis-shaped CFGs optimally.
A trellis of the shape below:
A B
|\ /|
| \ / |
| X |
| / \ |
|/ \|
C D
would be laid out A; B->C ; D by the current layout algorithm. Now we identify
trellises and lay them out either A->C; B->D or A->D; B->C. This scales with an
increasing number of predecessors. A trellis is a a group of 2 or more
predecessor blocks that all have the same successors.
because of this we can tail duplicate to extend existing trellises.
As an example consider the following CFG:
B D F H
/ \ / \ / \ / \
A---C---E---G---Ret
Where A,C,E,G are all small (Currently 2 instructions).
The CFG preserving layout is then A,B,C,D,E,F,G,H,Ret.
The current code will copy C into B, E into D and G into F and yield the layout
A,C,B(C),E,D(E),F(G),G,H,ret
define void @straight_test(i32 %tag) {
entry:
br label %test1
test1: ; A
%tagbit1 = and i32 %tag, 1
%tagbit1eq0 = icmp eq i32 %tagbit1, 0
br i1 %tagbit1eq0, label %test2, label %optional1
optional1: ; B
call void @a()
br label %test2
test2: ; C
%tagbit2 = and i32 %tag, 2
%tagbit2eq0 = icmp eq i32 %tagbit2, 0
br i1 %tagbit2eq0, label %test3, label %optional2
optional2: ; D
call void @b()
br label %test3
test3: ; E
%tagbit3 = and i32 %tag, 4
%tagbit3eq0 = icmp eq i32 %tagbit3, 0
br i1 %tagbit3eq0, label %test4, label %optional3
optional3: ; F
call void @c()
br label %test4
test4: ; G
%tagbit4 = and i32 %tag, 8
%tagbit4eq0 = icmp eq i32 %tagbit4, 0
br i1 %tagbit4eq0, label %exit, label %optional4
optional4: ; H
call void @d()
br label %exit
exit:
ret void
}
here is the layout after D27742:
straight_test: # @straight_test
; ... Prologue elided
; BB#0: # %entry ; A (merged with test1)
; ... More prologue elided
mr 30, 3
andi. 3, 30, 1
bc 12, 1, .LBB0_2
; BB#1: # %test2 ; C
rlwinm. 3, 30, 0, 30, 30
beq 0, .LBB0_3
b .LBB0_4
.LBB0_2: # %optional1 ; B (copy of C)
bl a
nop
rlwinm. 3, 30, 0, 30, 30
bne 0, .LBB0_4
.LBB0_3: # %test3 ; E
rlwinm. 3, 30, 0, 29, 29
beq 0, .LBB0_5
b .LBB0_6
.LBB0_4: # %optional2 ; D (copy of E)
bl b
nop
rlwinm. 3, 30, 0, 29, 29
bne 0, .LBB0_6
.LBB0_5: # %test4 ; G
rlwinm. 3, 30, 0, 28, 28
beq 0, .LBB0_8
b .LBB0_7
.LBB0_6: # %optional3 ; F (copy of G)
bl c
nop
rlwinm. 3, 30, 0, 28, 28
beq 0, .LBB0_8
.LBB0_7: # %optional4 ; H
bl d
nop
.LBB0_8: # %exit ; Ret
ld 30, 96(1) # 8-byte Folded Reload
addi 1, 1, 112
ld 0, 16(1)
mtlr 0
blr
The tail-duplication has produced some benefit, but it has also produced a
trellis which is not laid out optimally. With this patch, we improve the layouts
of such trellises, and decrease the cost calculation for tail-duplication
accordingly.
This patch produces the layout A,C,E,G,B,D,F,H,Ret. This layout does have
back edges, which is a negative, but it has a bigger compensating
positive, which is that it handles the case where there are long strings
of skipped blocks much better than the original layout. Both layouts
handle runs of executed blocks equally well. Branch prediction also
improves if there is any correlation between subsequent optional blocks.
Here is the resulting concrete layout:
straight_test: # @straight_test
; BB#0: # %entry ; A (merged with test1)
mr 30, 3
andi. 3, 30, 1
bc 12, 1, .LBB0_4
; BB#1: # %test2 ; C
rlwinm. 3, 30, 0, 30, 30
bne 0, .LBB0_5
.LBB0_2: # %test3 ; E
rlwinm. 3, 30, 0, 29, 29
bne 0, .LBB0_6
.LBB0_3: # %test4 ; G
rlwinm. 3, 30, 0, 28, 28
bne 0, .LBB0_7
b .LBB0_8
.LBB0_4: # %optional1 ; B (Copy of C)
bl a
nop
rlwinm. 3, 30, 0, 30, 30
beq 0, .LBB0_2
.LBB0_5: # %optional2 ; D (Copy of E)
bl b
nop
rlwinm. 3, 30, 0, 29, 29
beq 0, .LBB0_3
.LBB0_6: # %optional3 ; F (Copy of G)
bl c
nop
rlwinm. 3, 30, 0, 28, 28
beq 0, .LBB0_8
.LBB0_7: # %optional4 ; H
bl d
nop
.LBB0_8: # %exit
Differential Revision: https://reviews.llvm.org/D28522
llvm-svn: 295223
Adds the vnot extended mnemonic for the vnor instruction.
Committing on behalf of brunoalr (Bruno Rosa).
Differential Revision: https://reviews.llvm.org/D29225
llvm-svn: 294330
Summary:
llc would hit a fatal error for errors in inline assembly. The
diagnostics message is now printed.
Reviewers: rengolin, MatzeB, javed.absar, anemet
Reviewed By: anemet
Subscribers: jyknight, nemanjai, llvm-commits
Differential Revision: https://reviews.llvm.org/D29408
llvm-svn: 293999
Recommiting after fixing X86 inc/dec chain bug.
* Simplify Consecutive Merge Store Candidate Search
Now that address aliasing is much less conservative, push through
simplified store merging search and chain alias analysis which only
checks for parallel stores through the chain subgraph. This is cleaner
as the separation of non-interfering loads/stores from the
store-merging logic.
When merging stores search up the chain through a single load, and
finds all possible stores by looking down from through a load and a
TokenFactor to all stores visited.
This improves the quality of the output SelectionDAG and the output
Codegen (save perhaps for some ARM cases where we correctly constructs
wider loads, but then promotes them to float operations which appear
but requires more expensive constant generation).
Some minor peephole optimizations to deal with improved SubDAG shapes (listed below)
Additional Minor Changes:
1. Finishes removing unused AliasLoad code
2. Unifies the chain aggregation in the merged stores across code
paths
3. Re-add the Store node to the worklist after calling
SimplifyDemandedBits.
4. Increase GatherAllAliasesMaxDepth from 6 to 18. That number is
arbitrary, but seems sufficient to not cause regressions in
tests.
5. Remove Chain dependencies of Memory operations on CopyfromReg
nodes as these are captured by data dependence
6. Forward loads-store values through tokenfactors containing
{CopyToReg,CopyFromReg} Values.
7. Peephole to convert buildvector of extract_vector_elt to
extract_subvector if possible (see
CodeGen/AArch64/store-merge.ll)
8. Store merging for the ARM target is restricted to 32-bit as
some in some contexts invalid 64-bit operations are being
generated. This can be removed once appropriate checks are
added.
This finishes the change Matt Arsenault started in r246307 and
jyknight's original patch.
Many tests required some changes as memory operations are now
reorderable, improving load-store forwarding. One test in
particular is worth noting:
CodeGen/PowerPC/ppc64-align-long-double.ll - Improved load-store
forwarding converts a load-store pair into a parallel store and
a memory-realized bitcast of the same value. However, because we
lose the sharing of the explicit and implicit store values we
must create another local store. A similar transformation
happens before SelectionDAG as well.
Reviewers: arsenm, hfinkel, tstellarAMD, jyknight, nhaehnle
llvm-svn: 293893
The the following instructions:
- LD/LWZ (expanded from sjLj pseudo-instructions)
- LXVL/LXVLL vector loads
- STXVL/STXVLL vector stores
all require G8RC_NO0X class registers for RA.
Differential Revision: https://reviews.llvm.org/D29289
Committed for Lei Huang
llvm-svn: 293769
When choosing the best successor for a block, ordinarily we would have preferred
a block that preserves the CFG unless there is a strong probability the other
direction. For small blocks that can be duplicated we now skip that requirement
as well, subject to some simple frequency calculations.
Differential Revision: https://reviews.llvm.org/D28583
llvm-svn: 293716
Summary:
The affected transforms all implicitly use associativity of addition,
for which we usually require unsafe math to be enabled.
The "Aggressive" flag is only meant to convey information about the
performance of the fused ops relative to a fmul+fadd sequence.
Fixes Bug 31626.
Reviewers: spatel, hfinkel, mehdi_amini, arsenm, tstellarAMD
Subscribers: jholewinski, nemanjai, wdng, llvm-commits
Differential Revision: https://reviews.llvm.org/D28675
llvm-svn: 293635
Just adds the vmr (Vector Move Register) mnemonic for the VOR instruction in
the PPC back end.
Committing on behalf of brunoalr (Bruno Rosa).
Differential Revision: https://reviews.llvm.org/D29133
llvm-svn: 293626
1) Explicitly sets mayLoad/mayStore property in the tablegen files on load/store
instructions.
2) Updated the flags on a number of intrinsics indicating that they write
memory.
3) Added SDNPMemOperand flags for some target dependent SDNodes so that they
propagate their memory operand
Review: https://reviews.llvm.org/D28818
llvm-svn: 293200
* Simplify Consecutive Merge Store Candidate Search
Now that address aliasing is much less conservative, push through
simplified store merging search and chain alias analysis which only
checks for parallel stores through the chain subgraph. This is cleaner
as the separation of non-interfering loads/stores from the
store-merging logic.
When merging stores search up the chain through a single load, and
finds all possible stores by looking down from through a load and a
TokenFactor to all stores visited.
This improves the quality of the output SelectionDAG and the output
Codegen (save perhaps for some ARM cases where we correctly constructs
wider loads, but then promotes them to float operations which appear
but requires more expensive constant generation).
Some minor peephole optimizations to deal with improved SubDAG shapes (listed below)
Additional Minor Changes:
1. Finishes removing unused AliasLoad code
2. Unifies the chain aggregation in the merged stores across code
paths
3. Re-add the Store node to the worklist after calling
SimplifyDemandedBits.
4. Increase GatherAllAliasesMaxDepth from 6 to 18. That number is
arbitrary, but seems sufficient to not cause regressions in
tests.
5. Remove Chain dependencies of Memory operations on CopyfromReg
nodes as these are captured by data dependence
6. Forward loads-store values through tokenfactors containing
{CopyToReg,CopyFromReg} Values.
7. Peephole to convert buildvector of extract_vector_elt to
extract_subvector if possible (see
CodeGen/AArch64/store-merge.ll)
8. Store merging for the ARM target is restricted to 32-bit as
some in some contexts invalid 64-bit operations are being
generated. This can be removed once appropriate checks are
added.
This finishes the change Matt Arsenault started in r246307 and
jyknight's original patch.
Many tests required some changes as memory operations are now
reorderable, improving load-store forwarding. One test in
particular is worth noting:
CodeGen/PowerPC/ppc64-align-long-double.ll - Improved load-store
forwarding converts a load-store pair into a parallel store and
a memory-realized bitcast of the same value. However, because we
lose the sharing of the explicit and implicit store values we
must create another local store. A similar transformation
happens before SelectionDAG as well.
Reviewers: arsenm, hfinkel, tstellarAMD, jyknight, nhaehnle
llvm-svn: 293184
And teach shouldAssumeDSOLocal that ppc has no copy relocations.
The resulting code handle a few more case than before. For example, it
knows that a weak symbol can be resolved to another .o file, but it
will still be in the main executable.
llvm-svn: 293180
Summary:
This patch changes the layout of DoubleAPFloat, and adjust all
operations to do either:
1) (IEEEdouble, IEEEdouble) -> (uint64_t, uint64_t) -> PPCDoubleDoubleImpl,
then run the old algorithm.
2) Do the right thing directly.
1) includes multiply, divide, remainder, mod, fusedMultiplyAdd, roundToIntegral,
convertFromString, next, convertToInteger, convertFromAPInt,
convertFromSignExtendedInteger, convertFromZeroExtendedInteger,
convertToHexString, toString, getExactInverse.
2) includes makeZero, makeLargest, makeSmallest, makeSmallestNormalized,
compare, bitwiseIsEqual, bitcastToAPInt, isDenormal, isSmallest,
isLargest, isInteger, ilogb, scalbn, frexp, hash_value, Profile.
I could split this into two patches, e.g. use
1) for all operatoins first, then incrementally change some of them to
2). I didn't do that, because 1) involves code that converts data between
PPCDoubleDoubleImpl and (IEEEdouble, IEEEdouble) back and forth, and may
pessimize the compiler. Instead, I find easy functions and use
approach 2) for them directly.
Next step is to implement move multiply and divide from 1) to 2). I don't
have plans for other functions in 1).
Differential Revision: https://reviews.llvm.org/D27872
llvm-svn: 292839
Generally, the ISEL is expanded into if-then-else sequence, in some
cases (like when the destination register is the same with the true
or false value register), it may just be expanded into just the if
or else sequence.
llvm-svn: 292154
Generally, the ISEL is expanded into if-then-else sequence, in some
cases (like when the destination register is the same with the true
or false value register), it may just be expanded into just the if
or else sequence.
llvm-svn: 292128
This reverts commit ada6595a526d71df04988eb0a4b4fe84df398ded.
This needs a simple probability check because there are some cases where it is
not profitable.
llvm-svn: 291695
Summary:
Previously if you had
* a function with the fast-math-enabled attr, followed by
* a function without the fast-math attr,
the second function would inherit the first function's fast-math-ness.
This means that mixing fast-math and non-fast-math functions in a module
was completely broken unless you explicitly annotated every
non-fast-math function with "unsafe-fp-math"="false". This appears to
have been broken since r176986 (March 2013), when the resetTargetOptions
function was introduced.
This patch tests the correct behavior as best we can. I don't think I
can test FPDenormalMode and NoTrappingFPMath, because they aren't used
in any backends during function lowering. Surprisingly, I also can't
find any uses at all of LessPreciseFPMAD affecting generated code.
The NVPTX/fast-math.ll test changes are an expected result of fixing
this bug. When FMA is disabled, we emit add as "add.rn.f32", which
prevents fma combining. Before this patch, fast-math was enabled in all
functions following the one which explicitly enabled it on itself, so we
were emitting plain "add.f32" where we should have generated
"add.rn.f32".
Reviewers: mkuper
Subscribers: hfinkel, majnemer, jholewinski, nemanjai, llvm-commits
Differential Revision: https://reviews.llvm.org/D28507
llvm-svn: 291618
When choosing the best successor for a block, ordinarily we would have preferred
a block that preserves the CFG unless there is a strong probability the other
direction. For small blocks that can be duplicated we now skip that requirement
as well.
Differential revision: https://reviews.llvm.org/D27742
llvm-svn: 291609
If a vector index is out of bounds, the result is supposed to be
undefined but is not undefined behavior. Change the legalization
for indexing the vector on the stack so that an out of bounds
index does not create an out of bounds memory access.
llvm-svn: 291604
Summary:
When promoting fp-to-uint16 to fp-to-sint32, the result is actually zero
extended. For example, given double 65534.0, without legalization:
fp-to-uint16: 65534.0 -> 0xfffe
With the legalization:
fp-to-sint32: 65534.0 -> 0x0000fffe
Without this patch, legalization wrongly emits a signed extend assertion,
which is consumed by later icmp instruction, and cause miscompile.
Note that the floating point value must be in [0, 65535), otherwise the
behavior is undefined.
This patch reverts r279223 behavior and adds more tests and
documentations.
In PR29041's context, James Molloy mentioned that:
We don't need to mask because conversion from float->uint8_t is
undefined if the integer part of the float value is not representable in
uint8_t. Therefore we can assume this doesn't happen!
which is totally true and good, because fptoui is documented clearly to
have undefined behavior when overflow/underflow happens. We should take
the advantage of this behavior so that we can save unnecessary mask
instructions.
Reviewers: jmolloy, nadav, echristo, kbarton
Subscribers: mehdi_amini, nemanjai, llvm-commits
Differential Revision: https://reviews.llvm.org/D28284
llvm-svn: 291015
This change aims to unify and correct our logic for when we need to allow for
the possibility of the linker adding a TOC restoration instruction after a
call. This comes up in two contexts:
1. When determining tail-call eligibility. If we make a tail call (i.e.
directly branch to a function) then there is no place for the linker to add
a TOC restoration.
2. When determining when we need to add a nop instruction after a call.
Likewise, if there is a possibility that the linker might need to add a
TOC restoration after a call, then we need to put a nop after the call
(the bl instruction).
First problem: We were using similar, but different, logic to decide (1) and
(2). This is just wrong. Both the resideInSameModule function (used when
determining tail-call eligibility) and the isLocalCall function (used when
deciding if the post-call nop is needed) were supposed to be determining the
same underlying fact (i.e. might a TOC restoration be needed after the call).
The same logic should be used in both places.
Second problem: The logic in both places was wrong. We only know that two
functions will share the same TOC when both functions come from the same
section of the same object. Otherwise the linker might cause the functions to
use different TOC base addresses (unless the multi-TOC linker option is
disabled, in which case only shared-library boundaries are relevant). There are
a number of factors that can cause functions to be placed in different sections
or come from different objects (-ffunction-sections, explicitly-specified
section names, COMDAT, weak linkage, etc.). All of these need to be checked.
The existing logic only checked properties of the callee, but the properties of
the caller must also be checked (for example, calling from a function in a
COMDAT section means calling between sections).
There was a conceptual error in the resideInSameModule function in that it
allowed tail calls to functions with weak linkage and protected/hidden
visibility. While protected/hidden visibility does prevent the function
implementation from being replaced at runtime (via interposition), it does not
prevent the linker from using an alternate implementation at link time (i.e.
using some strong definition to replace the provided weak one during linking).
If this happens, then we're still potentially looking at a required TOC
restoration upon return.
Otherwise, in general, the post-call nop is needed wherever ELF interposition
needs to be supported. We don't currently support ELF interposition at the IR
level (see http://lists.llvm.org/pipermail/llvm-dev/2016-November/107625.html
for more information), and I don't think we should try to make it appear to
work in the backend in spite of that fact. Unfortunately, because of the way
that the ABI works, we need to generate code as if we supported interposition
whenever the linker might insert stubs for the purpose of supporting it.
Differential Revision: https://reviews.llvm.org/D27231
llvm-svn: 291003
This patch renumbers the metadata nodes in debug info testcases after
https://reviews.llvm.org/D26769. This is a separate patch because it
causes so much churn. This was implemented with a python script that
pipes the testcases through llvm-as - | llvm-dis - and then goes
through the original and new output side-by side to insert all
comments at a close-enough location.
Differential Revision: https://reviews.llvm.org/D27765
llvm-svn: 290292
This patch implements PR31013 by introducing a
DIGlobalVariableExpression that holds a pair of DIGlobalVariable and
DIExpression.
Currently, DIGlobalVariables holds a DIExpression. This is not the
best way to model this:
(1) The DIGlobalVariable should describe the source level variable,
not how to get to its location.
(2) It makes it unsafe/hard to update the expressions when we call
replaceExpression on the DIGLobalVariable.
(3) It makes it impossible to represent a global variable that is in
more than one location (e.g., a variable with multiple
DW_OP_LLVM_fragment-s). We also moved away from attaching the
DIExpression to DILocalVariable for the same reasons.
This reapplies r289902 with additional testcase upgrades and a change
to the Bitcode record for DIGlobalVariable, that makes upgrading the
old format unambiguous also for variables without DIExpressions.
<rdar://problem/29250149>
https://llvm.org/bugs/show_bug.cgi?id=31013
Differential Revision: https://reviews.llvm.org/D26769
llvm-svn: 290153
This reverts commit 289920 (again).
I forgot to implement a Bitcode upgrade for the case where a DIGlobalVariable
has not DIExpression. Unfortunately it is not possible to safely upgrade
these variables without adding a flag to the bitcode record indicating which
version they are.
My plan of record is to roll the planned follow-up patch that adds a
unit: field to DIGlobalVariable into this patch before recomitting.
This way we only need one Bitcode upgrade for both changes (with a
version flag in the bitcode record to safely distinguish the record
formats).
Sorry for the churn!
llvm-svn: 289982
This patch appears to result in trampolines in vtables being miscompiled
when they in turn tail call a method.
I've posted some preliminary details about the failure on the thread for
this commit and talked to Hal. He was comfortable going ahead and
reverting until we sort out what is wrong.
llvm-svn: 289928
This patch implements PR31013 by introducing a
DIGlobalVariableExpression that holds a pair of DIGlobalVariable and
DIExpression.
Currently, DIGlobalVariables holds a DIExpression. This is not the
best way to model this:
(1) The DIGlobalVariable should describe the source level variable,
not how to get to its location.
(2) It makes it unsafe/hard to update the expressions when we call
replaceExpression on the DIGLobalVariable.
(3) It makes it impossible to represent a global variable that is in
more than one location (e.g., a variable with multiple
DW_OP_LLVM_fragment-s). We also moved away from attaching the
DIExpression to DILocalVariable for the same reasons.
This reapplies r289902 with additional testcase upgrades.
<rdar://problem/29250149>
https://llvm.org/bugs/show_bug.cgi?id=31013
Differential Revision: https://reviews.llvm.org/D26769
llvm-svn: 289920
This patch implements PR31013 by introducing a
DIGlobalVariableExpression that holds a pair of DIGlobalVariable and
DIExpression.
Currently, DIGlobalVariables holds a DIExpression. This is not the
best way to model this:
(1) The DIGlobalVariable should describe the source level variable,
not how to get to its location.
(2) It makes it unsafe/hard to update the expressions when we call
replaceExpression on the DIGLobalVariable.
(3) It makes it impossible to represent a global variable that is in
more than one location (e.g., a variable with multiple
DW_OP_LLVM_fragment-s). We also moved away from attaching the
DIExpression to DILocalVariable for the same reasons.
<rdar://problem/29250149>
https://llvm.org/bugs/show_bug.cgi?id=31013
Differential Revision: https://reviews.llvm.org/D26769
llvm-svn: 289902
Removing sensitivity to scheduling (by using CHECK-DAG instead of CHECK) and
some other minor corrections.
In preparation to commit Power9 processor model.
llvm-svn: 289900
This test is currently sensitive to scheduling. Using CHECK-DAG allows us to
preserve the main purpose of the test and remove this sensivity.
In preparation to commit Power9 processor model.
llvm-svn: 289869
In some situations, the BUILD_VECTOR node that builds a v18i8 vector by
a splat of an i8 constant will end up with signed 8-bit values and other
situations, it'll end up with unsigned ones. Handle both situations.
Fixes PR31340.
llvm-svn: 289804
Most of the PowerPC64 code generation for the ELF ABI is already PIC.
There are four main exceptions:
(1) Constant pointer arrays etc. should in writeable sections.
(2) The TOC restoration NOP after a call is needed for all global
symbols. While GNU ld has a workaround for questionable GCC self-calls,
we trigger the checks for calls from COMDAT sections as they cross input
sections and are therefore not considered self-calls. The current
decision is questionable and suboptimal, but outside the scope of the
change.
(3) TLS access can not use the initial-exec model.
(4) Jump tables should use relative addresses. Note that the current
encoding doesn't work for the large code model, but it is more compact
than the default for any non-trivial jump table. Improving this is again
beyond the scope of this change.
At least (1) and (3) are assumptions made in target-independent code and
introducing additional hooks is a bit messy. Testing with clang shows
that a -fPIC binary is 600KB smaller than the corresponding -fno-pic
build. Separate testing from improved jump table encodings would explain
only about 100KB or so. The rest is expected to be a result of more
aggressive immediate forming for -fno-pic, where the -fPIC binary just
uses TOC entries.
This change brings the LLVM output in line with the GCC output, other
PPC64 compilers like XLC on AIX are known to produce PIC by default
as well. The relocation model can still be provided explicitly, i.e.
when using MCJIT.
One test case for case (1) is included, other test cases with relocation
mode sensitive behavior are wired to static for now. They will be
reviewed and adjusted separately.
Differential Revision: https://reviews.llvm.org/D26566
llvm-svn: 289743
Retrying after fixing after removing load-store factoring through
token factors in favor of improved token factor operand pruning
Simplify Consecutive Merge Store Candidate Search
Now that address aliasing is much less conservative, push through
simplified store merging search which only checks for parallel stores
through the chain subgraph. This is cleaner as the separation of
non-interfering loads/stores from the store-merging logic.
Whem merging stores, search up the chain through a single load, and
finds all possible stores by looking down from through a load and a
TokenFactor to all stores visited. This improves the quality of the
output SelectionDAG and generally the output CodeGen (with some
exceptions).
Additional Minor Changes:
1. Finishes removing unused AliasLoad code
2. Unifies the the chain aggregation in the merged stores across
code paths
3. Re-add the Store node to the worklist after calling
SimplifyDemandedBits.
4. Increase GatherAllAliasesMaxDepth from 6 to 18. That number is
arbitrary, but seemed sufficient to not cause regressions in
tests.
This finishes the change Matt Arsenault started in r246307 and
jyknight's original patch.
Many tests required some changes as memory operations are now
reorderable. Some tests relying on the order were changed to use
volatile memory operations
Noteworthy tests:
CodeGen/AArch64/argument-blocks.ll -
It's not entirely clear what the test_varargs_stackalign test is
supposed to be asserting, but the new code looks right.
CodeGen/AArch64/arm64-memset-inline.lli -
CodeGen/AArch64/arm64-stur.ll -
CodeGen/ARM/memset-inline.ll -
The backend now generates *worse* code due to store merging
succeeding, as we do do a 16-byte constant-zero store efficiently.
CodeGen/AArch64/merge-store.ll -
Improved, but there still seems to be an extraneous vector insert
from an element to itself?
CodeGen/PowerPC/ppc64-align-long-double.ll -
Worse code emitted in this case, due to the improved store->load
forwarding.
CodeGen/X86/dag-merge-fast-accesses.ll -
CodeGen/X86/MergeConsecutiveStores.ll -
CodeGen/X86/stores-merging.ll -
CodeGen/Mips/load-store-left-right.ll -
Restored correct merging of non-aligned stores
CodeGen/AMDGPU/promote-alloca-stored-pointer-value.ll -
Improved. Correctly merges buffer_store_dword calls
CodeGen/AMDGPU/si-triv-disjoint-mem-access.ll -
Improved. Sidesteps loading a stored value and
merges two stores
CodeGen/X86/pr18023.ll -
This test has been removed, as it was asserting incorrect
behavior. Non-volatile stores *CAN* be moved past volatile loads,
and now are.
CodeGen/X86/vector-idiv.ll -
CodeGen/X86/vector-lzcnt-128.ll -
It's basically impossible to tell what these tests are actually
testing. But, looks like the code got better due to the memory
operations being recognized as non-aliasing.
CodeGen/X86/win32-eh.ll -
Both loads of the securitycookie are now merged.
Reviewers: arsenm, hfinkel, tstellarAMD, jyknight, nhaehnle
Subscribers: wdng, nhaehnle, nemanjai, arsenm, weimingz, niravd, RKSimon, aemerson, qcolombet, dsanders, resistor, tstellarAMD, t.p.northover, spatel
Differential Revision: https://reviews.llvm.org/D14834
llvm-svn: 289659
This change aims to unify and correct our logic for when we need to allow for
the possibility of the linker adding a TOC restoration instruction after a
call. This comes up in two contexts:
1. When determining tail-call eligibility. If we make a tail call (i.e.
directly branch to a function) then there is no place for the linker to add
a TOC restoration.
2. When determining when we need to add a nop instruction after a call.
Likewise, if there is a possibility that the linker might need to add a
TOC restoration after a call, then we need to put a nop after the call
(the bl instruction).
First problem: We were using similar, but different, logic to decide (1) and
(2). This is just wrong. Both the resideInSameModule function (used when
determining tail-call eligibility) and the isLocalCall function (used when
deciding if the post-call nop is needed) were supposed to be determining the
same underlying fact (i.e. might a TOC restoration be needed after the call).
The same logic should be used in both places.
Second problem: The logic in both places was wrong. We only know that two
functions will share the same TOC when both functions come from the same
section of the same object. Otherwise the linker might cause the functions to
use different TOC base addresses (unless the multi-TOC linker option is
disabled, in which case only shared-library boundaries are relevant). There are
a number of factors that can cause functions to be placed in different sections
or come from different objects (-ffunction-sections, explicitly-specified
section names, COMDAT, weak linkage, etc.). All of these need to be checked.
The existing logic only checked properties of the callee, but the properties of
the caller must also be checked (for example, calling from a function in a
COMDAT section means calling between sections).
There was a conceptual error in the resideInSameModule function in that it
allowed tail calls to functions with weak linkage and protected/hidden
visibility. While protected/hidden visibility does prevent the function
implementation from being replaced at runtime (via interposition), it does not
prevent the linker from using an alternate implementation at link time (i.e.
using some strong definition to replace the provided weak one during linking).
If this happens, then we're still potentially looking at a required TOC
restoration upon return.
Otherwise, in general, the post-call nop is needed wherever ELF interposition
needs to be supported. We don't currently support ELF interposition at the IR
level (see http://lists.llvm.org/pipermail/llvm-dev/2016-November/107625.html
for more information), and I don't think we should try to make it appear to
work in the backend in spite of that fact. This will yield subtle bugs if
interposition is attempted. As a result, regardless of whether we're in PIC
mode, we don't assume that we need to add the nop to support the possibility of
ELF interposition. However, the necessary check is in place (i.e. calling
GV->isInterposable and TM.shouldAssumeDSOLocal) so when we have functions for
which interposition is allowed at the IR level, we'll add the nop as necessary.
In the mean time, we'll generate more tail calls and fewer nops when compiling
position-independent code.
Differential Revision: https://reviews.llvm.org/D27231
llvm-svn: 289638
Power8 has MTVSRWZ but no LXSIBZX/LXSIHZX, so move 1 or 2 bytes to VSR through MTVSRWZ is much faster than store the extended value into stack and load it with LXSIWZX.
This patch fixes pr31144.
Differential Revision: https://reviews.llvm.org/D27287
llvm-svn: 289473
Retrying after fixing overly aggressive load-store forwarding optimization.
Simplify Consecutive Merge Store Candidate Search
Now that address aliasing is much less conservative, push through
simplified store merging search which only checks for parallel stores
through the chain subgraph. This is cleaner as the separation of
non-interfering loads/stores from the store-merging logic.
Whem merging stores, search up the chain through a single load, and
finds all possible stores by looking down from through a load and a
TokenFactor to all stores visited. This improves the quality of the
output SelectionDAG and generally the output CodeGen (with some
exceptions).
Additional Minor Changes:
1. Finishes removing unused AliasLoad code
2. Unifies the the chain aggregation in the merged stores across
code paths
3. Re-add the Store node to the worklist after calling
SimplifyDemandedBits.
4. Increase GatherAllAliasesMaxDepth from 6 to 18. That number is
arbitrary, but seemed sufficient to not cause regressions in
tests.
This finishes the change Matt Arsenault started in r246307 and
jyknight's original patch.
Many tests required some changes as memory operations are now
reorderable. Some tests relying on the order were changed to use
volatile memory operations
Noteworthy tests:
CodeGen/AArch64/argument-blocks.ll -
It's not entirely clear what the test_varargs_stackalign test is
supposed to be asserting, but the new code looks right.
CodeGen/AArch64/arm64-memset-inline.lli -
CodeGen/AArch64/arm64-stur.ll -
CodeGen/ARM/memset-inline.ll -
The backend now generates *worse* code due to store merging
succeeding, as we do do a 16-byte constant-zero store efficiently.
CodeGen/AArch64/merge-store.ll -
Improved, but there still seems to be an extraneous vector insert
from an element to itself?
CodeGen/PowerPC/ppc64-align-long-double.ll -
Worse code emitted in this case, due to the improved store->load
forwarding.
CodeGen/X86/dag-merge-fast-accesses.ll -
CodeGen/X86/MergeConsecutiveStores.ll -
CodeGen/X86/stores-merging.ll -
CodeGen/Mips/load-store-left-right.ll -
Restored correct merging of non-aligned stores
CodeGen/AMDGPU/promote-alloca-stored-pointer-value.ll -
Improved. Correctly merges buffer_store_dword calls
CodeGen/AMDGPU/si-triv-disjoint-mem-access.ll -
Improved. Sidesteps loading a stored value and
merges two stores
CodeGen/X86/pr18023.ll -
This test has been removed, as it was asserting incorrect
behavior. Non-volatile stores *CAN* be moved past volatile loads,
and now are.
CodeGen/X86/vector-idiv.ll -
CodeGen/X86/vector-lzcnt-128.ll -
It's basically impossible to tell what these tests are actually
testing. But, looks like the code got better due to the memory
operations being recognized as non-aliasing.
CodeGen/X86/win32-eh.ll -
Both loads of the securitycookie are now merged.
Reviewers: arsenm, hfinkel, tstellarAMD, jyknight, nhaehnle
Subscribers: wdng, nhaehnle, nemanjai, arsenm, weimingz, niravd, RKSimon, aemerson, qcolombet, dsanders, resistor, tstellarAMD, t.p.northover, spatel
Differential Revision: https://reviews.llvm.org/D14834
llvm-svn: 289221
This is the final patch in the series of patches that improves
BUILD_VECTOR handling on PowerPC. This adds a few peephole optimizations
to remove redundant instructions. It also adds a large test case which
encompasses a large set of code patterns that build vectors - this test
case was the motivator for this series of patches.
Differential Revision: https://reviews.llvm.org/D26066
llvm-svn: 288800
This commit caused some miscompiles that did not show up on any of the bots.
Reverting until we can investigate the cause of those failures.
llvm-svn: 288214
This patch corresponds to review:
https://reviews.llvm.org/D25912
This is the first patch in a series of 4 that improve the lowering and combining
for BUILD_VECTOR nodes on PowerPC.
llvm-svn: 288152
Forward store values to matching loads down through token
factors. Factored from D14834.
Reviewers: jyknight, hfinkel
Subscribers: hfinkel, nemanjai, llvm-commits
Differential Revision: https://reviews.llvm.org/D26080
llvm-svn: 287773
When we see a SETCC whose only users are zero extend operations, we can replace
it with a subtraction. This results in doing all calculations in GPRs and
avoids CR use.
Currently we do this only for ULT, ULE, UGT and UGE condition codes. There are
ways that this can be extended. For example for signed condition codes. In that
case we will be introducing additional sign extend instructions, so more careful
profitability analysis may be required.
Another direction to extend this is for equal, not equal conditions. Also when
users of SETCC are any_ext or sign_ext, we might be able to do something
similar.
llvm-svn: 287329
For the default, small and medium code model, use the existing
difference from the jump table towards the label. For all other code
models, setup the picbase and use the difference between the picbase and
the block address.
Overall, this results in smaller data tables at the expensive of one or
two more arithmetic operation at the jump site. Given that we only create
jump tables with a lot more than two entries, it is a net win in size.
For larger code models the assumption remains that individual functions
are no larger than 2GB.
Differential Revision: https://reviews.llvm.org/D26336
llvm-svn: 287059
This patch implements all the overloads for vec_xl_be and vec_xst_be. On BE,
they behaves exactly the same with vec_xl and vec_xst, therefore they are
simply implemented by defining a matching macro. On LE, they are implemented
by defining new builtins and intrinsics. For int/float/long long/double, it
is just a load (lxvw4x/lxvd2x) or store(stxvw4x/stxvd2x). For char/char/short,
we also need some extra shuffling before or after call the builtins to get the
desired BE order. For int128, simply call vec_xl or vec_xst.
llvm-svn: 286967
add an intrinsic to expose the 'VSX Scalar Convert Half-Precision to
Single-Precision' instruction.
Differential review: https://reviews.llvm.org/D26536
llvm-svn: 286862
This patch corresponds to review:
https://reviews.llvm.org/D26480
Adds all the intrinsics used for various permute builtins that will
be added to altivec.h.
llvm-svn: 286638
This patch corresponds to review:
https://reviews.llvm.org/D26307
Adds all the intrinsics used for various conversion builtins that will
be added to altivec.h. These are type conversions between various types of
vectors.
llvm-svn: 286596
addSchedBarrierDeps() is supposed to add use operands to the ExitSU
node. The current implementation adds uses for calls/barrier instruction
and the MBB live-outs in all other cases. The use
operands of conditional jump instructions were missed.
Also added code to macrofusion to set the latencies between nodes to
zero to avoid problems with the fusing nodes lingering around in the
pending list now.
Differential Revision: https://reviews.llvm.org/D25140
llvm-svn: 286544
This testcase was originally part of r284995, but I put it in a wrong directory.
So I removed it. Before adding it back I did some small enhancements. Also I
changed the assertions a little bit, to take into account the impact of some
changes performed since code review is done.
This is similar to changes done for another testcase in the original commit.
See: https://reviews.llvm.org/D23614#577749
Basically for instead of vxor we now generate xxlxor in some cases, which is
better.
llvm-svn: 285333
This patch corresponds to review:
https://reviews.llvm.org/D25896
It just eliminates the redundant ZExt after a count trailing zeros instruction.
llvm-svn: 285267
This patch ensures that if a floating point vector operand is legalized by
expanding, it is legalized through the stack rather than by calling
DAGTypeLegalizer::IntegerToVector which will cause a failure since the operand
is a non-integer type.
This fixes PR 30715.
llvm-svn: 285231
https://reviews.llvm.org/D24924
This improves the code generated for a sequence of AND, ANY_EXT, SRL instructions. This is a targetted fix for this special pattern. The pattern is generated by target independet dag combiner and so a more general fix may not be necessary. If we come across other similar cases, some ideas for handling it are discussed on the code review.
llvm-svn: 284983
Use mask and negate for legalization of i1 source type with SIGN_EXTEND_INREG.
With the mask, this should be no worse than 2 shifts. The mask can be eliminated
in some cases, so that should be better than 2 shifts.
This change exposed some missing folds related to negation:
https://reviews.llvm.org/rL284239https://reviews.llvm.org/rL284395
There may be others, so please let me know if you see any regressions.
Differential Revision: https://reviews.llvm.org/D25485
llvm-svn: 284611
This is a patch to implement pr30640.
When a 64bit constant has the same hi/lo words, we can use rldimi to copy the low word into high word of the same register.
This optimization caused failure of test case bperm.ll because of not optimal heuristic in function SelectAndParts64. It chooses AND or ROTATE to extract bit groups from a register, and OR them together. This optimization lowers the cost of loading 64bit constant mask used in AND method, and causes different code sequence. But actually ROTATE method is better in this test case. The reason is in ROTATE method the final OR operation can be avoided since rldimi can insert the rotated bits into target register directly. So this patch also enhances SelectAndParts64 to prefer ROTATE method when the two methods have same cost and there are multiple bit groups need to be ORed together.
Differential Revision: https://reviews.llvm.org/D25521
llvm-svn: 284276
Retrying after upstream changes.
Simplify Consecutive Merge Store Candidate Search
Now that address aliasing is much less conservative, push through
simplified store merging search which only checks for parallel stores
through the chain subgraph. This is cleaner as the separation of
non-interfering loads/stores from the store-merging logic.
Whem merging stores, search up the chain through a single load, and
finds all possible stores by looking down from through a load and a
TokenFactor to all stores visited. This improves the quality of the
output SelectionDAG and generally the output CodeGen (with some
exceptions).
Additional Minor Changes:
1. Finishes removing unused AliasLoad code
2. Unifies the the chain aggregation in the merged stores across
code paths
3. Re-add the Store node to the worklist after calling
SimplifyDemandedBits.
4. Increase GatherAllAliasesMaxDepth from 6 to 18. That number is
arbitrary, but seemed sufficient to not cause regressions in
tests.
This finishes the change Matt Arsenault started in r246307 and
jyknight's original patch.
Many tests required some changes as memory operations are now
reorderable. Some tests relying on the order were changed to use
volatile memory operations
Noteworthy tests:
CodeGen/AArch64/argument-blocks.ll -
It's not entirely clear what the test_varargs_stackalign test is
supposed to be asserting, but the new code looks right.
CodeGen/AArch64/arm64-memset-inline.lli -
CodeGen/AArch64/arm64-stur.ll -
CodeGen/ARM/memset-inline.ll -
The backend now generates *worse* code due to store merging
succeeding, as we do do a 16-byte constant-zero store efficiently.
CodeGen/AArch64/merge-store.ll -
Improved, but there still seems to be an extraneous vector insert
from an element to itself?
CodeGen/PowerPC/ppc64-align-long-double.ll -
Worse code emitted in this case, due to the improved store->load
forwarding.
CodeGen/X86/dag-merge-fast-accesses.ll -
CodeGen/X86/MergeConsecutiveStores.ll -
CodeGen/X86/stores-merging.ll -
CodeGen/Mips/load-store-left-right.ll -
Restored correct merging of non-aligned stores
CodeGen/AMDGPU/promote-alloca-stored-pointer-value.ll -
Improved. Correctly merges buffer_store_dword calls
CodeGen/AMDGPU/si-triv-disjoint-mem-access.ll -
Improved. Sidesteps loading a stored value and
merges two stores
CodeGen/X86/pr18023.ll -
This test has been removed, as it was asserting incorrect
behavior. Non-volatile stores *CAN* be moved past volatile loads,
and now are.
CodeGen/X86/vector-idiv.ll -
CodeGen/X86/vector-lzcnt-128.ll -
It's basically impossible to tell what these tests are actually
testing. But, looks like the code got better due to the memory
operations being recognized as non-aliasing.
CodeGen/X86/win32-eh.ll -
Both loads of the securitycookie are now merged.
CodeGen/AMDGPU/vgpr-spill-emergency-stack-slot-compute.ll -
This test appears to work but no longer exhibits the spill behavior.
Reviewers: arsenm, hfinkel, tstellarAMD, jyknight, nhaehnle
Subscribers: wdng, nhaehnle, nemanjai, arsenm, weimingz, niravd, RKSimon, aemerson, qcolombet, dsanders, resistor, tstellarAMD, t.p.northover, spatel
Differential Revision: https://reviews.llvm.org/D14834
llvm-svn: 284151
Summary:
In PPCMIPeephole, when we see two splat instructions, we can't simply do the following transformation:
B = Splat A
C = Splat B
=>
C = Splat A
because B may still be used between these two instructions. Instead, we should make the second Splat a PPC::COPY and let later passes decide whether to remove it or not:
B = Splat A
C = Splat B
=>
B = Splat A
C = COPY B
Fixes PR30663.
Reviewers: echristo, iteratee, kbarton, nemanjai
Subscribers: mehdi_amini, llvm-commits
Differential Revision: https://reviews.llvm.org/D25493
llvm-svn: 283961
The tail duplication pass uses an assumed layout when making duplication
decisions. This is fine, but passes up duplication opportunities that
may arise when blocks are outlined. Because we want the updated CFG to
affect subsequent placement decisions, this change must occur during
placement.
In order to achieve this goal, TailDuplicationPass is split into a
utility class, TailDuplicator, and the pass itself. The pass delegates
nearly everything to the TailDuplicator object, except for looping over
the blocks in a function. This allows the same code to be used for tail
duplication in both places.
This change, in concert with outlining optional branches, allows
triangle shaped code to perform much better, esepecially when the
taken/untaken branches are correlated, as it creates a second spine when
the tests are small enough.
Issue from previous rollback fixed, and a new test was added for that
case as well. Issue was worklist/scheduling/taildup issue in layout.
Issue from 2nd rollback fixed, with 2 additional tests. Issue was
tail merging/loop info/tail-duplication causing issue with loops that share
a header block.
Issue with early tail-duplication of blocks that branch to a fallthrough
predecessor fixed with test case: tail-dup-branch-to-fallthrough.ll
Differential revision: https://reviews.llvm.org/D18226
llvm-svn: 283934
This reverts commit r283842.
test/CodeGen/X86/tail-dup-repeat.ll causes and llc crash with our
internal testing. I'll share a link with you.
llvm-svn: 283857
The tail duplication pass uses an assumed layout when making duplication
decisions. This is fine, but passes up duplication opportunities that
may arise when blocks are outlined. Because we want the updated CFG to
affect subsequent placement decisions, this change must occur during
placement.
In order to achieve this goal, TailDuplicationPass is split into a
utility class, TailDuplicator, and the pass itself. The pass delegates
nearly everything to the TailDuplicator object, except for looping over
the blocks in a function. This allows the same code to be used for tail
duplication in both places.
This change, in concert with outlining optional branches, allows
triangle shaped code to perform much better, esepecially when the
taken/untaken branches are correlated, as it creates a second spine when
the tests are small enough.
Issue from previous rollback fixed, and a new test was added for that
case as well. Issue was worklist/scheduling/taildup issue in layout.
Issue from 2nd rollback fixed, with 2 additional tests. Issue was
tail merging/loop info/tail-duplication causing issue with loops that share
a header block.
Issue with early tail-duplication of blocks that branch to a fallthrough
predecessor fixed with test case: tail-dup-branch-to-fallthrough.ll
Differential revision: https://reviews.llvm.org/D18226
llvm-svn: 283842
The tail duplication pass uses an assumed layout when making duplication
decisions. This is fine, but passes up duplication opportunities that
may arise when blocks are outlined. Because we want the updated CFG to
affect subsequent placement decisions, this change must occur during
placement.
In order to achieve this goal, TailDuplicationPass is split into a
utility class, TailDuplicator, and the pass itself. The pass delegates
nearly everything to the TailDuplicator object, except for looping over
the blocks in a function. This allows the same code to be used for tail
duplication in both places.
This change, in concert with outlining optional branches, allows
triangle shaped code to perform much better, esepecially when the
taken/untaken branches are correlated, as it creates a second spine when
the tests are small enough.
Issue from previous rollback fixed, and a new test was added for that
case as well. Issue was worklist/scheduling/taildup issue in layout.
Issue from 2nd rollback fixed, with 2 additional tests. Issue was
tail merging/loop info/tail-duplication causing issue with loops that share
a header block.
Differential revision: https://reviews.llvm.org/D18226
llvm-svn: 283619
This generalizes the build_vector -> vector_shuffle combine to support any
number of inputs. The idea is to create a binary tree of shuffles, where
the first layer performs pairwise shuffles of the input vectors placing each
input element into the correct lane, and the rest of the tree blends these
shuffles together.
This doesn't try to be smart and create any sort of "optimal" shuffles.
The assumption is that even a "poor" shuffle sequence is better than extracting
and inserting the elements one by one.
Differential Revision: https://reviews.llvm.org/D24683
llvm-svn: 283480
This reverts commit 062ace9764953e9769142c1099281a345f9b6bdc.
Issue with loop info and block removal revealed by polly.
I have a fix for this issue already in another patch, I'll re-roll this
together with that fix, and a test case.
llvm-svn: 283292
The tail duplication pass uses an assumed layout when making duplication
decisions. This is fine, but passes up duplication opportunities that
may arise when blocks are outlined. Because we want the updated CFG to
affect subsequent placement decisions, this change must occur during
placement.
In order to achieve this goal, TailDuplicationPass is split into a
utility class, TailDuplicator, and the pass itself. The pass delegates
nearly everything to the TailDuplicator object, except for looping over
the blocks in a function. This allows the same code to be used for tail
duplication in both places.
This change, in concert with outlining optional branches, allows
triangle shaped code to perform much better, esepecially when the
taken/untaken branches are correlated, as it creates a second spine when
the tests are small enough.
Issue from previous rollback fixed, and a new test was added for that
case as well.
Differential revision: https://reviews.llvm.org/D18226
llvm-svn: 283274
The motivation for the change is that we can't have pseudo-global settings for
codegen living in TargetOptions because that doesn't work with LTO.
Ideally, these reciprocal attributes will be moved to the instruction-level via
FMF, metadata, or something else. But making them function attributes is at least
an improvement over the current state.
The ingredients of this patch are:
Remove the reciprocal estimate command-line debug option.
Add TargetRecip to TargetLowering.
Remove TargetRecip from TargetOptions.
Clean up the TargetRecip implementation to work with this new scheme.
Set the default reciprocal settings in TargetLoweringBase (everything is off).
Update the PowerPC defaults, users, and tests.
Update the x86 defaults, users, and tests.
Note that if this patch needs to be reverted, the related clang patch checked in
at r283251 should be reverted too.
Differential Revision: https://reviews.llvm.org/D24816
llvm-svn: 283252
This patch corresponds to review:
The newly added VSX D-Form (register + offset) memory ops target the upper half
of the VSX register set. The existing ones target the lower half. In order to
unify these and have the ability to target all the VSX registers using D-Form
operations, this patch defines Pseudo-ops for the loads/stores which are
expanded post-RA. The expansion then choses the correct opcode based on the
register that was allocated for the operation.
llvm-svn: 283212
This patch corresponds to review:
https://reviews.llvm.org/D23155
This patch removes the VSHRC register class (based on D20310) and adds
exploitation of the Power9 sub-word integer loads into VSX registers as well
as vector sign extensions.
The new instructions are useful for a few purposes:
Int to Fp conversions of 1 or 2-byte values loaded from memory
Building vectors of 1 or 2-byte integers with values loaded from memory
Storing individual 1 or 2-byte elements from integer vectors
This patch implements all of those uses.
llvm-svn: 283190
The tail duplication pass uses an assumed layout when making duplication
decisions. This is fine, but passes up duplication opportunities that
may arise when blocks are outlined. Because we want the updated CFG to
affect subsequent placement decisions, this change must occur during
placement.
In order to achieve this goal, TailDuplicationPass is split into a
utility class, TailDuplicator, and the pass itself. The pass delegates
nearly everything to the TailDuplicator object, except for looping over
the blocks in a function. This allows the same code to be used for tail
duplication in both places.
This change, in concert with outlining optional branches, allows
triangle shaped code to perform much better, esepecially when the
taken/untaken branches are correlated, as it creates a second spine when
the tests are small enough.
llvm-svn: 283164
This change enables soft-float for PowerPC64, and also makes soft-float disable
all vector instruction sets for both 32-bit and 64-bit modes. This latter part
is necessary because the PPC backend canonicalizes many Altivec vector types to
floating-point types, and so soft-float breaks scalarization support for many
operations. Both for embedded targets and for operating-system kernels desiring
soft-float support, it seems reasonable that disabling hardware floating-point
also disables vector instructions (embedded targets without hardware floating
point support are unlikely to have Altivec, etc. and operating system kernels
desiring not to use floating-point registers to lower syscall cost are unlikely
to want to use vector registers either). If someone needs this to work, we'll
need to change the fact that we promote many Altivec operations to act on
v4f32. To make it possible to disable Altivec when soft-float is enabled,
hardware floating-point support needs to be expressed as a positive feature,
like the others, and not a negative feature, because target features cannot
have dependencies on the disabling of some other feature. So +soft-float has
now become -hard-float.
Fixes PR26970.
llvm-svn: 283060
Simplify Consecutive Merge Store Candidate Search
Now that address aliasing is much less conservative, push through
simplified store merging search which only checks for parallel stores
through the chain subgraph. This is cleaner as the separation of
non-interfering loads/stores from the store-merging logic.
Whem merging stores, search up the chain through a single load, and
finds all possible stores by looking down from through a load and a
TokenFactor to all stores visited. This improves the quality of the
output SelectionDAG and generally the output CodeGen (with some
exceptions).
Additional Minor Changes:
1. Finishes removing unused AliasLoad code
2. Unifies the the chain aggregation in the merged stores across
code paths
3. Re-add the Store node to the worklist after calling
SimplifyDemandedBits.
4. Increase GatherAllAliasesMaxDepth from 6 to 18. That number is
arbitrary, but seemed sufficient to not cause regressions in
tests.
This finishes the change Matt Arsenault started in r246307 and
jyknight's original patch.
Many tests required some changes as memory operations are now
reorderable. Some tests relying on the order were changed to use
volatile memory operations
Noteworthy tests:
CodeGen/AArch64/argument-blocks.ll -
It's not entirely clear what the test_varargs_stackalign test is
supposed to be asserting, but the new code looks right.
CodeGen/AArch64/arm64-memset-inline.lli -
CodeGen/AArch64/arm64-stur.ll -
CodeGen/ARM/memset-inline.ll -
The backend now generates *worse* code due to store merging
succeeding, as we do do a 16-byte constant-zero store efficiently.
CodeGen/AArch64/merge-store.ll -
Improved, but there still seems to be an extraneous vector insert
from an element to itself?
CodeGen/PowerPC/ppc64-align-long-double.ll -
Worse code emitted in this case, due to the improved store->load
forwarding.
CodeGen/X86/dag-merge-fast-accesses.ll -
CodeGen/X86/MergeConsecutiveStores.ll -
CodeGen/X86/stores-merging.ll -
CodeGen/Mips/load-store-left-right.ll -
Restored correct merging of non-aligned stores
CodeGen/AMDGPU/promote-alloca-stored-pointer-value.ll -
Improved. Correctly merges buffer_store_dword calls
CodeGen/AMDGPU/si-triv-disjoint-mem-access.ll -
Improved. Sidesteps loading a stored value and merges two stores
CodeGen/X86/pr18023.ll -
This test has been removed, as it was asserting incorrect
behavior. Non-volatile stores *CAN* be moved past volatile loads,
and now are.
CodeGen/X86/vector-idiv.ll -
CodeGen/X86/vector-lzcnt-128.ll -
It's basically impossible to tell what these tests are actually
testing. But, looks like the code got better due to the memory
operations being recognized as non-aliasing.
CodeGen/X86/win32-eh.ll -
Both loads of the securitycookie are now merged.
CodeGen/AMDGPU/vgpr-spill-emergency-stack-slot-compute.ll -
This test appears to work but no longer exhibits the spill
behavior.
Reviewers: arsenm, hfinkel, tstellarAMD, nhaehnle, jyknight
Subscribers: wdng, nhaehnle, nemanjai, arsenm, weimingz, niravd, RKSimon, aemerson, qcolombet, resistor, tstellarAMD, t.p.northover, spatel
Differential Revision: https://reviews.llvm.org/D14834
llvm-svn: 282600
This patch corresponds to review:
https://reviews.llvm.org/D24396
This patch adds support for the "vector count trailing zeroes",
"vector compare not equal" and "vector compare not equal or zero instructions"
as well as "scalar count trailing zeroes" instructions. It also changes the
vector negation to use XXLNOR (when VSX is enabled) so as not to increase
register pressure (previously this was done with a splat immediate of all
ones followed by an XXLXOR). This was done because the altivec.h
builtins (patch to follow) use vector negation and the use of an additional
register for the splat immediate is not optimal.
llvm-svn: 282478
This patch corresponds to review:
https://reviews.llvm.org/D21135
This patch exploits the following instructions:
mtvsrws
lxvwsx
mtvsrdd
mfvsrld
In order to improve some build_vector and extractelement patterns.
llvm-svn: 282246
Atomic comparison instructions use the sub-word load instruction on
Power8 and up but the value is not sign extended prior to the signed word
compare instruction. This patch adds that sign extension.
llvm-svn: 282182
This patch corresponds to review:
https://reviews.llvm.org/D19825
The new lxvx/stxvx instructions do not require the swaps to line the elements
up correctly. In order to select them over the lxvd2x/lxvw4x instructions which
require swaps, the patterns for the old instruction have a predicate that
ensures they won't be selected on Power9 and newer CPUs.
llvm-svn: 282143
Summary:
It was previously not possible for tools to use solely the stackmap
information emitted to reconstruct the return addresses of callsites in
the map, which is necessary to use the information to walk a stack. This
patch adds per-function callsite counts when emitting the stackmap
section in order to resolve the problem. Note that this slightly alters
the stackmap format, so external tools parsing these maps will need to
be updated.
**Problem Details:**
Records only store their offset from the beginning of the function they
belong to. While these records and the functions are output in program
order, it is not possible to determine where the end of one function's
records are without the callsite count when processing the records to
compute return addresses.
Patch by Kavon Farvardin!
Reviewers: atrick, ributzka, sanjoy
Subscribers: nemanjai
Differential Revision: https://reviews.llvm.org/D23487
llvm-svn: 281532
This patch corresponds to review:
https://reviews.llvm.org/D24021
In the initial implementation of this instruction, I forgot to account for
variable indices. This patch fixes PR30189 and should probably be merged into
3.9.1 (I'll open a bug according to the new instructions).
llvm-svn: 281479
This patch reverses the edge from DIGlobalVariable to GlobalVariable.
This will allow us to more easily preserve debug info metadata when
manipulating global variables.
Fixes PR30362. A program for upgrading test cases is attached to that
bug.
Differential Revision: http://reviews.llvm.org/D20147
llvm-svn: 281284
When folding an addi into a memory access that can take an immediate offset, we
were implicitly assuming that the existing offset was zero. This was incorrect.
If we're dealing with an addi with a plain constant, we can add it to the
existing offset (assuming that doesn't overflow the immediate, etc.), but if we
have anything else (i.e. something that will become a relocation expression),
we'll go back to requiring the existing immediate offset to be zero (because we
don't know what the requirements on that relocation expression might be - e.g.
maybe it is paired with some addis in some relevant way).
On the other hand, when dealing with a plain addi with a regular constant
immediate, the alignment restrictions (from the TOC base pointer, etc.) are
irrelevant.
I've added the test case from PR30280, which demonstrated the bug, but also
demonstrates a missed optimization opportunity (i.e. we don't need the memory
accesses at all).
Fixes PR30280.
llvm-svn: 280789
I might have called this "r246507, the sequel". It fixes the same issue, as the
issue has cropped up in a few more places. The underlying problem is that
isSetCCEquivalent can pick up select_cc nodes with a result type that is not
legal for a setcc node to have, and if we use that type to create new setcc
nodes, nothing fixes that (and so we've violated the contract that the
infrastructure has with the backend regarding setcc node types).
Fixes PR30276.
For convenience, here's the commit message from r246507, which explains the
problem is greater detail:
[DAGCombine] Fixup SETCC legality checking
SETCC is one of those special node types for which operation actions (legality,
etc.) is keyed off of an operand type, not the node's value type. This makes
sense because the value type of a legal SETCC node is determined by its
operands' value type (via the TLI function getSetCCResultType). When the
SDAGBuilder creates SETCC nodes, it either creates them with an MVT::i1 value
type, or directly with the value type provided by TLI.getSetCCResultType.
The first problem being fixed here is that DAGCombine had several places
querying TLI.isOperationLegal on SETCC, but providing the return of
getSetCCResultType, instead of the operand type directly. This does not mean
what the author thought, and "luckily", most in-tree targets have SETCC with
Custom lowering, instead of marking them Legal, so these checks return false
anyway.
The second problem being fixed here is that two of the DAGCombines could create
SETCC nodes with arbitrary (integer) value types; specifically, those that
would simplify:
(setcc a, b, op1) and|or (setcc a, b, op2) -> setcc a, b, op3
(which is possible for some combinations of (op1, op2))
If the operands of the and|or node are actual setcc nodes, then this is not an
issue (because the and|or must share the same type), but, the relevant code in
DAGCombiner::visitANDLike and DAGCombiner::visitORLike actually calls
DAGCombiner::isSetCCEquivalent on each operand, and that function will
recognise setcc-like select_cc nodes with other return types. And, thus, when
creating new SETCC nodes, we need to be careful to respect the value-type
constraint. This is even true before type legalization, because it is quite
possible for the SELECT_CC node to have a legal type that does not happen to
match the corresponding TLI.getSetCCResultType type.
To be explicit, there is nothing that later fixes the value types of SETCC
nodes (if the type is legal, but does not happen to match
TLI.getSetCCResultType). Creating SETCCs with an MVT::i1 value type seems to
work only because, either MVT::i1 is not legal, or it is what
TLI.getSetCCResultType returns if it is legal. Fixing that is a larger change,
however. For the time being, restrict the relevant transformations to produce
only SETCC nodes with a value type matching TLI.getSetCCResultType (or MVT::i1
prior to type legalization).
Fixes PR24636.
llvm-svn: 280767
Unlike PPC64, PPC32/SVRV4 does not have red zone. In the absence of it
there is no guarantee that this part of the stack will not be modified
by any interrupt. To avoid this, make sure to claim the stack frame first
before storing into it.
This fixes https://llvm.org/bugs/show_bug.cgi?id=26519.
Differential Revision: https://reviews.llvm.org/D24093
llvm-svn: 280705
As it turns out, whether we zero-extend or sign-extend i8/i16 constants, which
are illegal types promoted to i32 on PowerPC, is a choice constrained by
assumptions within the infrastructure. Specifically, the logic in
FunctionLoweringInfo::ComputePHILiveOutRegInfo assumes that constant PHI
operands will be zero extended, and so, at least when materializing constants
that are PHI operands, we must do the same.
The rest of our fast-isel implementation does not appear to depend on the fact
that we were sign-extending i8/i16 constants, and all other targets also appear
to zero-extend small-bitwidth constants in fast-isel; we'll now do the same (we
had been doing this only for i1 constants, and sign-extending the others).
Fixes PR27721.
llvm-svn: 280614
When we have an offset into a global, etc. that is accessed relative to the TOC
base pointer, and the offset is larger than the minimum alignment of the global
itself and the TOC base pointer (which is 8-byte aligned), we can still fold
the @toc@ha into the memory access, but we must update the addis instruction's
symbol reference with the offset as the symbol addend. When there is only one
use of the addi to be folded and only one use of the addis that would need its
symbol's offset adjusted, then we can make the adjustment and fold the @toc@l
into the memory access.
llvm-svn: 280545
As Sanjay suggested when he added the hook, PPC should return true from
hasAndNotCompare. We have an efficient negated 'and' on PPC (which can feed a
compare).
Fixes PR27203.
llvm-svn: 280457
Following a suggestion by Sanjay, we should lower:
%shl = shl i32 1, %y
%and = and i32 %x, %shl
%cmp = icmp eq i32 %and, %shl
ret i1 %cmp
into:
subfic r4, r4, 32
rlwnm r3, r3, r4, 31, 31
Add this pattern and some associated patterns for the 64-bit case and the
not-equal case. Fixes PR27356.
llvm-svn: 280454
When applying our address-formation PPC64 peephole, we are reusing the @ha TOC
addis value with the low parts associated with different offsets (i.e.
different effective symbol addends). We were assuming this was okay so long as
the offsets were less than the alignment of the global variable being accessed.
This ignored the fact, however, that the TOC base pointer itself need only be
8-byte aligned. As a result, what we were doing is legal only for offsets less
than 8 regardless of the alignment of the object being accessed.
Fixes PR28727.
llvm-svn: 280441
The logic in this function assumes that the P8 supports fusion of addis/addi,
but it does not. As a result, there is no advantage to restricting our peephole
application, merging addi instructions into dependent memory accesses, even
when the addi has multiple users, regardless of whether or not we're optimizing
for size.
We might need something like this again for the P9; I suspect we'll revisit
this code when we work on P9 tuning.
llvm-svn: 280440
LLVM has an @llvm.eh.dwarf.cfa intrinsic, used to lower the GCC-compatible
__builtin_dwarf_cfa() builtin. As pointed out in PR26761, this is currently
broken on PowerPC (and likely on ARM as well). Currently, @llvm.eh.dwarf.cfa is
lowered using:
ADD(FRAMEADDR, FRAME_TO_ARGS_OFFSET)
where FRAME_TO_ARGS_OFFSET defaults to the constant zero. On x86,
FRAME_TO_ARGS_OFFSET is lowered to 2*SlotSize. This setup, however, does not
work for PowerPC. Because of the way that the stack layout works, the canonical
frame address is not exactly (FRAMEADDR + FRAME_TO_ARGS_OFFSET) on PowerPC
(there is a lower save-area offset as well), so it is not just a matter of
implementing FRAME_TO_ARGS_OFFSET for PowerPC (unless we redefine its
semantics -- We can do that, since it is currently used only for
@llvm.eh.dwarf.cfa lowering, but the better to directly lower the CFA construct
itself (since it can be easily represented as a fixed-offset FrameIndex)). Mips
currently does this, but by using a custom lowering for ADD that specifically
recognizes the (FRAMEADDR, FRAME_TO_ARGS_OFFSET) pattern.
This change introduces a ISD::EH_DWARF_CFA node, which by default expands using
the existing logic, but can be directly lowered by the target. Mips is updated
to use this method (which simplifies its implementation, and I suspect makes it
more robust), and updates PowerPC to do the same.
Fixes PR26761.
Differential Revision: https://reviews.llvm.org/D24038
llvm-svn: 280350
As discussed in https://reviews.llvm.org/D22666, our current mechanism to
support -pg profiling, where we insert calls to mcount(), or some similar
function, is fundamentally broken. We insert these calls in the frontend, which
means they get duplicated when inlining, and so the accumulated execution
counts for the inlined-into functions are wrong.
Because we don't want the presence of these functions to affect optimizaton,
they should be inserted in the backend. Here's a pass which would do just that.
The knowledge of the name of the counting function lives in the frontend, so
we're passing it here as a function attribute. Clang will be updated to use
this mechanism.
Differential Revision: https://reviews.llvm.org/D22825
llvm-svn: 280347
When a function contains something, such as inline asm, which explicitly
clobbers the register used as the frame pointer, don't spill it twice. If we
need a frame pointer, it will be saved/restored in the prologue/epilogue code.
Explicitly spilling it again will reuse the same spill slot used by the
prologue/epilogue code, thus clobbering the saved value. The same applies
to the base-pointer or PIC-base register.
Partially fixes PR26856. Thanks to Ulrich for his analysis and the small
inline-asm reproducer.
llvm-svn: 280188
Implement Bill's suggested fix for 32-bit targets for PR22711 (for the
alignment of each entry). As pointed out in the bug report, we could just force
the section alignment, since we only add pointer-sized things currently, but
this fix is somewhat more future-proof.
llvm-svn: 280049
The "long call" option forces the use of the indirect calling sequence for all
calls (even those that don't really need it). GCC provides this option; This is
helpful, under certain circumstances, for building very-large binaries, and
some other specialized use cases.
Fixes PR19098.
llvm-svn: 280040
For little-Endian PowerPC, we generally target only P8 and later by default.
However, generic (older) 64-bit configurations are still an option, and in that
case, partword atomics are not available (e.g. stbcx.). To lower i8/i16 atomics
without true i8/i16 atomic operations, we emulate using i32 atomics in
combination with a bunch of shifting and masking, etc. The amount by which to
shift in little-Endian mode is different from the amount in big-Endian mode (it
is inverted -- meaning we can leave off the xor when computing the amount).
Fixes PR22923.
llvm-svn: 280022
Rename AllVRegsAllocated to NoVRegs. This avoids the connotation of
running after register and simply describes that no vregs are used in
a machine function. With that we can simply compute the property and do
not need to dump/parse it in .mir files.
Differential Revision: http://reviews.llvm.org/D23850
llvm-svn: 279698
tracksSubRegLiveness only depends on the Subtarget and a cl::opt, there
is not need to change it or save/parse it in a .mir file.
Make the field const and move the initialization LiveIntervalAnalysis to the
MachineRegisterInfo constructor. Also cleanup some code and fix some
instances which better use MachineRegisterInfo::subRegLivenessEnabled() instead
of TargetSubtargetInfo::enableSubRegLiveness().
llvm-svn: 279676
Specifying isSSA is an extra line at best and results in invalid MI at
worst. Compute the value instead.
Differential Revision: http://reviews.llvm.org/D22722
llvm-svn: 279600
The ppc64 multistage bot fails on this.
This reverts commit r279124.
Also Revert "CodeGen: Add/Factor out LiveRegUnits class; NFCI" because it depends on the previous change
This reverts commit r279171.
llvm-svn: 279199
The following function currently relies on tail-merging for if
conversion to succeed. The common tail of cond_true and cond_false is
extracted, and this then forms a diamond pattern that can be
successfully if converted.
If this block does not get extracted, either because tail-merging is
disabled or the threshold is higher, we should still recognize this
pattern and if-convert it.
Fixed a regression in the original commit. Need to un-reverse branches after
reversing them, or other conversions go awry.
Regression on self-hosting bots with no obvious explanation. Tidied up range
handling to be more obviously correct, but there was no smoking gun.
define i32 @t2(i32 %a, i32 %b) nounwind {
entry:
%tmp1434 = icmp eq i32 %a, %b ; <i1> [#uses=1]
br i1 %tmp1434, label %bb17, label %bb.outer
bb.outer: ; preds = %cond_false, %entry
%b_addr.021.0.ph = phi i32 [ %b, %entry ], [ %tmp10, %cond_false ]
%a_addr.026.0.ph = phi i32 [ %a, %entry ], [ %a_addr.026.0, %cond_false ]
br label %bb
bb: ; preds = %cond_true, %bb.outer
%indvar = phi i32 [ 0, %bb.outer ], [ %indvar.next, %cond_true ]
%tmp. = sub i32 0, %b_addr.021.0.ph
%tmp.40 = mul i32 %indvar, %tmp.
%a_addr.026.0 = add i32 %tmp.40, %a_addr.026.0.ph
%tmp3 = icmp sgt i32 %a_addr.026.0, %b_addr.021.0.ph
br i1 %tmp3, label %cond_true, label %cond_false
cond_true: ; preds = %bb
%tmp7 = sub i32 %a_addr.026.0, %b_addr.021.0.ph
%tmp1437 = icmp eq i32 %tmp7, %b_addr.021.0.ph
%indvar.next = add i32 %indvar, 1
br i1 %tmp1437, label %bb17, label %bb
cond_false: ; preds = %bb
%tmp10 = sub i32 %b_addr.021.0.ph, %a_addr.026.0
%tmp14 = icmp eq i32 %a_addr.026.0, %tmp10
br i1 %tmp14, label %bb17, label %bb.outer
bb17: ; preds = %cond_false, %cond_true, %entry
%a_addr.026.1 = phi i32 [ %a, %entry ], [ %tmp7, %cond_true ], [ %a_addr.026.0, %cond_false ]
ret i32 %a_addr.026.1
}
Without tail-merging or diamond-tail if conversion:
LBB1_1: @ %bb
@ =>This Inner Loop Header: Depth=1
cmp r0, r1
ble LBB1_3
@ BB#2: @ %cond_true
@ in Loop: Header=BB1_1 Depth=1
subs r0, r0, r1
cmp r1, r0
it ne
cmpne r0, r1
bgt LBB1_4
LBB1_3: @ %cond_false
@ in Loop: Header=BB1_1 Depth=1
subs r1, r1, r0
cmp r1, r0
bne LBB1_1
LBB1_4: @ %bb17
bx lr
With diamond-tail if conversion, but without tail-merging:
@ BB#0: @ %entry
cmp r0, r1
it eq
bxeq lr
LBB1_1: @ %bb
@ =>This Inner Loop Header: Depth=1
cmp r0, r1
ite le
suble r1, r1, r0
subgt r0, r0, r1
cmp r1, r0
bne LBB1_1
@ BB#2: @ %bb17
bx lr
llvm-svn: 279168
Re-apply r276044 with off-by-1 instruction fix for the reload placement.
This is a variant of scavengeRegister() that works for
enterBasicBlockEnd()/backward(). The benefit of the backward mode is
that it is not affected by incomplete kill flags.
This patch also changes
PrologEpilogInserter::doScavengeFrameVirtualRegs() to use the register
scavenger in backwards mode.
Differential Revision: http://reviews.llvm.org/D21885
llvm-svn: 279124
This is a quick work around, because in some cases, e.g. caller's stack
size > callee's stack size, we are still able to apply sibling call
optimization even callee has any byval arg.
This patch fix: https://llvm.org/bugs/show_bug.cgi?id=28328
Reviewers: hfinkel kbarton nemanjai amehsan
Subscribers: hans, tjablin
https://reviews.llvm.org/D23441
llvm-svn: 278900
Matthias Braun