This has two advantages:
1) We slowly move away from ErrorOr to the new handling interface,
in the hope of having an uniform error handling in LLVM, eventually.
2) We're starting to have *meaningful* error messages for invalid
object ELF files, rather than a generic "parse error". At some point
we should include also the offset to improve the quality of the
diagnostic.
llvm-svn: 287081
the offsets and sizes of an element of the Mach-O file overlaps with
another element in the Mach-O file.
Some other tests for malformed Mach-O files now run into these
checks so their tests were also adjusted.
llvm-svn: 285860
the offsets and sizes of an element of the file overlaps with
another element in the Mach-O file.
This shows the approach to this testing for three elements
and contains for tests for their overlap. Checking for all the
remain elements will be added next.
llvm-svn: 285632
with fix: edited invalid-section-index2.elf input to pass the new check and
fail on the same place it was intended to fail.
Original commit message:
Elf.h already has code checking that section table does not go past end of file.
Problem is that this check may not work on values greater than UINT64_MAX / Header->e_shentsize
because of calculation overflow.
Parch fixes the issue.
Differential revision: https://reviews.llvm.org/D25432
llvm-svn: 285586
obsolete load commands.
Again the philosophy of the error checking in libObject for
Mach-O files, the idea behind the checking is that we never
will return a Mach-O file out of libObject that contains unknown
things the library code can’t operate on. So known obsolete
load commands will cause a hard error.
Also to make things clear I have added comments to the
values and structures in Support/Mach-O.h and
Support/MachO.def as to what is obsolete.
As noted in a TODO in the code, there may need to be a
non-default mode to allow some unknown values for well
structured Mach-O files with things like unknown load
load commands. So things like using an old lldb on a newer
Mach-O file could still provide some limited functionality.
llvm-svn: 285342
Elf.h already has code checking that section table does not go past end of file.
Problem is that this check may not work on values greater than UINT64_MAX / Header->e_shentsize
because of calculation overflow.
Parch fixes the issue.
Differential revision: https://reviews.llvm.org/D25432
llvm-svn: 285285
Revealed using "id_000038,sig_11,src_000015,op_havoc,rep_16" from PR30540,
when sh_size was 0, crash happened.
Differential revision: https://reviews.llvm.org/D25091
llvm-svn: 285282
Most of the version of report_error were quoting the filename and
printing a colon between the file name and the error message, but this
one wasn't doing either of those. Fix the output to be more
consistent.
llvm-svn: 285252
load commands that use the MachO::twolevel_hints_command type
which includes only the LC_TWOLEVEL_HINTS load command.
This is not used in llvm libObject code or in llvm tool code. But
does appear in one of the binary test files. While this load command is
obsolete it is easier to add code for it in libObject than edit or change
the binary test case.
llvm-svn: 284769
load commands that use the MachO::thread_command type
but are not used in llvm libObject code but used in llvm tool code.
This includes the LC_UNIXTHREAD and LC_THREAD
load commands.
A quick note about the philosophy of the error checking in
libObject for Mach-O files, the idea behind the checking is
that we never will return a Mach-O file out of libObject that
contains unknown things in the load commands.
To do this the 32-bit ARM and PPC general tread states
needed to be defined as two test case binaries contained
them. If other thread states for other CPUs need to be
added we will do that as needed.
Going forward the LC_MAIN load command is used to
set the entry point in Mach-O executables these days
instead of an LC_UNIXTHREAD as was done in the past.
So today only in core files are LC_THREAD load commands
and thread states usually found.
Other thread states have not yet been defined in
include/Support/MachO.h at this time. But that can be
added as needed with their corresponding checking also
added.
llvm-svn: 284668
load command that use the MachO:: linkedit_data_command
type but is not used in llvm libObject code but used in llvm tool code.
This is for the LC_CODE_SIGNATURE load command.
llvm-svn: 284529
load commands that use the MachO::routines_command and
and MachO::routines_command_64 types but are not used in llvm
libObject code but used in llvm tool code.
This includes the LC_ROUTINES and LC_ROUTINES_64
load commands.
llvm-svn: 284504
load commands that use the MachO::sub_framework_command,
MachO::sub_umbrella_command, MachO::sub_library_command
and MachO::sub_client_command types but are not used in llvm
libObject code but used in llvm tool code.
This includes the LC_SUB_FRAMEWORK, LC_SUB_UMBRELLA,
LC_SUB_LIBRARY and LC_SUB_CLIENT load commands.
llvm-svn: 284431
Patch checks that section pointer is aligned properly.
This should be done before getStringTable() call.
Differential revision: https://reviews.llvm.org/D25462
llvm-svn: 284387
With fix: hex edited the precompiled inputs from another testcases to pass new checks.
Original commit message:
[Object/ELF] - Check that e_shnum is null when e_shoff is.
Spec says (http://www.sco.com/developers/gabi/1998-04-29/ch4.eheader.html) :
e_shnum
This member holds the number of entries in the section header table. Thus the product of e_shentsize and e_shnum gives the section header table's size in bytes. If a file has no section header table, e_shnum holds the value zero.
Revealed using "id_000037,sig_11,src_000015,op_havoc,rep_8" from PR30540
That was the reason of crash in lld on incorrect input file.
Binary reduced using afl-min.
Differential revision: https://reviews.llvm.org/D25090
llvm-svn: 284374
Spec says (http://www.sco.com/developers/gabi/1998-04-29/ch4.eheader.html) :
e_shnum
This member holds the number of entries in the section header table. Thus the product of e_shentsize and e_shnum gives the section header table's size in bytes. If a file has no section header table, e_shnum holds the value zero.
Revealed using "id_000037,sig_11,src_000015,op_havoc,rep_8" from PR30540
That was the reason of crash in lld on incorrect input file.
Binary reduced using afl-min.
Differential revision: https://reviews.llvm.org/D25090
llvm-svn: 284371
If object has wrong (large) string table index and
also incorrect large value for amount of sections in total,
then section index passes the check:
if (Index >= getNumSections())
return object_error::invalid_section_index;
But result pointer then is far after end of file data, what
result in a crash.
Differential revision: https://reviews.llvm.org/D25081
llvm-svn: 284369
Added relocation names:
- R_AMDGPU_GOTPCREL32_LO
- R_AMDGPU_GOTPCREL32_HI
- R_AMDGPU_REL32_LO
- R_AMDGPU_REL32_HI
AMDGPU isa only supports 32-bit immediates. In order to access 64-bit address we need to generate 32-bit lo/hi relocations, and do the right math (separate patch). Currently we only generate one 32 bit relocation for lower bits for each access, losing higher bits. Hence we need relocations listed above.
Differential Revision: https://reviews.llvm.org/D25546
llvm-svn: 284191
load commands that uses the MachO::linker_option_command
type but not used in llvm libObject code but used in llvm tool code.
This includes just LC_LINKER_OPTION load command.
llvm-svn: 283939
Bot does not like it: http://lab.llvm.org:8011/builders/sanitizer-x86_64-linux-fast/builds/17075
/mnt/b/sanitizer-buildbot3/sanitizer-x86_64-linux-fast/build/llvm/test/Object/invalid.test:70:32: error: expected string not found in input
INVALID-SEC-ADDRESS-ALIGNMENT: Invalid address alignment of section headers
^
<stdin>:1:1: note: scanning from here
/mnt/b/sanitizer-buildbot3/sanitizer-x86_64-linux-fast/build/llvm/include/llvm/Object/ELF.h:412:7: runtime error: upcast of misaligned address 0x000002d8b899 for type 'llvm::object::Elf_Shdr_Impl<llvm::object::ELFType<llvm::support::endianness::little, true> >', which requires 2 byte alignment
^
<stdin>:1:125: note: possible intended match here
/mnt/b/sanitizer-buildbot3/sanitizer-x86_64-linux-fast/build/llvm/include/llvm/Object/ELF.h:412:7: runtime error: upcast of misaligned address 0x000002d8b899 for type 'llvm::object::Elf_Shdr_Impl<llvm::object::ELFType<llvm::support::endianness::little, true> >', which requires 2 byte alignment
llvm-svn: 283858
sections_begin() may return unalignment pointer when Header->e_shoff isinvalid.
That may result in a crash in clients, for example we have one in LLD:
assert((PtrWord & ~PointerBitMask) == 0 &&
"Pointer is not sufficiently aligned");
fails when trying to push_back Elf_Shdr* (unaligned) into TinyPtrVector.
Patch forces check for alignment of Header->e_shoff.
Differential revision: https://reviews.llvm.org/D25368
llvm-svn: 283740
load commands that uses the MachO::encryption_info_command and
MachO::encryption_info_command types but not used in llvm libObject
code but used in llvm tool code.
This includes just LC_ENCRYPTION_INFO and
LC_ENCRYPTION_INFO_64 load commands.
llvm-svn: 283250
Previously code would access invalid memory and may crash,
patch fixes the issue.
Differential revision: https://reviews.llvm.org/D25187
llvm-svn: 283204
When using broken input object found using AFL,
getExtendedSymbolTableIndex() crashed because ShndxTable
was empty as object does not contain SHT_SYMTAB_SHNDX section.
Differential revision: https://reviews.llvm.org/D25189
llvm-svn: 283196
load command that uses the MachO::entry_point_command type
but not used in llvm libObject code but used in llvm tool code.
This includes just the LC_MAIN load command.
llvm-svn: 282766
load command that uses the Mach::source_version_command type
but not used in llvm libObject code but used in llvm tool code.
This includes just the LC_SOURCE_VERSION load command.
llvm-svn: 282736
load command that uses the Mach::rpath_command type
but not used in llvm libObject code but used in llvm tool code.
This includes just the LC_RPATH load command.
llvm-svn: 282649
other load commands that use the Mach::version_min_command type
but not used in llvm libObject code but used in llvm tool code.
This includes LC_VERSION_MIN_MACOSX, LC_VERSION_MIN_IPHONEOS,
LC_VERSION_MIN_TVOS and LC_VERSION_MIN_WATCHOS load commands.
llvm-svn: 282635
other load commands that use the MachO::dylinker_command type
but not used in llvm libObject code but used in llvm tool code.
This includes LC_ID_DYLINKER, LC_LOAD_DYLINKER
and LC_DYLD_ENVIRONMENT load commands.
llvm-svn: 282553
other load commands that use the Mach::linkedit_data_command type
but not used in llvm libObject code but used in llvm tool code.
This includes LC_FUNCTION_STARTS, LC_SEGMENT_SPLIT_INFO
and LC_DYLIB_CODE_SIGN_DRS load commands.
llvm-svn: 282441
load commands. Added a missing check and made the check for more than
one like other other “more than one” checks. And of course added test cases.
llvm-svn: 282104
that use the Mach::dylib_command type for the load commands that are
currently used in the MachOObjectFile constructor.
This contains the missing checks for LC_ID_DYLIB, LC_ID_DYLIB, etc.
load commands and the fields for the Mach::dylib_command type.
Also checks that only an MH_DYLIB or MH_STUB_DYLIB has an
LC_ID_DYLIB load command (and others filetype don’t) and there
is not more than one of these load commands.
llvm-svn: 282008
Summary:
It was previously not possible for tools to use solely the stackmap
information emitted to reconstruct the return addresses of callsites in
the map, which is necessary to use the information to walk a stack. This
patch adds per-function callsite counts when emitting the stackmap
section in order to resolve the problem. Note that this slightly alters
the stackmap format, so external tools parsing these maps will need to
be updated.
**Problem Details:**
Records only store their offset from the beginning of the function they
belong to. While these records and the functions are output in program
order, it is not possible to determine where the end of one function's
records are without the callsite count when processing the records to
compute return addresses.
Patch by Kavon Farvardin!
Reviewers: atrick, ributzka, sanjoy
Subscribers: nemanjai
Differential Revision: https://reviews.llvm.org/D23487
llvm-svn: 281532
that use the Mach::dyld_info_command type for the load commands that are
currently use in the MachOObjectFile constructor.
This contains the missing checks for LC_DYLD_INFO and
LC_DYLD_INFO_ONLY load commands and the fields for the
Mach::dyld_info_command type.
llvm-svn: 281400
Davide Italiano