On the PPC bot, the %llc_dwarf substitution does not contain an -mtriple
argument. This can cause the wrong backend to be exercised.
This causes issues because the backends differ in when they decide to
emit tail calls:
http://lab.llvm.org:8011/builders/clang-ppc64be-linux-multistage/builds/12440
This is mostly a speculative fix as I don't have a PPC machine to test
with.
llvm-svn: 343893
Previously, it had been using CK_BitCast even for casts that only
change const/restrict/volatile. Now it will use CK_Noop where
appropriate.
This is an alternate solution to r336746.
Differential Revision: https://reviews.llvm.org/D52918
llvm-svn: 343892
rL343853 didn't limit the number of subinputs, but we don't currently support faux shuffles with more than 2 total inputs, so put a limiter in place until this is fixed.
Found by Artem Dergachev.
llvm-svn: 343891
ASan often introduces basic blocks consisting exclusively of
instructions without debug locations, or with line 0 debug locations.
LiveDebugValues needs to extend variable ranges through these artificial
blocks. Otherwise, a lot of variables disappear -- even at -O0.
Typically, LiveDebugValues does not extend a variable's range into a
block unless the block is essentially "part of" the variable's scope
(for a precise definition, see LexicalScopes::dominates). This patch
relaxes the lexical dominance check for artificial blocks.
This makes the following Swift program debuggable at -O0:
```
1| var x = 100
2| print("x = \(x)")
```
rdar://39127144
Differential Revision: https://reviews.llvm.org/D52921
llvm-svn: 343890
This matches the output of binutils' nm and ensures that any scripts
or tools that use nm and expect empty output in case there no symbols
don't break.
Differential Revision: https://reviews.llvm.org/D52943
llvm-svn: 343887
Port over the implementation in SelectionDAGBuilder.cpp into the IRTranslator
and update the arm64-irtranslator test.
These were causing fallbacks in CTMark/Bullet (-Rpass-missed=gisel-select),
and this patch fixes that.
https://reviews.llvm.org/D52945
llvm-svn: 343885
NFC-ish (the parsing of the units is not a functional change - no
errors/warnings are emitted during the shallow parsing - though without
parsing them here, the "max version" would be wrong (still zero) later
on, so in those cases the units do need to be parsed)
llvm-svn: 343884
DWARF v5 introduces DW_AT_call_all_calls, a subprogram attribute which
indicates that all calls (both regular and tail) within the subprogram
have call site entries. The information within these call site entries
can be used by a debugger to populate backtraces with synthetic tail
call frames.
Tail calling frames go missing in backtraces because the frame of the
caller is reused by the callee. Call site entries allow a debugger to
reconstruct a sequence of (tail) calls which led from one function to
another. This improves backtrace quality. There are limitations: tail
recursion isn't handled, variables within synthetic frames may not
survive to be inspected, etc. This approach is not novel, see:
https://gcc.gnu.org/wiki/summit2010?action=AttachFile&do=get&target=jelinek.pdf
This patch adds an IR-level flag (DIFlagAllCallsDescribed) which lowers
to DW_AT_call_all_calls. It adds the minimal amount of DWARF generation
support needed to emit standards-compliant call site entries. For easier
deployment, when the debugger tuning is LLDB, the DWARF requirement is
adjusted to v4.
Testing: Apart from check-{llvm, clang}, I built a stage2 RelWithDebInfo
clang binary. Its dSYM passed verification and grew by 1.4% compared to
the baseline. 151,879 call site entries were added.
rdar://42001377
Differential Revision: https://reviews.llvm.org/D49887
llvm-svn: 343883
ld.bfd doesn't do any inference of subsystem; unless the windows
subsystem is specified, the console subsystem is used.
For the console subsystem, the entry point is called mainCRTStartup,
regardless of whether the the user code entry point is main or wmain.
The same goes for the windows subsystem, where the entry point always
is WinMainCRTStartup, for both WinMain and wWinMain in user code.
One detail that we don't emulate, is that if the inferred entry point
is undefined, ld.bfd silently just sets the entry point to the start
of the image. And if an explicit entry point is set, but it is
undefined, the link still succeeds but the linker warns about the
entry point not being found.
Differential Revision: https://reviews.llvm.org/D52931
llvm-svn: 343879
For certain cases of inline functions written to comdat sections,
GCC 5.x produces a weak symbol in addition, which would end up
undefined in some cases.
This no longer seems to happen with GCC 6.x or newer though.
Differential Revision: https://reviews.llvm.org/D52602
llvm-svn: 343877
getGUID() returns an uint64_t and "%x" only prints 32 bits of it.
Use PRIx64 format string to print all 64 bits.
Differential Revision: https://reviews.llvm.org/D52938
llvm-svn: 343875
Context: Compiler generated instructions do not have a debug location
assigned to them. However emitting 0-line records for all of them bloats
the line tables for very little benefit so we usually avoid doing that.
Not emitting anything will lead to the previous debug location getting
applied to the locationless instructions. This is not desirable for
block begin and after labels. Previously we would emit simply emit
line-0 records in this case, this patch changes the behavior to do a
forward search for a debug location in these cases before emitting a
line-0 record to further reduce line table bloat.
Inspired by the discussion in https://reviews.llvm.org/D52862
llvm-svn: 343874
The existing code kept the space if it was there for identifiers, and it didn't
handle `this`. After this patch, for Java `this` is handled in addition to
identifiers, and existing space is always stripped between identifier and `::`.
Also accept `::` in addition to `.` in front of `<` in `foo::<T>bar` generic
calls.
Differential Revision: https://reviews.llvm.org/D52842
llvm-svn: 343872
The comments in this code say we were trying to avoid 16-bit immediates, but if the immediate fits in 8-bits this isn't an issue. This avoids creating a zero extend that probably won't go away.
The movmskb related changes are interesting. The movmskb instruction writes a 32-bit result, but fills the upper bits with 0. So the zero_extend we were previously emitting was free, but we turned a -1 immediate that would fit in 8-bits into a 32-bit immediate so it was still bad.
llvm-svn: 343871
Currently we hardcode instructions with ReadAfterLd if the register operands don't need to be available until the folded load has completed. This doesn't take into account the different load latencies of different memory operands (PR36957).
This patch adds a ReadAfterFold def into X86FoldableSchedWrite to replace ReadAfterLd, allowing us to specify the load latency at a scheduler class level.
I've added ReadAfterVec*Ld classes that match the XMM/Scl, XMM and YMM/ZMM WriteVecLoad classes that we currently use, we can tweak these values in future patches once this infrastructure is in place.
Differential Revision: https://reviews.llvm.org/D52886
llvm-svn: 343868
The comment said it was intentionally not emitting any diagnostic
because the declaration itself was already diagnosed. However,
everywhere else that wants to not emit a diagnostic without an extra
note emits note_invalid_subexpr_in_const_expr instead, which gets
suppressed later.
This was the only place which did not emit a diagnostic note.
Differential Revision: https://reviews.llvm.org/D52919
llvm-svn: 343867
And use that to transform fsub with zero constant operands.
The integer part isn't used yet, but it is proposed for use in
D44548, so adding both enhancements here makes that
patch simpler.
llvm-svn: 343865
Summary:
When LLDB successfully parses a command (like "expression" in this case) and determines incomplete input, the user can continue typing on multiple lines (in this case "2+3"). This should provide the correct result.
Note that LLDB reverts input from the additional lines, so they are not present in the output.
Reviewers: vsk, davide, aprantl
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D52270
llvm-svn: 343860
Summary:
Add settings to control command echoing:
```
(lldb) settings set interpreter.echo-commands true
(lldb) settings set interpreter.echo-comment-commands true
```
Both settings default to true, which keeps LLDB's existing behavior in non-interactive mode (echo all command inputs to the output).
So far the only way to change this behavior was the `--source-quietly` flag, which disables all output including evaluation results.
Now `echo-commands` allows to turn off echoing for commands, while evaluation results are still printed. No effect if `--source-quietly` was present.
`echo-comment-commands` allows to turn off echoing for commands in case they are pure comment lines. No effect if `echo-commands` is false.
Note that the behavior does not change immediately! The new settings take effect only with the next command source.
LLDB lit test are the main motivation for this feature. So far incoming `#CHECK` line have always been echoed to the output and so they could never fail. Now we can disable it in lit-lldb-init.
Todos: Finish test for this feature. Add to lit-lldb-init. Check for failing lit tests.
Reviewers: aprantl, jasonmolenda, JDevlieghere
Subscribers: friss, lldb-commits
Differential Revision: https://reviews.llvm.org/D52788
llvm-svn: 343859
Fixed emission of the __kmpc_global_thread_num() so that it is not
messed up with alloca instructions anymore. Plus, fixes emission of the
__kmpc_global_thread_num() functions in the target outlined regions so
that they are not called before runtime is initialized.
llvm-svn: 343856
Decode subvector shuffles from INSERT_SUBVECTOR(SRC0, SHUFFLE(EXTRACT_SUBVECTOR(SRC1))
This was found necessary while investigating PR39161
llvm-svn: 343853
Call getOperandInfo() instead of using (near) duplicated code in
LoopVectorizationCostModel::getInstructionCost().
This gets the OperandValueKind and OperandValueProperties values for a Value
passed as operand to an arithmetic instruction.
getOperandInfo() used to be a static method in TargetTransformInfo.cpp, but
is now instead a public member.
Review: Florian Hahn
https://reviews.llvm.org/D52883
llvm-svn: 343852
Finally all targets are enabling multiple regalloc hints, so the hook to
disable this can now be removed.
NFC.
Review: Simon Pilgrim
https://reviews.llvm.org/D52316
llvm-svn: 343851
Summary:
This patch is a small refactoring necessary for
'readability-isolate-declaration' and does not introduce functional changes.
It allows to use the utility functions without a full `ASTContext` and requires only the `SourceManager` and the `LangOpts`.
Reviewers: alexfh, aaron.ballman, hokein
Reviewed By: alexfh
Subscribers: nemanjai, xazax.hun, kbarton, cfe-commits
Tags: #clang-tools-extra
Differential Revision: https://reviews.llvm.org/D52684
llvm-svn: 343850
This check warns the uses of the deprecated member types of std::ios_base
and replaces those that have a non-deprecated equivalent.
Patch by andobence!
Reviewd by: alexfh
Revision ID: https://reviews.llvm.org/D51332
llvm-svn: 343848
(patch by Benoit Rousseau)
This patch fixes a bug where the global variable initializers were sometimes not invoked in the correct order when it involved a C++ template instantiation.
Differential Revision: https://reviews.llvm.org/D52749
llvm-svn: 343847
Calling getMacroArgExpansionLocation too early was causing
Lexer::getRawToken to do the wrong thing - lexing the macro name instead
of the arg contents.
Differential Revision: https://reviews.llvm.org/D52928
llvm-svn: 343844
Vedant Kumar