When we have a shuffle that extends a source vector with undefs
and then do some binop on that, we must make sure that the extra
elements remain undef with that binop if we reverse the order of
the binop and shuffle.
'or' is probably the easiest example to show the bug because
'or C, undef --> -1' (not undef). But there are other
opcode/constant combinations where this is true as shown by
the 'shl' test.
llvm-svn: 348191
No behavior change, just makes the script match the other scripts in
llvm/utils/gn/build.
Differential Revision: https://reviews.llvm.org/D55183
llvm-svn: 348190
Buildbot failures were caused by an unrelated UB that was introduced in r347943
and fixed in r347970.
Also the revision was incorrectly specified as r344580 during revert.
Differential Revision: https://reviews.llvm.org/D54017
llvm-svn: 348188
Make sure that symbols needed to implement runtime support for gcov are
exported when using an export list on Darwin.
Without the clang driver exporting these symbols, the linker hides them,
resulting in tapi verification failures.
rdar://45944768
Differential Revision: https://reviews.llvm.org/D55151
llvm-svn: 348187
Summary:
The assembler processes directives and instructions in whatever order
they are in the file, then directly emits them to the streamer. This
could cause badly written (or generated) .s files to produce
incorrect binaries.
It now has state that tracks what it has most recently seen, to
enforce they are emitted in a given order that always produces
correct wasm binaries.
Also added a new test that compares obj2yaml output from llc (the
backend) to that going via .s and the assembler to ensure both paths
generate the same binaries.
The features this test covers could be extended.
Passes all wasm Lit tests.
Fixes: https://bugs.llvm.org/show_bug.cgi?id=39557
Reviewers: sbc100, dschuff, aheejin
Subscribers: jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D55149
llvm-svn: 348185
Workaround naming and hierarchy changes in BaseHTTPServer and SimpleHTTPServer module.
Differential Revision: https://reviews.llvm.org/D55203
llvm-svn: 348184
Python2 supports both backticks and `repr` to access the __repr__ slot. Python3 only supports `repr`.
Differential Revision: https://reviews.llvm.org/D55201
llvm-svn: 348182
I found the pattern of setting the project_BUILD variable to OFF after
processing the project to be pretty confusing. Using global properties
to explicitly keep track of whether a project has been processed or not
seems much more straightforward, and it also allows us to convert the
macro into a function (which is required for the early return).
Factor the project+type+name combination out into a variable while I'm
here, since it's used a whole bunch of times.
I don't believe this should result in any functional changes.
Differential Revision: https://reviews.llvm.org/D55104
llvm-svn: 348180
Making the section writable doesn't affect how windows does
base relocs in case a DLL can't be loaded at the intended base
address.
This comment dates back to SVN r79346.
Differential Revision:
llvm-svn: 348178
This improves compatibility with GCC produced object files, where
the .eh_frame sections are read only. With mixed flags for the
involved .eh_frame sections, LLD creates two separate .eh_frame
sections in the output binary, one for each flag combination,
while ld.bfd probably merges them.
The previous setup of flags can be traced back to SVN r79346.
Differential Revision: https://reviews.llvm.org/D55209
llvm-svn: 348177
This flag does not exist in GNU objcopy but has a major use case.
Debugging tools support the .build-id directory structure to find
debug binaries. There is no easy way to build this structure up
however. One way to do it is by using llvm-readelf and some crazy
shell magic. This implements the feature directly. It is most often
the case that you'll want to strip a file and send the original to
the .build-id directory but if you just want to send a file to the
.build-id directory you can copy to /dev/null instead.
Differential Revision: https://reviews.llvm.org/D54384
llvm-svn: 348174
http://lists.llvm.org/pipermail/llvm-dev/2018-September/126472.html
TextAPI is a library and accompanying tool that allows conversion between binary shared object stubs and textual counterparts. The motivations and uses cases for this are explained thoroughly in the llvm-dev proposal [1]. This initial commit proposes a potential structure for the TAPI library, also including support for reading/writing text-based ELF stubs (.tbe) in addition to preliminary support for reading binary ELF files. The goal for this patch is to ensure the project architecture appropriately welcomes integration of Mach-O stubbing from Apple's TAPI [2].
Added:
- TextAPI library
- .tbe read support
- .tbe write (to raw_ostream) support
[1] http://lists.llvm.org/pipermail/llvm-dev/2018-September/126472.html
[2] https://github.com/ributzka/tapi
Differential Revision: https://reviews.llvm.org/D53051
llvm-svn: 348170
Summary:
This check finds instances where Duration values are being converted to a numeric value in a comparison expression, and suggests that the conversion happen on the other side of the expression to a Duration. See documentation for examples.
This also shuffles some code around so that the new check may perform in sone step simplifications also caught by other checks.
Compilation is unbroken, because the hash-function is now directly
specified for std::unordered_map, as 'enum class' does not compile as
key (seamingly only on some compilers).
Patch by hwright.
Reviewers: aaron.ballman, JonasToth, alexfh, hokein
Reviewed By: JonasToth
Subscribers: sammccall, Eugene.Zelenko, xazax.hun, cfe-commits, mgorny
Tags: #clang-tools-extra
Differential Revision: https://reviews.llvm.org/D54737
llvm-svn: 348169
If it's a bigger code size win to drop candidates that require stack fixups
than to demote every candidate to that variant, the outliner should do that.
This happens if the number of bytes taken by calls to functions that don't
require fixups, plus the number of bytes that'd be left is less than the
number of bytes that it'd take to emit a save + restore for all candidates.
Also add tests for each possible new behaviour.
- machine-outliner-compatible-candidates shows that when we have candidates
that don't use the stack, we can use the default call variant along with the
no save/regsave variant.
- machine-outliner-all-stack shows that when it's better to fix up the stack,
we still will demote all candidates to that case
- machine-outliner-drop-stack shows that we can discard candidates that
require stack fixups when it would be beneficial to do so.
llvm-svn: 348168
Part of the patch to not build the hash map eagerly was omitted
due to a merge conflict. Add it back, which should fix the failing
tests.
llvm-svn: 348166
Summary:
This check finds instances where Duration values are being converted to a numeric value in a comparison expression, and suggests that the conversion happen on the other side of the expression to a Duration. See documentation for examples.
This also shuffles some code around so that the new check may perform in sone step simplifications also caught by other checks.
Patch by hwright.
Reviewers: aaron.ballman, JonasToth, alexfh, hokein
Reviewed By: JonasToth
Subscribers: sammccall, Eugene.Zelenko, xazax.hun, cfe-commits, mgorny
Tags: #clang-tools-extra
Differential Revision: https://reviews.llvm.org/D54737
llvm-svn: 348161
Summary:
We need to unpackl and unpackh the operands to use two vXi16 multiplies. Previously it looks like the low unpack would get constant folded at least in the 128-bit case after shuffle lowering turned the unpackl into ZERO_EXTEND_VECTOR_INREG and X86 custom DAG combined it. The same doesn't happen for the high half. So we'd load a constant and then shuffle it. But the low half would just be loaded and used by the multiply directly.
After this patch we now end up with a constant pool entry for the low and high unpacks separately with no shuffle operations.
This is a step towards removing custom constant folding for ZERO_EXTEND_VECTOR_INREG/SIGN_EXTEND_VECTOR_INREG in the X86 backend.
Reviewers: RKSimon, spatel
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D55165
llvm-svn: 348159
Summary:
Under -x86-experimental-vector-widening-legalization, fp_to_uint/fp_to_sint with a smaller than 128 bit vector type results are custom type legalized by promoting the result to a 128 bit vector by promoting the elements, inserting an assertzext/assertsext, then truncating back to original type. The truncate will be further legalizdd to a pack shuffle. In the case of a v8i8 result type, we'll end up with a v8i16 fp_to_sint. This will need to be further legalized during vector op legalization by promoting to v8i32 and then truncating again. Under avx2 this produces good code with two pack instructions, but Under avx512 this will result in a truncate instruction and a packuswb instruction. But we should be able to get away with a single truncate instruction.
The other option is to promote all the way to vXi32 result type during the first type legalization. But in some experimentation that seemed to require more work to produce good code for other configurations.
Reviewers: RKSimon, spatel
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D54836
llvm-svn: 348158
The clang frontend no longer emits the current working directory for
DIFiles containing an absolute path in the filename: and will move the
common prefix between current working directory and the file into the
directory: component.
https://reviews.llvm.org/D55085
llvm-svn: 348155
As discussed on llvm-dev recently, Clang currently emits redundant
directories in DIFile entries, such as
.file 1 "/Volumes/Data/llvm" "/Volumes/Data/llvm/tools/clang/test/CodeGen/debug-info-abspath.c"
This patch looks at any common prefix between the compilation
directory and the (absolute) file path and strips the redundant
part. More importantly it leaves the compilation directory empty if
the two paths have no common prefix.
After this patch the above entry is (assuming a compilation dir of "/Volumes/Data/llvm/_build"):
.file 1 "/Volumes/Data/llvm" "tools/clang/test/CodeGen/debug-info-abspath.c"
When building the FileCheck binary with debug info, this patch makes
the build artifacts ~1kb smaller.
Differential Revision: https://reviews.llvm.org/D55085
llvm-svn: 348154
At least on Linux, if a file size given to FileOutputBuffer is greater
than 2^63, it fails with "Invalid argument" error, which is not a
user-friendly error message. With this patch, lld prints out "output
file too large" instead.
llvm-svn: 348153
This patch changes the way the reproducer is initialized. Rather than
making changes at run time we now do everything at initialization time.
To make this happen we had to introduce initializer options and their SB
variant. This allows us to tell the initializer that we're running in
reproducer capture/replay mode.
Because of this change we also had to alter our testing strategy. We
cannot reinitialize LLDB when using the dotest infrastructure. Instead
we use lit and invoke two instances of the driver.
Another consequence is that we can no longer enable capture or replay
through commands. This was bound to go away form the beginning, but I
had something in mind where you could enable/disable specific providers.
However this seems like it adds very little value right now so the
corresponding commands were removed.
Finally this change also means you now have to control this through the
driver, for which I replaced --reproducer with --capture and --replay to
differentiate between the two modes.
Differential revision: https://reviews.llvm.org/D55038
llvm-svn: 348152
These are the baseline tests for D54827.
Patch based on code originally written by: @yinyuefengyi (luo xionghu)
Differential Revision: https://reviews.llvm.org/D54994
llvm-svn: 348151
Remove the pointless "+ 0" which I added for some reason when
modifying these statement/expression classes since it looks
like this is a typo. Following the suggestion of aaron.ballman
in D54902. NFC.
llvm-svn: 348150
There are potential improvements to the structure of this API
raised by D54994, but remove some cosmetic blemishes before
making any functional changes.
llvm-svn: 348149
Summary:
Memory-mapping files on Windows leads to them being locked and prevents
editors from saving changes to those files on disk. This is fine for the
compiler, but not acceptable for an interactive tool like clangd.
Therefore, we choose to avoid using memory-mapped files on Windows.
Reviewers: hokein, kadircet
Reviewed By: kadircet
Subscribers: yvvan, zturner, nik, malaperle, mgorny, ioeric, MaskRay, jkorous, arphaman, cfe-commits
Differential Revision: https://reviews.llvm.org/D55139
llvm-svn: 348147
CallExpr::setNumArgs is the only thing that prevents storing the arguments
in a trailing array. There is only 3 places in Sema where setNumArgs is called.
D54900 dealt with one of them.
This patch remove the other two calls to setNumArgs in ConvertArgumentsForCall.
To do this we do the following changes:
1.) Replace the first call to setNumArgs by an assertion since we are moving the
responsability to allocate enough space for the arguments from
Sema::ConvertArgumentsForCall to its callers
(which are Sema::BuildCallToMemberFunction, and Sema::BuildResolvedCallExpr).
2.) Add a new member function CallExpr::shrinkNumArgs, which can only be used
to drop arguments and then replace the second call to setNumArgs by
shrinkNumArgs.
3.) Add a new defaulted parameter MinNumArgs to CallExpr and its derived
classes which specifies a minimum number of argument slots to allocate.
The actual number of arguments slots allocated will be
max(number of args, MinNumArgs) with the extra args nulled. Note that
after the creation of the call expression all of the arguments will be
non-null. It is just during the creation of the call expression that some of
the last arguments can be temporarily null, until filled by default arguments.
4.) Update Sema::BuildCallToMemberFunction by passing the number of parameters
in the function prototype to the constructor of CXXMemberCallExpr. Here the
change is pretty straightforward.
5.) Update Sema::BuildResolvedCallExpr. Here the change is more complicated
since the type-checking for the function type was done after the creation of
the call expression. We need to move this before the creation of the call
expression, and then pass the number of parameters in the function prototype
(if any) to the constructor of the call expression.
6.) Update the deserialization of CallExpr and its derived classes.
Differential Revision: https://reviews.llvm.org/D54902
Reviewed By: aaron.ballman
llvm-svn: 348145
It appears that print-module-scope was not implemented for legacy SCC passes.
Fixed to print a whole module instead of just current SCC.
Reviewed By: mkazantsev
Differential Revision: https://reviews.llvm.org/D54793
llvm-svn: 348144
There is no need to check that In.DynSymTab != nullptr,
because `includeInDynsym` already checks for `!Config->HasDynSymTab`
and `HasDynSymTab` is the pre-condition for In.DynSymTab creation.
llvm-svn: 348143
Summary:
SSBS (Speculative Store Bypass Safe) is only mandatory from 8.5
onwards but is optional from Armv8.0-A. This patch adds testing for
the ssbs command line option, added to allow enabling the feature
in previous Armv8-A architectures to 8.5.
Reviewers: olista01, samparker, aemerson
Reviewed By: samparker
Subscribers: javed.absar, kristof.beyls, cfe-commits
Differential Revision: https://reviews.llvm.org/D54961
llvm-svn: 348142
Sanjay Patel