Also adds enable.py/disable.py script to simplify turning on and off
the issue_verification tests helpful for testing a results formatter.
llvm-svn: 255161
This was an option to display a graphical progress bar. Nobody
is using this, and it doesn't work correctly anyway with the new
result formatter.
llvm-svn: 255153
This removes the failfast command line option as part of an effort
to simplify dotest and remove unused command line options. You can
still Ctrl+C any time you want to exit early.
llvm-svn: 255150
The main dotest.py should exit with a system return code of 1 on any
issue. This change fixes a place where I omitted counting the
exceptional exit value to determine if we should return 1 when using the
new summary results.
This change also puts a banner around the Issue Details section that comes
before the Test Result Summary.
llvm-svn: 255138
This change is a trial balloon to verify that the default test summary
output sends the right output for the buildbot issue detection script.
The effect of this change will be reverted after verifying the testbot
behavior. This change will not stay in as is and will knowingly create
noise, see this thread:
http://lists.llvm.org/pipermail/lldb-dev/2015-December/009048.html
llvm-svn: 255131
The results formatter system is now fed timeouts and exceptional process
exits (i.e. inferior dotest.py process that exited by signal on POSIX
systems).
If a timeout or exceptional exit happens while a test method is running
on the worker queue, the timeout or exceptional exit is charged and
reported against that test method. Otherwise, if no test method was
running at the time of the timeout or exceptional exit, only the test
filename will be reported as the TIMEOUT or ERROR.
Implements:
https://llvm.org/bugs/show_bug.cgi?id=24830https://llvm.org/bugs/show_bug.cgi?id=25703
In support of:
https://llvm.org/bugs/show_bug.cgi?id=25450
llvm-svn: 255097
This seems to be a legacy relic from days gone by where the
remote test suite runner operated completely differently than it
does today. git blames and comments traced this functionality
back to about 2012, and nobody seems to know anything about it
now.
llvm-svn: 255060
This removes the option to exclude a single directory. This is
part of an effort to remove unused options and cleanup the interface
to the test suite.
llvm-svn: 255048
The standard remote debugging workflow with gdb is to start the
application on the remote host under gdbserver (e.g.: gdbserver :5039
a.out) and then connect to it with gdb.
The same workflow is supported by debugserver/lldb-gdbserver with a very
similar syntax but to access all features of lldb we need to be
connected also to an lldb-platform instance running on the target.
Before this change this had to be done manually with starting a separate
lldb-platform on the target machine and then connecting to it with lldb
before connecting to the process.
This change modifies the behavior of "platform connect" with
automatically connecting to the process instance if it was started by
the remote platform. With this command replacing gdbserver in a gdb
based worflow is usually as simple as replacing the command to execute
gdbserver with executing lldb-platform.
Differential revision: http://reviews.llvm.org/D14952
llvm-svn: 255016
This change introduce 3 different working mode for Platform::LoadImage
depending on the file specs specified.
* If only a remote file is specified then the remote file is loaded on
the target (same behavior as before)
* If only a local file is specified then the local file is installed to
the current working directory and then loaded from there.
* If both local and remote file is specified then the local file is
installed to the specified location and then loaded from there.
The same options are exposed on the SB API with a new method LoadImage
method while the old signature presers its meaning.
On the command line the installation of the shared library can be specified
with the "--install" option of "process load".
Differential revision: http://reviews.llvm.org/D15152
llvm-svn: 255014
This moves all the global variables into a separate module called
`configuration`. This has a number of advantages:
1. Configuration data is centrally maintained so it's easy to get
a high level overview of what configuration data the test suite
makes use of.
2. The method of sharing configuration data among different parts
of the test suite becomes standardized. Previously we would
put some things into the `lldb` module, some things into the
`lldbtest_config` module, and some things would not get shared.
Now everything is shared through one module and is available to
the entire test suite.
3. It opens the door to moving some of the initialization code into
the `configuration` module, simplifying the implementation of
`dotest.py`.
There are a few stragglers that didn't get converted over to using
the `configuration` module in this patch, because it would have grown
the size of the patch unnecessarily. This includes everything
currently in the `lldbtest_config` module, as well as the
`lldb.remote_platform` variable. We can address these in the future.
llvm-svn: 254982
It was previously reverted due to issues that showed up only on linux. I was able to reproduce these issues and fix the underlying cause.
So this is the same patch as 254476 with the following two fixes:
- Fix not trying to complete classes that don't have external sources
- Fix ClangASTSource::CompleteType() to check the decl context of types that it finds by basename to ensure we don't complete a type "S" with a type like "std::S". Before this fix ClangASTSource::CompleteType() would accept _any_ type that had a matching basename and copy it into the other type.
<rdar://problem/22992457>
llvm-svn: 254980
This cleans up dotest.py and is a pre-step for getting
the test inferior runner to send post-inferior run events
to the events collector, as this code needs to be accessed
from within dosep.py.
llvm-svn: 254979
Summary:
The base make(1) on NetBSD is BSD make.
In the default installation of NetBSD GNU make comes via pkgsrc under the gmake name.
Reviewers: emaste, tfiala, clayborg
Subscribers: joerg, lldb-commits
Differential Revision: http://reviews.llvm.org/D15261
llvm-svn: 254947
There is already a class called LLDBTestResults which I would like
to move into a separate file, but the most appropriate filename
was taken.
llvm-svn: 254946
Summary:
The getwd() and getcwd() functions conform to IEEE Std 1003.1-1990
(POSIX.1). The IEEE Std 1003.1-2004 (POSIX.1) revision marked
getwd() as legacy and recommended the use of getcwd() instead. The IEEE
Std 1003.1-2008 (``POSIX.1'') revision removed getwd() from the
specification.
The ability to specify a NULL pointer and have getcwd() allocate memory
as necessary is an extension.
The getwd() function appeared in 4.0BSD.
Reviewers: emaste, tfiala, clayborg
Subscribers: lldb-commits, joerg
Differential Revision: http://reviews.llvm.org/D15260
llvm-svn: 254944
Allow both '-var-list-children var0' and '-var-list-children "var0"' to be used with the -var-list-children command. GDB MI allows for this and it is necessary if the variable name contains spaces, such as var5.std::_Vector_base<std::basic_string<char, std::char_traits<char>, std::allocator<char> >, std::allocator<std::basic_string<char, std::char_traits<char>, std::allocator<cahr> > > >.
Differential Revision: http://reviews.llvm.org/D15168
llvm-svn: 254941
This is a resubmit of r254403, see that commit's message for context. This fixes an issue in the
original commit, where we would incorrectly interrupt the process if the interrupt request came
just as we were about to send the stopped event to the public.
llvm-svn: 254902
Summary:
Because of the large number of XFAILs TestThreadStates has decayed quite a bit. This commit does
the following:
- removes the "breakpoint list" expectations. Most tests have been failing on this, because the
command output changed quite a while back. I remove it, because run_break_set_by_file_and_line
already does a decent amount of checking
- fixup test_state_after_expression: this was calling the wrong function by mistake. As now the
function actually tests something (which we know is broken), I needed to XFAIL it as well.
- replaces the sleep() with a proper wait-for-event functionality in parts which use async mode,
to stabilize the one function that actually tests something.
Reviewers: clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D15233
llvm-svn: 254901
Test summary counts now show at the end, with issue details
above.
Issue details now print "ISSUE_TYPE: test method (relative path)".
Relative paths are relative to the
packages/Python/lldbsuite/test directory.
Sample output:
test/dotest.py --executable `pwd`/build/Debug/lldb --results-formatter lldbsuite.test.basic_results_formatter.BasicResultsFormatter --threads 12
Testing: 415 test suites, 12 threads
415 out of 415 test suites processed - TestLldbGdbServer.py
Test Results
Total Test Methods Run (excluding reruns): 2470
Test Method rerun count: 0
Details:
UNEXPECTED SUCCESS: test_symbol_name_dsym (functionalities/completion/TestCompletion.py)
UNEXPECTED SUCCESS: test_symbol_name_dwarf (functionalities/completion/TestCompletion.py)
===================
Test Result Summary
===================
Success: 1329
Expected Failure: 79
Failure: 0
Error: 0
Unexpected Success: 2
Skip: 1060
llvm-svn: 254890
Summary: This is used in tests.
Reviewers: emaste, tfiala, clayborg
Subscribers: zturner, lldb-commits, joerg
Differential Revision: http://reviews.llvm.org/D15065
llvm-svn: 254853
Patch by Nitesh Jain.
Summary: There is no debug information generated for variable index with –O3 optimization flag. The DW_AT_location tag in DWARF debug_info section is empty.
Reviewers: ovyalov, clayborg
Subscribers: lldb-commits, mohit.bhakkad, sagar, bhushan, jaydeep
Differential: http://reviews.llvm.org/D15224
llvm-svn: 254850
This test would fail before if conditional breakpoints weren't
working correctly, and the nature of the test (spinning up 10
threads, etc) opens the door to raciness.
This patch vastly simplifies the test, removes the need for relying
on conditional expression evaluation, and as a result makes the
correctness of the test vastly easier to reason about and reduces
flakiness.
Differential Revision: http://reviews.llvm.org/D15241
Reviewed By: Jim Ingham
llvm-svn: 254792
SUMMARY:
Marked TestCrashDuringStep.py as XFAIL for MIPS. The test generates IO error due to breakpoint at invalid address.
Reviewers: clayborg, labath
Subscribers: nitesh.jain, mohit.bhakkad, sagar, bhushan and lldb-commits
Differential Revision: http://reviews.llvm.org/D15182
llvm-svn: 254710
Previously we used sys.os.path for appending target pathes what failed
when cased dlopen to fail on the target because of the '\'.
The fix won't work for local Windows tests but dlopen don't available
on Windows anyway so the test don't make sense in that context.
llvm-svn: 254602
Also cleans up some usages of strings where symbolic names
were safer and made more sense.
Try a test run with something like this to check out the new
basic results formatter (not used by default):
time test/dotest.py --executable `pwd`/build/Debug/lldb --results-formatter lldbsuite.test.basic_results_formatter.BasicResultsFormatter --results-file stdout
This will yield something like:
Testing: 1 test suites, 8 threads
1 out of 1 test suites processed - TestHelp.py
Test Results
Total Test Methods Run (excluding reruns): 13
Test Method rerun count: 0
===================
Test Result Summary
===================
Success: 13
Expected Failure: 0
Failure: 0
Error: 0
Unexpected Success: 0
Skip: 0
Whereas something with a bit of error will look more like this:
42 out of 42 test suites processed - TestSymbolTable.py
Test Results
Total Test Methods Run (excluding reruns): 166
Test Method rerun count: 0
===================
Test Result Summary
===================
Success: 93
Expected Failure: 10
Failure: 2
Error: 2
Unexpected Success: 0
Skip: 59
Details:
FAIL:
TestModulesInlineFunctions.ModulesInlineFunctionsTestCase.test_expr_dsym
(/Users/tfiala/work/lldb-tot/git-svn/lldb/packages/Python/lldbsuite/test/lang/objc/modules-inline-functions/TestModulesInlineFunctions.py)
FAIL:
TestModulesInlineFunctions.ModulesInlineFunctionsTestCase.test_expr_dwarf
(/Users/tfiala/work/lldb-tot/git-svn/lldb/packages/Python/lldbsuite/test/lang/objc/modules-inline-functions/TestModulesInlineFunctions.py)
ERROR: TestObjCCheckers.ObjCCheckerTestCase.test_objc_checker_dsym
(/Users/tfiala/work/lldb-tot/git-svn/lldb/packages/Python/lldbsuite/test/lang/objc/objc-checker/TestObjCCheckers.py)
ERROR: TestObjCCheckers.ObjCCheckerTestCase.test_objc_checker_dwarf
(/Users/tfiala/work/lldb-tot/git-svn/lldb/packages/Python/lldbsuite/test/lang/objc/objc-checker/TestObjCCheckers.py)
The Details header only prints if there are any issues to report. The
Details section has tags that should get picked up using the normal
issue text scrapers (e.g. buildbot).
Test numbers reported are strictly test method runs.
The rerun bit at the top is in support of the multi-pass test
runner code (to run the low-load, single worker test pass for
tests that failed the first run), which I'll be able to put up
for review after this.
ResultsFormatters now have the ability to indicate they replace
the legacy summary, as this one does.
Once we come to agreement on the exact format, I will switch
us over to using this by default.
llvm-svn: 254530
On android the symbols exposed by libdl (dlopen, dlclose, dlerror)
prefixed by "__dl_". This change moves the handling of process
load/unload to the platform object and override it for android to
handle the special prefix.
Differential revision: http://reviews.llvm.org/D11465
llvm-svn: 254504
Summary:
- Problem occurs when:
-- 32-bit inferiors run on x86_32 machine and
the architecture doesn't have AVX feature
-- This causes FPRType to be set to eFPRTypeFXSAVE
-- PTRACE_GETFPREGS was being used to read FXSAVE area
-- For 32-bit inferiors running on x86_32 machine,
PTRACE_GETFPREGS reads FSAVE area and not FXSAVE area
- Changed ptrace API to PTRACE_GETREGSET for 32-bit inferiors
-- This reads FPR data in FXSAVE format.
-- For 64-bit inferiors, no change has been made.
- Modified XFAIL for TestReturnValue.py
-- Earlier, this test was passing for Linux OS
-- Now, it passes for Android OS as well
Change-Id: Ieed72bc969b79516fc7b263b32493aa1e7a1a2ac
Signed-off-by: Abhishek Aggarwal <abhishek.a.aggarwal@intel.com>
Reviewers: ovyalov, jingham, lldb-commits, tberghammer, labath
Subscribers: jevinskie, labath, tberghammer, danalbert
Differential Revision: http://reviews.llvm.org/D15042
llvm-svn: 254499
This is done by finding the types that are forward declarations that come from a module, and loading that module's debug info in a separate lldb_private::Module, and copying the type over into the current module using a ClangASTImporter object. ClangASTImporter objects are already used to copy types from on clang::ASTContext to another for expressions so the type copying code has been around for a while.
A new FindTypes variant was added to SymbolVendor and SymbolFile:
size_t
SymbolVendor::FindTypes (const std::vector<CompilerContext> &context, bool append, TypeMap& types);
size_t
SymbolVendor::FindTypes (const std::vector<CompilerContext> &context, bool append, TypeMap& types);
The CompilerContext is a way to represent the exact context of a type and pass it through an agnostic API boundary so that we can find that exact context elsewhere in another file. This was required here because we can have a module that has submodules, both of which have a "foo" type.
I am not able to add tests for this yet as we currently don't build our C/C++/ObjC binaries with the clang binary that we build. There are some driver issues where it can't find the header files for the C and C++ standard library which makes compiling these tests hard. We can't also guarantee that if we are building with clang that it supporst the exact format of -gmodule debugging that we are trying to test. We have had other versions of clang that had a different implementation of -gmodule debugging that we are no longer supporting, so we can't enable tests if we are building with clang without compiling something and looking at the structure of the DWARF that was generated to ensure that it is the format we can actually use.
llvm-svn: 254476
Summary:
The following situation was occuring in TestAttachResume:
- we did a "continue" from a breakpoint (which involves a private start-stop to step over the
breakpoint)
- after receiving the stop-reply from the step-over, we issue a "detach" (which requires a
process interrupt)
- at this moment, the public state is "running", private state is "about-to-be-stopped" (the
stopped event was broadcast, but it was not received yet)
- StopForDestroyOrDetach (public thread) notes the public state is running, sends an interrupt
request to the private thread
- private thread gets the eBroadcastBitInterrupt (before the eStateStopped message), and asks the
process plugin to stop (via Halt())
- process plugin says it has nothing to do as the process is already stopped
- private thread shrugs and carries on. receives the stop event, restores the breakpoint and
resumes the process.
- after a while, the public thread times out and says it failed to stop the process
This patch does the following:
- splits Halt() into two functions, private and public, their usage depends on the context
- public Halt(): sends eBroadcastBitInterrupt to the private thread and waits for the Stop
event
- HaltPrivate(): asks the plugin to stop and makes a note that the halt was requested. When the
next stop event comes it sets the interrupt flag on it.
- removes HijackPrivateProcessEvents(), as the only user (old Halt()) has gone away
- removes the m_currently_handling_event hack, as the new Halt() does not need it
- adds a use_run_lock parameter to public Halt() and WaitForProcessToStop(). This was needed
because RunThreadPlan uses Halt() while holding the run lock and we don't want Halt() to take
it away from him.
Reviewers: clayborg, jingham
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D14989
llvm-svn: 254403
SUMMARY:
For MIPS, ARCH is specified without m.
Reviewers: clayborg
Subscribers: nitesh.jain, mohit.bhakkad, sagar, bhushan and lldb-commits
Differential Revision: http://reviews.llvm.org/D14978
llvm-svn: 254376
These tests were fixed by r253026 but they was failing on the linux
build bot because of a system setup problem. Remove xfail from them
after we fixed the build bot.
llvm-svn: 254163
With this patch, the client will package up all the required
inputs into a compressed zip file, establish a connection to the
server, send the input to the server, and wait for the server to
send a response (in this case the response is just echoed back to
the client).
This gets the network communication in place, and in a subsequent
patch I will follow up with the code that actually runs swig on
the server and sends back the output instead of echoing back the
input.
llvm-svn: 254023
This test was already expectedFlakeyLinux for occasional failures on the
Linux buildbot. It seems the new FreeBSD buildbot fails the same way on
occasion.
llvm.org/pr25172
llvm-svn: 254002
This passes on my FreeBSD stable/10 desktop and my new FreeBSD
11-current buildbot (which is not yet hooked up to the buildmaster).
llvm.org/pr18190
llvm-svn: 254000
Summary:
This reverts commit 251965377bdfb6227eea42c12a792c059e4e8a4b
as a test marked "skipIf(compiler='gcc')" runs when testing with GCC.
Reviewers: amccarth
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D14852
llvm-svn: 253631
-fms-compatibility-version defaults to VS 2013. When using
VS 2015, this will lead to compilation failures of the test
inferiors in the C++ standard library for language conformance
reasons.
The fix here is to simply pass -fms-compatibility-version=19.0 when
we detect that a VS 2015 compiler is present. Even though we're
actually using clang to do the compilation, clang uses this same
detection algorithm to determine the location of the standard
library. So this check is tantanmount to saying "If clang is going
to find MSVC 2015's standard library, then pass 19.0 for
-fms-compatibility-version.
llvm-svn: 253589
This patch fixes two issues:
1) Popen needs to be used with universal_newlines=True by default.
This elicits automatic decoding from bytes -> string in Py3,
and has no negative effects in other Py versions.
2) The swig typemaps for converting between string and (char*, int)
did not work correctly when the length of the string was 0,
indicating an error. In this case we would try to construct a
string from uninitialized data.
3) Ironically, the bug mentioned in #2 led to a test passing on
Windows that was actually broken, because the test was written
such that the assertion was never even getting checked, so it
passed by default. So we additionally fix this test to also
fail if the method errors. By fixing this test it's now broken
on Windows, so we also xfail it.
llvm-svn: 253487
Patch by Nitesh Jain
Summary: The self.getArchitecture() returns the architecture based on the value of -A flag passed to dotest.py script.
There are many possible values for MIPS to this option (like mips32r2, mips32r6, mips64, mips64r2,.... ).
This patch uses re.match(mips,arch) to check if architecture string starts with mips.
Subscribers: lldb-commits, mohit.bhakkad, sagar, bhushan, jaydeep
Reviewers: clayborg, ovyalov
Differential: http://reviews.llvm.org/D14493
llvm-svn: 253444
breakpoint as "file address" so that the address breakpoint will track that
module even if it gets loaded in a different place. Also fixed the Address
breakpoint resolver so that it handles this tracking correctly.
llvm-svn: 253308
Current versions of SWIG have a bug with Python 3 that causes
Python to assert when iterating over a generator. This patch
skips the test for the right combination of Python version and
SWIG version. I'm attempting to upstream a patch to SWIG to
fix this in a subsequent as-of-yet unreleased version, but
I don't know how long that will take.
llvm-svn: 253273
Change Test-rdar-12481949.py to expect GetValueAsUnsigned() to return
0xffffffff if the variable is an int32_t (signed, 4 byte integer) with
value of -1. The previous expectation where we expected the value to be
0xffffffffffffffff doesn't make sense as nothing explains why we would
treat it as an 8 byte value.
This CL also removes a hack from Scalar::ULongLong what was most likely
added to get this test passing as it only worked in case the value of
the variable is -1 and didn't make any sense even in that case.
Differential revision: http://reviews.llvm.org/D14611
llvm-svn: 253027
Summary:
- Reason of both bugs:
1. For the very first frame, Unwinder doesn't check the validity
of Full UnwindPlan before creating StackFrame from it:
When 'process launch' command is run after setting a breakpoint
in inferior, the Unwinder runs and saves only Frame 0 (the frame
in which breakpoint was set) in thread's StackFrameList i.e.
m_curr_frames_sp. However, it doesn't check the validity of the
Full UnwindPlan for this frame by unwinding 2 more frames further.
2. Unwinder doesn't update the CFA value of Cursor when Full UnwindPlan
fails and FallBack UnwindPlan succeeds in providing valid CFA values
for frames:
Sometimes during unwinding of stack frames, the Full UnwindPlan
inside the RegisterContextLLDB object may fail to provide valid
CFA values for these frames. Then the Fallback UnwindPlan is used
to unwind the frames.
If the Fallback UnwindPlan succeeds, then it provides a valid new
CFA value. The RegisterContextLLDB::m_cfa field of Cursor object
is updated during the Fallback UnwindPlan execution. However,
UnwindLLDB misses the implementation to update the 'cfa' field
of this Cursor with this valid new CFA value.
- This patch fixes both these issues.
- Remove XFAIL in test files corresponding to these 2 Bugs
Change-Id: I932ea407545ceee2d628f946ecc61a4806d4cc86
Signed-off-by: Abhishek Aggarwal <abhishek.a.aggarwal@intel.com>
Reviewers: jingham, lldb-commits, jasonmolenda
Subscribers: lldb-commits, ovyalov, tberghammer
Differential Revision: http://reviews.llvm.org/D14226
llvm-svn: 253026
This test fails most of the time when run under heavy load. The dsym
variant doesn't seem to be failing.
Tracking XFAIL marker with:
https://llvm.org/bugs/show_bug.cgi?id=25485
llvm-svn: 252702
They get treated as special RLE encoding symbols and packets get
corrupted. Most other packet types already know about this apparently,
but QEnvironment missed these two.
Should fix PR25300.
llvm-svn: 252521
For language that support such a thing, this API allows to ask whether a type is anonymous (i.e. has been given no name)
Comes with test case
llvm-svn: 252390
This is unsupported in Python 3. This could also have been fixed
by using "wb" instead of "w", but it doesn't seem like writing the
session log absolutely *needs* to be unbuffered.
llvm-svn: 252381
instance:
break set -l c++ -r Name
will only break on C++ symbols that match Name, not ObjC or plain C symbols. This also works
for "break set -n" and there are SB API's to pass this as well.
llvm-svn: 252356
`sets.Set` has been deprecated in favor of `set` since 2.6, and
`string.maketrans` has to be special cased. In Python 3 there
is `str.maketrans`, `bytes.maketrans`, and `bytearray.maketrans`
and you have to choose the correct one. So we need to introduce
a runtime version check at this site.
llvm-svn: 252348
We tried implementing something akin to a conditionalExpectedFailure
decorator for unittest2. We did this by making use of some
implementation details of the unittest2 module. In an effort to make
this work with unittest, this patch removes the reliance on the
implementation details. I have a hard time wrapping my head around
how this all works with the deeply nested decorators, but the spirit
of the patch here is to do do the following: If the condition function
is true, use the original unittest2.expectedFailure decorator. Otherwise
don't use any decorator, just call the test function.
Differential Revision: http://reviews.llvm.org/D14406
Reviewed By: tberghammer, labath
llvm-svn: 252326
We still see "Too many file handles" errors on Windows even with
lower numbers of cores. It's not clear what the right balance is,
and the bar seems to move as more tests get added. So just use
the strategy that works until we can investigate more deeply.
llvm-svn: 252325
Absolute imports were introduced in Python 2.5 as a feature
(e.g. from __future__ import absolute_import), and made default
in Python 3.
When absolute imports are enabled, the import system changes in
a couple of ways:
1) The `import foo` syntax will *only* search sys.path. If `foo`
isn't in sys.path, it won't be found. Period. Without absolute
imports, the import system will also search the same directory
that the importing file resides in, so that you can easily
import from the same folder.
2) From inside a package, you can use a dot syntax to refer to higher
levels of the current package. For example, if you are in the
package lldbsuite.test.utility, then ..foo refers to
lldbsuite.test.foo. You can use this notation with the
`from X import Y` syntax to write intra-package references. For
example, using the previous locationa s a starting point, writing
`from ..support import seven` would import lldbsuite.support.seven
Since this is now the default behavior in Python 3, this means that
importing from the same directory with `import foo` *no longer works*.
As a result, the only way to have portable code is to force absolute
imports for all versions of Python.
See PEP 0328 [https://www.python.org/dev/peps/pep-0328/] for more
information about absolute and relative imports.
Differential Revision: http://reviews.llvm.org/D14342
Reviewed By: Todd Fiala
llvm-svn: 252191
It was deprecated even in 2.7, but not removed until 3.x. os.walk
provides all of the same functionality and is the correct way to
do this now.
llvm-svn: 252127
This follows the spirit of a previous patch which did essentially
the same thing. In Python 3, when you use Popen.communicate(),
you get back a bytes object which cannot normally be treated as
a string. We could decode this manually, but universal_newlines=True
does this automatically, and there's no disadvantage to doing so
even on Python 2. So just enable it always.
llvm-svn: 252126
This allows for command-line debugging of iOS simulator binaries (as long as UI is not required, or a full UI simulator has previously been otherwise launched), as well as execution of the LLDB test suite on the iOS simulator
This is known to compile on OSX 10.11 GM - feedback from people on other platforms and/or older versions of OSX as to the buildability of this code is greatly appreciated
llvm-svn: 252112
Python 3 introduces the `timeout` keyword argument on Popen.wait().
If our patched version doesn't support keyword arguments, then when
the internal Python implementation attempts to call wait() with the
keyword argument, things will explode.
Such as my head, after I finally figured out what was happening.
llvm-svn: 252092
By default in Python 3, check_output() returns a program's output as
an encoded byte sequence. This means it returns a Py3 `bytes` object,
which cannot be compared to a string since it's a different fundamental
type.
Although it might not be correct from a purist standpoint, from a
practical one we can assume that all output is encoded in the default
locale, in which case using universal_newlines=True will decode it
according to the current locale. Anyway, universal_newlines also
has the nice behavior that it converts \r\n to \n on Windows platforms
so this makes parsing code easier, should we need that. So it seems
like a win/win.
llvm-svn: 252025
This module was originally intended to be imported by top-level
scripts to be able to find the LLDB packages and third party
libraries. Packages themselves shouldn't need to import it,
because by the time it gets into the package, the top-level
script should have already done this. Indeed, it was just
adding the same values to sys.path multiple times, so this
patch is essentially no functional change.
To make sure it doesn't get re-introduced, we also delete the
`use_lldb_suite` module from `lldbsuite/test`, although the
original copy still remains in `lldb/test`
llvm-svn: 251963
The `commands` module was deprecated in 2.7 and removed in 3.x.
As a workaround, we introduce a new module `seven` in
lldbsuite.support, and write helper functions in there that delegate
to the commands module if it is available, and re-implement their
functionality for cases where it is not available.
llvm-svn: 251959
Summary:
The code which was preventing the usage of the OS plugin while detach is in
progress also prevented us to update the thread list correctly. This resulted
in an empty thread list, which confused the detaching logic. Change the
condition do only do what it says (disable the usage of the OS plugin).
Reviewers: clayborg, jingham
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D14201
llvm-svn: 251932
Summary:
The solution to bug 24074,rL249673 needed
to parse the function information from the Dwarf in order
to set the SymbolContext. For that, GetFunction was called
for the parent in GetTypeForDIE, which parses the
ChildParameters and in the flow, GetTypeForDIE was called
for one of the sibling die and so an infinite
loop was triggered by calling GetFunction repeatedly for the
same function.
The changes in this revision modify the GetTypeForDIE to only
resolve the function context in the Type Lookup flow and so
prevent the infinite loop.
A testcase has also been added to check for regression in the
future and a test vector had been added to the testcase of
24074.
Reviewers: jingham, tberghammer, clayborg
Differential Revision: http://reviews.llvm.org/D14202
llvm-svn: 251917
For convenience, we had added the folder that dotest.py was in
to sys.path, so that we could easily write things like
`import lldbutil` from anywhere and any test. This introduces
a subtle problem when using Python's package system, because when
unittest2 imports a particular test suite, the test suite is detached
from the package. Thus, writing "import lldbutil" from dotest imports
it as part of the package, and writing the same line from a test
does a fresh import since the importing module was not part of
the same package.
The real way to fix this is to use absolute imports everywhere. Instead
of writing "import lldbutil", we need to write "import
lldbsuite.test.util". This patch fixes up that and all other similar
cases, and additionally removes the script directory from sys.path
to ensure that this can't happen again.
llvm-svn: 251886
I think the underlying problem was fixed by r251819, but I can't
reproduce the problem. So this is to check whether it does in
fact fix the problem.
llvm-svn: 251822
packages/Python/lldbsuite is now a Python package, and it relies
on its __init__.py being called to do package-level initialization.
If you exec packages/Python/lldbsuite/dotest.py directly, you won't
get this package level initialization, and things will fail. But
without this patch, this is exactly what dosep itself does. To
launch the multi-processing fork, it was hardcoding a path to
dotest.py and exec'ing it from inside the package.
The fix here is to get the path of the top-level script, and
then exec'ing that instead. A more robust solution would involve
refactoring the code so that dosep execs some internal script that
imports lldbsuite, but that's a bit more involved.
Differential Revision: http://reviews.llvm.org/D14157
Reviewed by: Todd Fiala
llvm-svn: 251819
Summary:
As per the following link, the "--" separator can appear between the options
and parameters of any MI command. Previously this separator was only
handled by the `-data-disassemble` MI command. I have moved the relevant
code into `CMICmdBase` so that any MI command can handle the
aforementioned separator.
https://sourceware.org/gdb/onlinedocs/gdb/GDB_002fMI-Input-Syntax.html#GDB_002fMI-Input-Syntax
Reviewers: ki.stfu
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D14197
llvm-svn: 251793
I don't think anything has changed recently - the test was always flaky, but
only very rarely. Still, it is causing noise in the buildbots.
llvm-svn: 251699
It turns out that lldbtest_config was being imported locally to "lldbsuite.test" instead of globally, so when the test cases got individually brought by a global import via __import__ by unittest2, they did not see the lldbtest_config import, and ended up importing a new separate copy of it, with lldbExec unset
This is a simple hackaround that brings lldbtest_config to global visibility and makes sure the configuration data is correctly shared
llvm-svn: 251678
Summary:
I observed that eclipse was passing --thread-group for many other commands
then we are currently handling. Looking at the MI documentation, the
following link states that each MI command accept the --thread and
--frame option. Looking at the GDB implementation, it seems that apart
from these 2, --thread-group is also handled the same way.
https://sourceware.org/gdb/onlinedocs/gdb/Context-management.html#Context-management
So instead of handling those arguments in every comamnds, I have moved
them into the base class and removed them from elsewhere. Now any command
can use these arguments. The patch seems big but most of the changes are
mechanical.
Reviewers: ki.stfu
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D14177
llvm-svn: 251636
The test was verifying that the pid of the child is not equal to its process
group by searching for text substrings. This failed in the rare cases when the
pid actually *was* a substring of the process group (even though they were not
equal).
Change the test to use SB API and do proper numeric comparisons.
llvm-svn: 251626
This is the conclusion of an effort to get LLDB's Python code
structured into a bona-fide Python package. This has a number
of benefits, but most notably the ability to more easily share
Python code between different but related pieces of LLDB's Python
infrastructure (for example, `scripts` can now share code with
`test`).
llvm-svn: 251532
The idea behind this patch is to expose the meat of
LLDB's Python infrastructure (test suite, scripts, etc)
as a single package. This makes reusability and code
sharing among sub-packages easy.
Differential Revision: http://reviews.llvm.org/D14131
llvm-svn: 251460
Zachary Turner