subreg_hireg of register pair Rp.
* lib/Target/Hexagon/HexagonPeephole.cpp(PeepholeDoubleRegsMap): New
DenseMap similar to PeepholeMap that additionally records subreg info
too.
(runOnMachineFunction): Record information in PeepholeDoubleRegsMap
and copy propagate the high sub-reg of Rp0 in Rp1 = lsr(Rp0, #32) to
the instruction Rx = COPY Rp1:logreg_subreg.
* test/CodeGen/Hexagon/remove_lsr.ll: New test.
llvm-svn: 163214
- CodeGenPrepare pass for identifying div/rem ops
- Backend specifies the type mapping using addBypassSlowDivType
- Enabled only for Intel Atom with O2 32-bit -> 8-bit
- Replace IDIV with instructions which test its value and use DIVB if the value
is positive and less than 256.
- In the case when the quotient and remainder of a divide are used a DIV
and a REM instruction will be present in the IR. In the non-Atom case
they are both lowered to IDIVs and CSE removes the redundant IDIV instruction,
using the quotient and remainder from the first IDIV. However,
due to this optimization CSE is not able to eliminate redundant
IDIV instructions because they are located in different basic blocks.
This is overcome by calculating both the quotient (DIV) and remainder (REM)
in each basic block that is inserted by the optimization and reusing the result
values when a subsequent DIV or REM instruction uses the same operands.
- Test cases check for the presents of the optimization when calculating
either the quotient, remainder, or both.
Patch by Tyler Nowicki!
llvm-svn: 163150
This patch corrects the definition of umlal/smlal instructions and adds support
for matching them to the ARM dag combiner.
Bug 12213
Patch by Yin Ma!
llvm-svn: 163136
MatchInstructionImpl() function.
These values are used by the ConvertToMCInst() function to index into the
ConversionTable. The values are also needed to call the GetMCInstOperandNum()
function.
llvm-svn: 163101
For example, the ARM target does not have efficient ISel handling for vector
selects with scalar conditions. This patch adds a TLI hook which allows the
different targets to report which selects are supported well and which selects
should be converted to CF duting codegen prepare.
llvm-svn: 163093
NEON domain conversion was too heavy-handed with its widened
registers, which could have stripped existing instructions of their
dependency, leaving them vulnerable to scheduling errors.
llvm-svn: 163070
output chain is correctly setup.
As an example, if the original load must happen before later stores, we need
to make sure the constructed VZEXT_LOAD is constrained to be before the stores.
rdar://11457792
llvm-svn: 163036
- In addition to undefined, if V2 is zero vector, skip 2nd PSHUFB and POR as
well as PSHUFB will zero elements with negative indices.
Patch by Sriram Murali <sriram.murali@intel.com>
llvm-svn: 163018
on the size of the extraction and its position in the 64 bit word.
This patch allows support of the dext transformations with mips64 direct
object output.
0 <= msb < 32 0 <= lsb < 32 0 <= pos < 32 1 <= size <= 32
DINS
The field is entirely contained in the right-most word of the doubleword
32 <= msb < 64 0 <= lsb < 32 0 <= pos < 32 2 <= size <= 64
DINSM
The field straddles the words of the doubleword
32 <= msb < 64 32 <= lsb < 64 32 <= pos < 64 1 <= size <= 32
DINSU
The field is entirely contained in the left-most word of the doubleword
llvm-svn: 163010
The assembly string for the VMOVPQIto64rr instruction incorrectly lacked the 'v'
prefix, resulting in mis-assembly of the vanilla movd instruction.
llvm-svn: 162963
- Add 'UseSSEx' to force SSE legacy insn not being selected when AVX is
enabled.
As the penalty of inter-mixing SSE and AVX instructions, we need
prevent SSE legacy insn from being generated except explicitly
specified through some intrinsics. For patterns supported by both
SSE and AVX, so far, we force AVX insn will be tried first relying on
AddedComplexity or position in td file. It's error-prone and
introduces bugs accidentally.
'UseSSEx' is disabled when AVX is turned on. For SSE insns inherited
by AVX, we need this predicate to force VEX encoding or SSE legacy
encoding only.
For insns not inherited by AVX, we still use the previous predicates,
i.e. 'HasSSEx'. So far, these insns fall into the following
categories:
* SSE insns with MMX operands
* SSE insns with GPR/MEM operands only (xFENCE, PREFETCH, CLFLUSH,
CRC, and etc.)
* SSE4A insns.
* MMX insns.
* x87 insns added by SSE.
2 test cases are modified:
- test/CodeGen/X86/fast-isel-x86-64.ll
AVX code generation is different from SSE one. 'vcvtsi2sdq' cannot be
selected by fast-isel due to complicated pattern and fast-isel
fallback to materialize it from constant pool.
- test/CodeGen/X86/widen_load-1.ll
AVX code generation is different from SSE one after fixing SSE/AVX
inter-mixing. Exec-domain fixing prefers 'vmovapd' instead of
'vmovaps'.
llvm-svn: 162919
[Tobias von Koch] What's happening here is that the CR6SET/CR6UNSET is breaking the chain of register copies glued to the function call (BL_SVR4 node). The scheduler then moves other instructions in between those and the function call, which isn't good!
Right. That's the case where there is no chain of register copies before the call, so InFlag == 0... Attached is a new revision of the patch which should fix this for good.
llvm-svn: 162916
- The root cause is that target constant materialization in X86 fast-isel
creates a PC-rel addressing which may overflow 32-bit range in non-Small code
model if .rodata section is allocated too far away from code segment in
MCJIT, which uses Large code model so far.
- Follow the similar logic to fix non-Small code model in fast-isel by skipping
non-Small code model.
llvm-svn: 162881
Ordered memory operations are more constrained than volatile loads and
stores because they must be ordered with respect to all other memory
operations.
llvm-svn: 162861
We need to reserve space for the mandatory traceback fields,
though leaving them as zero is appropriate for now.
Although the ABI calls for these fields to be filled in fully, no
compiler on Linux currently does this, and GDB does not read these
fields. GDB uses the first word of zeroes during exception handling to
find the end of the function and the size field, allowing it to compute
the beginning of the function. DWARF information is used for everything
else. We need the extra 8 bytes of pad so the size field is found in
the right place.
As a comparison, GCC fills in a few of the fields -- language, number
of saved registers -- but ignores the rest. IBM's proprietary OSes do
make use of the full traceback table facility.
Patch by Bill Schmidt.
llvm-svn: 162854
Pranav Bhandarkar