This was originall reverted due to some test failures in
ModuleCache and TestCompDirSymlink. These issues have all
been resolved and the code now passes all tests.
Differential Revision: https://reviews.llvm.org/D30698
llvm-svn: 297300
this reverts r297116 because it breaks the unittests and
TestCompDirSymlink. The ModuleCache unit test is trivially fixable, but
the CompDirSymlink failure is a symptom of a deeper problem: llvm's stat
functionality is not a drop-in replacement for lldb's. The former is
based on stat(2) (which does symlink resolution), while the latter is
based on lstat(2) (which does not).
This also reverts subsequent build fixes (r297128, r297120, 297117) and
r297119 (Remove FileSpec dependency on FileSystem) which builds on top
of this.
llvm-svn: 297139
This deletes LLDB's FileType enumeration and replaces all
users, and all calls to functions that check whether a file
exists etc with corresponding calls to LLVM.
Differential Revision: https://reviews.llvm.org/D30624
llvm-svn: 297116
Summary:
getcwd() is not available (well.. um.. deprecated?) on windows, and the way
PosixApi.h is providing it causes strange compile errors when it's included in
the wrong order. The best way to avoid that is to just not use chdir.
This replaces all uses of getcwd in generic code. There are still a couple of
more uses, but these are in platform-specific code.
chdir() is causing a similar problem, but for that there is no llvm equivalent
for that (yet).
Reviewers: zturner
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D28858
llvm-svn: 292795
This is a large API change that removes the two functions from
StreamString that return a std::string& and a const std::string&,
and instead provide one function which returns a StringRef.
Direct access to the underlying buffer violates the concept of
a "stream" which is intended to provide forward only access,
and makes porting to llvm::raw_ostream more difficult in the
future.
Differential Revision: https://reviews.llvm.org/D26698
llvm-svn: 287152
*** to conform to clang-format’s LLVM style. This kind of mass change has
*** two obvious implications:
Firstly, merging this particular commit into a downstream fork may be a huge
effort. Alternatively, it may be worth merging all changes up to this commit,
performing the same reformatting operation locally, and then discarding the
merge for this particular commit. The commands used to accomplish this
reformatting were as follows (with current working directory as the root of
the repository):
find . \( -iname "*.c" -or -iname "*.cpp" -or -iname "*.h" -or -iname "*.mm" \) -exec clang-format -i {} +
find . -iname "*.py" -exec autopep8 --in-place --aggressive --aggressive {} + ;
The version of clang-format used was 3.9.0, and autopep8 was 1.2.4.
Secondly, “blame” style tools will generally point to this commit instead of
a meaningful prior commit. There are alternatives available that will attempt
to look through this change and find the appropriate prior commit. YMMV.
llvm-svn: 280751
It's always hard to remember when to include this file, and
when you do include it it's hard to remember what preprocessor
check it needs to be behind, and then you further have to remember
whether it's windows.h or win32.h which you need to include.
This patch changes the name to PosixApi.h, which is more appropriately
named, and makes it independent of any preprocessor setting.
There's still the issue of people not knowing when to include this,
because there's not a well-defined set of things it exposes other
than "whatever is missing on Windows", but at least this should
make it less painful to fix when problems arise.
This patch depends on LLVM revision r278170.
llvm-svn: 278177
This is a pretty straightforward first pass over removing a number of uses of
Mutex in favor of std::mutex or std::recursive_mutex. The problem is that there
are interfaces which take Mutex::Locker & to lock internal locks. This patch
cleans up most of the easy cases. The only non-trivial change is in
CommandObjectTarget.cpp where a Mutex::Locker was split into two.
llvm-svn: 269877
to each other. This should remove some infrequent teardown crashes when the
listener is not the debugger's listener.
Processes now need to take a ListenerSP, not a Listener&.
This required changing over the Process plugin class constructors to take a ListenerSP, instead
of a Listener&. Other than that there should be no functional change.
<rdar://problem/24580184> CrashTracer: [USER] Xcode at …ework: lldb_private::Listener::BroadcasterWillDestruct + 39
llvm-svn: 262863
correct OS type when running on an apple tv or apple watch.
Also, in TargetList::CreateTargetInternal, check that a platform
is returned by GetPlatformForArchitecture fallback instead of
adding it to the vector of platforms unconditionally; we can end up
crashing when we call a member function on it later.
<rdar://problem/23601982>, <rdar://problem/21292886>
llvm-svn: 253763
so when it is run on a kext (which won't activate
any platform plugins), you'll get a warning message
which may be helpful to the user.
llvm-svn: 252245
* ArchSpec::MergeFrom() would erroneously promote an unspecified
unknown to a specified unknown when both the ArchSpec and the merged
in ArchSpec were both unspecified unknowns. This no longer happens,
which fixes issues with global module cache lookup in some
situations.
* Added ArchSpec::DumpTriple(Stream&) that now properly prints
unspecified unknowns as '*' and specified unknows as 'unknown'.
This makes it trivial to tell the difference between the two.
Converted printing code over ot using DumpTriple() rather than
building from scratch.
* Fixed up a couple places that were not guaranteeing that an
unspecified unknown was recorded as such.
llvm-svn: 250253
Summary:
`IsRelativeToCurrentWorkingDirectory` was misleading, because relative paths
are sometimes appended to other directories, not just the cwd. Plus, the new
name is shorter. Also added `IsAbsolute` for completeness.
Reviewers: clayborg, ovyalov
Reviewed By: ovyalov
Subscribers: tberghammer, lldb-commits
Differential Revision: http://reviews.llvm.org/D10262
llvm-svn: 239419
Since interaction with the python interpreter is moving towards
being more isolated, we won't be able to include this header from
normal files anymore, all includes of it should be localized to
the python library which will live under source/bindings/API/Python
after a future patch.
None of the files that were including this header actually depended
on it anyway, so it was just a dead include in every single instance.
llvm-svn: 238581
A dummy target is used by TargetList::CreateTargetInternal to prime newly
created targets. the first time this is done it creates the dummy target. The
dummy target is created with the host platform (See
TargetList::CreateDummyTarget) which results in switching the selected platform
back to the host platform even when creating a target for a different platform.
This change avoids changing the selected platform while creating the dummy
target to prevent this side effect.
Test Plan:
./dotest.py $DOTEST_OPTS -t -p TestCreateAfterAttach.py
Tests using process attach (e.g. TestCreateAfterAttach.py, TestHelloWorld.py)
now run successfully mac -> linux.
Differential Revision: http://reviews.llvm.org/D9712
llvm-svn: 237221
Summary:
TargetList::CreateTargetInternal() will only select the current Platform. A previous patch always sets platform_sp to the current Platform, so a check later to see if platform_sp was not defined always failed, and the current Platform was used. This patch removes that check, so if the current Platform is not compatible with the target architecture, CreateTargetInternal() will call Platform::GetPlatformForArchitecture() to select a compatible Platform.
Vince, remote linux tests (Ubuntu -> remote Ubuntu) pass the same with and without this patch.
Reviewers: vharron, clayborg
Reviewed By: clayborg
Subscribers: jingham, lldb-commits
Differential Revision: http://reviews.llvm.org/D8749
llvm-svn: 237053
./dotest.py -A x86_64 -C clang -v -t -f TestImageListMultiArchitecture.test_image_list_shows_multiple_architectures
The problem was that if the platform wasn't compatible with the current file in the "target create" command, it wasn't finding a platform that was like it used to.
Also, the currently selected platform was being used upload the file _before_ the target was created which was incorrect as "target create a.out" might switch platforms if its architecture doesn't match, so I moved the uploading to happen after the target was created so we use the right platform (the one in the target, not the selected one).
llvm-svn: 227380
The change was made so we could re-use a platform if one was already created instead of creating a new one, but it would fail in the above case. To fix this, if we have a selected platform, we verify that the platform matches the current platform before we try to re-use it. We do this by asking the OptionGroupPlatform if the platform matches. If so, it returns true and we don't create a new platform, else we do.
llvm-svn: 227288
Make sure the selected platform is always used
Make sure that the host uses the connect://hostname to connect to both
the lldb-platform and the lldb-gdbserver rather than what the platform
reports as the hostname of the lldb-gdbserver
Make sure that lldb-platform uses the IP address on it's connection
back to the host instead of the hostname that the host sends to it
when launching lldb-gdbserver with the remote host information
Tested on OSX and Linux
llvm-svn: 226712
in the "dummy-target". The dummy target breakpoints prime all future
targets. Breakpoints set before any target is created (e.g. breakpoints
in ~/.lldbinit) automatically get set in the dummy target. You can also
list, add & delete breakpoints from the dummy target using the "-D" flag,
which is supported by most of the breakpoint commands.
This removes a long-standing wart in lldb...
<rdar://problem/10881487>
llvm-svn: 223565
(e.g. breakpoints, stop-hooks) before we have any targets - for instance in
your ~/.lldbinit file. These will then get copied over to any new targets
that get created. So far, you can only make stop-hooks.
Breakpoints will have to learn to move themselves from target to target for
us to get them from no-target to new-target.
We should also make a command & SB API way to prime this ur-target.
llvm-svn: 222600
Fixed include:
- Change Platform::ResolveExecutable(...) to take a ModuleSpec instead of a FileSpec + ArchSpec to help resolve executables correctly when we have just a path + UUID (no arch).
- Add the ability to set the listener in SBLaunchInfo and SBAttachInfo in case you don't want to use the debugger as the default listener.
- Modified all places that use the SBLaunchInfo/SBAttachInfo and the internal ProcessLaunchInfo/ProcessAttachInfo to not take a listener as a parameter since it is in the launch/attach info now
- Load a module's sections by default when removing a module from a target. Since we create JIT modules for expressions and helper functions, we could end up with stale data in the section load list if a module was removed from the target as the section load list would still have entries for the unloaded module. Target now has the following functions to help unload all sections a single or multiple modules:
size_t
Target::UnloadModuleSections (const ModuleList &module_list);
size_t
Target::UnloadModuleSections (const lldb::ModuleSP &module_sp);
llvm-svn: 222167
We've already created a FileSpec based on this local and
this code path would never be executed if it is an invalid
FilePath - but the static analyzer doesn't know this and I
want to placate it.
clang static analyzer fixit.
llvm-svn: 219890
Changes include:
- fix it so you can select the "host" platform using "platform select host"
- change all callbacks that create platforms to returns shared pointers
- fix TestImageListMultiArchitecture.py to restore the "host" platform by running "platform select host"
- Add a new "PlatformSP Platform::Find(const ConstString &name)" method to get a cached platform
- cache platforms that are created and re-use them instead of always creating a new one
llvm-svn: 218145
% lldb ios-executable
(lldb) platform connect connect://localhost:11111
Prior to this fix, the host platform would be selected even though the target was using the ios-remote platform.
llvm-svn: 217963
Also fixed the host 32 and 64 bit arch to return "x86_64-apple-macosx" again instead of "x86_64-apple-" (unspecified OS) after recent changes.
<rdar://problem/17845078>
llvm-svn: 214223
Fixes include:
- Don't say that "<arch>-apple-ios" is compatible with "<arch>-apple-macosx"
- Fixed DynamicLoaderMacOSXDYLD so specify an architecture that was converted solely from a cputype and subtype, just specify the file + UUID.
- Fixed PlatformiOSSimulator::GetSupportedArchitectureAtIndex() so it returns the correct archs
- Fixed SymbolFileDWARFDebugMap to load .o files correctly by just specifying the architecture without the vendor and OS now that "<arch>-apple-ios" is not compatible with "<arch>-apple-macosx" so we can load .o files correctly for DWARF with debug map
- Fixed the coded in TargetList::CreateTarget() so it does the right thing with an underspecified triple where just the arch is specified.
llvm-svn: 212783
to be explicit, to prevent horrid things like
std::string a = ConstString("foo")
from taking the path ConstString -> bool -> char
-> std::string.
This fixes, among other things, ClangFunction.
<rdar://problem/15137989>
llvm-svn: 191934
Created new LinuxThread class inherited from POSIXThread and removed linux / freebsd ifdefs
Removed several un-needed set thread name calls
CR (and multiple suggestions): mkopec
llvm-svn: 187545
- MachO files now correctly extract the UUID all the time
- More file size and offset verification done for universal mach-o files to watch for truncated files
- ObjectContainerBSDArchive now supports enumerating all objects in BSD archives (.a files)
- lldb_private::Module() can not be properly constructed using a ModuleSpec for a .o file in a .a file
- The BSD archive plug-in shares its cache for GetModuleSpecifications() and the create callback
- Improved printing for ModuleSpec objects
llvm-svn: 186211
std::string
Module::GetSpecificationDescription () const;
This returns the module as "/usr/lib/libfoo.dylib" for normal files (calls "std::string FileSpec::GetPath()" on m_file) but it also might include the object name in case the module is for a .o file in a BSD archive ("/usr/lib/libfoo.a(bar.o)"). Cleaned up necessary logging code to use it.
llvm-svn: 180717
There is a new static ObjectFile function you can call:
size_t
ObjectFile::GetModuleSpecifications (const FileSpec &file,
lldb::offset_t file_offset,
ModuleSpecList &specs)
This will fill in "specs" which the details of all the module specs (file + arch + UUID (if there is one) + object name (for BSD archive objects eventually) + file offset to the object in question).
This helps us when a user specifies a file that contains a single architecture, and also helps us when we are given a debug symbol file (like a dSYM file on MacOSX) that contains one or more architectures and we need to be able to match it up to an existing Module that has no debug info.
llvm-svn: 180224
realpathing the executable binary if we fail to find a
binary and if it starts with a ~ character, based on feedback
from Greg Clayton.
llvm-svn: 179904
Changes to lldb made the following fail when it used to work:
% cd /tmp
% lldb ls
error: unable to find executable for '/tmp/ls'
Resolving an executable with no relative path was broken, now its fixed.
llvm-svn: 178719
Fixed an issue where the platform auto select code was changing the architecture and causing the wrong architecture to be assigned to the target.
llvm-svn: 172251
equality can be strict or loose and we want code to
explicitly choose one or the other.
Also renamed the Compare function to IsEqualTo, to
avoid confusion.
<rdar://problem/12856749>
llvm-svn: 170152
- add new header lldb-python.h to be included before other system headers
- short term fix (eventually python dependencies must be cleaned up)
Patch by Matt Kopec!
llvm-svn: 169341
<rdar://problem/12068650>
More fixes to how we handle paths that are used to create a target.
This modification centralizes the location where and how what the user specifies gets resolved. Prior to this fix, the TargetList::CreateTarget variants took a FileSpec object which meant everyone had the opportunity to resolve the path their own way. Now both CreateTarget variants take a "const char *use_exe_path" which allows the TargetList::CreateTarget to centralize where the resolving happens and "do the right thing".
llvm-svn: 166186
Pavel Labath