This is intended to be used for ThinLTO incremental build.
Differential Revision: http://reviews.llvm.org/D18213
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 265095
http://pubs.opengroup.org/onlinepubs/9699919799/utilities/nm.html .
1) For Mach-O files the code was not printing the values in hex as is the default.
2) The values printed had leading zeros which they should not have.
3) The address for undefined symbols was printed as spaces instead of 0.
4) With the -A option with posix output for an archive did not use square
brackets around the archive member name.
rdar://25311883 and rdar://25299678
llvm-svn: 264778
Personality is copied as part of copyFunctionAttributes, but it is
invalid on a declaration. Remove the personality attribute it the
function body is not cloned.
Also add a verifier run over output modules in the llvm-split tool.
llvm-svn: 264667
A DICompileUnit that is not listed in llvm.dbg.cu will cause assertion
failures and/or crashes in the backend. The Verifier should reject this.
rdar://problem/25369499
llvm-svn: 264657
Spiritually reapply commit r264409 (reverted in r264410), albeit with a
bit of a redesign.
Firstly, avoid splitting the big blob into multiple chunks of strings.
r264409 imposed an arbitrary limit to avoid a massive allocation on the
shared 'Record' SmallVector. The bug with that commit only reproduced
when there were more than "chunk-size" strings. A test for this would
have been useless long-term, since we're liable to adjust the chunk-size
in the future.
Thus, eliminate the motivation for chunk-ing by storing the string sizes
in the blob. Here's the layout:
vbr6: # of strings
vbr6: offset-to-blob
blob:
[vbr6]: string lengths
[char]: concatenated strings
Secondly, make the output of llvm-bcanalyzer readable.
I noticed when debugging r264409 that llvm-bcanalyzer was outputting a
massive blob all in one line. Past a small number, the strings were
impossible to split in my head, and the lines were way too long. This
version adds support in llvm-bcanalyzer for pretty-printing.
<STRINGS abbrevid=4 op0=3 op1=9/> num-strings = 3 {
'abc'
'def'
'ghi'
}
From the original commit:
Inspired by Mehdi's similar patch, http://reviews.llvm.org/D18342, this
should (a) slightly reduce bitcode size, since there is less record
overhead, and (b) greatly improve reading speed, since blobs are super
cheap to deserialize.
llvm-svn: 264551
If you're building dwps from other dwps, it can be hard to track down a
duplicate CU ID if it comes from two compilations of the same file in
different modes, etc. By including the .dwo path (which is hopefully
more unique than the file path) it can help track down where the
duplicates came from.
llvm-svn: 264520
Optimize output of MDStrings in bitcode. This emits them in big blocks
(currently 1024) in a pair of records:
- BULK_STRING_SIZES: the sizes of the strings in the block, and
- BULK_STRING_DATA: a single blob, which is the concatenation of all
the strings.
Inspired by Mehdi's similar patch, http://reviews.llvm.org/D18342, this
should (a) slightly reduce bitcode size, since there is less record
overhead, and (b) greatly improve reading speed, since blobs are super
cheap to deserialize.
I needed to add support for blobs to streaming input to get the test
suite passing.
- StreamingMemoryObject::getPointer reads ahead and returns the
address of the blob.
- To avoid a possible reallocation of StreamingMemoryObject::Bytes,
BitstreamCursor::readRecord needs to move the call to JumpToEnd
forward so that getPointer is the last bitstream operation.
llvm-svn: 264409
The motivation for MODULE_CODE_METADATA_VALUES was to enable an
-flto=thin scheme where:
1. First, one function is cherry-picked from a bitcode file.
2. Later, another function is cherry-picked.
3. Later, ...
4. Finally, the metadata needed by all the previous functions is
loaded.
This was abandoned in favour of:
1. Calculate the superset of functions needed from a Module.
2. Link all functions at once.
Delayed metadata reading no longer serves a purpose. It also adds
a few complication, since we can't count on metadata being properly
parsed when exiting the BitcodeReader. After discussing with Teresa, we
agreed to remove it.
The code that depended on this was removed/updated in r264326.
llvm-svn: 264378
Going to be reading the DW_AT_GNU_dwo_name shortly as well, and there
was already enough duplication here that it was worth refactoring
rather than adding even more.
llvm-svn: 264350
Summary:
Using leading zeroes allows you to search for "000%" to find non-covered
items.
Differential Revision: http://reviews.llvm.org/D18420
llvm-svn: 264336
Summary:
Use bulk importing so we can avoid the use of post-pass metadata
linking. Cloned the ModuleLazyLoaderCache from the FunctionImport pass
to facilitate this.
Reviewers: joker.eph
Subscribers: dexonsmith, llvm-commits, joker.eph
Differential Revision: http://reviews.llvm.org/D18455
llvm-svn: 264326
The patch supports common STV_xxx visibility flags and MIPS specific
STO_MIPS_xxx flags.
Differential Revision: http://reviews.llvm.org/D18447
llvm-svn: 264300
in the test suite. While this is not really an interesting tool and option to run
on a Mach-O file to show the symbol table in a generic libObject format
it shouldn’t crash.
The reason for the crash was in MachOObjectFile::getSymbolType() when it was
calling MachOObjectFile::getSymbolSection() without checking its return value
for the error case.
What makes this fix require a fair bit of diffs is that the method getSymbolType() is
in the class ObjectFile defined without an ErrorOr<> so I needed to add that all
the sub classes. And all of the uses needed to be updated and the return value
needed to be checked for the error case.
The MachOObjectFile version of getSymbolType() “can” get an error in trying to
come up with the libObject’s internal SymbolRef::Type when the Mach-O symbol
symbol type is an N_SECT type because the code is trying to select from the
SymbolRef::ST_Data or SymbolRef::ST_Function values for the SymbolRef::Type.
And it needs the Mach-O section to use isData() and isBSS to determine if
it will return SymbolRef::ST_Data.
One other possible fix I considered is to simply return SymbolRef::ST_Other
when MachOObjectFile::getSymbolSection() returned an error. But since in
the past when I did such changes that “ate an error in the libObject code” I
was asked instead to push the error out of the libObject code I chose not
to implement the fix this way.
As currently written both the COFF and ELF versions of getSymbolType()
can’t get an error. But if isReservedSectionNumber() wanted to check for
the two known negative values rather than allowing all negative values or
the code wanted to add the same check as in getSymbolAddress() to use
getSection() and check for the error then these versions of getSymbolType()
could return errors.
At the end of the day the error printed now is the generic “Invalid data was
encountered while parsing the file” for object_error::parse_failed. In the
future when we thread Lang’s new TypedError for recoverable error handling
though libObject this will improve. And where the added // Diagnostic(…
comment is, it would be changed to produce and error message
like “bad section index (42) for symbol at index 8” for this case.
llvm-svn: 264187
MCContext shouldn't be accessing the filesystem - that's a gross
layering violation and makes it awkward to use as a library or in a
daemon where it may not even be allowed filesystem access.
The CWD lookup here is normally redundant anyway, since the calling
context either also looks up the CWD or sets this to something more
specific. Here, we fix up the one caller that doesn't already set up a
debug compilation dir and make it clear that the responsibility for
such set up is in the users of MCContext.
llvm-svn: 264109
In executable and shared object ELF files, relocations in the file contain the final virtual address rather than section offset so this is adjusted to display section offset.
Differential revision: http://reviews.llvm.org/D15965
llvm-svn: 263971
Summary: Also expose getters and setters in the C API, so that the change can be tested.
Reviewers: nhaehnle, axw, joker.eph
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D18260
From: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
llvm-svn: 263886
Summary:
ThinLTO is relying on linkInModule to import selected function.
However a lot of "magic" was hidden in linkInModule and the IRMover,
who would rename and promote global variables on the fly.
This is moving to an approach where the steps are decoupled and the
client is reponsible to specify the list of globals to import.
As a consequence some test are changed because they were relying on
the previous behavior which was importing the definition of *every*
single global without control on the client side.
Now the burden is on the client to decide if a global has to be imported
or not.
Reviewers: tejohnson
Subscribers: joker.eph, llvm-commits
Differential Revision: http://reviews.llvm.org/D18122
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 263863
On Rafael's suggestion!
(also fix a discrepancy between this error message format and the others)
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 263860
Now that the resolved path cache stores the StringRef's, its
best to just always cache the results, even when realpath isn't
used. This way we'll still avoid the StringMap hashing and lookup.
This also conveniently reorganises this code in a way I need for
a future patch.
llvm-svn: 263777
ResolvedPaths was storing std::string's as a cache. We would then take those strings and look them up in the internString pool to get a unique StringRef for each path.
This patch changes ResolvedPaths to store the StringRef pointing in to the internString pool itself. This way, when getResolvedPath returns a string, we know we have the StringRef we would find in the pool anyway. We can avoid the duplicate memory of the std::string's, and also the time from the lookup.
Unfortunately my profiles show no runtime change here, but it should still save memory allocations which is nice.
Reviewed by Frederic Riss.
Differential Revision: http://reviews.llvm.org/D18259
llvm-svn: 263774
It might be hard to recognize a hexadecimal number without '0x' prefix.
Besides that '0x' prefix corresponds to GNU objdump behaviour.
Differential Revision: http://reviews.llvm.org/D18207
llvm-svn: 263705
The section alignment field was marked optional but not provided a
default value: initialize it with 0.
While we are here, ensure that the section alignment is plausible.
llvm-svn: 263692
Annoyingly, ErrorOr allows to *not check* the error when things go
well. It will crash badly when there is an error though. It should
runtime assert when it is used without being checked!
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 263577
The PE TLS directory contains information about where the TLS data
resides in the image, what functions should be executed when threads are
created, etc.
llvm-svn: 263537
This patch adds support for the MachO .alt_entry assembly directive, and uses
it for global aliases with non-zero GEP offsets. The alt_entry flag indicates
that a symbol should be layed out immediately after the preceding symbol.
Conceptually it introduces an alternate entry point for a function or data
structure. E.g.:
safe_foo:
// check preconditions for foo
.alt_entry fast_foo
fast_foo:
// body of foo, can assume preconditions.
The .alt_entry flag is also implicitly set on assembly aliases of the form:
a = b + C
where C is a non-zero constant, since these have the same effect as an
alt_entry symbol: they introduce a label that cannot be moved relative to the
preceding one. Setting the alt_entry flag on aliases of this form fixes
http://llvm.org/PR25381.
llvm-svn: 263521
(Resubmitting after fixing missing file issue)
With the changes in r263275, there are now more than just functions in
the summary. Completed the renaming of data structures (started in
r263275) to reflect the wider scope. In particular, changed the
FunctionIndex* data structures to ModuleIndex*, and renamed related
variables and comments. Also renamed the files to reflect the changes.
A companion clang patch will immediately succeed this patch to reflect
this renaming.
llvm-svn: 263513
If anybody is actually using this, it probably doesn't do what they
think it does. This actually causes the dylib to *export* a
__cxa_atexit symbol, so anything that links it probably loses their
exit time destructors as well as disabling LLVM's.
This just removes the option entirely. If somebody does need this
behaviour we should figure out a more principled way to do it.
This is effectively a revert of r223805.
llvm-svn: 263498
Summary:
llvm-config --libs does not produce correct output since commit r260263
(llvm-config: Add preliminary Windows support) changed naming format of
the libraries. This patch updates llvm-config to recognize new naming
format and output correct linker flags.
Ref: https://llvm.org/bugs/show_bug.cgi?id=26581
Patch by Vedran Miletić
Reviewers: ehsan, rnk, pxli168
Subscribers: pxli168
Differential Revision: http://reviews.llvm.org/D17300
llvm-svn: 263497
With the changes in r263275, there are now more than just functions in
the summary. Completed the renaming of data structures (started in
r263275) to reflect the wider scope. In particular, changed the
FunctionIndex* data structures to ModuleIndex*, and renamed related
variables and comments. Also renamed the files to reflect the changes.
A companion clang patch will immediately succeed this patch to reflect
this renaming.
llvm-svn: 263490
Summary:
Caller can provides the list of .so files where some files are
unreadable (e.g linux-vdso.so.1). It's more convenient to handler this in
sancov with warning then making all callers to check files.
Reviewers: aizatsky
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D18103
llvm-svn: 263307
Summary:
This patch adds support for including a full reference graph including
call graph edges and other GV references in the summary.
The reference graph edges can be used to make importing decisions
without materializing any source modules, can be used in the plugin
to make file staging decisions for distributed build systems, and is
expected to have other uses.
The call graph edges are recorded in each function summary in the
bitcode via a list of <CalleeValueIds, StaticCount> tuples when no PGO
data exists, or <CalleeValueId, StaticCount, ProfileCount> pairs when
there is PGO, where the ValueId can be mapped to the function GUID via
the ValueSymbolTable. In the function index in memory, the call graph
edges reference the target via the CalleeGUID instead of the
CalleeValueId.
The reference graph edges are recorded in each summary record with a
list of referenced value IDs, which can be mapped to value GUID via the
ValueSymbolTable.
Addtionally, a new summary record type is added to record references
from global variable initializers. A number of bitcode records and data
structures have been renamed to reflect the newly expanded scope of the
summary beyond functions. More cleanup will follow.
Reviewers: joker.eph, davidxl
Subscribers: joker.eph, llvm-commits
Differential Revision: http://reviews.llvm.org/D17212
llvm-svn: 263275
This was originally a pointer to support pass managers which didn't use
AnalysisManagers. However, that doesn't realistically come up much and
the complexity of supporting it doesn't really make sense.
In fact, *many* parts of the pass manager were just assuming the pointer
was never null already. This at least makes it much more explicit and
clear.
llvm-svn: 263219
LLVM Gold plugin decides which instance of a common symbol it wants
based on the symbol size in claim_file_hook. If the file that
contains the chosen instance is later dropped from the link, we end
up with an undefined reference.
This change delays this decision until the set of the included files
is known.
llvm-svn: 263180
location in the opt tool to live along side the analysis in LLVM's
libraries.
No functionality changed here, but this will allow me to port the
printer to the new pass manager as well.
llvm-svn: 263101
opt adds Verifier passes in AddOptimizationPasses even if
-disable-verify is on. Fix it so that the extra verification occurs
either when (1) -disable-verifier is off, or (2) -verify-each is on.
Thanks to David Jones for pointing out this behavior!
llvm-svn: 263090
Summary:
This is intended to be a performance flag, on the same level as clang
cc1 option "--disable-free". LLVM will never initialize it by default,
it will be up to the client creating the LLVMContext to request this
behavior. Clang will do it by default in Release build (just like
--disable-free).
"opt" and "llc" can opt-in using -disable-named-value command line
option.
When performing LTO on llvm-tblgen, the initial merging of IR peaks
at 92MB without this patch, and 86MB after this patch,setNameImpl()
drops from 6.5MB to 0.5MB.
The total link time goes from ~29.5s to ~27.8s.
Compared to a compile-time flag (like the IRBuilder one), it performs
very close. I profiled on SROA and obtain these results:
420ms with IRBuilder that preserve name
372ms with IRBuilder that strip name
375ms with IRBuilder that preserve name, and a runtime flag to strip
Reviewers: chandlerc, dexonsmith, bogner
Subscribers: joker.eph, llvm-commits
Differential Revision: http://reviews.llvm.org/D17946
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 263086
It is a transitive dependency, so static build are OK but not build
with individual DSO for each LLVM library.
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 262987
This is intended to provide a parallel (threaded) ThinLTO scheme
for linker plugin use through the libLTO C API.
The intent of this patch is to provide a first implementation as a
proof-of-concept and allows linker to start supporting ThinLTO by
definiing the libLTO C API. Some part of the libLTO API are left
unimplemented yet. Following patches will add support for these.
The current implementation can link all clang/llvm binaries.
Differential Revision: http://reviews.llvm.org/D17066
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 262977
Summary: I left --build-system for backwards compat, in case there are scripts using it. Feel free to ask for its removal too.
Reviewers: chapuni, tstellarAMD
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D17886
llvm-svn: 262924
The split code gen task ID should not be appended to save-temps output
file when the parallelism factor is 1 (not actually splitting).
llvm-svn: 262731
Summary:
Since IR files are all compiled into separate independent object files
in ThinLTO mode, the prevailing linkonce symbols must be emitted in its
object file even if it is no longer referenced there, e.g. if no
references remain in the module after inlining, since it may be
referenced by another ThinLTO compiled object file. This is done by
changing LDPR_PREVAILING_DEF_IRONLY* symbols to LDPR_PREVAILING_DEF,
which converts the prevailing linkonce to weak. We also don't need the
other prevailing IRONLY handling for internalization, which is not
currently performed for ThinLTO.
Test case included.
Reviewers: davidxl, rafael
Subscribers: rafael, joker.eph, llvm-commits
Differential Revision: http://reviews.llvm.org/D16173
llvm-svn: 262727
Summary:
Launch ThinLTO backends (LTO and codegen pipelines with importing) in
parallel using a ThreadPool, after creating the combined index.
The number of threads is controlled by the existing -jobs gold plugin
option, or the hardware concurrency if not specified.
The old behavior of exiting after creating the combined index can be
invoked via a new thinlto-index-only plugin option.
This commit involves just the ThinLTO-specific pieces of D15390, the NFC
and other restructuring pieces were committed independently:
r262677: Add hardware_concurrency interface to llvm::thread (NFC)
r262719: Change split code gen to use ThreadPool
r262721: Refactor gold-plugin codegen to prepare for ThinLTO threads (NFC)
Reviewers: pcc, joker.eph, rafael
Subscribers: rafael, davidxl, llvm-commits, joker.eph
Differential Revision: http://reviews.llvm.org/D15390
llvm-svn: 262724
This is the NFC part remaining from D15390, which refactors the
current codegen() into a CodeGen class with various modular methods and
other helper functions that will be used by the follow-on ThinLTO piece.
llvm-svn: 262721
Gold has a newly added LDPT_GET_SYMBOLS_V3 callback that can
distinguish between a module that is not included in the link, and
one that is included but has its entire interface preempted by others.
Fixes PR26674.
llvm-svn: 262676
Function lto_module_create_in_local_context() would previously
rely on the default LLVMContext being created for it by
LTOModule::makeLTOModule(). This context exits the program on
error and is not arranged to update sLastStringError in
tools/lto/lto.cpp.
Function lto_module_create_in_local_context() now creates an
LLVMContext by itself, sets it up correctly to its needs and then
passes it to LTOModule::createInLocalContext() which takes
ownership of the context and keeps it present for the lifetime of
the returned LTOModule.
Function LTOModule::makeLTOModule() is modified to take a
reference to LLVMContext (instead of a pointer) and no longer
creates a default context when nullptr is passed to it. Method
LTOModule::createInContext() that takes a pointer to LLVMContext
is removed because it allows to pass a nullptr to it. Instead
LTOModule::createFromBuffer() (that takes a reference to
LLVMContext) should be used.
Differential Revision: http://reviews.llvm.org/D17715
llvm-svn: 262330
This is needed to connect dependencies between the LLVMgold plugin and the clang stage-2 builds due to limitations in ExternalProject_Add.
Patch by Mike Edwards
Differential Revision: http://reviews.llvm.org/D17655
llvm-svn: 262067
These diagnostics aren't perfect - in the case of merging several dwos
into dwps and those dwps into more dwps - just getting the message about
the original source file name might not be much help (since it's the
same in both dwos, by definition - but doesn't tell you which chain of
dwps to backtrack)
It might be worth adding the DW_AT_dwo_id to the split debug info to
improve the diagnostic experience - might help track down the duplicates
better.
llvm-svn: 261988
Though a bit odd, this is handy for a few reasons - for example, in a
build system that wants consistent input/output of build steps, but
where split-dwarf might be overriden/disabled by the user on a per-file
basis.
llvm-svn: 261987
This creates the new-style LoopPassManager and wires it up with dummy
and print passes.
This version doesn't support modifying the loop nest at all. It will
be far easier to discuss and evaluate the approaches to that with this
in place so that the boilerplate is out of the way.
llvm-svn: 261831
Figured this would be a problem, but didn't want to jump the gun - large
inputs demonstrate it pretty easily (mostly for type units, but might as
well do the same for CUs too). A random sample 6m27s -> 27s change.
Also, by checking this up-front for CUs (rather than when building the
cu_index) we can probably provide better error messages (see FIXMEs),
hopefully providing the name of the CUs rather than just their
signature.
llvm-svn: 261364
Summary:
This change adds 3 tables to html report:
- list of covered files with number of functions covered.
- list of not covered files
- list of not covered functions.
I tried to put most coverage-calculating functionality into
SourceCoverageData.
Differential Revision: http://reviews.llvm.org/D17421
llvm-svn: 261287
Summary: As per title. There was a lot of part missing in the C API, so I had to extend the invoke and landingpad API.
Reviewers: echristo, joker.eph, Wallbraker
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D17359
llvm-svn: 261254
This avoids a operator precedence warning for mixing + and | in an
expression. I checked that this matches the definition in the Split
DWARF proposal.
Patch by Cong Liu!
Differential Revision: http://reviews.llvm.org/D17375
llvm-svn: 261207
analysis passes, support pre-registering analyses, and use that to
implement parsing and pre-registering a custom alias analysis pipeline.
With this its possible to configure the particular alias analysis
pipeline used by the AAManager from the commandline of opt. I've updated
the test to show this effectively in use to build a pipeline including
basic-aa as part of it.
My big question for reviewers are around the APIs that are used to
expose this functionality. Are folks happy with pass-by-lambda to do
pass registration? Are folks happy with pre-registering analyses as
a way to inject customized instances of an analysis while still using
the registry for the general case?
Other thoughts of course welcome. The next round of patches will be to
add the rest of the alias analyses into the new pass manager and wire
them up here so that they can be used from opt. This will require
extending the (somewhate limited) functionality of AAManager w.r.t.
module passes.
Differential Revision: http://reviews.llvm.org/D17259
llvm-svn: 261197
Modify ProfileSummary class to make it not instrumented profile specific.
Add a new InstrumentedProfileSummary class that inherits from ProfileSummary.
Differential Revision: http://reviews.llvm.org/D17310
llvm-svn: 261119
The dynamic table is also an array of a fixed structure, so it can be
represented with a DynReginoInfo.
No major functionality change. The extra error checking is covered by
existing tests with a broken dynamic program header.
Idea extracted from r260488. I did the extra cleanups.
llvm-svn: 261107
We used to keep both a section and a pointer to the first symbol.
The oddity of keeping a section for dynamic symbols is because there is
a DT_SYMTAB but no DT_SYMTABZ, so to print the table we have to find the
size via a section table.
The reason for still keeping a pointer to the first symbol is because we
want to be able to print relocation tables even if the section table is
missing (it is mandatory only for files used in linking).
With this patch we keep just a DynRegionInfo. This then requires
changing a few places that were asking for a Elf_Shdr but actually just
needed the first symbol.
The test change is to delete the program header pointer.
Now that we use the information of both DT_SYMTAB and .dynsym, we don't
depend on the sh_entsize of .dynsym if we see DT_SYMTAB.
Note: It is questionable if it is worth it putting the effort to report
broken sh_entsize given that in files with no section table we have to
assume it is sizeof(Elf_Sym), but that is for another change.
Extracted from r260488.
llvm-svn: 261099
Original commit message:
[readobj] Dump DT_JMPREL relocations when outputting dynamic relocations.
The bits of r260488 it depends on have been committed.
llvm-svn: 260970
This requires making an error message a bit more generic, but that seems
a reasonable tradeoff.
Extracted from r260488 but simplified a bit.
llvm-svn: 260967
Original messages:
Revert "[readobj] Handle ELF files with no section table or with no program headers."
Revert "[readobj] Dump DT_JMPREL relocations when outputting dynamic relocations."
r260489 depends on r260488 and among other issues r260488 deleted error
handling code.
llvm-svn: 260962
When cmake is run with -DLLVM_ENABLE_PIC=OFF, build fails while
linking shared library libLTO.so, because its dependencies are built
with -fno-PIC. More details here: https://llvm.org/bugs/show_bug.cgi?id=26484.
This diff reverts r252652 (git 9fd4377ddb83aee3c049dc8757e7771edbb8ee71),
which removed check NOT LLVM_ENABLE_PIC before disabling build for libLTO.so.
Patch by Igor Sugak!
Differential Revision: http://reviews.llvm.org/D17049
llvm-svn: 260703
Multi-dso programs result in multiple coverage files dumped of the form
'<module_name>.<pid>.sancov'. When analyzing these coverage files it is
important to use correct corresponding object file.
This change removes the "-obj" sancov flag and lets user specify object
file names alongside coverage files. Sancov tool would match them using
<module_name> part of coverage file and short file name of the object
file.
Corresponding changes:
- compiler-rt: http://reviews.llvm.org/D17171
- docs: http://reviews.llvm.org/D17175
Differential Revision: http://reviews.llvm.org/D17169
llvm-svn: 260628
Summary: This required to add binding to Instruction::removeFromParent so that instruction can be forward declared and then moved at the right place.
Reviewers: bogner, chandlerc, echristo, dblaikie, joker.eph, Wallbraker
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D17057
llvm-svn: 260597
The rational for this change is that LLVMBuild cannot express conditional
dependencies. Therefore, when we start optionally using GlobalISel library for
say AArch64, without that change, all the tools that use the AArch64 library
would need to explicitly link with GlobalISel when we ask for it.
This does not scale.
Instead, we will set the dependencies between the target and GlobalISel and if
we did not ask to build GlobalISel, the library will just be empty.
Thanks to Chris Bieneman and Mehdi Animi for the idea.
llvm-svn: 260566
This adds support for finding the dynamic table and dynamic symbol table via
the section table or the program header table. If there's no section table an
attempt is made to figure out the length of the dynamic symbol table.
llvm-svn: 260488
This restores commit r260408, along with a fix for a bot failure.
The bot failure was caused by dereferencing a unique_ptr in the same
call instruction parameter list where it was passed via std::move.
Apparently due to luck this was not exposed when I built the compiler
with clang, only with gcc.
llvm-svn: 260442
New option --elf-output-style=LLVM or GNU
Enables -file-headers in readelf style when elf-output-style=GNU
Differential revision: http://reviews.llvm.org/D14128
llvm-svn: 260430
Summary:
This patch uses the lower 64-bits of the MD5 hash of a function name as
a GUID in the function index, instead of storing function names. Any
local functions are first given a global name by prepending the original
source file name. This is the same naming scheme and GUID used by PGO in
the indexed profile format.
This change has a couple of benefits. The primary benefit is size
reduction in the combined index file, for example 483.xalancbmk's
combined index file was reduced by around 70%. It should also result in
memory savings for the index file in memory, as the in-memory map is
also indexed by the hash instead of the string.
Second, this enables integration with indirect call promotion, since the
indirect call profile targets are recorded using the same global naming
convention and hash. This will enable the function importer to easily
locate function summaries for indirect call profile targets to enable
their import and subsequent promotion.
The original source file name is recorded in the bitcode in a new
module-level record for use in the ThinLTO backend pipeline.
Reviewers: davidxl, joker.eph
Subscribers: llvm-commits, joker.eph
Differential Revision: http://reviews.llvm.org/D17028
llvm-svn: 260408
New option --elf-output-style=LLVM or GNU
Enables -file-headers in readelf style when elf-output-style=GNU
Differential revision: http://reviews.llvm.org/D14128
llvm-svn: 260391
This patch uses one bit in profile version to differentiate Clang
instrumentation and IR level instrumentation profiles.
PGOInstrumenation generates a COMDAT variable __llvm_profile_raw_version so
that the compiler runtime can set the right profile kind.
For Maco-O platform, we generate the variable as linkonce_odr linkage as
COMDAT is not supported.
PGOInstrumenation now checks this bit to make sure it's an IR level
instrumentation profile.
The patch was submitted as r260164 but reverted due to a Darwin test breakage.
Original Differential Revision: http://reviews.llvm.org/D15540
Differential Revision: http://reviews.llvm.org/D17020
llvm-svn: 260385
This patch adds a new class, OrcI386, which contains the hooks needed to
support lazy-JITing on i386 (currently only for Pentium 2 or above, as the JIT
re-entry code uses the FXSAVE/FXRSTOR instructions).
Support for i386 is enabled in the LLI lazy JIT and the Orc C API, and
regression and unit tests are enabled for this architecture.
llvm-svn: 260338
Summary: As per title. This also include extra support for insertvalue and extracvalue.
Reviewers: bogner, chandlerc, echristo, dblaikie, joker.eph, Wallbraker
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D17055
llvm-svn: 260335
Summary: As per title. This remove the need to rely on internal knowledge of call and invoke instruction to find called value and argument count.
Reviewers: bogner, chandlerc, echristo, dblaikie, joker.eph, Wallbraker
Differential Revision: http://reviews.llvm.org/D17054
llvm-svn: 260332
Summary: This is a bit of refactoring required to be able to generate instruction in forward basic block. This, for instance, is a requirement for phi in loops.
Reviewers: bogner, chandlerc, echristo, dblaikie, joker.eph, Wallbraker
Differential Revision: http://reviews.llvm.org/D17050
llvm-svn: 260324
Summary: As per title. Also add a facility method to get the name of a basic block from the C API.
Reviewers: bogner, chandlerc, echristo, dblaikie, joker.eph, Wallbraker
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D16912
llvm-svn: 260309
This reverts commit r259578.
There are enough issues with this small patch that it is better to
revert and then commit a fixed version (will be committed shortly).
llvm-svn: 260285
Summary:
This patch adds Windows support for a few of the llvm-config commands,
including cflags, ldflags, libs, and system-libs.
Currently llvm-config is untested, so this patch adds tests for the
commands that it fixes as well.
Reviewers: rnk
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D16762
llvm-svn: 260263
It is possible to have .got section and one or more zero-sized section
at the same address. This patch first checks that GOT (or GOT PLT)
section should have non-zero size using corresponding dynamic tags. Then
it looks up not empty section at the specified address.
Differential Revision: http://reviews.llvm.org/D16968
llvm-svn: 260245
It was using format() with a string for 64-bit types but was
passed a 32-bit type in places when printing values for
32-bit Mach-O files.
rdar://24542509
llvm-svn: 260243
This patch uses one bit in profile version to differentiate Clang
instrumentation and IR level instrumentation profiles.
PGOInstrumenation generates a COMDAT variable __llvm_profile_raw_version so
that the compiler runtime can set the right profile kind.
PGOInstrumenation now checks this bit to make sure it's an IR level
instrumentation profile.
Differential Revision: http://reviews.llvm.org/D15540
llvm-svn: 260146
a significant fraction of the file size (for files that otherwise have few
records). Also include an average size per record in the summary information.
llvm-svn: 259965
This makes it less likely to clash with other stuff that might be linked
in by change, e.g. ncurses exposes an external function called simply
"echo", so linking ncurses statically into the binary explodes in funny
ways.
llvm-svn: 259882
Summary: This diff increase the tested surface of the C API.
Reviewers: bogner, chandlerc, echristo, dblaikie, joker.eph, Wallbraker
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D16910
llvm-svn: 259863
Summary: As per title. It is required and don't get linked in in some builds.
Reviewers: chapuni, joker.eph
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D16903
llvm-svn: 259853
Summary computation is not just for instrumented profiling and so I have moved
the ProfileSummary class to ProfileCommon.h (named so to allow code unrelated
to summary but common to instrumented and sampled profiling to be placed there)
Differential Revision: http://reviews.llvm.org/D16661
llvm-svn: 259846
Summary:
This basically add an echo test case in C. The support is limited right now, but full support would just be too much to review at once.
The echo test case simply get a module as input and try to output the same exact module. This allow to check the both reading and writing API are working as expected.
I want to improve this test over time to support more and more of the API, in order to improve coverage (coverage is quite poor right now).
Test Plan: Run the test.
Reviewers: chandlerc, bogner
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D10725
llvm-svn: 259844
Mehdi Amini