Introduces the AddrFI "addressing mode", which is necessary simply because
it's not possible to write a pattern that directly matches a frameindex.
Ensure callee-saved registers are accessed relative to the stackpointer. This
is necessary as callee-saved register spills are performed before the frame
pointer is set.
Move HexagonDAGToDAGISel::isOrEquivalentToAdd to SelectionDAGISel, so we can
make use of it in the RISC-V backend.
Differential Revision: https://reviews.llvm.org/D39848
llvm-svn: 320353
All files and parts of files related to microMIPS4R6 are removed.
When target is microMIPS4R6, errors are printed.
This is LLVM part of patch.
Differential Revision: https://reviews.llvm.org/D35625
llvm-svn: 320350
This matches AVX512 version and is more consistent overall. And improves our scheduler models.
In some cases this adds _Int to instructions that didn't have any Int_ before. It's a side effect of the adjustments made to some of the multiclasses.
llvm-svn: 320325
This separates the CPU specific scheduler model includes to occur after the instructions. Moves the instruction includes between the basic scheduler information and the CPU specific scheduler models.
llvm-svn: 320313
CreateAddRecFromPHIWithCastsImpl() adds an IncrementNUSW overflow predicate
which allows the PSCEV rewriter to rewrite this scev expression:
(zext i8 {0, + , (trunc i32 step to i8)} to i32)
into
{0, +, (sext i8 (trunc i32 step to i8) to i32)}
But then it adds the wrong Equal predicate:
%step == (zext i8 (trunc i32 %step to i8) to i32).
instead of:
%step == (sext i8 (trunc i32 %step to i8) to i32)
This is fixed here.
Differential Revision: https://reviews.llvm.org/D40641
llvm-svn: 320298
This adds assembly & disassembly support for the e500mc "external pid"
instructions.
See https://reviews.llvm.org/D39249.
Patch by vit9696 <vit9696@avp.su>
llvm-svn: 320287
This affects CVTSD2SS, FMA, RCP28, RSQRT28, and SQRT scalar instructions
'b' here refers to 'sae' not broadcast. These aren't memory instructions.
llvm-svn: 320281
If the question mark is inside the parentheses it only applies to the single character proceeding it.
I had to make a few additional cleanups to fix some duplicate warnings that were exposed by fixing this.
llvm-svn: 320279
When the lowest bits of the operands to an integer multiply are known, the low bits of the result are deducible.
Code to deduce known-zero bottom bits already existed, but this change improves on that by deducing known-ones.
Patch by: Pedro Ferreira
Reviewers: craig.topper, sanjoy, efriedma
Differential Revision: https://reviews.llvm.org/D34029
llvm-svn: 320269
We may need to widen the vector to make the shifts legal, but if we do that we need to make sure we shift left/right after accounting for the new size. If not we can't guarantee we are shifting in zeros.
The test cases affected actually show cases where we should move the shifts all together, but that's another problem.
llvm-svn: 320248
We were previously using kunpck with zero inputs unnecessarily. And we had cases where we would insert into a zero vector and then insert into larger zero vector incurring two sets of shifts.
llvm-svn: 320244
Summary:
This relaxes an assertion inside SelectionDAGBuilder which is overly
restrictive on targets which have no concept of alignment (such as AVR).
In these architectures, all types are aligned to 8-bits.
After this, LLVM will only assert that accesses are aligned on targets
which actually require alignment.
This patch follows from a discussion on llvm-dev a few months ago
http://llvm.1065342.n5.nabble.com/llvm-dev-Unaligned-atomic-load-store-td112815.html
Reviewers: bogner, nemanjai, joerg, efriedma
Reviewed By: efriedma
Subscribers: efriedma, cactus, llvm-commits
Differential Revision: https://reviews.llvm.org/D39946
llvm-svn: 320243
The outliner previously would never outline calls. Calls are pretty common in
files, so it makes sense to outline them. In fact, in the LLVM test suite, if
you count the number of instructions that the outliner misses when you outline
calls vs when you don't, it turns out that, on average, around 6% of the
instructions encountered are calls. So, if we outline calls, we can find more
candidates, and thus save some more space.
This commit adds that functionality and updates the mir test to reflect that.
llvm-svn: 320229
Summary:
Reuse the Linux new mapping as it is.
Sponsored by <The NetBSD Foundation>
Reviewers: joerg, eugenis, vitalybuka
Reviewed By: vitalybuka
Subscribers: llvm-commits, #sanitizers
Tags: #sanitizers
Differential Revision: https://reviews.llvm.org/D41022
llvm-svn: 320219
Summary:
This is LLVM instrumentation for the new HWASan tool. It is basically
a stripped down copy of ASan at this point, w/o stack or global
support. Instrumenation adds a global constructor + runtime callbacks
for every load and store.
HWASan comes with its own IR attribute.
A brief design document can be found in
clang/docs/HardwareAssistedAddressSanitizerDesign.rst (submitted earlier).
Reviewers: kcc, pcc, alekseyshl
Subscribers: srhines, mehdi_amini, mgorny, javed.absar, eraman, llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D40932
llvm-svn: 320217
MachineSink attempts to place instructions near the basic blocks where
they are needed. Once an instruction has been sunk, its location
relative to other instructions no longer is consistent with the
original source code. In order to ensure correct stepping in the
debugger, the debug location for sunk instructions is either merged
with the insertion point or erased if the target successor block is
empty.
Originally submitted as r318679, revised to fix sanitizer failure and
improve testing.
Patch by Matthew Voss!
Differential Revision: https://reviews.llvm.org/D39933
llvm-svn: 320216
Both had a declaration of EmitXRayTable, but there is no method defined in either with that name. There is a emitXRayTable in the base class with a lower case 'e' and they both call that.
llvm-svn: 320213
Work towards the unification of MIR and debug output by refactoring the
interfaces.
Add support for operand subreg index as an immediate to debug printing
and use ::print in the MIRPrinter.
Differential Review: https://reviews.llvm.org/D40965
llvm-svn: 320209
Summary:
If a partially inlined function has debug info, we have to add debug
locations to the call instruction calling the outlined function.
We use the debug location of the first instruction in the outlined
function, as the introduced call transfers control to this statement and
there is no other equivalent line in the source code.
We also use the same debug location for the branch instruction added
to jump from artificial entry block for the outlined function, which just
jumps to the first actual basic block of the outlined function.
Reviewers: davide, aprantl, rriddle, dblaikie, danielcdh, wmi
Reviewed By: aprantl, rriddle, danielcdh
Subscribers: eraman, JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D40413
llvm-svn: 320199
This includes a fix so that it doesn't transform declarations, and it
puts the functionality under control of a command-line option which is off
by default to avoid breaking existing setups.
llvm-svn: 320196
For narrow sizes we'll widen the zero vector and widen the insert. Then do an extract_subvector to get back down to correct size.
This allows us to remove some patterns from the isel table that had to COPY_TO_REGCLASS to an oversized register, do the shift and then COPY_TO_REGCLASS back to the narrow register. Now this is represented explicitly in the DAG.
This seems to have perturbed the register allocation in one of the tests, but the number of instructions didn't change.
llvm-svn: 320190
Causes unexpected memory issue with New PM this time.
The new PM invalidates BPI but not BFI, leaving the
reference to BPI from BFI invalid.
Abandon this patch. There is a more general solution
which also handles runtime infinite loop (but not statically).
llvm-svn: 320180
Currently tagged these as system instructions, once we have uses for them (ASAN?) and they are faster we will need to improve on this.
llvm-svn: 320173
These are aliases, but the thing we're checking here is that the target has
vpsllv*, not that the data type is 256-bit. Those instructions exist for
128-bit vectors too...but sadly, not for all element sizes.
llvm-svn: 320170
Summary:
llvm-objdump's Mach-O parser was updated in r306037 to display external
relocations for MH_KEXT_BUNDLE file types. This change extends the Macho-O
parser to display local relocations for MH_PRELOAD files. When used with
the -macho option relocations will be displayed in a historical format.
rdar://35778019
Reviewers: enderby
Reviewed By: enderby
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D40867
llvm-svn: 320166
Alex Bradbury