In verbose mode, we emit a warning if the DWOId of a skeleton CU
mismatches the DWOId of the referenced module. This patch updates the
cached DWOId after a module has been loaded to the DWOId of the module
on disk (instead of storing the DWOId we expected to load). This
allows us to correctly emit the mismatch warning for all subsequent
object files that want to import the same module. This patch also
ensures both warnings are only emitted in verbose mode.
rdar://problem/26214027
llvm-svn: 269383
The BinaryHolder would query the archive member MemoryBuffer name
to check if the current open archive also contains the next requested
objectfile. This comparison was using a StringRef to a temporary
buffer. It only happened with fat archives. This commit adds long-lived
storage along with the MemoryBuffers for the fat archive filename.
The added test would fail during an ASAN build without the fix.
llvm-svn: 268924
r267249 removed the dual ARM/Thumb interface from MachOObjectFile,
simplifying llvm-dsymutil's code. This unfortunately also regressed
llvm-dsymutil's ability to select thumb slices, because the simplified
code was also dealing with the discrepency between the slice arch
(eg. armv7m) and the triple arch name (eg. thumbv7m).
llvm-svn: 268894
llvm-dsymutil used to create the temporary files in the output directory.
This works fine except when the output directory contains a '%' char, which
is then replaced by llvm::sys::fs::createUniqueFile() generating an invalid
path.
Just use the default temp dir for those files.
llvm-svn: 268304
Produce another specific error message for a malformed Mach-O file when a symbol’s
section index is more than the number of sections. The existing test case in test/Object/macho-invalid.test
for macho-invalid-section-index-getSectionRawName now reports the error with the message indicating
that a symbol at a specific index has a bad section index and that bad section index value.
Again converting interfaces to Expected<> from ErrorOr<> does involve
touching a number of places. Where the existing code reported the error with a
string message or an error code it was converted to do the same.
Also there some were bugs in the existing code that did not deal with the
old ErrorOr<> return values. So now with Expected<> since they must be
checked and the error handled, I added a TODO and a comment:
"// TODO: Actually report errors helpfully" and a call something like
consumeError(NameOrErr.takeError()) so the buggy code will not crash
since needed to deal with the Error.
llvm-svn: 268298
Until PR27449 (https://llvm.org/bugs/show_bug.cgi?id=27449) is fixed in
clang this warning is pointless, since ASTFileSignatures will change
randomly when a module is rebuilt.
rdar://problem/25610919
llvm-svn: 267427
Only one consumer (llvm-objdump) actually cared about the fact that there were
two triples. Others were actively working around the fact that the Triple
returned by getArch might have been invalid. As for llvm-objdump, it needs to
be acutely aware of both Triples anyway, so being generic in the exposed API is
no benefit.
Also rename the version of getArch returning a Triple. Users were having to
pass an unwanted nullptr to disambiguate the two, which was nasty.
The only functional change here is that armv7m and armv7em object files no
longer crash llvm-objdump.
llvm-svn: 267249
Produce another specific error message for a malformed Mach-O file when a symbol’s
string index is past the end of the string table. The existing test case in test/Object/macho-invalid.test
for macho-invalid-symbol-name-past-eof now reports the error with the message indicating
that a symbol at a specific index has a bad sting index and that bad string index value.
Again converting interfaces to Expected<> from ErrorOr<> does involve
touching a number of places. Where the existing code reported the error with a
string message or an error code it was converted to do the same. There is some
code for this that could be factored into a routine but I would like to leave that for
the code owners post-commit to do as they want for handling an llvm::Error. An
example of how this could be done is shown in the diff in
lib/ExecutionEngine/RuntimeDyld/RuntimeDyldImpl.h which had a Check() routine
already for std::error_code so I added one like it for llvm::Error .
Also there some were bugs in the existing code that did not deal with the
old ErrorOr<> return values. So now with Expected<> since they must be
checked and the error handled, I added a TODO and a comment:
“// TODO: Actually report errors helpfully” and a call something like
consumeError(NameOrErr.takeError()) so the buggy code will not crash
since needed to deal with the Error.
Note there fixes needed to lld that goes along with this that I will commit right after this.
So expect lld not to built after this commit and before the next one.
llvm-svn: 266919
Produce the first specific error message for a malformed Mach-O file describing
the problem instead of the generic message for object_error::parse_failed of
"Invalid data was encountered while parsing the file”. Many more good error
messages will follow after this first one.
This is built on Lang Hames’ great work of adding the ’Error' class for
structured error handling and threading Error through MachOObjectFile
construction. And making createMachOObjectFile return Expected<...> .
So to to get the error to the llvm-obdump tool, I changed the stack of
these methods to also return Expected<...> :
object::ObjectFile::createObjectFile()
object::SymbolicFile::createSymbolicFile()
object::createBinary()
Then finally in ParseInputMachO() in MachODump.cpp the error can
be reported and the specific error message can be printed in llvm-objdump
and can be seen in the existing test case for the existing malformed binary
but with the updated error message.
Converting these interfaces to Expected<> from ErrorOr<> does involve
touching a number of places. To contain the changes for now use of
errorToErrorCode() and errorOrToExpected() are used where the callers
are yet to be converted.
Also there some were bugs in the existing code that did not deal with the
old ErrorOr<> return values. So now with Expected<> since they must be
checked and the error handled, I added a TODO and a comment:
“// TODO: Actually report errors helpfully” and a call something like
consumeError(ObjOrErr.takeError()) so the buggy code will not crash
since needed to deal with the Error.
Note there is one fix also needed to lld/COFF/InputFiles.cpp that goes along
with this that I will commit right after this. So expect lld not to built
after this commit and before the next one.
llvm-svn: 265606
in the test suite. While this is not really an interesting tool and option to run
on a Mach-O file to show the symbol table in a generic libObject format
it shouldn’t crash.
The reason for the crash was in MachOObjectFile::getSymbolType() when it was
calling MachOObjectFile::getSymbolSection() without checking its return value
for the error case.
What makes this fix require a fair bit of diffs is that the method getSymbolType() is
in the class ObjectFile defined without an ErrorOr<> so I needed to add that all
the sub classes. And all of the uses needed to be updated and the return value
needed to be checked for the error case.
The MachOObjectFile version of getSymbolType() “can” get an error in trying to
come up with the libObject’s internal SymbolRef::Type when the Mach-O symbol
symbol type is an N_SECT type because the code is trying to select from the
SymbolRef::ST_Data or SymbolRef::ST_Function values for the SymbolRef::Type.
And it needs the Mach-O section to use isData() and isBSS to determine if
it will return SymbolRef::ST_Data.
One other possible fix I considered is to simply return SymbolRef::ST_Other
when MachOObjectFile::getSymbolSection() returned an error. But since in
the past when I did such changes that “ate an error in the libObject code” I
was asked instead to push the error out of the libObject code I chose not
to implement the fix this way.
As currently written both the COFF and ELF versions of getSymbolType()
can’t get an error. But if isReservedSectionNumber() wanted to check for
the two known negative values rather than allowing all negative values or
the code wanted to add the same check as in getSymbolAddress() to use
getSection() and check for the error then these versions of getSymbolType()
could return errors.
At the end of the day the error printed now is the generic “Invalid data was
encountered while parsing the file” for object_error::parse_failed. In the
future when we thread Lang’s new TypedError for recoverable error handling
though libObject this will improve. And where the added // Diagnostic(…
comment is, it would be changed to produce and error message
like “bad section index (42) for symbol at index 8” for this case.
llvm-svn: 264187
Now that the resolved path cache stores the StringRef's, its
best to just always cache the results, even when realpath isn't
used. This way we'll still avoid the StringMap hashing and lookup.
This also conveniently reorganises this code in a way I need for
a future patch.
llvm-svn: 263777
ResolvedPaths was storing std::string's as a cache. We would then take those strings and look them up in the internString pool to get a unique StringRef for each path.
This patch changes ResolvedPaths to store the StringRef pointing in to the internString pool itself. This way, when getResolvedPath returns a string, we know we have the StringRef we would find in the pool anyway. We can avoid the duplicate memory of the std::string's, and also the time from the lookup.
Unfortunately my profiles show no runtime change here, but it should still save memory allocations which is nice.
Reviewed by Frederic Riss.
Differential Revision: http://reviews.llvm.org/D18259
llvm-svn: 263774
Noticed while working on scattered relocations.
I do not think these relocs can actually happen in the debug_info section,
but if they happen the code would mishandle them. Explicitely skip them
and warn if we encounter one.
llvm-svn: 259341
Although it seems like clang will never emit scattered relocations in
the debug information (at least I couldn't find a way), we have too
support them for the benefit of other compilers.
As clang doesn't generate them, the included testcase was produced
from hacked up assembly.
llvm-svn: 259339
llvm-dsymutil was misinterpreting the value of common symbols as their
address when it actually contains their size. This didn't impact
llvm-dsymutil's ability to link the debug information for common symbols
because these are always found by name and not by address. Things could
however go wrong when the size of a common object matched the object
file address of another symbol. Depending on the link order of the symbols
the common object might incorrectly evict this other object from the
address to symbol mapping, and then link the evicted symbol with a wrong
binary address.
Use the new ability to have symbols without an object file address to fix
this.
llvm-svn: 259318
This change just changes the data structure that ties symbol names,
object file address and linked binary addresses to accept mappings
with no object file address. Such symbol mappings are not fed into
the debug map yet, so this patch is NFC.
A subsequent patch will make use of this functionality for common
symbols.
llvm-svn: 259317
Summary:
This patch is provided in preparation for removing autoconf on 1/26. The proposal to remove autoconf on 1/26 was discussed on the llvm-dev thread here: http://lists.llvm.org/pipermail/llvm-dev/2016-January/093875.html
"I felt a great disturbance in the [build system], as if millions of [makefiles] suddenly cried out in terror and were suddenly silenced. I fear something [amazing] has happened."
- Obi Wan Kenobi
Reviewers: chandlerc, grosbach, bob.wilson, tstellarAMD, echristo, whitequark
Subscribers: chfast, simoncook, emaste, jholewinski, tberghammer, jfb, danalbert, srhines, arsenm, dschuff, jyknight, dsanders, joker.eph, llvm-commits
Differential Revision: http://reviews.llvm.org/D16471
llvm-svn: 258861
Today, we always take into account the possibility that object files
produced by MC may be consumed by an incremental linker. This results
in us initialing fields which vary with time (TimeDateStamp) which harms
hermetic builds (e.g. verifying a self-host went well) and produces
sub-optimal code because we cannot assume anything about the relative
position of functions within a section (call sites can get redirected
through incremental linker thunks).
Let's provide an MCTargetOption which controls this behavior so that we
can disable this functionality if we know a-priori that the build will
not rely on /incremental.
llvm-svn: 256203
Quoting from the comment added to the code:
// Objective-C on i386 uses artificial absolute symbols to
// perform some link time checks. Those symbols have a fixed 0
// address that might conflict with real symbols in the object
// file. As I cannot see a way for absolute symbols to find
// their way into the debug information, let's just ignore those.
llvm-svn: 255350
While still allowing CodeGen/AsmPrinter in llvm to own them using a bump
ptr allocator. (might be nice to replace the pointers there with
something that at least automatically calls their dtors, if that's
necessary/useful, rather than having it done explicitly (I think a typed
BumpPtrAllocator already does this, or maybe a unique_ptr with a custom
deleter, etc))
llvm-svn: 253409
already emitted and fix a latent bug in DIECloner where the DW_CHILDREN_yes
flag is set based on the number of children in the input DIE rather than
the number of children that are actually being cloned.
rdar://problem/23439845
llvm-svn: 252649
The needed lld matching changes to be submitted immediately next,
but this revision will cause lld failures with this alone which is expected.
This removes the eating of the error in Archive::Child::getSize() when the characters
in the size field in the archive header for the member is not a number. To do this we
have all of the needed methods return ErrorOr to push them up until we get out of lib.
Then the tools and can handle the error in whatever way is appropriate for that tool.
So the solution is to plumb all the ErrorOr stuff through everything that touches archives.
This include its iterators as one can create an Archive object but the first or any other
Child object may fail to be created due to a bad size field in its header.
Thanks to Lang Hames on the changes making child_iterator contain an
ErrorOr<Child> instead of a Child and the needed changes to ErrorOr.h to add
operator overloading for * and -> .
We don’t want to use llvm_unreachable() as it calls abort() and is produces a “crash”
and using report_fatal_error() to move the error checking will cause the program to
stop, neither of which are really correct in library code. There are still some uses of
these that should be cleaned up in this library code for other than the size field.
The test cases use archives with text files so one can see the non-digit character,
in this case a ‘%’, in the size field.
These changes will require corresponding changes to the lld project. That will be
committed immediately after this change. But this revision will cause lld failures
with this alone which is expected.
llvm-svn: 252192
in the size field in the archive header for the member is not a number. To do this we
have all of the needed methods return ErrorOr to push them up until we get out of lib.
Then the tools and can handle the error in whatever way is appropriate for that tool.
So the solution is to plumb all the ErrorOr stuff through everything that touches archives.
This include its iterators as one can create an Archive object but the first or any other
Child object may fail to be created due to a bad size field in its header.
Thanks to Lang Hames on the changes making child_iterator contain an
ErrorOr<Child> instead of a Child and the needed changes to ErrorOr.h to add
operator overloading for * and -> .
We don’t want to use llvm_unreachable() as it calls abort() and is produces a “crash”
and using report_fatal_error() to move the error checking will cause the program to
stop, neither of which are really correct in library code. There are still some uses of
these that should be cleaned up in this library code for other than the size field.
Also corrected the code where the size gets us to the “at the end of the archive”
which is OK but past the end of the archive will return object_error::parse_failed now.
The test cases use archives with text files so one can see the non-digit character,
in this case a ‘%’, in the size field.
llvm-svn: 250906
Even if we don't have it in PATH, lipo should usually exist in the same directory
as dsymutil. Keep the fallback looking up the PATH, it's very useful when
testing a non-installed executable.
llvm-svn: 249762
if there exists not definition for the type.
For this to work, we need to clone the imported modules before building
the decl context chains of the DIEs in the non-skeleton CUs.
llvm-svn: 249362
This patch extends llvm-dsymutil's ODR type uniquing machinery to also
resolve forward decls for types defined in clang modules.
http://reviews.llvm.org/D13038
llvm-svn: 248398
Summary:
This is the first patch in the series to migrate Triple's (which are ambiguous)
to TargetTuple's (which aren't).
For the moment, TargetTuple simply passes all requests to the Triple object it
holds. Once it has replaced Triple, it will start to implement the interface in
a more suitable way.
This change makes some changes to the public C++ API. In particular,
InitMCSubtargetInfo(), createMCRelocationInfo(), and createMCSymbolizer()
now take TargetTuples instead of Triples. The other public C++ API's have
been left as-is for the moment to reduce patch size.
This commit also contains a trivial patch to clang to account for the C++ API
change. Thanks go to Pavel Labath for fixing LLDB for me.
Reviewers: rengolin
Subscribers: jyknight, dschuff, arsenm, rampitec, danalbert, srhines, javed.absar, dsanders, echristo, emaste, jholewinski, tberghammer, ted, jfb, llvm-commits, rengolin
Differential Revision: http://reviews.llvm.org/D10969
llvm-svn: 247692
Summary:
This is the first patch in the series to migrate Triple's (which are ambiguous)
to TargetTuple's (which aren't).
For the moment, TargetTuple simply passes all requests to the Triple object it
holds. Once it has replaced Triple, it will start to implement the interface in
a more suitable way.
This change makes some changes to the public C++ API. In particular,
InitMCSubtargetInfo(), createMCRelocationInfo(), and createMCSymbolizer()
now take TargetTuples instead of Triples. The other public C++ API's have
been left as-is for the moment to reduce patch size.
This commit also contains a trivial patch to clang to account for the C++ API
change.
Reviewers: rengolin
Subscribers: jyknight, dschuff, arsenm, rampitec, danalbert, srhines, javed.absar, dsanders, echristo, emaste, jholewinski, tberghammer, ted, jfb, llvm-commits, rengolin
Differential Revision: http://reviews.llvm.org/D10969
llvm-svn: 247683
When cloning the debug info for a function that hasn't been linked,
strip the DIEs from all location attributes that wouldn't contain any
meaningful information anyway.
This kind of situation can happen when a function got discarded by the
linker, but its debug information is still wanted in the final link
because it was marked as required as some other DIE dependency. The easiest
way to get into that situation is to have using directives. They get
linked unconditionally, but their targets might not always be present.
llvm-svn: 247386
lldb doesn't like having variables named as an existing type. In order to
ease debugging, rename those variables to avoid that conflict.
llvm-svn: 247385
With a fix for big endian machines. Thanks to Daniel Sanders for the debugging!
Original commit message:
The binaries containing the linked DWARF generated by dsymutil are not
standard relocatable object files like emitted did previsously. They should be
dSYM companion files, which means they have a different file type in the
header, but also a couple other peculiarities:
- they contain the segments and sections from the original binary in their
load commands, but not the actual contents. This means they get an address
and a size, but their offset is always 0 (but these are not virtual sections)
- they also conatin all the defined symbols from the original binary
This makes MC a really bad fit to emit these kind of binaries. The approach
that was used in this patch is to leverage MC's section layout for the
debug sections, but to use a replacement for MachObjectWriter that lives
in MachOUtils.cpp. Some of the low-level helpers from MachObjectWriter
were reused too.
llvm-svn: 246673
The fix is trivial (The actual patch is 2 lines, but as it changes
indentation it looks like more).
clang does not produce this kind of (slightly bogus) debug info
anymore, thus I had to rely on a hand-crafted assembly test to trigger
that case.
llvm-svn: 246410
The value of an inlined subprogram low_pc attribute should not
get relocated, but it can happen that it matches the enclosing
function's start address and thus gets the generic treatment.
Special case it to avoid applying the PC offset twice.
llvm-svn: 246406
The binaries containing the linked DWARF generated by dsymutil are not
standard relocatable object files like emitted did previsously. They should be
dSYM companion files, which means they have a different file type in the
header, but also a couple other peculiarities:
- they contain the segments and sections from the original binary in their
load commands, but not the actual contents. This means they get an address
and a size, but their offset is always 0 (but these are not virtual sections)
- they also conatin all the defined symbols from the original binary
This makes MC a really bad fit to emit these kind of binaries. The approach
that was used in this patch is to leverage MC's section layout for the
debug sections, but to use a replacement for MachObjectWriter that lives
in MachOUtils.cpp. Some of the low-level helpers from MachObjectWriter
were reused too.
llvm-svn: 246012
llvm-dsymutil needs to emit dSYM companion bundles. These are binary files
that replicate some of the orignal binary file properties (sections and
symbols). To get acces to these properties, pass the binary path in the
debug map.
llvm-svn: 246011
There was an issue in the test setup because the test requires an arch that
wasn't filtered by the lit.local.cfg, but given the set of bots that failed,
I'm not confident this is the (only) issue. So this commit also adds more
output to the test to help me track down the failure if it happens again.
Original commit message:
[dsymutil] Rewrite thumb triple names in user visible messages.
We autodetect triples from the input file(s) while reading the mach-o debug map.
As we need to create a Target from those triples, we always chose the thumb
variant (because the arm variant might not be 'instantiable' eg armv7m). The
user visible architecture names should still be 'arm' and not 'thumb' variants
though.
llvm-svn: 245988
This reverts commit r245960.
Multiple bots are failing on the new test. It seemd like llvm-dsymutil exits with an error. Investigating.
llvm-svn: 245964
We autodetect triples from the input file(s) while reading the mach-o debug map.
As we need to create a Target from those triples, we always chose the thumb
variant (because the arm variant might not be 'instantiable' eg armv7m). The
user visible architecture names should still be 'arm' and not 'thumb' variants
though.
llvm-svn: 245960
Seq.emplace_back(Seq.back());
does not work as planned, since Seq.back() may become a dangling reference
when emplace_back is called and possibly reallocates vector. To avoid this,
the vector allocation should be reserved first and only then used.
This broke test/tools/dsymutil/X86/custom-line-table.test with Visual C++ 2013.
llvm-svn: 244405
llvm-dsymutil has to be able to process debug info produced by other compilers
which use different line table settings. The testcase wasn't generated by
another compiler, but by a modified clang.
llvm-svn: 244319
A dSYM bundle is a file hierarchy that looks slike this:
<bundle name>.dSYM/
Contents/
Info.plist
Resources/
DWARF/
<DWARF file(s)>
This is the default output mode of dsymutil.
llvm-svn: 244270
dsymutil should by default generate dSYM bundles which are filesystem
hierarchies containing the debug info and an additional Info.plist.
Currently llvm-dsymutil emits raw binaries containing the debug info.
This is what we call the 'flat mode'. Add a -f/-flat option that is
supposed to enable that flat mode, but don't wire it for now, only
pass it to the tests that will need it to stay functional once we
do bundle generation by default.
This basically makes this commit NFC and removes the noise from the
actual commit that adds support for bundle generation.
llvm-svn: 244269
The files were never written to and then deleted, but they were created
nonetheless. To prevent that, create a wrapper around the 2 variants of
createUniqueFile and use the one that only does an access(Exists) call
to check for name unicity in -no-output mode.
llvm-svn: 244172
This option allows to select a subset of the architectures when
performing a universal binary link. The filter is done completely
in the mach-o specific part of the code.
llvm-svn: 244160
The DWARF linker isn't touched by this, the implementation links
individual files and merges them together into a fat binary by
calling out to the 'lipo' utility.
The main change is that the MachODebugMapParser can now return
multiple debug maps for a single binary.
The test just verifies that lipo would be invoked correctly, but
doesn't actually generate a binary. This mimics the way clang
tests its external iplatform tools integration.
llvm-svn: 244087
llvm-dsymutil will start creating temporary files in a followup
commit. To ease the correct cleanup of this files, introduce a
helper called to exit dsymutil.
llvm-svn: 244086
Prevent all the unrelated LLVM options to appear in the -help output
by introducing a tool specific option category. As a drive-by improve
the wording of the help message.
llvm-svn: 243583
The dsymutil-classic -v option dumps the tool version rather than
putting it in verbose mode. Rename -v to -verbose and update the
tests that use it (in the process removing it from a few tests that
didn't require it anymore since the -dump-debug-map option was
introduced).
A followup commit will reintroduce the -v option that dumps the
version.
llvm-svn: 243582
This patch allows llvm-dsymutil to read universal (aka fat) macho object
files and archives. The patch touches nearly everything in the BinaryHolder,
but it is fairly mechinical: the methods that returned MemoryBufferRefs or
ObjectFiles now return a vector of those, and the high-level access function
takes a triple argument to select the architecture.
There is no support yet for handling fat executables and thus no support for
writing fat object files.
llvm-svn: 243096
MachOObjectFile offers a method for detecting the correct triple, use
it instead of the previous approximation. This doesn't matter right
now, but it will become important for mach-o universal (fat) binaries.
llvm-svn: 243095
Call a helper that resets all the internal state of the BinaryHolder
when we change the underlying memory buffer. Makes a followup patch
a tiny bit smaller.
llvm-svn: 243094
The debug map contains the timestamp of the object files in references.
We do not check these in the general case, but it's really useful if
you have archives where different versions of an object file have been
appended. This allows llvm-dsymutil to find the right one.
llvm-svn: 242965
This optimization allows the DWARF linker to reuse definition of
types it has emitted in previous CUs rather than reemitting them
in each CU that references them. The size and link time gains are
huge. For example when linking the DWARF for a debug build of
clang, this generates a ~150M dwarf file instead of a ~700M one
(the numbers date back a bit and must not be totally accurate
these days).
As with all the other parts of the llvm-dsymutil codebase, the
goal is to keep bit-for-bit compatibility with dsymutil-classic.
The code is littered with a lot of FIXMEs that should be
addressed once we can get rid of the compatibilty goal.
llvm-svn: 242847
getSymbolValue now returns a value that in convenient for most callers:
* 0 for undefined
* symbol size for common symbols
* offset/address for symbols the rest
Code that needs something more specific can check getSymbolFlags.
llvm-svn: 241605
At least not in the interface exposed by ObjectFile. This matches what ELF and
COFF implement.
Adjust existing code that was expecting them to have values. No overall
functionality change intended.
Another option would be to change the interface and the ELF and COFF
implementations to say that the value of a common symbol is its size.
llvm-svn: 241593
This function can really fail since the string table offset can be out of
bounds.
Using ErrorOr makes sure the error is checked.
Hopefully a lot of the boilerplate code in tools/* can go away once we have
a diagnostic manager in Object.
llvm-svn: 241297
This is still a really odd function. Most calls are in object format specific
contexts and should probably be replaced with a more direct query, but at least
now this is not too obnoxious to use.
llvm-svn: 240777
Replace the `std::vector<>` for `DIE::Children` with an intrusively
linked list. This is a strict memory improvement: it requires no
auxiliary storage, and reduces `sizeof(DIE)` by one pointer. It also
factors out the DIE-related malloc traffic.
This drops llc memory usage from 735 MB down to 718 MB, or ~2.3%.
(I'm looking at `llc` memory usage on `verify-uselistorder.lto.opt.bc`;
see r236629 for details.)
llvm-svn: 240736
Change `DIE::Values` to a singly linked list, where each node is
allocated on a `BumpPtrAllocator`. In order to support `push_back()`,
the list is circular, and points at the tail element instead of the
head. I abstracted the core list logic out to `IntrusiveBackList` so
that it can be reused for `DIE::Children`, which also cares about
`push_back()`.
This drops llc memory usage from 799 MB down to 735 MB, about 8%.
(I'm looking at `llc` memory usage on `verify-uselistorder.lto.opt.bc`;
see r236629 for details.)
llvm-svn: 240733
Split out code to patch up the `DW_AT_stmt_list` for the cloned DIE, and
reorganize it so that it doesn't depend on `DIE::values_begin()` and
`DIE::values_end()` (which I'm trying to kill off).
David Blaikie and I talked about adding a range-algorithm version of
`std::find_if()`, but the assertion *still* required getting at the end
iterator. IMO, a separate helper function with an early return is
easier to reason about here.
A follow-up commit that removes `DIE::setValue()` and mutates the
`DIEValue` directly is coming shortly.
llvm-svn: 240701
COFF and MachO only define symbol sizes for common symbols. Reflect that
in the class hierarchy by having a method for common symbols only in the base
and a general one in ELF.
This avoids the need of using a magic value for the size, which had a few
problems
* Most callers didn't check for it.
* The ones that did could not tell the magic value from a file actually having
that value.
llvm-svn: 240529
Summary:
This affects other tools so the previous C++ API has been retained as a
deprecated function for the moment. Clang has been updated with a trivial
patch (not covered by the pre-commit review) to avoid breaking -Werror builds.
Other in-tree tools will be fixed with similar patches.
This continues the patch series to eliminate StringRef forms of GNU triples
from the internals of LLVM that began in r239036.
The first time this was committed it accidentally fixed an inconsistency in
triples in llvm-mc and this caused a failure. This inconsistency was fixed in
r239808.
Reviewers: rengolin
Reviewed By: rengolin
Subscribers: llvm-commits, rengolin
Differential Revision: http://reviews.llvm.org/D10366
llvm-svn: 239812
Summary:
This affects other tools so the previous C++ API has been retained as a
deprecated function for the moment. Clang has been updated with a trivial
patch (not covered by the pre-commit review) to avoid breaking -Werror builds.
Other in-tree tools will be fixed with similar trivial patches.
This continues the patch series to eliminate StringRef forms of GNU triples
from the internals of LLVM that began in r239036.
Reviewers: rengolin
Reviewed By: rengolin
Subscribers: llvm-commits, rengolin
Differential Revision: http://reviews.llvm.org/D10366
llvm-svn: 239721
Linking the debug frame section is actually very easy as we just have to
patch the start address in the FDE header and then copy the rest of the
FDE without even looking at it. The only small complexity comes from the
handling of the CIEs that we should unique across object file. This is
also really easy by using a StringMap keyed on the raw contents of the
CIE.
llvm-svn: 239198
The main use of the YAML debug map format is for testing inside LLVM. If we have IR
files in the tests used to generate object files, then we obviously don't know the
addresses of the symbols inside the object files beforehand.
This change lets the YAML import lookup the addresses in the object files and rewrite
them. This will allow to have test that really don't need any binary input.
llvm-svn: 239189
It will get a bit bigger in an upcoming commit. No need to have all
of that in the header.
Also move parseYAMLDebugMap() to the same place as the serialization
code. This way it will be able to share a private Context object with
it.
llvm-svn: 239185
With a couple more constructors that GCC thinks are necessary.
Original commit message:
[dsymutil] Accept a YAML debug map as input instead of a binary.
To do this, the user needs to pass the new -y flag.
As it wasn't tested before, the debug map YAML deserialization was
completely buggy (mainly because the DebugMapObject has a dual
mapping that allows to search by name and by address, but only the
StringMap got populated). It's fixed and tested in this commit by
augmenting some test with a 2 stage dwarf link: a frist llvm-dsymutil
reads the debug map and pipes it in a second instance that does the
actual link without touching the initial binary.
llvm-svn: 238959
To do this, the user needs to pass the new -y flag.
As it wasn't tested before, the debug map YAML deserialization was
completely buggy (mainly because the DebugMapObject has a dual
mapping that allows to search by name and by address, but only the
StringMap got populated). It's fixed and tested in this commit by
augmenting some test with a 2 stage dwarf link: a frist llvm-dsymutil
reads the debug map and pipes it in a second instance that does the
actual link without touching the initial binary.
llvm-svn: 238941
As the serialized debug map is becoming a first class citizen, a way
to cleanly dump it is required. We used -parse-only combined with
-v for that purpose before, but it dumps a lot of unrelated debug
stuff. Dumping the debug map was the only use of the -parse-only flag
anyway, so replace it with a more useful option.
llvm-svn: 238940
Doing so will allow us to also accept a YAML debug map in input as using
YAMLIO gives us the parsing for free. Being able to have textual debug
maps will in turn allow much more control over the tests, because 1/
no need to check-in a binary containing the debug map and 2/ it will allow
to use the same objects/IR files with made-up debug-maps to test
different scenari.
llvm-svn: 238781
Stop storing a `DIEAbbrev` in `DIE`, since the data fits neatly inside
the `DIEValue` list. Besides being a cleaner data structure (avoiding
the parallel arrays), this gives us more freedom to rearrange the
`DIEValue` list.
This fixes the temporary memory regression from 845 MB up to 879 MB, and
drops it further to 829 MB for a net memory decrease of around 1.9%
(incremental decrease around 5.7%).
(I'm looking at `llc` memory usage on `verify-uselistorder.lto.opt.bc`;
see r236629 for details.)
llvm-svn: 238364
This reverts commit r238350, effectively reapplying r238349 after fixing
(all?) the problems, all somehow related to how I was using
`AlignedArrayCharUnion<>` inside `DIEValue`:
- MSVC can only handle `sizeof()` on types, not values. Change the
assert.
- GCC doesn't know the `is_trivially_copyable` type trait. Instead of
asserting it, add destructors.
- Call placement new even when constructing POD (i.e., the pointers).
- Instead of copying the char buffer, copy the casted classes.
I've left in a couple of `static_assert`s that I think both MSVC and GCC
know how to handle. If the bots disagree with me, I'll remove them.
- Check that the constructed type is either standard layout or a
pointer. This protects against a programming error: we really want
the "small" `DIEValue`s to be small and simple, so don't
accidentally change them not to be.
- Similarly, check that the size of the buffer is no bigger than a
`uint64_t` or a pointer. (I thought checking against
`sizeof(uint64_t)` would be good enough, but Chandler suggested that
pointers might sometimes be bigger than that in the context of
sanitizers.)
I've also committed r238359 in the meantime, which introduces a
DIEValue.def to simplify dispatching between the various types (thanks
to a review comment by David Blaikie). Without that, this commit would
be almost unintelligible.
Here's the original commit message:
--
Change `DIEValue` to be stored/passed/etc. by value, instead of
reference. It's now a discriminated union, with a `Val` field storing
the actual type. The classes that used to inherit from `DIEValue` no
longer do. There are two categories of these:
- Small values fit in a single pointer and are stored by value.
- Large values require auxiliary storage, and are stored by reference.
The only non-mechanical change is to tools/dsymutil/DwarfLinker.cpp. It
was relying on `DIEInteger`s being passed around by reference, so I
replaced that assumption with a `PatchLocation` type that stores a safe
reference to where the `DIEInteger` lives instead.
This commit causes a temporary regression in memory usage, since I've
left merging `DIEAbbrevData` into `DIEValue` for a follow-up commit. I
measured an increase from 845 MB to 879 MB, around 3.9%. The follow-up
drops it lower than the starting point, and I've only recently brought
the memory this low anyway, so I'm committing these changes separately
to keep them incremental. (I also considered swapping the commits, but
the other one first would cause a lot more code churn.)
(I'm looking at `llc` memory usage on `verify-uselistorder.lto.opt.bc`;
see r236629 for details.)
--
llvm-svn: 238362
This reverts commit r238349, since it caused some errors on bots:
- std::is_trivially_copyable isn't available until GCC 5.0.
- It was complaining about strict aliasing with my use of
ArrayCharUnion.
llvm-svn: 238350
Change `DIEValue` to be stored/passed/etc. by value, instead of
reference. It's now a discriminated union, with a `Val` field storing
the actual type. The classes that used to inherit from `DIEValue` no
longer do. There are two categories of these:
- Small values fit in a single pointer and are stored by value.
- Large values require auxiliary storage, and are stored by reference.
The only non-mechanical change is to tools/dsymutil/DwarfLinker.cpp. It
was relying on `DIEInteger`s being passed around by reference, so I
replaced that assumption with a `PatchLocation` type that stores a safe
reference to where the `DIEInteger` lives instead.
This commit causes a temporary regression in memory usage, since I've
left merging `DIEAbbrevData` into `DIEValue` for a follow-up commit. I
measured an increase from 845 MB to 879 MB, around 3.9%. The follow-up
drops it lower than the starting point, and I've only recently brought
the memory this low anyway, so I'm committing these changes separately
to keep them incremental. (I also considered swapping the commits, but
the other one first would cause a lot more code churn.)
(I'm looking at `llc` memory usage on `verify-uselistorder.lto.opt.bc`;
see r236629 for details.)
llvm-svn: 238349
This starts merging MCSection and MCSectionData.
There are a few issues with the current split between MCSection and
MCSectionData.
* It optimizes the the not as important case. We want the production
of .o files to be really fast, but the split puts the information used
for .o emission in a separate data structure.
* The ELF/COFF/MachO hierarchy is not represented in MCSectionData,
leading to some ad-hoc ways to represent the various flags.
* It makes it harder to remember where each item is.
The attached patch starts merging the two by moving the alignment from
MCSectionData to MCSection.
Most of the patch is actually just dropping 'const', since
MCSectionData is mutable, but MCSection was not.
llvm-svn: 237936
DWARF standard claims that each compilation/type unit header in
.debug_info/.debug_types section must be followed by corresponding
compile/type unit DIE, possibly with its children. Two situations
are possible:
* compile/type unit DIE is missing because DWARF producer failed to
emit it.
* DWARF parser failed to parse unit DIE correctly, for instance if it
contains some unsupported attributes (see r237721, for instance).
In either of these cases, the library, and the tools that use it
(llvm-dwarfdump, llvm-symbolizer) should not crash. Insert appropriate
checks to protect against this.
llvm-svn: 237733
The code this patch removes was there to make sure the text sections went
before the dwarf sections. That is necessary because MachO uses offsets
relative to the start of the file, so adding a section can change relaxations.
The dwarf sections were being printed at the start just to produce symbols
pointing at the start of those sections.
The underlying issue was fixed in r231898. The dwarf sections are now printed
when they are about to be used, which is after we printed the text sections.
To make sure we don't regress, the patch makes the MachO streamer assert
if CodeGen puts anything unexpected after the DWARF sections.
llvm-svn: 232842
Before this patch code wanting to create temporary labels for a given entity
(function, cu, exception range, etc) had to keep its own counter to have stable
symbol names.
createTempSymbol would still add a suffix to make sure a new symbol was always
returned, but it kept a single counter. Because of that, if we were to use
just createTempSymbol("cu_begin"), the label could change from cu_begin42 to
cu_begin43 because some other code started using temporary labels.
Simplify this by just keeping one counter per prefix and removing the various
specialized counters.
llvm-svn: 232535
The information gathering part of the patch stores a bit more information
than what is strictly necessary for these 2 sections. The rest will
become useful when we start emitting __apple_* type accelerator tables.
llvm-svn: 232342
Also, after looking at the raw_svector_stream internals, increase the
size of the SmallString used with it to prevent heap allocation.
Issue found by the Asan bot.
llvm-svn: 232335
This code comes with a lot of cruft that is meant to mimic darwin's
dsymutil behavior. A much simpler approach (described in the numerous
FIXMEs that I put in there) gives the right output for the vast
majority of cases. The extra corner cases that are handled differently
need to be investigated: they seem to correctly handle debug info that
is in the input, but that info looks suspicious in the first place.
Anyway, the current code needs to handle this, but I plan to revisit it
as soon as the big round of validation against the classic dsymutil is
over.
llvm-svn: 232333
Adrian Prantl